2.63" (65.9 mm) 0.20" (5.1 mm)

Size: px

Start display at page:

Download "2.63" (65.9 mm) 0.20" (5.1 mm)"

Scot Hart
5 years ago
Views:

Bulletin Screw Connection Terminal Blocks Double-Level Plug-In Style Terminal Blocks Dimensions are not intended to be used for manufacturing purposes.

1 Bulletin Screw Connection Terminal Blocks Double-Level Plug-In Style Terminal Blocks Dimensions are not intended to be used for manufacturing purposes. Note: Height dimension is measured from top of rail to top of terminal block.." (. mm) -JDGP -JDGPTP -JDGPSS." (. mm)." (. mm)." (. mm)." (. mm)." (. mm) Two-circuit block with ground Two-circuit block with test plug socket Single-circuit block with MOV to Specifications connection and ground connection ground Certifications CSA IEC CSA IEC CSA IEC Voltage Rating V AC/DC V AC/DC." (. mm) V AC/DC V AC/DC." (. mm) V AC/DC." (. mm) V AC Maximum Current A A A A A A Wire Range (Rated Cross Section) # # # # # #. mm. mm AWG AWG AWG AWG AWG AWG. mm Wire Strip Length. in. ( mm). in. ( mm). in. ( mm) Recommended Tightening Torque. lb in (. N m). lb in (. N m). lb in (. N m) Density pcs/ft ( pcs/m) pcs/ft ( pcs/m) pcs/ft ( pcs/m) Housing Temperature Range - + F (- + C) - + F (- + C) - + F (- + C) Short-Circuit Current Rating See page - Terminal Blocks Pkg Qty. Pkg Qty. Pkg Qty. Color: Grey -JDGP -JDGPTP -JDGPSS Accessories Pkg Qty. Pkg Qty. Pkg Qty. Mounting Rails: m Symmetrical DIN (Steel) -DR -DR -DR m Symmetrical DIN (Aluminum) -DR -DR -DR m Hi-Rise Sym. DIN (Aluminum) -DR -DR -DR m Angled Hi-Rise Sym. DIN (Steel) -DR -DR -DR End Barriers -EBJDP -EBJDP -EBJDP End Anchors and Retainers: Screwless End Retainer -ERL -ERL -ERL DIN Rail Normal Duty -EAJ -EAJ -EAJ DIN Rail Heavy Duty -EAHJ -EAHJ -EAHJ Jumpers: Screw Center Jumper -Pole -CJJ- -CJJ- Screw Center Jumper -Pole -CJJ- -CJJ- Screw Center Jumper -Pole -CJJ- -CJJ- Screw Center Jumper -Pole -CJJ- -CJJ- Screw Type Jumper Notching Tool -T -T Other Accessories: Partition Plate -PPJDP -PPJDP -PPJDP Test Plug -TP Disconnect Plug -DPL -DPL -DPL Component Plug -CPL -CPL -CPL Fuse Plug Without Blown Fuse Indicator -FPK -FPK -FPK V Blown Fuse Indicator -FPK -FPK -FPK V Blown Fuse Indicator -FPK -FPK -FPK V Blown Fuse Indicator -FPK -FPK -FPK V Blown Fuse Indicator -FPK -FPK -FPK Marking Systems: Snap-in marker cards -SMX (/card) -SMX (/card) -SMX (/card) Snap-in marker cards -MX (/card) -MX (/card) -MX (/card) - Publication A-CAA-EN-P

2 Bulletin Screw Connection Terminal Blocks Short-Circuit Curr ent Ratings Fuse Ratings -J -JP -JDSS -JD -JDC -JGTW -JDGC -JG -JF -JTW -JC -JDC -JKD -JDFB -JDF -JDGFB -JDPSSTP -JDPTP -JDGP -JDGPSS -JDGPSSTP -JDGPTP -JDG -JDPSS -JDP -J -JG -JKD -JTW -JQ -JGTW -JGQ -JKDTW -JKDQ -JKDTP -JDC -JD -JKDQTP -JKDTWTP -JSD -JKD -JCTB -J -JG -J -JG -J -JG -JND -J -JG -J -JG -J -JG -J -JG Wire Range Cu [AWG] Overcurrent Protection Fuse Required Class/Max. Current Rating [A] Maximum Line Load J T RK RK G CC Voltage [V] SCCR, RMS SYM [A],,,,,,, / /, / /, /.../ /.../, / /, - Preferred availability cat. nos. are bold. Publication A-CAA-EN-P

3 Bulletin Screw Connection Terminal Blocks Short-Circuit Current Ratings Overcurrent Ratings Wire Range Cu [AWG] (Line and Load) Overcurrent Protection Device Required Max. Current [A] SCCR, RMS Sym A Y/V SCCR, RMS Sym. A V+ -JTW M-DE-,, -JC M-CE-B,, -JDC M-CE-B,, -JF M-CE-B,, -JDF M-CE-B,, -JKD M-CE-B, -JDFB M-CE-A,, -JDGFB M-CE-C, -JDPSSTP MCE-C, -JDPTP -JDGP -JDGPSS -JDGPSSTP -JDGPTP -JDG -JDP -JDPSS -JKD M-FE-,, -JSD M-DE-C,, -JCTB M-DE-C,, M-DE-C, M-DE-C, M-DE-B,, M-CE-B,, M-CE-B,, M-CE-B,, M-CE-B,, M-CE-B, M-CE-C, M-CE-C, M-CE-A,, -J -JG -J -JG -JND -J -JG -J -JG Wire Range Cu [AWG] (Line and Load) Overcurrent Protection Device Required Max. Current [A] SCCR, RMS Sym A V+ SCCR, RMS Sym. A Y V+ M-HP-,, M-HP-,, M-HP-,, / M-HP-,, Wire Range Cu [AWG] (Line and Load) Overcurrent Protection Device Required Max. Current [A] SCCR, RMS Sym A V+ SCCR, RMS Sym. A V+ -J / U-JX, / U-JX, -J / U-JX,, Bulletin M does not have ratings at this voltage. + Voltage terminal block was tested at for respective SCCR - Preferred availability cat. nos. are bold. Publication A-CAA-EN-P

Bulletin Partition and Separation Plates Partition Plates and Separation Plates Partition plates allow visual and electrical separation of terminal groups and provide the necessary electrical spacing

4 Bulletin Partition and Separation Plates Partition Plates and Separation Plates Partition plates allow visual and electrical separation of terminal groups and provide the necessary electrical spacing between adjacent insulated jumpers or between exposed ends of cut jumpers. Separation plates consist of flexible thermoplastic material and are used between terminal blocks to isolate adjacent center jumpers both visually and electrically. Dimensions Width x Length x Height For Use With Color. x. x. in. ( x x mm). x. x. in. (. x. x. mm). x. x. in. ( x x. mm). x. x. in. (. x x. mm). x. x. in. (. x x mm). x. x. in. (. x x mm). x. x. in. (. x. x. mm). x. x. in. (. x x mm). x. x. in. (. x. x. mm) Partition Plates Pkg Qty. -JD, JDC, JDF, JDDF, JDDR, JDRC, JDSS Grey -PPJD -JDP, JDGP Beige -PPJDP -WM, WM, WMG, WMG Grey -PPM -WMD Grey -PPMD -W, W, WG Grey -PP -W, W, WS, WTW, WG, WGS, WGS Grey -PP -WTF, WTS Beige -PPTS -J, J, J, J, JQ, JTW, JF, JGQ, JG, JGTW, JKD, JKDTP, JP, JPTP, JTC Separation Plates Grey -EBJ Blue -EBJ-B Yellow -EBJ-Y -W, W Beige -SP All -FPK Fuse Plugs Beige -SPJ - Publication A-CAA-EN-P

5 Bulletin Jumpers Side Jumpers For Use With Two-Level Jumper Pkg Qty. -WM, W -N -H, H, H, H -N -SJS -W, WR -SJ- -JD, JDC, JDF, JDG, JDDF, JDDR, JDSS, JDGP -JD, JDC, JDF, JDG, JDDF, JDDR, JDSS, JDGP -JD, JDC, JDF, JDG, JDDF, JDDR, JDSS, JDGP -JD, JDC, JDF, JDG, JDDF, JDDR, JDSS, JDGP -SJA- -SJA- -SJB- -SJB- -WM, W, WTW -SJ- -JTM -SJA- -W -SJ- -JDFB, JDGFB -SJA- -JDFB, JDGFB -SJA- -JDFB, JDGFB -SJA- -LMP, LMPQ, LMJ, LM, LMQ, LMPE, LMPQE -SJLM- -WMD -SJMD- -WFB, WFB, WFB -SJFB- -WM -SJM- -WTF, WTS, WTFLP, WTSLP, WTFLP, WTFLN, WTSLN -WTF, WTS, WTFLP, WTSLP, WTFLP, WTFLN, WTSLN -SJT--R -SJT--B Note: Side jumpers carry the same current rating as the terminal block used with it Side jumper insulating sleeve only for use with -N Use jumper on single side of terminal block only Uninsulated For Use With -LTF (Connects Two Levels within a -LTF Terminal Block) Pkg Qty. -CJLD - Publication A-CAA-EN-P

6 Bulletin General Accessories Photo Description For Use With Pkg Qty. Jumper Notching Tool -CJ -T Unused Pin Cover on Connection Blocks Disconnect Plug Plug-In Component Plug Fuse Plug without Blown Fuse Indication Fuse Plug V Blown Fuse Indication Fuse Plug V Blown Fuse Indication Fuse Plug V Blown Fuse Indication Fuse Plug V Blown Fuse Indication -JC, JDC -PCJC -LP, JP, JDP, JDGP, LDR -LP, JP, JDP, JDGP, LDR -LP, JP, JDP, JDGP, LDR -DPL -CPL -FPK -FPK -FPK -FPK -FPK Mini-Block Jumper Insertion Tool -LM -TAL- DIN Rail Adapter Plate for LMP Mini-Blocks -LMP -MFLM -J -JA -J -JA Auxiliary Circuit Tap -J -JA Terminal Block screwdriver with hardened mm diameter blade (Handle made from recycled material) Wire cutting tool designed to attach directly to the shaft of the -N screwdriver Used to trim poles from center jumpers and side jumpers. Used to install -SJLM- in mini blocks. Use x mm fuses and are rated for AC and DC. All mm wide terminal blocks -N -N -KWC - Preferred availability cat. nos. are bold. Publication A-CAA-EN-P

7 Bulletin Specifications Maximum number of multiple wire connections for copper conductors of the same cross-section and type for Allen-Bradley IEC Terminal Blocks. Cat. Nos. -J and L products are all recommended for one conductor per terminal. Wire range is defined in the cat. page for each of the products. In general, accessories for terminal blocks are not eligible for recognition by UL, CSA, or other third party approval agencies. The suitability of the installation must be judged in the end use application due to the wide variety of possible uses. However, accessories are designed to meet, and are tested to, the terminal block assembly requirements such as electrical spacings, etc. Wire Size [AWG] # # # # # # # # # # # # # # # # / / / Number of the Same Size Wires Per Terminal -CA -CAM -H -H -H -H -HM -J -J -JQ -J -J -JF -JP -JTW (single side) -JTW (twin side) -J -JCTB -JQ -JTW -J -J -J -JC -JD -JDDF -JDDR -JDF -JDFB -JDPSS -JDPSSTP -JDPTP -JDRB*** -JDRC -JDSS -JD -JDC -JDC -JDG -JDGFB -JDGP -JDGPSS -JDGPSSTP -JDGPTP -JDG Publication A-CAA-EN-P -

1.56" (39.5 mm) 0.20" (5.1 mm) Specifications terminal block Certifications CSA IEC CSA IEC CSA IEC 500V AC/DC 300V AC/DC AC/DC

1.56 (39.5 mm) 0.20 (5.1 mm) Specifications terminal block Certifications CSA IEC CSA IEC CSA IEC 500V AC/DC 300V AC/DC AC/DC Plug-In Style Terminal Blocks Dimensions are not intended to be used for manufacturing purposes. Note: Height dimension is measured from top of rail to top of terminal block.." (. mm) -JP -JPTP -JDP."