|
|
|
- Lilian Smith
- 5 years ago
- Views:
Transcription
1 How do you protect by fuse the power supply of the Power Output Module (POM)? SIPLUS HCS4200 / SIPLUS HCS Siemens Industry Online Support
2 This entry is from the Siemens Industry Online Support. The general terms of use ( apply. Security Information Siemens provides products and solutions with industrial security functions that support the secure operation of plants, systems, machines and networks. In order to protect plants, systems, machines and networks against cyber threats, it is necessary to implement and continuously maintain a holistic, stateoftheart industrial security concept. Siemens products and solutions only form one element of such a concept. The customer is responsible to prevent unauthorized access to its plants, systems, machines and networks. Systems, machines and components should only be connected to the enterprise network or the internet if and to the extent necessary and with appropriate security measures (e.g. use of firewalls and network segmentation) in place. Additionally, Siemens guidance on appropriate security measures should be taken into account. For more information about industrial security, please visit Siemens products and solutions undergo continuous development to make them more secure. Siemens strongly recommends to apply product updates as soon as available and to always use the latest product versions. Use of product versions that are no longer supported, and failure to apply latest updates may increase the customer s exposure to cyber threats. To stay informed about product updates, subscribe to the Siemens Industrial Security RSS Feed under Contents 1 How do you protect by fuse the power supply of the Power Output Module (POM) of the SIPLUS HCS4x00 heating control system? SIPLUS HCS POM4220 Lowend POM4220 Midrange POM4320 Busbar Mounting (IEC) POM4320 Busbar Mounting (UL) POM4320 Backplane Mounting (IEC) POM4320 Backplane Mounting (UL)... 9 Entry ID: , V 1.0, 12/2017 2
3 1 How do you protect by fuse the power supply of the Power Output Module (POM) of the SIPLUS HCS4x00 heating control system? 1 How do you protect by fuse the power supply of the Power Output Module (POM) of the SIPLUS HCS4x00 heating control system? The protection by fuse is based on the configured maximum continuous load and the selected wire cross section. Possible fuse solutions are given in the following table. If necessary, you can change the nominal values. NOTE In the case of Class J fuses, the permissible continuous current is 0.75 x In or 0.8 x In, depending on the manufacturer. Entry ID: , V 1.0, 12/2017 3
4 2 SIPLUS HCS SIPLUS HCS POM4220 Lowend Maximum crosssectional area of with IEC (230/277V) with UL508 (277/480V) Examples of Class J fuses *) POM4220 Lowend 6BK19422AA000AA0 35 A 50 ka Must be on the input side 6 mm² Protect supply conductors according to cross section NEOZED GR. D02, GL/GG, 400V, 35A NH GR.000, GL/GG, 400V, 35A, with combi indicator NH GR.000, GL/GG, 500V, 35A, with combi indicator NH GR.000, GL/GG, 500V, 35A, with front indicator Circuit breaker, 230V/400V, 40A, 1pin, 15kA, C Circuit breaker, 230V/400V, 40A, 2pin, 15kA, C Power breaker BGR. S2, Class 10, 690V, 40A, 3pin 50kA Power breaker BGR. S3, Class 10, 690V, 40A, 3pin, 50kA Power breaker BGR. S2, Class 10, 690V, 40A, 3pin 50kA Protection with Class J fuse, maximum 35A according to supply cable cross section Bussmann Littelfuse Ferraz Shawmut Only fuses are permitted. Only fuses are permitted. 5SE2335 3NA NA7814 3NA3814 5SY SY RV10314GA10 3RV10414FA10 3RV14314FA10 LPJ35SP JTD35 AJT35 Entry ID: , V 1.0, 12/2017 4
5 2 SIPLUS HCS POM4220 Midrange Maximum crosssectional area of with IEC (230/277V) with UL508 (277/480V) Examples of Class J fuses *) POM4220 Midrange / POM4220 Midrange Phase Control 6BK19422CA000AA0 / 6BK19422CA000AA1 50 A 50 ka / 100 ka Must be on the input side 16 mm² Protect supply conductors according to cross section NEOZED GR. D02, GL/GG, 400V, 50A NH GR.000, GL/GG, 400V, 50A, with combi indicator NH GR.000, GL/GG, 500V, 50A, with combi indicator NH GR.000, GL/GG, 500V, 50A, with front indicator Circuit breaker, 230V/400V, 50A, 1pin, 15kA, C Circuit breaker, 230V/400V, 50A, 2pin, 15kA, C Power breaker BGR. S2,690V, 50A, 3pin, 50kA Power breaker BGR. S3, 690V, 50A, 3pin, 50kA 5SE2350 3NA NA7820 3NA3820 5SY SY RV10314HA10 3RV10414HA10 Protection corresponding to "" according to supply cable cross section Bussmann Littelfuse Ferraz Shawmut Circuit breaker, 277V, 40A, 1pin, 10kA Circuit breaker, 240V, 50A, 1pin, 10kA Circuit breaker, 480V, 60A, 3pin, 50kA Circuit breaker, 480V, 60A, 3pin, 65kA Not available from Siemens LPJ70SP JTD70 AJT70 5SJ41407HG42 5SJ41507HG41 3VL11061KM300AA0 3RV17425LD10 Entry ID: , V 1.0, 12/2017 5
6 3.1 POM4320 Busbar Mounting (IEC) Maximum crosssectional area of with IEC (400V/480V) with UL508 (277/480V) POM4320 Busbar Mounting (IEC) 6BK19432AA000AA0 / 6BK19432AA000AA2 83 A In the device No UL approval Examples of Class J fuses *) Entry ID: , V 1.0, 12/2017 6
7 3.2 POM4320 Busbar Mounting (UL) Maximum crosssectional area of with IEC (400V/480V) POM4320 Busbar Mounting (UL) 6BK19432BA000AA0 / 6BK19432BA000AA2 80 A 50 ka / 100 ka In the device with UL508 (277/480V) Examples of Class J fuses *) Entry ID: , V 1.0, 12/2017 7
8 3.3 POM4320 Backplane Mounting (IEC) Maximum crosssectional area of with IEC (400V/480V) with UL508 (277/480V) POM4320 Backplane Mounting (IEC) 6BK19432CA000AA0 / 6BK19432CA000AA2 83 A In the device 50 mm² Protect supply conductors according to cross section NEOZED GR.D03, GL/GG, 400V, 100A NH GR.000, GL/GG, 400V, 100A, with combi indicator NH GR.000, GL/GG, 500V, 100A, with combi indicator NH GR.000, GL/GG, 500V, 100A, with front indicator Circuit breaker, 400V, 100A, 3pin, 10kA, C Circuit breaker, 3VA1, 415V, 100A, 3pin, 16kA B Power breaker BGR. S3, Class 10, 690V, 100A, 3pin, 50kA Power breaker BGR. S3, Class 10, 690V, 100A, 3pin, 100kA No UL approval Examples of Class J fuses *) 5SE2300 3NA NA7830 3NA3830 5SP VA10102ED360AA0 3RV10414MA10 3RV10424MA10 Entry ID: , V 1.0, 12/2017 8
9 3.4 POM4320 Backplane Mounting (UL) Maximum crosssectional area of with IEC (400V/480V) with UL508 (277/480V) Examples of Class J fuses *) POM4320 Backplane Mounting (UL) 6BK19432DA000AA0 / 6BK19432DA000AA2 80 A 50 ka / 100 ka In the device 50 mm² Protect supply conductors according to cross section NEOZED GR D03, 400V, 80A NH GR.000, 400V, 80A, with combi indicator NH GR.000, 500V, 80A, with combi indicator NH GR.000, 500V, 80A, with front indicator Circuit breaker, 400V, 80A, 3pin, 10kA, C Circuit breaker, 3VA1, 415V, 80A, 3pin, 16kA B Power breaker BGR. S3, Class 10, 690V, 100A, 3pin, 50kA Power breaker BGR. S3, Class 10, 690V, 100A, 3pin, 100kA Protection with UL listed fuse according to supply cable cross section Bussmann Littelfuse Ferraz Shawmut Circuit breaker, 480V/277V, 40A, 3pin, 10kA Circuit breaker, 480V, 80A, 3pin, 50kA Circuit breaker, 480V, 70A, 3pin, 65kA Not available from Siemens 5SE2280 3NA NA7824 3NA3824 5SP VA10802ED360AA0 3RV10414MA10 3RV10424MA10 LPJ100SP JTD100 AJT100 5SJ43407HG42 3VL11081KM300AA0 3RV17425QD10 Entry ID: , V 1.0, 12/2017 9
Selection and Installation of Vibration Sensors
FAQ 09/2016 Selection and Installation of Vibration Sensors SIPLUS CMS2000, SIPLUS CMS1200 SM1281 https://support.industry.siemens.com/cs/ww/en/view/109740202 This entry is from the Siemens Industry Online
Connection of F-DQ to F-DI of SINAMICS
FAQ 01/2017 Connection of F-DQ to F-DI of SINAMICS SINAMICS S120; SIMOTION D https://support.industry.siemens.com/cs/ww/en/view/39700013 This entry is from the Siemens Industry Online Support. The general
BETA Low-Voltage Circuit Protection
BETA Low-Voltage Circuit Protection /2 Introduction Miniature Circuit Breakers /4 5SP and 5SY miniature circuit breakers / 5SJ6...-.KS miniature circuit breakers with plug-in terminal /21 5SY6 0 miniature
BETA Fuses and Fuse Systems
Introduction Overview Application LV HRC fuses are used for installation systems in non-residential, commercial and industrial buildings as well as in the switchboards of power supply companies. Fuses
General technical data: CONTACTOR, AC-3, 5.5KW/400V, 1NC, AC110V 50HZ, 120V 60HZ 3-POLE, SZ S00 SCREW TERMINAL. product brand name
Data sheet CONTACTOR, AC-3, 5.5KW/400V, 1NC, AC110V 50HZ, 120V 60HZ 3-POLE, SZ S00 SCREW TERMINAL product brand name Product designation SIRIUS 3RT2 contactor General technical data: Size of contactor
General technical data: CONTACTOR, AC-3, 18.5KW/400V, 1NO+1NC, DC 24V, 3-POLE, SZ S0 SCREW TERMINAL. product brand name
Data sheet CONTACTOR, AC-3, 18.5KW/400V, 1NO+1NC, DC 24V, 3-POLE, SZ S0 SCREW TERMINAL product brand name Product designation SIRIUS 3RT2 contactor General technical data: Size of contactor S0 Product
Emotron FDU and VFX 2.0
Emotron FDU and VFX 2.0 AC drives with protection class IP20 and IP21 7.5-132 kw Addendum to instruction manual English Software version 4.3X Addendum valid for Emotron FDU and Emotron VFX AC drives This
MM: Bild angeben Content 690 V AC for baseplate, busbar and supporting rail mounting 60 Accessories 62 Technical Data see page 65 NU System The EFEN s
Basic Efficiency up to 1500 V 1-pole 3-pole SILAS MM: Bild angeben Content 690 V AC for baseplate, busbar and supporting rail mounting 60 Accessories 62 Technical Data see page 65 NU System The EFEN successfully
General technical data: CONTACTOR, AC-3, 4KW/400V, 2NO+2NC, DC 24V, 3-POLE, SZ S0 SCREW TERMINAL REMOVABLE AUX. SWITCH. product brand name
Data sheet CONTACTOR, AC-3, 4KW/400V, 2NO+2NC, DC 24V, 3-POLE, SZ S0 SCREW TERMINAL REMOVABLE AUX. SWITCH product brand name Product designation SIRIUS 3RT2 contactor General technical data: Size of contactor
30Compact 200 A / 360 A
200 A / 360 A 2 BUSBAR SYSTEM TECHNOLOGY 200 A / 360 A 2 Compact busbar system for control systems and power distribution up to 360 A The busbar system is the ideal solution for distribution boards with
General technical data: CONTACTOR, AC-3, 11KW/400V, 1NO+1NC, AC110V 50HZ, 120V 60HZ 3-POLE, SZ S0 SCREW TERMINAL. product brand name
Data sheet CONTACTOR, AC-3, 11KW/400V, 1NO+1NC, AC110V 50HZ, 120V 60HZ 3-POLE, SZ S0 SCREW TERMINAL product brand name Product designation SIRIUS 3RT2 contactor General technical data: Size of contactor
D509E. Manual Motor - Starters
D509E Manual Motor - Starters Index Page Manual Motors Starters 182 Auxilliary Contact Blocks 182 Trip Alarm Aux. Switch 182 Shunt Release 182 Under-voltage Release 183 Accessories 183 Busbar Connectors
3RT14 Contactors with 3 Main Contacts
3RT14 Contactors with 3 Main Contacts for Switching Resistive Loads Contactor Size 3RT14 46 Mechanical endurance Oper. 10 million Electrical endurance Oper. 0.5 million C-1 utilization category at I e
BETA Switching Switches and Light Indicators
Siemens AG 2008 BETA Switching /2 Product overview /3 5TE8 control switches / 5TE4 pushbuttons /2 5TE5 light indicators /5 5TE8 ON/OFF switches /22 5TE9 busbars /24 5TE switch disconnectors Siemens ET
IEC Low Voltage Products Module 4
IEC Low Voltage Products Module 4 IEC Low Voltage Products NH DIN o All variations o Features benefits o Dual indication IEC Cylindrical Fuse System o Wide range of sizes and ratings o CCP NEW Product!
CrossBoard TECHNOLOGY. CrossBoard
CrossBoard 125 A 1 CrossBoard TECHNOLOGY CrossBoard CrossBoard 125 A 1 CrossBoard the new basic system Tool-free mounting combined with high safety due to the integrated touch-safe protection make CrossBoard
SINAMICS S120 drive system
s in booksize format Overview Design (continued) The scope of supply of the s includes: DRIVE-CLiQ cable for connection to the Control Unit for drive control on the immediate left DRIVE-CLiQ cable (length
Power distribution. RiLine fuse elements. NH fuse-switch disconnectors, size 000. For mounting plate assembly
NH fuse-switch disconnectors, size 000 Version -pole, cable outlet at the top/bottom For the use of fuse inserts to EN 60 - Technical specifications to IEC/EN 60 947-, see chapter -5, page 6 see chapter
WARNING Personnel and property must be protected against the consequence of component break-down internally in the frequency converter.
1 Fuses and Circuit Breakers 1.1.1 Fuses A frequency converter that works correctly limits the current it can draw from the supply. Still, it is recommended to use fuses and/ or Circuit Breakers on the
LOW VOLTAGE FUSES EUROPEAN NH KNIFE-BLADE FUSE SYSTEM
NH SIBA NH Fuse-links with top and center indicator are available in a large variety of voltage ratings, body sizes and operating classes: Sizes: 000, 00, 0, 1, 2, 3 and 4 Voltage ratings: AC 400 / 500
D & D0 LOW VOLTAGE FUSE SYSTEM
elay (Class gl/gg) and UltraRapid (gr) characteristics rated at 00Vac. Similar to the D0 system the D system is designed to IEC9 and VDE0. DType Fuse Links Selection Table DI Fuse Links fuse base E D DR
Motor Circuit Breakers C4
Motor protection rating up to 100 Amps Short circuit breaking capacity up to 100kA Phase failure protection DIN rail mounting Wide range of accessories Options and ordering codes Model C4/32T Setting Short
Switch Disconnectors. SENTRON 3NP5 Fuse Switch Disconnectors up to 630 A. Introduction. 7/106 Siemens LV
Switch Disconnectors Introduction Siemens AG 2010 Overview 3NP5 0 3NP5 2 3NP5 fuse disconnector range 3NP5 4 SENTRON 3NP5 fuse disconnectors are controls for the occasional manual ing/isolating of loads
8WH2 Spring-Loaded Terminals
8WH2 Spring-Loaded Terminals /2 Introduction /3 General data on 8WH /7 8WH through-type terminals 1) /18 8WH hybrid through-type terminals 1) /21 8WH fuse terminals /23 8WH isolating blade terminals /25
Page. Circuit-Breakers M4 2 for motor protection. Auxiliary contacts 3 Signalling switch Auxiliary releases
Circuit Breakers M4 Page Circuit-Breakers M4 2 for motor protection Auxiliary contacts 3 Signalling switch Auxiliary releases Insulated 3-pole busbar system 4 Terminal block DIN-rail adapters 5 Busbar
INNOZED D0 fuse-bases with touch protection
INNOZED D0 fusebases with touch protection INNOZED D0 fusebases with touch protection FUSE HOLDERS, FUSE BASES AND SUPPORTS IEC D0 & D FUSE BASES FEATURES & BENEFITS INNOZED is a fuse base for D0 fuselinks,
8WH2 Spring-Loaded Terminals
8WH2 Spring-Loaded Terminals /2 Introduction /3 General data on 8WH /7 8WH through-type terminals 1) /18 8WH hybrid through-type terminals 1) /21 8WH fuse terminals /23 8WH isolating blade terminals /25
NH-Fuse system Low voltage
38103-FER NH-fuses A4-engl 22.10.2003 15:50 Uhr Seite 3 NH-Fuse system Low voltage 38103-FER NH-fuses A4-engl 22.10.2003 14:01 Uhr Seite 2 Utilization NH-fuses gg am gtr NH-fuses Utilization Categories
Index. Manual Motor Starters 1. Auxiliary Contact Blocks 1. Trip Alarm Auxiliary 1. Switch. Shunt Release 1. Under-voltage Release 2.
Index Index Page Manual Motor Starters 1 Auxiliary Contact Blocks 1 Trip Alarm Auxiliary 1 Switch Shunt Release 1 Under-voltage Release 2 Accessories 2 Busbar Connectors 2 Enclosures 2 Leistung, kw C mv
1 Phase electronic contactor (SC 1)
1 Phase electronic contactor (SC 1) - Rated operational voltage up to 600VAC 50/60 Hz - Rated operational current up to 15/30A/50/63A AC-1 - Control voltage from or - Compact modular design 22.5, 45, or
gi-gl-gg, am gi-gl-gg gi-gl-gg NH DIMENSION KNIFE-BLADE FUSE-LINKS EURO/IEC Fuses & Accessories
,, FUSE BASES, AND ACCESSORIES Ferraz Shawmut NH Fuse-links, sizes 00, 0, 1, 2, 3 and 4 are rated 500 or 690 Volts AC with breaking capacities of 80kA or 120kA. All fuse-links include an indicator or striker
CRITO Connection technology. Double and triple T and TCC section busbars
Centre feed unit 5 Centre feed unit Centre feed unit 5 Centre feed unit up to 4000 A combines the advantages of high short-circuit capacity, drill-free mounting, brace terminal technology and clearly structured
Fuses for Semiconductor Protection - European Standard. Class: Voltage ratings: Current ratings: Standards: Approvals: Features and Benefits
Fuses for Semiconductor Protection - European Standard Class: ar Voltage ratings: 660V AC to 1000V AC Current ratings: 16 A to 400 A Standards: UL 248-13 IEC 60269-1 & 4 DIN VDE 0636-40 DIN 43653 Approvals:
LINOCUR Size D02 63A 230VAC/440VAC
IEC FUSE SWITCH DISCONNECTORS D0 FUSE COMBINATION UNITS The D0 Linocur is a combination of switch disconnector fuse and Neozed 63A fuse-link, equiped with significant safety characeristics and sophisticated
MANUAL 2018 AL 2018 U AN M
MANUAL 2018 DEVELOPED IN RÖDENTAL, SUCCESSFUL WORLDWIDE Wöhner develops system solutions for the electro-technical market. For over 88 years, the Wöhner name has been synonymous with impressive technical
3NP1 Fuse Switch Disconnectors up to 630 A
Switch Disconnectors 3NP1 Fuse Switch Disconnectors up to 630 A Introduction Overview All key product features at a glance available for all sizes Connection of circular conductors and laminated conductors
Bulletin A 1497B 1497D Type Control Circuit Transformer Machine Tool Transformer Control Power Transformer General Purpose Transformer
Bulletin, A, B, D Transformers Product Overview Transformers Bulletin A B D Type Control Circuit Transformer Machine Tool Transformer Control Power Transformer General Purpose Transformer Features Single,
e n e r g i a HULANICKI BEDNAREK sp. z o.o. HABeR-M Switchgear system rated up to 1600A 1
e n e r g i a HULANICKI BEDNAREK sp. z o.o. Switchgear system rated up to 1600A www.haberenergia.pl 1 Switchgear system rated up to 1600 A Low voltage switchgear system utilising moulded-case circuit-breakers
Semiconductor Fuses European Fuses
66 grb 66 V AC grb - from up to 3 A Size: x38 The fuse preselection table below indicates: Fuse preselection - rated current (or ) I N - pre-arcing I²t (I²t p ) at ms - total ope I²t (I²tt) at 66 V, cos
onlinecomponents.com
66 grb 66 V AC grb - from up to 3 A Size: x38 The fuse preselection table below indicates: Fuse preselection Rated current Pre-arcing I²t Total I²t at 66VAC I N (A) I²t p (A²s) I²t (A²s) - rated current
Special Purpose Fuses
Special Purpose Fuses Fuses for DC voltage applications www.eti.si ETI Elektroelement d.d. Obrezija 5, SI - 111 Izlake Slovenija Tel. + 38 03 5 57 570 Faks + 38 03 5 7 077 eti@eti.si NH DC 80 V - Telecom
NH DIN Dual Indication Fuse Links
Class of Operation gl/gg, 500V AC, 10 to 630 s Sizes 000 to 3 Standards/ Approvals: Description: Packaging: IEC 60269, VDE0636, DIN 43 620 1 to 4. A square bodied range of industrial fuse links for a wide
G eneral Purpose Fuses
G eneral Purpose Fuses North American Power Fuses AMP-TRAP2000 AMP-TRAP2000 AJT Class J - Time Delay 1 to 600A - - Motor, motor controller, control transformer, and circuit back-up protection. Space saving
Siemens AG SITOP power supply SITOP DC UPS. Solutions for buffering 24 V in the automation. Edition 11/2017. Brochure. siemens.
power supply DC UPS Solutions for buffering 24 V in the automation Brochure Edition 11/2017 siemens.com/sitop-ups Solutions for bridging power fluctuations and power failures SOLUTIONS Uninterruptible
NH Dual NHIndicator Fuse System Fuse System
NH Dual NHIndicator Fuse System Fuse System Product Product Guide Guide NH Dual Indicator System Catalogue NH Dual Indicator Fuse System Class gg/gl - 400Vac - 2 to 60 Amps - s 000 to Part Numbers 400Vac
gg, am NH DIMENSION KNIFE-BLADE FUSE-LINKS EURO/IEC Fuses & Accessories NH DIMENSION KNIFE-BLADE FUSE-LINKS, FUSE BASES, AND ACCESSORIES
, am, FUSE BASES, AND ACCESSORIES Ferraz Shawmut NH Fuse-links, sizes 000, 00, 0, 1, 2, 3, 4 and 4a are rated 500 or 690 Volts AC with breaking capacities of 80kA or 120kA. All fuse-links include an indicator
1. The term "withstand" means "the unit will remain in place without separation of any parts from the device when subjected to the seismic forces.
SECTION 262816 - ENCLOSED SWITCHES AND CIRCUIT BREAKERS PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Fusible switches. 2. Nonfusible switches. 3. Receptacle switches. 4. Shunt trip switches. 5.
Circuit-Breakers M4 166 for motor protection. Auxiliary contacts 167 Signalling switch Auxiliary releases
Index Page Circuit-Breakers M4 166 for motor protection Auxiliary contacts 167 Signalling switch Auxiliary releases Insulated 3-pole busbar system 168 Terminal block DIN-rail adapters 169 Busbar adapters
Rittal RiLine60. The fascinating 60 mm system of the future assembly-friendly, time-saving, individual and modular. including.
Rittal RiLine60 including innovations 2007 The fascinating 60 system of the future assembly-friendly, time-saving, individual and modular R Rittal RiLine60 perfection in a 60 system Time-saving assembly,
8WH6 ipo Plug-In Terminals
/ Introduction /3 /4 8WH6 through-type terminals /8 8WH6 fuse terminals /9 8WH6 isolating blade terminals /11 8WH6 isolating terminals /13 8WH6 two-tier terminals More technical product information: Service&Support
Transformer Short Circuit Current Calculation And Solutions
Transformer Short Circuit Current Calculation And Solutions We have made it easy for you to find a PDF Ebooks without any digging. And by having access to our ebooks online or by storing it on your computer,
Protection Equipment. Overload Relays. Reference Manual 04/2011. Industrial Controls. Answers for industry.
Protection Equipment Overload Relays Reference Manual 04/2011 Industrial Controls Answers for industry. Protection Equipment 2 3 7 7 8 9 14 1 16 17 18 18 19 20 2 26 27 28 29 30 32 37 38 40 42 Introduction
COMBINATION CIRCUIT BREAKERS RCBO
COMBINATION CIRCUIT BREAKERS RCBO W COMBINED MCB AND RCCB, SERIES BOLF W CONTACT POSITION INDICATOR 108 TYPE EAN CODE FOR QUICK ORDERING TRIP INDICATOR WHITE/BLUE CONTACT POSITION INDICATOR RED/GREEN W
Power distribution components
Industrial electronics Power distribution components Reliable, cost-effective, complete R England sv_001.fm Rittal power distribution components Bar centre distance (mm) Number of poles Busbar dimensions
DIN Dual indication fuse links
Supersedes November 2015 BUSSMANN SERIES Product description Eaton s Bussmann series DIN 43620 dual indicator fuse links protect UPS, soft starters, solid state relays, variable speed drives, rectifiers
Control Circuit Protection
Contents 5SJ4 Branch Circuit Protectors 5SY4 Supplementary Protectors 5SY6 Supplementary Protectors 16/19 5SJ4 Page Selection and ordering data 1-pole up to 63A 16/4 1-pole, 2-pole, 16/5 3-pole, 240VAC
SITOR semiconductor fuses, connected in parallel
SITOR semiconductor fuses, connected in parallel SENTRON siemens.com/lowvoltage Parallel connection of SITOR fuses Product training Parallel and series connection of fuses UL requirements for the parallel
Approved Standards. Ordering Information. Thermal Overload Relay J7TKN. Model Number Legend. Thermal Overload Relay. Accessories
Thermal Overload Relay J7TKN ) Thermal Overload Relay Direct and separate mounting Single phasing sensivity according to IEC 60947-4-1 Finger proof (BGV A2) Accessories Set for single mounting Approved
27Overload Relays. Overview Combinations of overload relays and contactors SIRIUS 3R. Thermally delayed overload relays CLASS 10
27Overload Relays Overview Combinations of overload relays and contactors SIRIUS 3R 27Overload Relays Contactors Current range A 3RT10 1 Size S00 3/4/5.5 kw 3RT10 2 Size S0 5.5/7.5/11 kw 3RT10 3 Size S2
Short Circuit. Sizes 0, 1, 2, and 690 Volt ratings - 32A through 630A All ratings include striker. 0% Lead
, am nh dimension knife-blade fuse-links, fuse bases, and accessories Ferraz Shawmut NH Fuse-links, sizes 000, 00, 0, 1, 2, 3, 4 and 4a are rated 500 or 690 Volts AC with breaking capacities of 80kA or
Industrial Control Transformers
6 Industrial Control Transformers Section 6 Industrial Control Transformers provide a low and safe control voltage for the operation of electromagnetic devices, such as motor starters, contactors, solenoids
Order No. of the options EMC filter Class A
Ordering Data for Variant Dependent Options The options listed here (filters, chokes, brake resistors, gland plates, fuses and circuit breakers) are inverter specific. The inverter and the associated options
Bussmann series NH catalogue. Leadership in circuit protection
Bussmann series NH catalogue Leadership in circuit protection Energizing a world that demands more. We deliver: Electrical solutions that use less energy, improve power reliability and make the places
SINAMICS S120. Power units, booksize format Dimensioning the protective conductor. Product information 07/2016 A5E B AA
SINAMICS S120 Power units, booksize format Dimensioning the protective conductor Product information 07/2016 A5E38707698B AA 1 Table of contents Table of contents 1 General information... 3 2 Installation
Terminal Blocks Product Catalog Terminal Block Supplement. Introduction. 8WH6 ipo Plug-In Terminals. 8WH6 ipo Installation Terminals
Terminal Blocks 2013 Product Catalog Terminal Block Supplement Introduction 8WH6 ipo Plug-In Terminals 8WH6 ipo Installation Terminals 8WH2 Spring-Loaded Terminals 1 2 3 4 8WH 8WH5 Combination Plug-In
Basic function. Rated current. Appropriate for three-phase motors of output 2) [kw] I n. = 400 V a.c. 2) Appropriate for three-phase motors
![Basic function. Rated current. Appropriate for three-phase motors of output 2) [kw] I n. = 400 V a.c. 2) Appropriate for three-phase motors](/thumbs/74/70162763.jpg "Basic function. Rated current. Appropriate for three-phase motors of output 2) [kw] I n. = 400 V a.c. 2) Appropriate for three-phase motors")
MOTOR STARTERS SM Basic function Switching and protection of motors up to A Protection against short-circuit and protection against overload The device responds to phase failure The device is provided
Modulostar. Motor Branch 400V AC - 690V AC up to 11 kw
Modulostar Motor Branch 400V AC - 690V AC up to 11 kw Innovations in MODULOSTAR to control energy in motor starters Already active in the field of motor starters with rated current over 32A per phase,
The Complete Range. Drawing of the NH Fuse-Switch, 3-pole switching, horizontal design for busbar supply on a 60 mm busbar systems
The Complete Range Easy mounting onto supporting rails Protection against accidental contact in the standart version Perforated versions for connections Drawing of the NH Fuse-Switch, 3-pole switching,
IEC Low Voltage General Purpose Protection
, 6A, 0/400VAC (/440VAC) Complying with DIN VDE 0660 Part 07 EN / IEC 60947- DIN VDE 066 Part IEC 6069- DIN VDE 068 DIN VDE 4880 The D0-LINOCUR is a combination of switch-disconnector-fuse and NEOZED 6
Receptacles & Wall Boxes with Integral Circuit Protection
product description New Product Announcement Issue date: 25 January 2012 Receptacles & Wall Boxes with Integral Circuit Protection Meltric s receptacle/wall box combinations with integral circuit protection
185mm-System power 2500A. Expertise
185mm-System power 2500A Expertise System advantages The 185mm-System power is designed for use in efficient power distribution assemblies with a high short-circuit withstand capacity. The narrow design
MINIATURE CIRCUIT BREAKERS RCBO s & DIN RAIL MOUNTED FUSE HOLDERS
MINIATURE CIRCUIT BREAKERS RCBO s & DIN RAIL MOUNTED FUSE HOLDERS MANUFACTURED IN THE EU EUROPEAN QUALITY 1, 2 & 3 POLE MCB s TRIPPING CURVES C & D CURRENT RATINGS 1AMP TO 63AMPS 10KA BREAKING CAPACITY
PANEL-MOUNTING COMPONENTS FUSE HOLDERS. Quality
PANEL-MOUNTING COMPONENTS FUSE HOLDERS Quality For conventional wiring, Wöhner offers a comprehensive range of panel components for fastening to a DIN rail or mounting plate. The fuses and associated
Motor Circuit Breakers C3
Motor Circuit Breakers C3 Motor protection rating up to 100 Amps Short circuit breaking capacity up to 100kA Phase failure protection DIN rail mounting Wide range of accessories Options and ordering codes
Circuit-Breaker Design
8PT2751 CircuitBreaker Design Contents Page ACB Circuitbreaker design with 3W. Incoming feeder, couplers and outgoing feeder cubicles 4/2 General 4/2 Structure and Functions 4/2 Auxiliary Compartment 4/2
Manual. Industrial Controls. Protection Devices. SIRIUS 3RV Motor Starter Protectors. Edition 12/2017. siemens.com
Manual Industrial Controls Protection Devices Edition 12/2017 siemens.com Introduction 1 Standards 2 Industrial Controls Protection devices SIRIUS 3RV Motor Starter Protectors Manual Product description
TA Ta VA CTRL-XFRMR
3804 South Street 7964-7263, TX Nacogdoches Phone: 936-69-7941 Fax: 936-60-468 TA2437 Ta-2-437 10VA CTRL-XFRMR Acme Electric Catalog Number TA2437 Manufacturer Acme Electric Description Control Transformer,
Molded-Plastic Distribution Systems
Molded-Plastic Distribution Systems / Introduction ALPHA 8HP molded-plastic distribution systems /8 Empty enclosures / Modular installation devices /4 DIAZED/NEOZED fuse systems /7 NP fuse switch disconnectors
In-line Plug-in Design 3NJ6
Contents Page - Outgoing Feeders General 6/2 Structure and Functions inclusive Forms of Internal Separation, Installation of Instruments 6/2 Plug-on Bus System 6/2 Cable Connection Compartment 6/2 Switch-disconnector-fuse
2.1 Warnings & Agency Approvals Electrical Connections - Specifications Standard Wiring Configurations...2 4
CHAPTER ELECTRICAL 2 INSTALLATION Contents of this Chapter... 2.1 Warnings & Agency Approvals..................2 2 2.1.1 Isolation..............................................2 2 2.1.2 Electrical Power
3/2 Introduction. Unequipped Distribution Boards (Flat Pack) 3/6 8GK1 surface-mounting distribution boards
ALPHA 400 - DIN Wall-Mounted Distribution Boards /2 Introduction Unequipped Distribution Boards (Flat Pack) /6 8GK1 surface-mounting distribution boards Pre-Assembled Unequipped Distribution Boards /7
6.3 mm reverse quick connect
BUSSMANN SERIES Pre-production and sample electric vehicle auxiliary fuses 500 Vdc, 5-50 A Agency information Designed to: JASO D622 ISO 8820-8 Manufactured under a IATF 16949 quality system for compliance
LENRK/LESRK CLASS RK1 DUAL ELEMENT TIME-DELAY FUSES
LENRK/LESRK CLASS RK Catalog Number LENRK (. - 0A) 50 Volts AC or Less Catalog Number LESRK (.5-0A) 0 Volts AC or Less S LENRK 50V 0..5 75 0..5 5 0..5 9 50 5 0.5 50 0.. 70 0 0..5 5 0 50 7.5 90 0..5 0 50.
Interchangeable Built-in Fixed thermal Adjustable thermal Magnetic Fixed Adjustable Adjustable Electronic RMS 7 LS LSI
. Technical Data and Specifications Ratings Frames EG, JG and LG EG JG LG Maximum rated current (amperes) 15, 160 1 50 400, 630 Breaker type 3 B B E S S H H C E S H C U X E S H C U X of poles 1, 3, 4,
Miniaturecircuitbreaker(MCB),6A,1Np,C-Char,AC. Application Switchgear for industrial and advanced commercial applications.
Miniaturecircuitbreaker(MCB),6A,1Np,C-Char,AC Partno. FAZ-C6/1N CatalogNo. 278668 EatonCatalogNo. FAZ-C6/1N EL-Nummer 1695203 Similar to illustration Deliveryprogram Basic function Miniature circuit-breakers
Protection Equipment
Protection Equipment Price Groups 101, 102, 121, 131, 143 /2 Introduction Motor Starter Protectors/ Circuit Breakers SIRIUS 3RV2 Motor Starter Protectors up to 40 A new /7 General data /13 For motor protection
Synergy EN product information
Synergy EN60947-4-2 product information Rated operational voltages U e 200Vac to 480Vac Rated operational currents I e See Rating Table Rating index See Sizing Guide Rated frequency/frequencies 50-60Hz
SPF SERIES SOLAR FUSES
Vdc - A Specifications Voltage Rating VDC Amperage Rating,,,.,,,,, 0,,,,, Max. Interrupting Rating ka - A - A ka - A - A Time Constant ms Material Body: Melamine Caps: Copper Alloy Approvals UL - Listed
3VU13, 3VU16 Circuit-Breakers
3VU3, 3VU6 Circuit-Breakers Description The 3VU3, 3VU6 circuit-breakers are compact circuit-breakers for currents up to 80 A which operate according to the current limiting principle. The devices are used
MS /27/2015. ABB contact for United States of America. General Information Extended Product Type: Categories
Page 1 of 5 MS132-10 ABB contact for United States of America General Information Extended Product Type: Product ID: EAN: Catalog Description: Long Description: MS132-10 1SAM350000R1010 4013614400100 MS132-10
High-voltage high-breaking capacity VV fuse-links
High- high- VV fuse-links [A] (ka) [mω] [W] [A 2 s] [A 2 s] 12 580 4 6,1 57 4 A 20 370 9 17,3 164 6 A 25 260 10 36 340 10 A 46 55 7 161 1 530 16 A 60 37 13 250 2 270 20 A 80 30 15 430 3 750 25 A 105 25
NH LOW VOLTAGE a FUSE SYSTEM
NH LOW VOLTAGE a FUSE SYSTEM NH DIN Low Voltage Fuse System from Cooper Bussmann High Breaking Capacity 400Vac, 500Vac and 690Vac Insulated Tag variants available Dual Indication VDE 066 Part 1 DIN 4 60
Residual Current Protective Devices / Arc Fault Detection Devices (AFDDs)
Introduction Overview Devices Page Application Standards Used in / Personnel, material and fire protection, as well as protection against direct contact. SIGRES with active condensation protection for
Leadership in Circuit Protection
Leadership in Circuit Protection Bussmann is now a part of Eaton Learn more at Eaton.com/Cooper Leadership in Circuit Protection. The only company that can provide a complete circuit protection solution
Type Pack size Weight Part no. kg/100 units for undrilled busbars 30, 40, 50, 60 x 10. Dimensions Current Pack size Weight Part no.
1 01 628 01 617 01 79 01 25 Universal busbar support 100mm, 3-pole Type Pack size Weight Part no. for undrilled busbars 30, 0, 50, 60 x 10 7.1 01 79 06 End cover for busbar support 01 79 10 5.3 01 25 06
NH DIN Dual Indication Fuse Links Class am, 690Vac, 6 to 500 Amps, Sizes 000 to 3 NH Series
Description: A range of Class am square bodied industrial fuse links for a wide variety of motor protection applications. Packaging: MOQ: 3 Catalogue Symbol: Class of Operation: (amp)nhm(size)b-690 am
SENTRON 3NP1 Fuse Switch Disconnectors up to 630 A
Introduction Overview All key product features at a glance available for all sizes Connection of circular conductors and laminated conductors Fuse monitoring possible throughout Busbar supports can be
Bussmann series NH photovoltaic fuse links
Technical Data 72033 Supersedes April 204 Bussmann series NH photovoltaic fuse links BUSSMANN SERIES Product description Eaton s Bussmann series NH size photovoltaic fuse links are specifically designed
Customized for maximum demands. SIVACON Technology Partner. SIVACON S8 low-voltage power distribution board: safe, flexible, efficient
SIVACON Technology Partner Customized for maximum demands SIVACON S8 low-voltage power distribution board: safe, flexible, efficient siemens.com/sivacon-partner Contents Conforming to standards: systematic
Subject: SPF 25A and 30A Product Update. Date: May 1, 2017
W. Higgins Road Suite 0 Chicago, IL www. Subject: SPF A and A Product Update Document# LFPCN_PG00 Date: May, This letter is to inform Littelfuse Sales, Sales Support & our valued Customers of updates to