D20A, P, S, Q-6, D21A, P, S & Q-6 Volume 1 of 2
|
|
- Ethan Alfred Wilkins
- 5 years ago
- Views:
Transcription
1 Komatsu Service Manual D20A, P, S, Q-6, D21A, P, S & Q-6 Volume 1 of 2 Service Manual THIS IS A MANUAL PRODUCED BY JENSALES INC. WITHOUT THE AUTHORIZATION OF KOMATSU OR IT S SUCCESSORS. KOMATSU AND IT S SUCCESSORS ARE NOT RESPONSIBLE FOR THE QUALITY OR ACCURACY OF THIS MANUAL. TRADE MARKS AND TRADE NAMES CONTAINED AND USED HEREIN ARE THOSE OF OTHERS, AND ARE USED HERE IN A DESCRIPTIVE SENSE TO REFER TO THE PRODUCTS OF OTHERS. KOM-S-D20AP+
2 CONTENTS 10 ENGINE 12 TESTING AND ADJUSTING DISASSEMBLY AND ASSEMBLY.... No. of page POWER TRAIN 21 STRUCTURE AND FUNCTION TESTING AND ADJUSTING DISASSEMBLY AND ASSEMBLY MAINTENANCE STANDARD UNDERCARRIAGE 31 STRUCTURE AND FUNCTION DISASSEMBLY AND ASSEMBLY MAINTENANCE STANDARD HYDRAULIC SYSTEM 61 STRUCTURE AND FUNCTION TESTING AND ADJUSTING DISASSEMBLY AND ASSEMBLY MAINTENANCE STANDARD WORK EQUIPMENT 71 STRUCTURE AND FUNCTION : DISASSEMBLY AND ASSEMBLY MAINTENANCE STANDARD ELECTRICAL SYSTEM 81 STRUCTURE AND FUNCTION ,21-6
3 ENGINE.2 TESTING AND AD~USTING Testing and adjusting data Tool list for testing and adjusting Adjusting valve clearance Measuring exhaust gas color Measuring compression pressure Measuring blow-by pressure Adjusting fuel injection timing Testing and adjusting fan belt tension A A A A When carrying out testing, adjusting or troubleshooting, stop the machine on level ground, apply the lock levers and block the tracks. When working in groups, use agreed signals and do not allow unauthorized persons near the machine. When checking the water level in the radiator, wait for the water to cool. Do not remove the radiator cap while the water is hot. Boiling water may spurt out. Be careful not to get caught in rotating parts. 020, CD
4 ENGINE 13 DISASSEMBLY AND ASSEMBLY 8T ARTING MOTOR Removal and Installation ALTERNATOR Removal and Installation... " 13-2 WATER PUMP Removal and Installation FUEL INJECTION PUMP Removal and Installation NOZZLE HOLDER Removal and Installation CYLINDER HEAD Removal and Installation RADIATOR GUARD Removal and Installation RADIATOR Removal and Installation THERMOSTAT Removal and Installation ENGINE Removal Installation ;2
5 POWER TRAIN %1 STRUCTURE AND FUNCTION General (020-6) General(021A,P,S,Q-6,021P-6A) General (021 E-6, 021 P-6B, 021 S-6A) Power train hydraulic system (021A,P,S,Q-6,021P-6A) Power train hydraulic circuit diagram (021 A, P, S, Q-6, 021 P-6A) Power train hydraulic system (021E-6,021P-6B,021S-6A) Power train hydraulic circuit diagram (021 E-6, 021 P-6B, 021 S-6A) Main clutch (020-6) Main clutch control (020-6) Tramsmission (020-6) Oamper and universal joint (021A,P,S,Q-6,021P-6A) Oamper and universal joint (021 E-6, 021 P-6B, 021 P-6A) HYOOROSHTFT transmission (021A, P, S, Q-6, 021 P-6A) HYOOROSHIFT transmission (021 E-6, 021 P-6B, 021 S-6A) Transmissoion control (021 A, P, S, Q-6, 021 P-6A) Transmissoion control (021 E-6, 021 P-6B, 021 S-6A) HYOOROSHIFT transmission hydraulic system (021A,P,S,Q-6,021A-6A) HYOOROSHIFT transmissoin hydraulic circuit diagram (021 A, P, S, Q-6, 021 P-6A) HYOOROSHIFT transmission hydraulic system (021 E-6, 021 P-6B, 021 S-6A) HYOOROSHIFT transmission hydraulic ciucuit diagram (021 E-6, 021 P-6B, 021 S-6A) Transmission control valve (021A,P,S,Q-6,021P-6A) Transmission control valve (021 E-6, 021 P-6B, 021 S-6A) Transmission pump (021-6) Bevel gear shaft and steering clutch Steering control Steering hydraulic piping (020-6) Steering hydraulic piping (021-6) Steering hydraulic system (020-6) Steering hydraulic circuit diagram (020-6) Steering hydraulic system (021-6) Steering hydraulic circuit diagram (021-6) Main clutch and steering pump (020-6) Steering main relief valve (020-6) Steering control valve Steering booster cylinder Steering brake...,..., Final drive , J:!
6 POWER TRAIN Z2 TESTING AND AD~USTING Standard for testing and adjusting Testing and adjusting tool list ~..., Measurng oil pressure Measuring oil temperature Testing travel Measuring operating force... " Adjusting fuel control lever Adjusting main clutch control linkage Adjusting inching control linkage Adjusting gear shift lever control linkage Adjusting steering control linkage Adjusting brake control linkage Troubleshooting A When carrying out testing, adjusting or troubleshooting, stop the machine on level ground, install the safety pins and block the tracks. A When working in groups, use agreed signals and do not allow unauthorized persons near the machine. A When checking the water level in the radiator, wait for the water to cool. Do not remove the radiator cap while the water is hot. Boiling water may spurt out. A Be careful not to get caught in rotating parts. 020, CD
7 POWER TRAIN 23 DISASSEMBLY AND ASSEMBLY MAIN CLUTCH (D20-6) Removal and Installation Disassembly Assembly... ~ TRANSMISSION (D20-6) Removal and Installation Disassembly Assembly DAMPER (D21-6) Removal and Installation HYDROSHIFT TRANSMISSION (D21-6) Removal Installation Disassembly (D21 A,P,S,Q-6, D21 P-6A) Assembly (D21 A,P,S,Q-6, D21 P-6A) Disassembly (021 E-6, D21 P"-6B, D21 S-6A) Assembly (D21 E-6, D21 P-6B, D21 S-6A) TRANSMISSION PUMP (D21-6) Removal Installation MODULATING VALVE (D21-6) Removal and Installation Disassembly and Assembly STEERING PUMP (D20-6) Removal and Installation STEERING MAIN RELIEF VALVE (D20-6) Removal and Installation STEERING VALVE Removal and Installation Disassembly and Assembly STEERIGN CLUTCH Removal Installation Disassembly Assembly BEVEL GEAR SHAFT AND BEVEL GEAR Removal Installation FINAL DRIVE Removal and Installation FINAL DRIVE FIRST PINION Removal and Installation: FINAL DRIVE Disassembly Assembly SELECTOR AND INCHING VALVE (D21-6) Removal and Installation Disassembly and Assembly D20, ~
8 POWER TRAIN 24 MAINTENANCE STANDARD Main clutch (020-6) Main clutch and steering pump (020-6) Transmisson (020-6)... " 24-6 Oamper and universal joint (021-6) HYOOROSHIFT transmission (021A, P, S, 0-6, 021 P-6A) HYOOROSHIFT transmission. (021 E-6, 021 P-6B, 021 S-6A) Transmission control valve (021A,P,S,O-6,021P-6A) Transmission control valve (021 E-6, 021 P-6B, 021 S-6A) Transmission and steering pump (021-6)., Bevel gear shaft Steering clutch Steering main relief valve (020-6) Steering control valve Steering booster cylinder Steering brake Final drive ,
9 UNDERCARRIAGE 3I STRUCTURE AND FUNCTION Track (dry type track link) (020,21 A, E, P-6) Track (lubricated track link) (021, 21A, E, P-6) Track (dry type track link) (020,215,0-6) Track (lubricated track link) (020,215,0-6) Track group (020, 21A, P, 5, Q-6, 020, 21 P-6A} Track group (021 E-6, 021 P-6B, A, 020,21 Pl-6, 021 PLl-6) Idler.... Idler cushion.... Track roller.... Carrier roller.... Main frame and suspension D
10 UNDERCARRIAGE 33 DISASSEMBLY AND ASSEMBLY TRACK FRAME Removal and Installation RECOIL SPRING Removal and Installation Disassembly and Assembly IDLER Removal and Installation CARRIER ROLLER Removal and Installation TRACK SHOE (020,21,A,E,S,Q-6, 020,21 P-6A,B) Removal and Installation (020,21 P,PL-6) Removal and Installation ,
11 UNDERCARRIAGE 34 MAINTENANCE STANDARD Track (dry type track link) ( A. E. P-6)..., Track (lubricated track link) ( A. E. P-6) Track (dry type track link) ( S. Q-6) Track Uubricated track link) ( S. Q-6) Track frame Idler cushion Idler Track roller Carrier roller...,..., D20,
12 HYDRAULIC SYSTEM 61: STRUCTURE AND FUNCTION Hydraulic piping (020,21 A, E-6, 020, 21 P-6A, Bl Hydraulic control (020,21 A, E-6, 020, 21 P-6A, Bl Hydraulic circuit system (020,21 A, E-6, 020, 21 P-6A, Bl Hydraulic circuit diagram (020,21 A, E-6, 020, 21 P-6A, Bl Hydraulic piping (020,21 P, PL, PLL-6l.... Hydraulic control (020, 21 P, PL, PLL-6l.... Hydraulic circuit system (020,21 p, PL, PLL-6l.... Hydraulic circuit diagram (020,21 P, PL, PLL-6l.... Hydraulic piping (020,21 S, 0-6, 021 S-6Al.... Hydraulic control (020,21 S, 0-6, 021 S-6Al.... Hydraulic circuit system (020, 21S, 0-6, 021A-6Al.... Hydraulic circuit diagram (020,21 S, 0-6, 021 S-6Al.... Hydraulic tank and filter.... Hydraulic pump.... Hydraulic control valve (020, 21A, E-6, 020, 21 P-6A, B) Hydraulic control valve (020, 21P,PL,PLL-6} Hydraulic control valve (020, 21S, 0-6, 021S-6A} Hydraulic lever operation (020, 21A, E, P-6) Hydraulic lever operation (020,21 S, 0-6).., Hydraulic cylinder (020,21 A, E-6, 020,21 P-6A, B) Hydraulic cylinder (020, 21 P, PL, PLL-6) Hydraulic cylinder (020,21 S, 0-6, 021 S-6Al ,
13 HYDRAULIC PIPING 020, 21 A-6, 021 E-6, 020, 21P-6A, 021P-68 5 I03F Hydraulic tank 2. Hydraulic pump 3. Hydraulic control valve 4. Blade lift cylinder 5. Blade angle cylinder 6. Blade tilt cylinder 7. Hydraulic filter OUTLINE The oil in hydraulic tank (1) is sucked up by hydraulic pump (2) installed to the engine, and is sent to hydraulic control valve (3). The hydraulic control valve sets the pressure in the circuit to 155 kg/cm2.lt switches the flow of oil to lift cylinder (4), angle cylinder (5), or tilt cylinder (6) to operate the blade according to the movement of the work equipment control lever. If the hydraulic control valve is at the "HOLD" position, the oil enters hydraulic filter (7) installed to the hydraulic tank and returns to the hydraulic tank. The hydraulic filter is a cartridge type with a filtering precision of 10 J.l, and a maximum filteririg rate of 1 OOX~/min, and the normal pressure is set to 1.5 kg/ cm2 The total capacity of the hydraulic tank is 33 liters, with the amount of oil inside the tank set to 20 litres ,21-6
14 HYDRAULIC SYSTEM 62- TESTING AND AD'--'USTING Standard for testing and adjusting Testing and adjusting tool list Measuring and adjusting oil pressure Measuring oil temperature Bleeding air from angle cylinder head circuit Testing travel Measuring operating force Testing performance of work equipment Measuring hydraulic drift of work equipment Troubleshooting A When carrying out testing, adjusting or troubleshooting, stop the machine on level ground, install the safety pins and block the tracks. A When working in groups, use agreed signals and do not allow unauthorized persons near the machil)e. A When checking the water level in the radiator, wait for the water to cool. Do not remove the radiator cap while the water is hot Boiling water may spurt out. A Be careful not to get caught in rotating parts. A Bleeding air from hydraulic cylinder. After replacing or installing hydraulic cylinders or hydraulic piping, bleed the air from the hydraulic cylinders as follows: 1. Start the engine and run at idling for about 5 minutes. 2. Run the engine at low idling, and raise and lower the work equipment 4-5 times. * Stop the piston rod about 100 mm from the end of the stroke. Never operate it to the relief position. 3. Run the engine at full throttle and repeat the above procedure. Then run the engine at low idling and operate the piston rod to the end of the stroke to relieve the circuit. 020, ,.
15 HYDRAULIC SYSTEM 63 OISASSEMBL Y AND ASSEMBLY HYDRAULIC PUMP Removal and Installation HYDRAULIC CONTROL VALVE Removal and Installation Disassembly (020,21 A,E-6, 020,21 P-6A,B) 63-4 Assembly (020,21 A,E-6, 020,21 P-6A,B) 63-6 Disassembly (020,21 P,PL-6) 63-8 Assembly (020,21 P,PL-6) Disassembly (020,21 S,0-6) Assembly (020,21 S,0-6) BLADE LIFT CYLINDER Removal and Installation BLADE ANGLE CYLINDER Removal and Installation BLADE TILT CYLINDER Removal and Installation B BUCKET LIFT CYLINDER Removal and Installation... ; BUCKET DUMP CYLINDER Removal and Installation HYDRAULIC CYLINDER Disassembly Assembly , C~)
16 HYDRAULIC SYSTEM 64 MAINTENANCE STANDARD Hydraulic control velve (020,21A,E-6, 020, 21 P-SA, B) Hydraulic control valve (020,21 P, PL, PLL ~ Hydraulic control valve (020, 21 S, 0-6, 021 S-6A) Hydraulic cylinder (020, 21 A, E, P Hydraulic cylinder (020,21 S, 0-6, 021 S-SA) Hydraulic pump ,
17 WORK EQUIPMENT 71. STRUCTURE AND FUNCTION Power angle and tiltdozer (020, 21 A, E-6, 020, 21 P-6A, B) Strainght tiltdozer (020, 21 P, PL, PLL-6) Bucket and link (020,21S,Q-6,021S-6A).71-6 D20,
18 WORK EQUIPMENT 73 DISASSEMBLY AND ASSEMBLY WORK EQUIPMENT Removal and Installation... ; BLADE Removal and Installation... : WORK EQUIPMENT Removal and Installation..., BUCKET Removal and Installation , ~
19 WORK EQUIPMENT 74 MAINTENANCE STANDARD Power angle and tiltdozer (020,21A,E-6,020, 21P-6A,Bl trainghttiltdozer (020, 21 P, PL, PLL-6l Bucket and link (020,215, 0-6, D215-6Al D20,
20 ELECTRICAL SYSTEM 81 STRUCTURE AND FUNCTION Wiring dyagram
Service Manual. D31E-18, D31P-18 D31P-18A, D31PL-18, D31PLL-18, D31S-18, D31Q-18, D37E-2 & D37P-2 Chassis Only
Komatsu Service Manual D31E-18, D31P-18 D31P-18A, D31PL-18, D31PLL-18, D31S-18, D31Q-18, D37E-2 & D37P-2 Chassis Only Service Manual THIS IS A MANUAL PRODUCED BY JENSALES INC. WITHOUT THE AUTHORIZATION
More information951B Traxcavator S/n 79H, 32F, 69H & 86J Volume 1 of 2
Caterpillar Service Manual 91B Traxcavator S/n 79H, 2F, 9H & 8J Volume 1 of 2 Service Manual THIS IS A MANUAL PRODUCED BY JENSALES INC. WITHOUT THE AUTHORIZATION OF CATERPILLAR OR IT S SUCCESSORS. CATERPILLAR
More informationJohn Deere. MODEL: 450-C Crawler JD-O-OMT71338
John Deere MODEL: 450-C Crawler THIS IS A MANUAL PRODUCED BY JENSALES INC. WITHOUT THE AUTHORIZATION OF JOHN DEERE OR IT'S SUCCESSORS. JOHN DEERE AND IT'S SUCCESSORS ARE NOT RESPONSIBLE FOR THE QUALITY
More information1150B Volume 1 of 3
J.I. Case Service Manual 1150B 1965-1978 Volume 1 of 3 Service Manual THIS IS A MANUAL PRODUCED BY JENSALES INC. WITHOUT THE AUTHORIZATION OF J.I. CASE OR IT S SUCCESSORS. J.I. CASE AND IT S SUCCESSORS
More information941 Traxcavator S/n 16U, 70H, 80H & up
Caterpillar Service Manual 941 Traxcavator S/n 16U, 70H, 80H & up Service Manual THIS IS A MANUAL PRODUCED BY JENSALES INC. WITHOUT THE AUTHORIZATION OF CATERPILLAR OR IT S SUCCESSORS. CATERPILLAR AND
More information955L Traxcavator S/n 64J, 71J & 85J Volume 1 of 2
Caterpillar Service Manual 955L Traxcavator S/n 64J, 71J & 85J Volume 1 of 2 Service Manual THIS IS A MANUAL PRODUCED BY JENSALES INC. WITHOUT THE AUTHORIZATION OF CATERPILLAR OR IT S SUCCESSORS. CATERPILLAR
More informationParts Manual. 450C & 455C Crawler
J.I. Case Parts Manual 450C & 455C Crawler Parts Manual THIS IS A MANUAL PRODUCED BY JENSALES INC. WITHOUT THE AUTHORIZATION OF J.I. CASE OR IT S SUCCESSORS. J.I. CASE AND IT S SUCCESSORS ARE NOT RESPONSIBLE
More informationD6 Crawler S/n 37A1 & 44A1 & up
Caterpillar Service Manual D6 Crawler S/n 37A1 & 44A1 & up Service Manual THIS IS A MANUAL PRODUCED BY JENSALES INC. WITHOUT THE AUTHORIZATION OF CATERPILLAR OR IT S SUCCESSORS. CATERPILLAR AND IT S SUCCESSORS
More informationJohn Deere. MODEL: 350C Crawler Loader, Bulldozer JD-O-OMT79469
John Deere MODEL: 350C Crawler Loader, Bulldozer THIS IS A MANUAL PRODUCED BY JENSALES INC. WITHOUT THE AUTHORIZATION OF JOHN DEERE OR IT'S SUCCESSORS. JOHN DEERE AND IT'S SUCCESSORS ARE NOT RESPONSIBLE
More informationD8 S/n 1H, 8R, 2U, & 13A
Caterpillar Service Manual D8 S/n 1H, 8R, 2U, & 13A Service Manual THIS IS A MANUAL PRODUCED BY JENSALES INC. WITHOUT THE AUTHORIZATION OF CATERPILLAR OR IT S SUCCESSORS. CATERPILLAR AND IT S SUCCESSORS
More informationD5 Crawler S/n 6R, 12R, 50J, 54J, 62J, 63J, 67J, 68J, 93J, 95J, 96J & 97J Volume 1 of 2
Caterpillar Service Manual D5 Crawler S/n 6R, 12R, 50J, 54J, 62J, 6J, 67J, 68J, J, 5J, 6J & 7J Volume 1 of 2 Service Manual THIS IS A MANUAL PRODUCED BY JENSALES INC. WITHOUT THE AUTHORIZATION OF CATERPILLAR
More information955L Traxcavator S/N 8Y1, 13X1, & 57M1 Volume 1 of 3
Caterpillar Service Manual 955L Traxcavator S/N 8Y1, 13X1, & 57M1 Volume 1 of 3 Service Manual THIS IS A MANUAL PRODUCED BY JENSALES INC. WITHOUT THE AUTHORIZATION OF CATERPILLAR OR IT S SUCCESSORS. CATERPILLAR
More informationNET HORSEPOWER 29.5 kw rpm OPERATING WEIGHT D21A-8: 3940 kg 8,690 lb D21P-8: 4240 kg 9,350 lb
NET HORSEPOWER 29.5 kw 40 HP @ 2450 rpm OPERATING WEIGHT D21A-8: 3940 kg 8,690 lb D21P-8: 4240 kg 9,350 lb D21A-8 D21P-8 D 21 CRAWLER DOZER Photos may include optional equipment. D21A/P-8 C R A W L E R
More informationD6 & D6C Crawlers S/n 74A1, 76A1, 41A1, 71A1, 73A1, 82A1 & 96A1 & up
Caterpillar Service Manual D6 & D6C Crawlers S/n 74A, 76A, 4A, 7A, 73A, 82A & 96A & up Service Manual THIS IS A MANUAL PRODUCED BY JENSALES INC. WITHOUT THE AUTHORIZATION OF CATERPILLAR OR IT S SUCCESSORS.
More information500 Series C Crawler
International Harvester Service Manual 500 Series C Crawler Service Manual THIS IS A MANUAL PRODUCED BY JENSALES INC. WITHOUT THE AUTHORIZATION OF INTERNATIONAL HARVESTER OR IT S SUCCESSORS. INTERNATIONAL
More informationD58E-1 D58P-1. HORSEPOWER 130 HP 97 kw. BLADE CAPACITY Up to 4.2 yd 3 3.2m 3 CRAWLER D58-1 DOZER D58-1
D58E-1 D58P-1 HORSEPOWER 130 HP 97 kw BLADE CAPACITY Up to 4.2 yd 3 3.2m 3 D58-1 CRAWLER D58-1 DOZER D58E-1, D58P-1 CRAWLER DOZER Flywheel Horsepower: 130 HP 97 kw @ 1900 RPM Operating Weight: D58E-1:
More informationJohn Deere. MODEL: 4230 Tractor Volume 1 of 2 JD-S-TM1056
John Deere MODEL: 4230 Tractor Volume 1 of 2 THIS IS A MANUAL PRODUCED BY JENSALES INC. WITHOUT THE AUTHORIZATION OF JOHN DEERE OR IT'S SUCCESSORS. JOHN DEERE AND IT'S SUCCESSORS ARE NOT RESPONSIBLE FOR
More informationService Manual 344 & 384
Leyland Service Manual 344 & 384 Service Manual THIS IS A MANUAL PRODUCED BY JENSALES INC. WITHOUT THE AUTHORIZATION OF LEYLAND OR IT S SUCCESSORS. LEYLAND AND IT S SUCCESSORS ARE NOT RESPONSIBLE FOR THE
More informationParts Manual. Parts Manual AC-P-6080
Allis Chalmers Parts Manual 6080 Parts Manual THIS IS A MANUAL PRODUCED BY JENSALES INC. WITHOUT THE AUTHORIZATION OF ALLIS CHALMERS OR IT S SUCCESSORS. ALLIS CHALMERS AND IT S SUCCESSORS ARE NOT RESPONSIBLE
More informationTD-7C, TD-7E, TD-8C, TD-8E, 100C, 100E, 125C & 125E Crawlers
International Harvester Service Manual TD-7C, TD-7E, TD-8C, TD-8E, 100C, 100E, 125C & 125E Crawlers Service Manual THIS IS A MANUAL PRODUCED BY JENSALES INC. WITHOUT THE AUTHORIZATION OF INTERNATIONAL
More informationSALES INC. WITHOUT THE AUTHORIZATION OF ORS. J.I. CASE AND IT'S SUCCESSORS HE QUALITY OR ACCURACY OF THIS MANUAL.
of 3 SALES INC. WITHOUT THE AUTHORIZATION OF ORS. J.I. CASE AND IT'S SUCCESSORS HE QUALITY OR ACCURACY OF THIS MANUAL. ONTAINED AND USED HEREIN ARE THOSE OF OTHERS, PTIVE SENSE TO REFER TO THE PRODUCTS
More informationD3 Crawler S/n 6N1 & 79U1 & up Volume 1 of 2
Caterpillar Service Manual D3 Crawler S/n 6N1 & 79U1 & up Volume 1 of 2 Service Manual THIS IS A MANUAL PRODUCED BY JENSALES INC. WITHOUT THE AUTHORIZATION OF CATERPILLAR OR IT S SUCCESSORS. CATERPILLAR
More information900, 910, 1100 & 1110
Long Service Manual 900, 910, 1100 & 1110 Service Manual THIS IS A MANUAL PRODUCED BY JENSALES INC. WITHOUT THE AUTHORIZATION OF LONG OR IT S SUCCESSORS. LONG AND IT S SUCCESSORS ARE NOT RESPONSIBLE FOR
More information630, 631 & 632 Bobcat & Melroe Bobcat
Bobcat 630, 631 & 632 Bobcat & Melroe Bobcat THIS IS A MANUAL PRODUCED BY JENSALES INC. WITHOUT THE AUTHORIZATION OF BOBCAT OR IT S SUCCESSORS. BOBCAT AND IT S SUCCESSORS ARE NOT RESPONSIBLE FOR THE QUALITY
More information3304 Engine S/n 43V, 46V, 48V, 78P, 9Z, 7Z & 12Z
Caterpillar Service Manual 3304 Engine S/n 43V, 46V, 48V, 78P, 9Z, 7Z & 12Z Service Manual THIS IS A MANUAL PRODUCED BY JENSALES INC. WITHOUT THE AUTHORIZATION OF CATERPILLAR OR IT S SUCCESSORS. CATERPILLAR
More informationJohn Deere. MODEL: 420 Series Volume 1 of 2
John Deere MODEL: 420 Series Volume 1 of 2 THIS IS A MANUAL PRODUCED BY JENSALES INC. WITHOUT THE AUTHORIZATION OF JOHN DEERE OR IT'S SUCCESSORS. JOHN DEERE AND IT'S SUCCESSORS ARE NOT RESPONSIBLE FOR
More informationMODEL: 310A and 3108 Tractor, Loader and Backhoe Volume 1 of 2
John Deere MODEL: 310A and 3108 Tractor, Loader and Backhoe Volume 1 of 2 THIS IS A MANUAL PRODUCED BY JENSALES INC. WITHOUT THE AUTHORIZATION OF JOHN DEERE OR IT'S SUCCESSORS. JOHN DEERE AND IT'S SUCCESSORS
More informationJohn Deere. MODEL: 8430 & 8630 Volume 1 of 2 JD-S-TM1143
John Deere MODEL: 8430 & 8630 Volume 1 of 2 THIS IS A MANUAL PRODUCED BY JENSALES INC. WITHOUT THE AUTHORIZATION OF JOHN DEERE OR IT'S SUCCESSORS. JOHN DEERE AND IT'S SUCCESSORS ARE NOT RESPONSIBLE FOR
More informationD9 & D9G Crawler S/n 66A1 to 66A3265
Caterpillar Service Manual D9 & D9G Crawler S/n 66A to 66A65 Service Manual THIS IS A MANUAL PRODUCED BY JENSALES INC. WITHOUT THE AUTHORIZATION OF CATERPILLAR OR IT S SUCCESSORS. CATERPILLAR AND IT S
More informationMT373D, MT373, S373D, S373, & Beaver III
Mitsubishi Operator s Manual MT373D, MT373, S373D, S373, & Beaver III Operator s Manual THIS IS A MANUAL PRODUCED BY JENSALES INC. WITHOUT THE AUTHORIZATION OF MITSUBISHI OR IT S SUCCESSORS. MITSUBISHI
More informationParts Manual 1250A, 1255
Oliver Parts Manual 250A, 255 Parts Manual THIS IS A MANUAL PRODUCED BY JENSALES INC. WITHOUT THE AUTHORIZATION OF OLIVER OR IT S SUCCESSORS. OLIVER AND IT S SUCCESSORS ARE NOT RESPONSIBLE FOR THE QUALITY
More informationD5B & D5E Crawlers S/n 22X1, 23X1,24X1, 25X1, 43X1, 44X1, 45X1, 46X1, 47X1, 48X1 & 49X1 & up Volume 1 of 3
Caterpillar Service Manual D5B & D5E Crawlers S/n 22X1, 23X1,24X1, 25X1, 43X1, 44X1, 45X1, 46X1, 47X1, 48X1 & 49X1 & up Volume 1 of 3 Service Manual THIS IS A MANUAL PRODUCED BY JENSALES INC. WITHOUT THE
More informationService Manual. 1320, 1520 and 1720
Service Manual Service Manual 1320, 1520 and 1720 THIS IS A MANUAL PRODUCED BY JENSALES INC. WITHOUT THE AUTHORIZATION OF NEW HOLLAND OR IT S SUCCESSORS. NEW HOLLAND AND IT S SUCCESSORS ARE NOT RESPONSIBLE
More informationService Manual H4, HD4
Allis Chalmers Service Manual H4, HD4 Service Manual THIS IS A MANUAL PRODUCED BY JENSALES INC. WITHOUT THE AUTHORIZATION OF ALLIS CHALMERS OR IT S SUCCESSORS. ALLIS CHALMERS AND IT S SUCCESSORS ARE NOT
More information550 & 555 Tractor, Loader & Backhoe Volume 1 of 2
Ford Service Manual 550 & 555 Tractor, Loader & Backhoe Volume 1 of 2 Service Manual THIS IS A MANUAL PRODUCED BY JENSALES INC. WITHOUT THE AUTHORIZATION OF FORD OR IT S SUCCESSORS. FORD AND IT S SUCCESSORS
More information1180, 1180DT, 1280, 1280DT, 1380, 1380DT, 1580, 1580DT, 1880 & 1880DT
Fiat Service Manual 1180, 1180DT, 1280, 1280DT, 1380, 1380DT, 1580, 1580DT, 1880 & 1880DT Service Manual THIS IS A MANUAL PRODUCED BY JENSALES INC. WITHOUT THE AUTHORIZATION OF FIAT OR IT S SUCCESSORS.
More informationJohn Deere. MODEL: 4320 Tractor JD-S-TM1029
John Deere MODEL: 4320 Tractor THIS IS A MANUAL PRODUCED BY JENSALES INC. WITHOUT THE AUTHORIZATION OF JOHN DEERE OR IT'S SUCCESSORS. JOHN DEERE AND IT'S SUCCESSORS ARE NOT RESPONSIBLE FOR THE QUALITY
More informationService Manual. MF1085 Diesel
Massey Harris Massey Ferguson Service Manual MF1085 Diesel Service Manual THIS IS A MANUAL PRODUCED BY JENSALES INC. WITHOUT THE AUTHORIZATION OF MASSEY HARRIS MASSEY FERGUSON OR IT S SUCCESSORS. MASSEY
More informationD41E-6 D41P-6. HORSEPOWER 105 HP 78 kw BLADE CAPACITY 3.4 yd m 3 CRAWLER DOZER D41-6
D41E-6 HORSEPOWER 105 HP 78 kw BLADE CAPACITY 3.4 yd 3 2.6 m 3 CRAWLER DOZER D41-6 H i g h P r o d u c t i v i t y Powerful, Fuel-Efficient Engine: The Komatsu S6D102E engine is a fuelefficient, direct-injection
More informationD4 Crawler S/n 24A, 39A, 40A, 54A, 55A & 69A
Caterpillar Service Manual D Crawler S/n A, 9A, A, A, A & 69A Service Manual THIS IS A MANUAL PRODUCED BY JENSALES INC. WITHOUT THE AUTHORIZATION OF CATERPILLAR OR IT S SUCCESSORS. CATERPILLAR AND IT S
More information1090, 1170 & 1175 Volume 1 of 2
J.I. Case Service Manual 1090, 1170 & 1175 Volume 1 of 2 Service Manual THIS IS A MANUAL PRODUCED BY JENSALES INC. WITHOUT THE AUTHORIZATION OF J.I. CASE OR IT S SUCCESSORS. J.I. CASE AND IT S SUCCESSORS
More informationJohn Deere. MODEL: 2840 Tractor JD-O-OML32582
John Deere MODEL: 2840 Tractor THIS IS A MANUAL PRODUCED BY JENSALES INC. WITHOUT THE AUTHORIZATION OF JOHN DEERE OR IT'S SUCCESSORS. JOHN DEERE AND IT'S SUCCESSORS ARE NOT RESPONSIBLE FOR THE QUALITY
More informationJohn Deere. MODEL: 5448 Loader Volume 1 of 2 JD-S-TM1094
John Deere MODEL: 5448 Loader Volume 1 of 2 THIS IS A MANUAL PRODUCED BY JENSALES INC. WITHOUT THE AUTHORIZATION OF JOHN DEERE OR IT'S SUCCESSORS. JOHN DEERE AND IT'S SUCCESSORS ARE NOT RESPONSIBLE FOR
More informationCX800B EXCAVATOR. Number of rollers Top, each track 3 Bottom, each track 9 Number of shoes Double grouser each side 51
CX800B EXCAVATOR TIER III CERTIFIED ENGINE Model Type AH-6WG1XYSS, Tier III certified 4-stroke, turbocharged Cylinders 6 Bore/ Displacement Fuel injection Fuel Fuel filter Cooling Horsepower per SAE J1349
More informationParts Manual. Parts Manual AC-P-6060
Allis Chalmers Parts Manual 6060 Parts Manual THIS IS A MANUAL PRODUCED BY JENSALES INC. WITHOUT THE AUTHORIZATION OF ALLIS CHALMERS OR IT S SUCCESSORS. ALLIS CHALMERS AND IT S SUCCESSORS ARE NOT RESPONSIBLE
More information3306 Diesel Engine S/n 8Z, 10Z, & 13Z
Caterpillar Service Manual 3306 Diesel Engine S/n 8Z, 10Z, & 13Z Service Manual THIS IS A MANUAL PRODUCED BY JENSALES INC. WITHOUT THE AUTHORIZATION OF CATERPILLAR OR IT S SUCCESSORS. CATERPILLAR AND IT
More informationJohn Deere. MODEL: 4620 Tractor JD-S-TM1030
John Deere MODEL: 4620 Tractor THIS IS A MANUAL PRODUCED BY JENSALES INC. WITHOUT THE AUTHORIZATION OF JOHN DEERE OR IT'S SUCCESSORS. JOHN DEERE AND IT'S SUCCESSORS ARE NOT RESPONSIBLE FOR THE QUALITY
More informationCX17BCOMPACT EXCAVATOR
CX17BCOMPACT EXCAVATOR ENGINE Model Mitsubishi L3E-W231KBS Cylinders 3 Bore/Stroke Displacement Fuel injection Fuel injection pump Fuel Fuel filter Cooling 2.99 in x 2.76 in (76 x 70 mm) 58.1 in 3 (952
More informationJohn Deere MODEL: SIn 0-349,999 JD-S-TM4301
John Deere MODEL: 2240 SIn 0-349,999 THIS IS A MANUAL PRODUCED BY JENSALES INC. WITHOUT THE AUTHORIZATION OF JOHN DEERE OR IT'S SUCCESSORS. JOHN DEERE AND IT'S SUCCESSORS ARE NOT RESPONSIBLE FOR THE QUALITY
More informationNumber of rollers Top, each track 3 Bottom, each track 8 Number of shoes Double grouser each side 47. Variable displacement axial piston design
CX700B EXCAVATOR TIER III CERTIFIED ENGINE Model Type AH-6WG1XYSS, Tier III certified 4-stroke, turbocharged Cylinders 6 Bore/Stroke Displacement 5.79 in x 6.07 in (147 x 154 mm) 957 in 3 (15 700 cc) Grade
More information1920 & 2120 Compact Tractors Volume 1 of 2
Ford Service Manual 1920 & 2120 Compact Tractors Volume 1 of 2 Service Manual THIS IS A MANUAL PRODUCED BY JENSALES INC. WITHOUT THE AUTHORIZATION OF FORD OR IT S SUCCESSORS. FORD AND IT S SUCCESSORS ARE
More informationA 1 SERVICE SPECIFICATIONS
A1 A2 Clutch CLUTCH Specifications Pedal height (from asphalt sheet) Release point (from pedal stroke end position) Push rod play at pedal top Pedal freeplay Disc rivet head depth Disc runout Diaphragm
More informationService Manual. 555 Motor Grader
Wabco Service Manual 555 Motor Grader Service Manual THIS IS A MANUAL PRODUCED BY JENSALES INC. WITHOUT THE AUTHORIZATION OF WABCO OR IT S SUCCESSORS. WABCO AND IT S SUCCESSORS ARE NOT RESPONSIBLE FOR
More informationS-373, S-470, Beaver III & Buck
Satoh Service Manual S-373, S-470, Beaver III & Buck Service Manual THIS IS A MANUAL PRODUCED BY JENSALES INC. WITHOUT THE AUTHORIZATION OF SATOH OR IT S SUCCESSORS. SATOH AND IT S SUCCESSORS ARE NOT RESPONSIBLE
More informationJohn Deere. MODEL: 440 Diesel Industrial Crawler JD-O-OMT73459
John Deere MODEL: 440 Diesel Industrial Crawler THIS IS A MANUAL PRODUCED BY JENSALES INC. WITHOUT THE AUTHORIZATION OF JOHN DEERE OR IT'S SUCCESSORS. JOHN DEERE AND IT'S SUCCESSORS ARE NOT RESPONSIBLE
More informationJohn Deere. MODEL: 2030 Tractor JD-S-TM10S1
John Deere MODEL: 2030 Tractor THIS IS A MANUAL PRODUCED BY JENSALES INC. WITHOUT THE AUTHORIZATION OF JOHN DEERE OR IT'S SUCCESSORS. JOHN DEERE AND IT'S SUCCESSORS ARE NOT RESPONSIBLE FOR THE QUALITY
More informationCummins / 6CTA8.3-C or Rhino Tier 2 (Tier 3, Tier 4) 6 8.3(506) 188(252) Direct Injection Turbocharged, air-to-air charge air cooler COOLING Fan Drive
330 EXCAVATOR ENGINE Engine Make/ Engine Model Emission Rating (optional) Cylinders Displacement L (cu. In) Net Power kw (Hp) @2,200 rpm Fuel System Aspiration Cummins / 6CTA8.3-C or Rhino Tier 2 (Tier
More informationHYDRAULIC EXCAVATOR. PC210LC-8M0 Super Long Front PC210LC-8M0
GROSS HORSEPOWER 110 KW 147 HP NET HORSEPOWER 103 KW 138 HP OPERATING WEIGHT 23,350 kg MAX HORIZONTAL REACH 15,240 mm Super Long Front PC 210 HYDRAULIC EXCAVATOR H Y D R A U L I C E X C A V A T O R WALK
More informationMODEL: 4640 & 4840 Chassis Only Volume 1 of 3
John Deere MODEL: 4640 & 4840 Chassis Only Volume 1 of 3 THIS IS A MANUAL PRODUCED BY JENSALES INC. WITHOUT THE AUTHORIZATION OF JOHN DEERE OR IT'S SUCCESSORS. JOHN DEERE AND IT'S SUCCESSORS ARE NOT RESPONSIBLE
More informationMODEL: 2440 & 2640 Tractors
John Deere MODEL: 2440 & 2640 Tractors THIS IS A MANUAL PRODUCED BY JENSALES INC. WITHOUT THE AUTHORIZATION OF JOHN DEERE OR IT'S SUCCESSORS. JOHN DEERE AND IT'S SUCCESSORS ARE NOT RESPONSIBLE FOR THE
More informationJohn Deere. MODEL: 510 Round Baler JD-O-OME59945
John Deere MODEL: 510 Round Baler THIS IS A MANUAL PRODUCED BY JENSALES INC. WITHOUT THE AUTHORIZATION OF JOHN DEERE OR IT'S SUCCESSORS. JOHN DEERE AND IT'S SUCCESSORS ARE NOT RESPONSIBLE FOR THE QUALITY
More information2-135, & Chassis & Engine Chassis Only Volume 1 of 2
White Service Manual 2-135, 2-155 & 2-180 Chassis & Engine 4-210 Chassis Only Volume 1 of 2 Service Manual THIS IS A MANUAL PRODUCED BY JENSALES INC. WITHOUT THE AUTHORIZATION OF WHITE OR IT S SUCCESSORS.
More information4366, 4386, 4568, 4586 & 4786 Chassis Only
International Harvester Service Manual 4366, 4386, 4568, 4586 & 4786 Chassis Only Service Manual THIS IS A MANUAL PRODUCED BY JENSALES INC. WITHOUT THE AUTHORIZATION OF INTERNATIONAL HARVESTER OR IT S
More information1150D & 1155D Crawler Volume 1 of 3
J.I. Case Service Manual 1150D & 1155D Crawler Volume 1 of 3 Service Manual THIS IS A MANUAL PRODUCED BY JENSALES INC. WITHOUT THE AUTHORIZATION OF J.I. CASE OR IT S SUCCESSORS. J.I. CASE AND IT S SUCCESSORS
More informationADJUSTING VALVE CLEARANCE
ADJUSTING VALVE CLEARANCE ADJUSTING VALVE CLEARANCE a Adjusting instrument for valve clearance 4. While the No. 1 cylinder is at the compression top dead center, adjust the valve clearances marked with
More informationJohn Deere. MODEL: 2140 Volume 1 of 3 JD-S-TM4373
John Deere MODEL: 2140 Volume 1 of 3 THIS IS A MANUAL PRODUCED BY JENSALES INC. WITHOUT THE AUTHORIZATION OF JOHN DEERE OR IT'S SUCCESSORS. JOHN DEERE AND IT'S SUCCESSORS ARE NOT RESPONSIBLE FOR THE QUALITY
More information303E CR. Mini Hydraulic Excavator. Engine Gross Power 18.5 kw 24.8 hp Net Power 17.5 kw 23.5 hp
303E CR Mini Hydraulic Excavator Engine Gross Power 18.5 kw 24.8 hp Net Power 17.5 kw 23.5 hp Weight Operating Weight with Canopy 3310 kg 7,297 lb Operating Weight with Cab 3530 kg 7,782 lb The Cat 303E
More informationComplete Component Catalog
Complete Component Catalog Valuepart for the Best in Quality Valuepart is committed to providing customers with the Highest Quality products available in the industry. Rigid Quality and Application standards
More informationEQUIPMENT ENGINE HYDRAULIC SYSTEM
EQUIPMENT ENGINE Model... Isuzu AI-4JJ1X Type... 4-cycle water-cooled, direct injection Aspiration... Turbocharged, intercooled No. of cylinders... 4 Rated power ISO 9249, net... 90.2 kw (121 HP) at 2
More informationPARTS CATALOG BRUSHCUTTER BP530/EC1(36)
PARTS CATALOG BRUSHCUTTER 36004531 - P016-000440-11Fb 1. CYLINDER, MUFFLER 1 A130-001780 1 CYLINDER 2 V100-000450 1 GASKET CYLINDER 3 900105-05025 3 BOLT, H.S. 5*25 5*25 4 900105-05035 1 BOLT, H.S. 5*35
More information3400A & 3500A Payline-Hoe
International Harvester Service Manual 3400A & 3500A Payline-Hoe Service Manual THIS IS A MANUAL PRODUCED BY JENSALES INC. WITHOUT THE AUTHORIZATION OF INTERNATIONAL HARVESTER OR IT S SUCCESSORS. INTERNATIONAL
More informationEXCAVATOR STANDARD & DOZER BLADE EQUIPPED TIER 3 CERTIFIED
CX225 MSR EXCAVATOR STANDARD & DOZER BLADE EQUIPPED TIER 3 CERTIFIED ENGINE Model Type Isuzu AI-4HK1X, Tier 3 certified 4-stroke, turbocharged Cylinders 4 Displacement Bore/Stroke Fuel injection Fuel filter
More information303E CR. Mini Hydraulic Excavator
303E CR Mini Hydraulic Excavator Engine Weight Gross Power 18.5 kw 24.8 hp Operating Weight with Canopy 3048 kg 6,721 lb Net Power 17.5 kw 23.5 hp Operating Weight with Cab 3267 kg 7,204 lb The Cat 303E
More informationWith Tier 4 Interim Engine installed HYUNDAI HEAVY INDUSTRIES
With Tier 4 Interim Engine installed HYUNDAI HEAVY INDUSTRIES 1 Specifications R145LCR-9A ENGINE MODEL Type PERKINS 1204E Water cooled, 4 cycle Diesel, 4-Cylinders in line, direct injection, turbocharged,
More information440 & 443 Skid Steer
Bobcat 440 & 443 Skid Steer THIS IS A MANUAL PRODUCED BY JENSALES INC. WITHOUT THE AUTHORIZATION OF BOBCAT OR IT S SUCCESSORS. BOBCAT AND IT S SUCCESSORS ARE NOT RESPONSIBLE FOR THE QUALITY OR ACCURACY
More informationT-6, TD-6, T-9 & TD-9 Crawlers
International Harvester Service Manual T-6, TD-6, T-9 & TD-9 Crawlers Service Manual THIS IS A MANUAL PRODUCED BY JENSALES INC. WITHOUT THE AUTHORIZATION OF INTERNATIONAL HARVESTER OR IT S SUCCESSORS.
More informationJohn Deere. MODEL: 170 Skid Steer JD-S-TM107S
John Deere MODEL: 170 Skid Steer THIS IS A MANUAL PRODUCED BY JENSALES INC. WITHOUT THE AUTHORIZATION OF JOHN DEERE OR IT'S SUCCESSORS. JOHN DEERE AND IT'S SUCCESSORS ARE NOT RESPONSIBLE FOR THE QUALITY
More informationDX140LC TECHNICAL DATA
DX140LC TECHNICAL DATA GENERAL SPECIFICATIONS ITEMS UNIT STANDARD MODEL Doosan DL06 Diesel, Tier III Certified NUMBER OF CYLINDERS 6 RATED FLYWHEEL POWER hp / rpm 98.6 / 1,850 (hp PER SAE J1995) GROSS
More information1110 & 1210 Compact Diesel
Ford Service Manual 1110 & 1210 Compact Diesel Service Manual THIS IS A MANUAL PRODUCED BY JENSALES INC. WITHOUT THE AUTHORIZATION OF FORD OR IT S SUCCESSORS. FORD AND IT S SUCCESSORS ARE NOT RESPONSIBLE
More informationDX420LC TECHNICAL DATA
DX420LC TECHNICAL DATA GENERAL SPECIFICATIONS ITEMS UNIT STANDARD MODEL Doosan DV11 Diesel, Tier III Certified NUMBER OF CYLINDERS 6 RATED FLYWHEEL POWER hp / rpm 293 / 1,800 (hp PER SAE J1995) GROSS kw
More informationZAXIS DASH-5 Ultrashort-CLASS EXCAVATORS ZX245LC kw (159 hp)
ZAXIS DASH-5 Ultrashort-CLASS EXCAVATORS ZX245LC-5 119 kw (159 hp) ZX245LC-5 ZAXIS DASH-5 Ultrashort-CLASS EXCAVATORS Engine ZX245LC-5 Manufacturer and Model Isuzu 4HK1 Non-Road Emissions Standard EPA
More informationCX80C OPERATOR ENVIRONMENT
CX80C EXCAVATOR SWING BOOM TIER 4 FINAL CERTIFIED PRELIMINARY ENGINE Model Type Cylinders Isuzu AP-4LE2X, Tier 4 Final Certified Water-cooled, 4-cycle. Turbo-charged w/ air-cooled intercooler w/ DOC 4-cylinder
More informationCONTROL. No. of shoes on each side No. of carrier roller on each side No. of track roller on each side No. of rail guard on each side.
SPECIFICATIONS ENGINE Maker / Model Type Rated flywheel horse power SAE DIN Perkins 1204F Water-cooled, 4-cycle diesel, 4-cylinder inline, Direct injection, Turbocharged, Charge and air cooled J1995 (gross)
More information980 B Wheel Loader S/n 89P1 & Up Volume 1 of 2
Caterpillar Service Manual 980 B Wheel Loader S/n 89P1 & Up Volume 1 of 2 Service Manual THIS IS A MANUAL PRODUCED BY JENSALES INC. WITHOUT THE AUTHORIZATION OF CATERPILLAR OR IT S SUCCESSORS. CATERPILLAR
More informationParts Manual S/n 8001 & up
Allis Chalmers Parts Manual 7000 S/n 8001 & up Parts Manual THIS IS A MANUAL PRODUCED BY JENSALES INC. WITHOUT THE AUTHORIZATION OF ALLIS CHALMERS OR IT S SUCCESSORS. ALLIS CHALMERS AND IT S SUCCESSORS
More information830, 930, 1030, 1130 and 1630
John Deere MODEL: 830, 930, 1030, 1130 and 1630 THIS IS A MANUAL PRODUCED BY JENSALES INC. WITHOUT THE AUTHORIZATION OF JOHN DEERE OR IT'S SUCCESSORS. JOHN DEERE AND IT'S SUCCESSORS ARE NOT RESPONSIBLE
More informationRAMIRENT E62. Excavators Specifications. Dimensions
Dimensions (A) Blade height 410.0 mm (B) Clearance, upper structure to ground line 635.0 mm (C) Ground line to top of engine cover 1620.0 mm (D) Length of track on ground 1990.0 mm (E) Machine centre line
More informationJohn Deere MODEL: 2950 JD-O-OML39652
John Deere MODEL: 2950 THIS IS A MANUAL PRODUCED BY JENSALES INC. WITHOUT THE AUTHORIZATION OF JOHN DEERE OR IT'S SUCCESSORS. JOHN DEERE AND IT'S SUCCESSORS ARE NOT RESPONSIBLE FOR THE QUALITY OR ACCURACY
More information3388, 3588, 3788, 6388, 6588 & 6788 Volume 1 of 2
International Harvester Service Manual 3388, 3588, 3788, 6388, 6588 & 6788 Volume 1 of 2 Service Manual THIS IS A MANUAL PRODUCED BY JENSALES INC. WITHOUT THE AUTHORIZATION OF INTERNATIONAL HARVESTER OR
More informationJohn Deere. MODEL: 410 Backhoe Loader JD-O-OMT66840
John Deere MODEL: 410 Backhoe Loader THIS IS A MANUAL PRODUCED BY JENSALES INC. WITHOUT THE AUTHORIZATION OF JOHN DEERE OR IT'S SUCCESSORS. JOHN DEERE AND IT'S SUCCESSORS ARE NOT RESPONSIBLE FOR THE QUALITY
More informationXC 450 EFT Model Number A2013KCK4CETT SHARE OUR PASSION.
2013 XC 450 EFT Model Number A2013KCK4CETT TM SHARE OUR PASSION. TABLE OF CONTENTS 2013 XC 450 EFT Green (Model No. A2013KCK4CETT) FRONT BODY ASSEMBLY... 1 REAR BODY AND TAILLIGHT ASSEMBLY... 2 BUMPER,
More informationTechnical data. Part Thread (mm) Nm ±10% Tolerance Sidestand
section 3 - Torque settings Frame torque settings Sidestand Stand sensor bolt 5 Pre-applied threadlocker Stand plate fixing screw M10x25 43 Pre-applied threadlocker Side stand fastening pin Side stand
More informationOperator s Manual Field Boss
White Operator s Manual 2-105 Field Boss Operator s Manual THIS IS A MANUAL PRODUCED BY JENSALES INC. WITHOUT THE AUTHORIZATION OF WHITE OR IT S SUCCESSORS. WHITE AND IT S SUCCESSORS ARE NOT RESPONSIBLE
More informationMAINTENANCE SXV / RXV
MAINTENANCE SXV / RXV 450-550 3.1.12. HANDLEBAR AND CONTROLS Screw securing clutch control to handlebar M6 10 Throttle control screw M6 4 Ignition switch screw M8 24 FOOTRESTS Footrest support bracket
More information3208 Diesel Truck Engine Serial Number 40S1 & Up
Caterpillar Service Manual 3208 Diesel Truck Engine Serial Number 40S1 & Up Service Manual THIS IS A MANUAL PRODUCED BY JENSALES INC. WITHOUT THE AUTHORIZATION OF CATERPILLAR OR IT S SUCCESSORS. CATERPILLAR
More information4 Bore 4 Cylinder Engine For D311 Engine Set D2 Crawler S/n 4U & 5U #122 Motor Grader
Caterpillar Service Manual 4 Bore 4 Cylinder Engine For D311 Engine Set D2 Crawler S/n 4U & 5U #122 Motor Grader Service Manual THIS IS A MANUAL PRODUCED BY JENSALES INC. WITHOUT THE AUTHORIZATION OF CATERPILLAR
More information3400, 3500, 3550, 4400, 4500, 5500, & 5550 Volume 1 of 5
Ford Service Manual 3400, 3500, 3550, 4400, 4500, 5500, & 5550 Volume 1 of 5 Service Manual THIS IS A MANUAL PRODUCED BY JENSALES INC. WITHOUT THE AUTHORIZATION OF FORD OR IT S SUCCESSORS. FORD AND IT
More informationEngine Removal/Installation
Engine Removal/Installation Make sure jacks and safety stands are placed properly and hoist brackets are attached to correct positions on the engine. (See Section 1). Apply parking brake and block rear
More informationFRONT RACK, BODY PANEL, AND HEADLIGHT ASSEMBLIES
FRONT RACK, BODY PANEL, AND HEADLIGHT ASSEMBLIES 0747-506 1 2506-107 1 Rack, Front - Assembly (inc. 2) 2 0411-576 1 Decal, Warning - Load 3 0441-592 4 Bushing 4 8410-835 4 Screw, Cap 5 0423-669 4 Spacer
More information710, 712S, 712H, 716, 716H & 718H
Allis Chalmers Parts Manual 710, 712S, 712H, 716, 716H & 718H Parts Manual THIS IS A MANUAL PRODUCED BY JENSALES INC. WITHOUT THE AUTHORIZATION OF ALLIS CHALMERS OR IT S SUCCESSORS. ALLIS CHALMERS AND
More information