Instruc(on Manual Bath & Shower Support Chair Item No:

Transcription

1 Instruc(on Manual Bath & Shower Support Chair Item No: Distributed by LDI, INC. Batavia, IL Visit us at FTER SLES SUPPORT MODEL:

2 Important Safety Informa.on Bath & Shower Chair ssembly Instruc.ons WRNING: Important! Read and understand these instruc.ons! before assembling or using the Welby Bath & Shower Support Chair. If you do not understand any part of these warnings, cau.ons or instruc.ons, contact a healthcare professional for direc.on in the use of this product. If the bath chair is not properly assembled and adjusted, personal injury and damage to the bath seat could result. WRNING: If any parts are missing or damaged, please do not return to the place of purchase. Contact Fer Sales Support at DO NOT use subs.tute parts. Non- Welby bath chair replacement parts could cause personal injury and damage the bath chair. WRNING: This product has a weight limit of 350 lb. DO NOT EXCEED. WRNING: DO NOT use this product as a transfer bench or climbing device. WRNING: Ensure all bath seat components are secure before each use. This Bath & Shower Chair can be used either with or without the backrest, depending on your needs and comfort level. Contents in Box Item Quan.ty Description 1 Leg Frame (marked as indicated by the arrow) B 1 Leg Frame (marked B as indicated by the arrow) C 1 Seat D 4 djustable Leg Extensions E 1 Backrest F 2 Backrest Frame G 4 Long Screw Knobs H 5 Short Screw Knobs D E F WRNING: LDI Inc. and EuroCentra Inc. assumes no responsibility for any damage or injury caused by improper assembly or use of this product. C G H

3 ssembly Instruc.ons Seat & Frame ssembly: 1. Locate leg frame (), leg frame (B), seat (C) and one of the short screw knobs (H). 4. Fasten legs to seat by inser.ng shortest screw knob through center holes of leg frames and seat and turning screw knob clockwise un.l.ght. 2. Place seat facing down on a flat, dry surface. B Short screw knob (H) 3. Place leg frames in X" paaern over the underside of the seat by matching up the & B on the leg frame with the & B on the underside of the seat as shown below. Leg frame (B) must be under leg frame () (fig. 1) Fig. 1 B B 1x (H) Do not over-.ghten screw knobs.

4 ssembly Instruc.ons Con.nued Installing Leg Extensions: 1. Locate the four leg extensions (D) 2. aach leg extensions by pushing in the height adjustment buaon, inser.ng leg extension onto leg frame, and moving to the desired height posi.on un.l it clicks into place. (fig. 2) 3. Ensure that all leg height adjustment buaons protrude fully through adjustment holes and legs are locked at the same height. (fig. 2) Note: There are numbers next to the adjustment holes to indicate the height. Please be sure all four adjustment buaons are locked at the same number. aaching the Backrest Frame: 1. Place seat facing down on a table. Please note the direc.on of the arrow on underside of the seat. This is to point away from the backrest indica.ng the front of the seat 2. Locate the 4 long screw knobs (G). 3. lign backrest frames (F) to the four seat holes (located under the frame holes) on each corner of seat in the desired posi.on. (fig. 3) Note: The backrest frame can be ver.cally adjusted. See inset below. 4. t this.me, fasten the backrest frame (F) loosely to the seat by inser.ng 1 long screw knob (G) through each of the following: backrest frame hole, leg frame hole, and corner seat hole (fig. 3). Then turn the screw knobs clockwise un.l they are only slightly.ghtened. These will need to be completely.ghtened afer the back rest is aaached. Fig. 2 Fig. 3 F Inset D G

5 ssembly Instruc.ons Con.nued aaching the Backrest: 1. Locate the remaining 4 short screw knobs (H). 2. lign backrest frame holes to backrest (E). (fig.4) 3. Fasten backrest frame to backrest by inser.ng the 4 short screw knobs (H) through each hole and turning screw knobs clockwise un.l.ght. (fig.4) 4. Turn the seat back over again and securely.ghten the backrest frame screw knobs located underneath the seat. ssembly without the Backrest: 1. Locate the 5 short screw knobs (H) 2. Follow the instruc.ons; Seat & Frame ssembly and Installing Leg Extensions, located on pages 3 to 5 of this manual. 3. lign leg frames with the four seat holes on each corner of the seat. (fig.5) 4. Fasten legs to the seat by inser.ng the short screw knobs (H) through the leg frame holes and corner seat holes. Turn the screw knobs clockwise un.l.ght. (fig. 5) 5. Keep the backrest and 4 long screws (G) with this manual for future use. E Fig. 4 Fig. 5 H Do not over-.ghten screw knobs. 7 8

6 !! WRNING: Ensure all components are securely installed and all hardware is.ght before proceeding WRNING: Ensure that the bath seat is assembled as described. If the bath seat is not properly assembled and installed, personal injury and damage to the bath seat could result. Specifica.ons: Maximum Weight Capacity: 350lbs. Overall Width: 20 Overall Depth: 17 Seat Width: 20 Seat Depth: 12 Seat Height Range: 14 to 21 Backrest Height: 9 ll measurements above (+/- ½ ) Do not over-.ghten screw knobs.! Maintenance and Cleaning WRNING: Check the bath seat weekly for signs of damage or cracking. If damage or cracking of any component of the bath seat is found, DO NOT use the bath seat. 1. Inspect the bath seat weekly and.ghten knobs as needed to ensure proper installa.on. 2. To clean the bath seat, wash it with soap and water or a mild detergent, then rinse. Ensure that the bath seat is rinsed well before use. Toll free customer service: EuroCentra, Inc Mon- Fri, 10 am- 6pm ET SVE THESE INSTRUCTIONS

7 LIMITED WRRNTY Thank you for purchasing a top quality Welby product. This Bath & Shower Support Chair was tested and met our stringent quality standards. This product is warranted to be free from manufacturing defects in original materials, including original parts, and workmanship for 2 years with dated proof of purchase. The warranty is void if the defect is due to accidental damage, misuse, abuse, neglect, improper repair or altera(on by unauthorized persons or failure to follow opera(on instruc(ons provided with the product. This warranty does not apply to commercial use. The warranty is non- transferable and applies only to the original purchase and does not extend to subsequent owners of the product. Liability under this warranty is limited to repair or refund at EuroCentra, Inc. discre(on. In no event shall liability exceed the purchase price paid by the purchaser of the product. Under no circumstances shall there be liability for any loss, loss of profits, direct, indirect, incidental, special or consequen(al damage arising out of connec(on with use of this product. This warranty is valid only in the United States. This Warranty gives you specific legal rights. However you may have other rights that vary from state to state. Some states do not allow limita(on on implied warran(es or exclusion of consequen(al damages therefore these restric(ons may not apply to you. Due to constant product development and market changes, EuroCentra, Inc. can only guarantee that spare parts will be available within the two year warranty period. In case you find this product to be defec(ve please contact the \er Sales Service department at the number listed below. EuroCentra, Inc. Toll Free Mon- Fri, 10am- 6pm ET W R R N T Y I N F O R M T I O N Your Details: Name: ddress: Bath and Shower Support Chair" Phone: Date of purchase*: *We recommend you keep the receipt with this warranty card. Location of purchase: Description of malfunction: Return your completed warranty card to: EuroCentra 1 Riverside Rd Suite 204 Riverside, IL FTER SLES SUPPORT MODEL: Phone lines are available Mon-Fri 10am-6pm ET