HVR-V1J/V1U/V1N/V1E/V1P/V1C

Transcription

1 SERVICE MANUAL Ver Revision History How to use Acrobat Reader RMT-831 US Model Canadian Model AEP Model E Model Chinese Model Japanese Model N MECHANISM (MDX-N111) Link SPECIFICATIONS MODEL INFORMATION TABLE SERVICE NOTE DISASSEMBLY BLOCK DIAGRAMS FRAME SCHEMATIC DIAGRAMS SCHEMATIC DIAGRAMS PRINTED WIRING BOARDS REPAIR PARTS LIST ADJUSTMENT INSTRUCTION MANUAL The components identified by mark 0 or dotted line with mark 0 are critical for safety. Replace only with part number specified. Les composants identifiés par une marque 0 sont critiques pour la sécurité. Ne les remplacer que par une pièce portant le numéro spécifié. DIGITAL HD VIDEO CAMERA RECORDER Sony EMCS Co. 2006K Published by Kohda TEC

2 NOTE (1/2) TO (2/2) NOTE: Characters A to Z of the electrical parts list indicate location of exploded views in which the desired part is shown. Link EXPLODED VIEWS A B C D OVERALL SECTION-1 OVERALL SECTION-2 OVERALL SECTION-3 LENS SECTION E F G H BT BLOCK CABINET (R) SECTION LCD PANEL BLOCK CABINET (L) SECTION I J K L CABINET (L) BLOCK HANDLE SECTION EVF BLOCK HANDLE BLOCK M N O MECHANISM DECK SECTION LS/MECHANICAL CHASSIS BLOCK ASSEMBLY-1 LS/MECHANICAL CHASSIS BLOCK ASSEMBLY-2

3 NOTE (2/2) TO (1/2) ELECTRICAL PARTS LIST ACCESSORIES EE-006 BOARD D FP-487 FLEXIBLE BOARD G PP-003 BOARD G FP-031 FLEXIBLE BOARD O FP-488 FLEXIBLE BOARD L RR-003 BOARD F FP-032 FLEXIBLE BOARD O GG-003 BOARD J TT-003 BOARD C FP-228 FLEXIBLE BOARD O HH-003 BOARD F UU-003 BOARD K FP-483 FLEXIBLE BOARD J II-003 BOARD C WW-003 BOARD F FP-484 FLEXIBLE BOARD J JJ-004 BOARD D XX-015 BOARD L FP-485 FLEXIBLE BOARD H NN-003 BOARD B YY-003 BOARD C FP-486 FLEXIBLE BOARD F OO-003 BOARD C ZZ-003 BOARD L

4 (ENGLISH) NOTE: -XX, -X mean standardized parts, so they may have some differences from the original one. Items marked * are not stocked since they are seldom required for routine service. Some delay should be anticipated when ordering these items. The mechanical parts with no reference number in the exploded views are not supplied. Due to standardization, replacements in the parts list may be different from the parts specified in the diagrams or the components used on the set. CAPACITORS: uf: µf COILS uh: µh RESISTORS All resistors are in ohms. METAL: metal-film resistor METAL OXIDE: Metal Oxide-film resistor F: nonflammable SEMICONDUCTORS In each case, u: µ, for example: ua...: µa..., upa..., µpa..., upb..., µpb..., upc..., µpc..., upd..., µpd... (JAPANESE) * When indicating parts by reference number, please include the board name. The components identified by mark 0 or dotted line with mark 0 are critical for safety. Replace only with part number specified. Les composants identifiés par une marque 0 sont critiques pour la sécurité. Ne les remplacer que par une pièce portant le numéro spécifié. Color Indication of Appearance Parts Example: (SILVER) : Cabinet s Color (Silver) : Parts Color 0 0 Abbreviation AR : Argentine model AUS : Australian model BR : Brazilian model CH : Chinese model CND : Canadian model EE : East European model HK : Hong Kong model J : Japanese model JE : Tourist model KR : Korea model NE : North European model 5-1

5 5-1. EXPLODED VIEWS OVERALL SECTION-1 DISASSEMBLY Cabinet (L) Section (See Page 5-9) Handle Section (See Page 5-11) 1 Overall Section-2 (See Page 5-3) CABINET, TOP SCREW (M2), NEW TRUSTER, P2 (Black) 5-2

6 DISASSEMBLY OVERALL SECTION-2 Overall Section-3 (See Page 5-4) Mechanism Deck Section (See Page 5-14) Cabinet (R) Section (See Page 5-7) 58 # NN BRACKET (TRIPOD) PLATE, BOTTOM FP-496 FLEXIBLE BOARD FP-493 FLEXIBLE BOARD COVER (F), HINGE FP-491 FLEXIBLE BOARD 57 A A NN-003 BOARD, COMPLETE * 58 X FRAME ASSY, MD # SCREW (M1.4X1.5) (Silver) SCREW (M2), NEW TRUSTER, P2 (Black) SCREW (M2), NEW TRUSTER, P2 (Red) 5-3

7 DISASSEMBLY OVERALL SECTION-3 : not supplied J YY (Note) BT Block (See Page 5-6) 112 Le Section (See Page 5-5) Refer to page 5-1 for mark 0. Note: Note: Refer to page 2-1 Note for disconnecting the harness (coaxial cable) when changing the harness (coaxial cable). 101 A A YY-003 BOARD, COMPLETE 102 A A TT-003 BOARD, COMPLETE (SERVICE) (NTSC: V1J/V1U/V1N) 102 A A TT-003 BOARD, COMPLETE (SERVICE) (PAL: V1E/V1P/V1C) FP-492 FLEXIBLE BOARD 104 A A OO-003 BOARD, COMPLETE * SHEET (TP) FP-495 FLEXIBLE BOARD 107 X CABINET (L) ASSY (D), JACK DC, JACK LID 109 A A II-003 BOARD, COMPLETE * HOLDER, JACK PC BOARD (L) LID, CPC FP-494 FLEXIBLE BOARD * CUSHION, LIGHT INTERCEPTION * SPACER (DZ) * SHEET (GF) * SHEET (TT) 0 J CONNECTOR, DC-IN SCREW (M2), NEW TRUSTER, P2 (Black) SCREW (M2), NEW TRUSTER, P2 (Red) SCREW, TAPPING, P2 (Black) 5-4

8 DISASSEMBLY LENS SECTION : not supplied (Note 3) # (Note 3) # (EE-006 Complete Board and IC5601 (CMOS Imager)) (Note 1, 2) (Note 3) #54 # # (8mm x 18mm) # CAUTION: For the part of 165, cut WOVEN (T0.25), FABRIC NON ( ) into the desired length and use it. Note 1: Note 1: EE-006 complete board and IC5601 are not supplied, but they are included in prism assy. Note 2: Note 2: Be sure to read Precautio for Replacement of Imager on page 4-3 when changing the imager. Note 3: Note 3: Refer to page 2-1 Note for disconnecting the harness (coaxial cable) when changing the harness (coaxial cable). * 151 X BRACKET (VC) ASSY 152 A A JJ-004 BOARD, COMPLETE (SERVICE) RING UNIT (B187B (SERVICE)) 154 X CHASSIS ASSY (D), CENTER * RETAINER, ND KNOB * KNOB, ND * PLATE, ND CLICK RING, ORNAMENTAL SWITCH BLOCK, CONTROL (CK18500) 160 A A PRISM ASSY (SERVICE) (Note 1, 2) * PLATE (CMOS), INTERCEPTION * 162 X BRACKET (CL) ASSY 163 A A UNIT ASSY (B187B (SERVICE)) HARNESS (COAXIAL CABLE) (Note 3) 165 CAUTION WOVEN (T0.25), FABRIC NON # SCREW (M1.7) (Silver) SCREW (M2), NEW TRUSTER, P2 (Black) SCREW (M2), NEW TRUSTER, P2 (Red) # SCREW (M2X2.5) (Silver) # SCREW, TAPPING, P2 (Black) # SCREW, PRECISION +P 1.7X4 TYPE3 (Black) # SCREW (B2), TAPPING, P3 (Silver) 5-5

9 BT BLOCK : not supplied 205 # # BT Refer to page 5-1 for mark COVER, BT LOCK CLAW, BT LOCK SHAFT, BT SHEET METAL (L), STRAP COVER, BT RELEASE RELEASE (SW) SPRING, COMPRESSION PANEL, BATTERY FOOT, RUBBER 0 BT TERMINAL BOARD, BATTERY # SCREW, TAPPING, P2 (Black) 5-6

10 DISASSEMBLY CABINET (R) SECTION BT9601 : not supplied (Note) BH9601 (Note) 251 RR SP WW Note: Replace the battery holder (BH9601) together when replacing the lithium battery (BT9601) on the RR-003 board. (The battery holder removed once cannot be used again.) When mounting these parts, mount new battery holder first and attach new lithium battery next. Note: #1 252 LCD Panel Block (See Page 5-8)! : BT9601 (BATTERY, LITHIUM SECONDARY) Board on the mount position. (See page 4-56.) CAUTION Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. 注意電池の交換は, 正しく行わないと破裂する恐れがあります 電池を交換する場合には必ず同じ型名の電池又は同等品と交換してください Refer to page 5-1 for mark TAPE (A) 252 X CABINET (R) ASSY (D) 253 A A RR-003 BOARD, COMPLETE * PLATE, CF RETAINER SWITCH BLOCK, CONTROL (CF18500) LID, HEADPHONE 257 A A HH-003 BOARD, COMPLETE NUT (M6X0.5) * SHEET (HH), INSULATING 260 A A WW-003 BOARD, COMPLETE * FRAME, JACK FIXED 262 A A FP-486 FLEXIBLE BOARD, COMPLETE * SHEET (HH) * 264 X RETAINER ASSY, SP 265 X LID (R) ASSY, JACK 0 BH HOLDER, BATTERY (Note) 0 BT BATTERY, STORAGE, LITHIUM (Note) SP LOUD SPEAKER (1.6CM) # SCREW (M1.7) (Black) SCREW (M2), NEW TRUSTER, P2 (Red) SCREW, TAPPING, P2 (Black) 5-7

11 LCD PANEL BLOCK LCD901 D PP #1 307 #1 305 # CABINET (L), PANEL * CUSHION, LCD 303 X FRAME ASSY, PANEL 304 A A PP-003 BOARD, COMPLETE 305 X CABINET (R) ASSY (D), PANEL COVER (R), HINGE 307 X HINGE ASSY COVER (REAR), HINGE HARNESS (PR-074) 310 A A FP-487 FLEXIBLE BOARD, COMPLETE D BLOCK, LIGHT GUIDE PLATE (3.5) LCD ACX545AKA-1 # SCREW (M1.7) (Black) SCREW (M2), NEW TRUSTER, P2 (Black) SCREW (M2), NEW TRUSTER, P2 (Red) 5-8

12 DISASSEMBLY CABINET (L) SECTION Cabinet (L) Block (See Page 5-10) SWITCH BLOCK, CONTROL (PL18500) COVER, GRIP 355 A A FP-485 FLEXIBLE BOARD, COMPLETE * 356 X FRAME ASSY, CS SCREW (M2), NEW TRUSTER, P2 (Red) SCREW, TAPPING, P2 (Black) 5-9

13 CABINET (L) BLOCK : not supplied BELT, GRIP * HOLDER, GRIP BELT 403 X CABINET (L) ASSY (D) * BRACKET (R), GRIP BELT FOOT, RUBBER * RETAINER, PS SWITCH BLOCK, CONTROL (PS18500) * PLATE, PS FIXED * BRACKET (F), GRIP BELT SCREW (M2), NEW TRUSTER, P2 (Black) SCREW, TAPPING, P2 (Black) 5-10

14 DISASSEMBLY HANDLE SECTION : not supplied EVF Block (See Page 5-12) 453 # # (11mm x 11mm) # Handle Block (See Page 5-13) CAUTION: For the part of 462: TAPE (11X11) ( ), cut WOVEN (T0.25), FABRIC NON ( ) into the desired length and use it. 451 A A FP-483 FLEXIBLE BOARD, COMPLETE FP-499 FLEXIBLE BOARD 453 X CABINET (UPPER) ASSY (D), HAN * CUSHION, LIGHT INTERCEPTION FP-500 FLEXIBLE BOARD 456 A A GG-003 BOARD, COMPLETE 457 X BASE ASSY (D), REMOTE CONTROL WASHER, SCREW STOPPER BASE, MICROPHONE HOLDER * KEY, RUBBER TACT 461 A A FP-484 FLEXIBLE BOARD, COMPLETE 462 CAUTION TAPE (11X11) BASE, 2ND KEY 464 X HOLDER ASSY, MICROPHONE RETAINER (UPPER) D, HOLDER SCREW (M2), NEW TRUSTER, P2 (Black) SCREW (M2), NEW TRUSTER, P2 (Red) SCREW, TAPPING, P2 (Black) # SCREW, TAPPING, P2 (Silver) # SCREW +B 3X10 (Black) # SCREW (M5) (Black) 5-11

15 EVF BLOCK # LCD X HOLDER ASSY, VF PANEL 502 X FINDER ASSY CUSHION, VF PANEL SHEET (1), VF PRISM SHEET (2), VF DIFFUSION LAMP, VF HOLDER, 507 A A UU-003 BOARD, COMPLETE FP-501 FLEXIBLE BOARD 509 X CABINET ASSY (D), VF 510 X TILT ASSY, VF EYE CUP LCD LCX068AK SCREW, TAPPING, P2 (Black) # SCREW, TAPPING, P2 (Black) 5-12

16 HANDLE BLOCK : not supplied #60 ZZ # # # XX CABINET (L), XL * SHEET METAL, XL 553 A A XX-015 BOARD, COMPLETE 554 A A ZZ-003 BOARD, COMPLETE CABLE, FLEXIBLE FLAT (FFC-088) SPRING SHOE, ACCESSORY * TAPE (XR) 559 A A FP-488 FLEXIBLE BOARD, COMPLETE SHEET METAL, XL BELT SHEET (D), POWDER PREVENTION SWITCH BLOCK, CONTROL (XR91030) CABINET (R), XL 564 X CABINET ASSY (D), HANDLE CLAMP, CABLE SCREW (M2), NEW TRUSTER, P2 (Black) SCREW (M2), NEW TRUSTER, P2 (Red) SCREW, TAPPING, P2 (Black) # SCREW 0+P2 M2 NEWTRU-STAR (Silver) # BOLT (M2.6) (Black) # SCREW (M2), LOCK ACE, P2 (Silver) 5-13

17 MECHANISM DECK SECTION : not supplied M LS chassis block assembly (See page 5-15) X PENDULUM ASSY LED BASE SCREW, PRECISION +P 1.4X RELEASE, REEL LOCK SCREW (M1.4X1.4), SPECIAL HEAD 706 X COMPARTMENT ASSY, CASSETTE SPRING (ARM S), TENSION COIL SCREW (M1.4) PLATE, TOP SPRING (ARM T), TENSION COIL SHEET, FLEXIBLE ADHESIVE TG6 CATCHER 713 A A MD (N100) SUB ASSY A SCREW (M1.4X2.0), SPECIAL HEAD WASHER M901 A A DRUM (DEH-33B-R) 5-14

18 LS/MECHANICAL CHASSIS BLOCK ASSEMBLY-1 : not supplied (Note) 772 (Note) LS / Mechanical chassis block assembly-2 (See page 5-16) 755 Note: These two screws are the fixing screws of the LS cam plate. These two fixing screws are used for adjsting the LS cam plate position. (refar to 4-2. LS cam adjustment of DV mechanical adjustment manual IX) SPRING, RVS BRAKE 752 A A BLOCK ASSY, RVS BRAKE POSITIONING, S 754 A A BLOCK ASSY, S BRAKE SCREW (M1.4X1.4), SPECIAL HEAD 756 X TABLE ASSY, S REEL 757 A B BLOCK ASSY, TENSION REGULATOR GEAR (T), GL SPRING, TENSION REGULATOR 760 X TABLE ASSY, T REEL 761 X ARM ASSY, PINCH SPRING (PINCH RETURN), TORSION SPRING (RETURN TG6), EXTENSION 764 A A BLOCK ASSY, TG6 765 X ARM ASSY (S), GL 766 X COASTER (S) ASSY RAIL SCREW (M1.4X2.0), SPECIAL HEAD 769 X COASTER (T) ASSY 770 X ARM (T) ASSY, GL SPRING (T), TORSION COIL SCREW (M1.4X1.4), SPECIAL HEAD (for adjustment) 5-15

19 LS/MECHANICAL CHASSIS BLOCK ASSEMBLY-2 : not supplied Q901 D902 Q902 S901 M MIC903 H901 FP-031 (Note 1) H (Note2) FP-032 (Note 1, 2) 804 FP-031 (Note 1) Note1: The FP-031 and FP-032 are supplied as the assembled part of the MD (N100) sub ass'y A by attaching them with the adhesive agent. These parts are not separately supplied because assembling of these parts requires high accuracy. Note2: The mode switch (S903) function works when the contactor of the FP-032 contacts with the bottom surface of wiper of the mode gear ass'y SPRING (PINCH LIMITTER), EXTENSION 802 X SLIDER ASSY, MODE 803 X GEAR ASSY, CAM SCREW (M1.4X1.4), SPECIAL HEAD GEAR, RELAY BASE, MOTOR HOLDER FP-228 FLEXIBLE BOARD (DEW SENSOR) COVER, CAPSTAN MIC COVER SCREW (M1.4X2.0), SPECIAL HEAD WASHER GEAR, CONVERSION HEAD (SCREW M1.2) 810 X BASE ASSY, CAM 811 X GEAR ASSY, MODE GEAR, NO GEAR, NO MOTOR HOLDER SCREW (M1.2X2), SPECIAL, WORM SHAFT (2J) D DIODE GL453SE0000F (TAPE LED) H ELEMENT, HOLE HW-105A-CDE-T (S REEL) H ELEMENT, HOLE HW-105A-CDE-T (T REEL) M902 X MOTOR ASSY (LOADING) MIC PIN, CONNECTOR (WITH DETECTION) Q TRANSISTOR PT4850FJE00F (TAPE END) Q TRANSISTOR PT4850FJE00F (TAPE TOP) S SWITCH, PUSH (1 KEY) (CC DOWN) 5-16

20 EXCEPT J MODEL Checking supplied accessories. to J MODEL Note: This item is supplied with the unit as an accessory, but is not prepared as a service part. AC Adaptor (AC-L15A) Power Cord (CH) (US, CND) (AEP, E) Conversion (2P) Adaptor (E: NTSC) CD-ROM Manuals for Digital HD Video Camera Recorder Other accessories USB Cable Rechargeable Battery Pack NP-F570 (Note) A/V Connection Cable Component Video Cable MANUAL, INSTRUCTION (PDF) (JAPANESE) (Note) MANUAL, INSTRUCTION (PRINTED MATERIAL/PDF) (ENGLISH) (US, CND, E) (Note) MANUAL, INSTRUCTION (PDF) (FRENCH) (Note) MANUAL, INSTRUCTION (PRINTED MATERIAL/PDF) (ENGLISH) (AEP, E) (Note) MANUAL, INSTRUCTION (PRINTED MATERIAL/PDF) (SIMPLIFIED CHINESE) (CH) (Note) MANUAL, INSTRUCTION (PDF) (FRENCH) (Note) MANUAL, INSTRUCTION (PDF) (SPANISH) (Note) MANUAL, INSTRUCTION (PDF) (ITALIAN) (Note) MANUAL, INSTRUCTION (PDF) (GERMAN) (Note) Wireless Remote Commander RMT Wind Screen, Microphone Large Eyecup Le Hood with Le Cover Note: INSTRUCTION MANUAL (PDF) of each language are included in CD-ROM Manuals for Digital HD Video Camera Recorder. Refer to page 5-1 for mark