CYLINDERS DOUBLE ACTING & SPRING RETURN: 7/8-4 BORES CYLINDERS
|
|
- Maryann McCarthy
- 5 years ago
- Views:
Transcription
1 LIRS OUL TI & SPRI RTUR: - 4 ORS LIRS 8
2 LIRS LL SLS R U- TMPR- TUR R O -40 to LO LI STL SWIVL USI SRW MI I TSIL LUMIUM S SI TURS & MTRILS RSS OR STILSS TUI PRISIO O (16 MIRO OR TTR) OR SIZ ROUSS WIT RS T LURIT RTII PTTR I TSIL LUMIUM PISTO (S PISTO SL OSTRUTIOS LOW) IL-PROV LOK UT SURL OLS PISTO TO RO. & ORS V PISTOS TR OTO RO SL WIT LOTIT & STK SI OSTRUTIO (OUL TI) TP SIL ll Type ylinders, These all-purpose units are used for most pneumatic applications. Optional ouble Rod Packings are recommended for heavy duty and hydraulic applications, not available on & ores. OR IMSIOS & MOUTS S PS Pressure Rating: 150 P.S.I. Pneumatic, 350 P.S.I. ydraulic. reakaway: pproximately 5 to 8 P.S.I. ore Sizes vailable:,, 1-1/,, 2-1/, 3. TP SIL Type ylinders are constructed using low friction U up Seals and include a wear strip on the piston with the exception of the 4 (it has no wear strip). These ylinders are primarily used on low pressure applications and where low minimum breakaway is required. Pressure Rating: 150 P.S.I. Pneumatic only. reakaway: pproximately 2 to 3 P.S.I. ore Sizes vailable:,, 1-1/,, 2-1/, 3 & 4. TP SIL Type ylinders are constructed using lock-vee Seals and include double rod seals in the front head except on the & ores. heavy duty wear strip (bearing) on the piston minimizes friction and piston seal wear side load conditions prevents metal-to-metal contact. These ylinders are generally used on low pressure hydraulics and where side load conditions are present. Pressure Rating: 200 P.S.I. Pneumatic, 500 P.S.I. ydraulic. reakaway: pproximately 10 to 15 P.S.I. ore Sizes vailable:,, 1-1/,, 2-1/, 3 & 4. 5 OR VILL-onsult actory for etails. TRML LOW RITIO, LO LI LO, SP-I RI LTR K-UP RI IS I KPI RO L ROU POLIS 416 STILSS STL R WIT WR LTS ZI PLT R RTII RIS, ROU LT PRLLL, OL S SQUR TO OR OR IMSIOS MOUTS S PS 17 thru 21. OR IMSIOS MOUTS S PS 17 thru 21. OR IMSIOS MOUTS S PS 17 thru 21. OUL TI & SPRI RTUR: - 4 ORS 9
3 LIRS OUL TI & SPRI RTUR: - 4 ORS 10 STR VRITIOS O TPS, & The basic construction of these standard variations is respectively identical to Types, or, except where noted. OUL : TPS, & These ylinders are constructed with a common single rod, which protrudes from both ends. s one end retracts, the other extends. ore Sizes vailable:,, 1-1/,, 2-1/, 3 & 4. Maximum Stroke vailable: 65. OT: ue to piston construction, 3/3 of stroke is lost on Type 1-1/,, 2-1/ and 3 bore sizes. K-TO-K: TPS, & These units consist of two separate single ended ylinders, joined together by a common rear head. Their strokes can be either identical or different. y fastening one rod end to a fixed object, these units can perform as 3 and 4 position ylinders. ore Sizes vailable:,, 1-1/,, 2-1/, 3 & 4. OT: Options must be indicated for each stroke. ITRL RR SWIVL: TPS, & These ylinders are constructed with a female clevis end, including clevis pin. ore Sizes vailable:,, 1-1/,, 2-1/, 3 & 4. O ROTTI - TP R Internal guide rods. ore Sizes vailable:, 3 and 4 ITRL SQUR : TPS S, S & SPS TPS S, S & S These units incorporate the use of square heads, thus eliminating the need for separate oot Mounts. ore Sizes vailable:,, 1-1/,. OT: ue to piston construction, 3/3 of stroke is lost on Type S 1-1/ and bore sizes.
4 LIRS TR PITIO: TPS: P, P & P SIL TPS: P, P & P OUL These ylinders feature two separate piston rod assemblies which provide three definite and positive positions. ny combination of first stroke and total stroke is available. oth rods fully retracted is first position. Port #1 xtends rod first stroke to second position. Port #2 xtends rod full stroke to third position. Port #3 Retracts both rods to first position. When ordering, second stroke must be specified as total stroke, as second ylinder rod moves through both strokes. or example, if first stroke required is 4 and second stroke is, order should read: P-3x4x6. 6 being the total stroke (4+2). ore Sizes vailable: 1-1/,, 2-1/, 3 & 4. OT: Options must be indicated for each stroke. TM: TP: T SIL TP: T OUL The basic construction of these ylinders is identical to Type and feature two ylinders in tandem having two pistons mounted on one common rod. Pneumatic operation with hydraulic control can be obtained by operating the rear ylinder pneumatically and filling the front ylinder with oil and piping its ports in series using a flow control valve. The output force of a single ylinder can be almost doubled using a Tandem ylinder and piping both rear ports together and both front ports together, which will apply the working pressure to both ylinders at the same time. This is particularly useful when space limitations preclude the use of large bore ylinders, and the force required is greater than that supplied by smaller bore units. ore Sizes vailable: 1-1/,, 2-1/, 3 & 4. Maximum Stroke vailable: Type T : 60. Type T : 40. ORRI PROUR MPL: -3 x 4--TP-I--R...ushion oth nds TP...igh Temperature (Viton) Seals I... ccessory Pin installed in both ends...oversized Rod R...Outboard Rod uide installed Port # 1 Port # 2 Port # 3 OR IMSIOS & MOUTS S PS OR IMSIOS & MOUTS S PS OT: When ordering back-to- back and three position cylinders, options must be specified for each cylinder. ll mounts are ordered separately. See pages 20 & 21. OUL TI & SPRI RTUR: - 4 ORS 11
5 LIRS OUL TI & SPRI RTUR: - 4 ORS LL STILSS STL LIRS SI TO SOLV ORRIO & VIROMT PROLMS MUTURI LL MTL PRTS ROM 300 SRIS STILSS STL TPS : SS, SS, SS, SS, SSP, SSP, SS, SS, SST SIL TPS : SS, SS, SSP, SSP, SST OUL LL ylinder parts are manufactured from type 300 series stainless steel. Otherwise, they are identical in construction to our standard Types,, & ylinders. Units are particularly recommended for use in the food and dairy industries and in highly corrosive atmospheres, such as found in the marine and chemical field. Maximum Stroke vailable: 130 ore Sizes vailable:,, 1-1/,, 2-1/, 3 & 4. or Stainless Steel Mounts consult factory. RQUST OP O TLO UMR SS200 OVRI OUR OMPLT LI O 300 SRIS STILSS STL LIRS. OR USIOS, OR SPRI RTUR, SPI: SPI: (ROT USIO) SR IITS SPRI I ROT (IR PUS) R (RR USIO) RO ORMLL RTRT (USIO OT S) SRR IITS SPRI I RR (IR PULL) RO ORMLL T I TMPRTUR SLS SPI TP 12 OT: Stainless Steel Mounting uts available upon request. or Special Options consult factory.
6 LIRS OPTIOS IL S SPRI RTUR - SIL TI vailable in all previous models except Types T & T. MIMUM STROK VILL IS 10. These ylinders can be supplied with the rods either normally retracted or extended by the spring. On SR models, ront ead Rod Seals are normally not provided, but can be if requested. SPI: SR IITS SPRI I ROT (IR PUS) RO ORMLL RTRT SRR IITS SPRI I RR (IR PULL) RO ORMLL T SRW IITS OPTIOL STROR SPRI (or heavy duty applications only.) SRRW IITS OPTIOL STROR SPRI (or heavy duty applications only.) ore Sizes Piston Rod T RST ULL STROK. Spring Stronger Spring. Spring Stronger Spring ST 9 24 ST / ST ST / ST ST ST USIOS SPI: (ROT USIO) R (RR USIO) (USIO OT S) IM. OR SIZS 1-1/ 2-1/ 3 4 1/2 7/16 1/2 1/2 13/16 1-3/ /16 2-5/8 3-1/16 OTS: 1) im. cushion screw shown fully closed. 2) ot available on Spring Return ylinders. 3) on-standard ushion djusting Screw locations available at slight additional cost. PPROIMT SPRI ORS I POUS otes: pplies to SR and SRW models only. LST 1/2 I O STROK IS TIVL USIO TO RU SOK & OIS. ULL RVRS LOW PROVI. LIR LT OT T. USIO USTI SRW LOTIOS SIL OUL OR SIZS USIO LIR TPS LOTIO 1-1/ 2-1/2 1-1/ 2-1/2 3 thru 4 ROT LL TPS (xcept those below) TPS, & OL RR LL TPS (xcept those below) TPS, & OL TP OL - OTS: 1) ixed ushions are ITRL. 2) Tandem ylinders - ushions installed on Rear ylinder Only. 3) Three Position ylinders - Rear ushion of ront ylinder not available. = USTL USIO VILL = I USIO OL VILL = O USIO VILL OUL TI & SPRI RTUR: - 4 ORS 13
7 LIRS OPTIOS OUL TI & SPRI RTUR: - 4 ORS OUL RO PKI SPI: RP Two sets of rod seals in Type cylinders - except and bore sizes. IL S SPI: S Spring installed in cylinder to retract rod should there be an air failure. imensions are those of a Single cting ylinder. I TMPRTUR SLS SPI: TP luorocarbon compound (Viton) seals, temperature range of +10 to OLLOW R SPI: M ole thru rod available up to 1 stroke. RO I. 3/8 1/ 5/8 3/4 1-1/4 OL SIZ 3/16 1/4 5/16 7/16 9/16 5/8 O T SPI: T ylinders available without Tang section (covered by dimension minus ). OVRSIZ RO SPI: Larger diameter rod for column loading. ot available on Type T-11/ bore. OR SIZ 1-1/ 2-1/ 3 4 RO I. / 1/ 5/8 3/4 1-1/4 LOW RITIO LIR SPI: L vailable in Type cylinders only. or extremely low friction at medium to high pressure. MTI PISTO SPI: RM To signal all ffect or Reed switches. vailable on Type & cylinders. RO WIPR SPI: WR Teflon wiper replaces the standard leather back-up ring in Types & cylinders only. POLURT UMPRS SPI: PU or use on high speed ylinder applications to reduce shock and noise PUR Where standard cushions can not be used. Made of 1/ thick PU Polyurethane and press fit between the head and piston PU UMPR ISTLL I ROT PUR UMPR ISTLL I RR PU UMPR ISTLL OT S vailable on all Type ylinders and ore sizes except Spring Return ylinders and ylinders having ccessory Pins, leeder Valves or ushions. dds 1/ of length for each bumper. 14 SSORIS: or valuable complementary accessories used with llenair ylinders see pages
8 LIRS OPTIOS LL T SWITS (S RTL/ Listed): LLIR all ffect switches are designed to be used with our type & thru 4 bore cylinders. The cylinders must be ordered with the RM option (adds O..L. to type). ll switches have an L indicator light, nine (9) foot leads, and an operating temperature range of - 22 to MOL UTIO SWITI VOLT ORMLL OP PP output ORMLL OP P output ORMLL OP TRI output ORMLL OP TRI output OTS: 1) PP output is Sourcing 2) P output is Sinking ll models require a mounting strap purchased as a separate item based on the cylinder bore size. LIR OR SIZ TIL T SWITI URRT SWITI POWR SWITI SP 6-24/ 1 mp max. 24 watts max. 1.5 ms operate 0.5 ms release 6-24/ 1 mp max. 24 watts max. 1.5 ms operate 0.5 ms release /60 600m max. 5 mp inrush /60 600m max. 5 mp inrush STRP O. & 1-1/ RMS1 & 2-1/ RMS2 3 RMS3 4 RMS4 15 watts max. 1.5 ms operate 0.5 ms release 72 watts max. 1.5 ms operate 0.5 ms release 22 W/PV cable VOLT ROP 0.5 Volts 0.5 Volts R SWITS (S RTL/ Listed) STR P LLIR Reed switches are designed to be used with our & type thru 4 bore cylinders. ylinders must be ordered with the RM option (adds O..L. to type). ll switches have nine (9) foot hook up cable. Operating temperature range is - 22 to Models R02, R04 and R05 have an L indicator light. Models R02, R03, R04 and R05 have MOV surge suppression. MOL UTIO SWITI VOLT R01 R02 R03 R04 R05 ORMLL OP SPST ORMLL OP SPST ORMLL OP TRI OUTPUT ORMLL OP TRI OUTPUT ORMLL OP SPST 0-240/ / / /60 TIL T SWITI URRT SWITI POWR SWITI SP 1 mp max. 30 watts max. 0.6 ms operate 0.05 ms release 1 mp max..005 mp min /60 4 mp max. 50 mp Inrush / / /60 4 mp max. 50 mp Inrush mp min. 0.5 mp max mp min. 30 watts max. 0.6 ms operate 0.05 ms release 100 watts max. 0.6 ms operate 0.05 ms release 100 watts max. 0.6 ms operate 0.05 ms operate 10 watts max. 0.5ms operate 0.1ms release Models R01 - R04 include mounting bracket P/ RM2. Order mounting strap based on cylinder bore size as shown below. LIR OR SIZ & 1-1/ & 2-1/ 3 4 STRP PRT O. RMS1 RMS2 RMS3 RMS4 1 Volt 1 Volt 1.05 VOLT ROP 0 Volts 3 Volts 1 Volt 1 Volt 3.5 Volts Model R05 supplied with a universal mounting bracket and strap covering all bore sizes (1-1/8 thru 4 ) P/ RM1 R M2 bracket OUL TI & SPRI RTUR: - 4 ORS STR OPTIOS OR LL TPS & OR SIZS PT WR OT. (VILL T TR T.) 15
9 LIRS OPTIOS OUL TI & SPRI RTUR: - 4 ORS 16 R SWITS STR P Models R01 - R04 22 W/PV cable 1.05 R M2 bracket Model R05 MOIITIOS : PLS OSULT TOR SPI Listed below are some of the many modifications llenair makes daily. R: on-standard Rod xtensions ( im.) Length Required on-standard Rod Threads ( im.) Size Required on-standard Rod Thread Length ( im.) Length Required emale Threads In R ed o Thre ead omplete ed on-standard Wrench lats Location & Size Special Rod Materi ed S: on-standard Port Location(s) Print Required on-standard ushion Screw Location(s) Print Required xtra Ports Print Required on-standard ole In Tang Size & Location Required OT: The Port Sizes shown in the dimension drawings are the largest available. LIST LOW R SPIL OS W US WVR SPIL LIR (S) IS ORR. OT LL OS R LIST - OL T MT OMMO O SRIPTIO O SRIPTIO O SRIPTIO Sp. imension o Rod Threads L 303 Stainless Steel Rod Sp. imension o Rod Threads oth nds L Low riction ylinder Sp. & imensions o Rod Threads ront nd M ollow Rod Sp. & or yl-heck R o Rod Threads Rear nd T otang S Sp. Per ustomers Specs. Sp. Per ustomers rawing Q Stainless Steel Snap Ring Sp. imension TP i-temp. Packings R leeder Valve oth nds RP ouble Rod Packing I Pin oth nds R leeder Valve ront nd P xtra port in ront I Pin ront nd RM Magnet On Piston PR xtra port in Rear IR Pin Rear nd RR leeder Valve Rear nd P xtra port oth nds Special Tail R Outboard Rod uide on-standard Port Location K emale Thread In Rod U Steel Tube S ail Safe W/Spring In ront KR Sp. & or K & KR Kits W Stronger Spring WR Rod Wiper MTRILS: Special seal compounds are available for a wide range of fluid media and environments. Tubes, eads, Pistons and Rods can be supplied plated, hardcoated or in other materials. Please consult the factory for special requirements, stating quantity required. SPIL SIS: Many times llenair is able to change the standard configuration of our ylinders to meet ustomer s special requirements. print from the ustomer is needed so we can evaluate and properly quote such specials. Internal on-rotating Rod ylinders can be made in, 3 and 4 bore sizes with maximum stroke of 20. PLS OSULT TOR O T OV SPILS STTI QUTITIS RQUIR W/PV cable R M universal bracket
10 TPS, & SIL M + S T R OK ( OU L T I) M + ( S T R OK 2 ) ( S IL T I) + S T R OK ( OU L T I) + ( S T R OK 2 ) ( S IL T I) /2.P.T. P IS T O U L L R TR T Z O I. O I. TPS, & OUL + S T R OK ( OU L T I) + ( S T R OK 2 ) ( S IL T I).P.T. + S T R OK P IS T O R T R T T O T R M L T O I. L. OR SIZS TP TP & O I. 2-1/16 3-1/16 3/8 5/8 2-1/16 3-1/16 3/8 1-3/8 5/8 1-1/ 2-5/8 3-5/8 1/ 1-3/4 2-5/8 3-5/8 1/ 2-1/4 2-1/ /16 2-3/ /16 3-1/4 4 *4- *4-13/16 4-3/8 L. OR SIZS 1/8 M TP (ront Only) 4-15/16 Z (ront only) 3/4 11/16 3/8 5/8 11/16 3/8 ** 1/4 1-1/4 1/ 1-7/16 1-1/4 5-3/16 5-3/16 6-3/16 6-3/16 3/16 1-1/16 1-1/16 5/16 1-1/4 1/ 1-7/16 1-1/4 5-3/16 5-3/16 6-3/16 6-3/16 3/16 1-1/16 1-3/8 5/16 1-3/8 5/8 1-11/16 1-1/ 6-3/16 6-3/16 7-3/16 7-3/16 1/4 1-3/8 1-1/ 7/16 1-3/8 5/8 1-11/16 1-1/ 6-3/16 6-3/16 7-3/16 7-3/16 1/4 1-3/8 1-1/ 7/16 2-1/4 1/ ** 3-15/16 4-1/8 4-15/16 5-1/8 1/8 3/4*** 2-3/16 1-7/16 3/4 2-1/ /4 (ront Only) 3/4-16 3/8-16 3/8 1/8 3/4-16*** -14 3/8-16 1/-13 3/8 1/ 1-1/ 1/ /-13 5/8-11 1/ 5/8 1/ /8-12 5/8-11 3/4-10 5/8 3/4 2-1/ 3/8 1-3/ /-12 3/ /4 3 3/8 1-3/ /-12 3/ /4 4 1/2 1-3/ / / / /4 10 3/16 1-3/4 STR WR LTS RO I. 1/8 O /16 TP & RO I. W 3/8 5/16 15/16 5/16 1/ 7/16 1-3/8 5/16 5/8 1/2 1-3/8 5/16 3/4 5/8 1-5/8 5/16 7/8 2-1/8 3/8 1-1/4 1-1/8 2-1/8 3/8 1/4 OUL TI & SPRI RTUR: - 4 ORS LIRS IMSIOS W *5-3/8 on Single nded ylinders having Tang section, except types, &. **On Oversize Models, =1-3/8 & =1-1/4 ***3/4-16 oth ends on Types & 3/4-16 Rear and -14 ront on Type. Omit dimension when laying out ylinder with Tang section omitted. dimension remains except on, and 4 bores. 17
11 LIRS IMSIOS OUL TI & SPRI RTUR: - 4 ORS TPS, & ITRL RR SWIVL M + S T R OK ( OU L T I) M + ( S T R OK 2 ) ( S IL T I) P V L O-I. M 13/16 7/16 11/16 ** ** K TP & L TP 1/4 3-11/16 TPS & 4-11/16 P V 13/16 7/16 1/4 3/8-16 9/16 3/8 3/8-16 1/ 15/16 3/8 3-15/16 4-1/8 4-15/16 5-1/8 1-1/ 1-5/8 15/16 2-7/16 1-7/16 1-1/4 1/ 6-1/4 6-1/4 2-1/4 1-9/16 2-7/16 1-7/16 1-1/ 1/ V1 Z ST 1-1/ 1-1/ 13/16 3/8 5/ /16 1/ 5/ / 1-13/ / /16 1-1/ 1/ 7-15/ / / /16 2-1/4 1-11/16 1/ 3/ /16 1-5/8 3-11/ /16 1-1/ 1/ 8-7/16 8-7/16 8-7/16 8-7/16 2-1/4 1-3/4 1-1/16 1/ 3/ /8 2-3/8 2-1/4 2-1/4 2-1/4 3/4 9-11/ / / / / 1-1/ 3/4-14 3/ /4-12 OR LL IMSIO OT LIST, S TULTIOS O P 17 TPS, & K-TO-K + S T R OK ( OU L T I) + ( S T R OK 2 ) ( S IL T I).P.T. + S T R OK ( OU L T I) + ( S T R OK 2) ( S IL T I).P.T. I. P IS T O U L L R T R T O-I. P IS T O U L L R T R T O-I. OR LL IMSIO OT LIST, S TULTIOS O P P IS T O U L L R T R T L. OR SIZS TP V1 Z -I. /2.P.T. K + S T R OK ( OU L T I) + ( S T R OK 2 ) ( S IL T I) L. OR SIZS 1/ 1/ 1-1/ 1/ 1/ 2-1/ 1/ 3 1/ 4
12 TPS S, S & S SIL V + S T R OK ( OU L T I) + ( S T R OK 2 ) ( S IL T I) W.P.T. T T P IS T O U L L R T R T R S L. OR SIZS 1-1/ R S T U V 1-1/3 3/4 11/3 7/3 1-1/ 3/4 11/3 7/3 1-1/ 1-17/3 1/ 9/3 1-1/4 1/ 11/3 2-1/ TPS S, S & S OUL U T.P.T. + S T R OK W 1-1/ 1-5/8 P IS T O U L L R T R T T O L T OR LL IMSIOS OT LIST, S TULTIOS O P 10. TP T TPS P, P & P M + ( S T R OK 2 ) M + IR S T S T R OK + T OT L S T R OK + IR S T S T R OK + T OT L S T R OK.P.T..P.T. /2 + S T R OK.P.T. + S T R OK.P.T. /2 O I. O I. Z O-I. O-I. TPS T TPS P, P & P P IS T O U L L R T R T P IS T O U L L R T R T P IS T O U L L R T R T P IS T O U L L R T R T +STROK + IRST STROK.P.T. + TOTL STROK +STROK + STROK.P.T. O I.P.T. + STROK.P.T. W O I O I M L. OR TP P TPS P & P SIZS ST ST 1-1/ 8-9/16 8-9/ /16 8-9/16 8-9/ /16 2-1/ 10-3/ / / / / / / /4 W 10-9/16 3/4 10-9/16 3/4 12-3/ /16 16 L. OR SIZS 1-1/ 2-1/ /16 2-1/ / /16 2-1/4 M ST 11-3/ / / / /4 OR IMSIOS OT LIST, S TULTIOS O P 17 OUL TI & SPRI RTUR: - 4 ORS LIRS IMSIOS 11-3/16 3/4 11-3/16 3/4 12-3/ / /8 19
13 LIRS MOUTS OUL TI & SPRI RTUR: - 4 ORS 20 L. OR SIZS ST * bore Type ylinders require Mount or Mounting ut on front and standard on rear. **II Single nded ylinders take standard Mounts or Mounting uts on rear end. MOUTI UTS Mounting uts supplied only with lange or oot Mounts and are included in the price of those Mounts. owever, they may be purchased as a separate item. OOT MOUT MOUTI RKTS & IMSIOS OOT L RO LVIS, RO UT OL UT & PI ST (ront Only) (ront Only) ST ST T OPTIO SUST W USI ROT OOT MOUT OL SWIVL RKT SPI TRUIO LOK MOUT MOUTI UTS ST (ront Only) T-7/8 M-7/ * * T-1 M / T-1.5 M-1-1/ T-2 M / T T T L MOUT ront or Rear PRT O / /16 3/ /4 25/ / 1/ / /4 5/ / /16 5/ / /4 3/ / MOUTI RKT IMSIOS O I S IM ST T Option suggested 2 Option suggested provides Tang flush with flange mounting surface. IM ST PRT UMRS -332 ST PRT UMRS ST ST ST ST 9/3 9/3 11/3 11/3 13/3 13/3 7/ /3 9/3 9/3 9/3 9/3 13/3 13/3 15/3 15/3 2-1/ 2-1/ 3-3/8 3-3/ /8 5/8 1-29/3 2-1/ 2-1/ 3-1/4 3-1/4 4-1/ 4-1/ 5-1/4 5-1/4 0 3/4 1-1/16 1-3/8 1-3/8 1-1/ 1-3/4 2-1/4-432 ST 11/16 11/16 1-3/8 1-3/ /4 1-1/4 1-3/4 1-3/4 1-3/8 1-3/8 1-9/3 1-9/3 1-29/3 1-29/3 2-17/3 2-17/3 3/16 3/16 1/4 1/4 5/16 5/16 1/ 1/ 9/3 9/3 9/3 9/3 13/3 13/3 15/3 15/3 1-11/ /16 1-5/8 1-5/8 2-1/4 2-1/4 3-1/4 3-1/4 2-1/ 2-1/ 2-1/ 2-1/ 3-1/ 3-1/ /4 1-1/16 1-3/8 1-3/8 1-1/ 1-3/4 2-1/4 S 1-9/3 1-9/3 1-3/4 1-3/4 2-3/8 2-3/8 3-3/16 3-3/16 O I
14 LIRS MOUTS TR SIZ () PRT UMRS IM ST ST ST ST ST 1-3/4 2-1/4 2-1/4 2-3/8 3-3/8 3-1/ 1-3/8 1-3/4 1-3/4 1-13/16 2-5/8 2-5/8 3/8-16 1/- 13 5/8-11 3/ /4-12 5/16 3/8 3/8 1/ 5/8 3/4 3/4 13/16 13/16 3/4 1-1/16 1/4 5/16 5/16 7/16 1/ 3/4 3/4 1-1/4 1-1/ 1-3/4 7/3 5/16 3/8 27/64 1/ 23/3 SWIVL RKT & PI LOK MOUT T OPTIO SUST PRT UMRS IM /4 2-1/ /4 2-1/ /4 5/16 5/16 1/ Z 9/3 9/3 13/3 15/3 3/8 1/ 5/8 3/4 S S 1-9/3 1-3/4 2-3/8 3-3/16 Z 1/4 5/16 7/16 1/ S S IM. PRT UMRS M-7/8 M-1-1/8 M-1-1/2 M-2 1-1/ 1-3/4 2-1/ /4 1-1/4 1-3/8 1-3/4 2-1/4 9/3 9/3 9/3 11/3 1-5/ / /4 21/ 3 3-3/4 S 3/4 1-3/8 TRUIO MOUT IM. PRT UMRS T OPTIO SUST 1/16 1/16 I /2 T-7/8 T-1 T-1.5 T-2 T-2.5 T-3 T-4 3-1/ 3-1/ / 5-3/ /4 2-1/ /4 5-1/ 1-3/8 1-3/4 2-1/4 2-3/4 3-1/4 4-3/8 3/8 3/8 1/ 1/ 3/4 3/4 3/4 3/4 3/4 1-1/4 1-1/4 1-1/ 1-1/ 1-1/ 1-3/ /8 2-11/16 2-5/8 3-1/ / 5-3/4 OUL TI & SPRI RTUR: - 4 ORS 21
CYLINDERS DOUBLE ACTING & SPRING RETURN: 7/8-4 BORES
LIRS OUL TI & SPRI RTUR: - 4 ORS LIRS 8 LLIR ORPORTIO, 255 ST SO STRT, MIOL,, 11501-3520, US, PO: 516-747-5450, : 516-747-5481 LIRS LL SLS R U- TMPR- TUR R O -40 to +250. LO LI STL SWIVL USI SRW MI I TSIL
More informationDIMENSIONS & MOUNTS. NOTE: For Spring Return and Fail safe options, double the stroke when calculating overall dimensions HEAD NUT (SSSM-114)
STAINLESS STEEL SMALL BORE CYLINDERS SSSM (All Stainless Steel). Available in 1-1/8 bore only. MODEL REAR PORTED - NO TANG Model SSSM (All Stainless Steel). Available in 1-1/8 (28mm) bore only. Pressure
More informationCYLINDER SERIES ISO (EX ISO 6431) Ø mm
YIR SRIS ISO 2 (X ISO 3) 5 mm ylinders made to ISO 2 VM available in various versions and with a wide range of accessories: onfiguration with or without magnet Single- or double-acting single- or through-rod
More informationHigh Performance Repairable Pneumatic Cylinder Parker Hannifin Corporation
High Performance Repairable Pneumatic Cylinder 219 Pneumatic ivision eatures Optional Piston Magnet Located under wear band, piston magnet is used for through-thebarrel sensors for electronic piston position
More informationIndustrial Cylinder Products Hydraulic and Pneumatic Cylinders. Catalog (01/11)
Industrial ylinder Products Hydraulic and Pneumatic ylinders atalog 00- (0/) Pneumatic ylinders Index Page Series, Heavy Duty, 0 P.S.I. ccessories - vailable Mountings and Specifications ushion Data -
More informationCYLINDER SERIES ISO (EX ISO 6431) Ø mm
YIR SRIS ISO 2 (X ISO 3) 5 mm ylinders made to ISO 2 VM available in various versions and with a wide range of accessories: onfiguration with or without magnet Single- or double-acting single- or through-rod
More informationEXCLUSIVELY AVAILABLE AT KAR IN CANADA
XLUSIVLY VILL T R I PS Series Universal - Plain ack ounting Semi-Steel ody, 3-aw Self-entering s wit 2-Piece ard Reversible aws edium duty 3 pinion design ac cuck is provided wit: 1 set of ard master jaws
More informationCOMPACT RAil. Major Benefits
OMPT Ril Thruster Pneumatic Slide T Major enefits uilt for high speed, high accuracy, and high load applications Precision movement ll adjustments made from rear of slide Travel adjustments stop load evenly,
More informationSeries VH Hydraulic Cylinders
Series H Series H very heavy-duty hydraulic cylinders are premium quality cylinders with operating capacities of,000 PSI. They fully meet NPA standards. And to make sure every cylinder is premium-quality,
More informationCYLINDERS. cylinders AIR MITE PNEUMATIC CYLINDERS TIE ROD CYLINDERS
YNRS 8 R MT PNUMT YNRS ine, and Micro ylinders. Our versatile cylinder product line can be used to meet their requirements. ll ir-mite s proudly carry the Made in US label. ylinders have a durable, maintenance-free
More informationSeries HB Solid Brass Cylinders
Series HB Solid Brass Cylinders or General Industrial Use in most nvironments 00 PSI Pneumatic 500 PSI Hydraulic Non shock,, /8, /, Bores Magnetic piston available to operate Aurora stainless proximity
More informationSeries HB Solid Brass Cylinders
Series HB Solid Brass Cylinders or General Industrial Use in most nvironments 00 PSI Pneumatic 500 PSI Hydraulic Non shock,, /8, /, Bores Magnetic piston available to operate Aurora stainless proximity
More informationISO Standard Hydraulic Cylinder
ISO Standard ydraulic ylinder Series S/SG Series S Q N Nominal pressure: S Pa ore size :,,,, Related quipment Series SG Nominal pressure: - Pa ore size : 3,,,,, 51 ISO Standard ydraulic ylinder Series
More informationKenstan. Volume 5. Knob Line of Locks. Introduction. Cam Locks. Drawer/Door Locks. Snap Bolt Lock. Plunger Lock PL40.
Volume 5 a t a l o g L O K O M P N Y of Locks 2 S V Introduction 1 am Locks 2 3 rawer/oor Locks 4 Snap olt Lock 5 PL40 6 PL45 7 PL50 8 L O K O M P N Y List and ata Sheet Introduction 1 of Locks Standard
More informationSeries HB Solid Brass Cylinders
Series HB Solid Brass Cylinders For General Industrial Use in most nvironments 00 PSI Pneumatic 500 PSI Hydraulic Non shock,, /8,, Bores Magnetic piston available to operate Aurora stainless proximity
More informationRW Series eatures and Benefits
RW Series...............................................................................3-6 eatures and Benefits..............................................................................3 ow To Order....................................................................................4
More informationFULL COLOR TAB #6 TC 105
FULL COLOR TAB #6 TC 105 SERIES TC 2-STAGE TELESCOPING CYLINDER CONSTRUCTION FEATURES 3 Bore Sizes: 0.75, 1.50 and 2.50 Strokes up to 60 2-Stage Telescoping Space Saving Design 100% Double Action Heavy-Duty
More informationOptions selector for T, VT, and ET V T S R 3 / 8 R C E N 1-1/8 5. 5/16" or 3/8"
Series T, T & VT Tiny Tim TUTORS /" and -/8" bore Single and double rod end styles Viton seals optional for higher temperatures Technical data Medium: ompressed air, filtered, lubricated or non-lubricated
More informationSection VIII Hydraulic Tooling
Section VIII Hydraulic Tooling MSTRLIN CYLINR CCSSORY MTING CHRT Masterline Knuckle Masterline Clevis racket Masterline RS Masterline lignment Coupler KN-1 C-1 1/2 x 1 7/8-RS SC-5 KN-2 C-2 1/2 x 2 5/8-RS
More informationParker Series 2A Air Cylinder
Parker ir ylinder hen the job calls for reliable, heavy-duty performance, specify. 00,000 psi yield strength chrome-plated, case-hardened piston rod.,000 psi yield strength rod-end stud with rolled threads.
More informationBimba ISO 6432 Air Cylinders
6 1 3 5 2 4 7 meets YOU NDS... eliable Service, World-Wide - rom a world-wide leader producing millions of actuators each year nvironmental - re-lubricated for longer, maintenance free operation Noise
More informationL & S Series Linear Slides
& S Series inear Slides asic Selection S Series (short) single bearing block design, short overall length. (Photo this page) Series (long) double bearing block design, increased bearing support. (Photo
More informationDOUBLE ENVELOPING WORM GEAR SETS
OUL NVLOPIN WORM R STS 172 one rive Product atalog and ngineering Manual ouble nveloping Worm ears & Speed Reducers ontents one rive ear Sets...173 one rive ear Sets - Tables of acklash... 174 one rive
More informationSINGLE ROD Pneumatic. Major Benefits
SINGL ROD Pneumatic SPMNT Major enefits Ideal for shot pin applications Shock pad options reduce noise and minimize end of stroke shock Imperial or metric versions available Simple construction for easy
More informationTELESCOPIC DOUBLE ACTING
GRAL SPCIICATIOS Our telescopic double acting metric range of hydraulic rams are designed for heavy duty industrial service. By utilising welded construction and our many years of experience, combined
More informationENGINEERING DATA: SERIES STP SLIDES WITH RAIL BEARING
SRIS STP SLIS IFORMTIO SHT IMPORTT IFORMTIO O OT ISR! Use this formation sheet to assist with slide stallation and setup. File with matenance or mache documentation. PRT O.: 1-9 Orderg ata TO ORR SPIFY:
More informationSECTION C-C SCALE 1 / 2 SECTION E-E SECTION AT-AT SCALE 1 / 2 SCALE 1 / 2 SECTION F-F SCALE 1 / 2 SECTION M-M SCALE 1 / 2 DETAIL D SCALE 2 : 1
RVIS PRT SRIPTION IN OM, TO MK - //0 Y.LI IT LRR 6 dded fillet at bottom of PM pocket in item. //0 TIO 4. R. dded a new part # //0 Y.LI T 4 (.7) Revised welding note at etail View /6/0 Y.LI WTR TIGHT Ø6.7
More informationTable of Contents. Numatics 2009 Rev. 1/09
Table of ontents RW Series...-8 eatures and Benefits... How To Order... Replacement omponents... imensions... 5 Technical Specifications... 6 Switch Information....7-8 Numatics 2009 Rev. /09 2 RW-Series
More informationMedium Duty Hydraulic Cylinders Series 3L
Medium Duty Hydraulic ylinders Series L Medium Duty Service Industrial Tie od onstruction Nominal Pressure 000 PSI Depending on ore Size Standard ore Sizes " through " Piston od Diameters /" through -/"
More informationRPD Series Delrin End Cap Roundline Plus Stainless Steel Body Actuators 9/16" to 2" bore Double acting pneumatic actuators
RP Series elrin nd ap Roundline Plus Stainless Steel Body ctuators 9/6" to 2" bore ouble acting pneumatic actuators elrin cetal Resin end cap cylinders for washdown, and corrosive environment application
More informationNeedle Valves. Needle Valves - High Pressure. 30SC, 43SC, 30VM, 40VM, 60VM, 100VM & 150V Series. High Pressure. Pressures to 150,000 psi (10342 bar)
eedle Valves igh Pressure 30S, 43S, 30V, 40V, 60V, 00V & 50V Series Pressures to 50,000 psi (0342 bar) Since 945, utoclave ngineers has designed and built premium quality valves, fittings and tubing. This
More informationTighteners and Idlers
Tighteners and Idlers...rive Tighteners, Idlers, Idler ushings, Set ollars, Keystock and ast Iron ars wide variety of specialized products for automatic production. rowning is adding new power transmission
More informationSeries M Solid state to -56/Z76-59/Y59-5P/Y7P -J59/Y59-59/Y7N Surge absorber (+) Reverse flow prevent diode ( ) (+) ( ) (+) ( ) (+) (+) ( )
asic iring Solid state 3 wire NPN (hen power source for and load is not common.) Sink input specifications 3-wire NPN Switch 3-wire N connection for NPN output (using relays) Series M uto Switch onnections
More informationHOIST-RING SAFETY PRECAUTIONS
age 34 (Rev. 4-07) & SI ROUTS 7200 MIR RIV, WRR, MI 48092, 586-9 & SI ROUTS 7200 MIR RIV, WRR, MI 48092, 586-978-3377 OIST-RI STY RUTIOS The following safety precautions apply to all lifting devices on
More informationNeedle Valves. Needle Valves - High Pressure. High Pressure 30SC, 30VM, 40VM, 60VM, 100VM, & 150V Series. Pressures to 150,000 psi (10342 bar)
eedle Valves igh Pressure 30S, 30V, 40V, 60V, 00V, & 50V Series Pressures to 50,000 psi (0342 bar) Since 945, utoclave ngineers has designed and built premium quality valves, fittings and tubing. This
More informationNeedle Valves. 10V & SW Series. Needle Valves - 10V & SW Series. Low Pressure Valve Features: Low Pressure
eedle Valves Low Pressure 10V & SW Series Pressures to 15,000 psi (103 bar) Since 195 utoclave ngineers has designed and built premium quality valves, fittings and tubing. This commitment to engineering
More informationAPCO CVS-6000/6000A SWING CHECK VALVES
ULLTIN 00/579 JUN 2016 PO S-00/00 SING K LS PO S Swing heck s are recommended for clean and dirty services such as ater, Sewage or Industrial applications. S-00/00 Swing heck s are a heavily constructed,
More informationThe Complete Range of Fluid Power Products
The omplete Range of Fluid Power Products lectropneumatics & ydraulics (India) Pvt. Ltd. Fluid Power ivision (FP) lectropneumatics Fluid Power ivision (FP) lectropneumatics and ydraulics (I) Pvt. Ltd.
More information1 Cylinder. 1 - Cylinder Type 3 - Cylinder Capacity 4 - Cylinder Stroke. 2 - Cylinder Options. Cylinder Accessories
1 Type 30 06 T 2 3 4 5 apacity Stroke Options ode 1 - Type 3 - apacity 4 - Stroke ydraulic 2 - Options L LN LN P P T U U U ULN S/ - ollow ole / - eneral Purpose / - ollow ole / - igh Tonnage S/ - lat ody
More informationValvair Manual Spool Valves
Valvair anual Spool Valves ir ilot, anual & echanically ctuated Section www.parker.com/pneu irectair rass oppet irectair Viking 0 V / Z eatures & Specifications... 5 art umbers...5-5 Technical ata... 55
More information- hydraulic tools & equipment -
- hydraulic tools & equipment - PUMPS YLINRS PULLRS JKS TOOLS SSORIS 1-18 let your boss do the hard work oss ydraulics was born from over 150 years of collective experience in the ustralian market. t oss
More informationSeries LAA Industrial Interchangeable Pneumatic Cylinders. Catalog LAA-1 05/00
Series L Industrial Interchangeable Pneumatic ylinders atalog L- 0/00 Model Numbers Lin-ct Series L Series L Model Numbers How to Develop Them How to Decode Them Lin-ct Series L cylinders can be completely
More informationSpecification. Tube I.D Port size Rc1/8 Rc1/4. Medium. Ambient temperature. Lubricator
series MIITURE YLIDER eatures on lubrication Special housing and bushing enables self lubrication of piston rod. igh quality long service life ard anodised stainless steel cylinder tubes offer a high resistance
More informationHydraulic Systems Hydraulic Clamping
ydraulic Systems 19. 1 ydraulic lamping Page ydraulic lamping Page 1-21-4 1-21-51 1-21-72 1-211-2 1-211-4 1-211-52 1-211-54 1-212-4 19.2-19.3 3-1-S-475 3-1--475 19.6 52-Series 19.3 3-1-S-11 19.7 3-1--11
More informationSeries MK ø12, ø16, ø20, ø25, ø32, ø40, ø50, ø63
otary lamp ylinder/standard Series MK ø, ø, ø, ø, ø, ø, ø5, ø ow to Order MK 1 3 S otary clamp cylinder Mounting Symbol Style ore size Through hole & both ends tapped (Standard) ø, ø oth ends tapped Through
More informationSeries NCM. Air Cylinder. Stainless Steel Body Cylinders 7/16", 9/16", 3/4", 7/8", 1-1/16", 1-1/4", 1-1/2", 2" Bore
CT.ID2-2 ir Cylinder Series CM Stainless Steel ody Cylinders 7/16", 9/16", 3/4", 7/8", 1-1/16", 1-1/4", 1-1/2", 2" ore ow available in 7/16" and 9/16" bore Double Rod/Double End Mounting on-rotating Rod
More informationSquare 1 Air Cylinders
Square 1 ir Cylinders General Standard Ratings and Sizing Guide.... Page Construction Details....,. How a Square 1 is built Standard Specifications....5 odel Number Codes....6 Option ist....6 How to Order....6
More informationZ % OUTSIDE AIR (US & CANADA) Z RECIRCULATION (US) Z PROCESS HEATER (US AND CANADA)
Z83.4 100% OUTI IR (U & ) Z83.18 - RIRULTIO (U) Z83.25 - RO TR (U ) TT112 & TT115 orizontal Model L L R Y J IR MR URR / LOWR TIO ILTR TIO ILT MR ILT OO WIT IRR M X W I V Z Z T K V Q R R 2 IMIO MOL J K
More informationIndex MANUAL SPRING MOTOR EXTRAS. +44 (0) or visit Fuel Hose Reels. Fuel Hose Reels. Fuel Hose Reels.
Index SPRIN L ompact Hose Reels Hose I.. 6 mm - 10 mm Pressure 21 R P Performance Hose Reels Hose I.. 6 mm - 12 mm SH, MP & HP Heavy uty Hose Reels Hose I.. 6 mm - 19 mm Pressure 350 R Pressure 350 R T
More informationDOCUMENT STATUS: CORE HEALTH & FITNESS, LLC IP-S1313-XXXXS REVISION HISTORY NOTES: 1864 G MATERIAL SEE BOM
RVSON STORY RV T SRPTON O Y 0-4-0 RLS OR PROUTON 5 MM. SSMLY N NSPTON PR SOP 0-.. NSTLL Kg. STKR N X Lb. STKR TO NS O SROU WT TP. -04-0 NS TRU PLOT PROUTON -- S O O OR TLS 30 MM 03-3-0 3-044 N 3-, TS S
More informationISO 6431/6432 Cylinders
ISO 6431/6432 ylinders ISO 6431, VDM 24562 ir ylinders 11.2-11.6 ISO 6431 11.7-11.9 ISO 6432/TOP ylinders 11.10-11.22 ISO 6432 11.23 P ir ylinders 11.24-11.26 P 11.27 ISO 6431/6432 imba ISO 6431, VDM 24562
More information10%lighter. 1.7 kg. 1.9 kg. Air Cylinder. New. Weight. Reduced weight by changing the shape of the rod cover and head cover. Series MB1 CAT.
ir ylinder ø32, ø40, ø50, ø63, ø80, ø100, ø125 New RoS Weight (ø50-100 stroke) 10%lighter Existing model 1.9 kg New Series M1 1.7 kg Reduced weight by changing the shape of the rod cover and head cover.
More informationRound Type Hydraulic Cylinder
Round Type ydraulic Cylinder Series CM CQ Series CM CK C CM CS C2 C ominal pressure: 3. MPa ore size :,,, 233 3. MPa Round Type ydraulic Cylinder Series C M ø, ø, ø, ø With uto Switch ow to Order CM L
More informationThe Complete Range of Fluid Power Products
The omplete Range of Fluid Power Products lectropneumatics & Hydraulics (India) Pvt. Ltd. Fluid Power ivision (FP) lectropneumatics Fluid Power ivision (FP) lectropneumatics and Hydraulics (I) Pvt. Ltd.
More informationDimensional Data Clevis / Brackets / Pins / rod Eyes
Dimensional Data levis / Brackets / Pins / rod yes W B W +.00 +.00 rod LVIS R KK THRD Load (tension) (lbs) Size Part # ode KK B R W R Part # ode 15-7-1001 101,80 7/16-0 / 11/ / 1/ 11/ 1/ 1/ 5/8 15-7-1001
More information15% lighter. Air Cylinder. New. New. 1.31kg. Series CA2 CAT.ES20-222B. Reduced weight by changing the shape of the rod cover and head cover.
ir ylinder ø40, ø50, ø63, ø80, ø100 Reduced weight by changing the shape of the rod cover and head cover. Weight reduced by up to ew RoS (ø63-50 stroke) 15% lighter 1.31kg ew 1.54 kg Existing model Easy
More informationISO Standard Hydraulic Cylinder
IO tandard ydraulic ylinder eries / eries eries Nominal pressure: a ore size :,,,, Q N Related quipment - Nominal pressure: a ore size : 3,,,,, 4 IO tandard ydraulic ylinder eries Nominal pressure a/ a
More informationNEN Series NFPA Aluminum Cylinders
NEN Series NP luminum ylinders 1-1/2" to 4" bore sizes ompetitively priced Magnetic piston standard djustable cushion standard Sleeve nut construction standard Stocked strokes Technical data Medium: iltered
More informationTIG Welding (Outside) Cooldown LN2 Input Bayonet DIA. CYLINDER O.D. SECTION A-A SECTION B-B
ryogenic Triple Feedthru NOT: FLNGS (PRTS 5 N 5) MUST LIGN S SHOWN WITH.250 I. OWL HOLS N LIFT HOLS T TH TOP. TIG Welding (Outside) TIG Welding (Inside) Stack Port TIG Welding (Outside) TIG Welding (Outside)
More informationRC-Series DUO Cylinders, Single-Acting. The Industry Standard General Purpose Cylinder.
R-Series UO ylinders, Single-cting Shown from left to right: R-506, R-50, R-2510, R-4, R-10010, R-55, R-1010 The Industry Standard General Purpose ylinder s ll R cylinders are equipped with hardened removable
More informationALLENAIR CORP. CALL FOR APPLICATION ASSISTANCE
ALLENAIR CORP. AIR OPERATED STAINLESS STEEL PISTON PUMPS CAN TRANSFER CIP CLEAN IN PLACE SOLUTIONS FROM IBC, CARBOYS, 5 AND 55 GALLON DRUMS OR ANY CONTAINERS Allenair Manufactures Dispensing & Transfer
More informationSeries CNS. Cylinder with Lock Double Acting, Single Rod - X X1166. ø125, ø140, ø160. How to Order. Without auto switch With auto switch
ylinder with Lock ouble Acting, Single Rod Series S ø1, ø, ø ow to Order Without auto switch With auto switch S S L L 1 1 1 1 - X16 - X16 uilt-in magnet L 1 ounting style asic style oot style Rod side
More informationINFORMATION SECTION. 2.3K - 3.5K Dexter Torflex Axles Assembly #10. Spring Axle Measurement. 4K - 6K Dexter Torflex Axles Assembly #11
STION INORMTION Spring xle Measurement 2K exter Sprung xles ssembly 3.5K exter Sprung xles ssembly 5.2K - 6K exter Sprung xles ssembly 7K exter Sprung xles ssembly 7.2K exter Sprung xles ssembly 8K exter
More informationPetroleum Hose Reels
Petroleum ose Reels ome uel elivery In-plant Refueling Marine Refueling Off-road Vehicle/quipment Refueling ou an t uy etter Reel. amily owned and operated since 1933 MNUL OR POWR RWIN RLS Series 6000
More informationKeymatic Line of Locks
Volume 5 a t a l o g enstan L O O M P N Y eymatic Line of Locks 2 S V X Introduction 1 am Locks 2 3 rawer/oor Locks 4 Gang Locks 5 Snap olt Lock 6 s 7 8 9 10 11 Z olt Locks 12 Ratchet Locks 13 eys 14 enstan
More information% lighter. Air Cylinder. New. New RoHS. 1.31kg. Series CA2. Reduced weight by changing the shape of the rod cover and head cover.
ir ylinder Ø 40, Ø 50, Ø 63, Ø 80, Ø 100 Reduced weight by changing the shape of the rod cover and head cover. Weight reduced by up to New RoS 15 (Ø 50-50 stroke) % lighter 1.31kg New 1.54 kg Existing
More information* Screw clearance to allow bolt head to pass through - no counter bores
Technical Data: Medium: Filtered, lubricated or nonlubricated, compressed air Operating Pressure 00 psig (.6 Bar) Max. Temperature Range: Standard Nitrile seals: -0 F to 00 F (-0 to 65 ) 50 F max. with
More information4-Way, 5-Port, 2 & 3-Position Solenoid and Remote Pilot 1/2" & 3/4" Ports. Technical & Service Data. Pneumatic
atalog VL-UTO-/US (Revised 6/0/0) pplication & Model Selection S utomotive Subbase Valves -Way, -ort, & -osition Solenoid and Remote ilot /" & /" orts pplication ual pressure or diverter valve operation
More informationRODLESS GANTRY RAIL PNEUMATIC SLIDE
ROLSS GNTRY RIL PNUMTI SLI Major enefits Space-saving design Smooth, precise movement High load capacity with very low deflection Improved moment capacity Two bore sizes offered ( and mm) Long travel lengths
More informationCylinder with Lock. MNB Series. A locking cylinder ideal for intermediate stops, emergency stops and drop prevention. ø32, ø40, ø50, ø63, ø80, ø100
ylinder with Lock M Series ø, ø, ø, ø, ø, ø locking cylinder ideal for intermediate stops, emergency stops and drop prevention. Simple construction force magnifying mechanism is employed based on the wedge
More informationSMD2. Compact cylinder. Space saving structure 6, 10, 16 20, 25, 32. Simple square design. Switch integrated. Easy centering. Precise installation
pace saving structure Overview his direct mount cylinder is a high rigidity/small square air cylinder with excellent installation accuracy and multisurface direct mount. he square shaped body improves
More informationISO Standard Hydraulic Cylinder
IO tandard ydraulic ylinder eries / eries eries Nominal pressure: a ore size :,,,, Q N Related quipment - Nominal pressure: a ore size : 3,,,,, ourtesy of teven ngineering, Inc.- Ryan Way, outh an rancisco,
More informationHYDRO-PNEUMATICS. 1) Hydro-Pneumatic Tool De-Clamp Cylinders PCS Series ) Hydro-Pneumatic Intensifiers for Machining Centers... 1.
HYDRO-PNEUMATICS 1) Hydro-Pneumatic Tool De-Clamp Cylinders PCS Series... 1.310 2) Hydro-Pneumatic Intensifiers for Machining Centers... 1.330 HYDRAULIC CYLINDERS 1) LH7 Series... 2.110/1 Std. Mounting
More informationRod end male thread. With rubber bumper 056(9/16") 075(3/4") 106(1 1/16") 150(1 1/2") 250(2 1/2") 300(3")
T.ID0-1 New ompact ylinder Series NQ8 ore size: 06(9/16 ),(/ ),106(1 1/16 ),(1 1/ ) 00( ),0( 1/ ),00( ),00( ) Now available in 00 ( ) and 00 ( ) bore sizes Standard type ctuation Style uilt-in magnet Rod
More informationACTUATORS. F-Series Plus Cylinders Single and Double acting 9/16" to 3" bore. Technical features Medium: Filtered, lubricated or nonlubricated,
F-Series Plus ylinders Technical features Medium: Filtered, lubricated or nonlubricated, compressed air Operating pressure 200 psig (3.6 Bar) Max. Temperature range: Standard Nitrile seals: -40 F to 200
More informationStainless Steel Reels
Stainless Steel Reels Washdown hemical Transfer Potable Water Pharmaceuticals & osmetics Steam leaning ood Processing Marine ueling ire Protection airy Operations ottling Plants ou an t uy etter Reel.
More informationCompact cylinders. Fixing dimensions are compliant to norm ISO 6431 or UNITOP. Suitable for standard fixing elements
ompact cylinders Fixing dimensions are compliant to norm 431 or Suitable for standard fixing elements igh reliability and long lifetime Standard magnetic version Special strokes on request aterials arrel:
More informationTo order this part, call Lifco Hydraulics USA Toll Free at R5/A5 Series Cylinders NFPA Interchangeable HYDRO-LINE, INC.
ROOR, IL To order this part, call Lifco Hydraulics U Toll ree at -00-9-79 R/ eries ylinders NP Interchangeable HRO-LIN, IN. Table Of ontents To order this part, call Lifco Hydraulics U Toll ree at -00-9-79
More informationFP 106 x PTM - PS
Single and Double acting 9/6" to " bore Technical Data: Medium: Filtered, lubricated or nonlubricated, compressed air Operating Pressure 00 psig (.6 Bar) Max. Temperature Range: Standard Nitrile seals:
More informationHEAVY DUTY PNEUMATIC AND HYDRAULIC ROTARY ACTUATOR
000- Y UTY PNUMT N YU TY TUT Major enefits eavy duty ide variety of options and accessories ersatile design igh torque UTPUT TUS T,800 in-lb [595 Nm] 000- high strength alloy steel racks and pinions ensure
More informationhydraulic power clamps
ourtesy of M/Flodyne/ydradyne Motion ontrol ydraulic Pneumatic lectrical Mechanical (8) 426-548 www.cmafh.com hydraulic power clamps Table of ontents ydraulic lamping 1-21-4 1-21-51 1-21-72 1-211-2 1-211-4
More informationVictory A-Series Actuators PRODUCT CATALOG V55A V43A FG1 V32A FG2 V26A
Victory -Series ctuators PROUT TLOG V55 with parallel motor mounting V4 G1 with parallel motor mounting V2 G2 with inline motor mounting V26 with inline motor mounting Longer, aster, and More Reliable
More informationDOCUMENT STATUS: CORE HEALTH & FITNESS, LLC IP-L2004-XXXXX G MATERIAL SEE BOM
NOTS:.. 9 SSML N NSPT PR SOP 0-9. OLOR TT Y T SLS ORR. a. OLOR: -XX OLOR SNTOR S SP N SOP 0-. b. T -XX N RSULT N ON OLOR OR T MTL SROU N RNT OLOR OR T MTL RM LSO WT -XX LST ON T OM. c. T -00XX S T OLOR
More informationHand Crank & Brake Assembly. 12V 1 /3 hp Motor. See Page 128 for Reel Dimensions & Sizes. (lengths over 100' are spliced)
ooster The kron rass ooster Reel is designed to be light weight and extremely durable. There are more options than ever as these reels are available in multiple sizes, and in both electric and manual rewind.
More informationReduced by Max. 58% Maximum allowable stroke when using clevis bracket CS2 CS Stroke (mm)
ir ylinder 7. kg eight Reduced by Max. 58% ew arge ore Sizes ø15, ø, ø ighter installation achieved by reducing weight. Die cast rod cover and head cover used to achieve greater weight reduction. Rod bore
More informationTable of Contents ISO
Table of Contents ISO 6432...3-12 Features and Benefits...3 How to Order....4 Dimensions Single Rod End, Single and Double Acting...5 Single and Double Acting-Double Rod...6 Mounting Accessories...7-10
More informationFULL COLOR TAB #1 TA 7
FULL COLOR TAB #1 TA 7 TA - How to Order Floating Rod Bushing SELF ALIGNMENT FEATURE Rod Bushing is designed to float.00 to improve bearing surface alignment. SERIES TA (NFPA) CYLINDER Reduces cylinder
More informationhydraulic power clamps
hydraulic power clamps Table of ontents lick Page # View ydraulic lamping Page M-Y-# ydraulic lamping Page M-Y-# 1-21-4 1-21-51 1-21-72 1-211-2 1-211-4 1-211-52 1-211-54 1-212-4 3-4 3-1-S-475 3-1--475
More informationSMS Solid Stainless Cylinders
SMS Solid Stainless Cylinders Space Saving and Conventional Lengths Pneumatic to 200 PSI Hydraulic 400 to 500 PSI Non shock /8, /2, 2, 3 Bore 300 Series Stainless Exterior Assures Aesthetics and Function
More informationASP Series Steel Body NFPA Cylinder Line
Series Steel Body NFPA Cylinder Line www.numatics.com Table of Contents Series Features and Benefits 3 Standard Mounts 4 How to Order 5 Port Size Availability 6 Dimensions 7-34 Rod Ends 7 Large Bore 8
More informationN Series. High Speed Inline Poppet Valves 2 & 3-Way. Section D
Series igh Speed Inline Poppet Valves & 3-Way Section www.parker.com/pneu/n X Viking Z asic Valve unctions...0 Series asic eatures... ommon Part umbers...-3 Model umber Index...4- Technical Information
More informationPNEUMATIC RACK AND PINION ACTUATORS. Advanced torque to size ratio
PNUMTI RK N PINION TUTORS dvanced torque to size ratio eatures: Pneumatic Rack and Pinion ctuators 90 ctuation for -way valves (Straight & ngle) 180 ctuation for -way (T-type) valves ctuators comply with
More informationAS/ASH SERIES ALUMINUM PNEUMATIC AND HYDRAULIC CYLINDERS... 6
AS/ASH SERIES ALUMINUM PNEUMATIC AND HYDRAULIC CYLINDERS............. 6 Section 6 8 ORDERING INFORMATION For Rod End Dimensions see back cover foldout... Basic Cylinder No Mount.0" to 4.00" For pressure
More informationHYDRAULIC HEAVY DUTY
Catalog #HHD-16 12/16 HYDRAULIC HEAVY DUTY Series HHD 3000 PSI RATED 10-25-16 WARNING IMPROPER SELECTION, IMPROPER USE OR FAILURE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN CAN CAUSE PROPERTY DAMAGE,
More informationVERTICAL THRUSTER PNEUMATIC SLIDE
ERTIAL TRUSTER PNEUMATI SLIDE Major Benefits Oversize guide rods Simple design Ideal for non-rotating applications Easy tooling mounting to tool plate bore sizes Units are powered by PD s rugged Series
More informationHARDWARE WIRE BALUSTRADING FITTINGS MARINE AND ARCHITECTURAL.
MRIN N RHITTURL HRWR WIR LUSTRING FITTINGS OPYRIGHT Y JMS GLN PTY LT *OL: Normal stocked items, ITLI: Please contact our sales team for availabilty and price 1 WIR LUSTRING FITTINGS STINLSS MRIN & RHITTUR
More information210C-1 21 MPa double-acting type hydraulic cylinder
17 2-1 21 MPa double-acting type hydraulic cylinder ompact design hydraulic cylinder at 21MPa. 21 MPa double-acting hydraulic cylinder with bores from 4 mm to 2 mm. Inovation of design scrutinized carefully
More informationEZ Series Linear Slides
EZ Series Linear Slides Optional owel ole/slot ode Optional slip fi t dowel holes and slip fit dowel slots allow for repeatably precise slide mounting and/or attachment of end tooling. Option may be specifi
More informationProvenair Series AN Cylinders Parts List / Service Instructions
Provenair Series AN Cylinders Parts List / Service Instructions 1-1/2, 2, 2-1/2, 3-1/4 and 4 BORES EXTRUDED BARREL CONSTRUCTION 5, 6, 8 and 10 BORES TIE ROD CONSTRUCTION TYPE: Aluminum, repairable, square
More informationUT Series. Pneumatic Actuators. UT-**-DA Series UT-**-SR Series
UT-**-D Series UT-**-SR Series full range of double acting and spring return actuators designed to NMUR for air supply ports and top mounting with ISO 5211 for base mounting patterns. Features Dual adjustable
More information