Westinghouse Electric Corporation Distribution Apparatus Division Bloomington, Indiana 47401

Transcription

1 February 26, 1976 Supersedes PL dated October 15,1974 Pages 1-8 Prices effective April 29, 1974 Subject to change without notice Selling Policy Mailed to E, D, C/1991, 2430/ PL Standard Bill of Material/ Design Features Amp cutouts include tin plated parallel groove connectors suitable for copper or aluminum conductors from No. 8 to 4/0 ACSR. 200 Amp cutouts and 300 Amp disconnects include eyebolt connectors suitable for copper or aluminum conductors from No. 6 to 250 MCM. Fuse holders for 14.4/24.9 and 1 shot 27Kv cutouts are identical in length. All cutouts are furnished with NEMA "B" crossarm mounting brackets. All castings are molded from aluminum bronze ingots, except the disconnect blades which are molded from manganese bronze. All Westinghouse fuse holders will accommodate either solid or expendable caps. Voltage Rating Single Voltage Cutouts with single voltage ratings are suitable for application on circuits with lineto-line voltages not in excess of value shown. Dual Voltage The use of LOX cutouts is verified by extensive tests conducted on all voltages from 34.5 kv multi-grounded wye down to 2.4 kv delta. These cutouts are suitable for application on single phase circuits having maximum line-to-ground voltage not in excess of value shown to the left of diagonal line. For three phase circuits, the maximum lineto-line voltage should not exceed the value shown to the right of the diagonal line. Westinghouse Electric Corporation Distribution Apparatus Division Bloomington, Indiana /24.9, 27 and 20/34.5 Kv and 200 Amps Interrupting Capacity Up to Amps Amp heavy duty cutouts have paper tubes impregnated with a phenolic resin. Tubes are centerless ground and painted ASA-70 grey. Amp extra heavy duty cutouts and all 200 Amp cutouts have glass filament wound tubes with an epoxy resin binder. Tubes are centerless ground and are not painted. 200 Amp cutout can be converted to a 300 Amp disconnect by interchanging the fuse holder and the appropriate length disconnect blade from the Parts Section of this Price List. Interrupting Rating Interrupting ratings for Westinghouse LOX cutouts are established on the basis of the maximum line-to-ground voltage across the fuse tube. The voltages used in establishing the ratings are as follows: Cutout Voltage Rating 14.4/ 24.9 KV 20/34.5 KV 27 KV Voltage Across Fuse Tube to Establish Interrupting Rating 20 KV 27 KV P WEA Page 1 Non-Load break Open Fuse Cutouts Type LOX

2 Page 2 Single Cutout List Prices, Standard Styles: Order by Style Number on Tops or Q-09CD Description Cont. NEMA BIL Style Style List Wt. Lbs. Cutouts Current Interrupting Number Number Price With Brkt. Per Rating Rating RMS '73 Design '74 Design Net Ship- Pallet Asym. Amps ping 14.4/24.9 KV Grounded Wye Maximum Voltage Heavy Duty (Solid Cap) A696A01 236C909A A693A01 236C909A Extra Heavy Duty (Solid Cap) A697A01 236C909A Extra A6A01 236C909A Normal Duty (Solid Cap) A698A01 236C909A A699A01 236C909A Disconnect A701A01 236C909A /34.5 KV Grounded Wye Maximum Voltage Heavy Duty (Solid Cap) A313A01 236C909A A314A01 236C909A KV Maximum Voltage A988A01 236C909A Extra A092A01 236C909A (j) For 7.8/13.8 and cutouts refer to high as 27 KV. Where recovery voltage does not ex- PWEA. ceed, which is usually the case on three phase One shot rating. Fuse holder has to be replaced after installations and all single phase installations, the cut amp operation. Designed for application on 25 out has a 5-shot rating of Amps asymmetrical. KV grounded wye systems where faults on three phase equipment installations may see recovery voltages as Cutout-Arrester Combination List Prices: Order by Style Number on TOPS Style No. Style No. Cont. Type Interrupting Cutout Arrester List Approx. Cutouts '73 Design '74 Design Amps of Amps Description Rating Price WI. Lbs. Per Mtg. Exp. Cap. Net Ship- Pallet 14.4/24.9 Kv Grounded Wye Maximum Voltage 633A324A01 236C912A08 Crossarm 8,000 Heavy Duty A323A01 236C912A07 Pole 8,000 Heavy Duty ping

3 Parts Fuse Holders and Disconnect Blades for LOX Cutouts Order by Style Number on 0-09 Only Description Continuous NEMA For LDX Cutout; Current Interrupting Style Number of Rating Rating Rms Fuse Holder or Amperes Asymmetrical Disconnect Blade Amperes For 7.8/13.8 Kv Cutouts Heavy Duty (Solid Cap) A342A A343A01 Extra Heavy Duty (Solid Cap) A344A01 Extra A345A01 Normal Duty (Solid Cap) A347A A348A01 Disconnect A239G01 For 15 Kv Cutouts Heavy Duty (Solid Cap) A497A A498A01 Extra Heavy Duty (Solid Cap) C083G05 Extra C083G07 Normal Duty (Solid Cap) C694G C694G08 Disconnect A239G02 For 14.4/24.9 Kv Cutouts Heavy Duty (Solid Cap) A499A A500A01 Extra Heavy Duty (Solid Cap) A523G17 Extra A523G19 Normal Duty (Solid Cap) A523G A523G28 Disconnect A239G02 For 20/34.5 Kv Cutouts Heavy Duty (Solid Cap) A316A A317A01 For 27 Kv Cutouts A091A01 Extra Heavy Duty (Solid Cap) A093A01 Spare Caps for Fuseholders Description Style Number RAM AD of Each Cap For Amp Cutouts Solid Cap for All Amp LDX 162A775H Expendable Cap for All Amp LDX Heavy Duty 3872A21G For 200 Amp Cutouts Solid Cap for All 200 Amp LDX 162A775H Expendable Cap for 200 Amp LDX Heavy Duty 161A292H RAM AD List Price $ list Price of Each Cap $ P WEA Page 3

4 Page 4 Optional Features/Accessories The standard styles can be modified in a variety of ways. To price a cutout other than a standard style, select the base price from Modi- Accessory fication Number A B c D E List Price Adders (+) or Deducts (-) 200 Amp main contacts on Amp cutouts. NOTE: Amp cutouts are normally furnished with a main contact capable of carrying Amps continuous with a fuseholder or 200 Amps with a disconnect blade. + $0.90 Delete the NEMA "A" (366C723G05) or "B" ( 403A 101 G03) bracket. Furnish NEMA "B" braeket (403A101G03) in place of NEMA "A" bracket (366C723G05). (Do not deduct for NEMA "A") - $ $0.75 Eyebolt connectors to accommodate No.6 to 250 MCM copper or aluminum conductors in place of the parallel groove connectors 5554A16H01 on Amp cutouts that accommodate lli 8 solid to 4/0 ACSR. Two required per cutout. (628A333H01) + $1.00 Ea. Connector Furnish parallel groove connector 5554A 16H01 that accommodates lli 8 solid to 4/0 ACSR on 200A cutouts in place of standard eyebolt that accommodates No. 6 to 250 MCM (628A333H01). Two required per cutout. - $1.00 Ea. Connector the standard style table on the basis of the cutout voltage, current, and interrupting rating and then add or subtract the modification price additions or deductions to the base price to determine the total list price. Standard Configuration Once the cutout bill of material and list price have been determined, a style number must be assigned for order entry. This style number is available from the Distribution Apparatus Division, Bloomington, Indiana. Modification Configuration

5 Optional Features/Accessories for Standard Units and Combination Units, Continued Modi- Accessory List Price Standard fica- Adders ( +) Configuration tion or Number Deducts(-) F G H J Eyebolt connectors to accommodate No. 8 to 2/0 copper or aluminum conductors in place of the parallel groove connectors on Amp cutouts. Two required per cutout. (678A517G01) Special hookeye to increase the opening force by a factor of approximately 3. (803B200H01) Oversize crossarm mounting bracket for crossarms up to 6-1 /8"' in height and 4-1 /2" in width. Standard NEMA bracket is for 3" x 4" to 4" x 5" crossarms. (366C926G05) + $0.80 Ea. Connector + $ $0.10 6" Carriage bolts 161 A486H21 for NEMA brackets in place of the standard 5" carriage bolts 161 A487 H01 furnished as part of the standard style. Cork gasket mounting cushion under the nut on the top contact bolt and the back bracket bolt. + $0.30 For Two Bolts + $0.10 Ea. Gasket P WEA Page 5 Modification Configuration

6 Page 6 Optional Features/Accessories for Standard Units and Combination Units, Continued Modi- Accessory List Price Standard fica- Adders ( +) Configuration tion or Number Deducts ( -) K L M 1 /2" x 1-1/2" bolt assembled into the cutout mounting bracket, including lock washer and star washer. NOTE: This carriage bolt is normally pressed into the "L" bracket of the NEMA mounting bracket. When the bolt is to be assembled by the user into the mounting bracket, a deduct should be made for the bracket per modification " B" if it is not required. + $0.35 Hooks for use with the S & C loadbuster tool. + $0.90 Seacoast design. All galvanized steel parts on the cutout are replaced either by stainless steel or silicon bronze parts. This includes the top contact terminal support and stop, the top contact and mounting bracket bolts, the bottom clamp, and the bottom clamping bolts as indicated by arrows. + $6.75 Modification Configuration

7 I Optional Features/Accessories for Standard Units and Combination Units, Continued Modi- Accessory List Price Standard fica- Adders ( +) Configuration tion Number or Deducts (-) N 0 p Elongated "L" bracket 367C802H13 with an "A" dimension of 5". NOTE: Standard "'L" bracket 366C723H01 has an "A" dimension of 2-1/4". Universal mounting bracket on combination units to provide either pole or crossarm mounting. + $ $1.50 Bracket for mounting two (2) arresters on either type of combination mounting bracket: NOTE: Adder for arrester also required. + $1.65 r-- I A=2.q " P WEA Page 7 Modification Configuration Solder less Connectors on Top and Bottom Terminals for Number 6 Solid to Number 2 Stranded Cable

8 P WEA Page 8 Optional Features/Accessories for Standard Units and Combination Units, Continued Modification Number Q R s Accessory To furnish the following arrester on a combination unit in place of a 10 KV arrester: 3 KV 6 KV 12 KV To furnish second arrester on a combination unit for dual mounting: 3 KV 6 KV 9/10 KV 12 KV 18 KV To furnish a 200 Amp cutout on a combination unit in place of a Amp cutout. Further Information Description: DB LBU, DB LOX, D WE A. NCX Fuse Links Section Enclosed Fuse Cutouts Current Limiting Cutouts PL Load break Cutouts PL Non-Loadbreak Cutouts P WE A Westinghouse Electric Corporation Distribution Apparatus Division Bloomington, Indiana List Price Adders ( +) or Deducts (-) $ $ $7.50

9 8 October 15, 1974 Supersedes PL dated April 29, 1974 Pages 1-2 and PL , dated April 4, 1974, pages 1-2 Prices effective April 29, 1974 Subject to change without notice Selling Policy Mailed to E, D, C/1991 /PL Standard Bill of Material/ Design Features Amp cutouts include tin plated parallel groove connectors suitable for copper or aluminum conductors from No. 8 to 4/0 ACSR. 200 Amp cutouts and 300 Amp disconnects include eyebolt connectors suitable for copper or aluminum conductors from No. 6 to 250 MCM. Fuse holders for 15Kv and 14.4/24.9 and 1 shot 27Kv cutouts are identical in length. The only difference in the cutouts is the BIL of the cutouts which is determined by the diameter of the porcelain. Amp 7.8/13.8Kv and 15Kv cutouts have NEMA "A" brackets. All other cutouts are furnished with N EMA "B" crossarm mounting brackets. Voltage Rating Single Voltage Cutouts with single voltage ratings are suitable for application on circuits with lineto-line voltages not in excess of value shown. Dual Voltage The use of LOX cutouts is verified by extensive tests conducted on all voltages from 34.5 kv multi-grounded wye down to 2.4 kv delta. These cutouts are suitable for application on single phase circuits having maximum line-to-ground voltage not in excess of value shown to the left of diagonal line. For three phase circuits, the maximum lineto-line voltage should not exceed the value shown to the right of the diagonal line. Westinghouse Electric Corporation Distribution Apparatus Division Bloomington, Indiana /13.8, 15 and 14.4/24.9, 20/34.5 Kv 50, and 200 Amps Interrupting Capacity Up to Amps All castings are molded from aluminum bronze ingots, except the disconnect blades which are molded from manganese bronze. All Westinghouse fuse holders will accommodate either solid or expendable caps. Amp heavy duty cutouts have paper tubes impregnated with a phenolic resin. Tubes are centerless ground and painted ASA-70 grey. Amp extra heavy duty cutouts and all 200 Amp cutouts have glass filament wound tubes with an epoxy resin binder. Tubes are centerless ground and are not painted. 200 Amp cutout can be converted to a 300 Amp disconnect by interchanging the fuse holder and the appropriate length disconnect blade from the Parts Section of this Price List. Interrupting Rating Interrupting ratings for Westinghouse LOX cutouts are established on the basis of the maximum line-to-ground voltage across the fuse tube. The voltages used in establishing the ratings are as follows: Cutout Voltage Rating 7.8/13.8 KV 14.4/24.9 KV 20/34.5 KV 27 KV Voltage Across Fuse Tube to Establish Interrupting Rating 7.8 KV 20 KV 27 KV P WEA Page 1 Non-Load break Open Fuse Cutouts Type LOX

10 P WEA Page 8 Optional Features/Accessories for Standard Units and Combination Units, Continued Modification Number Accessory List Price Adders ( +) or Deducts ( -) s To furnish the following arrester on a combination unit in place of a 10 KV arrester: 3 KV 6 KV KV T u To furnish second arrester on a combination unit for dual mounting: 3 KV 6 KV 9/10 KV 12 KV 18 KV To furnish a 200 Amp cutout on a combination unit in place of a Amp cutout. Further Information Description: DB LBU, DB LDX Fuse Links Section Enclosed Fuse Cutouts Current Limiting Cutouts PL Loadbreak Cutouts PL We tin? house Electric Dlstnb tjon Corporation Apparatus Division Bloommgton, Indiana $ $ $

11 Westinghouse Dual Voltage The use of LOX cutouts is verified by extensive tests conducted on all voltages from 34.5 kv multi-grounded wye down to 2.4 kv delta. These cutouts are suitable for application on single phase circuits having maximum line-to-ground voltage not in excess of value shown to the left of diagonal line. For three phase circuits, the maximum line-to-line voltage should not exceed the value shown to the right of the diagonal line. Single Voltage Cutouts having single voltage ratings are suitable for application on circuits with lineto-line voltages not in excess of value shown. Prices effective August 24, 1970; subject to change without notice. Discount Symbol CC-53 Selling Policy Non- Loadbreal< Open Fuse Cutouts Type LOX PL Page 1 7.8/13.8, 15 and 14.4/ /34.5 Kv 50, and 200 Amps Interrupting Capacity Up to Amps List Prices, Single Insulator: Order by Style Number on TOPSal Standard Type LOX (Dropout) Description Conlin- NEMA uous Int. Rat- Current ing Rms Rating Asym. Amperes Amperes 7.8/13.8 Kv Grounded Wye Maximum Voltage Heavy Duty (Solid Cap) Extra Heavy Duty (Solid Cap) 00 Extra Normal Duty (Solid Cap) Disconnect Kv Maximum Voltage Heavy Duty (Solid Cap) Extra Heavy Duty (Solid Cap) 8000 Extra Normal Duty (Solid Cap) Disconnect /24.9 Kv Grounded Wye Maximum Voltage Heavy Duty (Solid Cap) Extra Heavy Duty (Solid Cap) 8000 Extra Normal Duty (Solid Cap) Disconnect /34.5 Kv Grounded Wye Maximum Voltage Heavy Duty (Solid Cap) Kv Sky Gray List Wt. Lbs. BIL Style Price with Brkt. NumberCD<n Net Ship ping 633A326A01 $ A327A A328A A329A A331A A332A A333A A473A A474A A475A A476A A478A A479A A480A A696A A693A A697A A6A A698A A699A A701A A313A01 I A314A CD ampere LOX style numbers include tin-plated parallel groove type terminals suitable for copper or aluminum conductors from No. 8 solid to 4/0 ACSR. 200 ampere cutouts include eyebolt terminals suilable for conductors No. 6 to 250 MCM. en Style numbers and prices do not include Fuse Links. See for rating 14.4/24.9 Kv and 20/34.5 Kv units are packed 18 per pallet. All others are 24 units per pallet. March 9, 1972 Supersedes PL , pages 1-2, dated August 24, 1970 E, D, C/1991 /PL

12 u. Yl...,.,, PL Page 2 Non-Loadbreak Open Fuse Cutouts Type LOX 7.8/13.8, 15 and 14.4/24.9, 20/34.5 Kv 50, and 200 Amps Interrupting Capacity Up to Amps Fuseholders and Disconnect Blades for LBU and LDX Cutouts Order by Style Number on TOPS Description For 7.8/13.8 Kv Cutouts Heavy Duty (Solid Cap) Extra Heavy Duty (Solid Cap) Extra Heavy Duty ( Exp. Cap) Normal Duty (Solid Cap) Disconnect Continuous Current Rating Amperes For 15 Kv Cutouts ( Amp Cutouts Only) Heavy Duty (Solid Cap) Extra Heavy Duty (Solid Cap) Extra For 15 Kv Cutouts (200 Amp Cutouts Only) Normal Duty_ (Solid Cap) Disconnect For 14.4/24.9 Kv Cutouts ( Amp Cutouts Only) Heavy Duty (Solid Cap) Extra Heavy Duty (Solid Cap) Extra For 14.4/24.9 Kv Cutouts (200 Amp Cutouts Only) Normal Duty (Solid Cap) Disconnect For 20/34.5 Kv Cutouts Heavy Duty (Solid Cap) Spare Caps for Fuseholders NEMA Interrupting Rating Rms Asymmetrical Amperes For LDX Cutout Style Number for Fuse Holder 633A342A01 633A343A01 633A344A01 633A345A01 633A347A01 633A348A01 680A239G01 633A497A01 633A498A01 367C083G05 367C083G C694G07 367C694G08 680A239G02 633A499A01 633A500A01 678A523G17 678A523G A523G27 678A523G28 680A239G02 633A316A01 633A317A01 List Price $ Description Style Number List Price of Each Cap of Each Cap For Amp Cutouts Solid Cap for All Amp LDX Expendable Cap for All Amp LOX Heavy Duty For 200 Amp Cutouts Solid Cap for All 200 Amp LOX Expendable Cap for 200 Amp LOX Heavy Duty Further Information Description: DB LBU, DB LOX Fuse Links Section Enclosed Fuse Cutouts A775H02 161A292H01 162A775H03 161A292H03 Westinghouse Electric Corporation Distribution Apparatus Division, Bloomington, Indiana Printed in USA $ """"'