HAYES ORIGINAL FLYWHEEL COUPLINGS
|
|
|
- Meagan Ryan
- 5 years ago
- Views:
Transcription
1 HAYES ORIGINAL FLYWHEEL COUPLINGS
2 Original Flywheel Couplings There are thousands of Hayes Original Flywheel Couplings in service throughout the world. They are used in gas and tough diesel engine applications where torsional vibration occurs. Our flexible neoprene elements absorb vibration and reduce shock loads, while providing a steady dampening effect. Hayes couplings take up very little space while transmitting a surprising amount of torque. They re available with a wide variety of spline and bores & keys that come ready to bolt to your flywheel. The splines do not lock onto the shaft in order to allow for any axial movement. This is similar to a drive shaft assembly in automotive applications. All components have been designed for maximum life (when operated at normal engine speeds, torque, alignment, and appropriately serviced). Please call your local distributor or our factory for assistance. Design Characteristics: Steel Yellow Zinc (Trivalent by ) Flywheel Plate Sturdy, steel plate for continuous load support Yellow Zinc (Trivalent by ) plating to protect against corrosive wear Drive Hub Precision machined for consistent quality Heat-treated splines to prevent premature shaft wear Two set screws for clamping bore and key applications Large driving surfaces for easy installation and longer drive life Splined and bore and key options for your specific applications Multiple hub lengths allow for easy installation in any standard SAE or non-standard application Features and Advantages: Absorbs vibration and shock loads to optimize the life of your pump components Provides a steady dampening effect under load Rugged steel construction Eliminates human error with our easy, one-piece design (perfect for a production environment)! Operating temperatures: -40 to +220 F Various series for standard SAE flywheels and non-standard flywheels (including engine housings) Competitively priced and normally in stock Spline lubrication including the coupling assembly Applications: Our one-piece coupling is used on off-highway construction equipment Aerial lifts, bucket loaders, skid-steer loaders, excavators, sweepers, wheeled loaders, and more. Consult factory for applications not listed CALL US TO DISCUSS YOUR SPECIFIC APPLICATION REQUIREMENTS
3 Custom Flywheel Plate Yellow Zinc Plated Drive Bushings Hayes Drive Inserts Drive Hub Standard or Custom Spline/Bore & Key Drives
4 Standard SAE Flywheel Coupling and Pump Mount Information
5 Standard SAE Pump Information
6 Easy fill in the blank coupling specification (Just fill in then or fax) Name: Company: Phone: DIAMETER DIAMETER DIAMETER 4-BOLT PUMP FACE 2-BOLT PUMP FACE FLYWHEEL DATA MOUNTING FACE STANDARD DATA KEY SHAFT DIA FLYWHEEL HOUSING DATA SHAFT LENGTH SHAFT DIA FULL KEY/SPLINE LENGTH PILOT LENGTH SPLINE DATA O.D. # OF TEETH D.P. P.A. FLYWHEEL TO HOUSING FULL LENGTH SPLINE/KEYWAY PILOT LENGTH SHAFT LENGTH BACKSET PUMP SHAFT INFORMATION SAE FLYWHEEL SAE HOUSING SAE FLYWHEEL O.D. SAE HOUSING BACKSET
A l t r a I n d u s t r i a l M o t i o n. FBA Flywheel Couplings
A l t r a I n d u s t r i a l M o t i o n FBA Flywheel Couplings Guardian Couplings I FBA Flywheel Couplings TECHNICAL DATA The FBA (flywheel-blind assembly) was designed in response to the demand for
MORFLEX COUPLINGS Double MORFLEX Series CC Hub and Block Assemblies Round steel flanges
MORFLEX COUPLINGS The MORFLEX coupling should be installed where considerable dimensional misalignment may result, or is expected. It also cushions shock loads and absorbs vibration. The MORFLEX coupling
50 years of Reliable Field History
Coupling Comments The No Maintenance, Easy Assembly, Resilient Coupling with High Angular Misalignment up to 10 degrees Center Assembly 70 Deg. Neoprene Rubber in Compression Grade 5 Bolts Steel Flanges
Air Champ RPM DPC-15T DPC-13T DPC-11T DPC-11T DPC-9T DPC-9T DPC-9T DPC-9T DPC-9T DPC-9T DPC-9T DPC-9T DPC-9T DPC-9T DPC-9T DPC-9T DPC-9T DPC-9T
DUAL PLATE FRICTION CLUTCH SELECTION CHART Friction clutch recommendation is based upon air pressure of 50 psi, transmitted horsepower and speed. RPM 100 200 300 400 500 600 700 800 900 1000 1100 1200
A l t r a I n d u s t r i a l M o t i o n. DELTA Series Cost-Effective Solutions for Diesel-Driven Hydrostatic Machinery
A l t r a I n d u s t r i a l M o t i o n DELTA Series Cost-Effective Solutions for Diesel-Driven Hydrostatic Machinery Guardian Couplings I DELTA Series ABOUT GUARDIAN COUPLINGS For more than 70 years,
Disc Valve Hydraulic Motors 4000 Compact Series
Disc Valve Hydraulic Motors 10.2014 inspired hydraulics. Änderungen und Druckfehler vorbehalten 10.2014 EN EATON_Motoren english Port B Port A Features Shuttle Valve with Back- Pressure Relief Valve Highlights
Premium Flexible Drive Couplings
Premium Flexible Drive Couplings agnaloy is the original lightweight, heavy-duty flexible drive coupling. Light weight magnesium construction makes agnaloy couplings 76% lighter than cast iron and 36%
Advanced Auto Tech. ASE A 3 Test Preparation Clutch & Drive Line Service
Advanced Auto Tech ASE A 3 Test Preparation Clutch & Drive Line Service The clutch and the drive line both have their own unique symptoms and noises, separate from the transmissions used to change torque
TORQUE LIMITERS 211CDW 221CDW 231CDW 241CDW. Ball Detent Style THE ULTIMATE PROTECTION CARLSON-DIMOND & WRIGHT, INC.
TORQUE LIMITERS Ball Detent Style 211CDW 221CDW 231CDW 241CDW THE ULTIMATE PROTECTION CARLSON-DIMOND & WRIGHT, INC. CDWdrives Torque Limiters Protect your equipment from costly downtime! 1 2 3 4 7 5 Features
COUPLINGS HRC FLEXIBLE COUPLINGS CHAIN SHAFT COUPLINGS SPLINE CLUTCHES TORQUE LIMITERS TORQUE LIMITER COUPLINGS
COUPLINGS HRC FLEXIBLE COUPLINGS CHAIN SHAFT COUPLINGS SPLINE CLUTCHES TORQUE LIMITERS TORQUE LIMITER COUPLINGS FLEXIBLE COUPLINGS HRC TYPE Hercus HRC Couplings are designed for general-purpose applications
Vickers. Piston Motors. Inline Piston Motors. Fixed and Variable Displacement. Revised 5/99 691
Vickers Piston Motors Inline Piston Motors Fixed and Variable Displacement Revised 5/99 691 Table of Contents Introduction........................................................................................
Disc Valve Hydraulic Motors
Disc Valve Hydraulic Motors State of the art motors benefiting from years of experience and inovating constantly to fit your demands. C-i Disc Valve Hydraulic Motors Highlights Product Description In the
Size 00 Size 0-5 Size 6-8. Technical Data. Setscrew 1TF 2TF 3TF 3) 2) R Pilot bore max.
Standard for a torque range up to 6800 Nm Standard zinc-coated and yellow passivated ting possible while in place Asbestos-free and rust-resistant friction linings Securing of the setting nut by locking
L Jaw Type Couplings. Coupling Selection Example
Coupling Selection Example A coupling is required to drive a pulp grinder from a 0 RPM, 20HP, 26TC motor approximately 6 hours per day. Motor shaft is 8 diameter with a 8 key and grinder shaft is 8 diameter
CRANKSHAFT. Preceding Works: Removal of end cover Removal of pistons Removal of crankshaft sprocket
30 02 CRANKSHAFT Preceding Works: Removal of end cover Removal of pistons Removal of crankshaft sprocket 1. Crankshaft main bearing shells, upper 2. Upper thrust bearing 3. Crankshaft 4. Crankshaft main
10,000 Series. Highlights C-6
Highlights Features higher flows Benefits demanding mobile and industrial applications from Applications Description This is the biggest disc valve motor of our line with up to 45 GPM and 24,000 in-lb
Disc Valve Hydraulic Motors 2000 Series
Disc Valve Hydraulic Motors 10.2014 inspired hydraulics. Änderungen und Druckfehler vorbehalten 10.2014 EN EATON_Motoren english Highlights Port A Features Three zone design for longer life and true bi-directionality.
HK Series - 2 Way 1HK to 8 HK 1 8" to 1" Body
HK Series - 2 Way 1HK to 8 HK 1 8" to 1" Body Series HK Couplings are designed for general purpose hydraulic service. Some are suitable for use with various liquids, chemicals, steam, gases, and vacuum.
Funk Modular Pump Drives Selection Guide. The simplest solutions are also the most reliable
Funk Modular Pump Drives Selection Guide The simplest solutions are also the most reliable Funk Modular Pump Drives Built stronger and smarter from the inside out Modular hydraulic pump drives When you
TRANSMISSIONS MANUAL
DMR-5023 Stick shift pilot bearing. Knurled for sure fit, self aligning for perfect fit and smooth running and shift. Fits ant GM manual stick transmission crank. Allows GM transmission in Ford cars. DMR-5022
Application Information
12.13 4.69 3.03 3.63.94 1.25 (4) 13/16 DIA HOLES 5.25 5.00 11.50 10.00 4.00 5.50 2.00 MODEL RD48 4-7/8 Center Distance 30/1 or 45/1 Ratio 4.876 22.5 45 30,000 in-lb operating 2.56 (6) 1/2NC HOLES.35.38
VIS (Valve-In-Star) Hydraulic Motor
VIS (Valve-In-Star) Hydraulic Motor VIS 30 Series VIS 40 Series VIS 45 Series The next step in the evolution of low speed high torque (LSHT) hydraulic motors. EATON Low Speed High Torque Motors E-MOLO-MC001-E5
AUGERS For Skid-Steer Loaders, Compact Tractors, Mini Compact Loaders, Excavators, Mini Excavators, Tractor Loader Backhoes and Telehandlers
AUGERS For Skid-Steer Loaders, Compact Tractors, Mini Compact Loaders, Excavators, Mini Excavators, Tractor Loader Backhoes and Telehandlers The McMillen Auger Drives by Paladin, feature a wide variety
6000 Series Highlights
Highlights Features 9 displacements available Presents a multitude of options that make this motor very smart and flexible to apply Benefits Very tough motor for demanding applications Can be used in a
Funk Drivetrain Components Mechanical Drivetrain. Reliable power over any terrain
Funk Drivetrain Components Mechanical Drivetrain Reliable power over any terrain Axles Inboard planetary axles for tough jobs John Deere inboard planetary axles are as tough as they come When workloads
Assortment 2013_FPT BOOK.indb /02/13 6:57 PM
Assortment Contents Why compete against your supplier when you can be our partner Chain Tensioners...14 see Chains section for details Anti-Vibration Mounts...224 Key Steel...225 Motor Rails...226 Self
JACKS: **A-FRAME **STEMS **SWIVEL **RACK **MARINE **ACCESSORIES BUTLER BUILT * BUTLER TOUGH QUALITY, PERFORMANCE AND DEPENDABILITY FOR 50 YEARS
JACKS: **A-FRAME **STEMS **SWIVEL **RACK **MARINE **ACCESSORIES BUTLER BUILT * BUTLER TOUGH QUALITY, PERFORMANCE AND DEPENDABILITY FOR 50 YEARS PAGE 800-1 A-FRAME JACKS / JACK STEMS Butler A-Frame Jacks
Magnesium Option, Late Model Front Seal, Viton, P/N 67256V Rear Seal, Viton, P/N 67257V Shifter Installed Heat Treated Yoke, P/N
DESCRIPTION OPTION Magnesium Option, Late Model 80100L Front Seal, Viton, P/N 67256V 80109 Rear Seal, Viton, P/N 67257V 80110L Shifter Installed 80112L Heat Treated Yoke, P/N 62946-6 80119-6 Heat Treated
Agricultural Chain ISO 487/DIN 8189 and Works Standard
ISO 487/DIN 8189 and Works Standard 1 ISO 487 Connecting Links ISO STD Extra Pitch Pitch Inside Over Roller Pin Bush Over Plate Minimum Weight No No No No No No Strength Inch mm Width Inner Dia Dia Dia
Disc Valve Hydraulic Motors Series 6000
Disc Valve Hydraulic Motors Series 6000 10.2014 inspired hydraulics. Änderungen und Druckfehler vorbehalten 10.2014 EN EATON_Motoren english Highlights Features 9 displacements available Presents a multitude
AUGERS For Skid-Steer Loaders, Compact Tractors, Mini Compact Loaders, Excavators, Mini Excavators, Tractor Loader Backhoes and Telehandlers
AUGERS For Skid-Steer Loaders, Compact Tractors, Mini Compact Loaders, Excavators, Mini Excavators, Tractor Loader Backhoes and Telehandlers The McMillen Auger Drives by Paladin, feature a wide variety
Air Champ DPC-9T & DPC-11T Static Torque in Inch-Pounds. Air Pressure in PSI
CLUTCHES DPC SERIES DUAL PLATE CLUTCHES This Series, specified by component, allows you to custom design for specific application requirements: Static Torque capacity up to 36,000 In. Lbs. @ 80 psi Maximum
Rigid Couplings. P-1686-TBW 2/17... TB Wood s F7-1
Rigid Couplings F7 F7-1 AVS Series Couplings AVS Series (Adjustable Vertical Spacer) Coupling used for vertical turbine pumps No flexible element Integral nut used for infinite adjustment of pump turbine
(d) Bore Size Check from Dimensions table (page 112) that chosen flanges can accommodate required bores.
Fenaflex Couplings The Fenaflex coupling is a highly flexible, torsionally elastic coupling offering versatility to designers and engineers with a choice of flange combinations to suit most applications.
BoWex FLE-PA DBGM BoWex-ELASTIC DBP
BoWex FLE-PA DBGM BoWex-ELASTIC DBP Flange coupling for I. C.-engines BoWex BoWex-FLE-PA BoWex ELASTIC BoWex FLE-PA couplings are torsionally rigid curved-tooth flange couplings, made from a combination
6000 Series. Highlights C-5. Description With torque up to 15,000 in-lb and 40 gpm continuous, this motor is packed with power operates very smoothly.
Highlights Features 9 displacements available Presents a multitude of options that make this motor very smart and flexible to apply Benefits Very tough motor for demanding applications Can be used in a
Funk Modular Pump Drive Selection Guide
Funk Modular Pump Drive Selection Guide Built Stronger and Smarter from the Inside Out Modular hydraulic pump drives When you look inside a Funk hydraulic pump drive, you are seeing the result of over
404D-22 Industrial Diesel Engine
The Perkins 400 Series is an extensive family of engines in the 0.5-2.2 litre range. The 4 cylinder 404-22 model sits at the top of the 400 Series engine range. It combines high performance, low operating
AXLE BEAM REPLACEMENT SERVICE KITS
When sending out replacement axle beams, you must be sure to send the correct service kit for the beam size. Use the chart below to determine which service kit goes with which beam size. Illustrations
PVE 19 & 21 Piston Pumps
Engineering PVE 19 & 21 Piston Pumps Pressures to 3500 psi For Mobile and Industrial Use Same Day Shipments Rated for 2400 rpm > Speeds to 2400 rpm www.fluidynefp.com Table of Contents Introduction...2
A l t r a I n d u s t r i a l M o t i o n. Gear Grip
A l t r a I n d u s t r i a l M o t i o n Gear Grip Guardian Couplings I Gear Grip GUARDIAN COUPLINGS GEAR GRIP APPLICATIONS The Gear Grip product is a general use coupling best suited for applications
DIST. AUTORIZADO MEX (55) QRO (442) MTY (81)
The Coupling For Today s Most Difficult Applications. The CD Coupling is a unique hybrid coupling, combining the best features found in both steel disc and elastomeric couplings. Through its new open arm
ENGINEERING DATA. High Torque, Low Speed Motors H, S, 2000, 6000, and 10,000 Series. w w w. F l u i D y n e F P. c o m
ENGINEERING DATA High Torque, Low Speed Motors H, S, 2000, 6000, and 10,000 Series Interchangeable with: Charlynn White Ross Parker Danfoss w w w. INDEX Cross Reference Guide...2 Introduction...3 H-Series...4
MB-825 Flange Mounted
Motor Brake Normal Duty MB-825 Flange Mounted 1/4-20 UNC-3B (4) on 10.50 dia. 5/16-18 UNC-3B (8) holes equally spaced on 8.85 dia.* 2.68 4.359 1/2-13 UNC-2A (4) on.250 dia.* 10.50 10.50 10.000.156.062
1. General GENERAL CL-2
SYSTEM GENERAL 1. General The clutch is of a dry, single plate type with a diaphragm spring. The clutch is a push type clutch. When the pedal is depressed, the release bearing will press the center of
PowerGrip Timing Belt Drives
PowerGrip Timing Belt Drives Single Sided Belt Drive Systems PowerGrip Timing Belt drives operate on the tooth-grip principle, with the molded teeth the belt designed to make positive engagement with the
DURST. Over 3 hr. per day and incl.
pump drive selection guide Max. Max Input Input Flywheel Ratio Pump Pump Centre Approx. HP* Torque Style# Housing Inc. OR Dec. Adaptors Distance Weight Model (kw) Lb.ft (nm) Size kg 1PD06 495 1040 P,S
Selection Tool. on the Internet at in the section MÄDLER -Tools. Other sizes and designs on request. Connecting Shafts Page 766
Couplings Overview Friction Clutches Friction Clutches Type B Axial Arrangement Friction Clutches Type C Transversal Flexibility Sliding Hubs with Torsionally-Flexible Coupling Multi-Disk Friction Clutches
PLASTICS INDEX...L-1 PLASTIC CAPABILITIES...L-2
Index SECTION L PRODUCT PAGE INDEX...L-1 PLASTIC CAPABILITIES...L-2 SECTION I NON-METALLIC SPROCKETS...L-3 - L-12 Sprockets - Stock No. 25 1/4" Pitch...L-3 No. 35 3/8" Pitch...L-4 No. 40 1/2" Pitch...L-5
Veljan Gear Pumps. 'B' Series Features:
'' Series Features: Self-priming pumps Heavy duty sleeve bushing design in a small frame size Displacements from 9.8cc/rev to 39.9cc/rev Working pressures up to bar Speeds up to rpm Flows up to 10.5gpm
FARM PRODUCTS & ACCESSORIES
FARM PRODUCTS & ACCESSORIES Farm Products & Accessories Features... Q-2 Safety Warnings... Q-4, Q-11 P. T. O. Adaptors Splined Standard Duty to 75 HP... Q-6 Splined Heavy Duty to 125 HP... Q-6 Kwik-D-Tach
There s no better choice than Premier.
There s no better choice than Premier. PREMIER POWER Premier Agricultural Attachments are designed to utilize the power of the host machine most efficiently, turning them into high performance work tools.
PRODUCT MANUAL TYRE-FLEX COUPLING (T,TO & RST)
RATHI TRANSPOWER PVT. LTD. PUNE - INDIA PRODUCT MANUAL TYRE-FLEX COUPLING (T,TO & RST) R-PM-T-1/3-1/14 Page 1 INDEX CONTENTS PAGE Standard Features 3 At a Glance 3 TYRE-FLEX Family 3 Elastomer Information
GRAIN platform KITS. grain platform kits & 2020 Header adapter kits. 4 harvesting product support
GRAIN platform KITS GRAIN HEADER COMPLETING KITS 2010 & 2020 Header adapter kits Application: 2100/2300 Series Combines conversion kits Includes: Weldment and mounting hardware for header frame only 87362290:
Michelin X Tweel Airless Radial Tire Family
Michelin X Tweel Airless Radial Tire Family What is a Michelin X Tweel Airless Radial Tire? No Maintenance The MICHELIN X TWEEL airless radial tire is one single unit, replacing the current tire and wheel
CENTER-BONDED MOUNTS. Center-Bonded Mounts. Page 51 of 124
Page 51 of 124 Center-Bonded Mounts Featuring: CB-1100 Series CB-1180 Series CBA Series CBA-50 Series STA Series Safetied Tubeform Series LORD Center-Bonded Mounts isolate vibration, control shock and
Manufacturers of Marine Gears, Clutches, Torsional Couplings and Brake Systems
Manufacturers of Marine Gears, Clutches, Torsional Couplings and Brake Systems Gears FMCV/FMCH 2 GMCV/GMCH 4 HRV/HRH 6 DRV/DRI 8 Couplings HRC 12 HRC (continued) 14 HEMD 16 HEZ 17 Clutches TB 18 TR 20
FLEXIBLE DRIVE COUPLINGS
To order this part, call Lifco Hydraulics USA Toll Free at -800-92-849 V C Why You Should Specify Vescor Flexible s. Vescor uses stronger materials. Because flexible couplings are subjected to constant
Gear Housing Widths 1.00" 1.25" 1.50" 1.75" 2.00" 2.25" 2.50" Gear Housing Widths / Flow Rate [ VGP - D Series ]
![Gear Housing Widths 1.00 1.25 1.50 1.75 2.00 2.25 2.50 Gear Housing Widths / Flow Rate [ VGP - D Series ]](/thumbs/76/74105930.jpg "Gear Housing Widths 1.00 1.25 1.50 1.75 2.00 2.25 2.50 Gear Housing Widths / Flow Rate [ VGP - D Series ]")
'D' Series Features:- Heavy duty sleeve bushing design in a small frame size Displacements from 20.6cc/rev to 104.2cc/rev Working pressures up to 240bar Speeds up to 3500rpm Flows up to 27.5gpm High strength
Complete Component Catalog
Complete Component Catalog Valuepart for the Best in Quality Valuepart is committed to providing customers with the Highest Quality products available in the industry. Rigid Quality and Application standards
CONTENTS. 45 GGN Black Nitrate Gas Springs 46 GGS Chrome Plated Rod Gas Springs
45 GGN Black Nitrate Gas Springs 46 GGS Chrome Plated Rod Gas Springs 47 STS-316L Stainless Steel Gas Spring 48 ECL-SafeLock Gas Springs 48 Self-Centering Dampers CONTENTS 49 Dampers 50 End Fittings 50
Veljan Gear Pumps. E' Series Features:-
E' Series Features:- Heavy duty sleeve bushing design in a small frame size Displacements from 43.5cc/rev to 146.5cc/rev Working pressures up to 240bar Speeds up to 3500rpm Flows up to 38.7gpm High strength
Cat. Hammers H35E, H45E, H55E, H65E
Cat Hammers H35Es, H45Es, H55Es, H65Es H35E, H45E, H55E, H65E Features: Built for Your Convenience, Comfort Cat Hammers are designed for optimum performance and integration with your Cat compact construction
RBH65 BACKHOE LOADER
RBH65 BACKHOE LOADER Shift productivity into a higher gear. 1 2 3 Whether you're digging, trenching, back-filling or handling material, we have a Rhino Backhoe Loader to meet your needs. Rhino Backhoe
Products Catalogue. Quality Guaranteed
Products Catalogue CHAINS The GB range of Chains, Sprockets, Couplings and Pulleys has evolved from 20 years expertise in the importation and sale of the products locally in the Australia. The GB range
Self-Adjust Clutch Installation Guide
Self-Adjust Clutch Installation Guide 0 STOP! READ CAREFULLY BEFORE INSTALLING CLUTCH This clutch must be installed by a qualified installer. Improper installation or failure to replace or resurface the
Boxer 700HDX Parts Manual
BIG POWER IN ALL PLACES Phone: Sales - 800-831-0042, Parts and Service - 800-255-8839 www.boxerequipment.com Boxer 700HDX Parts Manual SN 5082 and Higher Part No. 76345-820 Manufactured by: Morbark, LLC.
403D-17 Industrial Diesel Engine
The Perkins 400 Series is an extensive family of engines in the 0.5-2.2 litre range. The 3 cylinder 403-17 model is a mid-range 400 Series engine, combining performance, low operating costs and a compact
PRODUCT GUIDE. ENGLISH ISSUE 12-1 AUGER TORQUE EUROPE LTD
PRODUCT GUIDE ENGLISH AUGER TORQUE EUROPE LTD ISSUE 12-1 www.augertorque.com A Customer-Driven Global Company Established in Europe in 1998, Auger Torque has created a new standard in the Earth Drill and
403D-15 Industrial Diesel Engine
The Perkins 400 Series is an extensive family of engines in the 0.5-2.2 litre range. The 3 cylinder 403-15 model is the mid-range 400 Series engine, combining performance, low operating costs and a compact
POWER TAKE-OFF SERIES
Kwa-Zulu Natal: 9 Clubhouse Place, Westmead, Pinetown PO Box 1076, Pinetown, 3600, South Africa Western Cape: Saxenburg Road, Blackheath, Cape Town PO Box 281 Kuilsriver, 7579, South Africa Gauteng: 48
ATASA 5 th Study Guide Chapter 36 Pages Clutches 74 Points. Clutches. Be Certain to Read the Summary
ATASA 5 th Study Guide Chapter 36 Pages 1071 1091 74 Points Be Certain to Read the Summary 1. The provides a mechanical coupling between the engine s & the transmission s shaft. The clutch allows the engine
403D-11 Industrial Diesel Engine
The Perkins 400 Series is an extensive family of engines in the 0.5-2.2 litre range. The 3 cylinder 403-11 model is one of Perkins smallest engines, combining performance, low operating costs and an ultra-compact
Torsionally rigid flange couplings
Axial plug-in, maintenance-free, torsionally rigid For legend of pictogram please refer to flapper on the cover 130 Size Size Pilot bore Finish bore d Technical data of BoWex FLE-PA Torques/Weights/Mass
KTR Torque Limiters Overload Protection Systems
KT Torque Limiters Overload Protection Systems UFLEX - Friction Disk - Zero Backlash Ball Detent KT SI - Ball/oller Bearing Style KT SI Compact - Zero Backlash Ball Detent Catalog Contents (Metric) Page
Clutch Products Worldwide Leader in OE Clutch Manufacturing. Medium Duty Kits Picture Guide. Bringing OE to the Aftermarket
Part No. CAT-PAS2009 October 2009 2009-10 Worldwide Leader in OE Clutch Manufacturing Clutch Products Medium Duty Kits Picture Guide Valeo Transmissions 310 E Street Hampton, VA 23661 USA Valeo Hotline:
500 Series C Crawler
International Harvester Service Manual 500 Series C Crawler Service Manual THIS IS A MANUAL PRODUCED BY JENSALES INC. WITHOUT THE AUTHORIZATION OF INTERNATIONAL HARVESTER OR IT S SUCCESSORS. INTERNATIONAL
LATERAL LIMITER KIT TORSION BAR KIT
C42-429 C42-427 LATERAL LIMITER KIT Controls engine and transmission movement during hard acceleration or braking. With 4130 chromoly tubing and brackets, this kit is recommended when using motor plates.
V10 & V20 Single Vane Pump
ENGINEERING DATA V10 & V20 Single Vane Pump Versatile Reliable High Performance Low Cost w w w. F l u i D y n e F P. c o m E m a i l : c s @ F l u i D y n e F P. c o m V10 & V20 Single Vane Pump Versatile
TPV Variable Displacement Closed Loop System Axial Piston Pump HY-TRANS THE PRODUCTION LINE OF HANSA-TMP HT 16 / M / 501 / 1009 / E
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES HY-TRANS THE PRODUCTION LINE OF HANSA-TMP Via M. L. King, 6-41122 MODENA (ITALY) Tel: +39 059 415 711 Fax: +39 059 415 729 / 059 415
Disc Valve Hydraulic Motors Series 4000
Disc Valve Hydraulic Motors Series 0 10.20 inspired hydraulics. Änderungen und Druckfehler vorbehalten 10.20 EN EATON_Motoren english Highlights Features 10 displacements, a variety of mounting flanges
Taper Bore Sprockets. Sprockets. 06B 3/8" x 7/32" BS Taper Bore Sprockets. c r 3. SPROCKET mm CHAIN mm Tooth Radius r 3
Sprokets Taper Bore Sprokets BS Taper Bore Sprokets 06B 3/8" x 7/32" SPROCKET mm CHIN mm Tooth Radius 10.0 Pith 9.525 Chamfer 1.0 Width Between Inner Plates 5.720 Tooth Width b1 5.2 Roller Diameter 6.350
CLUTCH 6-1 CLUTCH CONTENTS
TJ CLUTCH 6-1 CLUTCH CONTENTS page GENERAL INFORMATION CLUTCH COMPONENTS... 1 INSTALLATION METHODS AND PARTS USAGE... 1 DESCRIPTION AND OPERATION CLUTCH OPERATION... 1 DIAGNOSIS AND TESTING DIAGNOSTIC
BoWex FLE-PA. BoWex FLE-PAC. KTR-N Sheet: Edition: EN 1 of BoWex FLE-PA / FLE-PAC Operating/Assembly instructions
1 of 17 is a torsionally rigid flange coupling. It is able to compensate for shaft misalignment, for example caused by manufacturing inaccuracies, thermal expansion, etc. BoWex FLE-PA BoWex FLE-PAC Drawn:
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES HT 12 / A / 551 / 0911 / E
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES HT 12 / A / 551 / 0911 / E Speed-up and Splitter Gearboxes Contents General Information 4-5 Speed-up Gearboxes Series 60000-10 kw
Neoprene. Steel or Brass
The low air inclusion product line is designed for air conditioning, refrigerant, gaseous and fluid transfer applications. Product Features connections for versatility of installation on tubing or hose
RFC SPECIALTY LOCKING DEVICES
RINGFEDER Products are available from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA email: sales@mdmetric.com web: http://mdmetric.com phones: (410)358-3130 (800)638-1830 faxes: (410)358-3142
Power Ditchers, Bale Slicer, Rock Picker, Screening Bucket
Model 400 Power Ditchers Model 600 Bale Slicer Model 500 Rock Picker Model 700 Screening Bucket remlingermfg.com ISO9001:2015 certified Our Tradition is Quality Driven and Field Proven Power Ditchers,
8.23F 10.23D ARTICULATED BACKHOE LOADERS
8.23F 10.23D ARTICULATED BACKHOE LOADERS VENIERI ARTICULATED BACKHOE LOADER EXPECT THE BEST. The equal distribution of the loading on axles and the project research to have the lowest possible barycentre,
ROSTA Tensioner Devices
33 Tensioning Technology Chain Tensioning Roller chains are power transmission components with positive transmission which, by virtue of their design are subject, depending on quality, to elongation as
Rugged and versatile. Demag LRS travel wheel system
Rugged and versatile Demag LRS travel wheel system Demag LRS travel wheel system ready for installation TAILORED TO YOUR NEEDS TO CUT YOUR DESIGN COSTS Using the Demag LRS travel wheel system, you can
4500/4600/4300 SERIES KEY IN LEVER LOCKSETS. ainsborough now offers a broad selection of key in lever lockset
4500/4600/4300 SERIES ainsborough now offers a broad selection of key in lever lockset G designs, from the 4500 and 4600 Series to the newly released 4300 Series range. The 4500 and 4600 Series key in
BoWex Curved-tooth gear coupling, shaft coupling. BoWex-ELASTIC High flexible flange coupling. MONOLASTIC Single-part, flexible flange coupling
Curved-tooth gear coupling, shaft coupling Torsionally rigid flange coupling U.S. Patent 5,586,938 High flexible flange coupling Single-part, flexible flange coupling EP 0853203 U.S. Patent 6,117,017 Pump
Guardian FH Flywheel Coupling
Guardian FH Flywheel Coupling P-8606-GC GUA-MRK-DOC-015 Service & Installation Instructions TABLE OF CONTENTS NOTICES AND WARNINGS PAGE 2 SECTION 1 COUPLING OVERVIEW PAGE 3 SECTION 2 TOOLS/MATERIALS REQUIRED
1. Axial Piston Pumps
Axial Piston Pumps 1. Axial Piston Pumps Series Model Maximum Operating Pressure Maximum Displacement Remarks Page PSI In 3 /rev PV & PVM & PVR Premier Worldcup Goldcup PV6 4500 0.88 PV10 4500 1.26 PV15
F Series Drive Shafts, SMV and Miscellaneous Series Drive Shafts and Related Components
Page - 800 Series Drive Shafts and Related Components 800 Series Drive Shafts and Tube ssemblies (800 Series) 800 Series Drive Shafts, SMV and Miscellaneous 4 Slow Moving Vehicle Signs 5 Skid Loader and
Breakers Plate Compactors Compaction Wheels
Breakers Plate Compactors Compaction Wheels Strike Force tools by Paladin provide exceptional performance and reliability for a variety of tasks. Paladin Attachments is your one-stop-shop for maximum productivity.
WIRE AND WIRE ROPE DIVISION
WIRE AND WIRE ROPE DIVISION Pulley & Sheave Product Catalog www.loosco.com Pulleys and 1 V0117 Table of Contents About this catalog...3 Military Specification Technical Information...4 Military Specification
FLEXIBLE COUPLINGS - RIGID COUPLINGS Up to Nm of torque and 205 mm bores
Edition 10/2014 www.comintec.it FLEXIBLE COUPLINGS - RIGID COUPLINGS Up to 130.000 Nm of torque and 205 mm bores (BACKLASH FREE) Technology for Safety FLEXIBLE COUPLINGS - RIGID COUPLINGS (BACKLASH FREE):
FLEXIRIDE Rubber Torsion Axles
Universal Group FLEXIRIDE Rubber Torsion Axles One Piece Spindle Arm Superior one piece forging design is safer and stronger than welded units. Splined spindle arm is adjustable for a range of starting