CONTENTS (1) PRINCIPAL PARTS... 2 (2) UPPER SHAFT AND NEEDLE BAR... 4 (3) FEED MECHANISM... 6 (4) ROTARY HOOK AND THREAD GUIDE...
|
|
|
- Gertrude Hodges
- 5 years ago
- Views:
Transcription
1
2 CONTENTS (1) PRINCIPAL PARTS... 2 (2) UPPER SHAFT AND NEEDLE BAR... 4 (3) FEED MECHANISM... 6 (4) ROTARY HOOK AND THREAD GUIDE... 8 (5) LAMP, MAIN PC BOARD ASSEMBLY AND MOTOR UNIT (6) ACCESSORY
3 (1) PRINCIPAL PARTS No. CODE NAME REMARKS No. CODE NAME REMARKS 1 XA Rear cover for PC XA Contrast key XA Rear cover for Super ACE II 43 XA Circuit board presser 2 X Spool pin 44 X Taptite, Bind B M XA Spool pin shaft XA S key top 4 XA Bobbin presser 46 XA SV connecting block Screw, Pan M XA VR PC board ASSY Nut, 1 M Taptite, Bind B M3 8 7 XA Thread guide assist plate 49 XA SS button for PC Taptite, Pan B M3 6 XA SS button for Super ACE II 9 XA Front cover for PC XA Reverse sewing button XA Front cover for Super ACE II 51 XA NP button 10 U Screw, Pan (T washer) M XA SS PC board ASSY Taptite, Cup B M XA Insulation sheet 12 XA Carrying handle Taptite, Bind B M XA Carrying handle shaft Taptite, Cup B M Retaining ring, E4 56 XA Belt cover 15 XA Handle holder Screw, Bind M X Taptite, Bind S M X Screw cover 17 XA Face plate 59 XA Accessory table ASSY 18 X Face plate bush Accessory table notched spring 19 X NT thread cutter ASSY 61 X Sponge 20 XA Retaining ring, CSTW-8 62 XA Set plate D 21 XA Needle thread lever knob 63 X Taptite, Bind S M XA Needle thread lever 64 XA Case ASSY 23 X Needle thread lever shaft Case felt Spring, Extension 66 XZ Case felt Washer 67 XA Decoration plate 26 XA Shaft presser plate 68 XA Dial cover 27 XA Washer 69 U Screw, Pan (T washer) M Taptite, Pan B M Screw, Bind M XA Free arm cover Screw, Pan (S/P Washer) M XA Base plate 33 X Taptite, Bind S M XA Rubber cushion A 35 XA Base cover Screw, Bind M XA Panel key board for PC-3000 XA Panel key board for Super ACE II 38 XA LCD PC board ASSY Screw, Pan (S/P washer) M XA LCD plate holder R 41 XA LCD plate holder L - 2 -
4 - 3 -
5 (2) UPPER SHAFT AND NEEDLE BAR No. CODE NAME REMARKS No. CODE NAME REMARKS 1 XA Upper shaft ASSY Metal plate 2 X Pulley 46 XA Needle bar crank 3 X Presser plate A Screw, Flat SM3.57L 4 X Taptite, Bind S M XA Thread take-up lever ASSY 5 X Timing belt 176 L XA Thread take-up lever plate 6 XA Tension pulley ASSY 50 XA Screw, Truss M A Screw, Pan (S/P Washer) M XA Thread take-up lever stud 8 XA NP PC board ASSY Retaining ring E5 9 0A Screw, Pan (S/P Washer) M XA Washer, Wave spring 10 XA Needle bar supporter ASSY 54 XA Taptite, Cup S M XA Needle threader shaft ASSY 55 XA Presser bar Spring, Compression 56 XA Presser foot lifter 13 XA Needle threader slider 57 XA Stud for presser foot lifter 14 XA Needle bar supporter stud A 58 X Set screw, Pan M X Needle bar supporter stud C 59 XA Presser bar clamp CHG Set screw, Socket (CP) M Spring 17 XA Set plate 61 XA Washer, plain Screw, Bind M XA Spacer 19 X Spring, Extension 63 XA Tapitite, Cup S M X Needle threader position setter 64 XA Tension releaser C Set screw, Socket (FT) M Retaining ring CS4 22 XA Needle bar ASSY 66 XA Spring 23 XZ Screw Zigzag presser foot 24 XA Needle bar thread guide 68 XA Screw 25 XA Screw, Truss M Presser holder ASSY Needle HA XA BH switch plate ASSY 27 XA Threader hook ASSY Screw, Bind M Set screw, Socket (CP) M XA ZPM holder ASSY 29 X Nut 73 Z BP483523LM26ZPM 30 XA Spring, Extension 74 XA ZPM lead wire ASSY 31 XA Needle bar supporter stud holder Screw, Bind M X Needle bar supporter stud 76 XA Zigzag cam 33 X Needle bar supporter arm Retaining ring E3 34 XA Taptite, Cup S M XA Zigzag lever 35 X Nut 79 X Thrust washer 36 XA Washer CHG Retaining ring E Screw, Pan M X Taptite, Bind S M XA Spring, Extension 82 XA Needle clamp pin 39 XA Needle plate ASSY 40 X NT thread cutter ASSY 41 X Needle plate cover 42 X Screw 43 X Needle bar crank rod ASSY Set screw, Socket (CP) SM
6 - 5 -
7 (3) FEED MECHANISM No. CODE NAME REMARKS No. CODE NAME REMARKS 1 XA Feed rod ASSY 45 XA Taptite, Cup S M XA Feed rod supporting plate 46 XA Feed regulator slide block 3 XA Spring, Extension F 47 X Taptite, Bind S M XA Spring, Extension S 48 XA SPM holder 5 XA Horizontal feed shaft CHG 49 XA Horizontal feed shaft fixed plate 6 XA Horizontal feed arm ASSY Screw, Bind M Set screw, Socket (CP) M X Taptite, Bind S M Retaining ring E6 52 XA Spring, Plate 9 X Washer, Wave spring Retaining ring E5 11 XA Horizontal feed plate Screw, Bind M XA Feed stand 14 X Screw Set screw, Socket (FT) M XA Feed dog Screw, Bind M XA Feed bar shaft Retaining ring E Set screw, Socket (CT) M X Horizontal feed shaft bushing Bushing presser 23 X Taptite, Bind S M XA Spring, Extension 25 XA Horizontal-feed shaft supporter Screw, Pan (S/P Washer) M XA Drop plate 28 XA Drop knob 29 XA Spring, Compression Washer 31 XA Spring, Plate 32 XA FPM holder A 33 XA FPM holder B 34 Z BP483523LM28FPM 35 XA FPM lead wire ASSY Screw, Bind M A Screw, Pan (S/P Washer) M XZ Feed regulator ASSY 39 XA F gear 40 XA Spring, Extension 41 X Washer Retaining ring E5 43 X Washer, Wave spring 44 XA Rubber - 6 -
8 - 7 -
9 (4) ROTARY HOOK AND THREAD GUIDE No. CODE NAME REMARKS 1 XA Lower thread guide ASSY 2 XA Lower thread guide arm ASSY Screw, Bind M4 8 4 X Spool cap (Medium) 5 XA Lower shaft ASSY Bushing presser R 7 XA Bushing presser L 8 X Taptite, Bind S M XA Outer rotaty hook ASSY 10 XA Inner rotaty hook bracket ASSY Screw, Bind M XA Inner rotaty hook ASSY 13 XA Outer rotary hook shaft 14 XA Washer U 15 XA Washer 16 XA Washer Set screw, Socket (CP) M XA Bobbin winder ASSY 19 XA Bobbin base ASSY 20 XA Spring, Compression 21 XA Bobbin winder switch ASSY Screw, Pan M X Taptite, Bind SM XA Thread guard ASSY 25 X Tension dial shaft 26 X Tension dial 27 XA Thread guard cover ASSY 28 XA Spring Screw, Pan (S/P Washer) M X Taptite, Bind S M XA Thread guard holder ASSY 32 XA Thread guard plate 33 XA Thread tension ASSY Screw, Bind M Screw, Bind M X PF Switch ASSY Screw, Pan M XA Bobbin winder thread guide ASSY Screw, Bind M XA Thread guide plate Screw, Bind M
10 - 9 -
11 (5) LAMP, MAIN PC BOARD ASSEMBLY AND MOTOR UNIT No. CODE NAME REMARKS 1 XA WB sew-light bulb 2 XA WBL socket ASSY Screw, Pan M XA Lamp holder Screw, Bind M3 4 6 XA Main PC board ASSY Screw, Pan (S/P Washer) M Coating clip CS-1 9 X Band 10 XA Timing belt B173 XXL Screw, Pan (S/P Washer) M XA MM motor unit for 120V XA MM motor unit for 230V 13 X Power supply unit ASSY for 120V X Power supply unit ASSY for 230V 14 XA G fuse 3.15AA for 120V XA G fuse 2AB for 230V 15 XA G fuse 3.15AB for 120V XA G fuse 5AB for 230V 16 X Pin jack ASSY for 120V X Pin jack ASSY for 230V 17 XA Screw, Pan (S/P Washer) M XA Inlet ASSY for 120V XA Inlet ASSY for 230V Screw, Bind M XA Power supply cord for UL, CSA XA Power supply cord for Europe X Power supply cord for Australia X Power supply cord for UK XA Power supply cord for CHN 21 XA Foot controller
12 - 11 -
13 (6) ACCESSORY No. CODE NAME REMARKS No. CODE NAME REMARKS 1 X Overcasting foot "G" 37 XA Panel keyboard seal (for Canada) 2 X Zipper foot "I" 3 X Blind stitch foot "R" 4 X Buttonhole foot "A" Monogramming foot "N" 6 X Seam ripper Button fitting foot "M" 8 X Needle set 9 X Cleaning brush Eyelet punch 11 XA Disc-shaped screwdriver 12 X Screwdriver (Large) 13 X Screwdriver (Small) Spool cap (Large) Spool cap (Small) 16 XA Extra spool pin 17 X Twin needle set 18 XA Net 19 XA Accessory bag 20 X Side cutter 21 X Walking foot 22 XA Finger guard 23 XA Bag, H 24 X Spool felt 25 X Stitch guide foot "P" 26 XA Quilting foot Instruction manual (English) Instruction manual (French) Instruction manual (Dutch) Instruction manual (German) Instruction manual (Spanish) Instruction manual (Italian) 28 XA Pattern sticker ASSY 29 X Carton for PC-3000 X Carton for PC-3000 (for New Zealand) X Carton for Europe 30 X Pad 31 X SF ASSY 32 X Bag, Bag, X Carton, Accessory 35 XA Bobbin (10 set), UPC XA Bobbin (10 set), EAN 36 XA Pattern sheet ASSY
14 - 13 -
15 PC-3000 SUPER ACE II T
PARTS CATALOGUE FOR B373 (STAR 110, PS-2200) B375 (STAR 120E, PS-2300) B376 (STAR 130E) B377 (STAR 140E, PS-2500)
PARTS CATALOGUE FOR B373 (STAR 110, PS-2200) B375 (STAR 120E, PS-2300) B376 (STAR 130E) B377 (STAR 140E, PS-2500) 5.1998. CONTENTS (1) PRINCIPAL PARTS... 2 (2) UPPER SHAFT AND NEEDLE BAR... 4 (3) FEED
PARTS CATALOGUE FOR COMPUTERIZED SEWING MACHINE
PARTS CATALOGUE FOR COMPUTERIZED SEWING MACHINE PC-8500 SUPER GALAXIE 2100 1. 1999. CONTENTS (1) PRINCIPAL PARTS... 2 (2) UPPER SHAFT AND NEEDLE BAR... 4 (3) FEED MECHANISM... 8 (4) ROTARY HOOK, THREAD
CONTENTS (1) PRINCIPAL PARTS... 2 (2) UPPER SHAFT AND NEEDLE BAR... 4 (3) FEED MECHANISM... 8 (4) ROTARY HOOK, THREAD GUIDE AND THREAD CUTTING...
7. 2001. CONTENTS (1) PRINCIPAL PARTS... 2 (2) UPPER SHAFT AND NEEDLE BAR... 4 (3) FEED MECHANISM... 8 (4) ROTARY HOOK, THREAD GUIDE AND THREAD CUTTING...10 (5) LAMP, MAIN PC BOARD ASSEMBLY AND MOTOR UNIT..12
CONTENTS (1) PRINCIPAL PARTS... 2 (2) UPPER SHAFT AND NEEDLE BAR... 4 (3) FEED MECHANISM AND SHUTTLE HOOK... 6
4. 2001. CONTENTS (1) PRINCIPAL PARTS... 2 (2) UPPER SHAFT AND NEEDLE BAR... 4 (3) FEED MECHANISM AND SHUTTLE HOOK... 6 (4) ZIGZAG, BH MECHANISM AND PATTERN SELECTION...8 (5) UPPER TENSION, LAMP AND MOTOR
Home Sewing Machine PARTS REFERENCE LIST. MODEL: NC21-S2, S3 Model CS8000 Series CS8100 Series
Home Sewing Machine PARTS REFERENCE LIST MODEL: NC21-S2, S3 Model CS8000 Series CS8100 Series CONTENTS (1) PRINCIPAL PARTS... 2 (2) UPPER SHAFT / NEEDLE BAR, PRESSER MECHANISM... 6 (3) FEED, ROTARY HOOK
MODEL: CS6000 CS6000i BC2500 RS260
MODEL: CS6000 CS6000i BC2500 RS260 Published: Sep.,2005 Revised: Mar.,2012 MODEL LIST Model Countries (Added Date) CS6000 CAN (Jan / 2011) CS6000i USA, ARG, PRY, BRA, BRA220V (Jan / 2011) BC2500 DEU&AUT,
MODEL: NV900D Published: Jan.,2008 Revised: Jan.,2017
MODEL: NV900D Published: Jan.,2008 Revised: Jan.,2017 MODEL LIST Model Countries (Added Date) NV900D USA, CAN, CHL, BRA120V, BRA220V (Feb / 2011) Country Code & Abbreviation of Country Name Meaning of
PARTS CATALOGUE FOR XL 5340 XL 5030 XL 5031 XL 5232 XL 5020 XL 5021 XL 5130 XL 5010 XL 5011 PX 300 PX 200 PX 100
PARTS CATALOGUE FOR XL 5340 XL 5030 XL 5031 XL 5232 XL 5020 XL 5021 XL 5130 XL 5010 XL 5011 PX 300 PX 200 PX 100 7.1999. CONTENTS (1) PRINCIPAL PARTS (XL Series)... 2 PRINCIPAL PARTS (PX Series)... 4 (2)
MODEL: ES2000/ES2000T/ES2010/ES2020 CE4000/CE5000 CS770 XR6600 COMFORT40E JS50E
MODEL: ES2000/ES2000T/ES2010/ES2020 CE4000/CE5000 CS770 XR6600 COMFORT40E JS50E Published: Sep.,2005 Revised: Mar.,2017 MODEL LIST Model Countries (Added Date) ES2000 USA, CHL, GUF, BEL&FRA&NLD, KOR (Jan
PARTS CATALOGUE FOR PS3100 STAR230EQC PS57 CAMPUS200 XRX
PARTS CATALOGUE FOR PS2250 PS2360 PS2470 PS3100 PS53 PS55 PS57 RSR55 XRX55 STAR35 STAR45 STAR50 STAR230E STAR230EQC STAR240E CAMPUS200 BOUTIQUE37 5. 2005. 7. 2001. CONTENTS (1) PRINCIPAL PARTS... 2 (2)
PARTS REFERENCE LIST MODEL: NS80/NV50/ML900/NS50
Home Sewing Machine PARTS REFERENCE LIST MODEL: NS80/NV50/ML900/NS50 CONTENTS (1) PRINCIPAL PARTS... 2 (2) UPPER SHAFT / NEEDLE BAR, PRESSER MECHANISM... 4 (3) FEED / FEED ADJUSTMENT MECHANISM... 6 (4)
MODEL: NQ1300PRW NQ1300
MODEL: NQ1300PRW NQ1300 Published: Oct.,2014 Revised: Feb.,2018 MODEL LIST Model Countries (Added Date) NQ1300PRW USA (Oct / 2014) NQ1300 CAN, ARG, CHL, PRY, BRA (Oct / 2014) Country Code & Abbreviation
MODEL: NV4000D Published: Aug.,2005 Revised: Feb.,2017
MODEL: NV4000D Published: Aug.,2005 Revised: Feb.,2017 MODEL LIST Model Countries (Added Date) NV4000D CHL, BRA, TWN (Feb / 2011) Country Code & Abbreviation of Country Name Meaning of "R" and "H" CONTENTS
PARTS LIST MODEL: Sakura95
First Edition: November 0 MODEL: Sakura MODEL: Sakura 0 0 MODEL: Sakura KEY PARTS NO. NO. DESCRIPTION 0 0 00B0 000 0000 000 000 000000 000 00000 0000 0000 000 00 0000 00000 0000 0 00A0 0000 000 00 0A 00
PARTS REFERENCE LIST MODEL: NX450/NX450Q/NV400/NV400SE NV350SE/NV450/NV500/NV410
Home Sewing Machine PARTS REFERENCE LIST MODEL: NX450/NX450Q/NV400/NV400SE NV0SE/NV450/NV500/NV410 Published: Jul.,2006 Revised: Feb.,2013 MODEL LIST Model Countries (Added Date) NX450Q CAN (May / 2011)
PARTS REFERENCE LIST MODEL: NX450/NX450Q/NV400/NV400SE NV350SE/NV450/NV500/NV410 NX570Q
Home Sewing Machine PARTS REFERENCE LIST MODEL: NX450/NX450Q/NV400/NV400SE NV0SE/NV450/NV500/NV410 NX570Q Published: Jul.,2006 Revised: Nov.,2017 MODEL LIST Model Countries (Added Date) NX450Q CAN (May
MODEL: NV5000 Published: Jul.,2011 Revised: Mar.,2016
MODEL: NV5000 Published: Jul.,2011 Revised: Mar.,2016 MODEL LIST Model Countries (Added Date) NV5000 USA, CAN, DEU&ITA&CHE, UK, BEL&FRA&NLD, ESP, EEU&NEU (Jul 2011) NV5000 RUS (Sep 2011) Country Code &
MODEL: BP2100 V3. Published: Oct.,2012 Revised: -
MODEL: BP2100 V3 Published: Oct.,2012 Revised: - MODEL LIST Model Countries (Added Date) BP2100 USA&MEX, ARG, CHL&PER, PRY, BRA (Oct / 2012) V3 DEU&ITA&CHE, UK&IRE, BEL&FRA&NLD, ESP, EEU&NEU (Oct / 2012)
ELNA 7200 PARTS LIST
ELNA 7200 PARTS LIST 02/2005 Printed in Switzerland 395903-40 0 1 NO. PART NO. DESCRIPTION 1 395755-50 FRONT COVER (UNIT) 2 395755-51 FRONT COVER 3 395755-64 KEYBOARD PANEL 4 395754-73 LCD WINDOW 5 395755-55
MODEL: PE430 PE500 NV90E HE1 PE525
MODEL: PE430 PE500 NV90E HE1 PE525 Published: Oct.,2008 Revised: Mar.,2017 MODEL LIST Model Countries (Added Date) NV90E IND (May / 2011) HE1 USA (Jul / 2011) PE500 USA (Nov / 2011) NV90E UK&IRE (May /
MODEL: PE770 DZ820E SB7900E NV770E
MODEL: PE770 DZ820E SB7900E NV770E Published: Jul.,2009 Revised: Nov.,2017 MODEL LIST Model Countries (Added Date) PE770 USA, ARG, PRY, BRA120V, BRA220V (Feb / 2011) PE770 AUS&NZL (Jul / 2012) DZ820E USA
Liste de pièces Lista de Piezas Parts List
3210 3223 3229 Liste de pièces Lista de Piezas Parts List 104 23 94-96 6 Aug 2013 2 Singer Simple 3210-3223-3229 A Pos Part No. 1 416604501 ARM SHAFT 2 270 V61473000 ARM SHAFT BALANCE 3 416122101 SET SCREW(M4
PIECES DE RECHANGES ERSATZTEILE SPARE PARTS PIEZAS DE RECAMBIO
PIECES DE RECHANGES ERSATZTEILE SPARE PARTS PIEZAS DE RECAMBIO May 1997 Printed in Switzerland 395 901 22 INDEX Accessory box, extension table, Needle plate, bottom cover 1 Upper cover, face plate 2 Front
MODEL: XV8500D XV8550D
MODEL: XV8500D XV8550D Published: Jul.,201 Revised: Dec.,2016 MODEL LIST Model Countries (Added Date) XV8500D USA, CAN, AUS (Jul / 201) XV8500D TWN (Nov / 2015) XV8550D USA (Jun / 2016) XV8550D CAN, AUS
Parts List S I N G E R. Model 7350 (Model 950D2) (1)
Parts List S I N G E R Model 7350 (Model 950D2) 029190036 (1) R A Page A Page A No. Part No. Description No. Part No. Description No. Part No. Description 1 EJD6033210 Back cover 37 V60273006 Dial tension
PARTS BOOK SL-777B SINGLE NEEDLE STRAIGHT LOCK STITCHER WITH SIDE CUTTER.
SL-777B PARTS BOOK SINGLE NEEDLE STRAIGHT LOCK STITCHER WITH SIDE CUTTER (Parts Navigation) The latest parts information, refer to the Parts Navigation. http://partsbook.brother.co.jp/partsnavi/chn/ http://partsbook.brother.co.jp/partsnavi/eng/
Confidence. Liste de pièces Lista de Piezas Parts List Oct 2007
Confidence 7463 Liste de pièces Lista de Piezas Parts List 104 22 97-96 15 Oct 2007 FACTORY MODEL SERIAL NO. 0 FIRST DIGIT IMPORTANT: WHEN ORDERING THE PARTS ALWAYS CHECK THE SERIAL NUMBER OF THE MACHINE.
Parts List. SINGER Model 1507
Parts List SINGER Model 1507 A-1 A-2 PageA Page A No. Part No. Description No. Part No. Description No. Part No. Description 1 V886253210 Front cover 37 V60303000 Thread guide spring 73 003010036 E-Ring
S-6200A PARTS BOOK 1 SINGLE NEEDLE STRAIGHT LOCK STITCHER WITH THREAD TRIMMER. Parts Navigation.
S-6200A PARTS BOOK 1 SINGLE NEEDLE STRAIGHT LOCK STITCHER WITH THREAD TRIMMER Parts Navigation The latest parts information, refer to the Parts Navigation. http://partsbook.brother.co.jp/partsnavi/jpn/
Z-8550A Z-8560A PARTS BOOK ELECTRONIC DIRECT DRIVE ZIGZAG LOCK STITCHER ELECTRONIC DIRECT DRIVE ZIGZAG LOCK STITCHER WITH THREAD TRIMMER
Z-80A Z-860A PARTS BOOK ELECTRONIC DIRECT DRIVE ZIGZAG LOCK STITCHER ELECTRONIC DIRECT DRIVE ZIGZAG LOCK STITCHER WITH THREAD TRIMMER Parts Navigation http://partsbook.brother.co.jp/partsnavi/jpn/ The
MC 350E PARTSLIST
1 2 1 2 2 2 1 26 1 6 2 2 1 6 6 2 1 22 1 1 20 2 1 21 1 0 2 NO. Parts # Description 1 620 2 006 60000 000061 20000 6 201001 2000 6222 200 620 60002002 00001 1 221002 1 600001 1 00 100 1 2206 1 00000 1 60600
ELECTRONIC DIRECT DRIVE LOCKSTITCH BUTTON HOLER
HE-800B PARTS BOOK ELECTRONIC DIRECT DRIVE LOCKSTITCH BUTTON HOLER Parts Navigation http://partsbook.brother.co.jp/partsnavi/jpn/ The latest parts information, refer to the Parts Navigation. http://partsbook.brother.co.jp/partsnavi/eng/
Parts list. Anna Juliet Romeo Sarah. Printed in Sweden. Made in Sweden (Replaces ) Jan-2001
Parts list Anna Juliet Romeo Sarah Printed in Sweden Made in Sweden Jan-2001 104 22 21-96 (Replaces 104 22 14-96) Part no. Description Square 411 72 10-01 Washer B 411 75 00-07 Needle bar compl. E 411
HE-800A PARTS BOOK ELECTRONIC LOCKSTITCH BUTTON HOLDER
HE-800A PARTS BOOK ELECTRONIC LOCKSTITCH BUTTON HOLDER Parts Navigation http://partsbook.brother.co.jp/partsnavi/jpn/ The latest parts information, refer to the Parts Navigation. http://partsbook.brother.co.jp/partsnavi/eng/
1. Arm Bed Components Ref. No Part No. Description Amount 1 H Model Plate 1 2 H Model Plate Rivet 2 3 H Bed Screw Stud
1. Arm Bed Components 1 H110-01-001 Model Plate 1 2 H110-01-002 Model Plate Rivet 2 3 H110-01-003 Bed Screw Stud 4 4 H110-01-004 Side Plate 1 5 H110-01-005 Gasket 1 6 H110-01-006 Screw 12/64-28 L=9 8 7
Compression ring 3mm G Compression ring 4mm F Compression ring 6mm F
Part no Description Square 411 72 10-01 Washer C 411 75 00-07 Needle bar compl. F 411 75 02-01 Neddle clamp F 411 75 03-01 Stop needle clamp F 411 75 05-01 Screw needle clamp F 411 75 04-01 Thread guide
T-8722B PARTS BOOK TWIN NEEDLE DIRECT DRIVE LOCK STITCHER WITH LARGE HOOK AND THREAD TRIMMER. (Parts Navigation)
T-8722B PARTS BOOK TWIN NEEDLE DIRECT DRIVE LOCK STITCHER WITH LARGE HOOK AND THREAD TRIMMER (Parts Navigation) The latest parts information, refer to the Parts Navigation. http://partsbook.brother.co.jp/partsnavi/chn/
MACHINE PARTS CHART SINGER*
-- ------ ----------"'- Form U 3 2 2 7 ( 6 8 1).. Part Nn543234-002 MACHINE PARTS CHART for.. SINGER* 20U43 * A Trademark of THE SINGER COMPANY Copyright 1981 THE SINGER COMPANY Alt Rights Reserved Throughout
PARTS CATALOGUE FOR KH-970 KNITTING MACHINE. Note: Parts marked * are new for KH-970 And not interchangeable with other models.
PARTS CATALOGUE FOR KH-970 KNITTING MACHINE Note: Parts marked * are new for KH-970 And not interchangeable with other models. PARTS FOR CARRIAGE UPPER PART Ref. No. Parts No. Description Revised Q ty
FACSIMILE EQUIPMENT PARTS REFERENCE LIST MODEL: MFC9420CN
FACSIMILE EQUIPMENT PARTS REFERENCE LIST MODEL: MFC9420CN Copyright Brother 2005 All rights reserved No part of this publication may be reproduced in any form or by any means without permission in writing
KE-434C KE-435C ELECTRONIC LOCKSTITCH PATTERN TACKER WITH STEPPING FOOT KE-435C
KE-434C BE-435C PARTS BOOK KE-434C KE-435C ELECTRONIC LOCKSTITCH PATTERN TACKERKE-434C ELECTRONIC LOCKSTITCH PATTERN TACKER WITH STEPPING FOOT KE-435C Parts Navigation http://partsbook.brother.co.jp/partsnavi/jpn/index.html
From the library of: Superior Sewing Machine & Supply LLC
CONTENTS Preface Speed of machine... 1 Oiling... 1 Needle... 2 Thm~... 2 Winding the bobbin... 3 Threading the machine and needle... 4 Prepare for sewing... 5 To start sewing...... 5 To regulate the length
TABLE OF CONTENTS S-4000 ISBH+I SM
TABLE OF CONTENTS Needle Bar... Clamping... Clamping Angle... Thread Trimmer... Shifter Mechanism... Feed Mechanism... Looper Mechanism... Base... Bite Mechanism... Thread Draw-off Mechanism... Main Cam...
GALKIN GALKIN AUTOMATED PRODUCTS GAP FLANGE MACHINE PARTS LIST
GALKIN AUTOMATED PRODUCTS GAP 3301-010 FLANGE MACHINE PARTS LIST Corporate Office Phone: 631-643-5432 Fax: 631-643-1472 97 OTIS STREET WEST BABYLON, NY 11704 Parts Department Phone: 631-643-5432 x120 Fax:
FACSIMILE EQUIPMENT PARTS REFERENCE LIST MODEL: MFC 7150C/MFC 7160C
FACSIMILE EQUIPMENT PARTS REFERENCE LIST MODEL: MFC 7150C/MFC 7160C Enable Thumbnails Enable Book Marks Exit Acrobat Viewer Copyright Brother 1998 All rights reserved No part of this publication may be
TABLE OF CONTENTS S-104-M
TABLE OF CONTENTS Head, Cam Case... 3-2 Stitch Cam Shaft... 3-4 Stitch Drive Shaft / Holder Assembly... 3-6 Needle Bar Drive and Vibrator... 3-8 Needle Bar... 3-10 Thread Guide and Thread Tension... 3-12
TABLE OF CONTENTS. S-4000 BH Omron. Needle Bar Clamping Thread Trimmer Shifter Mechanism Feed Mechanism...
TABLE OF CONTENTS S-4000 BH Omron Needle Bar... 2 Clamping... 4 Thread Trimmer... 6 Shifter Mechanism... 8 Feed Mechanism... 10 Looper Mechanism... 14 Base... 16 Bite Mechanism... 18 Knife Thread Draw-OFF
SINGER 211U UTT. From the library of: Superior Sewing Machine & Supply LLC
SINGER 211U UTT ILLUSTRATED PARTS LIST FOR SINGER UNDER BED THREAD TRIMMER FOR 211U157JA 165JA 166JA 566JA 567JB 157KA I 166KA 566KA 567KB A Trademark of THE SINGER COMPANY Copyright 1985 THE SINGER COMPANY
FACSIMILE EQUIPMENT PARTS REFERENCE LIST. MODEL: FAX4100 / 4750e / 5750e MFC8500 (For U.S.A. / Canada )
FACSIMILE EQUIPMENT PARTS REFERENCE LIST MODEL: FAX4100 / 4750e / 5750e MFC8500 (For U.S.A. / Canada ) Copyright Brother 2001 All rights reserved No part of this publication may be reproduced in any form
DNSEW, CONSOLIDATED SEWING MACHINE CORP. L INDUSTRIAL SEWING & CUTIING EQUIPMENT
S/nce ~8.98 DNSEW, CONSOLIDATED SEWING MACHINE CORP. L INDUSTRIAL SEWING & CUTIING EQUIPMENT MODEL 14TU854 PARTS BOOK 1 18 '%'29 'J. -- ~27 25... "'2a 26 2 NO. PART NO. QTY. DESCRIPTION 854 857 1 550705
MSK-1541S Industrial Sewing Machine. Instruction Manual
MSK-1541S Industrial Sewing Machine Instruction Manual CONTENT Operation Instruction 1. Brief introduction...1 2. Main specifications...1 3. Installation...1 4. Installing the oil box...2 5. Adjusting
PARTS REFERENCE LIST MODEL: EM-530 / 630
PARTS REFERENCE LIST MODEL: EM-530 / 630 NOTES FOR USING THIS PARTS REFERENCE LIST 1. In the case of ordering parts, it needs mentioning the following items: [ Example ] (1) Code (2) Q'ty (3) Description
MODEL: FAX4100New / 4100e / FAX4750eNew / 5750eNew
FACSIMILE EQUIPMENT PARTS REFERENCE LIST MODEL: FAX4100New / 4100e / FAX4750eNew / 5750eNew (For U.S.A. / Canada) Copyright Brother 2003 All rights reserved No part of this publication may be reproduced
MODEL: CM350 CM350H CM350R
MODEL: CM350 CM350H CM350R Published: Aug.,2015 Revised: Apr.,2018 MODEL LIST Model Countries (Added Date) CM350 USA, CAN, AUS (August / 2015) CM350H USA (August / 2015) CM350R USA (August / 2015) CM350
NEW SYSTEM SPECIFICATIONS AND DIAGRAMS
NEW SYSTEM SPECIFICATIONS AND DIAGRAMS GAMMILL, INC. 1452 Gib son St., West Plains, MO 65775 800-659-8224 TABLE OF CONTENTS Diagram #1: Internal Components...1 Diagram #2: External Components...2 Diagram
1-NEEDLE LOCKSTITCH SEWING MACHINE WITH AUTOMATIC THREAD TRIMMER FOR PROFESSIONAL. TL series SERVICE MANUAL. No
1-NEEDLE LOCKSTITCH SEWING MACHINE WITH AUTOMATIC THREAD TRIMMER FOR PROFESSIONAL TL series SERVICE MANUAL No.00 40175681 CONTENTS [1] SPECIFICATIONS... 1 [2] NAMES OF COMPONENTS... 3 [3] DISASSEMBLY AND
Specifications Application For medium materials For heavy materials For extra heavy materials
LT2 B875 Mark II Twin Needle Needle Feed Split Needle Bar Lock stitcher with Large Hook (and Thread Trimmer) Specifications 3 5 7 Application For medium materials For heavy materials For extra heavy materials
RH-981A Electronic Eyelet Button Holer
RH-981A Electronic Eyelet Button Holer RH-981A- Upper Lower thread trimmer Upper gimp Special lapel thread Long Short Fly indexer guide cutting device trimmer type type -00 - - - Option Option -01 - -
Part List 300UX6 SINGER and the Cameo S Design are exclusive trademarks of The Singer Company Limited S.à r.l. or its Affiliates. 2012 The Singer Company Limited S.à r.l. or its Affiliates. All rights
9/8/ MSHZ 2001 / TOP COWLING Yamaha Motor Corporation, U.S.A. All rights reserved.
9.9MSHZ 00 Page of 47 9/8/04 9.9MSHZ 00 / TOP COWLING 04 Yamaha Motor Corporation, U.S.A. All rights reserved. 9.9MSHZ 00 Page of 47 9/8/04 Part List 9.9MSHZ 00 / TOP COWLING REF - NO PART NUMBER PART
B. Cylinder Bed Compound Needle Feed Lockstitch Sewing Machine. Instruction Manual and Parts Catalog
artisan 2618.2-1B Cylinder Bed Compound Needle Feed Lockstitch Sewing Machine Instruction Manual and Parts Catalog Artisan Sewing Supplies, LLC, San Francisco, California CONTENTS INSTRUCTION MANUAL Ⅰ.PRECAUTIONS
file://c:\programdata\proquestms\partsmanagerpro\print\ ~13~11~5.html
C60TLRZ 00 file://c:\programdata\proquestms\partsmanagerpro\print\8-9-0 ~~~5.html Page of 6 8/9/0 C60TLRZ 00 / TOP COWLING 0 Yamaha Motor Corporation, U.S.A. All rights reserved. C60TLRZ 00 file://c:\programdata\proquestms\partsmanagerpro\print\8-9-0
A B C D E F G H I J K L M N O P Q R S T U. Body & Table. Stand (Option) Arm. Arm. Wiper Set. Head. Bed. Picker Set. X-Axis Drive Set.
Machine Layout CONTENT A B C D E F G H I J K L M N O P Q R S T U Body & Table Stand (Option) Arm Arm Main Drive System Wiper Set Color Change Set Head Thread Tension Unit Bed Picker Set Thread Cutting
Laser MFC PARTS REFERENCE LIST MODEL: FAX-2840/2845/2940/ MFC-7240
Laser MFC PARTS REFERENCE LIST MODEL: FAX-2840/2845/2940/ MFC-7240 Read this list thoroughly before maintenance work. Keep this list in a convenient place for quick and easy reference at all times. April
CONTENT A B C D E F G H I J K L M N O P Q R S T U. (This is a parts book. It cannot be used as a manual. ) Body & Table. Stand (Option) Arm I.
PME-050525 Machine Layout CONTENT (This is a parts book. It cannot be used as a manual. ) A B C D E F G H I J K L M N O P Q R S T U Body & Table Stand (Option) Arm I Arm II Main Drive System Wiper Set
MODEL: HL-3040CN/3070CW
Color Printer PARTS REFERENCE LIST MODEL: HL-3040CN/300CW Read this list thoroughly before maintenance work. Keep this list in a convenient place for quick and easy reference at all times. July 2009 PL-PRN110
TABLE OF CONTENTS. S4000 LT Omron
TABLE OF CONTENTS Needle Bar... 3-2 Clamping... 3-4 Thread Trimmer & Material Trimming... 3-6 Shifter Mechanism... 3-8 Feed Mechanism... 3-10 Looper Mechanism... 3-14 Base... 3-16 Bite Mechanism... 3-18
FACSIMILE EQUIPMENT PARTS REFERENCE LIST. MODEL: DCP8040 / 8045D MFC8440 / 8640D / 8840D / 8840DN (For U.S.A / Canada / Brazil)
FACSIMILE EQUIPMENT PARTS REFERENCE LIST MODEL: DCP8040 / 8045D MFC8440 / 8640D / 8840D / 8840DN (For U.S.A / Canada / Brazil) Copyright Brother 2004 All rights reserved No part of this publication may
CS340ES. Property of - Not for Resale A1
A1 CYLINDER HEAD - CYLINDER 1 8G8-11111-00-00 HEAD, CYLINDER 1......... 1 2 8G8-11121-00-00 HEAD, CYLINDER 2......... 1 3 NGK-BR9ES-00-00 PLUG, SPARK............. 2 4 8G8-11181-01-00 GASKET, CYLINDER HEAD
DNSE. Model 14TU. Parts Book. From the library of: Superior Sewing Machine & Supply LLC
DNSE Model 14TU Parts Book. A lli'dj "l 4 5 26 A - DESCRPTON 1 Reflection aluminum plate 2 +- binding head screw 4 x 6 3 Plain washer 4 Needle thread guide 5 Flat head screw 3 x 6 6 Light cover 7 Handle
BRAND RHINCOEROS SHOE REPAIR MACHINE MS From the library of: Superior Sewing Machine & Supply LLC. *13.! : 'fij7}5 OOjf. c El~ ~~, m~ & ~fl:ffl)
RHINCOEROS BRAND SHOE REPAIR MACHINE MS-2971 i'jljf!!~j!j!ll!hl~~;;t*l.$ ~m?tom c ~~) ~1 1~ c El~ ~~, m~ & ~fl:ffl) ~Dft-T, ~ It ' ffiift ' ~-T ' ~~~&ft-t $g~gffwiii~ MI J~ ~'*W\~~m~* *I ~}L :ffl~~w\i
HSF Screw Presenter Parts List
Diassembling and Reassembling (Step - A) B Block "B" Assembly 1 1 Circuit Board 41-NSN09001b 1 2 Coaching Clip 41-CS-9 1 3 Pan Head Screw CP 41-M2.6x5 2 4 Cover - Left 41-NSN08104 1 5 Plus Socket Head
KUBOTA WATER-COOLED DIESEL ENGINE
SPARE PARTS CATALOGUE KUBOTA WATER-COOLED DIESEL ENGINE MODEL: E75N E75NB3 0001 010 14418-0101-0 Crankcase Compl. 1 1 0001 020 14971-2671-0 Plug, Seal 2 2 0001 030 14301-3363-0 Pin Plug 2 2 0001 040 05012-00612
FACSIMILE EQUIPMENT PARTS REFERENCE LIST. MODEL: MFC8220 (For U.S.A / Canada)
FACSIMILE EQUIPMENT PARTS REFERENCE LIST MODEL: MFC8220 (For U.S.A / Canada) Copyright Brother 2004 All rights reserved No part of this publication may be reproduced in any form or by any means without
9/7/2014 T9.9ELRZ 2001 / TOP COWLING Yamaha Motor Corporation, U.S.A. All rights reserved.
T9.9ELRZ 00 Page of 56 9/7/0 T9.9ELRZ 00 / TOP COWLING 0 Yamaha Motor Corporation, U.S.A. All rights reserved. T9.9ELRZ 00 Page of 56 9/7/0 Part List T9.9ELRZ 00 / TOP COWLING REF - NO PART NUMBER PART
WILLCOX & GIBBS. CLASS 401 MACHINES ( chainstitch)
PARTS CATALOG WILLCOX & GIBBS. CLASS 40 MACHINES ( chainstitch) - Cat No 8465(023 40 035) J. ' From the library of: Superior Sewing Machine & Supply LLC J From the library of: Superior Sewing Machine &
AstroJet TM M1-C Color Label Printer. Parts Manual
AstroJet TM M-C Color Label Printer Parts Manual This manual is intended solely for the use and information of Astro Machine Corp., its designated agents, customers, and their employees. The information
EUROPEAN REAR ENGINE RIDER SERIES 20
Parts Manual for EUROPEAN REAR ENGINE RIDER SERIES 20 MODEL E281320BE E331520KVE McDonough, GA, 30253 U.S.A. Briggs & Startton Yard Power Products Group Copyright 2006 Briggs & Startton Corporation Milwaukee,
Chain Box and Knife. Item # Description Part Number 180-D & GS
Chain Box and Knife Item # Description Part Number 180-D & GS 1 Groove pin 2275-03160 2 Hex cap screw 2175-03061 3 Washer 2275-03060 4 Setscrew 2175-07163 5 Chain box 4975-00355 6 Berkel logo 3175-00152
Mã số EB7660TH PETROL BLOWER
Page 1 / 6 001 412144-8 ELBOW 1 002 213645-7 O RING 93 1 005 803T61-7 CAUTION LABEL 1 006 814E64-6 SERIAL NO. LABEL 1 008 456398-7 FRONT VOLUTE CASE 1 010 922343-9 H.S.H.BOLT M6X25 WITH WR 6 011 240152-7
CYLINDER HEAD - CYLINDER
A1 CYLINDER HEAD - CYLINDER 1 (1W6-11111-00-00) HEAD, CYLINDER 1......... 1 (2K9-11111-00-00) HEAD, CYLINDER 1......... 1 2 1W3-11181-00-00 GASKET, CYLINDER HEAD 1. 1 500-11181-00-00 GASKET, CYLINDER HEAD
01 CYLINDER HEAD COVER 4 02 CRANKSHAFT, PISTON 6 03 FAN, AIR SHROUD 8 04 OIL PUMP (EPA) REED VALVE, AIR CLEANER CARBURETOR 14
Parts Manual 1 2 CONTENTS PAGE 01 CYLINDER HEAD COVER 4 02 CRANKSHAFT, PISTON 6 03 FAN, AIR SHROUD 8 04 OIL PUMP (EPA) 10 05 REED VALVE, AIR CLEANER 12 06 CARBURETOR 14 07 EXHAUST 16 08 CRANKCASE 18 09
AK85B INSTRUCTION MANUAL
AK85B INSTRUCTION MANUAL No.00 40140429 Congratulations on your purchase of a JUKI's window-plate-mounting type Auto lifter. The main features of this device are as follows: 1) Simple installation, 2)
Color Printer PARTS REFERENCE LIST MODEL:HL-3140CW/ 3150CDW/3170CDW
Color Printer PARTS REFERENCE LIST MODEL:HL-3140CW/ 3150CDW/3170CDW Read this list thoroughly before maintenance work. Keep this list in a convenient place for quick and easy reference at all times. January
Copyright 11/2000, revised 3/2004 Barudan America, Inc. Part Numbers are subject to change due to continuing improvements
b B2000 PARTS BOOK Copyright 11/2000, revised 3/2004 Barudan America, Inc. Part Numbers are subject to change due to continuing improvements Parts Identification Base Assembly H/Y Base Assembly - Drive
ELECTRIC TOOL PARTS LIST
Hitachi Power Tools LIST E945 ELECTRIC TOOL PARTS LIST COMPOUND SAW Model 2006 10 11 (E1) 1 2 602 603 4 5 6 7 3 8 9 10 11 12 22 23 24 25 26 601 30 31 32 33 604 605 606 607 608 628 601 609 13 14 15 16 17
PARTS CATALOGUE. Rockford Motors inc.
PARTS CATALOGUE Rockford Motors inc. INSTRUCTIONS FOR USING THE PARTS CATALOGUE 1. This catalogue covers all the items of genuine parts and tools of BRIDGESTONE 350 GTR and 350 GTO motorcycles. 2. Please
CYLINDER HEAD CONTINUED ON NEXT FRAME. Ref. Part No. Number Description Qty Remarks
A1 A2 A3 A4 CYLINDER HEAD 1 3TB-11101-02-00 CYLINDER HEAD ASSY...... 1 2 4H7-11133-10-00. GUIDE, INTAKE VALVE..... 4 3 93440-12052-00. CIRCLIP................. 4 4 90116-06475-00. BOLT, STUD.............
CYLINDER. Ref. Part No. Number Description Qty Remarks
A1 CYLINDER 1 (3R4-11111-00-00) HEAD, CYLINDER 1......... 1 2 1W3-11181-00-00 GASKET, CYLINDER HEAD 1. 1 3 (CMP-N2G00-00-00) CHAMPION N2G 10PK....... 1 4 90116-08321-00 BOLT, STUD.............. 6 5 90179-08491-00
MODEL: HL-4140CN/4150CDN/ 4570CDW/4570CDWT
Color Laser Printer PARTS REFERENCE LIST MODEL: HL-440CN/450CDN/ 4570CDW/4570CDWT Read this list thoroughly before maintenance work. Keep this list in a convenient place for quick and easy reference at
9/7/2014 F9.9MSHV 1997 / CYLINDER CRANKCASE Yamaha Motor Corporation, U.S.A. All rights reserved.
F9.9MSHV 997 Page of 45 9/7/04 F9.9MSHV 997 / CYLINDER CRANKCASE 04 Yamaha Motor Corporation, U.S.A. All rights reserved. F9.9MSHV 997 Page of 45 9/7/04 Part List F9.9MSHV 997 / CYLINDER CRANKCASE REF
Owner s Manual PARTS LISTING
Owner s Manual PARTS LISTING 35 Cylinder head system assy. SP-GG350-A-01-JD CYLINDER HEAD COMP. JF200-A-01 SP-GG350-A-02-JD EX. VALVE GUIDE JF168-A-02 SP-GG350-A-03-JD IN. VALVE GUIDE JF168-A-03 SP-GG350-A-04-JD
CYLINDER - CRANKCASE. Ref. Part No. Number Description Qty Remarks
A1 CYLINDER - CRANKCASE 1 (374-15111-00-00) CRANKCASE 1............ 1 2 374-15121-02-00 CRANKCASE 2............ 1 3 99510-12016-00 PIN, DOWEL.............. 2 4 98580-06550-00 SCREW PAN HEAD (92503-06050).............
PANASONIC Models: MC-9410, MC-9420, MC-9430, MC-9440
Dust Cover and Attachments A1... P-12429... Indicator Plate, 9410 A1... P-12430... Indicator Plate, 9420 A1... P-12431... Indicator Plate, 9430 A1... P-12432... Indicator Plate, 9440 A2... P-12433... Indicator
rev 5_ EX2650LH CS C CS-246.4CBC
CS-246.4 C BC 1 Main Pipe Assembly, Handle A15 A14 A13 A03 A12 2 1 Main Pipe Assembly, Handle 1 2 451601-1 SPACER 1 1 1 1 3 141238-9 SHAFT COMPLETE 1 1 1 1 4 195143-2 HANGER SET 1 1 1 INC. 5 1 5 911233-1
CYLINDER HEAD. Ref. Part No. Number Description Qty Remarks
A1 A2 A3 A4 CYLINDER HEAD 1 3FA-11110-01-00 CYLINDER HEAD ASSY...... 1 2 90116-06541-00. BOLT, STUD............. 2 3 22F-11134-10-00. GUIDE, EXHAUST VALVE... 2 4 93440-10109-00. CIRCLIP.................
REF. NO. DESCRIPTION TOP COWLING 2 MOLDING, AIR DUCT 3 RIVET 4 SEAL 5 HOLDER, CLAMP BAND 6 BOLT, WITH WASHER 7 HOOK
SUZHOU ALLPASS MACHINERY CO.,LTD Add:No.85,Jishui Road,Jinfeng Industrial Park,Mudu Town,Suzhou 215102,Jiangsu,P.R.China T15 SPARE PARTS EXPLODED DRAWING FIG. 1 1 TOP COWLING TOP COWLING 2 MOLDING, AIR
ATV 50 DVX BLACK-RED (A2008KSA2BUSD) Page 1 of 60 AIR INTAKE ASSEMBLY
2008 ATV 50 DVX BLACK-RED (A2008KSA2BUSD) Page 1 of 60 AIR INTAKE ASSEMBLY 2008 ATV 50 DVX BLACK-RED (A2008KSA2BUSD) Page 2 of 60 AIR INTAKE ASSEMBLY Ref # Part Number Qty S/P/F Description 1 3303-005
OPERATION MANUAL Electric Wire Wrapper TDWW501B
OPERATION MANUAL Electric Wire Wrapper TDWW501B 4270 Airborn Drive Addison, Texas 75001 USA t. 972.248.1999 f. 972.248.1991 info@startinternational.com www.startinternational.com INTRODUCTION Thank you
Makita Werkzeug Ges.m.b.H. Kolpingstrasse 13, 1230 Wien Tel: 01 / * Fax: 01 / Mail: Web:
Kolpingstrasse, 0 Wien Tel: 0 / 66 7 0-0* Fax: 0 / 66 7 0-0 Makita Service Information / Model: EM65UH Seite / (c) 0 by Makita Austria. All Rights Reserved. Änderungen und Irrtümer vorbehalten / MSIO V.0