Hydronic Specialties AFLB Series Specifications Automatic Pressure Independent Flow Limiter w/ Ball Valve
|
|
|
- Herbert Patrick
- 5 years ago
- Views:
Transcription
1 FL Series Specifications utomatic Pressure Independent Flow Limiter w/ all Valve : FL - - High : FL - High - Low : FL - High - 2" U.S. Patent No. 8,061,195 PRODUT DESRIPTION: The FL is an utomatic Pressure Independent Flow Limiting device, male ended by union with a brass ball valve attached, rated at 600 OG / 250 F. The FL is supplied with a stainless steel flow limiting cartridge that can be removed for cartridge exchange, if necessary. The FL comes standard with two pressure/temperature ports and a hanging identification tag. The ball valve end, or run-out side, is available in FNPT or ST. The union side connections available include MNPT, FNPT, ST, and a variety of reductions. ody O-Ring Tail Piece, Packing Nut Union Nut Flow artridge Diaphragm Spring PT Port all Valve Stem all all Seat, Packing Gland Handle Valve Size - L H - L H - 2" STNDRD MTERIL SPEIFITIONS Forged rass STM or ast rass STM EPDM rass STM , , or rass STM 455 STM 582 Type 303 Stainless Steel EPDM 302 Stainless Steel EPDM Dual Durometer ore Forged rass STM rass STM low-out Proof hrome Plated rass Teflon hrome Plated Steel w/ Vinyl over FLO RTES (GPM) * ONTROL RNGE PSID D E F G H I J K L M N O P Q R S T U V X Y Z * ustom flow rates can be calibrated at the factory for an additional charge. Unless confirmed as special, flow rates will default to standard flow rate. STNDRD OPERTING SPEIFITIONS ontrol Range: ccuracy: ±5% Max orking Pressure: 2 psi psi 600 OG / P Max Operating Temperature: 40 F to 250 F Start-Up Head Loss: 5 Feet of H 2 O Specification information is provided to assist and is given without obligation or warranty. The ompany reserves the right to make changes in design, materials, and/or specifications without notice or liability PRODUT SPEIFITIONS: The utomatic Flow Limiter with all Valve (FL) shall have flow measurement capability The FL shall have a static orifice to control flow The FL artridge shall be permanently marked with the letter that corresponds to the factory preset GPM ll flow cartridge wear surfaces shall be stainless steel The FL shall have a 2 PSID start up rating The FL artridge shall have a large operational differential range The FL artridge shall provide continual flow at differential pressures above design limits The FL artridge shall be removable for cleaning or exchange if required PRO Hydronic, L.L State Highway 64 est Form Number: SUFL1 Revision 6-8/2016
2 FL Series Dimensions utomatic Pressure Independent Flow Limiter w/ all Valve : FL - - High H P1 P2 FLO LL VLVE SIZE ND TYPE ST FPT ST 6.4 FPT 6.0 ST 7.3 FPT 6.5 TIL PIEE EIGHT H P1 P Note: Dimensions listed above do not include ProPress or any other special fittings or adapters. ll dimensions, weights, and materials are subject to minor variations. onsult with factory for confirmation of dimensions and material specifications. Sweat size listed is nominal and will differ from the actual, measurable size PRO Hydronic, L.L State Highway 64 est Form Number: SUFL2 Revision 3-5/2013
3 FL Series Dimensions utomatic Pressure Independent Flow Limiter w/ all Valve : FL - High - Low H P1 P2 FLO LL VLVE SIZE ND TYPE ST FPT ST 8.7 FPT 8.0 ST 11.6 FPT 10.6 TIL PIEE EIGHT H P1 P Note: Dimensions listed above do not include ProPress or any other special fittings or adapters. ll dimensions, weights, and materials are subject to minor variations. onsult with factory for confirmation of dimensions and material specifications. Sweat size listed is nominal and will differ from the actual, measurable size PRO Hydronic, L.L State Highway 64 est Form Number: SUFL3 Revision 3-3/2015
4 FL Series Dimensions utomatic Pressure Independent Flow Limiter w/ all Valve : FL - High - 2" H2 H1 FLO LL VLVE SIZE ND TYPE ST 10.6 TIL PIEE 1 1 EIGHT FPT " ST " " FPT " H1 4.0 H Note: Dimensions listed above do not include ProPress or any other special fittings or adapters. ll dimensions, weights, and materials are subject to minor variations. onsult with factory for confirmation of dimensions and material specifications. Sweat size listed is nominal and will differ from the actual, measurable size. P P PRO Hydronic, L.L State Highway 64 est Form Number: SUFL4 Revision 4-3/2015
5 FL Series Submittal utomatic Pressure Independent Flow Limiter w/ all Valve : FL - - High : FL - High - Low : FL - High - 2" U.S. Patent No. 8,061,195 FLO FL - X - X - X - X - X - X - XX, MODEL DESIGNTION VLVE SIZE FIXED END LINE SIZE FIXED END ONNETION TIL PIEE SIZE TIL PIEE ONNETION FLO RTE ODE OPTIONS separate w/ comma FL - utomatic Flow Limiter w/ all Valve " F PT S T " F PT S T M PT Use chart below for code or specify special rate. XH - Extended Handle XP - Extended PT FM-FlowMeasurement Valve Size - L H - L H - 2" FLO RTE ODES (GPM)* D E F G H I J K L M N O P Q R S T U V X Y Z * ustom flow rates can be calibrated at the factory for an additional charge. Unless confirmed as special, flow rates will default to standard flow rate. JO NME: REPRESENTTIVE: ONTROL RNGE PSID ENGINEER: REF/PO#: DTE: ONTRTOR: SUMITTED Y: DTE: PRT # (See table above) TGGING/JO INFORMTION GPM QUNTITY PRO Hydronic, L.L State Highway 64 est Form Number: SUFL5 Revision 4-8/2016
CONN in mm in mm in mm SIZE lbs kg PX " /4"
ccessories 1 PV MNUL IR VENT PRESSURE / TEMPERTURE ombination Manual ir Vent and Pressure/Temperature Test Port with brass body, dual durometer EPDM core, blowout-proof stem, side discharge vent with 1/8
ATT Series Adjustable PIC Valves 2 Way 1/2-1-1/2 ATT - AutoTouch Terminal
½ -1½ - Pressure Independent ontrol Valve - Modulating control valve, dynamic balancing valve and differential pressure control valve in one body. Field adjustable, self-balancing, dynamic flow control
CALEFFI. FLOWCAL Automatic flow balancing valve with polymer cartridge. 121 series 01141/11 NA. Function
FLOWCAL Automatic flow balancing valve with polymer cartridge 121 series REGISTERED BSI EN ISO 9001:2000 Cert. n FM 21654 UNI EN ISO 9001:2000 Cert. n 0003 CALEFFI 01141/11 NA Function The FlowCal automatic
HVAC. Products. TRI A FLO Automatic Cartridges PAGE 2. TRI Y FLO Strainer PAGE 3. TRI U FLO Accessory Union PAGE 4. CB Series Butterfly/Venturi PAGE 5
HVAC TRI A FLO Automatic Cartridges TRI Y FLO Strainer TRI U FLO Accessory Union Products Automatic balancing valves.5 thru 108.0 in Brass, Stainless, PVC, CPVC, Titanium, Ceramic, Monel, and more PAGE
PIC-V Valve... 1 Unimizer (1/2 to 3 )... 2 Unimizer (4 to 6 )... 3 Automizer... 4 MVP Valve... 5
PERFORMANCE SPECIFICATIONS PIC-V Valve... 1 Unimizer (1/2 to 3 )... 2 Unimizer (4 to 6 )... 3 Automizer... 4 MVP Valve... 5 PIC-V Valve 1. PRESSURE INDEPENDENT ACTUATED BALL VALVES AND CARTRIDGE (PIC-V)
MALE X FEMALE LARGE-PORT BALL VALVE T-900 M x F and T-900 M x F-T
MLE X FEMLE LRGE-PORT LL VLVE T-900 M x F and T-900 M x F-T urable forged brass construction Space-saving male-by-female end connections are ideal for confined piping installations T-handle equipped models
PP1 Series Piping Packages for VG1000 Series Ball Valves
PP Series Piping Packages for VG000 Series Ball s Product Bulletin PP2xxxxx- Series, PP8xxxxx- Series Code No. LIT-20974 Issued August, 204 PP Series Piping Packages are designed to provide an easier way
Innovation + Quality. Valves, controls + systems Balancing and Control Valves
Innovation + Quality Valves, controls + systems Balancing and Control Valves Cocon Q Pressure independent control valve Product specification Size: L1 L2 H1 H2 ½, ½ LF 2.75 3.9 2.0 1.9 ¾ LF 2.9 4.2 2.0
Automizer Combination Control Valves
Combination Control Valves Recommended Applications Where actuated valves and balancing valves are used to control the flow For VAV boxes, fan coil units and terminal boxes Where space is tight Absolute
Series TSB7 Ball Valve
Series TS7 all Valve leanflow TM TS7 all Valves are engineered to be a true process piping component to specifically meet the demanding processes found in the pharmaceutical and food & beverage industries.
Innovation + Quality. Valves, controls + systems Balancing and Control Valves
Innovation + Quality Valves, controls + systems Balancing and Control Valves Balancing and Control Valves Catalog Hydrocontrol Static Balancing Valves Recomended flow rate chart 4 Hydrocontrol VTR Static
9907T Straight DZR Brass Automatic Balancing Valve
Feature DZR brass automatic balancing valve regulated by interchangeable cartridge (see cartridge section) Union ends for tailpieces connections FPT, MPT, Solder and Press tailpieces available 300WOG Working
THERMOSTATIC CONTROL HEADS:
Thermostatic radiator valves for towel warmer style radiators 338 33, 00 series REDITED LEFFI 0009/3 N ISO 900 FM 6 ISO 900 No. 0003 Function onvertible radiator valves are typically used in North merica
FEATURES. 3 position models can be equipped with special 180 operators offering two 90 steps.
2" 8" (DN 50 200) OTTOM PORTED 3-WY FLNGED LL VLVES Jamesbury bottom ported 3-way ball valves provide a variety of flow paths not commonly found in other 3-way designs.the basic design is suitable for
Hose Length Custom Length Supply Line Options Ball Valve w/ PT UBY Strainer w/ PT and BDV
Model AC Circuit Sentry Automatic Balance Hose Kits - Submittal Hose Kit Size Flow Range *MFR Qty. 1/2".33-14 5 3/4".33-14 11 3/4" 5-50 11 1".33-14 20 1" 5-50 20 1-1/4" 5-50 30 **1-1/2" 5-50 44 **1-1/2"
CALEFFI. Differential pressure by-pass valve. 519 series 01007/14 NA. Replaces 01007/12 NA
ifferential pressure by-pass valve RIT LFFI series / N ISO FM ISO No. Replaces / N Function The differential pressure by-pass valve is used in systems with a fixed speed circulating pump supplying several
KTM MODEL NB / MB THREE-WAY BALL VALVES 2-SEATS (L-PORT) AND 4-SEATS (L AND T-PORT)
KTM MODEL N / M THREE-WY LL VLVES 2-SETS (L-PORT) ND 4-SETS (L ND T-PORT) single KTM 3-way ball valve replaces several 2-way valves, saving valuable space and simplifying piping FETURES Positive alignment
Modulating Water Valves and Bulb Wells
Modulating Water Valves and ulb Wells PPLITION: These modulating valves regulate the flow of water to the heat exchanger to maintain a desired exiting oil temperature. They open automatically when temperature
HVAC Automatic Balance Valve Index
HVC utomatic alance Index Weights Individual Weights Y-all Models Flow Rate (GPM) Connection Size Page 2519 0.50-5.00 1/4 to 3/4 V-SPEC-2519 2518 0.50-5.00 1/2 to 3/4 V-SPEC-2518 2517 0.50-9.00 1/2 to
VB-7000 Series. Selection Guide. Applications. Applicable Literature. Selection Guide Contents
V-7000 Series Selection Guide T V-7000 Series 1/2 to 2 Globe Vlves with Fort M400, M800, nd M1500 ctutors pplictions T Fort M400, M800, nd M1500 series liner ctutors mount directly 1 onto 1/2 to 2 V-7xxx
CALEFFI. Diverter and isolation valves for panel radiators. 3010, 3011, 3012, 3013 series 01036/12 NA. Function. Product range
iverter and isolation valves for panel radiators 00, 0, 02, 0 series RIT LI 006/2 N ISO 900 M 2654 ISO 900 No. 000 unction aleffi 0 series valves are installed on panel style radiators. They are connected
MANUAL VALVES AND LOCKSHIELD VALVES FOR RADIATORS
ST.07.03.00 MNUL VLVES ND LOKSHIELD VLVES FOR RDITORS 1. DESRIPTION FR valves and lockshield valves are designed for use on heating and cooling systems. VLVE: the component which permits adjustment or
BACKFLOW PREVENTERS DUAL-CHECK BACKFLOW PREVENTER WITH ATMOSPHERIC VENT T/S-459 Certified to ASSE Standard 1012
CKFLOW PREVENTERS DUL-CHECK CKFLOW PREVENTER WITH TMOSPHERIC VENT T/S-459 Certified to SSE Standard 1012 Certified to CS Standard 64.3 Forged brass construction Threaded or sweat true union end connections
IsoTherm FlowGuards Mini Ball Valves Gauges Aquastats Unions
82 IsoTherm FlowGuards Mini Ball Valves Gauges Aquastats Unions 83 Adjustment knob (sets supply temperature) Mixing Valve 1 Male BSP Threads Mixing Point Supply Inlet from Boiler Temperature Gauge (indicates
Table of Contents. Automatic Section A B V. Coil Piping Packages A B P P. Water Source Heat Pump Hose Kits A B H K
Table of Contents Automatic Section Automatic Balance Valves Installation Operation Maintenance Instructions / Warranty Technical Information How To Order Coil Piping Packages Package Types How To Order
CALEFFI. zone valves. Z series 01115/14 NA. Replaces 01115/11 NA. Function
Z series zone valves Function REGI STERE S EN ISO 900:000 ert. n FM 64 UNI LEFFI 0/4 N Replaces 0/ N Z-one valves are used to automatically shut-off the flow or redirect hot and chilled water in hydronic
Cipriani Harrison Valves Corp.
pplication Sanitary ball valves are used in stainless steel piping systems for isolation, either manually or automatically operated. The full port design with zero flow restriction makes it an optimum
DARTMOUTH COLLEGE DESIGN January 3, 2012 & CONSTRUCTION GUIDELINES
SECTION 15100 VALVES PART 1 DESIGN DIRECTIVE 1.1 SUMMARY A. This Section includes general duty valves common to most mechanical piping systems, special duty valves are specified in individual piping system
Ball Valves. Full Port Ball Valves - Compression w/ Drain Cap - Forged Brass. Full Port Mini Ball Valve - Forged Brass 05/06/15
05/06/15 G8 Full Port - Compression w/ Drain Cap - Forged Brass Rated for cold water, oil & gas Blow-out proof stem Temperature Range: -30 to 150C (-22 to 302F) Working Pressure: 600 psi Blue handle Lead-Free
FLOATING BALL VALVE CATALOG
FLOTING LL VLVE TLOG www.walworthvalves.com INEX INTROUTION WLWORTH ENGINEERING ONTROL... 5 WLWORTH QULITY SYSTEM... 5 QULITY ONTROL EQUIPMENT... 9 FLOTING LL VLVES INTROUTION OF FLOTING LL VLVES...11
KNX Series - SV (integral ball valve STrainer) HVAC Hook-up Kits
VALVES & AESSORIES KNX Series - (integral ball valve STrainer) HVA Hook-up Kits Gruvlok KNX Series Hook-up Kits integrate the components required to connect piping to hydronic heating system or chiller
General Purpose Ball Valves CERTIFIED TO ISO 9002 QUALITY STANDARDS
General Purpose all Valves RTIFID TO ISO 92 QULITY STNDRDS VOP- ON-PI RDUD PORT GNRL PURPOS LL VLV 4 2 (8 mm) RON OR STINLSS STL ODY, RPTF STS FIGUR NUMR RON = S-L2-SSG F8M = S-L-SSG STNDRD MTRILS PRT
Pneumatic Fittings & Tubing
Pneumatic Fittings & Tubing General Information Fitting escriptions Working Pressure Style Maximum Nominal onstruction pplication ompatible Tubing Poly-Flo 500 PSI 125 PSI Three-piece: body, nut Pneumatic
VB-7000 Series 1/2 to 2 Globe Valves
V-7000 Series 1/2 to 2 Globe Valves with MG350V Series SmartX ctuators schneider-electric.com 1 Product Description Schneider Electric MG350V non-spring actuators and V-7000 series two and three-way globe
INSTRUMENTATION BALL VALVES
INSTRUMENTTION LL VLVES INSTRUMENTTION LL VLVES ONSTRUTION 360 rass FETURES/ENEFITS PPLITIONS Panel pplications RNGES Vacuum Service Oxygen Service U.L. pproved for Refrigerant Service Maximum Pressure
BC SERIES CHECK VALVE
SERIES HEK VLVE Soft ubble Tight 1/2 psi racking Pressure NR Standard (Viton Optional, use Suffix V) Lead Free option, use suffix LF omplies with alifornia 1953 Max Working Pressure 1/4 thru 400 psi WOG
HIGH PERFORMANCE SEGMENTED V-BALL CONTROL VALVE
HIGH PERFORMNE SEGMENTE V-LL ONTROL VLVE GENERL INFORMTION HIGH PERFORMNE SEGMENTE V-LL ONTROL VLVE High Rangeability: 300:1 Turn down ratio Flow haracteristic: Equal Percentage Low Pressure Recovery Rate:
Air Actuated Ball Valves 3-Piece Stainless Steel, Full Port 1/4 to 3 NPT
ir ctuated all Valves 3-Piece Stainless Steel, ull Port 1/4 to 3 SERIES eatures Spring Return or ouble cting ctuators ull Port direct mount ISO5211 valve Swing-out bolted body design for easy maintenance
PRESSURE INDEPENDENT CONTROL VALVE
PRESSURE INEPENENT ONTROL VLVE T2873.1_00 EN pril 2015 PROUTION RNGE Version without pressure plugs Version with pressure plugs Size P - Pa flow rate - m 3 /h artridge colour 2873.04.50 1/2" 16 200 0,037
High Pressure Ball Valves
High Pressure Ball Valves 79 Valve Options Reliable, simple, operation for on-off service Fast acting, one quarter turn fully opens or closes the valve Maximum performance, straight through flow for minimum
3-Way Brass Ball Valves L or T Port Design, 400 PSI WOG 1/4 to 3 NPT
3-Way Brass Ball Valves L or T Port Design, 400 PSI WOG 1/4 to 3 NPT SERIES Features Standard Port 3-way L or T flow path Four seat design allows for full pressure at any port Hand lever operator Actuator
The Reliable Automatic Sprinkler Co., Inc., 103 Fairview Park Drive, Elmsford, New York Bulletin 617 Rev. C
ulletin 617 Rev. Model R ommercial Riser Riser Manifold for ommercial pplications ulletin 617 Rev. vailable Sizes/Pressure Ratings: 1 1 / 2 (40mm) and 2 (50mm) Threaded - 250 psi (17,2 bar) Working Pressure
New Product Price List LT-NP0417 Effective Date: April 3, 2017
New Product Price List LT-NP0417 Effective Date: April 3, 2017 Full Freight Allowed Order any quantity of our new valves or fittings on this sheet and receive FFA on the first order! Any Legend item may
Technical Documentation Pressure Independent Characterized Control Valves (PICCV) Patented Effective December 2007
Technical Documentation Pressure Independent Characterized Control Valves (PICCV) Patented Effective December 2007 Belimo Project: 1100 Peachtree, Atlanta, Georgia Control Valve Product Range Electronic
B1F. B Series Forged Brass Ball Valves 5.1
** Suitable for use with natural gas, manufactured gas and liquefied petroleum gases (distributed as vapour with or without the admixture of air), or mixtures thereof. Not for use on Sour Gas. Series Forged
Series AIR LINE COMPRESSED AIR DISTRIBUTION SYSTEM
Series IR LINE COMPRESSED IR DISTRIUTION SYSTEM 26 IR LINE IR DISTRIUTION SYSTEM FETURES ND ENEFITS Installation ease: IR LINE installations can be carried out easily by the end-user, eliminating the need
MODEL CB800 Circuit Balancing Valves
MOEL 00 ircuit alancing Valves VLVES & ESSORIES Model 00 ircuit alancing Valves are designed to achieve accurate and efficient balancing of hydronic heating or cooling systems. ircuit alancing Valves provide
Lab Specialty Products Technical Information TECHNICAL INFORMATION WEIGHTS & DIMENSIONS
Lab Specialty Products Technical Information TECHNICL INFORMTION WEIGHTS & DIMENSIONS Contact Spears for any Information not found. Page 569 Lab Ball s Sample Engineering Specification ll thermoplastic
W94. Specifications. Protection: Models Temperature Range Capillary Length Sensing Bulb Valve Body Selection
Temperature Model W91 (No Indicating Dial) W94 (Temperature Indicating Dial) Service Water, Steam, Other Liquids Sizes 1/2 4 onnections Threaded, Union Ends, 125# FLG 250# FLG (optional) ody Material 1/2
AN ISO 9001 : 2008 COMPANY GLOBE VALVES. Get the edge in process control. Butterfly Valves India Pvt. Ltd.
N ISO 9001 : 2008 OMPNY GLOE VLVES Get the edge in process control utterfly Valves India Pvt. Ltd. Introduction Hi-TEH Manufacturing Programme Valve Type End SME 2 2½ 3 4 5 6 8 10 12 onn. lass DESIGN STNDRD
ACCREDITED. brass EN CW617N brass EN CW614N brass EN CW614N, chrome plated PTFE PSU EPDM
alancing valve with flow meter 1 series REDITED ISO 9001 FM 1 LEFFI 0119/1 G replaces dp 0119/08 G Function The balancing valve is a hydraulic device that accurately regulates the flow rate of heating
1 DESCRIPTION 2 WORKING PRINCIPLE 2.1 REGULATION ST
PRESSURE INDEPENDENT ONTROL VLVE - P.I..V. ST.01.34.00 RT. 2136 RT. 2137 1 DESRIPTION The valves art. 2136 and 2137, better known by the acronym PIV (Pressure Independent ontrol Valve), have been designed
GTW 3-WAY CONTROL VALVE SIZES 1/2" 12" ANSI CLASS 125/250, 150/300
GTW ONTROL VLVE PPLITION DT Process control systems for food, pulp and paper, chemical, petrochemical & other industries HV systems Feed water and fuel system controls in boiler rooms Packaged systems
ISO 9001 : Full Port Check Valves. Male NPT, Plain & Grooved End Lowest Pressure Drop. Maximizing the Flow
ISO 9001 : 2008 Full Port heck Valves Male NPT, Plain & Grooved End Lowest Pressure Drop Maximizing the Flow Full Port Lowest Pressure Drop Quick Delivery Full Port, Lowest Pressure Drop Full Port heck
INSTALLATION INSTRUCTIONS FOR PISTON TYPE FLUSHOMETER EXPOSED CLOSET AND URINAL INSTALLATIONS
ode No. 0816477 Rev. 0 (04/07) Flushometers INSTLLTION INSTRUTIONS FOR PISTON TYPE FLUSHOMETER EXPOSED LOSET ND URINL INSTLLTIONS loset Flushometer for 1½" Top Spud rown II & rown 111 rown II & rown 115
132 Series. QuickSetter Balancing Valve with flow meter NA Function
NA800 www.caleffi.com QuickSetter Balancing Valve with flow meter Copyright 0 Caleffi Series Function The QuickSetter+ balancing valve accurately controls the flow rate in plumbing systems. Proper system
Terminator PICV. Technical Manual
Terminator PICV Technical Manual Table of Contents Introduction 1 Advantages and Ease of Use 1 Applications examples 2 Technical specifications Start Up Charts 6 Start Up Charts 7 Start Up Charts 8 Flow
Brass Full Port Ball Valve IPS 600 WOG 150 SWP
Brass Full Port Ball Valve IPS 600 WOG 150 SWP Material of Valve s Body Cast Brass Ball...Chrome Plated Brass Stem Packing.Teflon Stem.Brass Stem Gland Screw.Brass Handle.Zinc Plated Steel IPS BLL VLVE
CONTROL VALVES W910 Series
ONTROL ompact ontrol Valve Watson McDaniel reserves the right to change the designs and/or materials of its products without notice. 2010 Watson McDaniel ompany Models W910, W910, W910, W910T, W910EP,
966SRL 966SBL Nominal size A B C D Weight Red Lever Blue Lever in mm mm mm mm kg Product Code Product Code
D rass Full ore FIG 966SRL and 966SL WRS Valves Lockable lever as standard 966SRL 966SL Nominal size D Weight Red lue in mm mm mm mm kg Product ode Product ode 4 4.4 44.7 90 8 0.7 784204 78408 8 45.4 47.8
Safety cap. Measuring probe. Seal. Operating principle. Advantages of balanced circuits. Balanced circuits have the following principal benefits:
Balancing valve, fixed orifice 0 series CALEFFI 0/ NA ACCREDITED ISO 900 FM ISO 900 No. 000 Function Product range Caleffi 0 series low lead, manual balancing valves are used to measure and adjust the
Pressfit System for Carbon Steel Pipe
R PRESSFIT SYSTEM FOR ARBON STEEL PIPE Pressfit System for arbon Steel Pipe 12.02 VITALI IS AN ISO 9001 ERTIFIED OMPANY PRODT DESRIPTION L FM L See Victaulic publication 10.01 for details. The Pressfit
ANSUL. Vertical and Horizontal Bladder Tanks
NSUL SYSTEM OMPONENTS U.S..G. PPROVL NO. 162.033/14/0 REV. 0 UL EX-3933 7-1-94 Page 2-59 Vertical and Horizontal ladder Tanks PPLITION The nsul bladder tank is one component in a balanced pressure proportioning
2-SEATS (L-PORT) AND 4-SEATS (L AND T-PORT)
KTM Series N / M Three-way ball valves 2-SETS (L-PORT) ND 4-SETS (L ND T-PORT) single KTM 3-way ball valve replaces several 2-way valves, saving valuable space and simplifying piping Features Positive
New Fan Coil Piping Packages
New Fan Coil Piping Packages SO BUILT TOUGH, TOUGH. WE BUILT GUARANTEE TO LAST. IT. www.superiorrex.com Piping Packages Table of Contents General Notes and Legend... 3 Piping Package Code Descriptions
SECTION METERS AND GAGES FOR PLUMBING PIPING
PART 1 GENERAL 1.01 SECTION INCLUDES A. Positive displacement meters. B. Flow meters. SECTION 22 0519 METERS AND GAGES FOR C. Pressure gages and pressure gage taps. D. Thermometers and thermometer wells.
Thermocouple & RTD Accessories (Thermowells, Connectors & Fittings)
Thermocouple & RTD ccessories (Thermowells, onnectors & Fittings) TLE OF ONTENTS ESSORIES FOR THERMOOUPLE & RTD s MODEL DESRIPTION PGE P SERIES THERMOWELLS 96 X1 THERMOOUPLE EXTENSION LES 97 X2 RTD EXTENSION
7 ZONE VALVES. Applications
7 ZONE VALVES Designed to fit in compact areas where On/Off control is required. Actuator installation is a snap with an easy, one-handed removal or engagement. Actuator has a synchronous motor that winds
Wirewound Resistors, Industrial Power, Vitreous Coated, Adjustable Tubular
Wirewound Resistors, Industrial Power, Vitreous oated, djustable Tubular FETURES High temperature vitreous coating omplete welded construction Tight tolerance of 5 % for values above 1 Excellent stability
Product Guide MAS CA 08/05
Product Guide MS 8/5 www.mastewart.com ontents series ball valves -1: full/large port, 2 piece, NPT 1.1-2: full port, 2 piece, solder end 1.1-3: full port, 2 piece, NPT 1.2-4: full port, 2 piece, solder
* Optional PRESSURE COMPENSATOR - FLANGED TYPE B A X 2.2. Typical application VR5P with flow control valve
* Veljan 3 ports pressure compensator Valve are designed for improved operation safety and reduced mountg cost. These valves are used to mata a constant pressure drop External PD, External PP Internal
S, M, L, and 31 Series. Straight-pattern flow coefficients (C v ) from to Low- and high-pressure service
www.swagelok.com Metering Valves S, M, L, and Straight-pattern flow coefficients (C v ) from 0.004 to 0.16 Low- and high-pressure service Repeatable vernier handles available rass and 316 stainless steel
RPEL1-04. Functional Description HA /2014. Solenoid - Operated Directional Control Valves. Size 04 (D 02) 250 bar (3600 PSI) 30 l/min (8.
Solenoid - Operted Directionl Control Vlves RPEL-0 05/0 Size 0 (D 0) 50 r (600 PSI) 0 l/min (8.0 GPM) /-, /- nd /-wy directionl control vlves with solenoid control Solenoids cn e turned round their xis
197C. Valve Group. Series Farris Engineering Pressure Relief Valves
97 Valve Group Series 700 Farris Engineering Pressure Relief Valves Numbering System Selecting and specifying Farris pressure relief valves is simple using the numbering system that follows. Each digit
Direct/Factory Mounting Valve Set
Generated: 29th April 2018 Marflow Hydronics 1 Dimensions DN 15/20 A 243 B 137 C 115 D 3/4 Euroconus d 40 E 30.2 Generated: 29th April 2018 Marflow Hydronics 2 Product Variations NX-EVO-X-X-03 Part No:
FTV-S (Straight) & FTV-A (Angle Body) Tri-Service Valve
VLVES & ESSORIES FTV-S (Straight) & FTV- (ngle ody) SERVIE REOMMENDTIONS: The Model FTV-S & FTV- is primarily designed for installation in pump discharge piping where it functions as a spring loaded silent
FlowCon SM mm. Dynamic Self Balancing Control Valve SPECIFICATIONS
FlowCon SM 50-150mm Dynamic Self Balancing Control Valve SPECIFICATIONS Pressure rating: 4000 kpa / 580 psi Temperature rating, media: -20 C to +120 C / -4 F to +248 F Temperature rating, ambient: -10
Compact Electric Actuated Ball Valves PVC Body, Teflon/EPDM Seals 1/2 to 1 inch Pipe
Compact Electric Actuated Ball Valves PVC Body, Teflon/EPDM Seals 1/2 to 1 inch Pipe SERIES Features Industrial quality miniature actuator Industrial grade True Union ball valve Visual valve position indicator
MINIMATIC COMPACT - COMPETITIVE - FLOW CONTROL NORTHVALE KORTING LTD
MINIMTI OMPT - OMPETITIVE - FLOW ONTROL NORTHVLE KORTING LT MINIMTI ontrol Valves range of compact, lightweight, low cost control valves for use on liquid steam or gas applications. vailable in 2 way and
BRASS BALL VALVES. CSA, UL, cul CGA 9.1 and FM Approved. Female NPT, Male NPT and Flare ends in various configurations from 3/8 to 1.0.
195 Series Ball Valves BRASS BALL VALVES CSA, UL, cul CGA 9.1 and FM Approved. Female NPT, Male NPT and Flare ends in various configurations from 3/8 to 1.0. Hot forged brass body Blow-out nickel plated
Needle Valves. Needle Valves Part Matrix. Flow Coefficient (C v ) belgas.net 1
Needle Valves elgs Standard Needle Valves offer four choices in 316 stainless steel as well as one piece forged carbon plated steel; soft seat and hard seat, angle and globe styles. The Mini Valve offers
quick couplings HQC Series Instrumentation Quick Couplings Typical Applications Features & Benefits Technical Data
HQ Series Instrumentation Quick ouplings Typical pplications Laboratories University labs Gas distribution iopharmaceutical Technical Data ONSTRUTION 36 Stainless steel* NOMINL FLOW SIZES /4, 3/8, / MXIMUM
VBGx-xx-xx Externally Threaded Control Ball Valves PN25 (DN40 TO DN50)
VGx-xx-xx Externally Threaded Control all Valves PN25 ( TO DN50) PPLICTION The VG2 2-Way and VG3 3-Way Control all Valves control hot and chilled water with glycol solutions up to 50% according to VDI2035
High Pressure Ball Valves. Ball Valves
High Pressure 79 Valve Options Reliable, simple, operation for onoff service Fast acting, one quarter turn fully opens or closes the valve Maximum performance, straight through flow for minimum turbulence
Product Catalog. Precision Control DeltaPValves. guaranteed delta T 10-year warranty made in the USA
Product Catalog Precision Control DeltaPValves guaranteed delta T www.flowcontrol.com 10-year warranty www.flowcontrol.com made in the USA P.O. Box 848 18715 141st Ave NE Woodinville, Washington 98072
CALEFFI. QuickSetter Balancing Valve with flow meter. Installation Tip
CALEFFI www.caleffi.com 80.0 QuickSetter Balancing Valve with flow meter Copyright 08 Caleffi Series Function The balancing valve accurately controls the flow rate of heating and cooling transfer fluid
Page Concealed Flush Valve (1976 on)
8T _ Series Concealed Flush Valve (16 on) 2 10 14 11 15 1 8 OSC. HANDLE 16 1 10 14 1 12 15 8 4 1 /8" PUSH BUTTON 16 5/8" PUSH BUTTON 5 " PUSH PLATE OUTLETS See Page 40 18 21 2 22 20 6 FOOT PEDAL REPAIR
220 Series Innova-Flo o
Smart Vortex Flow Meter Features Volumetric flow monitoring of most gases, liquids and steam Smart electronics extends range down to a Reynolds number of 5000 Insertion style allows installation in any
AutoFlow. Automatic Flow Control Valves
AutoFlow Automatic Flow Control Valves IMI FLOW DESIGN / AutoFlow / F010 Automatic Balancing Brochure Benefits of Automatic Balancing System equipment, such as chillers and individual terminal units, is
ACCESSORIES 204 ACCESSORIES
ESSORIES E S S O R I E S rystal Fountains manufactures a select line of water feature accessories. From swivel units to help align spray nozzles to hydraulic fill valves, rystal Fountains manufactures
New Fan Coil Piping Package. Redefine your comfort zone.
New Fan Coil Piping Package PIPING PACKAGES Table of Contents General Notes and Legend...3 Piping Package Code Descriptions & Diagrams THB, THH and TVB Fan Coils...4 TVS Fan Coil, 2-Way...5 TVS Fan Coil,
PIPING PACKAGES TABLE OF CONTENTS
PIPING PACKAGES TABLE OF CONTENTS ITEM PAGE General Notes and Legend........................................................ 3 Piping Package Code Descriptions & Diagrams VAV Products and HL, HP, VF, and
D I V I S I O N O F M A R S H B E L L O F R A M
PH Regulator Large Capacity Working Media Include ir, Steam and Liquids ll Vents are Tapped The PH is a direct operating pressure reducing regulator with large capacity. Ideally suited for uses in oil
Ultra High Pressure Valves, Fittings and Tubing Pressures to 152,000 psi
Ultra High Valves, Fittings and Tubing s to 152,000 psi MXIMTOR has been designing and manufacturing high pressure equipment for more than thirty years and has a worldwide reputation for quality and reliability,
Bourdon Tube Type Differential Pressure Gauge & Switches Model 109
BULLETIN NO. 109/11 (SUPERSEDES BULLETIN NO. 109/05) Bourdon Tube Type Differential Pressure Gauge & Switches Model 109 LOKED LOGI LRM ONTROLS (vailable with 1 or 2 switches for alarm & control) Over Range
INVITATION TO BID FAILURE TO SIGN WILL DISQUALIFY BID Bid No.: LIBRARY-AHU ADDENDUM NO. 2
INVITATION TO BID FAILURE TO SIGN WILL DISQUALIFY BID Bid No.: LIBRARY-AHU ADDENDUM NO. 2 Signature City Zip Due Date: 9/7/2016 at 3:00 P.M. Show bid opening and bid invitation number in lower left hand
Erie VT/VS PopTop Series Two Position Spring Return Valves
Erie VT/VS PopTop Series Two Position Spring Return Valves General & High Close-Off PopTop Zone Valves General Instructions pplication Erie PopTop Series valve bodies and actuators provide easy installation
CLIMA. Take Control of Your System with. Gain Efficiency -> Save Energy. technological solutions
technological solutions Gain Efficiency -> Save Energy Take Control of Your System with CLIMA PL-cimCLIMA_V001.2 1/14 Phone: 877.228.9246 Fax: 877.232.9246 E-mail: info@cimberiovalve.com www.cimberiovalve.com
PIPING PACKAGES For Chilled and Hot Water Fan Coil Units
WWW.KRUEGER-HVAC.COM PIPING PACKAGES For Chilled and Hot Water Fan Coil Units PROVIDING YOU WITH AIR DISTRIBUTION AND EQUIPMENT SOLUTIONS TABLE OF CONTENTS General Notes... 4 Code Descriptions... 5 Guide
Air Actuated Ball Valves 3-Way T-Port Stainless Steel, Full Bore 1/4 to 2 NPT
ir ctuated all Valves 3-Way T-Port Stainless Steel, ull ore 1/4 to 2 SRIS eatures ull Port 3-way T flow path irect mount valve with standard ISO5211 mount 316 stainless steel body, ball and stem ctuators