MODEL: PE770 DZ820E SB7900E NV770E

Transcription

1 MODEL: PE770 DZ820E SB7900E NV770E Published: Jul.,2009 Revised: Nov.,2017

2 MODEL LIST Model Countries (Added Date) PE770 USA, ARG, PRY, BRA120V, BRA220V (Feb / 2011) PE770 AUS&NZL (Jul / 2012) DZ820E USA (Jul / 2013) SB7900E USA (Jul / 2014) NV770E RUS (Aug / 2014)

3 Country Code & Abbreviation of Country Name Meaning of "R" and "H"

4 CONTENTS (1) MAIN FRAME / COVER... 2 (2) UPPER SHAFT / NEEDLE BAR / PRESSER FOOT UNIT... 4 (3) FEED / THREAD CUTTING UNIT... 6 (4) LOWER SHAFT / BOBBIN WINDING MECHANISM... 8 (5) NEEDLE THREADING MECHANISM (6) ELECTRIC PARTS / POWER SUPPLY / MAIN MOTOR UNIT (7) EMBROIDERY UNIT (8) ACCESSORY PARTS / USER MANUAL / PACKAGE NEEDLE-PRESSER MODULE FEED MODULE THREAD CUTTER MODULE SPARE PARTS Note on parts: We keep performance parts for this sewing machine for at least 8 years after this model is discontinued. Performance parts are the necessary parts to maintain the function of the sewing machine

5 (1) MAIN FRAME / COVER

6 (1) MAIN FRAME / COVER No. CODE NAME R/H REMARKS No. CODE NAME R/H REMARKS 1 XD REAR COVER ASSY R XF PANEL PLATE PRINTED (DZ820E) SCREW, BIND M4X8 XG PANEL PLATE PRINTED (SB7900E) XD FACE PLATE R XG PANEL PLATE PRINTED (NV770E) X NT LOWER THREAD CUTTER H TAPTITE, BIND B M4X14 5 XC FACE PLATE CUTTER HOLDER 44 XC HANDLE ASSY 6 XC NEEDLE THREAD LEVER KNOB 45 XC HANDLE 7 XA NEEDLE THREAD LEVER SHAFT 46 XC HANDLE HOLDER 8 XC NEEDLE THREAD LEVER 47 XC HANDLE SHAFT THREAD THROUGH LEVER SPRING RETAINING RING, E4 10 XZ SHAFT PRESSER PLATE 49 XC BASE PLATE XE WASHER, PLAIN 50 XA BASE RUBBER A H TAPTITE, PAN B M3X6 51 XE ADJUSTING SCREW ASSY H 13 XC RUBBER WASHER 52 XC BASE PLATE COVER 14 X TAPTITE, BIND B M3X SCREW, BIND M3X5 15 XC SCREW PAN (S/P WASHER) M4X14 54 XE INLET ASSY US2 (USA) 16 XD FRONT COVER R XC INLET ASSY: F1D-EU (OTHER) 17 XC SS-BUTTON SCREW BIND M4X6 18 XC REVERSE BUTTON 56 XD LEAD WIRE ASSY MAIN BODY FCOMB 19 XD SV COVER 57 XD CONNECTOR HOLDER F-US XD PCB ASSY SS F-EM XD ES PIN F-A 21 XF LCD SUPPLY ASSY 2 R XD ES PIN F-B 22 XD BACK LIGHT PCB ASSY 60 XD SPRING, COMPRESSION 23 XD ASSY: TOUCH PANEL (PE770, NV770E) 61 XC FEED BAR SPACER XD ASSY:TOUCH PANEL (DZ820E) RETAINING RING E2 XD ASSY:TOUCH PANEL (SB7900E) SCREW PAN M4X6 24 XD BOARD PLATE 64 X TAPTITE, BIND S M4X10 25 XD BOARD PLATE UPPER 65 XD NEEDLE PLATE B ASSY SCREW BIND M3X5 66 XD NEEDLE PLATE B H 27 XD MAIN PCB HOLDER 67 XC SLIDE BUTTON 28 XE MAIN PCB SUPPLY ASSY-B R 68 XD CUTTER COVER 29 XA SPOOL PIN 69 XD NEEDLE PLATE COVER SPRING 30 XC SPOOL PIN HOLDER ASSY 70 X NT LOWER THREAD CUTTER H 31 XE PCB UNIT: LED LAMP-FR 71 XD NEEDLE PLATE COVER SUPPLY ASSY H 32 XC LAMP HOLDER SUPPORTER 72 XC SCREW, PAN (T WASHER) M3X6 33 X TAPTITE, PAN P M2.6X8 73 XC FREE ARM COVER 34 XC THREAD BOBBIN COVER 74 XC SCREW, PAN (S/P WASHER) M4X TAPTITE, BIND B M3X8 75 XC FREE ARM PLATE TAPTITE, CUP B M3X SCREW BIND M4X6 37 XC BOBBIN WINDER GUIDE ASSY 77 XD TOP COVER (PE770, NV770E) 38 XA SCREW XF TOP COVER (DZ820E) XZ SSVR INSULATION SHEET XF TOP COVER (SB7900E) XE CARD COVER 78 XF SCREW CAP XD INDICATION PLATE 79 XG SS PCB SUPPLY ASSY NEW F 42 XD PANEL PLATE (PE770) - 3 -

7 (2) UPPER SHAFT / NEEDLE BAR / PRESSER FOOT UNIT

8 (2) UPPER SHAFT / NEEDLE BAR / PRESSER FOOT UNIT No. CODE NAME R/H REMARKS UPPER SHAFT MECHANISM 1 XG UPPER SHAFT SUPPLY ASSY H XC PULLEY RETAINING RING, E6 4 XC UPPER SHAFT PULLEY 5 XC FIXED JOINT SET SCREW, SOCKET (FT) M5X BUSHING PRESSER 8 X TAPTITE, BIND S M4X10 9 XC T BELT 420-5GT-6 H XC TENSION PULLEY ASSEMBLY SCREW, PAN(S/P WASHER)M4X10 12 XD NP PCB ASSY FCOM 13 X TAPTITE, BIND B M3X10 14 XC PCB HOLDER SCREW, BIND M4X8 16 XC INSULATION SHEET SET SCREW, SOCKET (CP) M4X4 18 XD BELT GUARD 19 XC FELT CLIP NEEDLE BAR / PRESSER FOOT UNIT 21 XC SHAFT 22 XC PRESSER PLATE A 23 XG PRESSER PLATE B X TAPTITE, BIND S M4X10 25 XC ADJUSTING SCREW 26 XZ SCREW, PAN (WASHER) M3X18 27 XC PLATE SPRING SCREW, BIND M4X5 29 XE PCB UNIT: LED LAMP-FL 30 XZ TAPTITE, PAN B 4X RETAINING RING, E5-5 -

9 (3) FEED / THREAD CUTTING UNIT

10 No. CODE NAME R/H REMARKS FEED UNIT 1 XD INNER ROTARY HOOK ASSY R/H XD PILE H X BOBBIN 4 XC SCREW M4 5 XZ SHEET 6 XA WIRE CLIP SCREW BIND M4X6 THREAD CUTTING UNIT 8 XC PHOTO TRANSISTOR ASSY 9 XC SENSOR HOLDER 10 0A SCREW, PAN (S/P WASHER) M3 x SCREW BIND M4X SCREW BIND M3X5 (3) FEED / THREAD CUTTING UNIT - 7 -

11 (4) LOWER SHAFT / BOBIN WINDING MECHANISM

12 (4) LOWER SHAFT / BOBIN WINDING MECHANISM No. CODE NAME R/H REMARKS LOWER SHAFT MECHANISM 1 XC LOWER SHAFT A ASSY 2 XC LOWER SHAFT A 3 XC TIMING PULLEY D SET SCREW, SOCKET (CP) M5X5 5 X LOWER SHAFT BUSHING 6 X WASHER, THRUST RETAINING RING, E SET SCREW COLLAR SET SCREW, SOCKET (CP) M4X4 10 XC JOINT SET SCREW, SOCKET (FT) M5X5 12 XC JOINT SET SCREW, SOCKET (FT) M5X BUSHING PRESSER 15 X TAPTITE, BIND S M4X10 16 XC DISK 17 XC FELT BOBBIN WINDING MECHANISM 18 XC BOBBIN WINDER ASSEMBLY HOLDER 19 XC BW SHAFT HOLDER ASSEMBLY 20 X RUBBER RING 21 XZ BOBBIN WINDER SHAFT SPRING RETAINING RING, E5 23 XA BOBBIN WINDER SHAFT STOPPER 24 X BOBBIN WINDER SPRING 25 XC SW ADJUST PLATE SCREW, BIND M3X6 27 XC SW ASSY: BW-F 28 XC BOBBIN BASE ASSY H 29 XC BOBBIN BASE XA BOBBIN THREAD CUTTER HOLDER 31 X NT LOWER THREAD CUTTER H 32 XA SCREW 33 XC BOBBIN WINDER COVER NUT 2 M3 35 0A SCREW PAN (S/P WASHER) M3X25 36 XC BOBBIN PRESSER 37 XC BW HOLDER SUPPORTER 38 X TAPTITE, BIND S M4X SCREW, BIND M4X8-9 -

13 (5) NEEDLE THREADING MECHANISM

14 (5) NEEDLE THREADING MECHANISM No. CODE NAME R/H REMARKS No. CODE NAME R/H REMARKS 1 XC THREAD GUARD ASSEMBLY 45 XC MOTOR, PULSE: AT SMJ D 2 XA TENSION DISC A H 46 XC INITIAL ADJUSTING PLATE 3 XC TENSION DISC B H 47 XC RUBBER 4 XC TENSION ADJUSTING SCREW 48 X BAND 5 XA TENSION DISC WASHER 49 XE SPOOL PRESSER C 6 XC TENSION RELEASE PLATE ASSY 50 XA SPRING 7 XA THREAD TENSIONSPRING TAPTITE, BIND B M4X10 8 XD WASHER 52 XD THREAD GUARD COVER H 9 XA TENSION PLATE ASSY 53 XD FRONT THREAD GUARD COVER 10 XZ THREAD TENSIONCAM SCREW, BIND M3X RETAINING RING, E3 55 XC SCREW, PAN (S/P WASHER) M3X6 12 XZ THREAD TENSION GEAR COVER 56 XD THREAD GUIDE COVER X SPRING 57 XC THREAD GUIDE 14 XA SPRING TAPE 58 X TAPTITE, BIND B M3X10 15 XC TENSION RELEASE HOLDER ASSY 16 XA TENSION RELEASERLINK RETAINING RING, E3 18 XC TENSION PRESSURE ASSY 19 XA TENSION PLATE 20 XA SPACER 21 XA SPRING 22 XC TENSION RELEASE CAM SET SCREW, SOCKET (FT) M3X4 24 X POWER LOCK 2X3 25 X SPRING RETAINING RING, E2 27 XC PLATE ASSEMBLY 28 XC THREAD GUIDE SHUTTER 29 XC THREAD GUIDE 30 XC THREAD TAKE UP SPRING H 31 XE THREAD CUTTING SHUTTER H 32 XD THREAD CATCHING SPRING CASE FE H 33 XD THREAD SENSOR HOLDER FE 34 XD UPTHREAD PCB ASSY FCOM 35 0A SCREW PAN (S/P WASHER) M3X20 36 XC THREAD GUIDE SHUTTER LINK RETAINING RING, E3 38 XC SPRING 39 XD THREAD GUIDE WIRE FE H 40 XA WASHER, PLAIN 41 XC SCREW, PAN (S/P WASHER) M3X SCREW, BIND M3X4 43 XC PRESSER SWITCH HOLDER 44 XC SW ASSY: PF-F

15 (6) ELECTRIC PARTS / POWER SUPPLY / MAIN MOTOR UNIT

16 (6) ELECTRIC PARTS / POWER SUPPLY / MAIN MOTOR UNIT No. CODE NAME R/H REMARKS ELECTRONIC PARTS 1 XD MOTOR PCB SUPPLY ASSY R 2 XD LEAD WIRE ASSY POWER 3 XD FFC: UL2896SFBNCD-P0.5-L TAPTITE, BIND B M3X SCREW, BIND M4X8 6 XA WIRE CLIP 7 X TAPTITE, BIND S M4X10 8 X BAND MAIN MOTOR UNIT 9 XC T BELT494-2GT-6 H 10 XG ASSY: MAIN MOTOR-F H XC MOTOR HOLDER 12 XA FENDER RUBBER 13 XA MOTOR SPACER PRESSER 14 XC SPACER 4X6 15 XC SCREW, PAN (S/P WASHER) M4X14 16 XA UPSET 4X12 DB 17 XA MOTOR FAN H POWER SUPPLY UNIT 18 XE POWER SUPPLY UNIT F120EM (120V) R XE POWER SUPPLY UNIT F230EM (230V) R TAPTITE, BIND B M3X8 20 XC SCREW, PAN (S/P WASHER) M4X14 21 XC POWER SUPPLY CORD: UL CSA-LF H (USA) XD POWER SUPPLY CORD: IRAM (ARG) H XF POWER SUPPLY CORD: BRZ H (BRA: 120V) XE POWER SUPPLY CORD: BRZ 220V H (BRA: 220V) XC POWER SUPPLY CORD:SAA-LF H (AUS&NZL) XA POWER SUPPLY CORD (OTHER) H

17 (7) EMBROIDERY UNIT

18 (7) EMBROIDERY UNIT No. CODE NAME R/H REMARKS No. CODE NAME R/H REMARKS 1 XD MAIN FRAME SUB ASSY 45 XD X INITIAL SHUTTER 2 XD X DRIVING GEAR PULLEY SCREW BIND M4X6 3 XE WASHER SPRING 47 XA X BELT PRESSER RETAINING RING E4 48 XC SCREW, PAN (S/P WASHER) M4X12 5 XD X PULSE MOTOR SMJ B WASHER EX TOOTH 4 6 XA SCREW 50 XD X SLIDER 7 XA TIMING BELT 60S2M494 H XC SCREW, PAN (S/P WASHER) M4X8 8 XD X TENSION PULLEY ASSY 52 XD Y GUIDE SHAFT PRESSER PLATE 9 XA TENSION PULLEY 53 XD Y GUIDE SHAFT PRESSER RETAINING RING E4 54 XD ES BASE COVER R 11 XC SCREW, PAN (S/P WASHER) M4X8 55 XD GROOVE COVER 12 XD OIL GUARD PLATE 56 X RUBBER CUSHION SCREW BIND M3X4 57 XC RUBBER CUSHION COVER 14 XD EMB RELAY PCB ASSY 58 XD LOCK FINGER 15 XA X GUIDE SHAFT 59 XC SPRING 16 XD X CARRIAGE ASSY 60 XD LOCK RELEASE LEVER 17 XD Y DRIVING GEAR PULLEY 61 XD LEAD WIRE ASSY EMB UNIT FCOMB 18 XD IDLE GEAR TAPTITE BIND P M3X16 19 XE WASHER SPRING TAPTITE CUP B M4X WASHER PLAIN M 6 64 XC SCREW, PAN (S/P WASHER) M4X RETAINING RING E4 65 XD ES MAIN COVER ASSY R RETAINING RING E3 66 XD ES MAIN COVER 23 XD Y PULSE MOTOR SMJ F 67 XD GROOVE COVER 24 XE LEAD WIRE SUPPLY ASSY: SLEEVE 68 XD X CARRIAGE COVER R 25 XA SCREW 69 XD YPM COVER SCREW BIND M3X TAPTITE BIND P M3X10 27 XD Y TENSION PULLEY ASSY 71 XE EF EMBROIDERY FRAME LARG XA TENSION PULLEY NUT 1 M WASHER PLAIN M 6 73 XE THUMB SCREW RETAINING RING E4 74 XG WASHER XC TIMING BELT 40S2M530 H 75 XA NUT 32 XC SCREW, PAN (S/P WASHER) M4X SCREW FLAT M3X6 33 XD Y CARRIAGE ASSY 34 XD Y CARRIAGE PLATE SUB ASSY X BAG 400X500H 35 XD HOOP FIXED SPRING XC BAG 240X330H 36 XD Y INITIAL SHUTTER 77 XE EMBROIDERY PACKING ASSY SCREW BIND M3X4 38 XA Y SLIDER 39 XA SCREW, PAN (S/P WASHER) M3X7 40 XA Y GUIDE SHAFT WASHER, WAVE SPRING RETAINING RING E4 43 XE CODE GUIDE ASSY SCREW BIND M3X4-15 -

19 (8) ACCESSORY PARTS / USER MANUAL / PACKAGE (for ACCESSORY) (INSTRUCTION BOOK) (WARRANTY CARD) (QUICK REFERENCE GUIDE) (for PRINTED MATTER) (USB GUIDE) (INSERTION: INNER ROTARY HOOK) (INSERTION BRO) (DUST COVER ASSY) (INSERTION) (BR SAFE INSERTION) (REGISTRATION SHEET) (WARRANTY CARD) (ACCINFO SHEET)

20 (8) ACCESSORY PARTS / USER MANUAL / PACKAGE No. CODE NAME R/H REMARKS No. CODE NAME R/H REMARKS ACCESSORY PARTS 27 XF BR SAFE INSERTION (BRA) XC ACCESSORY BAG 28 XE REGISTRATION SHEET (USA) XZ SEAM RIPPER 29 XF &5 WARRANTY FOR US (USA) X NEEDLE SET 30 XC ACCINFO SHEET (DZ820E) X BOBBIN 31 XG IBROIDERY INSERTION 3 D X CLEANING BRUSH PACKAGE SPOOL PRESSER A 32 XD STYROFORM TOP R SPOOL PRESSER B 33 XD STYROFORM BOTTOM R 8 XA NET 34 X BAG 630X630T 9 X SCREW DRIVER S 35 XF MASTER CARTON MODEL:PE-770 R XC SCREW DRIVER (AUS&NZL) 11 XC SCISSORS XF CARTON ASSY MODEL:DZ820E R XA BAG, 150X200 (DZ820E) 13 XA EF EMBROIDERY FRAME M XG CARTON ASSY MODEL:SB7900E R (US, ARG, BRA, PRY) (SB7900E) 14 XE EF EMBROIDERY FRAME LARG XG MASTER CARTON MODEL:NV770E R XD EMBROIDERY SHEET M ASSY F (NV770E) (US, ARG, BRA, PRY) XE MASTER CARTON MODEL: PE-770 R 16 XD EMBROIDERY SHEET L ASSY F (OTHER) 17 XF EMBROIDERY CD (DZ820E) XF IBROIDERY STICKER USER MANUAL / OTHER PARTS XG ADDRESS LABEL BR BIZH XD INSTRUCTION BOOK ENG (English) R XG WARRANTY LABEL BR 90DAYS XD INSTRUCTION BOOK SPA (Spanish) R XE INSTRUCTION BOOK BR R (Portuguese) XE INSTRUCTION BOOK RUS (Russian) R XF PREMIUM WARRANTY FOR US (USA) XF WARRANTY SHEET FOR SIMPLICITY (USA) XG WARRANTY CARD BRO BR HEM (BRA) XD QUICK REFERENCE GUIDE R BAG, 230X310H 22 XE USB GUIDE BR (BRA) XE USB GUIDE (OTHER) 23 XE INSERTION (for INNER ROTARY HOOK & INNER ROTARY HOOK BRACKET: USA) XE INSERTION (for INNER ROTARY HOOK & INNER ROTARY HOOK BRACKET: OTHER) 24 XE INSERTION BRO 25 XZ DUST COVER ASSY 26 XE INSERTION XF INSERTION FOR AC POWER (USA) XE UKRAINIAN ROHS INSERTION (RUS)

21 NEEDLE-PRESSER MODULE

22 NEEDLE-PRESSER MODULE No. CODE NAME R/H REMARKS No. CODE NAME R/H REMARKS 1 XE UPPER UNIT HOLDER 45 XF THREAD TAKE-UP LEVER ASSY XC SHAFT BUSHING ASSEMBLY 46 XC THREAD TAKE-UP LEVER LINK 3 0A SCREW, PAN (S/P WASHER) M4X14 47 XC PRESSER BAR 4 XC SHAFT BUSHING A 48 XC PRESSER BAR CLAMP ASSY 5 XC PRESSER BAR BUSHING SET SCREW, SOCKET (CP) M5X TAPTITE, BIND B M3X8 50 XC SPRING 7 XC PLATE SPRING 51 XC PRESSER SPRING SUPPORTER 8 XC THREAD TAKE-UP COUNTER WEIGHT 52 XG SCREW SM X8 H SET SCREW, SOCKET (FT) M5X5 53 XD EMBROIDERY PRESSER ASSEMBLY 10 XC UNIT SHAFT 54 XC PRESSER FOOT LIFTER H WASHER 55 XC PRESSER LIFT SHAFT RETAINING RING, E6 56 XA WASHER 13 XC NEEDLE BAR SUPPORTER ASSY H RETAINING RING, E4 14 XC HOOK RELEASE PLATE 58 XC LEVER GUIDE SHAFT SCREW, BIND M2.6X5 59 XC LEVER A ASSY 16 XZ GUARD PLATE XC LEVER B 17 XD THREADER HOOK ASSY H XC CAP 18 XD LINK A ASSY 62 XC TORSION SPRING 19 XD LINK B RETAINING RING, E3 20 XC THREAD GUIDE ASSY 64 XC SPRING 21 XC SPRING 65 XC LEVER PRESSER PLATE 22 XC SHAFT TAPTITE, PAN B M3X SCREW, BIND M2X4 67 XC THREAD RELEASER ASSY 24 XC SHAFT 68 XC ADJUSTING PLATE ASSY 25 XC PLATE 69 XC TENSION RELEASER C SCREW, BIND M3X RETAINING RING, E3 27 XF NEEDLE BAR XC GIZA TITE 4X12 28 XE N/B THREAD GUIDE SUPPLY ASSY XC SCREW3X10 29 X SCREW SM RETAINING RING, E2 30 XC NEEDLE THREAD PLATE 74 XC THREAD GUIDE PLATE 31 XC NEEDLE BLOCK XD UPPER UNIT SUPPORT PLATE 32 XZ NEEDLE CLAMP SCREW H 76 X WASHER SET SCREW, SOCKET (FT) M4X RETAINING RING, E X LOCK NUT 78 XF THREAD TAKE-UP LEVER PLATE XC SPRING 79 XA SCREW XF NEEDLE BAR CRANK R SUPPLY ASSY H SCREW, FLAT SM X7 L 80 XD NEEDLE SUPPLY UNIT ASSY U SET SCREW, SOCKET (FT) M5X5 39 XC NEEDLE THREAD BLOCK SET SCREW, SOCKET (FT) M4X4 41 XD NEEDLE HOLDER GUIDE ASSY 42 XC SHAFT SET SCREW, SOCKET (CP) M3X5 44 XC SPRING

23 FEED MODULE

24 No. CODE NAME R/H REMARKS 1 XC BASE PLATE 2 XC BUSHING SUPPORTER B SCREW, BIND M4X6 4 XC BUSHING PRESSER B SCREW, BIND M3X5 6 XF OUTER ROTARY HOOK ASSY H XD OUTER ROTARY HOOK SHAFT SPACER WASHER SET SCREW, SOCKET (CP) M4X6 11 XC INNER ROTARY HOOK BRACKET ASSY H XE SPRING PLATE XC SPRING ASSIST PLATE XC PHOTO DIODE HOLDER ASSY 15 XC CORD HOLDER SCREW BIND M2.6X SCREW BIND M2X4 18 XC STOPPER PLATE BLOCK ASSY SCREW, BIND M4X SCREW, BIND M3X8 21 XD LOWER SHAFT B ASSY 22 X LOWER SHAFT BUSHING 23 X WASHER, THRUST RETAINING RING, E SET SCREW COLLAR SET SCREW, SOCKET (CP) M4X4 27 XC BUSHING SUPPORTER A 28 XC BUSHING PRESSER A SCREW, BIND M4X16 30 XD NEEDLE PLATE A 31 XF STOPPER PLATE XD F GEAR STOPPER PLATE SCREW, BIND M2.6X3 34 XE NEEDLE PLATE B SUPPORT PLATE 35 X SCREW M4 H 36 XD NEEDLE PLATE A ASSY H FEED MODULE 37 XD FEED SUPPLY UNIT ASSY U

25 THREAD CUTTER MODULE

26 No. CODE NAME R/H REMARKS 1 XC THREAD CUTTER FRAME ASSY 2 XC SPACER 3 XG CUTTER BLADE ASSY H XE PRESSER PLATE ASSY H SCREW, BIND M3X5 6 XC SPRING PLATE H 7 XC RUBBER RETAINING RING, E3 9 XC THREAD HOOK ASSY POLYESTER SLIDER 11 X WASHER RETAINING RING, E4 13 XC CUTTER HOLDER 14 XC THREAD CUTTER LEVER 15 XC THREAD CUTTER LEVER GEAR 16 0A SCREW, PAN (S/P WASHER) M3X6 17 XC MOTOR HOLDER ASSY 18 XC IDLE GEAR A 19 XC IDLE GEAR B 20 X SPRING RETAINING RING, E2 22 XF C PULSE MOTOR SMJ BP SCREW, BIND M3X4 24 XC COLLAR SCREW, BIND M4X20 26 X BAND POLYESTER SLIDER 28 XC WAVE-SHAPE SPRING WASHER THREAD CUTTER MODULE 29 XD THREAD CUTTER SUPPLY ASSY

27 SPARE PARTS

28 No. CODE NAME R/H REMARKS DRIVER 1 XE BOX SCREW DRIVER 6 GAUGE 2 XA TENSION GAUGE 10 XA TENSION GAUGE 30 XA TENSION GAUGE 50 XC TENSION GAUGE XC PUSH PULL GAUGE 4 XC FEED GAUGE 5 XC MOLYKOTE EM30L GREASE, OIL 6 XC EPNOC AP (N) 0 7 XC MOLYKOTE M DISPERSION * (EXCEPT USA) 8 XC FBK OIL RO XZ OILER SPARE PARTS * USA must purchase in the US. (It s not listed on the TSCA)

29 08G09HF885U41