BODY CONTROL SYSTEM SECTION BCS CONTENTS ELECTRICAL & POWER CONTROL BCS-1 PRECAUTION... 3 SYSTEM DESCRIPTION... 5

Transcription

1 TR & WR TR ST S Y TR SYSTM TTS RUT... 3 RUTS... 3 recaution for Technicians Using Medical lectric...3 oint to e hecked efore Starting Maintenance Work...3 recaution for Supplemental Restraint System (SRS) "R " and "ST T R-T- SR"...3 recaution for Removing 12V attery...4 SYSTM SRT... 5 MT RTS... 5 Y TR SYSTM...5 Y TR SYSTM : omponent arts ocation...5 WR SUMT TR SYSTM...5 WR SUMT TR SYSTM : omponent arts ocation...5 SYSTM... 6 Y TR SYSTM...6 Y TR SYSTM : System...6 MT SWT R SYSTM...6 MT SWT R SYSTM : System...7 S UR SYSTM...10 S UR SYSTM : System...10 WR SUMT TR SYSTM...10 WR SUMT TR SYSTM : System...11 SS SYSTM ()...13 MM TM...13 MM TM : SUT unction ( - MM TM)...13 R...14 R : SUT unction ( - R )...15 RR WW R...15 RR WW R : SUT unction ( - RR R)...16 UZZR...16 UZZR : SUT unction ( - UZZR)...16 T M...16 T M : SUT unction ( - T M)...17 M...18 M : SUT unction ( - M)...18 WR...21 WR : SUT unction - WR...21 SR...22 SR : SUT unction ( - S- R)...22 TT Y...23 TT Y : SUT unction ( - TT Y)...23 M SW...26 M SW : SUT unction ( - M SW) : SUT unction ( - )...26 MMU...27 MMU : SUT unction ( - MMU)...27 TTRY SVR...27 TTRY SVR : SUT unction ( - TTRY SVR)...27 S S-1

2 TRU TRU : SUT unction ( - TRU) TT M TT M : SUT unction ( - TT) RT WR RT WR : SUT unction ( - R- T WR) S UR S UR : SUT unction ( - S UR) R RSSUR MTR R RSSUR MTR : SUT unction ( - R RSSUR MTR) U SS RMT Reference Value ail-safe T nspection riority hart T ndex WR RM Wiring iagram S ST ST USTMT T SRV W R TR UT () T SRV W R TR UT () : T SRV W R TR UT () : Work rocedure URT () URT () : URT () : Work rocedure URT () : onfiguration list T/RUT SS U1000 MM T ogic iagnosis rocedure U1010 TR UT () T ogic iagnosis rocedure U0293 V /U MM T ogic iagnosis rocedure U0415 V S T ogic iagnosis rocedure W VT T ogic iagnosis rocedure WR SUY RU RUT iagnosis rocedure MT SWT UTUT RUT iagnosis rocedure MT SWT UT RUT iagnosis rocedure SYMTM SS MT SWT SYSTM SYM- TMS Symptom Table RMV STT Removal and nstallation MT SWT xploded View Removal and nstallation S-2

3 < RUT > RUT RUTS RUTS recaution for Technicians Using Medical lectric : RT RT WR: arts with strong magnet is used in this vehicle. Technicians using a medical electric device such as pacemaker must never perform operation on the vehicle, as magnetic field can affect the device function by approaching to such parts. RM R RUT WR: f a technician uses a medical electric device such as an implantable cardiac pacemaker or an implantable cardioverter defibrillator, the possible effects on the devices must be checked with the device manufacturer before starting the charge operation. s radiated electromagnetic wave generated by on board charger at normal charge operation may effect medical electric devices, a technician using a medical electric device such as implantable cardiac pacemaker or an implantable cardioverter defibrillator must not enter the vehicle compartment (including luggage room) during normal charge operation. recaution at telematics system operation WR: f a technician uses implantable cardiac pacemaker or implantable cardioverter defibrillator (), avoid the device implanted part from approaching within approximately 220 mm (8.66 in) from interior/exterior antenna. The electromagnetic wave of TU might affect the function of the implantable cardiac pacemaker or the implantable cardioverter defibrillator (), when using the service, etc. f a technician uses other medical electric devices than implantable cardiac pacemaker or implantable cardioverter defibrillator(), the electromagnetic wave of TU might affect the function of the device. The possible effects on the devices must be checked with the device manufacturer before TU use. recaution at intelligent key system operation WR: f a technician uses implantable cardiac pacemaker or implantable cardioverter defibrillator (), avoid the device implanted part from approaching within approximately 220 mm (8.66 in) from interior/exterior antenna. The electromagnetic wave of intelligent key might affect the function of the implantable cardiac pacemaker or the implantable cardioverter defibrillator (), at door operation, at each request switch operation, or at engine starting. f a technician uses other medical electric devices than implantable cardiac pacemaker or implantable cardioverter defibrillator (), the electromagnetic wave of intelligent key might affect the function of the device. The possible effects on the devices must be checked with the device manufacturer before intelligent key use. oint to e hecked efore Starting Maintenance Work : The high voltage system may starts automatically. t is required to check that the timer air conditioner and timer charge (during VS connection) are not set before starting maintenance work. f the timer air conditioner or timer charge (during VS connection) is set, the high voltage system starts automatically even when the power switch is in state. recaution for Supplemental Restraint System (SRS) "R " and "ST T R-TSR" : S The Supplemental Restraint System such as R and ST T R-TSR, used along with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger for certain types of collision. This system includes seat belt switch inputs and dual stage front air bag modules. The SRS S-3

4 < RUT > RUTS system uses the seat belt switches to determine the front air bag deployment, and may only deploy one front air bag, depending on the severity of a collision and whether the front occupants are belted or unbelted. nformation necessary to service the system safely is included in the SRS R and ST T of this Service Manual. WR: lways observe the following items for preventing accidental activation. To avoid rendering the SRS inoperative, which could increase the risk of personal injury or death in the event of a collision that would result in air bag inflation, all maintenance must be performed by an authorized SS/T dealer. mproper maintenance, including incorrect removal and installation of the SRS, can lead to personal injury caused by unintentional activation of the system. or removal of Spiral able and ir ag Module, see SRS R. ever use electrical test equipment on any circuit related to the SRS unless instructed to in this Service Manual. SRS wiring harnesses can be identified by yellow and/or orange harnesses or harness connectors. RUTS W US WR TS (R R TR) MMRS WR: lways observe the following items for preventing accidental activation. When working near the ir ag iagnosis Sensor Unit or other ir ag System sensors with the power switch, never use air or electric power tools or strike near the sensor(s) with a hammer. eavy vibration could activate the sensor(s) and deploy the air bag(s), possibly causing serious injury. When using air or electric power tools or hammers, always switch the power switch, disconnect the 12V battery, and wait at least 3 minutes before performing any service. recaution for Removing 12V attery : When removing the 12V battery, turn / the power switch and check that the charging status indicator does not blink. The 12V battery must be removed within one hour after checking the indicator lamp. The automatic 12V battery charge control may start even when the power switch is in state. The automatic 12V battery charge control does not start within approximately one hour when the power switch is turned /. S-4

5 < SYSTM SRT > SYSTM SRT MT RTS Y TR SYSTM MT RTS Y TR SYSTM : omponent arts ocation : MM0607ZZ 1.. ehind of instrument lower panel (eft side back) WR SUMT TR SYSTM WR SUMT TR SYSTM : omponent arts ocation : S MM0608ZZ 1. lectrically-driven ntelligent rake unit Refer to TM-26, "omponent arts ocation". 4. ombination meter Refer to MW-6, "MTR SYSTM : omponent arts ocation". 2. M /R Refer to S-5, "omponent arts ocation". 3. Refer to S-5, "Y TR SYSTM : omponent arts ocation". S-5

6 < SYSTM SRT > SYSTM Y TR SYSTM SYSTM Y TR SYSTM : System : UT (ody ontrol Module) controls the various electrical components. t inputs the information required to the control from communication and the signal received from each switch and sensor. has combination switch reading function for reading the operation status of combination switches (light, turn signal, wiper and washer) in addition to a function for controlling the operation of various electrical components. t also has the signal transmission function as the passed point of signal and the power saving control function that reduces the power consumption with the power switch. is equipped with the diagnosis function that performs the diagnosis with SUT and various settings. TR UT ST System ombination switch reading system Signal buffer system ower consumption control system eadlamp system uto light system Turn signal and hazard warning lamp system arking, license plate, side marker and tail lamps system ront fog lamp system xterior lamp battery saver system nterior room lamp control system nterior room lamp battery saver system ront wiper and washer system Rear wiper and washer system Warning chime system ower door lock system ntelligent ey system ack door opener system issan Vehicle mmobilizer System (VS) - TS Vehicle security system Rear window defogger system ower window system [Retained accessory power (R function)] Tire pressure monitoring system MT SWT R SYSTM Reference S-7, "MT SWT R SYSTM : System " S-10, "S UR SYSTM : System " S-11, "WR SUMT TR SYSTM : System " X-10, "M SYSTM : System " X-12, "UT T SYSTM : System " X-15, "TUR S ZR WR M SYS- TM : System " X-16, "R, S T, S MRR T M SYSTM : System " X-19, "RT M SYSTM : System " X-21, "XTRR M TTRY SVR SYSTM : System " -7, "TRR RM M TR SYSTM : System " -10, "TRR RM M TTRY SVR SYSTM : System " WW-7, "RT WR WSR SYSTM : System " WW-11, "RR WR WSR SYSTM : System " WS-6, "WR M SYSTM : System " -14, "System " -17, "TT Y SYSTM : System " -31, "System " S-14, "SS V MMZR SYSTM-TS : System " S-19, "V SURTY SYSTM : System iagram" -5, "System " W-7, "System " WT-9, "System " S-6

7 < SYSTM SRT > SYSTM MT SWT R SYSTM : System SYSTM RM : *: T M switch links lighting switch 1ST and 2 positions. UT reads the status of the combination switch (light, turn signal, wiper and washer) and recognizes the status of each switch. has a combination of 5 output terminals (UTUT 1-5) and 5 input terminals (UT 1-5). t reads a maximum of 20 switch status. MT SWT MTRX ombination switch circuit MM0636 S *: T M switch links lighting switch 1ST and 2 positions. MM0637 ombination switch UT-UTUT system list System UT 1 UT 2 UT 3 UT 4 UT 5 UTUT 1 R WSR R WR W TUR TUR R UTUT 2 R WR R WR T SS M 1 UTUT 3 W VUM 1 RR WSR M 2 M S-7

8 < SYSTM SRT > SYSTM System UT 1 UT 2 UT 3 UT 4 UT 5 UTUT 4 RR WR T W VUM 3 UT T T M UTUT 5 W VUM 2 RR WR R eadlamp has a dual system switch. MT SWT R UT reads the status of the combination switch at 10 ms interval normally. M0609 reads the status of the combination switch at 60 ms interval when is controlled at low power consumption control mode. operates as follows and judges the status of the combination switch. - t operates the transistor on UTUT side in the following order: UTUT , and outputs voltage waveform. - The voltage waveform of UTUT corresponding to the formed circuit is input into the interface on UT side if any (1 or more) switches are. - t reads this change of the voltage as the status signal of the combination switch. peration xample n the following operation example, the combination of the status signals of the combination switch is replaced as follows: UT 1-5 to 1-5 and UTUT 1-5 to -. xample 1: When a switch (T M switch) is turned MM0326 S-8

9 < SYSTM SRT > SYSTM The circuit between UTUT 4 and UT 5 is formed when the T M switch is turned. M1545 detects the combination switch status signal 5 when the signal of UTUT 4 is input to UT 5. judges that the T M switch is when the signal 5 is detected. xample 2: When some switches (TUR R switch, T M switch) are turned The circuits between UTUT 1 and UT 5 and between UTUT 4 and UT 5 are formed when the TUR R switch and T M switch are turned. detects the combination switch status signal 5 when the signals of UTUT 1 and UTUT 4 are input to UT 5. judges that the TUR R switch and T M switch are when the signal 5 is detected. WR VUM ST judges the wiper volume dial 1-7 by the status of W VUM 1, 2 and 3 switches. Wiper volume dial position Switch status M1546 W VUM 1 W VUM 2 W VUM S S-9

10 < SYSTM SRT > SYSTM Wiper volume dial position or details of wiper volume dial position, refer to WW-7, "RT WR WSR SYSTM : System ". S UR SYSTM S UR SYSTM : System SYSTM RM Switch status W VUM 1 W VUM 2 W VUM : UT has the signal transmission function that outputs/transmits each input/received signal to each unit. Signal transmission function list MM0813 Signal name nput ower switch signal oor switch signal Stop lamp switch signal ower switch (push switch) ny door switch Stop lamp switch WR SUMT TR SYSTM M /R () lectrically-driven ntelligent rake unit () ombination meter () M /R () lectrically-driven ntelligent rake unit () lectric parking brake control module () nterlock/ switch signal lectric shift control module M /R () nputs the power switch (push switch) signal and transmits the power switch position status judged with via communication. nputs the door switch signal and transmits it via communication. nputs the stop lamp switch 1 signal and stop lamp switch 2 signal, and transmits it via communication. nputs the / position signal, and transmits the interlock/ switch signal via communication. S-10

11 < SYSTM SRT > SYSTM WR SUMT TR SYSTM : System SYSTM RM : UT incorporates a power saving control function that reduces the power consumption according to the vehicle status. switches the status (control mode) by itself with the power saving control function. t performs the sleep request to each unit (M /R, combination meter and lectrically-driven ntelligent rake unit) that operates with the power switch. ormal mode (wake-up) - communication is normally performed with other units - ach control with is operating properly communication sleep mode ( sleep) - transmission is stopped - ontrol with only is operating MM0613 ow power consumption mode ( sleep) - ow power consumption control is active - transmission is stopped W WR SUMT TR WT reduces the power consumption with the following operation in the low power consumption mode. The reading interval of the each switches changes from 10 ms interval to 60 ms interval. Sleep mode activation receives the sleep-ready signal (ready) from M /R and combination meter via communication. transmits the sleep wake up signal (sleep) to each unit when all of the sleep conditions are fulfilled. ach unit stops the transmission of communication with the sleep wake up signal. is in communication sleep mode. is in the low power consumption mode and perform the low power consumption control when all of the sleep conditions are fulfilled with sleep condition. S S-11

12 < SYSTM SRT > Sleep condition sleep condition Receiving the sleep-ready signal (ready) from all units 1 minute after turning power switch Theft warning alarm and panic alarm: ot operation Warning chime: ot operation ntelligent ey system buzzer: ot operation Stop lamp switch: Turn signal indicator lamp: ot operation xterior lamp: oor lock status: o change SUT communication status: ot communication Meter display signal: on-transmission oor switch status: o change river door lock status: o change SYSTM sleep condition nterior room lamp battery saver: Time out* R system: ot operation issan Vehicle mmobilizer System (VS) - TS: ot operation Remote keyless entry receiver communication status: o communication Tire pressurer monitoring system (TMS): Stop / indicator lamp: ot operation *: Refer to -10, "TRR RM M TTRY SVR SYSTM : System " for details of the interior room lamp battery saver time. Wake-up operation transmits sleep wake up signal (wake up) to each unit when any condition listed below is established, and then goes into normal mode from low power consumption mode. ach unit starts transmissions with communication by receiving sleep wake up signals. ach unit transmit wake up signals to with communication to convey the start of communication. Wake-up condition Wake-up condition Receiving the sleep-ready signal (ot-ready) from any units ower switch (push switch): azard switch: M switch:, SS switch:, M 1 switch:, M 2 switch:, T M switch: R switch:, TUR R:, TUR :, river door switch:, assenger door switch:, Rear R door switch:, Rear door switch:, ack door switch:, river door request switch: assenger door request switch: ack door request switch: ack door opener switch: Stop lamp switch: oor lock and unlock switch: UTR, UTR U ront door lock assembly (driver side) (door key cylinder switch): UTR, UTR U Remote keyless entry receiver communication: Receiving ront door lock assembly (driver side) (unlock sensor):, S-12

13 < SYSTM SRT > SS SYSTM () MM TM SS SYSTM () MM TM : SUT unction ( - MM TM) T TM SUT performs the following functions via communication with. iagnosis mode Work Support Self iagnostic Result iag Support Monitor ata Monitor ctive Test cu dentification onfiguration SYSTM T can perform the following functions for each system. t can perform the diagnosis modes except the following for all sub system selection items. System *: This item is displayed, but not used. unction hanges the setting for each system function. isplays the diagnosis results judged by. Monitors the reception status of communication viewed from. The input/output signals are displayed. The signals used to activate each device are forcibly supplied from. The part number is displayed. Read and save the vehicle specification. Write the vehicle specification when replacing. Sub system selection item iagnosis mode : : pplicable item Work Support ata Monitor ctive Test oor lock R Rear window defogger RR R Warning chime UZZR nterior room lamp timer T M xterior lamp M Wiper and washer WR Turn signal and hazard warning lamps SR R TR* ntelligent ey system TT Y ombination switch M SW ody control system VS - TS MMU nterior room lamp battery saver TTRY SVR ack door open TRU Theft warning alarm TT M R system RT WR Signal buffer system S UR TMS R RSSUR MTR RZ RM T () The records the following vehicle condition at the time a particular T is detected, and displays on SUT. S S-13

14 < SYSTM SRT > SS SYSTM () SUT screen item ndication/unit Vehicle Speed km/h Vehicle speed of the moment a particular T is detected do/trip Meter km Total mileage (dometer value) of the moment a particular T is detected Vehicle ondition S> S> > > RU> R>RU RU>URT > > > >R >S >S ounter 0-39 RU R ower supply position status of the moment a particular T is detected* While turning status from low power consumption mode to normal mode [ower supply position is ()] While turning status from low power consumption mode to normal mode [ower supply position is ()] While turning power supply position from () to While turning power supply position from to While turning power supply position from RY (RU) to (xcept emergency stop operation) While turning power supply position from RY (R) to RY (RU) While turning power supply position from RY (RU) to (mergency stop operation) While turning power supply position from to () While turning power supply position from () to () While turning power supply position from () to While turning power supply position from to RY (R) While turning status from normal mode [ower supply position is ()] to low power consumption mode While turning status from normal mode [ower supply position is ()] to low power consumption mode ower supply position is () ower supply position is () ower supply position is ower supply position is ower supply position is RY (RU) ower supply position is RY (R) The number of times that power switch is turned after T is detected The number is 0 when a malfunction is detected now. The number increases like after returning to the normal condition whenever power switch. The number is fixed to 39 until the self-diagnosis results are erased if it is over 39. *: Refer to the following for details of the power supply position. (, ): ower switch : ower switch : ower switch RY (R): Shifting to vehicle condition RY (Transmitting the RY signal from to VM) RY (RU): Vehicle condition RY ower supply position shifts to () from (), when power switch is in the position, shift position is in the position, and any of the following conditions are met. losing door pening door oor is locked using door request switch oor is locked using ntelligent ey The power supply position shifts to when the power switch (push switch) is pushed at (). R S-14

15 < SYSTM SRT > SS SYSTM () R : SUT unction ( - R ) WR SURT : Monitor item R -U ST UTMT R S- T UTMT R U ST UTMT /U ST T MTR Selective unlock function mode can be changed to operation with this mode : perate : on-operation utomatic door lock function mode can be selected from the following in this mode V S: ll doors are locked when vehicle speed more than 24km/h (15M) R: ll doors are locked when shifting the selector lever from position to other than the position utomatic door unlock function mode can be selected from the following in the mode M 1: ll doors are unlocked when the power supply position is changed from to M 2: ll doors are unlocked when shifting the selector lever from any position other than the to position M 3: river side door is unlocked when the power supply position is changed from to M 4: river side door is unlocked when shifting the selector lever from any position other than the to position M 5: This item is displayed, but cannot be used M 6: This item is displayed, but cannot be used utomatic door lock/unlock function mode can be selected from the following in this mode : on-operational Unlock ly: oor unlock operation only ock ly: oor lock operation only ock/unlock: ock and unlock operation Monitor tem RQ SW-R RQ SW-S RQ SW-/TR R SW-R R SW-S R SW-RR R SW-R R SW- SW U SW Y Y -SW Y Y U-SW ontents ndicated [/] condition of door request switch (driver side) ndicated [/] condition of door request switch (passenger side) ndicated [/] condition of back door request switch ndicated [/] condition of front door switch (driver side) ndicated [/] condition of front door switch (passenger side) ndicated [/] condition of rear door switch R ndicated [/] condition of rear door switch ndicated [/] condition of back door switch ndicated [/] condition of lock signal from door lock unlock switch ndicated [/] condition of unlock signal from door lock unlock switch ndicated [/] condition of lock signal from door key cylinder ndicated [/] condition of unlock signal from door key cylinder S TV TST R Test item RR WW R This test is able to check door lock/unlock operation The all door lock actuators are locked when on SUT screen is touched The all door lock actuators are unlocked when U on SUT screen is touched The door lock actuator (driver side) is unlocked when R U on SUT screen is touched The door lock actuator (passenger side) is unlocked when U on SUT screen is touched The door lock actuator (other) is unlocked when TR U on SUT screen is touched S-15

16 < SYSTM SRT > SS SYSTM () RR WW R : SUT unction ( - RR R) T MTR : Monitor tem RR SW US SW isplays ress ()/other () status determined with the rear window defogger switch. ndicates [/] condition of push switch. TV TST Test tem RR R ive a drive signal to the rear window defogger relay to activate it. UZZR UZZR : SUT unction ( - UZZR) : SUT T TMS Test item iagnosis mode ata Monitor isplays input data in real time. UZZR ctive Test peration of electrical loads can be checked by sending driving signal to them. T MTR isplay item [Unit] US SW [/] U S-R [/] V S 1 [km/h] T M SW [/] R SW [/] R SW-R [/] SW [/] Status of push-button power switch judged by. Status of unlock sensor judged by. Value of vehicle speed signal received from combination meter with communication line. Status of lighting switch judged by using the combination switch readout function. Status of front fog lamp switch judged by using the combination switch readout function. Status of driver side door switch judged by. Status of door lock unlock switch judged by. TV TST isplay item [Unit] ST T WR TST RST WR T WR M T M The seat belt warning chime operation can be checked by operating the relevant function (/). The regist warning chime operation can be checked by operating the relevant function (/). The light warning chime operation can be checked by operating the relevant function (/). S-16

17 < SYSTM SRT > SS SYSTM () T M : SUT unction ( - T M) WR SURT : M0961 *: actory setting T MTR Service item Setting item Setting ST / -U T RM M TMR ST RM M TM ST RM M TM ST R M TMR ST * M 2 M 3 * M 4 M 1 M 2 M 3 M 4 M 5 actory setting M 1 M 2 M 3 M 4 M 5 actory setting M 1* M 2 With the interior room lamp timer function Without the interior room lamp timer function 7.5 sec. 15 sec. 30 sec. 0.5 sec. Sets the interior room lamp time. (Timer operating time) 1 sec. Sets the interior room lamp gradual brightening time. UT: 2 sec. Setting cannot be returned to setting at shipment if it is 3 sec. changed once. 0 sec. radually brightens from 0% to 100% brightness in 1 second. 0.5 sec. 1 sec. Sets the interior room lamp gradual dimming time. UT: 2 sec. Setting cannot be returned to setting at shipment if it is 3 sec. changed once. 0 sec. radually dims from 100% to 0% in 1 second. nterior room lamp timer activates with synchronizing all doors. nterior room lamp timer activates with synchronizing the driver door only. S RQ SW-R [/] Monitor item [Unit] The switch status input from request switch (driver side) RQ SW-S [/] The switch status input from request switch (passenger side) S-17

18 < SYSTM SRT > RQ SW-RR [/] RQ SW-R [/] US SW [/] U S -R [/] R SW-R [/] R SW-S [/] R SW-RR [/] R SW- R [/] R SW- [/] SW [/] U SW [/] Y Y -SW [/] Y Y U-SW [/] TR/T MTR [/] R- [/] R-U [/] Monitor item [Unit] SS SYSTM () The item is indicated, but not monitored. The switch status input from power switch river door unlock status input unlock sensor The switch status input from front door switch (driver side) The switch status input from front door switch (passenger side) The switch status input from rear door switch R The switch status input from rear door switch The switch status input from back door switch ock switch status input from door lock and unlock switch Unlock switch status input from door lock and unlock switch ock switch status received from door key cylinder switch Unlock switch status received from door key cylinder switch The item is indicated, but not monitored. ock signal status received from remote keyless entry receiver Unlock signal status received from remote keyless entry receiver TV TST T M M M : SUT unction ( - M) WR SURT Test item peration ST M TST s the interior room lamp control signal to turn the interior room lamps. [Map lamp, room lamp (when applicable lamps switch is in R position.)] Stops the interior room lamp control signal to turn the interior room lamps. The item is indicated, but can not tested : S-18

19 < SYSTM SRT > SS SYSTM () * 1 : or models without auto light system, this item is displayed but is not operated. * 2 : actory setting T MTR Service item Setting item Setting USTM /T ST- T* 1 TTRY SVR ST Y ST* 1 UT T ST* 1 M 1* 2 M 2 ormal More sensitive setting than normal setting (Turns earlier than normal operation) M 3 More sensitive setting than M 2 (Turns earlier than M 2) M 4 ess sensitive setting than normal setting (Turns later than normal operation) * 2 M 1* 2 M 2 M 3 M 4 M 5 M 6 M 7 M 8 M 1* 2 M 2 M 3 M 4 M 5 M 6 With the exterior lamp battery saver function Without the exterior lamp battery saver function 45 sec. Without the function 30 sec. 60 sec. 90 sec. 120 sec. 150 sec. 180 sec. Sets delay timer function timer operation time (ll doors closed) With twilight custom & with wiper T, and With twilight custom & with wiper and With twilight custom & without Without twilight custom & with wiper T, and Without twilight custom & with wiper and Without twilight custom & without US SW [/] Monitor item [Unit] STT [Stop/Stall/rank/Run] V S 1 [km/h] The switch status input from power switch The traction motor status received from VM via communication The value of the vehicle speed received from combination meter via communication S S-19

20 < SYSTM SRT > TUR S R [/] TUR S [/] T M SW [/] M SW [/] M SW1 [/] M SW2 [/] SS SW [/] UT T SW* 1 [/] R SW* 2 [/] R SW-R [/] R SW-S [/] R SW-RR [/] R SW- R [/] R SW- [/] T SSR [//] T S (TT)* 1 [V] T S (T)* 1 [V] Monitor item [Unit] SS SYSTM () ach switch status that judges from the combination switch reading function The switch status input from front door switch (driver side) The switch status input from front door switch (passenger side) The switch status input from rear door switch R The switch status input from rear door switch The switch status input from back door switch This item is indicated, but can not monitored The value of outside brightness voltage input from the optical sensor The value of outside brightness voltage filtered by * 1 : or models without auto light system, this item is not displayed. * 2 : or models without front fog lamp, this item is displayed but is not monitored. TV TST T M M R M* Test item peration i o Transmits the position light request signal to M /R via communication to turn the tail lamp Stops the tail lamp request signal transmission Transmits the high beam request signal via communication to turn the headlamp () Transmits the low beam request signal via communication to turn the headlamp () Stops the high & low beam request signal transmission Transmits the front fog lights request signal to M /R via communication to turn the front fog lamp Stops the front light request signal transmission S-20

21 < SYSTM SRT > SS SYSTM () M S *: or models without front fog lamp, this item is displayed but is not tested. WR WR : SUT unction - WR WR SURT *: actory setting T MTR Test item peration Transmits the dimmer signal to combination meter via communication and dims combination meter Transmits the dimmer signal to V control unit and dims display Stops the dimmer signal transmission Service item Setting item WR S STT * : With vehicle speed (ront wiper intermittent time linked with the vehicle speed and wiper intermittent dial position) Without vehicle speed (ront wiper intermittent time linked with the wiper intermittent dial position) US SW [/] V S 1 [km/h] R WR [/] TV TST Monitor tem [Unit] R WR W [/] R WSR SW [/] R WR T [/] R WR ST [/] T VUM [1 7] RR WR [/] RR WR T [/] RR WSR SW [/] RR WR ST [/] / WS SW [/] The switch status input from power switch (push switch) isplays the value of the vehicle speed signal received from combination meter via communication Status of each switch judged by using the combination switch reading function isplays the status of the front wiper stop position signal received from M /R via communication. Status of each switch judged by using the combination switch reading function Status of each switch judged by using the combination switch reading function Rear wiper motor (stop position) status input from the rear wiper motor The item is indicated, but not monitored S S-21

22 < SYSTM SRT > SS SYSTM () R WR RR WR SR SR : SUT unction ( - SR) WR SURT *: actory setting Test item peration T MTR i o T Transmits the front wiper request signal () to M /R via communication to operate the front wiper operation. Transmits the front wiper request signal () to M /R via communication to operate the front wiper operation. Transmits the front wiper request signal (T) to M /R via communication to operate the front wiper T operation. Stops transmitting the front wiper request signal to stop the front wiper operation. the voltage to operate the rear wiper motor. Stops the voltage to stop the rear wiper motor. Service item Setting item Setting ZR SWR ock ly Unlk ly ock&unlk * With locking only With unlocking only With locking/unlocking Without the function : Sets the hazard warning lamp answer back function when the door is lock/unlock with the request switch or the ntelligent ey. RQ SW-R [/] RQ SW-S [/] US SW [/] TUR S R [/] TUR S [/] ZR SW [/] R- [/] R-U [/] R- [/] Monitor item [Unit] The switch status input from the request switch (driver side) The switch status input from the request switch (passenger side) The switch status input from the power switch ach switch status that detects from the combination switch reading function The switch status input from the hazard switch ock signal status received from the remote keyless entry receiver Unlock signal status received from the remote keyless entry receiver anic alarm signal status received from the remote keyless entry receiver TV TST SR Test item peration R s the voltage to blink the right side turn signal lamps s the voltage to blink the left side turn signal lamps Stops the voltage to turn the turn signal lamps S-22

23 < SYSTM SRT > SS SYSTM () TT Y TT Y : SUT unction ( - TT Y) WR SURT : Monitor item S T SS /U Y -Y STRT Y -Y TRU/SS T R WT YSS RM ST TRU Y - TT Y WR T Y UT ZR SWR S -Y S -Y U SRT R UTUT This function allows inside key antenna self-diagnosis oor lock/unlock function by door request switch mode can be changed to operation in this mode : perate : on-operation RY set function mode can be changed to operation with this mode : perate : on-operation This item is displayed, but cannot be used orn reminder function mode by ntelligent ey button can be changed to operate () or not operate () with this mode : perate : on-operation anic alarm button pressing time on ntelligent ey remote control button can be selected from the following with this mode M 1: 0.5 sec. M 2: on-operation M 3: 1.5 sec. This item is displayed, but cannot be used ntelligent ey low battery warning mode can be changed to operation with this mode : perate : on-operation ey reminder function mode can be changed to operation with this mode : perate : on-operation azard reminder function mode by door request switch and ntelligent ey button can be selected from the following with this mode ock ly: oor lock operation only Unlock ly: oor unlock operation only ock/unlock: ock and unlock operation : on-operation uzzer reminder function (lock operation) mode by door request switch can be selected from the following with this mode orn hirp: Sound horn uzzer: Sound ntelligent ey warning buzzer : on-operation uzzer reminder function (unlock operation) mode by door request switch can be changed to operation with this mode : perate : on-operation This item is displayed, but cannot be used S S-23

24 < SYSTM SRT > Monitor item RM Y UT ST SS SYSTM () t can be checked whether ntelligent ey code is registered or not in this mode uto door lock operation time can be changed in this mode M 1: M 2: 30 sec. M 3: 1 minute M 4: 2 minutes M 5: 3 minutes M 6: 4 minutes M 7: 5 minutes S- RSUT Refer to S-54, "T ndex". T MTR Monitor tem RQ SW -R RQ SW -S RQ SW -/TR US SW UT SW ondition ndicates [/] condition of door request switch (driver side) ndicates [/] condition of door request switch (passenger side) ndicates [/] condition of back door request switch ndicates [/] condition of power switch This item is displayed, but cannot be monitored R SW 1 ndicates [/]* condition of stop lamp switch power supply R SW 2 ndicates [/] condition of stop lamp switch T/ SW ndicates [/] condition of position ST / SW ndicates [/] condition of or position U S -R ndicates [/] condition of driver door U status US SW -M ndicates [/] condition of power switch RY1 -/ ndicates [/] condition of ignition relay 1 T SW -M ndicates [/] condition of position ST -M This item is displayed, but cannot be monitored ST -MT ST -MT STT S/ -M S/ U-M S/ RY-RQ V S 1 V S 2 R STT-R R STT-S RMT STRT RMT R STRT ndicates [/] condition of position ndicates [/] condition of position This item is displayed, but cannot be monitored This item is displayed, but cannot be monitored This item is displayed, but cannot be monitored This item is displayed, but cannot be monitored isplay the vehicle speed signal received from combination meter by numerical value [km/h] isplay the vehicle speed signal received from S actuator and electric unit (control unit) by numerical value [km/h] ndicates [/RY/U] condition of driver side door status ndicates [/RY/U] condition of passenger side door status ndicates [Set/Reset] condition of key ndicates [Set/Reset] condition of STRT Y -Y setting in WR SURT mode This item is displayed, but cannot be monitored S-24

25 < SYSTM SRT > SS SYSTM () TR/T MTR R- R-U R-TR/ R- R-M R U1 R U2 *: is displayed when brake pedal is depressed while brake switch power supply is. TV TST Monitor tem ondition This item is displayed, but cannot be monitored ndicates [/] condition of signal from ntelligent ey ndicates [/] condition of U signal from ntelligent ey This item is displayed, but cannot be monitored ndicates [/] condition of button of ntelligent ey ndicates [/] condition of M signal from ntelligent ey When remote keyless entry receiver receives the signal transmitted while operating on ntelligent ey, the numerical value start changing This item is displayed, but cannot be monitored Test item UTS UZZR S UZZR TR T M SR R R SW UM US SWT TR This test is able to check ntelligent ey warning buzzer operation : perate : on-operation This test is able to check warning chime in combination meter operation Take ut: Take away warning chime sounds when SUT screen is touched ey: ey warning chime sounds when SUT screen is touched nob: position warning chime sounds when SUT screen is touched : on-operation This test is able to check warning lamp operation Y : Y Warning lamp illuminates when SUT screen is touched Y : Y Warning lamp blinks when SUT screen is touched : on-operation This test is able to check interior room lamp operation : perate : on-operation This test is able to check meter display information Traction motor start information displays when on SUT screen is touched Traction motor start information displays when on SUT screen is touched ey warning displays when on SUT screen is touched RTT: This item is displayed, but cannot be used SRT: This item is displayed, but cannot be used ntelligent ey low battery warning displays when TT on SUT screen is touched Take away warning displays when UTY on SUT screen is touched position warning displays when W on SUT screen is touched This test is able to check security hazard lamp operation The hazard lamps are activated after /R/ on SUT screen is touched This test is able to check horn operation : perate : on-operation This test is able to check position signal from electric shift control unit : perate : on-operation This test is able to check power switch illumination operation ower switch illumination illuminates when on SUT screen is touched This test is able to check indicator in power switch operation indicator in power switch illuminates when on SUT screen is touched S S-25

26 < SYSTM SRT > Test item TTRY SVR TRU/ R M SW SS SYSTM () This test is able to check interior room lamp operation. The interior room lamp will be activated after on SUT screen is touched. This test is able to check back door opener actuator open operation. This actuator opens when pen on SUT screen is touched. M SW : SUT unction ( - M SW) : T MTR Monitor item [UT] R WR [/] R WR W [/] R WSR SW [/] R WR T [/] T VUM [1-7] RR WR [/] RR WR T [/] RR WSR SW [/] TUR S R [/] TUR S [/] T M SW [/] M SW [/] M SW 1 [/] M SW 2 [/] SS SW [/] UT T SW [/] R SW [/] isplays the status of the R WR switch in combination switch judged by with the combination switch reading function. isplays the status of the R WR W switch in combination switch judged by with the combination switch reading function. isplays the status of the R WSR switch in combination switch judged by with the combination switch reading function. isplays the status of the R WR UT switch in combination switch judged by with the combination switch reading function. isplays the status of wiper volume dial position judged by with the combination switch reading function. isplays the status of the RR WR switch in combination switch judged by with the combination switch reading function. isplays the status of the RR WR T switch in combination switch judged by with the combination switch reading function. isplays the status of the RR WSR switch in combination switch judged by with the combination switch reading function. isplays the status of the TUR R switch in combination switch judged by with the combination switch reading function. isplays the status of the TUR switch in combination switch judged by with the combination switch reading function. isplays the status of the T M switch in combination switch judged by with the combination switch reading function. isplays the status of the M switch in combination switch judged by with the combination switch reading function. isplays the status of the M 1 switch in combination switch judged by with the combination switch reading function. isplays the status of the M 2 switch in combination switch judged by with the combination switch reading function. isplays the status of the SS switch in combination switch judged by with the combination switch reading function. isplays the status of the UT T switch in combination switch judged by with the combination switch reading function. isplays the status of the R switch in combination switch judged by with the combination switch reading function. : SUT unction ( - ) : WR SURT S-26

27 < SYSTM SRT > SS SYSTM () tem RST STT VU Return a value set with Work Support of each system to a default value in factory shipment. MMU MMU : SUT unction ( - MMU) T MTR : Monitor item RM RM 4 RM 3 RM 2 RM 1 T RSTR T 4 T 3 T 2 T 1 US SW TV TST Test item TT WR SURT Service item RM TTRY SVR ontent ndicates [YT] at all time. Switches to [] when a registered ntelligent ey backside is contacted to power switch. ndicates [ ] when key that is registered is received or is not yet received. ndicates [ ] when key that is not registered is received. ndicates the number of s that are registered. ndicates [/] condition of power switch. This test is able to check security indicator lamp operation. Security indicator lamp is turned on when on SUT screen touched. t is possible to check that dongle unit is applied to the vehicle. TTRY SVR : SUT unction ( - TTRY SVR) WR SURT Service item Setting item Setting : S RM M TMR ST M 1 M 2 M 3 * 30 min. 60 min. 15 min. Sets the interior room lamp battery saver timer operating time. TTRY SVR ST * With the exterior lamp battery saver function Without the exterior lamp battery saver function *:actory setting T MTR S-27

28 < SYSTM SRT > SS SYSTM () RQ SW-R [/] RQ SW-S [/] RQ SW-RR [/] RQ SW-R [/] US SW [/] U S-R [/] R SW-R [/] R SW-S [/] R SW-RR [/] R SW- R [/] R SW- [/] SW [/] U SW [/] TR/T MTR [/] Y Y -SW [/] Y Y U-SW [/] R- [/] R-U [/] Monitor item [Unit] The switch status input from request switch (driver side) The switch status input from front request switch (passenger side) The item is indicated, but not monitored. The switch status input from power switch river door unlock status input unlock sensor The switch status input from front door switch (driver side) The switch status input from front door switch (passenger side) The switch status input from rear door switch R The switch status input from rear door switch The switch status input from back door switch ock switch status input from door lock and unlock switch Unlock switch status input from door lock and unlock switch The item is indicated, but not monitored ock switch status received from door key cylinder switch Unlock switch status received from door key cylinder switch ock signal status received from remote keyless entry receiver Unlock signal status received from remote keyless entry receiver TV TST *: ach lamp switch is in position. TRU TRU : SUT unction ( - TRU) T MTR Test item peration TTRY SVR uts the interior room lamp power supply to turn interior room lamps. s the interior room lamp power supply to turn interior room lamps.* : S-28

29 < SYSTM SRT > SS SYSTM () Monitor tem US SW U S -R V S 1 TR/ SW TR/T MTR R-TR/ TT M TT M : SUT unction ( - TT) WR SURT ontents ndicates [/] condition of power switch ndicates [/] condition of unlock sensor ndicates [km/h] condition of vehicle speed signal from combination meter ndicates [/] condition of back door opener switch. This item is displayed, but cannot be monitored This item is displayed, but cannot be monitored : Service tem SURTY RM ST TT M TR T MTR This mode is able to confirm and change security alarm - setting. The switch which triggered vehicle security alarm is recorded. This mode is able to confirm and erase the record of vehicle security alarm. The trigger data can be erased by touching R on SUT screen. Monitored tem RQ SW -R RQ SW -S RQ SW -RR RQ SW -R RQ SW -/TR US SW U S -R R SW-R R SW-S R SW-RR R SW-R R SW- SW U SW Y Y -SW Y Y U-SW TR/ SW TR/T MTR R- R-U R-TR/ ndicates [/] condition of door request switch (driver side). ndicates [/] condition of door request switch (passenger side). This is displayed even when it is not equipped. This is displayed even when it is not equipped. ndicates [/] condition of back door request switch. ndicates [/] condition of power switch ndicates [/] condition of driver door U status. ndicates [/] condition of front door switch (driver side). ndicates [/] condition of front door switch (passenger side). ndicates [/] condition of rear door switch R. ndicates [/] condition of rear door switch. ndicates [/] condition of back door switch. ndicates [/] condition of lock signal from door lock/unlock switch. ndicates [/] condition of unlock signal from door lock/unlock switch. ndicates [/] condition of lock signal from door key cylinder. ndicates [/] condition of unlock signal from door key cylinder. ndicates [/] condition of back door opener switch. This is displayed even when it is not equipped. ndicates [/] condition of signal from ntelligent ey. ndicates [/] condition of U signal from ntelligent ey. This is displayed even when it is not equipped. S S-29

30 < SYSTM SRT > TV TST SS SYSTM () TT Test tem V SURTY R M() SR RT WR RT WR : SUT unction ( - RT WR) T MTR This test is able to check security indicator lamp operation. Security indicator lamp is turned on when on SUT screen is touched. This test is able to check horns operation. orns are activated for 0.5 seconds after on SUT screen is touched. This test is able to check headlamp operation. eadlamps are activated for 0.5 seconds after on SUT screen is touched. This test is able to check hazard warning lamp operation. azard warning lamps are activated after on SUT screen is touched. : Monitor tem R SW-R ndicates [/] condition of driver side door switch. R SW-S ndicates [/] condition of passenger side door switch. S UR S UR : SUT unction ( - S UR) : T MTR Monitor item [UT] US SW [/] isplays the status of the power switch (push switch) judged by. TV TST Test item RSSUR SW peration R RSSUR MTR This item is displayed, but not tested. R RSSUR MTR : SUT unction ( - R RSSUR M- TR) : T TM SUT performs the following functions via communication with. iagnosis mode Self iagnostic Result ata Monitor ctive Test Work Support S ST RSUT Refer to S-54, "T ndex". T MTR M S-30 unction Retrieve T from U and display diagnostic items. Monitor the input/output signal of the control unit in real time. Send the drive signal from SUT to the actuator.the operation check can be performed. This mode enables a technician to adjust some devices faster and more accurately.

31 < SYSTM SRT > R RSS (ka, bar, kg/cm2 or si) R RSS R (ka, bar, kg/cm2 or si) R RSS RR (ka, bar, kg/cm2 or si) R RSS R (ka, bar, kg/cm2 or si) RST 1 (Yet, one) RST R1 (Yet, one) RST RR1 (Yet, one) RST R1 (Yet, one) WR M (/) UZZR (/) Monitor item (Unit) SS SYSTM () Tire pressure Registration ow tire pressure warning lamp Remarks This item is displayed, but cannot be use this item. TV TST M fter completing the work below, perform an active test. 1. heck registration state and perform self-diagnosis. 2. rase the self-diagnosis result history. tem WR M RST WR RU T TR W/ RU T/T WR UZZR SR R WR SURT tem R RST ow tire pressure warning lamp can be turned arbitrarily. isplayed but not used in TMS. isplayed but not used in TMS. isplayed but not used in TMS. Turn signal lamps can be turned arbitrarily. This test is able to check to check that the horn sounds. Registered tire pressure sensor can be displayed. Tire pressure sensor can be registered. S S-31

32 < U SS RMT > U SS RMT Reference Value : VUS T SS T SUT MTR TM R WR R WR W R WSR SW R WR T R WR ST Monitor tem ondition Value/Status ther than front wiper switch ront wiper switch ther than front wiper switch ront wiper switch ront washer switch ront washer switch ther than front wiper switch T ront wiper switch T ront wiper is not in ST position ront wiper is in ST position T VUM Wiper volume dial is in a dial position 1-7 RR WR RR WR T RR WSR SW RR WR ST TUR S R TUR S T M SW M SW M SW 1 M SW 2 SS SW UT T SW R SW ther than rear wiper switch Rear wiper switch ther than rear wiper switch T Rear wiper switch T Rear washer switch Rear washer switch Rear wiper is in ST position Rear wiper is not in ST position ther than turn signal switch R Turn signal switch R ther than turn signal switch Turn signal switch ther than lighting switch 1ST and 2 ighting switch 1ST or 2 ther than lighting switch ighting switch ther than lighting switch 2 ighting switch 2 ther than lighting switch 2 ighting switch 2 ther than lighting switch SS ighting switch SS ther than lighting switch UT ighting switch UT ront fog lamp switch ront fog lamp switch Wiper volume dial position S-32