HVAC Automatic Balance Valve Index
|
|
|
- Buddy Andrews
- 5 years ago
- Views:
Transcription
1 HVC utomatic alance Index Weights Individual Weights Y-all Models Flow Rate (GPM) Connection Size Page /4 to 3/4 V-SPEC /2 to 3/4 V-SPEC /2 to 3/4 V-SPEC /2 to 1 V-SPEC /2 to 1 V-SPEC /4 to 1-1/2 V-SPEC-2524 Inline Models Flow Rate (GPM) Connection Size Page /2 to 1 V-SPEC /2 to 1 V-SPEC /4 to 1-1/2 V-SPEC to 1-1/2 V-SPEC to 2-1/2 V-SPEC to 3 V-SPEC to 4 V-SPEC to 10 V-SPEC ,000 6 to 36 V-SPEC /2 to 3/4 V-SPEC /4 to 1 V-SPEC-2521
2 Sizes: 1/4, 3/8, 1/2 & 3/4 GPM: Type: Y-all utomatic alancing Model: 2519 Pressure Temperature Ports Outlet FNPT, FSWT and MNPT Outlet / Connections 3/4 Union Ends Differential Operating Pressure: 2 80 PSID GPM 3 80 PSID GPM and Outlet Port Options Short Handle (Shown) Weighs between lbs. Suitable for 600 PSIG Plugged (Ports Machined w/1/4 Plug) Extended Handles Short Handle (Standard) all Pressure / Temperature Ports all Seat Stem End Cap all End Fitting Zinc Plated Steel Chrome Plated Teflon OVERLL LENGTH (ll length calculations are machined union end fittings) Outlet 1/4 FSWT 38 FSWT 1/2 FNPT 1/2 MNPT 1/2 FSWT 3/4 FNPT 3/4 MNPT 3/4 FSWT 1/4 FSWT /8 FSWT /2 FNPT /2 MNPT /2 FSWT /4 FNPT /4 MNPT /4 FSWT V-SPEC
3 Sizes: 1/2 & 3/4 GPM: Type: Y-all utomatic alancing w/iso 5211 ctuator Pad Model: 2518 Pressure Temperature Ports ISO Pad Outlet V FNPT, FSWT and MNPT Outlet / Connections Union 3/4 Union Ends Differential Operating Pressure: 2 80 PSID GPM 3 80 PSID GPM and Outlet Port Options Weighs between lbs. without the actuatorª Suitable for 600 PSIG Cycle Life of all Greater than 100,000 Full Cycles Modified Equal Percentage Cv s of 1.1, 2.0, 2.6 and 3.0 Torque Less Than 35 in. lbs.@300 PSID Quick Opening Cv of 4.5 (No Disc) ctuator Pad ISO 5211/F03/Y/D/9 NSI Class V Seat Leakage Plugged (Ports Machined w/1/4 Plug) V-SPEC Union End all Pressure / Temperature Ports all Seat Stem End Cap all End Fitting OVERLL LENGTH Outlet 1/2 FNPT 3/4 MNPT 1/2 MNPT Chrome Plated Teflon 3/4 MNPT 1/2 FSWT 1/2 FNPT /4 FNPT /2 MNPT /4 MNPT /2 FSWT /4 FSWT /4 FSWT ªRefer to Components Section for specifications on TC4 & TC5 to be used only with the 2518 Mesurflo valve.
4 Sizes: 1/2 & 3/4 GPM: Type: Y-all utomatic alancing Model: 2517 Outlet FSWT Outlet / Connections Differential Operating Pressure: 2 80 PSID GPM 3 80 PSID GPM 5 80 PSID GPM 7 80 PSID GPM Suitable for 600 PSIG End Cap Size 1/2 3/4 IN MM IN MM C V-SPEC
5 Sizes: 1/2, 3/4 & 1 GPM: Type: Y-all utomatic alancing Model: 2516 FNPT, FSWT and MNPT Outlet / Connections Differential Operating Pressure: 2 80 PSID GPM 3 80 PSID GPM 5 80 PSID GPM 7 80 PSID GPM Short or Lever Handle and Outlet Port Options Suitable for 600 PSIG Extended Handles all Chrome Plated Pressure / Temperature Ports all Seat Teflon Stem End Cap all End Fitting Short Handle Zinc Plated Steel IN MM IN MM V V-SPEC
6 Sizes: 1/2, 3/4 & 1 GPM: Type: Y-all utomatic alancing Model: 2514 FNPT, FSWT and MNPT Outlet / Connections Differential Operating Pressure: 2 80 PSID GPM 3 80 PSID GPM 5 80 PSID GPM 7 80 PSID GPM Short* or Lever Handle Right or Left Hand Porting and Outlet Port Options Suitable for 600 PSIG None (Ports Not Machined) Plugged (Ports Machined w/1/4 Plug) Extended Handles Manual ir Vent (Placed in Top Port) Union End all Chrome Plated Pressure / Temperature Ports all Seat Teflon Stem End Cap all End Fitting Short Handle Zinc Plated Steel Coupling Nut IN MM IN MM E F C G D V-SPEC
7 Sizes: 3/4, 1, 1-1/4 & 1-1/2 GPM: Type: Y-all utomatic alancing Model: 2524 FNPT, FSWT and MNPT Outlet / Connections Differential Operating Pressure: 2 80 PSID GPM 3 80 PSID GPM Short or Lever Handle Right or Left Hand Porting and Outlet Port Options Suitable for 600 PSIG Plugged (Ports Machined w/1/4 Plug) Extended Handles Manual ir Vent (Placed in Top Port) Union End all Chrome Plated Pressure / Temperature Ports all Seat Teflon Stem End Cap all End Fitting Short Handle Zinc Plated Steel Coupling Nut Holder IN MM IN MM E F C G D V V-SPEC
8 Sizes: 1/2, 3/4 & 1 GPM: Type: utomatic alancing Model: 2513 Outlet 1/2, 3/4 & 1 FSWT / Outlet Connections 3/4 Female & Male Garden Hose / Outlet Connections 1/2 & 3/4 FNPT & MNPT / Outlet Connections 2 80 PSID Range Suitable for 600 PSIG Tailpiece Coupling Nut IN MM IN MM V-SPEC
9 Sizes: 1/2, 3/4 and 1 GPM: Type: utomatic alancing Model: 2510 FNPT and MNPT / Outlet Connections 2 80 PSID Range Suitable for 600 PSIG & Flow Rate Union Nut Tailpiece Pressure / Temperature Ports Retainer Ring IN MM IN MM V-SPEC
10 Sizes: 3/4, 1, 1-1/4 & 1-1/2 GPM: Type: utomatic alancing Model: 2520 FlowDirection Pressure Temperature Ports Outlet FNPT and MNPT Connections FNPT, FSWT and MNPT Outlet Connections Differential Operating Pressure 2 80 PSID Range GPM 3 80 PSID Range GPM Suitable for 600 PSIG Plugged (Ports Machined w/1/4 Plug) Union Nut Tailpiece Pressure / Temperature Ports Retainer Ring IN MM IN MM /8 29 V-SPEC
11 Sizes: 1, 1-1/4 & 1-1/2 GPM: Type: utomatic alancing Model: 2530 FNPT /Outlet Connections 1 GPM Increments Differential Operating Pressure 2 80 PSID , GPM 3 80 PSID , GPM 4 80 PSID GPM Suitable for 400 PSIG Gray Iron Tailpiece Gray Iron Pressure / Temperature Ports Retainer Cage Holder olt & Nut Steel Plug Laser Cut Center Plate C Size IN MM IN MM IN MM 1 3.3/ / / V-SPEC
12 Sizes: 2 & 2-1/2 GPM: Type: utomatic alancing Model: 2535 FNPT /Outlet Connections 1 GPM Increments Differential Operating Pressure 2 80 PSID , GPM 3 80 PSID GPM 4 80 PSID GPM Suitable for 400 PSIG Gray Iron Pressure / Temperature Ports Retainer Cage Holder Plug Center Plate Size IN MM IN MM 2 1 7/ /2 1 7/ V-SPEC
13 Sizes: 2, 2-1/2 & 3 GPM: Type: utomatic alancing Model: 2540 Pressure Temperature Ports Outlet FNPT /Outlet Connections 5 GPM Increments Differential Operating Pressure 2 80 PSID GPM 3 80 PSID GPM Suitable for 400 PSIG Ductile Iron Pressure / Temperature Ports Retainer Cage Holder Center Plate 4 Hole Pattern Size IN MM / V-SPEC
14 Sizes: 2, 2-1/2, 3 & 4 GPM: Type: utomatic alancing Model: 2545 Pressure Temperature Ports Outlet Flanged /Outlet Connections 1 GPM Increments GPM 5 GPM Increments GPM Flow Cartridges are Not Changeable is Hermetically Sealed Differential Operating Pressure 2 80 PSID Class 150 Flanges 4 olt Flange on 2 3 s 8 olt Flange on 4 s Suitable for 400 PSIG Flange Pressure / Temperature Ports Retainer Cage Holder Center Plate V-SPEC Size 2 2-1/2 3 4 Length/Diameter Flow Rate GPM Flow Rate GPM Flow Rate GPM N/
15 Sizes: 4, 6, 8, & 10 GPM: Type: utomatic alancing Model: 2560 *Flanged Shown Flanged*, Grooved or Welded /Outlet Connections 10 GPM Increments Differential Operating Pressure 2 80 PSID 1/4 Extended Pressure / Temperature Ports Suitable for 400 PSIG Flange Rating: 150 lb. dditional Sizes and GPM s vailable, Consult Factory Flange Ext. Pressure / Temperature Ports dapter Plate Retainer Cage Holder Clip Outlet End End (pproximate) Length may vary with GPM selection -Welded C-Flanged D-Grooved End E-Victaulic Ring Dimension Welded & Grooved Size IN MM IN MM IN MM IN MM IN MM / / / / / / / / / / / / / V V-SPEC
16 Sizes: 6, 8, 10, 12, 14, 16, 18, 20, 24, 30 & 36 GPM: ,000 Type: utomatic alancing Model: 2570 Flanged Outlet Connections 10 GPM Increments Differential Operating Pressure 2 80 PSID Where Not Limited y pplication Operating Temperature Range 32 to 225 F 1/8 Pressure / Temperature Ports Suitable for 400 PSIG Standard Flanges Per NSI 16.5 Flange Rating: 150 lb. 1/8 Extended Pressure / Temperature Ports dditional Sizes and Custom Flanges vailable, Consult Factory Flange Pressure / Temperature Ports End Plate Retainer Cage Holder 8 olt Flange (pproximate) Length may vary with GPM selection IN MM IN MM IN MM IN MM IN MM IN MM IN MM IN MM IN MM Size / / / / / / / C IN MM IN MM Size / / C V-SPEC
17 Sizes: 1/2, & 3/4 GPM: Type: utomatic alancing Model: 2511 Outlet FSWT / Outlet Connections 2 80 PSID Range vailable in 4 or 5 1/2 Lengths Suitable for 522 PSIG Copper Retainer 1/2 3/4 4 (114) 5 1/2 (140) 4 (114) 5 1/2 (140) IN MM IN MM IN MM IN MM C V V-SPEC
18 Sizes: 3/4 & 1 GPM: Type: utomatic alancing Model: 2521 FSWT / Outlet Connections 2 80 PSID Range GPM 3 80 PSID Range GPM Suitable for 522 PSIG Copper Retainer Cage Holder Cartridge Holder Size 3/4 (19) 1 (25) IN MM IN MM C V-SPEC
Table of Contents. Automatic Section A B V. Coil Piping Packages A B P P. Water Source Heat Pump Hose Kits A B H K
Table of Contents Automatic Section Automatic Balance Valves Installation Operation Maintenance Instructions / Warranty Technical Information How To Order Coil Piping Packages Package Types How To Order
Hose Length Custom Length Supply Line Options Ball Valve w/ PT UBY Strainer w/ PT and BDV
Model AC Circuit Sentry Automatic Balance Hose Kits - Submittal Hose Kit Size Flow Range *MFR Qty. 1/2".33-14 5 3/4".33-14 11 3/4" 5-50 11 1".33-14 20 1" 5-50 20 1-1/4" 5-50 30 **1-1/2" 5-50 44 **1-1/2"
Innovation + Quality. Valves, controls + systems Balancing and Control Valves
Innovation + Quality Valves, controls + systems Balancing and Control Valves Balancing and Control Valves Catalog Hydrocontrol Static Balancing Valves Recomended flow rate chart 4 Hydrocontrol VTR Static
SECTION (15110) - GENERAL DUTY VALVES FOR PLUMBING PIPING
SECTION 22 05 23 (15110) - GENERAL DUTY VALVES FOR PLUMBING PIPING PART 1 GENERAL 1.01 SUMMARY A. Section Includes: 1. Valves. B. Related Sections: 1.02 REFERENCES 1. Section 22 05 53 (15075) Identification
197C. Valve Group. Series Farris Engineering Pressure Relief Valves
97 Valve Group Series 700 Farris Engineering Pressure Relief Valves Numbering System Selecting and specifying Farris pressure relief valves is simple using the numbering system that follows. Each digit
CONN in mm in mm in mm SIZE lbs kg PX " /4"
ccessories 1 PV MNUL IR VENT PRESSURE / TEMPERTURE ombination Manual ir Vent and Pressure/Temperature Test Port with brass body, dual durometer EPDM core, blowout-proof stem, side discharge vent with 1/8
Cipriani Harrison Valves Corp.
pplication Sanitary ball valves are used in stainless steel piping systems for isolation, either manually or automatically operated. The full port design with zero flow restriction makes it an optimum
Innovation + Quality. Valves, controls + systems Balancing and Control Valves
Innovation + Quality Valves, controls + systems Balancing and Control Valves Cocon Q Pressure independent control valve Product specification Size: L1 L2 H1 H2 ½, ½ LF 2.75 3.9 2.0 1.9 ¾ LF 2.9 4.2 2.0
PARTS & ASSEMBLY DRAWINGS SECTION 1. Jacket
000SVRM-3 /7 CONTROL VALVE PARTS & ASSEMBLY DRAWINGS SECTION Base Valve O-ring O-ring Sleeve Cage/Barrier Assembly Spacer Jacket Description 2 Valve 3 Valve Base Valve, 0-40 psi 2255-000 2239-0090 Base
Butterfly Valves. Applications. Pressures To 200 PSIG Temperatures to 300 F BUTTERFLY VALVES FEATURES MATERIALS OF CONSTRUCTION SEAT MATERIALS
pplications Process Industry Pulp and Paper Power Industry Metals and Mining Chemical Industry Water and Waste Oil and Gas utterfly Valves Pressures To 200 PSIG Temperatures to 300 F FETURES Positive Shutoff
HVAC. Products. TRI A FLO Automatic Cartridges PAGE 2. TRI Y FLO Strainer PAGE 3. TRI U FLO Accessory Union PAGE 4. CB Series Butterfly/Venturi PAGE 5
HVAC TRI A FLO Automatic Cartridges TRI Y FLO Strainer TRI U FLO Accessory Union Products Automatic balancing valves.5 thru 108.0 in Brass, Stainless, PVC, CPVC, Titanium, Ceramic, Monel, and more PAGE
Electronic Globe Valve Guide Specifications
Electronic Globe Valve Guide Specifications Two and Three-Way Screwed Valves Valves 1/2" through 2" shall be bronze body, NPT screw type, and shall be rated for NSI Class 250 working pressure. The operating
CALEFFI. FLOWCAL Automatic flow balancing valve with polymer cartridge. 121 series 01141/11 NA. Function
FLOWCAL Automatic flow balancing valve with polymer cartridge 121 series REGISTERED BSI EN ISO 9001:2000 Cert. n FM 21654 UNI EN ISO 9001:2000 Cert. n 0003 CALEFFI 01141/11 NA Function The FlowCal automatic
VB-9313 Series. Application. Features. Applicable Literature
V-9313 Series 2-1/2" and 3" Screwed NPT 2-1/2" to 6" 125 Lb. Flanged Three-Way Mixing s General Instructions pplication V-9313 series three-way mixing valves control hot or chilled water in heating or
Modulating Water Valves and Bulb Wells
Modulating Water Valves and ulb Wells PPLITION: These modulating valves regulate the flow of water to the heat exchanger to maintain a desired exiting oil temperature. They open automatically when temperature
SEE VICTAULIC PUBLICATION FOR DETAILS
dapters SEE VICTULIC PULICTION 10.01 FOR DETILS Style 741 Style 741 adapter is designed for directly incorporating flanged components with NSI CL. 125 or CL. 150/PN10 and PN16 or ustralian Standard Table
VB-9313 Series. Application. Features. Applicable Literature
V-9313 Series 2-1/2" and 3" Screwed NPT 2-1/2" to 6" 125 Lb. Flanged Three-Way Mixing s General Instructions pplication V-9313 series three-way mixing valves control hot or chilled water in heating or
Automizer Combination Control Valves
Combination Control Valves Recommended Applications Where actuated valves and balancing valves are used to control the flow For VAV boxes, fan coil units and terminal boxes Where space is tight Absolute
Table of Contents. Manual Section M B V M B P P M B H K. Coil Piping Packages. Water Source Heat Pump Hose Kits
Table of Contents Manual Section Manual Balance Valves Installation Operation Maintenance Instructions / Warranty Technical Information How To Order Coil Piping Packages Package Types How To Order Submittal
VB-9213 Series. Application. Features. Applicable Literature
VB-9213 Series 2-1/2" and 3" Screwed NPT 2-1/2" to 6" 125 Lb. Flanged Stem Down to Close Two-Way Valves General Instructions pplication VB-9213 series single seat, stem down to close, twoway valves control
PIC-V Valve... 1 Unimizer (1/2 to 3 )... 2 Unimizer (4 to 6 )... 3 Automizer... 4 MVP Valve... 5
PERFORMANCE SPECIFICATIONS PIC-V Valve... 1 Unimizer (1/2 to 3 )... 2 Unimizer (4 to 6 )... 3 Automizer... 4 MVP Valve... 5 PIC-V Valve 1. PRESSURE INDEPENDENT ACTUATED BALL VALVES AND CARTRIDGE (PIC-V)
FILTERS, STRAINERS AND VALVES PRODUCT GUIDE
FILTERS, STRAINERS AND VALVES PRODUCT GUIDE TEE FILTERS INLINE FILTERS BRASS FILTERS SPIN ON FILTERS OFF-LINE FILTRATION Y STRAINERS BASKET STRAINERS DUPLEX STRAINERS STRAINING ELEMENTS FRP STRAINERS DUAL
Series Pressure Relief Valves 197C
Series 2700 Pressure Relief Valves 197C Table of Contents General Description...IFC Ordering Information & Numbering System...1 Bill of Materials-Conventional...2 Bill of Materials-Balanced Design...3
BRASS BALL VALVES. CSA, UL, cul CGA 9.1 and FM Approved. Female NPT, Male NPT and Flare ends in various configurations from 3/8 to 1.0.
195 Series Ball Valves BRASS BALL VALVES CSA, UL, cul CGA 9.1 and FM Approved. Female NPT, Male NPT and Flare ends in various configurations from 3/8 to 1.0. Hot forged brass body Blow-out nickel plated
Specifications. Body Materials: Carbon steel, stainless steel, chrome-moly steel, other castable alloys
CONTROL VLVES KOSO HMMEL DHL B U L L E T I N V 5 0 / 5 0 - FETURES Globe bodies for in-line service; angle bodies for difficult service. Each body style accepts all standard trim sets. Balanced plugs for
08.20 VIC -300 MasterSeal Butterfly Valves
CRBON STEEL PIPE - GROOVED VLVES Vic -300 MasterSeal butterfly valves are designed for pressures ranging from full vacuum to 300 psi/2065 kpa and for bi-directional, dead end services to full working pressure.
D I V I S I O N O F M A R S H B E L L O F R A M
PH Regulator Large Capacity Working Media Include ir, Steam and Liquids ll Vents are Tapped The PH is a direct operating pressure reducing regulator with large capacity. Ideally suited for uses in oil
3-Way Linked Globe Valve Assemblies with Linear Series Actuators
Linked Globe Valve ssemblies with Linear Series ctuators Note: hoose a valve assembly having a close-off pressure capability sufficient for the application. Not all valve body and actuator combinations
MADE IN THE USA BACKFLOW PREVENTERS
MADE IN THE USA BACKFLOW PREVENTERS TABLE OF CONTENTS Selection Guide........................................................................3 Double Check Valve (Series 40-100)......................................................4,5
VB-7000 Series 1/2 to 2 Globe Valves
V-7000 Series 1/2 to 2 Globe Valves with MG350V Series SmartX ctuators schneider-electric.com 1 Product Description Schneider Electric MG350V non-spring actuators and V-7000 series two and three-way globe
P95H Regulator Applications P95H Part Matrix Specifi cations Materials of Construction P95H Flow Coeffi cients Wide Open Coeffi cients
PH Regulator Large Capacity Working Media Include ir, Steam and Liquids ll Vents are Tapped The PH is a direct operating pressure reducing regulator with large capacity. Ideally suited for uses in oil
BACKFLOW PREVENTERS DUAL-CHECK BACKFLOW PREVENTER WITH ATMOSPHERIC VENT T/S-459 Certified to ASSE Standard 1012
CKFLOW PREVENTERS DUL-CHECK CKFLOW PREVENTER WITH TMOSPHERIC VENT T/S-459 Certified to SSE Standard 1012 Certified to CS Standard 64.3 Forged brass construction Threaded or sweat true union end connections
V1C Series. Pneumatic Control Valves V1C Series Cage-Guided Control Valves. Cage-Guided Control Valve. Features
V1C Series Cage-Guided Control Valve The V1C cage-guided balanced trim control valve offers high pressures and tight shutoff with the use of standard spring/diaphragm actuators. The balanced cage trim
SPIRA-TROL. ½" to 4" ASME (ANSI) Two-port KEA, KFA and KLA Control Valves
Page 1 of 11 MNGMNT SYSTMS TI-P375-1 Issue 3 SPIR-TROL ISO 91 ½" to 4" SM (NSI) Two-port K, KF and KL ontrol Valves ert. No. LRQ 9638 Description SPIR-TROL is a range of two-port single seat globe valves
DARTMOUTH COLLEGE DESIGN January 3, 2012 & CONSTRUCTION GUIDELINES
SECTION 15100 VALVES PART 1 DESIGN DIRECTIVE 1.1 SUMMARY A. This Section includes general duty valves common to most mechanical piping systems, special duty valves are specified in individual piping system
RESILIENT SEATED BUTTERFLY VALVES. Howell Valve & Automation. Toll Free: Howellvalve.com
RESILIENT SEATED BUTTERFLY VALVES Howell Valve & Automation Toll Free: 1-888-469-3557 Howellvalve.com TABLE OF CONTENTS Description Page Index 2 Resilient Standard Features 3 ST Boot Series with BUNA-N
Plumbing. Controls, Drains, Piping, Flanges, Couplings, Caps and Plugs
Plumbing Hale offers a wide variety of plumbing components to make the pump installation and operation easier for the OEM and End User. Hale controls allow for a clean and compact pump panel. Controls
See Water Pressure Reducing Valves Catalog (PHBRWPRV) for more detailed information about the products in this section.
See Catalog (PHBRWPRV) for more detailed information about the products in this section. Water pressure reducing valves PR (36LF) Series Residential and commercial applications The Apollo 36LF pressure
See Water Pressure Reducing Valves Catalog (PHBRWPRV) for more detailed information about the products in this section.
See Catalog (PHBRWPRV) for more detailed information about the products in this section. WATER PRESSURE REDUCING VALVES PR (36LF) SERIES RESIDENTIAL AND COMMERCIAL APPLICATIONS The Apollo 36LF pressure
KEY FEATURES. Product Overview. Product Line Drawing
Main Valves Options Model 106-C 106-PG-C Globe KEY FETURES Solves high pressure drop problems Controls variable flows & vibration Significantly reduces noise Self-contained actuators not required Customizable
Model descriptions. Technical data. Pressure and Temperature Limits Models 19, 20, 20P: -60 to 406 F Models 19M, 20M, 20MP:
VALVES & CONTROLS KUNKLE SAFETY AND RELIEF PRODUCTS Non-code Bronze Liquid Relief Valves Model descriptions Model 20 Model 19: All bronze, equipped with handwheel for easy adjustment within spring ranges.
Flowrite 599 Series Two-Way Valves, 1/2 to 2- inch Bronze Body, ANSI 250
Flowrite 599 Series Two-Way Valves, 1/2 to 2- inch Bronze Body, ANSI 250 Technical Instructions Document No. 155-184P25 VF 599-3 Description The Flowrite 599 Series two-way valves are designed to work
Flowrite VF 599 Series Two-Way Valves 2-1/2 to 6-inch Flanged Iron Body
Flowrite VF 599 Series Two-Way Valves 2-1/2 to 6-inch Flanged Iron Body VF 599-1 Description Features Application The Flowrite VF 599 series two-way valves are designed to work with either a pneumatic
Flowrite VF 599 Series Two-Way Valves 2-1/2 to 6-inch Flanged Iron Body
Flowrite VF 599 Series Two-Way Valves 2-1/2 to 6-inch Flanged Iron Body VF 599-1 VF114R1 VF115R1 Description Features Application The Flowrite VF 599 series two-way valves are designed to work with either
Hydra Series Choke Valve **Patent Pending
Hydra Series Choke Valve product of GI Industries Hydroplex Choke Valve Hydroplex chokes are Multiple Orifice Valves (MOV) specifically designed to control high pressure liquids and gases while providing
CALEFFI. Differential pressure by-pass valve. 519 series 01007/14 NA. Replaces 01007/12 NA
ifferential pressure by-pass valve RIT LFFI series / N ISO FM ISO No. Replaces / N Function The differential pressure by-pass valve is used in systems with a fixed speed circulating pump supplying several
We Are the Worldwide Provider for All Your Valve and Fitting Needs
Product Catalog We Are the Worldwide Provider for All Your Valve and Fitting Needs C&C Industries strives to earn your business by offering an extensive line of high quality products with a proven track
VBGx-xx-xx Externally Threaded Control Ball Valves PN25 (DN40 TO DN50)
VGx-xx-xx Externally Threaded Control all Valves PN25 ( TO DN50) PPLICTION The VG2 2-Way and VG3 3-Way Control all Valves control hot and chilled water with glycol solutions up to 50% according to VDI2035
2-WAY AND 3-WAY MOTORIZED VALVES FOR STEAM, VACUUM AND HOT WATER APPLICATIONS
R O R P O R T I O N -WY ND 3-WY MOTORIZED VLVES FOR STEM, VUUM ND HOT WTER PPLITIONS VLVE ND TUTOR FETURES Valve Sizes range from ½ inch to 8 inches -Way and 3-Way Single Seated and -Way Double Seated
08.08 Vic-Check Valves
The check valves are a product of computer-assisted innovative engineering with quality features including a new hydrodynamically efficient profile. The Vic-Check valve utilizes a spring-assisted, single-disc
STC Manual & Actuated Process Valves
STC Manual & Actuated Process Valves Fine Quality Precision Engineered Excellent Prices Advanced Design connects fluid power to industrial automation Table of Contents STC Valve Numbering System.......2
Hydronic Specialties AFLB Series Specifications Automatic Pressure Independent Flow Limiter w/ Ball Valve
FL Series Specifications utomatic Pressure Independent Flow Limiter w/ all Valve : FL - - High : FL - High - Low : FL - High - 2" U.S. Patent No. 8,061,195 PRODUT DESRIPTION: The FL is an utomatic Pressure
Pressure relief controller AVA (PN 25)
Data sheet Pressure relief controller AVA (PN 25) Description AVA is a self-acting pressure relief controller primarily for use in district heating systems. The controller is normally closed and opens
Butterfly Valves. Quality Valves at Low Cost
utterfly Valves Quality Valves at ow Cost bout Us The Flow+ product le is built around the goal of providg quality valves at competitive prices. It s a goal that has met the needs of various oil and gas,
We Are the Worldwide Provider for All Your Valve and Fitting Needs
Product Catalog We Are the Worldwide Provider for All Your Valve and Fitting Needs C&C strives to earn your business by offering an extensive line of high quality products with a proven track record for
SECTION VALVES
PART 1 GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions Specification Sections, apply to this Section. B. Related Sections:
UNIVERSITY SERVICES ANNEX James Madison University Harrisonburg, Virginia State Project Code: Architect s Project Number:
SECTION 230523 GENERAL DUTY VALVES FOR HVAC PIPING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Provisions of the Contract and of the Contract Documents apply to this Section. 1.2 DEFINITIONS A. The following
Flowrite 599 Series Two-Way Valves 1/2 to 2-inch Bronze Body
Flowrite 599 Series Two-Way Valves 1/2 to 2-inch Bronze Body Document No. 155-184P25 VF 599-3 Description The Flowrite 599 Series two-way valves are designed to work with either a pneumatic or electronic
MK Series High Performance Butterfly Submittal/Technical Data
MK Series igh Performance utterfly Submittal/Technical ata ray MK Series igh Performance utterfly Valves NSI lass 150 and 300 ray ontrols ommercial ivision 13788 West Road, Suite 200 ouston, Texas 77041
BBV Automatic or Manually Actuated Boiler Blowdown Valves DN15 to DN65
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development improvement of the product, we reserve the right to change the specification without
Pressure Relief Valves. 1541/1543 Series. Consolidated Safety Valve
Pressure Relief Valves 1541/1543 Series Consolidated Safety Valve Table of Contents Conversion Table 1541/1543.2 Features & Benefits 1541/1543.3 Applications 1541/1543.3 Scope of Design 1541/1543.4 Materials
Bid # Plumbing Supplies RESULTS
BOARD APPROVED Bid # 15-4 - Plumbing Supplies Page 1 of 16 Grant Plumbing North Brunswick NJ PVC PIPE, SCHEDULE 40 1 1-1/4" PVC Pipe, SCH 40, 20' feet 60 $0.598 $35.88 2 1-1/2" PVC Pipe, SCH 40, 20' feet
Cable & Wire Management
Cable & ire Management ay-in ireway Data Sheet Cable & ire Management pplication ouses runs of control and power cable Protects against circulating dust, falling dirt and dripping noncorrosive liquids
3. Installation and Commissioning 4. Maintenance 5. Spares
INSTLLTION ND MINTENNCE INSTRUCTIONS IM-P305-06 US November 2003 1/2" to 4" (DN15 to DN100) KE41, 43, 61, 63, 71 and 73 NSI Control Valves 1. Safety 2. Technical details 3. Installation and Commissioning
Powers Controls Powertop Two-Way Valves Normally Open
Powers Controls Powertop Two-Way s Normally Open VP 658-5 Description The VP 658 normally open valves are pneumatically operated valves designed to control the flow of both water and steam. Features Stainless
LTG3 Globe Control Valves Standard Trim
A Long Experience in Energy Equipment and one Goal: The Customer s Satisfaction. LTG3 Globe Control Valves Standard Trim Doc. num. G03STT rev.1 TABLE OF CONTENTS LTG3 - LTG3 LN - LTG3 DS : GENERAL FEATURES...
Technical Data Sheet SEVO 1230 Clean Agent Cylinders
SEVO 1230 Clean Agent Cylinders 140057, 140069, 140079, 140107, 14817, 14813 U lizing 3M TM Novec TM 1230 Fire Protec on Fluid The agent storage cylinder is a steel pressure vessel manufactured, tested
ATT Series Adjustable PIC Valves 2 Way 1/2-1-1/2 ATT - AutoTouch Terminal
½ -1½ - Pressure Independent ontrol Valve - Modulating control valve, dynamic balancing valve and differential pressure control valve in one body. Field adjustable, self-balancing, dynamic flow control
CALEFFI. Solar pump stations 01166/14 NA. 278 and 279 series 01264/16 NA
Solar pump stations 78 and 79 series 0/4 N CLEFFI 04/ N CCREDITED ISO 900 FM 4 ISO 900 No. 000 Function Solar pump stations are used on the primary circuit of solar thermal water heating systems to control
Flowrite 599 Series Three-Way Valves 1/2 to 2-inch Bronze Body
Flowrite 599 Series Three-Way Valves 1/2 to 2-inch Bronze Body Document No. 155-185P25 VF 599-4 Description The Flowrite VF 599 Series ANSI Class 250 three-way valves are designed to work with either a
KUNKLE MODELS 19/19M/20/20M/20P/20MP/200A/200H LIQUID RELIEF VALVES SAFETY AND RELIEF PRODUCTS
Extra-heavy rugged construction non-code bronze liquid relief valves with a variety of model options to meet specific applications FEATURES Inlet and outlet connections cast integral with body for easy
PROCESS & AUTOMATED VALVES
Process & utomated Valves HYDC s line of Process and utomated Valves complements our isolation valve knowhow and ability to supply high quality solutions to your valve requirements. 3-1 HV Series Inline
3 & 4-Way Rotary Valves
Applications: 3-way Valve 4-way Valve The ESBE 3 and 4-Way rotary valves type F are designed for mixing or diverting applications on heating and cooling systems. The valves are capable of controlling and
Valve Solutions Series 150/160 and V-100 Valves
w w w. m k s i n s t. c o m Valve Solutions Series 1/160 and V- Valves High vacuum bellows sealed valves Features and enefits hoice of manual, pneumatic or electropneumatic actuation ngle and Inline body
910 Series Compact Control Valve
910 Series Compact Control Valve iaphragm ctuated CONTROL VLVES ctuator 7", 9", & 12" ctuator Sizes Heavy uty ie CastHousing 1/2" 6" Valve Sizes The Trerice 910 Series Pneumatic Control Valve offers high
Victaulic Discharge CBV Vibration Isolation Pump Drop Series 383/383G
Victaulic Discharge CBV Vibration Isolation Pump Drop Series /G 2..0 PRODUCT DESCRIPTION Available Sizes 2"/ - 00 Offered in full or reduced port size (see Section.0 for details). Maimum Working Pressure
Suction Diffusers. Applications PROTECTION PUMP. Pressures to 790 PSIG Temperatures to 800ºF FEATURES MATERIALS END CONNECTIONS SIZE RANGES RATINGS
Applications Process Industry Metals and Mining Power Industry Water and Waste Chemical Industry Pulp and Paper Oil and Gas Suction Diffusers Pressures to 790 PSIG Temperatures to 800ºF FEATURES Filtration
M21Ti ISO Reduced Bore Ball Valve for the Tobacco Industry DN15 to DN150 Flanged PN40
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
W94. Specifications. Protection: Models Temperature Range Capillary Length Sensing Bulb Valve Body Selection
Temperature Model W91 (No Indicating Dial) W94 (Temperature Indicating Dial) Service Water, Steam, Other Liquids Sizes 1/2 4 onnections Threaded, Union Ends, 125# FLG 250# FLG (optional) ody Material 1/2
ACCESSORIES & FITTINGS 800 SERIES CONTROL VALVES
ACCESSORIES & FITTINGS 800 SERIES CONTROL VALVES 8 VALVE FITTING PART NUMBERS 2" & 3" PRESSURE REDUCING VALVES* 10645 8970-002 (9526-006) 1/4" tube (9526-006) Flow 8970-001 (9526-001) 8970-010 (9526-010)
Flowrite VF 599 Series Two-Way Valves 2-1/2 to 6-inch Flanged Iron Body
Flowrite VF 599 Series Two-Way Valves 2-1/2 to 6-inch Flanged Iron Body VF 599-1 Description Features Application The Flowrite VF 599 series two-way valves are designed to work with either a pneumatic
Aloyco. Corrosion Resistant Valves. The First Name In Corrosion Resistant Valves
loyco Corrosion Resistant s The First Name In Corrosion Resistant s Stainless Steel s General Index Figure No. Type Pressure Class End Connection Material vailable Size Range Catalog Page 0 Gate, RS 00
SECTION GENERAL-DUTY VALVES FOR HVAC PIPING. A. Contents of Division 23, HVAC and Division 01, General Requirements apply to this Section.
SECTION 23 05 23 PART 1 - GENERAL 1.1 SUMMARY A. Work Included: 1. Gate Valves 2. Balancing Valves 3. Ball Valves 4. Butterfly Valves 5. Swing Check Valves 1.2 RELATED SECTIONS A. Contents of Division
Backflow Preventers TABLE OF CONTENTS
backflow preventers TABLE OF CONTENTS Selection Guide........................................................................3 Double Check Valve (Series 40-100).....................................................4,5
ilent Silent Operation Proven Performance Cost Effective Silent Check Valves Check Valve
ulletin / Silent Operation Proven Performance Cost Effective ilent Check Silent Check s www.valmatic.com Certified Lead-Free NSF/NSI & 7 Certified Feature Highlights Threaded C F C Globe F C E Wafer F
Brown University Revised August 3, 2012 Facilities Design & Construction Standards SECTION HVAC&R VALVES
SECTION 23 05 23 HVAC&R VALVES PART 1 - GENERAL 1.1 SUMMARY: A. Section includes valves for building services piping. 1.2 GENERAL VALVE APPLICATION REQUIREMENTS: A. Provide valve handle extensions that
DCAP Series 40-4 X X - X X X. Dual Check w/ Atmospheric Port Backflow Preventers
Dual Check w/ Atmospheric Port DCAP Series DUAL CHECK WITH ATMOSPHERIC PORT BACKFLOW PREVENTER The Apollo DCAP Series Backflow Preventer is designed to protect residential and commercial water supply lines
Pressure Independent Control Valve AB QM, ½ thru 2 2½ thru 4 5 thru 10 Valve Size
Features and Benefits Danfoss 2016.04 The AB QM temperature control valve provides pressure independent regulation of flow while also providing flow limiting system balance. The valve internally contains
SECTION GENERAL-DUTY VALVES FOR HVAC. A. Section includes valves for building services piping.
SECTION 23 05 23 GENERAL-DUTY VALVES FOR HVAC PART 1 - GENERAL 1.1 SUMMARY A. Section includes valves for building services piping. 1.2 REFERENCES A. AGA Z21.22 (American Gas Association) - Relief Valves
Temperature controller (PN 25) AVT / VG - external thread AVT / VGF - flange
Data sheet Temperature controller (PN 25) AVT / VG - external thread AVT / VGF - flange Description AVT / VG The AVT / VG(F) controller is a self-acting proportional temperature controller developed primarily
* T Temperature-Indicating Dial (Must be field set and calibrated to an actual thermometer)
175/153 Series Watson McDaniel reserves the right to change the designs and/or materials of its products without notice. 2006 Watson McDaniel Company 175 HEATING 153 COOLING 175 / 153 Screwed Connection
SECTION GENERAL-DUTY VALVES FOR PLUMBING PIPING
PART 1 - GENERAL 1.1 DESCRIPTION OF WORK A. Provide labor, materials, equipment, and services necessary to install valves required to complete the work indicated on drawings. B. ASME Compliance: 1. ASME
ISO 9001 : Full Port Check Valves. Male NPT, Plain & Grooved End Lowest Pressure Drop. Maximizing the Flow
ISO 9001 : 2008 Full Port heck Valves Male NPT, Plain & Grooved End Lowest Pressure Drop Maximizing the Flow Full Port Lowest Pressure Drop Quick Delivery Full Port, Lowest Pressure Drop Full Port heck
Flowrite VF 599 Series Three-Way Valves 1/2 to 2-inch Bronze Body
PRODUCT NO. MODEL LANDIS & STAEFA ASSEMBLED IN U.S.A. Flowrite VF 599 Series Three-Way Valves 1/2 to 2-inch Bronze Body Document No. 155-185P25 VF 599-4 Cv VF186R1 Description The Flowrite VF 599 Series
SECTION GENERAL-DUTY VALVES FOR PLUMBING PIPING
SECTION 220523 - GENERAL-DUTY VALVES FOR PLUMBING PIPING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division
SOLENOID CONTROL VALVE
PROJECT NAME LOCATION SOLENOID CONTROL VALVE INTRODUCTION This specification covers the design, manufacture, and testing of 4 in. (100 mm) through 36 in. (900 mm) Control Valves PART 1 - GENERAL 1. Standard
Henderson Engineers, Inc. SECTION GENERAL DUTY VALVES FOR PLUMBING PIPING PART 1 - GENERAL REQUIREMENTS
SECTION 220523 - GENERAL DUTY VALVES FOR PLUMBING PIPING PART 1 - GENERAL REQUIREMENTS 1.1 SUMMARY A. This Section includes general duty valves common to most plumbing piping systems. 1. Special purpose
P627 High Flow Gas Regulator
P627 High Flow Gas Regulator Wide of Flow Capacities Durable Powder Coated Exterior Installation Versatility NACE Construction Available The P627 is a spring loaded, direct-operated regulator for both
Sliding Seal & Brass Poppet Valves
Sliding Seal & rass Poppet Valves anually Operated Section PL / VL Series... 2-3 HV Valve... 4-5 Hand Operated Valves,... 6-7 utton Operated Valves...8 Hand / Cam utton Valves...9 leed Valve...10 old text
Temperature controller for heating (PN 25) AVT / VG - external thread AVT / VGF - flange
Data sheet Temperature controller for heating (PN 25) AVT / VG - external thread AVT / VGF - flange Description AVT / VG AVT / VGF The AVT / VG(F) controller is a self-acting proportional temperature controller