Shay #6 Technical Data Handbook
|
|
- Emory Black
- 5 years ago
- Views:
Transcription
1 Note: This Document was Created in Landscape Format. Please Select Landscape Mode Prior to Printing. Shay #6 Technical Data Handbook Western Maryland Shay #6 Contents: Original Order Specifications Summary of Costs Master Drawing Index Compiled by: Richard C. Meyer First Edition: January 2001 Shay #6 Technical Data Handbook Page 1 of 55
2 List of Contributors: Allen County Historical Society 620 West Market Street Summary of Costs Lima, Ohio Original Order Specifications California State Railroad Museum Library 111 "I" Street Sacramento, California Locogear 9 River Oaks Drive Chico, California Richard C. Meyer 2116 Gent Drive Plano, Texas Master Drawing Index Web Space Provider Document Author This Document may be reproduced and distributed in its original configuration only. No fees, other than normal reproduction costs, may be charged. Shay #6 Technical Data Handbook Page 2 of 55
3 Table of Contents - All Lima Drawings Start with the Following 2 Digits (10-99) 01 - Construction Order and Specifications 36 - Dome - Cap, Casing, and Ring 68 - Reverse Lever, Screw and Pneumatic 02 - Material Costs - Estimate vrs Actual 37 - Draw Gear, Engine, Coupler, Rigging 69 - Reverse Shaft and Reach Rod 03 - Labor Costs - Estimate vrs Actual Rocker and Box 04 - Summary of Costs - Estimate vrs Actual 39 - Eccentrics, Cranks, Straps and Rods 71 - Running Boards and Brackets Rods - Connecting and Stubs 09 - Manufacturing Notes Sand Box, Sanders and Rigging 10 - Ash Pan and Oil Pan 42 - Erecting Cards - Elevations 74 - Shafts, Crank, Line, Square, Gears 11 - Axles 43 - Erecting Cards - Cross Sections 75 - Smoke Box Arrangement, Front & Door 12 - Bell and Ringer 44 - Exhaust Pipe and Nozzles 76 - Springs 13 - Boilers 45 - Fire Door, Fire Brick and Tubes Boiler Details and Attachments Steam Gauge, Safety Valve and Turrets 15 - Bolts, Nuts, Studs, Pins and Bushings Steam Pipes and Tee Heads Frames and Details 80 - Stoker and Details, Engine and Tender Gauges, Templates and Jigs 81 - Superheater, Header and Details 18 - Brackets, Air and Steam Gauge, Cylinder 50 - Guides, Yoke and End 82 - Tank Valves, Oil and Water, Hose Grate Arrangement Brake Equipment, Foundation 52 - Grate Details Bumpers and Details 53 - Hand Rail and Steps, Engine and Tender 85 - Tender Frames 22 - Cabs 54 - Headlights and Signal Attachments, Lamps Cab Details 55 - Injectors, Boiler Checks and Stariners 87 - Tender Deck, Tool Box Tender Tank, Water and Oil, Funnel Lagging and Jacket Cocks and Valves, Cylinder and Blow-Off 58 - Link Motion Cocks and Valves, Gauge, Water, Special 59 - Oil and Grease Cups, Lubricators 91 - Throttle and Dry Pipe 28 - Cock Rigging 60 - Oil Burning Attachments 92 - Tools 29 - Crank Pins and Details 61 - Painting, Lettering and Numbering 93 - Trucks and Details, Shay Engine 30 - Crossheads, Arm, Pin, Key and Shoes 62 - Pilot and Snow Plows 94 - Valves, Distribution, Stems, Rods 31 - Cylinders and Barrel Bushings 63 - Pipe Fittings and Clamps, Air, Steam 95 - Wheels and Tires 32 - Cylinder and Steam Chest Heads & Covers 64 - Piping Arrangements, Engine and Tender 96 - Whistle and Rigging Piston and Rod, Extentions, Packing 97 - Preliminary Designs and Propositions 34 - Cylinder By-Pass, Relief, Vacuum 66 - Plugs, Hand Holes and Washout 98 - Clearance and Wheel Base Diagrams 35 - Die Work - Flanging Dies Miscellaneous Original Master Index: Copied June 23, 1945; Checked June 25, 1945; B. Wilkerson; Issued June 26, 1945 Shay #6 Technical Data Handbook Page 3 of 55
4 Item Group 01 - Shay #6 - Construction Order and Specifications Description Specification Order Number 510 Shop Number 3354 Road Number 6 Specification, Number Y , Dated May 26, 1944 Specification - Class 150-3, Three Truck Shay Specification - Customer Western Maryland Railway Conditions of Operation - Gauge 4' 8 1/2" Conditions of Operation - Weight of Rail 80# and 90# Conditions of Operation - Maximum Grade 7% Conditions of Operation - Maximum Curve 22 Degrees, 30 Minues General Dimensions - Height (from top of rail) 16' 0" General Dimensions - Length (total wheel base) 49' 0" General Dimensions - Width 11' 4" General Dimensions - Water Tank Manhole 10' 9" General Dimensions - Width (Centerline to Crank) 67 1/2" General Dimensions - at Height Above Rail 25 1/2" Cylinders, Number of 3 Cylinders, Diameter 17" Cylinders, Stroke 18" Driving Wheels, Number 12 Driving Wheels, Diameter 48" Driving Wheels, Wheelbase 68" Weight, Working Order 324,000 lbs Tractive Power 59,740 lbs Factor Adhesion 5.42 Fuel, Type Soft Coal Fuel, Capacity 9 tons Water Tank, Capacity 6,000 U.S. Gallons Boiler, Diameter 62 3/8" Boiler, Pressure 200 lbs Boiler, Type Extended Wagon Top Firebox, Length 114" Firebox, Width 61 1/4" Shay #6 Technical Data Handbook Page 4 of 55
5 Group 01 - Shay #6 - Construction Order and Specifications (Continued) Item Description Specification 1.34 Tubes, Number 156 each, #12 BWG Hot Rolled Seamless Steel 1.35 Tubes, Diameter 2" 1.36 Flues, Number 26 each, #9 BWG Hot Rolled Seamless Steel 1.37 Flues, Diameter 5 3/8" 1.38 Tubes and Flues, Length 13' 6" 1.39 Heating Surface, Firebox and Arch Tubes 234 sq. ft Heating Surface, Tubes and Flues 1,623 sq. ft Heating Surface, Total 1,857 sq. ft Superheater, Surface Area 411 sq. ft Superheater, Tubes 26 each, #9 B.W.G. Seamless Steel 1.44 Grate Area 48.5 sq. ft Air Brake Westinghouse ET#6, Air 1.46 Air Pump Westinghouse 8 1/2" Cross Compund 1.47 Draft Gear Miner Friction A-22-XB 1.48 Draft Gear AAR Type "E" 1.49 Coupler Height 34 1/2" 1.50 Coupler Knucklers 11" 1.51 Gear Ratio 20 Teeth to 49 Teeth; Ratio Shay #6 Technical Data Handbook Page 5 of 55
6 Group 02 - Shay #6 Locomotive Cost - Estimate versus Actual Item Material Description Estimated Weight Actual Weight Estimated Cost Actual Costs 2.01 Fire Box Plate 5,300 5,280 $ $ Flange Plate 25,000 28,048 $ $ Tank Plate 31,700 60,651 $ $1, Structural 26,200 27,205 $ $ Forgings 51,900 53,178 $2, $2, Iron Castings 28,320 21,966 $2, $1, Brass Castings 4,810 4,726 $1, $1, Steel Castings 84,150 81,647 $10, $9, Tires 125,000 12,621 $ $ Rigid Stay Bolts 4,200 3,784 $ $ Rivets 5,100 4,884 $ $ Air Brake 0 0 $1, $1, Miscellaneous 0 0 $3, $2, Specialties 0 0 $3, $3, Plate to CMP Min. 33,000 0 $ $ Total Material Costs: $27, $27, Group 03 - Shay #6 Locomotive Labor - Estimate versus Actual Item Labor Description Estimated Cost Actual Cost Excess in Estimate Axcess in Actual 3.01 Smith Shop $1, $ $ $ Boiler Shop $2, $2, $0.00 $ Tank Shop $ $1, $0.00 $ Truck Shop $2, $ $1, $ Machine Shop #8 $0.00 $ $0.00 $ Machine Shop #9 $9.00 $ $0.00 $ Machine Shop #10 $0.00 $ $0.00 $ Eerecting Shop $ $2, $0.00 $2, Shay Machine Shop $5, $5, $0.00 $ Carpenter $ $93.00 $51.00 $ Paint Shop $ $61.00 $85.00 $ Bolt Room $0.00 $ $0.00 $ Miscellaneous #13 and #20 $0.00 $ $0.00 $ Total Labor Cost: $11, $16, $0.00 $4, Shay #6 Technical Data Handbook Page 6 of 55
7 Group 04 - Shay #6 Locomotive - Summary of Costs Item Item Description Estimated Cost Actual Cost Excess in Estimate Excess in Actual 4.01 Material $27, $27, $ $ Labor $11, $16, $0.00 $4, Burden - Factory $22, $31, $0.00 $9, Burden - Admin. and General (50%) $5, $8, $0.00 $2, Total Burden $28, $40, $0.00 $12, Other Direct Charges 4.07 Development (Absorbed) $9, $20, $0.00 $10, Royalties $0.00 $0.00 $0.00 $ Packing $50.00 $94.00 $0.00 $ Freight $0.00 $0.00 $0.00 $ Messenger $ $ $0.00 $ Miscellaneous $0.00 $ $0.00 $ Total Other Direct Charges $10, $21, $0.00 $11, Total Cost $78, $105, $0.00 $26, Selling Price 4.16 Margin Gross 4.17 Less Commission 4.18 Margin Net 4.19 Memoranda 4.20 Development - Std Drawings 4.22 Patterns 4.23 Dies and Jigs 4.24 Total (Not Including Above) 4.25 Burden - Factory 137% 194% 0% 7% 4.26 Burden - Admin. and General 50% 50% 0% 0% 4.27 Total Burden 237% 244% 0% 7% Shay #6 Technical Data Handbook Page 7 of 55
8 Item Group 09 - Shay #6 Locomotive - Manufacturing Notes Item Description Frame was spread 2" to allow oversize firebox to enter. 2" blocks welded to crossties except furnace bearers which were cut at center and filled in by welding. 1/2" x 5 1/2" liners applied between grate side rails and firebox. Future note boiler drawings outside limit on width of firebox. Future cylinder cock operating shaft 1" diameter instead of 3/4". Operating arms to be applied with taper pins instead of set screws. Forward motion valve travel 4 3/4" all cylinders. Back motion valve travel 4 25/32" all cylinders. #1 cylinder lead 9/64" forward motion. #1 cylinder lead 9/64" back motion. #2 cylinder lead 9/64" forward motion. #2 cylinder lead 9/64" back motion. #3 cylinder lead 3/16" forward motion. #3 cylinder lead 5/32" back motion. Future allow 1/2" liner bewteen front mudring lug and crosstie. Future metallic packing for cylinder valves. Future smokebox brace pads to have larger pins. Shay #6 Technical Data Handbook Page 8 of 55
9 Group - 10: Ash Pan and Oil Pan Ash Pan A Ash Pan Material Bill 1 Set 10-MO Ash Pan Hopper 2 A Ash Pan Slide Door 2 A Ash Pan Cinder Pocket A Ash Pan Side Draft Plate 1-L, 1-R 107-A Ash Pan Door Links A Ash Pan Support A Ash Pan Operator Link A Ash Pan Operator Link Lever A Ash Pan Operator Shaft A Ash Pan Operator Lever A Ash Pan Operator Lever Lock Bracket A Ash Pan Operator Lever Lock Pin U Ash Pan Lock Pin Chain 1 Set 107-A Ash Pan Slide Rigging Pin F Ash Pan Slide Rigging Pin H Ash Pan Shaft Bearing - Outisde A Ash Pan Shaft Bearing - Inside A-5012 Material Plate and Bars, Riveted Hoppers, Furnish Pan Complete Material Ordered in P.D. Furnish Stop Bolt, Cast Steel, Pattern Cast Steel, Pattern Bar Steel, Forging Sketch 10-A-5014 Plate, Forging Sketch 102-A-5014 Forging Sketch 102-A-5016 Forging Sketch 102-A-5013 Cold Rolled Steel Forging Sketch 102-A-5015 Furnish and Weld in Gusset Plates, Forging Sketch 102-A-5011 Steel, Attach Chain to Pin, Forging Sketch 522-U-428 Steel Steel Forging Sketch 102-A-5010 Angle, Weld in Lugs for Bearings Group - 11: Axles Axle A-5054 Forging Sketch 112-A-5054 Shay #6 Technical Data Handbook Page 9 of 55
10 Group - 12: Bell and Ringer Bell Ordering Print 1 M Bell Arrangement 1 Set 123-A Bell Frame A Bell Frame Machining Drawing A Bell Yoke A Bell Yoke Trunnion A Bell Yoke Trunnion B Bell Yoke Washer A Bell Tongue A Bell Tongue Fulcrum C Bell Ringer King Type 1 BR-105-F H.S. Bell, Iron, H.S. Pat. #2, H&G Part M Furnish Taper Pins, Nuts and Cotters Cast Steel, Pattern Cast Iron, Pattern Cold Rolled Steel Cold Rolled Steel 15/16" I.D. x 2 1/2" O.D. x 3/8" Thick Finished Size, Steel Cast Steel, Pattern Bar Steel U.S.M.P. Company Part BR-105-F Group - 13: Boiler Boiler Plan Sections A Boiler Plan Sections B Boiler Material Bill 1 Set 12-MO-5098-D Boiler Bracing List 1 Set 130-A Boiler Material List 1 Set 13-MO-5099-C Boiler Rivet Material 1 Set 13-MO-5100-A Boiler Dome Line & 2nd Course Seam A Boiler Test Pressure - Water Boiler Test Pressure - Steam Boiler Test Pressure - Working Shop Number 3354 Only For Future Orders Flexible Staybolts 250 P.S.I. 225 P.S.I. 200 P.S.I. Shay #6 Technical Data Handbook Page 10 of 55
11 14.01 Boiler Brace Rod Ends D Boiler Brace Rod Ends Boiler Brace Rod Ends D Boiler Brace Rod Lugs A Boiler Brace Rod Lugs D Boiler Brace Rod Lugs D Boiler Brace Rod Jaws D Boiler Brace Rod Jaws D Boiler Brace Rod Jaws A Boiler Brace Rod Jaws D Boiler Brace Rod Jaws D Boiler Throat Brace Boiler Throat Brace Stay Boiler Stay Bolt Location 1 Set 132-A Boiler Stay Bolt Schedule 1 Set 132-A Boiler Tee Bar 1 Set 130-B Boiler Mud Ring A Boiler Tube Sheet Ring B Boiler Tube Sheet Studs B Boiler Smoke Box Ring B Boiler Tube (Small) Boiler Flue (Large) M Boiler Tube Setting 1 Set Boiler Test Plate A-494 Group - 14: Boiler Details and Attachments - Tubes and Flues Forging Sketch 310-S-82 Set 2, Forging Sketch 117-F-202 Forging Sketch 310-S-150 Forging Sketch 14-A-5001 Forging Sketch 310-S-29 Forging Sketch 310-S-72 Furnish Bolts, Forging Sketch 310-S-105 Furnish Bolts, Forging Sketch 310-S-65 Furnish Bolts, Forging Sketch 310-S-276 Furnish Bolts, Forging Sketch 310-S-266 Furnish Bolts, Forging Sketch 310-S-66 Forging Sketch 11766, Line 2 Staybolt Iron, Line 2 Cast Steel, Pattern 14-4 Steel Forging Sketch 14-E " O.D. Style #4 Stamp Per Specification, Cast Brass, Pattern Group - 15: Bolts, Nuts, Studs, Pins, Bushings Shay #6 Technical Data Handbook Page 11 of 55
12 Group - 18: Brackets, Air and Steam Gauge Brackets, Cylinder Bottom Brackets Air Gauge Panel Support B Air Gauge Bracket Panel A Steam Gauge Bracket A Bottom Bracket A Bottom Bracket Caps A Bottom Bracket Bearing - Top B Bottom Bracket Bearing - Bottom B Bottom Bracket Bearing - Wedge A Bottom Bracket Wedge Screw E Bottom Bracket Wedge Screw Nut E Bottom Bracket Wedge Screw Cap B Bottom Bracket Filler Block A Lubricator Bracket Plate A Lubricator Bracket A Lubricator B Lubricator Bracket Rod Guide A-5118 Bar Steel, Forging Sketch 182-B-5120, Furnish & Weld Gussets Plate, Weld on Lug Plate, Forging Sketch 182-A-5117 Cast Steel, Pattern Cast Steel, Pattern Cast Bronze, Pattern Cast Bronze, Pattern Cast Iron, Pattern Forging Sketch 87-F-14 Steel, 1 1/4" Square x 1 3/4" Long Finished Size Steel Steel, Forging Sketch 182-A-426, R.B. Brackets, R.S. Firebox Plate, Furnish and Apply Studs Plate Plate Furnish Complete, Forging Sketch 182-A-5118 Group - 20: Brake Equipment, Foundation, Engine and Tender Air Pump Support - Front A Air Pump Support - Back A Air Pump Support Brace A Brake Cylinder Push Rod A Brake Pins B Brake Pins C Brake Pins D Brake Pins P Brake Pins M Brake Pins J Brake Pins E Brake Pins K-5312 Forging Sketch 20-A-5140, Weld Brace on Material Forging Sketch 20-A-5140, Weld Brace on Material Forging Sketch 20-A-5141, Weld Brace on Material Forging Sketch 842-A-36 Shay #6 Technical Data Handbook Page 12 of 55
13 Group - 20: Brake Equipment, Foundation, Engine and Tender (Continued) Brake Pins L Brake Pins H Brake Pins F Brake Pins N Brake Reservoir Support A-5023 Plate Brake Reservoir Support Plate A-5023 Bar Steel Brake Reservoir Support U-Bolt A-5023 Forging Sketch 20-A Brake Reservoir Support Strap A-5023 Forging Sketch 20-A Brake Reservoir Support Plate B-5023 Bar Steel Brake Equipment Material Order 1 Set 20-MO-5036-B Brake Valve Bracket A-5316 Forging Sketch 202-A-5316, Welded Construction Brake Valve Pump Drip Pan F Brake Valve Pump Drip Pan Brackets A-504 Forging Sketch 192-A Brake Valve Pump Drip Pan Brackets B-504 Forging Sketch 192-B Brake Valve Pump Drip Pan Fitting C-504 Bar Steel Brake Governor Support A-5309 Forging Sketch 202-A-5309, Furnish Gussets Brake Strainer Support B-5309 Forging Sketch 202-B Brake Equipment Res. Support N-350 Forging Sketch 192-N Brake Equipment Res. Support Blocks B-305 Tee Iron Brake Distributing Valve Bracket A-5310 Plate, Forging Sketch 202-A Brake Lever- Frame Tender A-5308 Plate Brake Lever- Frame Front A-5305 Plate Brake Lever- Frame Back A-5306 Plate Brake Lever Fulcrum - Frame Tender A-5313 Bar Steel, Forging Sketch 202-A-5313, with Gussets Brake Lever Fulcrum - Frame Front A-5314 Forging Sketch 202-A-5314, Furnish Complete with Gussets Brake Lever Fulcrum - Frame Back A-5296 Forging Sketch 202-A-5296, Furnish Complete with Gussets Brake Lever Guides - Frame Links A-5304 Forging Sketch 202-A Brake Lever Guides - Frame A-5319 Forging Sketch 202-A Brake Lever Guides - Frame B-5319 Forging Sketch 202-B Brake Lever Guides - Frame C-5319 Forging Sketch 202-C Brake Lever Guides - Frame D-5319 Forging Sketch 202-D Brake Lever Support A-5318 Angle, Forging Sketch 202-A Brake Cylinder Bracket - Frame Front A-5317 Note: , Reinforced 5/8" x 12" x 63" Steel Plate Welded Shay #6 Technical Data Handbook Page 13 of 55
14 Group - 20: Brake Equipment, Foundation, Engine and Tender (Continued) Brake Cylinder Bracket - Frame Back A Brake Rods - Frame Front B Brake Rods - Frame Back C Brake Rods - Frame Tender D Brake Head Links Truck A Brake Head Links Truck A Brake Cylinder Support - Tender A Brake Beam - Truck A Brake Beam Fulcrum Truck A Brake Beam Safety Chain Truck A Brake Beam Safety Chain Truck A Brake Hanger Lug Truck B Brake Hanger Lug Truck A Brake Heads Truck F Brake Shoes Truck A Brake Keys Truck Brake Lever Truck B Brake Lever Links Truck A Brake Hanger Lug Truck A Brake Hanger Lug Truck B Brake Links Truck A Brake Rod Truck A Brake Rod Adjustable Truck 3 Sets 202-A Brake Rod Adjustable Spud Truck A Brake Rod Adjustable Clevis Truck A Truck Brake Hanger B Truck Brake Beam - I Beam B-5311 Note: , Reinforced 5/8" x 12" x 63" Steel Plate Welded Forging Sketch 202-B-5304 Forging Sketch 202-C-5304 Forging Sketch 202-D-5304 Forging Sketch 20-R-5027 Forging Sketch 20-S-5027 Plate, Forging Sketch 202-A-5298, Furn. Studs, Gussets & Lugs I-Beam, Front of Front Truck, Rear of Tender Truck Cast Steel, Pattern A Forging Sketch 20-T-5059, Furnish Complete Forging Sketch 20-S-5059, Furnish Complete L.S. Front on Center Truck, Cast Steel, Pattern Cast Steel, Pattern Cast Steel, Pattern A Cast Iron, Pattern Standard A.A.R. Forging Sketch 202-B-5301 Forging Sketch 202-A-5301 Forging Sketch 202-A-5303 Forging Sketch 202-B-5303 Forging Sketch 202-A-5302 Forging Sketch 202-A-5300 Turn Buckle Forging Sketch 202-A-5307 Forging Sketch 202-A-5307 Forging Sketch 202-B-5302 Rear of Front, Front & Back of Center, Front of Tender Trucks Shay #6 Technical Data Handbook Page 14 of 55
15 Group - 21: Bumpers and Details Push Pole Pocket - Front Right Side A-5002 Cast Iron, Pattern Push Pole Pocket - Front Left Side B-5002 Cast Iron, Pattern Push Pole Pocket - Rear A-5002 Cast Iron, Pattern End Timber Arrangement - Front 1 Set 214-A-5037 Wood - On Engine End Timber Arrangement - Rear 1 Set 214-A-5038 Wood - On Tender End Timber Channels - Front A-5037 Channel End Timber Channels - Rear 1 See Tender Frame End Timber Back Plate - Front A-5081 Plate End Timber Angle - Front A-5037 Angle, 4" x 4" x 1/4" Group - 22: Cabs Cab A-5003 Plate & Angles, Wood Lined, Furnish Doors, Windows, etc Cab Material Bill 1 Set 22-MO-5032-A Plate & Angles, Wood Lined, Furnish Doors, Windows, etc. Group - 23: Cab Details, Apron, Brackets, Door Fixtures, Ventilator Cab Arm Rest A-5032 Wood Upholstered Cab Inspection Card Frame 1 Prime #960 Mount on Roof Lining Left Side Cab Saddle Angle A-5003 Angle, Forging Sketch 23-A Cab Deck Arrangement Left Side Seat 1 Set 232-A Cab Deck Plate Left Side Seat A-5002 Plate Cab Storm Window Right Side H-5012 Wood - Glass and Rubber Gasket Cab Storm Window Hinges 1 Pair 232-H /2" x 1 1/2" Butt Hinges Cab Storm Window Adjusting Bar A-5010 Steel, Forging Sketch 232-A-5010 Shay #6 Technical Data Handbook Page 15 of 55
16 Group - 23: Cab Details, Apron, Brackets, Door Fixtures, Ventilator (Continued) Cab Curtain - Back 1 Set 233-A Cab Curtain Eye Bolt A Cab Door Fixture Clamp A Cab Door Fixture Clamp Screw A Cab Door Fixture Clamp Slide Bar A Cab Door Fixture Rod A Cab Ventilator & Angle Frame A Cab Ventilator Fixture Lift Cab Ventilator Fixture Lift Pin Cab Ventilator Fixture Hinge Cab Ventilator Fixture Latch Stud A Cab Ventilator Hinges 1 Pair Cab Seat - Right Box A-5134 ** Cab Seat - Left Box A-5034 ** Cab Seat Deck End Plate Front - Left B Cab Seat Deck End Plate Back - Left F Cab Seat Side Plate - Left Seat E Cab Seat Side Plate - Left Seat D Cab Seat Side Plate - Right Seat C Cab Seat Cushion - Right and Left A Cab Seat Back Rest - Right and Left A Cab Seat Back Rest Brace - R & L A-5034 Complete Less Wood, Lima to Furnish Wood Work Forging Sketch 23-H-161 Cast Iron, Pattern 23-3 Forging Sketch 232-A-5018 Forging Sketch 232-A-5023 Forging Sketch 232-A-5020 #10 Plate and Angle Steel, Forging Sketch 111-F-30 1/2" Diameter x 1 3/8" Steel Rivet - Drill for 1/8" Cotter to Suit Forging Sketch 111-F-31 Steel, Furnish Nuts 8" Strap, Bend to Suit Wood. ** Note: Part Number Could Be 232-A-5034 Wood. ** Note: Part Number Could Be 232-A-5134 Plate Plate, Furnish Angle and Weld On Plate Plate Plate Complete From Goshen Complete From Goshen Spring Steel Group - 26: Cocks, Valves, Cylinder and Blow-Off Cocks, Globe Valves Air Sander Valve 1 PT-106-B U.S.M.P. Company, Leach No Air Pump Steam Valve (Turret) 1 Crane #1875-E 1 1/4" Angle, Stem for Hancock #2 Universal Joint, Loose Handle Bell Ringer Valve 1 BR 97-B U.S. M. Pkg Company, King # Bell Ringer Line Valve 1 Crane #376-E 1/4" Globe Blower Valve (Turret) 1 Crane 1875-E 1" Angle, Stem for Hancock #1 Universal Joint, Loose Handle Shay #6 Technical Data Handbook Page 16 of 55
17 Group - 26: Cocks, Valves, Cylinder and Blow-Off Cocks, Globe Valves (Continued) 2" Type F.S.D. Brass Casting, Pattern Blow Off Cock 1 Okadee 1636-A Blow Off Joint Ring S Injector Steam Valve (Turret) 2 Crane #1875-E Drain Valve Top A Drain Valve Base A Drain Valve Spring A Drain Valve A Cylinder Cock Spring Washer A Valve Extension Rod for Turret 1 Set Cylinder Cock Body A Cylinder Cock Nut A Cylinder Cock Washer A Cylinder Cock Valve A Cylinder Cock Spring A Cylinder Cock Elbow A Drain Valve Water Gauge 2 Crane #376-E Drifting Valve 1 CRane #376-E Drip Cock - Blower 1 Crane # Generator Vavle Dynamo (Turret) 1 Crane #1875-E Dynamo Line Shut Off Valve 1 Crane #376-E Fire Door Valve - Line 1 Crane # Lubricator Valve (Turret) 1 Crane #1875-E Universal Joint 2 Hancock # Universal Joint 1 Hancock # Universal Joint 2 Hancock # Universal Joint 1 Hancock # Universal Joint 1 Hancock # Universal Joint 1 Hancock # Universal Joint 1 Hancock # Power Reverse Cut Out Cock 1 West Injector Del. Drain Valves 2 Globe # Sprinkler Valve 1 Globe #700-S Sander Valve (Line) 1 Globe #516 2" Angle, Stem for Hancock #2 Universal Joint, Loose Handle Stick Brass, Drop Pipe & Sup. Damper Cylinder Lines Stick Brass, Drop Pipe & Sup. Damper Cylinder Lines Drop Pipe & Sup. Damper Cylinder Lines Brass Casting, Pattern Stick Brass Steel Rod, To Suit Erector Shop Valve Brass Casting, Pattern Stick Brass, Use Nuts Now Made Stick Brass, Re-Work Washer Now Made Valve Brass Casting, Pattern Spring Steel Wire Brass Casting, Pattern /2" Crane-Blobe, Fixed Handle 3/4" Crane-Globe, Fixed Handle 1/4" Globe, Drip Cock 1/2" Angle, Stem for #0 Hancock Universal Joint, Loose Handle 1/2" Globe 1/4" Hancock #516 1" Angle, Copper Pipe Outlet, Stem for #1 Hancock Univ'l Joint Water Gauge Top Cocks Turret Master Valve Injector Steam Valve Air Pump Steam Blower vavle Lubricator St. Line Dynamo 1/4" Globe Hancock Ohio 1/2" Hancock 1/4" Shay #6 Technical Data Handbook Page 17 of 55
18 Group - 26: Cocks, Valves, Cylinder and Blow-Off Cocks, Globe Valves (Continued) Steam Gauge Cock Test Gauge Cock Turret Elbow (Steam Injector Valve) L Turret Elbow (Dynamo) A Turret Elbow (Lubricator) M-141 Prime SC. 937, Style #4 Prime SC. 937, Style #2 In Turret, Steel Casting, Pattern In Turret, Steel Casting, Pattern In Turret, Steel Casting, Pattern Gauge Cock Gauge Cock Boss A Gauge Cock Water Gauge Arrangement - Left Side 1 Set 274-A Gauge Cock Dripper A Water Gauge Arrangement - Left Side 1 Set 274-B Water Gauge - Left Side Water Gauge - Left Side Water Gauge Upper Fitting L Water Gauge Upper Fitting Cap J Water Gauge Upper/Lower Bonnet D Water Gauge Upper Stem D Water Gauge Upper/Lower Gland A Water Gauge Upper/Lower Nut L Water Gauge Upper/Lower Washer B Water Gauge Lower Fitting D Water Gauge Lower Fitting Cap K Water Gauge Lower Fitting Nipple C Water Gauge Lower Fitting Stem H Water Gauge Lower Fitting Adapter A Water Gauge Lower Fitting Nut B-5020 Group - 27: Cocks, Valves, Gauge, Water and Special Nathan Drawing, Line Steel Nathan Drawing, Line 2 Furnish Pipe Nipple in Bottom Cock Alco 272-S-11331, Cast Iron, Pattern 423 LLW Furnish Pipe Nipple in Bottom Cock Hanlon Bolls, Eye Reflex No. 7 Hanlon Bolls, Eye Reflex No. 6 Brass Casting, Pattern Stick Brass Stick Brass Stick Brass Stick Brass Stick Brass Stick Brass Brass Casting, Pattern Stick Brass Stick Brass Stick Brass Stick Brass Stick Brass Shay #6 Technical Data Handbook Page 18 of 55
19 Group - 27: Cocks, Valves, Gauge, Water and Special (Continued) Water Gauge Upper/Lower Fitting Plugs C Water Gauge Upper Fitting Adapter H Water Gauge Upper Fitting Swivel A Water Gauge Upper Fitting Nut B Water Gauge Upper Fitting Adapter M Water Gauge Boss D Water Gauge Marker B Water Gauge Marker Bracket A Water Gauge Marker Handles A Valve Extension Handle Plate Guide A Valve Extension Handle Plate Lug A Valve Extension Handle Plate Bracket A-5022 Stick Brass Stick Brass Brazing Metal Stick Brass Stick Brass 1020 Steel White Metal Casting, Pattern Steel Bar, Forging Sketch 273-A-5006 "A" Dimension 2 1/16" Diameter Bar Steel Bar Steel, Forging Sketch 272-A-5021 Bar Steel, Forging Sketch 272-A-5022 Group - 28: Cock Rigging Blow-Off Cock Rigging 1 Set 283-A Blow-Off Cock Handle C Blow-Off Cock Rod Pin D Cylinder Cock Rod Lever Guide A Cylinder Cock Lever Link C Cylinder Cock Lever Connection B Cylinder Cock Lever Connection A Cylinder Cock Rigging Pin C Cylinder Cock Rigging Pin A Cylinder Cock Rigging Pin B Cylinder Cock Rigging Knuckle Pin Y Cylinder Cock Rigging 1 Set 288-A Cylinder Cock Shaft A Cylinder Cock Hand Lever B-5011 Forging Sketch 282-C-368 Furnish Cotter Forging Sketch 282-A-5038, Furnish Complete Cold Rolled Steel, Forging Sketch 282-C-5037 Cold Rolled Steel, Forging Sketch 282-B-5037 Cold Rolled Steel, Forging Sketch 282-A Steel 1020 Steel 1020 Steel Forging Sketch 522-Y-428, Furnish Complete Apply Chain for Lock Pin Cold Rolled Steel Steel, Forging Sketch 282-B-5011 Shay #6 Technical Data Handbook Page 19 of 55
20 Group - 28: Cock Rigging (Continued) Cylinder Cock Hand Lever Fulcrum A Cylinder Cock Shaft Lugs D Cylinder Cock Shaft Lever B Cylinder Cock Shaft A Cylinder Cock Shaft Bracket B Cylinder Cock Shaft Collar C-5038 Welded Construction, Forging Sketch 282-A-5040 Welded to Cyl. Frame and Drilled, Forging Sketch 282-D-5038 Apply Set Screw, Brass Casting, Pattern 28-1 Apply Set Screw, Brass Casting, Pattern Plate, Forging Sketch 282-B-5038 Cold Rolled Steel, Apply Set Screw Group - 29: Crank Pins and Detail Group - 30: Crossheads, Arm, Pin, Key and Shoes Crosshead B Crosshead Shoe A Crosshead Shoe Bolts B Crosshead Pin B Crosshead Key A Crosshead Pin Nuts B-5003 Cast Steel, Pattern Cast Brass, Pattern Furnish Nuts 4 1/8" Diameter x 10" Long Finished Size Chrome Vanadium, Forging Sketch 302-A /4" Hex Across Flats x 3/4" Thick, Medium Carbon Steel Shay #6 Technical Data Handbook Page 20 of 55
21 Group - 31: Cylinders and Barrel Bushings Cylinder - 1 Left, 2 Right A Cylinder Clearance 1 Set 314-A Cylinder Frame A Cylinder Frame B-5030 Cast Iron, Pattern Weld Cylinder Cock Shaft Lug On Weld Cylinder Cock Shaft Lug On, Cast Steel, Pattern Weld Cylinder Cock Shaft Lug On, Cast Steel, Pattern Group - 32: Cylinder and Steam Chest Heads and Covers Cylinder Head B Cylinder Head Casing B Steam Chest Cover - Top A Valve Chamber Head - Bottom A Valve Chamber Bushing A-5085 Cast Iron, Pattern Plate Cast Iron, Pattern Cast Iron, Pattern Cast Iron, Pattern Group - 34: Cylinder By-Pass, Relief, Vaccuum and Drifting Valves Group - 35: Die Work, Flanging Dies Shay #6 Technical Data Handbook Page 21 of 55
22 Group - 36: Dome, Cap, Casing and Ring Dome B Dome Flange H Dome Flange Radius Dome Cap C Dome Ring A Dome Casing - Complete B Dome Casing - Stud 1 40 inches Furnish Cover Plates, etc. Steel, To Suit Group - 37: Draw Gear, Engine, Coupler, Uncoupling Rigging, Draw Bars, Safety Chains Uncoupling Shaft Bracket - Rear A Uncoupling Shaft Bracket - Front A Draft Gear 2 Sets Miner Coupler - Front Engine J Coupler - Back Trender J Coupler Lock Lifter - Front/Rear 2 Sets Uncoupling Shaft Washers - Front/Rear A Uncoupling Shaft - Front A Uncoupling Shaft - Rear A Uncoupling Shaft Bracket - Rear A Uncoupling Shaft Bracket - Rear A Uncoupling Shaft Bracket - Front A Uncoupling Shaft Bracket - Front A Drawhead Carrier A Drawhead Carrier - Front A Drawhead Carrier - Rear A Drawhead Carrier Block - Follower A Drawhead Carrier Shims - Coupler Yoke A Drawhead Carrier Frame - F. Complete A-5025 Forging Sketch 37-A-5008 Forging Sketch 37-A-5008 Forging Sketch Miner-A-22-XB N.M.& SC Co J, AAR. Std. Type "E", 6" x 8" Shank N.M.& SC Co J, AAR. Std. Type "E", 6" x 8" Shank N.M.C E, SET-A-1470 Steel, Weld on Shaft Forging Sketch 372-A-5098 Forging Sketch 372-A-5098 Forging Sketch 37-A-5007 Forging Sketch 37-B-5007 Forging Sketch 37-A-5007 Forging Sketch 37-B-5007 Cast Steel, Pattern A (Sent 1 12/5/46 R ) Forging Sketch 104-F-66 Forging Sketch 104-F-66 Plate, 2 1/4" x 9" x 12 1/2" Bar, 1" x 5" x 9" Welded Construction Shay #6 Technical Data Handbook Page 22 of 55
23 Group - 37: Draw Gear, Engine, Coupler, Uncoupling Rigging, Draw Bars, Safety Chains (Continued) Detail "X" Drawhead Carrier Frame - F. Tie Plate A Drawhead Carrier Tie Plate - Rear A Drawhead Carrier Tie Plate Ang. - Rear A Drawhead Carrier Yoke - Front A Drawhead Carrier Yoke - Rear A Drawhead Bar Guide - Engine B Drawhead Bar Guide - Tender A Drawhead Bar Pin - Rear of Coal Bunk B Drawhead Pin - Frornt and Rear L Safety Link A Safety Link Pins - Front Water Tank A Safety Link Pins Keys A Eccentric - No. 1 Cylinder A Eccentric - No. 3 Cylinder A Eccentric - No. 2 Cylinder - Top A Eccentric - No. 2 Cylinder - Bottom A Eccentirc Key A Eccentirc Stud A Eccentric Strap Top A Eccentric Strap Bottom A Eccentric Strap Bolts A Eccentric Strap Liner 6 Pair 392-A Eccentric Strap Filler Shims A Eccentric Strap Liner Material Order 2 Tubs 39-MO Eccentric Rod - #1 Cylinder - Fwd A Eccentric Rod - #1 Cylinder - Bkw A Eccentric Rod Pin A Eccentric Rod - #2 & 3 Cylinder - Fwd A Eccentric Rod - #2 & 3 Cylinder - Bkw A Eccentric Rod Bolts Plate Angles, Weld to Tender Frame Forging Sketch 460-S-120 Forging Sketch 460-S-120 Cast Steel, Pattern Cast Steel, Pattern Steel, Forging Sketch 372-B-5070 Forging Sketch 372-L-147 Steel, Forging Sketch 372-A-5082 Steel, Forging Sketch 372-A-5083 Bar Steel Group - 39: Eccentrics, Cranks, Straps and Rods Cast Iron, Pattern Cast Iron, Pattern Cast Iron, Pattern Cast Iron, Pattern Tool Steel Steel Cast Steel, Pattern A Cast Steel, Pattern Steel, Furnish Nuts and Cotters High Strength Gun Iron #22 Steel High Strength Gun Iron, Pattern Steel, Forging Sketch 392-A-5113 Steel, Forging Sketch 392-A-5115 Steel, Furnish Nuts, Dowels, Cotters, etc. Steel, Forging Sketch 392-A-5112 Steel, Forging Sketch 392-A-5114 See Bolt List Shay #6 Technical Data Handbook Page 23 of 55
24 Group - 42: Erecting Cards, Elevations Backhead Arrangement 1 Set 428-A Erecting Plan - Elevation 1 Set 420-A-5014 Group - 43: Erecting Cards, Cross Sections Erecting Plans - Sections 1 Set 430-A-5000 Group - 44: Exhaust Pipe and Nozzles Exhaust Drop Pipe A Exhaust Pipe Joint Ring P Exhaust Pipe Drop Pipe Gasket A-5112 Copper Exhaust Nozzle A-5006 Cast Iron, Pattern Exhaust Pipe A-5006 Cast Iron, Pattern Exhaust Pipe Gasket A-5110 Johns Manville Exhaust Blower Ring and Brackets 1 Set 442-A Exhaust Flange A Exhaust Pipe Manifold A Exhaust Pipe Manifold A Exhaust Slip Joint Gland A Exhaust Pipe Slip Joint A Exhaust Pipe Joint Ring S Exhaust Slip Joint Packing 1 Set 442-A Exhaust Pipe Manifold A Exhaust Man. Joint Ring - #3 Cyl C Exhaust Man. Joint Ring - #1 & 2 Cyl R Exhaust Pipe - Cylinder A " St. Wt. Pipe Exhaust Pipe Flange - Cylinder A-5109 Cast Steel, Pattern Cast Iron, Pattern Furnish Liner Slip Joint and Drop Pipe, Cast Iron, Pattern Furnisg Complete with 3 Supports Cast Iron, Pattern Front Section, Cast Steel, Pattern Center Section, Cast Steel, Pattern Cast Iron, Pattern Cast Iron, Pattern Exhaust Pipe and Pipe Flange, Cast Iron, Pattern /4" Diameter Asbestos Rope Packing Rear Section, Cast Steel, Pattern Cast Iron, Pattern Cast Iron, Pattern Shay #6 Technical Data Handbook Page 24 of 55
25 Group - 45: Fire Door, Fire Brick and Tubes Fire Brick 1 Set 454-A Fire Brick Arch Tube A Fire Brick Arch Tube Setting A Fire Door 1 C J Fire Door Frame 1 D J F.R.S. Co. C J-Line #1, Butterfly No. 8A F.R.S. Co. D J-Line #1 Group - 48: Frames and Details Frame - Complete 1 Set 480-A Frame Boiler Saddle Right A Frame Boiler Saddle Left A Frame End Casting Plate - Rear Foot A Frame Fabricated Angle 1R, 1L 482-A Frame Material Order 1 Set 48-MO Frame Rivet Material 1 Set 48-MO Frame Center Plate - Front A Frame Center Plate - Rear B Frame Side Bearing 2R, 2L 480-A Frame Jacking Bracket 1R, 1L 480-A Frame Base A Frame Base A Frame Base 488-A Frame Base 488-A Frame Pit Timber Brace A Frame Smoke Brace Pin C Frame Smoke Box Brace Pad A Furnace Bearer - Front A Furnace Bearer - Rear A Furnace Bearer Plate A Furnace Bearer Fill Blocks - Front B-5134 Built Up Girder Type, Furnish Angles, Fillers, Bolsters, Liners Cast Iron, Pattern Cast Iron, Pattern Cast Steel, Pattern B Welded Construction, Forging Sketch 482-A-5217 Cast Steel, Pattern Cast Steel, Pattern Bar Steel, 1 1/4" x 6" x 20" Long Forging Sketch 48-E-5047 Forging Sketch 48-J " x 6" x 73" Long Frame Reinforcement After Shipment, 10/16/46, R Frame Base Applied to 487-A /10/45 Forging Sketch 48-S-5004 Steel, Furnish Bolt and Nut Cast Iron, Pattern Cast Steel, Pattern Cast Steel, Pattern Plate Cast Steel, Pattern Shay #6 Technical Data Handbook Page 25 of 55
26 Group - 49: Gauges, Templates and Jigs Group - 50: Guides, Yoke and End Guide A-5033 Machine Right and Left in Sets, Cast Iron, Pattern 50-3 Group - 51: Grate Arrangement Grate Arrangement 1 Set 517-A-5002 Furnish Fillers and Chip Side Frames to Suit Group - 52: Grate Details Grate Lever Fulcrum A-5003 Cast Steel, Pattern Grate Bars A-5031 Cast Iron, Pattern Grate Bars Center Rail Support A-5023 Cast Iron, Pattern Grate Center Rail A-5021 Cast Iron, Pattern Grate Side Rail A-5022 Cast Iron, Pattern , See Note on Next Entry Grate Side Rail B-5022 Future 1/2" Liners Applied Right and Left to # Grate Cross Brace A-5028 Cast Iron, Pattern Grate Cross Brace Support A-5154 Forging Sketch 522-A Grate Shaker Pins L-1125 Forging Sketch 522-L Grate Dead Plate A-5029 Cast Iron, Pattern Shay #6 Technical Data Handbook Page 26 of 55
27 Group - 52: Grate Details (Continued) Grate Shaker Shaft Bkt. Latch - Front A Grate Shaker Shaft Bkt. Latch - Back B Grate Shaker Lever A Grate Shaker Handle A Grate Shaker Handle Latch Pin B Grate Shaker Handle Pin A Grate Shaker Lever Connection - Back A Grate Shaker Lever Connection - Front B Grate Shaker Connection Bar A Grate Shaker Connection Bar Lug A-5152 Cast Steel, Pattern Cast Steel, Pattern Forging Sketch 522-A-5153 Cast Steel, Pattern Forging Sketch 522-B-1271 Forging Sketch 522-A-1271 Forging Sketch 522-A-5155 Forging Sketch 522-B-5155 Bar Steel, Forging Sketch 522-A-5152 Plate, Forging Sketch 522-A-5152 Group - 53: Hand Rails and Steps, Engine and Tender Hand Rail - Right Side 1 Set Hand Rail - Left Side 1 Set Hand Rail Tee - Right Side A Hand Rail Flange - Right Side B Hand Rail Flange - Left Side A Hand Rail Coupling - Right Side B Hand Rail Flanges - Right Side A Head Light Grab Handle A Cab Ladder Arrangement - Left Side 1 Set 534-A Cab Ladder Arrangement - Right Side 1 Set 534-B Cab Handle - Right B Cab Handle - Left A End Timber Grab Handle - Front A End Timber Handle - Rear A End Timber Handle - Front A End Timber Handle Bracket - Rear A /4" Diam. Steel Rod, See Erection Dwg, Drill and Bend to Suit 1" Diam. Conduit Pipe, See Erection Dwg, Drill and Bend to Suit Cast Steel, Pattern Cast Steel, Pattern Cast Steel, Pattern Pipe Cast Steel, Pattern Forging Sketch 532-A-5106 Furnish Filler Blocks Furnish Filler Blocks 1" Exh. Hvy. Pipe, Apply Pipe Caps and Rivets at Assembly 1" Exh. Hvy. Pipe, Apply Pipe Caps and Rivets at Assembly Forging Sketch 103-F-171 Tender, Forging Sketch 53-A-5007 Engine, Forging Sketch 53-A-5007 Tender, Forging Sketch 53-A-5008 Shay #6 Technical Data Handbook Page 27 of 55
28 Group - 53: Hand Rails and Steps, Engine and Tender (Continued) End Timber Handle Bracket - Front A Cab Handle - Left Side Roof A Sand Box Handle D Bottom Bracket Step A Cab Ladder Frame - Right Side A Cab Ladder Frame Steps - Right Side 1 Set 532-A Cab Ladder Frame - Left Side A Cab Ladder Frame Steps - Left Side 1 Set 532-A Cab Ladder Brace - Left Side A Cab Ladder Brace - Right Side B End Timber Step Brace - Engine 1R, 1L 214-A End Timber Step Brace - Tender A End Timber Step - Front - Engine 1R, 1L 214-A End Timber Step - Back - Tender 1R, 1L 214-A End Timber Step Bracket - Engine A End Timber Step Bracket - Tender A Sand Box Step A Sand Box Step Bracket A Sand Box Step Bracket B Hand Rail Column K Hand Rail Column M Hand Rail Column M Hand Rail Column M Hand Rail Column C Hand Rail Column J Hand Rail Column Caps K Hand Rail Column Caps M Hand Rail Column Caps C Hand Rail Column Washers A Hand Rail Column Washers K Hand Rail Column Washers B Hand Rail Column Bracket A Hand Rail Post A-5096 Engine, Forging Sketch 53-A-5008 Forging Sketch 532-A-5094 Forging Sketch 732-D-143 Forging Sketch 532-A-5097 Forging Sketch 532-A-5098 Spot Weld Treads, Forging Sketch 532-A-5098 Forging Sketch 532-A-5099 Spot Weld Treads, Forging Sketch 532-A-5099 Forging Sketch 532-A-5100 Forging Sketch 532-B-5101 Bar Steel Bar Steel Wood Tread Wood Tread Forging Sketch 53-B-5006 Forging Sketch 53-B-5006 Cast Iron, Pattern Forging Sketch 732-A-5042 Forging Sketch 732-B /2", Left and Right of Smoke Box, Cast Steel, Pattern /2", 1st C.R. Front Left Side, Cast Steel, Pattern /2", 1st C.R. Back Left Side, Cast Steel, Pattern /2", Firebox Back Left Side, Cast Steel, Pattern ", Dome Course Left Side, Cast Steel, Pattern /2", Firebox Front Left Side, Cast Steel, Pattern Cast Steel, Pattern Cast Steel, Pattern Cast Steel, Pattern ", 1st C.R. Front Left Side, Cast Iron, Pattern ", 1st C.R. Back Left Side, Cast Iron, Pattern /2", Firebox Front and Back Side, Cast Iron, Pattern Dome CR. Left Side, Forging Sketch 532-A-5095, Apply Rivets On Running Board Right Side, Forging Sketch 532-A-5096 Shay #6 Technical Data Handbook Page 28 of 55
29 Group - 53: Hand Rails and Steps, Engine and Tender (Continued) Hand Rail Post B-5096 On Running Board Right Side, Forging Sketch 532-B Hand Rail Post C-5096 On Running Board Right Side, Forging Sketch 532-C Cab Handle Post - Top A-5102 Forging Sketch 532-A Cylinder Frame Grab Handle 2R, 1L 532-A-5104 Forging Sketch 532-A Cab Handle Post 1R, 1L 532-A-5103 Forging Sketch 532-A Cab Handle Post 1R, 1L 532-A-5105 Forging Sketch 532-A-5105 Group - 54: Headlights and Signal Attachments, Lamps, Electric Wiring Electrical Material Order 1 Set 54-MO Electric Wiring 1 Set 543-A Head Light, Electric Head Light Bracket A Generator Bracket A Generator Bracket Washers B Lamp Bracket Studs A Number Plate B Number Plate Stud 1 A Builder's Card A Name Plate 2 B Patent Plate A Superheater Patent Plate Head Light Turbo Generator 1 11-F-400-C-K Valve Name Plate N Valve Name Plate E Valve Name Plate L Valve Name Plate D Valve Name Plate F Valve Name Plate A-121 Furnish Washers, Nuts, and Bolts Pyle National , 12-C-640 Forging Sketch 542-A-5032 Plate, Forging Sketch 542-A /2", Cast Iron, Pattern Steel, Furnish Nuts and Lock Washers Apply Road Number Per Specification, Cast Iron, Pattern 54-6 Steel, Furnish Nuts Cast Iron, Pattern Cast Iron, Pattern 54-4, Locate on Side of Cab Right & Left Cast Iron, Pattern Furnished by Supplier, See Elevation Drawing for Location Pyle National, 11-F-400-C-K-240 Injector, Cast White Metal, Pattern Blower, Cast White Metal, Pattern Turret, Cast White Metal, Pattern Air Pump, Cast White Metal, Pattern Dynamo, Cast White Metal, Pattern Water Glass, Cast White Metal, Pattern Shay #6 Technical Data Handbook Page 29 of 55
30 Group - 54: Headlights and Signal Attachments, Lamps, Electric Wiring (Continued) Valve Name Plate K-121 Lubricator, Cast White Metal, Pattern Conduit Clamp Base A-5035 Bar Steel, Apply Stud Conduit Clamp Cap A-5035 Forging Sketch 542-A Conduit Clamp J-Bolts H-517 Forging Sketch 542-H Conduit Clamp J-Bolts F-517 Forging Sketch 542-F Conduit Clips A-5001 Angle, See Detail "P" Conduit Clips A-5001 Forging Sketch 63-S Electric Fixture Bracket A-5034 Steel Electric Fixture Bracket B-5034 Plate Group - 55: Injectors, Boiler Checks and Strainers Injectors 1R, 1L Injectors Bracket - Left Side A Injectors Starting Lever B Injectors Starting Lever Handle A Injectors Starting Lever Universal Joint 2 Sets A Injector Check Valve Injector Control Rod Injector Rod Jaw K Injector Bracket - Right Side A Injector Hose Connection A Injector Hose Connection Nuts A Injector Hose Connection Nipples A Injector Water Valve Rod Extention 2 Sets Feed Hoses 2 Class "N" Lifting Type, 10 1/2" Size, Seller #31222 Bar Steel, Forging Sketch 552-A-5019 Sellers # B Sellers # A Sellers # A Sellers #40553, Style K-2 3/8" I.P. Length to Suit Erector Shop, Apply Pin and Handle Forging Sketch 732-K-28 Steel Plate, Forging Sketch 552-A-5020 Cast Iron, Pattern Cast Brass, Pattern Cast Brass, Pattern Steel Rod, Machine Ends and Length to Suit in Erection Shop 2 1/2" x 54" Shay #6 Technical Data Handbook Page 30 of 55
British Railways Standard Locomotives Microfilm Lists. British Railways Standard Locomotives Derby Microfilm List
British Railways Standard Locomotives Microfilm Lists British Railways Standard Locomotives Derby Microfilm List Drawings 26047 to 26073 have had their original Timken drawing number added to the description.
More informationSTEAM ENGINE C&O No. 308
Deerfield and Roundabout Railway STEAM ENGINE C&O No. 308 Operational Information for Engineers September 2, 2018 4-6-4 Type Locomotive, for passenger & freight service. Patterned after Chesapeake & Ohio,
More informationCompletion Of Heritage Annual Inspection Steam Locomotives
Page 1 of 10 Completion Of Heritage Annual Inspection Steam Locomotives This cover sheet is to be completed by the inspector for each Heritage Vehicle inspected. The Heritage Vehicle Provider is to provide
More informationCAL SCALE. # Air brake Set Single pumps. # Air & signal hoses. # Air Pump, smoke box front
A HO Lost Wax Brass AIR BRAKES CAL SCALE A Divison of Bowser Mfg. 1302 JORDAN AVE, PO BOX 322 MONTOURSVILLE, PA 17754 #190-359 Brake set, HSC Webco #190-366 Air brake stand, old style #190-272 Air brake
More informationPH:
Item Number Item Description Adapters 100512 Adapter, Roller Bearing, 6 x 11, H/C&S, New 100513 Adapter, Roller Bearing, 6 x 11, H/C, New 100515 Adapter, Roller Bearing, 6 x 11, Standard, New 100667 Adapter,
More informationBOWSER - PARTS Air compresser mounting brkt Air compressor Back plate for LEAD Cast K Air tank.
A 70044 Air compressor 70111 Air compressor 70192 Air compresser mounting brkt. B 15011 Bearing, driver 1/8" hole 15012 Bearing, driver, square, 1/8" hole, for.040 side rails on underframe 908 Brass bearing,
More informationAmsted Rail POCKET INSPECTION GUIDE. Freight Railcars
Amsted Rail POCKET INSPECTION GUIDE Freight Railcars 1 Table of Contents Introduction...4 Safety...5 Training classes offered...6 Articulated Connector...7 Axles...8 Brake Rigging...9 Constant Contact
More informationDrawing Number Rev Category Class Additional Classes Description Issue Date
Creator page 1 of 53 12-2369 28 Reading RR Z-225 CRANE. Wreck Crane [also three similar unnumbered crane drawings dated September 8-14-1890 27x38. 1875, March 1879 and June 1879] 12-2369 28 Reading RR
More informationTRUCKINGTRUTH.COM T T. Daniel B s Pre-Trip Inspection Checklist
TRUCKINGTRUTH.COM T T Daniel B s Pre-Trip Inspection Checklist 1 My pre-trip begins as I approach the vehicle. I am looking for leaks, leaning one way or the other (which may indicate a low tire or bad
More informationG85CS Parts list. Frank Kyul, Netherlands
G85CS Parts list Frank Kyul, Netherlands http://home.wanadoo.nl/fxkuyl/ CYLINDER BARREL & HEAD 022298 Barrel Cylinder 1 022515 Washer Cylinder Base 1 015351 Nut. Sleeve Cylinder Head 4 042157 Washer Sleeve
More informationATV I l. l u. r a. Parts Manual ARCTIC CAT. 250 cc/300 cc
2000 I l l u st ATV 250 cc/300 cc Model No. A2000ATE2AUSG (250 - Green) Model No. A2000ATE2AUSR (250 - Red) Model No. A2000ATF2AUSG (300 2x4 - Green) Model No. A2000ATF2AUSR (300 2x4 - Red) Model No. A2000ATF4AUSG
More informationWEAVER JACK CORP. MASTER PARTS PRICE & IDENTIFICATION LIST. (517) Fax (517) MINIMUM BILLING $20.00
EFFECTIVE JULY 1, 2014 WEAVER JACK CORP. MASTER PARTS PRICE & IDENTIFICATION LIST (517) 263-6500 Fax (517) 263-2810 MINIMUM BILLING $20.00 THIS PRICE LIST SUPERSEDES ALL PREVIOUS PARTS PRICE LISTS (Prices
More informationFerguson Cylinder Diesel Engine Parts catalogue and price list. Discount Tractor Parts. Ph
Ferguson 35 3 Cylinder Diesel Engine Parts catalogue and price list Discount Tractor Parts Ph 0800 872 272 Prices in this catalogue are plus GST and subject to change Front Axle With inner brg I.D. 32mm
More informationX4 (GREEN) (A2000ATF2AUSG) Page 1 of 80 AIR INTAKE ASSEMBLY
2000 300 2X4 (GREEN) (A2000ATF2AUSG) Page 1 of 80 AIR INTAKE ASSEMBLY 2000 300 2X4 (GREEN) (A2000ATF2AUSG) Page 2 of 80 AIR INTAKE ASSEMBLY Ref # Part Number Qty S/P/F Description 1 3570-001 1 /P Intake,
More informationPARTS MANUAL THIS PAGE INTENTIONALLY LEFT BLANK. Ag-Bag International, Ltd. G7000 June Appendix A
The parts manual is organized into groups, it is designed to make the locating of parts easier. The exploded drawings also show assembly paths. All parts listed are available from your authorized Ag-Bag
More information14A6816H190 GT-2150 (2003) Page 1 of 28 Carburetor
14A6816H190 GT-2150 (2003) Page 1 of 28 Carburetor 14A6816H190 GT-2150 (2003) Page 2 of 28 Carburetor TC-640221 1 /P Carburetor (Incl 184 of Engine Parts Lists) 1 TC-640216 1 Throttle Shaft & Lever Assembly
More informationNorden. A Lancashire Mill Engine. Scale: 1:12
Scale: 1:12 Neil M. Wyatt February 2009 Fig. 1: General Arrangement General Arrangement Sheet: 1 An Old Steam Engine DEAR SIR, In the ruins of an old mill at, near Rochdale, there is an old steam engine
More informationPARTS CATALOGUE. Rockford Motors inc.
PARTS CATALOGUE Rockford Motors inc. INSTRUCTIONS FOR USING THE PARTS CATALOGUE 1. This catalogue covers all the items of genuine parts and tools of BRIDGESTONE 350 GTR and 350 GTO motorcycles. 2. Please
More informationCYLINDER. Ref. Part No. Number Description Qty Remarks
A1 CYLINDER 1 J38-11102-00-00 CYLINDER HEAD ASSEMBLY. 1 2 J38-11133-09-00. GUIDE, INTAKE VALVE..... 2 3 99510-12016-00 PIN, DOWEL.............. 2 4 95811-08070-00 BOLT, FLANGE............ 3 5 95811-08045-00
More informationFor Discount Tecumseh Engine Parts Call or HH E Page 1 of 8 Engine Parts List #1
HH60-105080E Page 1 of 8 Engine Parts List #1 HH60-105080E Page 2 of 8 Engine Parts List #1 1 34761 0 Cylinder Assy. (Cast iron liner) (2-5/8" 2 27652 0 Pin, Dowel 3 27642 0 Plug, Drain 4 27876B 0 Seal,
More informationCYLINDER HEAD. Ref. Part No. Number Description Qty Remarks
A1 CYLINDER HEAD 1 JN6-11102-00-00 HEAD, CYLINDER.......... 1 2 JN6-11133-10-00. GUIDE, VALVE............ 2 3 JN6-11181-00-00 GASKET, CYLINDER HEAD... 1 4 95817-10070-00 BOLT, FLANGE............ 4 5 99530-14016-00
More informationCS Stationary Engines
CS Stationary Engines Listeroid or Indian Lister or Lister Clones or generally speaking Lister CS (cold start) referred to as stationary engines, are one of the most versatile long running stationary engines
More informationHUDSON CHASSIS PARTS LIST
1940-1951 HUDSON CHASSIS PARTS LIST 5 HUDSON CHASSIS PARTS - 1940-1951 Front Suspension See Fig. 1 1 - Upper Support Arm & Pivot Assembly 159728-1940, 1941, first type 1942 (forged piece) (R.H.). 159729-1940,
More informationReplacement parts to fit FORD ALPHABETICAL INDEX
ALPHABETICAL INDEX A Adaptor, Hydraulic, 247, 249 to 250 Adaptor, PTO Shaft, 210 Air Cleaner, 157 to 158 Bowl, 157 Door, 273 Gasket, 159 Hose, 159 Spring, 158 Tube, 158 Air Conditioning Compressors, 282
More informationCYLINDER. Ref. Part No. Number Description Qty Remarks
A1 CYLINDER 1 J38-11102-00-00 CYLINDER HEAD ASSEMBLY. 1 2 J38-11133-09-00. GUIDE, INTAKE VALVE..... 2 3 99510-12016-00 PIN, DOWEL.............. 2 4 95811-08070-00 BOLT, FLANGE............ 3 5 95811-08045-00
More informationFASTENERS, SPRINGS, DETENT BALLS & MISC. HARDWARE PAINT, SEALANT, ADHESIVES, DECALS & LEAK DETECTORS
CROSS REFERENCE LANDING LEG PARTS TWISTLOCK & PINLOCK ASSEMBLIES & PARTS STEEL PANELS & STRUCTURAL STEEL ALUMINUM EXTRUSIONS & STRUCTUAL COMPONENTS DOOR HARDWARE AXLES, SUSPENSION PARTS, 5TH WHEEL & COMPONENTS
More information365L (2001) Page 1 of 36 54" Deck Assembly
365L (2001) Page 1 of 36 54" Deck Assembly 365L (2001) Page 2 of 36 54" Deck Assembly 1 720-0241 1 S Wing Nut Knob 2 703-2817 1 Belt Cover LH 3 703-2816 1 Belt Cover RH 4 747-3306 1 Idler Spring Mounting
More informationMAN B&W ME Engine Description. Page 1 of 6. Frame Box
ME Engine Description Page 1 of 6 Please note that engines built by our licensees are in accordance with MAN Diesel & Turbo drawings and standards but, in certain cases, some local standards may be applied;
More information700 Diesel EFT Model Number A2013TBT4DETG SHARE OUR PASSION.
2013 700 Diesel EFT Model Number A2013TBT4DETG SHARE OUR PASSION. TM TABLE OF CONTENTS 2013 ATV 700 Diesel EFT Green (Model No. A2013TBT4DETG) FRONT RACK, BODY PANEL, AND HEADLIGHT ASSEMBLIES... 1 REAR
More informationParts Description 2 1/2 Ton Multi-Fuel Part Number NSN
Parts Description 2 1/2 Ton Multi-Fuel Part Number NSN Filter, M49C Fuel Tanker 4330-00-983- CP20452-0 0998 Tube, M49C Fuel Tanker Pickup Element, Air cleaner 2940-00-804-10912373 7898 Cable, Engine Stop
More informationJDWDS. No: DHR-B-45-01
.0.0.0... NOTE: THE ORIGINAL DESIGN OF THIS MODEL ENGINE WAS MADE BY Mr. H.E.SCHEELE, AND PUBLISHED IN THE DUTCH MAGAZINE "ONDER STOOM", MAGAZINE NUMBERS TO GENERAL ARRANGEMENT E-MAIL: dewaal@xtra.co.nz.
More informationUNIVERSAL ATOMIC DIESEL MODEL (16 H.P.) PARTS MANUAL. Universal Motors
UNIVERSAL ATOMIC DIESEL MODEL 20 5416 (16 H.P.) PARTS MANUAL Universal Motors This copy of the Universal Motors Owners Manual has been re-created using images computer scanned from a manual rather than
More information1000 Mud Pro Model Number A2013MLW1PUSN Model Number A2013MLW1POSN - International SHARE OUR PASSION.
2013 1000 Mud Pro Model Number A2013MLW1PUSN Model Number A2013MLW1POSN - International TM SHARE OUR PASSION. TABLE OF CONTENTS 2013 ATV 1000 Mud Pro (Model No. A2013MLW1PUSN) (Model No. A2013MLW1POSN
More informationFinney7 BEYER PEACOCK BUILT LOCOMOTIVE
BEYER PEACOCK BUILT LOCOMOTIVE Fig 1. Beyer, Peacock Built Locomotive Nos. 415-426 Depicted as built with short tanks, blower valve on the left, small dome, low tank front, 3 0 trailing wheels, snap head
More informationBMW 327 Price list. engine block, crankshaft, bearings, cylinder head
BMW 327 Price list Tafel 1 engine block, crankshaft, bearings, cylinder head engine block : 3 stud for center main bearing cap 9 4 bushing for oil pump drive 36 5 stud for rear main bearing cover 9 6 tab
More informationMAN Energy Solutions
ME Engine Description Page 1 of 6 Please note that engines built by our licensees are in accordance with drawings and standards but, in certain cases, some local standards may be applied; however, all
More informationCYLINDER HEAD CONTINUED ON NEXT FRAME. Ref. Part No. Number Description Qty Remarks
A1 A2 A3 A4 CYLINDER HEAD 1 3TB-11101-02-00 CYLINDER HEAD ASSY...... 1 2 4H7-11133-10-00. GUIDE, INTAKE VALVE..... 4 3 93440-12052-00. CIRCLIP................. 4 4 90116-06475-00. BOLT, STUD.............
More informationKEROSINE FIRED MODEL STEAM TRACTION ENGINE CALLED "JULIAN"
0........ DRAWING CONTENTS GENERAL ARRANGEMENT PROJECT No 0-0-00 J.A.M. DE WAAL. BRIGHTWELL STREET PAPAKURA. NEW ZEALAND. PHONE: OO 0. MOB: 000 JUNE-0 SHEET: 0 OF DWG SCALE: NTS @A OR AS SHOWN J.A.M. DE
More informationRetriever 5800G/P/D. revised 2/01 Form Number
Retriever 5800G/P/D PARTS LIST Advance MODELS 56482005, 56482010, 56482015 This parts list is for machines after serial number 221134 All models covered in this manual are OBSOLETE revised 2/01 Form Number
More informationCYLINDER HEAD CONTINUED ON NEXT FRAME. Ref. Part No. Number Description Qty Remarks
A1 A2 A3 A4 CYLINDER HEAD 1 3TB-11101-02-00 CYLINDER HEAD ASSY...... 1 2 4H7-11133-10-00. GUIDE, INTAKE VALVE..... 4 3 93440-12052-00. CIRCLIP................. 4 4 90116-06475-00. BOLT, STUD.............
More information1000 XT Model Number A2013AGW1PUSW Model Number A2013AGW1POSW - International SHARE OUR PASSION.
2013 1000 XT Model Number A2013AGW1PUSW Model Number A2013AGW1POSW - International TM SHARE OUR PASSION. TABLE OF CONTENTS 2013 ATV 1000 XT (Model No. A2013AGW1PUSW) (Model No. A2013AGW1POSW - International)
More informationBRISTOL SOCIETY OF MODEL & EXPERIMENTAL ENGINEERS ASHTON COURT ESTATE MINIATURE RAILWAY
BRISTOL SOCIETY OF MODEL & EXPERIMENTAL ENGINEERS ASHTON COURT ESTATE MINIATURE RAILWAY Miniature Locomotive Driver Training and Authorisation Issue 3 March 2016 Before commencing training, please ensure
More information5/30/2014 F2.5LMHA 0313 / SCHEDULED SERVICE PARTS Yamaha Motor Corporation, U.S.A. All rights reserved.
F.5LMHA 033 Page of 4 5/30/04 F.5LMHA 033 / SCHEDULED SERVICE PARTS 04 Yamaha Motor Corporation, U.S.A. All rights reserved. F.5LMHA 033 Page of 4 5/30/04 Part List F.5LMHA 033 / SCHEDULED SERVICE PARTS
More informationPart list for Kawasaki H2, 1972
Part list for Kawasaki H2, 972 . Cylinder head, cylinder. . Cylinder head, cylinder. 9205-049 NUT 0 m/m 2 2 40B400 WASHER-plain 4 m/m 2 3 46E400 WASHER-spring 4 m/m 2 4 92070-036 SPARK PLUG NGK B9 HS 3
More informationFreight Car Maintenance Inspection
ASSOCIATION OF AMERICAN RAILROADS Mechanical Inspection Department Page 1 of 8 A. Outbound Inspection (Completed Cars) Reporting Reason Bad Ordered Marks Exception Noted Maj Mod Min Load or Empty Status/Comments
More informationPARTS LIST PONY 20 SCA
PARTS LIST PONY 20 SCA WIRING DIAGRAM PART NO. PART DESCRIPTION 4990601 GEARMOTOR - 120 VOLT 4990581 GEARMOTOR - 240 VOLT 4890391 VAC MOTOR - 115 VOLT 4891251 VAC MOTOR - 240 VOLT 4991321 BRUSH MOTOR -
More informationFinney7 PC May17 PRINCESS CORONATION. Fig 1. GA Curved Footplate
Fig 1. GA Curved Footplate PC - 5 Fig 2. GA Utility Footplate PC - 6 COUPLING RODS & FRAME ASSEMBLY COUPLING RODS. The coupling rods are now made so that they can be used as a jig to align the remaining
More information9/7/2014 F9.9MSHV 1997 / CYLINDER CRANKCASE Yamaha Motor Corporation, U.S.A. All rights reserved.
F9.9MSHV 997 Page of 45 9/7/04 F9.9MSHV 997 / CYLINDER CRANKCASE 04 Yamaha Motor Corporation, U.S.A. All rights reserved. F9.9MSHV 997 Page of 45 9/7/04 Part List F9.9MSHV 997 / CYLINDER CRANKCASE REF
More informationFINNEY7. 24 Jul 18 A3-4 LNER A3. Fig 1. General Arrangement
Fig 1. General Arrangement - 4 COUPLING RODS. The coupling rods are now made so that they can be used as a jig to align the hornguides accurately. First drill out all the crankpin holes to a convenient
More information3-CAR CARRIER PARTS MANUAL
-CAR CARRIER PARTS MANUAL 080 Hykes Road Greencastle, PA Phone () 9- www.jerr-dan.com --00009 Rev - February 0, 009 009 Jerr-Dan Corporation. All Rights Reserved. -Car Carrier Parts Manual - Page --00009
More informationHUDSON-ESSEX SUPPLEMENTARY BODY PARTS LIST SEDAN 7-PASSENGER SUNSEDAN
HUDSON-ESSEX SUPPLEMENTARY BODY PARTS LIST SEDAN 7-PASSENGER ROADSTER PHAETON SUNSEDAN Essex s Numbered 57 and Upward s Numbered 930 and Upward (9") s Numbered 599 and Upward (") June 930 HUDSON MOTOR
More informationALUMINUM & STEEL CAR CARRIERS
OWNER'S MANUAL ALUMINUM & STEEL CAR CARRIERS INSTALLATION, OPERATION, MAINTENANCE & PARTS NOTE: MANUAL including SPECIFICATIONS, subject to change without notice All ratings specified are based on structural
More informationSouthern Railway Microfilm Lists
Southern Railway Microfilm Lists Description: These are a selection from the Southern Railway Works drawings collection deemed to be of particular interest to researchers and preserved railways. The cards
More informationMODEL NO & UP MODEL NO & UP MODEL NO & UP MODEL NO & UP MODEL NO.
9-0688 MODEL NO. 00-800 & UP MODEL NO. 0-800 & UP MODEL NO. 5-800 & UP MODEL NO. -800 & UP MODEL NO. 0-800 & UP SKID SPRAYER with the Centrifugal Pump FORM NO. 95-9095 SET-UP AND PARTS CATALOG SAFETY AND
More informationSpare Parts List. EW-3500-C and D EW-4200-C and D Marine Diesel Generators
ENTEC WEST, INC. Spare Parts List EW-3500-C and D EW-4200-C and D Marine Diesel Generators Every generator produced by Entec West, Inc. has been recorded in a master computer file by serial number. This
More informationMamod SL1K Locomotive Assembly Instructions
Mamod SL1K Locomotive Assembly Instructions LOCOMOTIVE ASSEMBLY INSTRUCTIONS To ensure ease of construction reference to these instructions are essential. All the major parts are in the front of the box
More informationFORD - Cyl Block and Related Parts
FORD - Cyl Block and Related Parts Ref Description Qty All 302 Qty 351 Qty 351-HP 1 BLOCK ASSEMBLY 1 59-4046 1 59-4047 1 59-4047 2 PLUG - 1½ CUP - BRASS 6 59-4048 6 59-4048 6 59-4048 3 PLUG - OIL PASSAGE
More informationCYLINDER HEAD. Ref. Part No. Number Description Qty Remarks
A1 A2 A3 A4 CYLINDER HEAD 1 3FA-11110-01-00 CYLINDER HEAD ASSY...... 1 2 90116-06541-00. BOLT, STUD............. 2 3 22F-11134-10-00. GUIDE, EXHAUST VALVE... 2 4 93440-10109-00. CIRCLIP.................
More informationParts List. Item # Part # # Reqd. Description
5.2017.6.f 1 3800 Series Injector 1 2 3 4 5 6 7 21 8 9 20 10 11 12 19 18 17 16 15 14 13 Parts List Item # Part # # Reqd. Description 1 A-0664 1 5 Gallon 430 Reservoir 2 A-0575 1 Thumb Screw 3 A-0172 1
More information53 TRUCKLOAD TRAILER PARTS BOOK 2013
53 TRUCKLOAD TRAILER PARTS BOOK 2013 CONTENTS A ABS Warning Light Mounting Bracket...58 Air Brake Chamber Assembly...40 Air Brake Hose Assembly.29 Air Brake Hose Mounting Plate Assembly.38 Air Brake Valve
More informationLocomotive parts April 2018
Locomotive parts April 2018 CONTENTS Page GNR Detail parts 3 LBSC Detail parts 4 GWR Detail parts 5 LMS Detail parts 10 LNER Detail parts 13 GER Details Parts 13 BR castings 14 Tooling & spares 15 2 GNR
More informationCentral Uruguay Railway Locos; Converted to Tanks
The Second World War Period Led to: Considerably more drastic reconstructions or rehabilitations of locomotives, one such is a class of engine upon the Central Uruguay Railway in which the obtaining of
More informationPARTIAL PRODUCT LIST. Carbon Steel Tubes for Boiler & Heat Exchanger: Carbon Steel Pipe for Ordinary Piping: Carbon Steel Pipes for Pressure service:
Carbon Steel Pipe for Ordinary Piping: Carbon Steel Tubes for Boiler & Heat Exchanger: Carbon Steel Pipes for Pressure service: Carbon Steel Pipes for Stucture purposes: Arc welded carbon steel pipes for
More informationP773-2 For Model: M773LW2 PARTS MANUAL. Marine Generators Marine Diesel Engines Land-Based Generators
P773-2 For Model: M773LW2 PARTS MANUAL Marine Generators Marine Diesel Engines Land-Based Generators CALIFORNIA Proposition 65 Warning: Diesel engine exhaust and some of its constituents are known to the
More informationLycoming AIRCRAFT ENGINES. IO-540-AC1A5 Wide Series Flange Crankcase Model Engine PARTS CATALOG PC
AIRCRAFT ENGINES IO-540-ACA5 Wide Series Flange Crankcase Model Engine PARTS CATALOG PC-5- November 008 Lycoming 5 Oliver Street Williamsport, PA 770 U.S.A. 570/33-8 IO-540-ACA5 PARTS CATALOG This illustrated
More informationHP Kawasaki w/ 52" RD Mower Deck (CCWKAV2652RDCE) : 48" & 52" Rear Discharge Mower Deck Group - Discharge Chute [1/19] Page 1 of 38
5900992-26 HP Kawasaki w/ 52" RD Mower Deck (CCWKAV2652RDCE) : 48" & 52" Rear Discharge Mower Deck Group - Discharge Chute [1/19] Page 1 of 38 5900992-26 HP Kawasaki w/ 52" RD Mower Deck (CCWKAV2652RDCE)
More informationShay Engine. Nelson Riedel, 1/14/2003, last updated 06/05/2004. Shay Engine
Shay Engine Nelson Riedel, Nelson@NelsonsLocomotive.com 1/14/2003, last updated 06/05/2004 The following shows the various parts of the engine for the Shay locomotive. Rough Castings: I started with the
More informationBasic Steam Locomotive Action
Basic Steam Locomotive Action The simplest way to understand a steam locomotive is to follow the path towards making it work. A Diesel or gasoline powered engine is called an internal combustion engine.
More informationIntroduction
Introduction WWW.EKPSUPPLIES.CO.UK Tel/Fax: 01598 710892 E-Mail: ekpsupplies@btinternet.com Address: The Old Workshop, Bratton Fleming, Barnstaple, EX31 4SA Introduction Both of these Engines have been
More information36/60/160/260 L Series Gas Ranges
VULCAN L Series Gas Ranges 36/60/160/260 L Series Gas Ranges 34 THRU 41 1 5 51 52 26 42 THRU 49 55-56-57 2-3-4 33 31-32 25 29-30 27 15 PL-53065 14 13 12 28 24 23 22 21 20 19 18 16 17 52 11 10 9 8 7 6 632
More informationGear change & shift cables Gearchange balljoints and bushes. Globes 12 and 24 volt Grilles
A Accessories Air Bags Air compressor assembly and components Air conditioner idler pulleys and condensers Air dryer assemblies and repair kits Air filter elements Air master assembly and repair kits Air
More informationIllustrated Parts Manual. 700 Diesel
ATV Illustrated Parts Manual A R C T I C C A T 700 Diesel Model Number A2007TBT4DUSR (Red) Model Number A2007TBT4DUSG (Green) Model Number A2007TBT4DOSG (Green - International) MORE TO GO ON. TABLE OF
More information700 DIESEL EFT MODEL NUMBER A2008TBT4DETI (RED) MODEL NUMBER A2008TBT4DETM (GREEN) (VADA7D4AV80X VADA7D4AV80X10493) MORE TO GO ON.
2008 700 DIESEL EFT MODEL NUMBER A2008TBT4DETI (RED) MODEL NUMBER A2008TBT4DETM (GREEN) (VADA7D4AV80X10001 - VADA7D4AV80X10493) MORE TO GO ON. TM TABLE OF CONTENTS 2008 ATV 700 Diesel EFT Red (Model No.
More informationFRONT RACK, BODY PANEL, AND HEADLIGHT ASSEMBLIES
FRONT RACK, BODY PANEL, AND HEADLIGHT ASSEMBLIES 0747-506 1 2506-107 1 Rack, Front - Assembly (inc. 2) 2 0411-576 1 Decal, Warning - Load 3 0441-592 4 Bushing 4 8410-835 4 Screw, Cap 5 0423-669 4 Spacer
More informationINSTALLATION, OPERATION, MAINTENANCE & PARTS
OWNER'S MANUAL EXTREME ANGLE CARRIER INSTALLATION, OPERATION, MAINTENANCE & PARTS NOTE: MANUAL including SPECIFICATIONS, subject to change without notice All ratings specified are based on structural factors
More informationCALIFORNIA Proposition 65 Warning:
PARTS MANUAL P1064 For Models: L1064D, L1064A, M1064D, M1064T1, M1064T2, M1064A, M1064H, NL1064D, NL1064T1, NL1064T2, NL1064H1, NL1064H2, M40C2, M55C2, & M65C2 CALIFORNIA Proposition 65 Warning: Diesel
More informationRetriever 5100G/P. 11/89 revised 10/02 FORM NO
Retriever 5100G/P PARTS LIST Advance MODELS 56497000, 56497010 This parts list is for machines after serial number 353005 All models covered in this manual are OBSOLETE 11/89 revised 10/02 FORM NO. 56042216
More informationPRICE LIST ITEM PRICE $ CORE
A/C Clutch $20.00 A/C Compressor $35.00 $10.00 A/C Condenser $25.00 $5.00 A/C Evaporator $15.00 A/C Hose(S) $15.00 Accelerator Cable $10.00 Air Bag $30.00 Air Bag Sensor $10.00 Air Cleaner $15.00 Air Filter
More informationRepair Parts Coulter Applicator Repair Parts
Repair Parts Coulter Applicator Repair Parts,000 Gallon Applicator...,000 Gallon Applicator Frame... Pump Kit...0 Injection Coulter Assembly... Knife Coulter Assembly... Tank Plumbing... Knife and Injection
More informationCYLINDER - CYLINDER HEAD
A1 CYLINDER - CYLINDER HEAD 1 3FA-11110-00-00 CYLINDER HEAD ASSEMBLY. 1 2 95612-06625-00. BOLT, STUD............. 2 3 22F-11134-10-00. GUIDE, EXHAUST VALVE... 2 4 93440-10109-00. CIRCLIP.................
More informationDistrict Sales Offices
Crane Rail Systems sales offices fabrication & distribution facilities headquarters District Sales Offices California 32970 Alvarado Niles Road #736 Union City, CA 94587 P: 510.471.9840 / F: 510.471.9847
More information5/30/2014 F2.5MSH 0407 / TOP COWLING Yamaha Motor Corporation, U.S.A. All rights reserved.
F.5MSH 0407 Page of 40 5/30/04 F.5MSH 0407 / TOP COWLING 04 Yamaha Motor Corporation, U.S.A. All rights reserved. F.5MSH 0407 Page of 40 5/30/04 Part List F.5MSH 0407 / TOP COWLING REF - NO PART NUMBER
More informationSpecification Sheet Doc Rev
Quote Name Name Shop Order Number Sales Administration Use Only Number-001 Serial Number/s Number Date xx/xx/xxxx CUSTOMER Customer Name SALESPERSON Salesperson Name MODEL Super Sander TM, Pneumatic -
More informationGenset. Parts Catalog GHAB. Parts Manual
Genset Parts Manual Parts Catalog To avoid errors or delay in filling your parts order, always give the MODEL, SPEC NO. and SERIAL NO. from the Onan nameplate. For handy reference, insert your nameplate
More informationATV 90 UTILITY CALIFORNIA GREEN (A2008KUB2BCAG) Page 1 of 58 AIR INTAKE ASSEMBLY
2008 ATV 90 UTILITY CALIFORNIA GREEN (A2008KUB2BCAG) Page 1 of 58 AIR INTAKE ASSEMBLY 2008 ATV 90 UTILITY CALIFORNIA GREEN (A2008KUB2BCAG) Page 2 of 58 AIR INTAKE ASSEMBLY Ref # Part Number Qty S/P/F Description
More informationP984 For Models: M984K, ML984, L984, M30C, M984W and M33CW OPERATOR S MANUAL. Marine Generators Marine Diesel Engines Land-Based Generators
P984 For Models: M984K, ML984, L984, M30C, M984W and M33CW OPERATOR S MANUAL Marine Generators Marine Diesel Engines Land-Based Generators CALIFORNIA Proposition 65 Warning: Diesel engine exhaust and some
More informationPARTS BOOK PARTS BOOK CATALOG
PARTS BOOK PARTS BOOK CATALOG BOOM FLEXWING MOWER MOWERS HEADS ROTARY 15 CUT FLAIL DRAWBAR SAW HEAD MOUNT DITCHER DIAMOND MOWERS, LLC 350 E 60 th St. North Sioux Falls, SD 57104 FOR WARRANTY CALL DIAMOND
More informationSpearhead TWIGA. TWIGA Reach Mower 555/600/655T/700T 555FR/600FR. Edition 2.5 June 2014 Part No
TWIGA Reach Mower 555/600/655T/700T 555FR/600FR Edition 2.5 June 2014 Part No. 8999057 0 Contents Ordering Your Parts 3 A Frame 4 Tank 6 Slew Post 8 Lift Frame 10 Tank Lid 12 Rear Panel 13 Stabiliser Brackets
More informationReplacement parts to fit YANMAR CONTENTS. Important Ordering Information
CONTENTS SECTION 1 SECTION 2 SECTION 3 SECTION 4 SECTION 5 SECTION 6 SECTION 7 SECTION 8 SECTION 9 ENGINE...Y-1-1 through Y-1-2 ENGINE SYSTEMS...Y-2-3 through Y-2-5 ELECTRICAL...Y-3-6 through Y-3-7 POWER
More informationSECTION FACILITY FUEL OIL PIPING
PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Specification Sections, apply to this Section. B. Related Sections:
More information2500/2700 Series Gas Convection Oven
MARKET FORGE 2500/2700 Series Gas Convection Oven 2500/2700 Series Gas Convection Oven 2500 2700 2592 2792 Control Panel Assembly 1 99-4209 Control Panel Assembly Complete (Excluding Thermostat) 2 10-6307
More informationESSEX SUPER-SIX PARTS LIST JULY " Car Serial No and Upward 119" Car Serial No and Upward First Motor No
ESSEX SUPER-SIX PARTS LIST JULY 9 " Serial 7 and Upward 9" Serial 0000 and Upward First Motor No 055 HUDSON MOTOR CAR COMPANY DETROIT, MICHIGAN, U. S. A. Printed in U. S. A. ESSEX SUPER-SIX PARTS LIST
More informationFord Brass Saddles Style 101B and 202B
101B Ford Brass Saddles 101B and 202B 101B, 3/4" and 1" Taps 202B, 3/4" through 2" Taps Specifications Body - 85-5-5-5 brass alloy as per ASTM B62, ASTM B584 and AW WA C800. Threads may be FIP, AW WA,
More information400 4x4 Euro MODEL NUMBER A2008IDG4BEUR (RED) MODEL NUMBER A2008IDG4BEUG (GREEN) MODEL NUMBER A2008IDG4BEUZ (CAT GREEN) MORE TO GO ON.
2008 400 4x4 Euro Illustrated Parts Manual MODEL NUMBER A2008IDG4BEUR (RED) MODEL NUMBER A2008IDG4BEUG (GREEN) MODEL NUMBER A2008IDG4BEUZ (CAT GREEN) MORE TO GO ON. TM TABLE OF CONTENTS 2008 ATV 400 4x4
More informationCYLINDER. Ref. Part No. Number Description Qty Remarks
A1 CYLINDER 1 J38-11102-00-00 CYLINDER HEAD ASSEMBLY. 1 2 99510-12016-00 PIN, DOWEL.............. 2 3 95811-08070-00 BOLT, FLANGE............ 3 4 95811-08045-00 BOLT, FLANGE............ 3 5 J38-11181-00-00
More informationEdition October 2014 Part No
Edition 1.3 - October 2014 Part No. 8999076 1 Contents Ordering Your Parts... 3 Centre Section - S180025.70... 5 Wing Section - S180025.71/72...7 Centre Axle - S180025.110... 9 Wing Axle - S180025.111...10
More information#100 TO #199 SPORTSMAN 1600 LIGHT BUGGY TECHNICAL SPECIFICATIONS
#100 TO #199 SPORTSMAN 1600 LIGHT BUGGY TECHNICAL SPECIFICATIONS DEFINITION 1600 Light Buggy is a one-person, limited 4-wheel car using Volkswagen type 1 stock components with a 1585 cc engine. All parts
More informationCYLINDER HEAD. Ref. Part No. Number Description Qty Remarks
A1 A2 A3 A4 CYLINDER HEAD 1 1UY-11110-02-00 CYLINDER HEAD ASSY...... 1 2 3Y1-11133-11-00. GUIDE, INTAKE VALVE..... 2 3 93440-12052-00. CIRCLIP................. 2 4 90401-06001-00. BOLT, UNION............
More informationMooney Mite M-18X Plans and Drawings Index Arranged by Group Miscellaneous Group
Miscellaneous Group 110470 Bushings - Special 314410 Airspeed & Altimeter Installation 110190 Arm - Landing Warning 110070 Button - Static Airspeed 213260 Cone - Wing Fillet 110120 Control - Placard 616100
More informationThe Right Tool for Your Tough Job
SULLAIR air tools The Right Tool for Your Tough Job Applications Tool Sullair Model Class Weight cfm Horizontal and overhead applications Chipping Hammer MCH-2/3/4 15# 16-19 lbs 26-33 Industrial applications
More information