SPORLAN - THERMOSTATIC EXPANSION VALVES
|
|
|
- Collin Miles
- 5 years ago
- Views:
Transcription
1 SPORLAN - EXPANSION VALVES Selective Thermostat Charges Designed to provide optimum performance for all applications air conditioning heat pump, medium low temperature refrigeration. Thermostatic Element Design Long lasting field proven stainless steel diaphragm welded element construction. Diaphragm Design Large flat diaphragm permits precise valve control. Replaceable Thermostatic Elements Field replaceable elements on all stard valves. Balanced Port Design Provides perfect pin port alignment, prevents changes in pressure drop across the valve from influencing Valve operation. Provides excellent control on applications with widely varying operating conditions. Pin Carrier Design (Conventional Valves) Provides precise pin port alignment, tighter seating. Accessible Internal Parts Durable, leak proof body joint construction allows the valve to be disassembled, the internal parts cleaned inspected. Materials of Construction Pin port material offer maximum protection against corrosion erosion. Silver ed s For leak proof, high strength connection-to-body joints. Adjustable Superheat Design All stard valves are externally adjustable. VALVE NOMENCLATURE/ORDERING INSTRUCTIONS Combine the letters numbers in the following manner to obtain the complete valve designation. Also include all connection s the capillary tube length. CONVENTIONAL VALVES: S V E GA Body Type: FB,F, EF,G, EG, RI,RC, S, EBS*, O*, V**, W** Sporlan Code - - Element Label Color Code F - R-12 Yellow V - R-407A Green E - R-13 - Blue N - R-407 Lt. Brown V - R-22 -Green S - R-408A -Purple G - R-23 - Blue F - R-409A -Yellow M - R124 - Blue R - R Purple J- R134a -Blue W - R Blue X - R-401A Pink P - R Teal L - R-402AS W - R-508B - Blue S- R-404A Orange A - R-717 White Z = R-410A Rose BALANCE PORTED VALVES: E specifies external Omission of letter E indicates valve with internal e.g. EGV-1-C AA Nominal EBF V E - Port Capacity in Tons AAA 1/8 thru 1/3 AA thru 2/3 3/4 thru 1- A 407C (N) 407A (V) B 1-3/4 thru 3 Body Type: BF,SB F, EBF 134a (J) 12 (F) 401A (X) 409A (F) 404A (S) 502 (R) 408A (S) 507 (P) 402A (L) E specifies external Omission of letter E indicates valve with internal 1/4 thru 5- C AAA 1/8 thru 1/5 AA 1/4 thru 1/3 A thru 1 1/4 thru 1- B 3/4 C 2 thru 3 AAA 1/8 thru 1/5 AA 1/4 thru 1/3 A thru 1 B 1-1/4 thru 2 C 2-1/4 thru 3 AAA 1/8 thru 1/5 AA 1/4 thru 1/3 A thru 1 B 1-1/4 thru 2 C 2-1/4 thru 3 Nominal Capacity in Tons - C Thermostatic Charge Thermostatic Charge 3/8 *EBS O valves are balance ported valves, but follow conventional valve nomenclature. **V W valves have dual port semi-balance design. ODF X X 7/8 ODF X X 1/4 ODF 1/4 ODF X 5 Capillary Tubing Length (Inches or Feet) X 30 Capillary Tubing Length (Inches) K-441
2 SPORLAN - EXPANSION VALVES RECOMMENDED ACTUAL APPLICATION A a 401A 402A A 407A 408A 7C FCP60 JCP60 XCP60 FCP60 VCP NCP AIR V CONDITIONING VGA VGA SCP115 RCP115 SCP115 FC JC XC FC COMMERCIAL VC NC VC REFRIGERATION SC RC SC 0 F TO -40 F LC PC PC LOW TEMPERATURE REFRIGERATION 0 F TO -40 F EXTREME LOW TEMP. REFRIGERATION - 40 F TO -100 F AC,AL AC,AL FZ FZ FZP FZP VZ VZ VZP40 VZP40 LZ SZ RZ PZ SZ LZP SZP RZP PZP SZP AZ,AL AZ,AL VX VX LX SX RX PX SX APPLICATION FACTORS 1. The type ZP charges have essentially the same characteristics as the Type Z charge with one exception: they produce a pressure limit Maximum Operating Pressure (MOP). ZP charges are not intended as replacements for Z charges. Each should be selected for its own unique purpose. 2. All A/C Heat pump charges are intended for use with externally equalized valves. 3. Type L liquid charges are also available for most commonly used refrigerants in most element sizes. 4. If in doubt as to which charge to use, contact Sporlan Valve Company, Washington, Missouri with complete system data. 5. The type X charges are not to be used with EBS O valves. IMPORTANT NOTES A. R-134a A/C commercial refrigeration applications are using R-12 or R409A or R-401A valves. B. R-404A commercial refrigeration applications are using R-502 or R-408A valves. C. R-404A R-507 low temperature refrigeration applications are using R-502 or R-402A or R-408A valves. K-442
3 SPORLAN - EXPANSION VALVES QUICK REFERENCE GUIDE AIR CONDITIONING VALVES NOMINAL VALVE TYPE RANGE (Tons) R-22 R-134a R-404A & R-507 CONNECTION TYPES 2 thru 6 VALVE AND APPLICATION Compact adjustable thermostatic expansion valve with an internal check valve to allow reverse flow on heat pump applications. Valve also can be used for refrigerant 410A applications.(2 Ton through 6 Ton) RC valve replaces RI valve. 2 thru 10 2 thru 6 2 thru 7 Brass bar body, externally adjustable valve. has a permanent 12 mesh strainer. General purpose valve for air conditioning refrigeration applications. 8 & 11 5 & 7 6 & 7- ODF Same physical size as the Type S valve except it features extended ODF connections a balanced port construction. 15 thru 70 9 thru 40 9 thru 45 Brass bar body, externally adjustable valve. has a permanent 12 mesh strainer. General purpose valve for air conditioning refrigeration applications. 52thru10 35 thru thru 70 or FPT Flange Cast bronze body, externally adjustable valve with flange connections. has a 12 mesh strainer. This valve type features a dual port semi-balanced design. This valve type provides valve capacities greater than the Type M, is suitable for air conditioning refrigeration applications. Flanges for the Type V are interchangeable with the Type M. 135 & & 110 Flange * R-22 M Valves with GA & CP 100 Thermostatic chargers are also available. Cast bronze body, externally adjustable valve with flange connections. has a 12 mesh strainer. This valve type features a dual port semi-balanced design it is primarily for large capacity chillers. This valve type provides the largest valve capacities available for flange connection TEVs. K-443
4 SPORLAN - EXPANSION VALVES Type-S ELEMENT SIZE No. 83, Knife Edge Joint. Stard Tubing Length - 5 Feet. Type-EBS SVE-2 SVE-3 SVE-4 SVE-5 SVE-8 SVE-10 (in. ) Balanced Port Construction ELEMENT SIZE No. 83, Knife Edge Joint, Stard Tubing Length - 5 Feet Type-O EBSVE-8 EBSVE-11 7/8 CONNECTION S (in. ODF ) Balanced Port Construction ELEMENT SIZE No , Knife Edge Joint, Stard Tubing Length - 5 Feet (Sporlan Code) OVE-15 OVE-20 OVE-30 OVE-40 OVE-55 OVE-70 Element Number /8 (in. ODF 7/8 1-1/8 1-1/8 1-3/8 K-444 Type-RC With internal check valve. R-22 ELEMENT SIZE No. 43, Knife Edge Joint, Stard Tubing Length - 30 R-410A ELEMENT SIZE No. 45, Knife Edge Joint, Stard Tubing Length A (Z) Type-W Inches RCVE-2 3/8 RCVE-3 RCVE-4 2 RCVE-5 GA RCVE-6 RCZE-2 RCZE-3 3/8 RCZE-4 RCZE-5 RCZE-6 ELEMENT SIZE No. 63, Gasket Joint, Stard Tubing Length - 5 Feet Flange Ring 1-3/4 OD x 1- ID. Type-V WVE-135 WVE-180 ELEMENT SIZE NUMBER 63 CP G only ELEMENT SIZE No. 63, Gasket Joint, Stard Tubing Length - 5 Feet Flange Ring 1-3/4 OD x 1- ID. VVE-52 VVE-70 VVE-100 Inches 1-2-1/8 Inches 1-3/8 1-3/8 TEV REPLACEMENT ELEMENTS Item Descriptions KT-43-VGA 30 KT-43-V 30 KT-33-VGA 60 KT-33-V 60 KT-53-VGA 60 KT-53-V 60 KT-83-VGA 60 KT-83-V 60 KT-63-VGA 10 KT-63-V 10
5 SPORLAN - EXPANSION VALVES EXPANSION VALVE CAPACITIES FOR S (Tons of ) AIR CONDITIONING AND HEAT PUMP APPLICATIONS VALVE TYPES NOMINAL K A RECOMMENDED V, VGA EVAPORATOR TEMPERATURE ( F) N, ZGA RC RC RC RC RC EBS EBS O O O O O O S S S S S S S V V V W W LIQUID TEMPERATURE ENTERING TEV ( F) CORRECTION FACTOR, CF LIQUID TEMPERATURE A These factors include corrections for liquid refrigerant density net refrigerating effect are based on an evaporator temperature of 40 F. PRESSURE DROP ACROSS TEV (PSI) CORRECTION FACTOR, CF PRESSURE DROP 40 F EVAPORATOR TEMPERATURE A TEV = TEV RATING X CF LIQUID TEMPERATURE X CF PRESSURE DROP Example: Calculate the actual capacity of a nominal 2 ton, R-22, Type RC valve at 40 F evaporator, 80 F liquid temperature entering the TEV, 75 psi pressure drop across the TEV: TEV capacity = 2.30 (from rating chart) x 1.12 (CF liquid temperature) x 0.87 (CF pressure drop) = 2.24 tons
6 SPORLAN - EXPANSION VALVE PART NUMBERS TYPE R410A Expansion Valves Type S Series Valves SVE-10-GAX7/8ODF SVE-15-GA7/8X1-1/8ODF SVE-2-GA/ODF SVE-3-GAXODF SVE-4-GAX7/8ODF SVE-5-GAX7/8ODF SVE-8-GAX7/8ODF SVE10X7/8ODF SVE157/8X11/8OD SVE2-XOD SVE3-XOD SVE4-X7/8OD SVE5-X7/8OD SVE8X7/8ODF Type RC Series Valves RCVE-2-GA3/8XODF RCVE-3-GA3/8XODF RCVE-4-GAXODF RCVE-4-GAXODF RCVE-5-GAXODF RCVE-5-GAXODF RCVE-6-GAXODF RCVE-6-GAXODF RCZE-2-GA3/8XODF RCZE-3-GA3/8XODF RCZE-4-GAXODF RCZE-5-GAXODF RCZE-6-GAXODF SVE-10-GA X7/8 ODF SVE-15-7/8X1-1/8 ODF SVE-2-GA X ODF SVE-3-GA X ODF SVE-4-GA X7/8 ODF SVE-5-GA X7/8 ODF SVE-8-GA X7/8 ODF SVE-10- X7/8 ODF SVE-15-7/8X1-1/8 ODF SVE-2- X ODF SVE-3- X ODF SVE-4- X ODF SVE-5- X ODF SVE-8- X7/8 ODF RCVE-2-GA 3/8X ODF RCVE-3-GA 3/8X ODF RCVE-4-GA X ODF RCVE-4-GA X ODF RCVE-5-GA X ODF RCVE-5-GA X ODF RCVE-6-GA X ODF RCVE-6-GA X ODF RCZE-2-GA 3/8X ODF RCZE-3-GA 3/8X ODF RCZE-4-GA X ODF RCZE-5-GA X ODF RCZE-6-GA X ODF Type EBS Series Valves EBSVE-11-GAX7/8OD EBSVE-8-X7/8 EBSVE-8-GAX7/8ODF RCZE-2-GA3/8XODF 2 ton TXV VALVE,R-410A EBSVE11X7/8O RCZE-3-GA3/8XODF 3 ton TXV VALVE,R-410A RCZE-3-N3/8XODF 3 ton TXV VALVE,R-410A A 3 ton TXV ERZE-3-GA 3x4 ODF RCZE-4-GAXODF 4 ton TXV VALVE,R-410A OVE-20-GA7/8X7/8ODF A 4 ton TXV ERZE-4-GA 3x4 ODF OVE157/8X11/8O RCZE-5-GA4X5ODF 5 ton TXV VALVE,R-410A OVE15GA7/8X1-1/8ODF A 5 ton TXV ERZE-5-GA 3x4 ODF OVE207/8X1-3/8OD A 6 ton TXV RCZE-6-GA X ODF OVE20GA7/8X1-1/8ODF A 6 ton TXV ERZE-6-GA 3x4 ODF OVE301-1/8X1-3/8O A 8 ton TXV RZE-8-GA 5X7ODF OVE30GA1-1/8X1-3/8OD A 12.5 ton TXV RZE-12.5-GA 7X9ODF OVE4011/8X13/8O A 15 ton TXV RZE-15-GA 7X9ODF OVE4011/8X1O OZE-20-GA 20 ton TXV OZE-20-GA 7X9 ODF OVE40GA1-1/8X1-3/8OD A 25 ton TXV OZE-25-GA 7X9ODF OVE40GA1-1/8X1-OD OZE-35-GA 35 ton TXV OZE-35-GA 9X11 ODF OVE5511/8X13/8O A 50 ton TXV OZE-50-GA 9X11 ODF OVE5511/8X1O A 60 ton TXV OZE-60-GA 9X11 ODF OVE55GA1-1/8X1-3/8OD KT-45-ZGA KT-45-ZGA POWER ELEMENT for R valve ton OVE55GA1-1/8X1-OD KT-45-5-ZGA KT-45-5-ZGA POWER ELEMENT for R valve 2-8 ton OVE7011/8X13/8O KT-85-ZGA KT-85-ZGA POWER ELEMENT for O valve ton OVE7011/8X1O KT-85-3-ZGA KT-85-3-ZGA POWER ELEMENT for O valve ton OVE70GA1-1/8X1-3/8OD OVE70GA1-1/8X1-OD Type O Series Valves Type V Series Valves VVE-100-GA13/8X13/8 VVE-52-GA13/8X138OD VVE-70-GA13/8X13/8OD VVE10013/8X13/8 VVE5213/8X13/8 VVE7013/8X13/8O Type W Series Valves WVE-135-GA1X21/8 WVE1351X21/8 EBSVE-11-GA X7/8 ODF EBSVE-8-C100 X7/8 ODF EBSVE-8-GA X7/8 ODF EBSVE-11- X7/8 ODF TXV, VALVE 7/8X7/8 ODF OVE-15-7/8X1-1/8 ODF OVE-15-GA 7/8X1-1/8 ODF OVE-20-7/8X1-3/8 ODF OVE-20-GA 7/8X1-1/8 ODF OVE /8X1-3/8 ODF OVE-30-GA 1-1/8X1-3/8 ODF OVE /8X1-3/8 ODF OVE /8X1- ODF OVE-40-GA 1-1/8X1-3/8 ODF OVE-40-GA 1-1/8X1- ODF OVE /8X1-3/8 ODF OVE /8X1- O OVE-55-GA 1-1/8X1-3/8 ODF OVE-55-GA 1-1/8X1- ODF OVE /8X1-3/8 ODF OVE /8X1- ODF OVE-70-GA 1-1/8X1-3/8 ODF OVE-70-GA 1-1/8X1- ODF VVE-100-GA 1-3/8X1-3/8 ODF VVE-52-GA 1-3/8X1-3/8 ODF VVE-70-GA 1-3/8X1-3/8 ODF VVE /8X1-3/8 ODF VVE /8X1-3/8 ODF VVE /8X1-3/8 ODF WVE-135GA 1-X2-1/8 ODF WVE X2-1/8 ODF K-446
Thermostatic and Automatic Expansion Valves
aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding Thermostatic and Automatic Expansion Valves Catalog E-1, July 2012
Sporlan Type R Valves Thermostatic Expansion Valves
Sporlan R s Thermostatic Expansion s RACE Catalogue 10-10-8 TEV-2/UK, March 2012 2 RACE Catalogue 10-10-8 TEV-2/UK - 03/2012 TABLE OF CONTENTS Materials and Details of Construction....................................................
Condensed Catalog 410A January 2008
CATALOG Page 1 Condensed Catalog January 2008 This condensed catalog contains product specifically for R- applications. By including a minimum of engineering information we are able to provide a concise
Parker TEV Model Visual
PARKER - THERMOSTATIC EXPANSION VALVES TXV MODEL NUMER SELECTION Parker TEV Model Visual N Series TEV C(E) Series TEV SC(E) Series TEV Applications: Applications: Applications: Low Profile Coolers, Rail
NOTE: If the HF body is stamped HFK, then the cage is replaceable. HF N E S C B 2 H C 5 FT 3/8 x 1/2 ODF S/T. Capacity Nominal Rating in Tons
The HF series is a balanced ported valve designed for refrigeration, air conditioning and heat pump applications. Features Stainless steel replaceable power element eliminates corrosion and prevents valve
Sporlan Thermostatic Expansion Valves
aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding Splan Thermostatic Expansion Valves ulletin 10-10, October 2009 t THERMOSTTI
THERMOSTATIC EXPANSION VALVES
PARKER TXV MODEL NUMBER SELECTION S MODEL E EXTERNAL EQUALIZER OPTIONAL 5 V X CHARGE TYPE 00 M.O.P. B BLEED OPTIONAL 0 BLEED S EG (C) C = Internal Check Valve (E) for externally equalized evaporator pressure
Sporlan Thermostatic Expansion Valves
aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding Splan Thermostatic Expansion Valves RE atalogue 10-10 UK, pril 2010
Parker TEV Model Visual
PARKER - THERMOSTATIC EXPANSION VALVES TXV MODEL NUMBER SELECTION Parker TEV Model Visual N Series TEV C(E) Series TEV SC(E) Series TEV Applications: Applications: Applications: Low Profile Coolers, Rail
THERMOSTATIC EXPANSION VALVE QUICK SELECT
THERMOSTATIC EXPANSION VALVE QUICK SELECT ALCO THERMO EXPANSION VALVE QUICK SELECT GUIDE: APPLICA- TION AIR CONDITIONING AND REFRIGERATION CONSTANT PRESSURE ELECTRICALLY DRIVEN ULTRA-LOW TEMP DE-SUPERHEATING
DANFOSS. Thermostatic Expansion Valves. Nominal Capacity Ranges in TR for Range N -40 to 50 F R-12 R-22 R-410A R-134A R-404A/
TYPE TUA(E), TUB(E), TUC(E), T(E)2, TDE, TDEB, TE, TXI 2, AKV Thermostatic Expansion Valves Valve Applications Features Models Nominal Capacity Ranges in TR for Range N -40 to 50 F R-12 R-22 R-410A R-134A
HFK. Balanced Port Thermo Expansion Valve Kits. Save Inventory $ and Valuable Truck Stock Space
HFK Balanced Port Thermo Expansion Valve Kits Save Inventory $ and Valuable Truck Stock Space Features and Benefits Features of the high performance HF valve now available with interchangeable valve bodies,
THERMOSTATIC EXPANSION VALVES
S - Series THERMOSTATI EXPANSION VALVES 7.0 Sporlan - R22 SVE2---- 1/2 x 5/8 SVE3---- 10.5 $282.63 SVE4---- 14.1 $282.63 1/2 x 7/8 SVE5---- 17.6 83 1/4 $282.63 P100 SVE8---- 28.1 $282.63 SVE10---- 35.2
QUICK SELEC. Economy Performance, Hermetic AA 1/2 thru 5 Economy Performance, Non-Adjustable AN 1/2 thru 5
THERMO EXP XPANSION ALVE QUICK SELEC ELECT GUIDE UIDE: : 1/4 : 1/4 TO 20 T 20 TONS NOMINAL CAPACITY APPLICATION FEATURE MODEL R-22 () PAGE Interchangeable Cages, Flexibility TI 1/3 thru 5 53 SUPERMARKET
Automatic controls catalogue E.N. 4
TV series Technical parameter Max. body temperature: 80 Max. bulb sensing temperature: 60 About R134a,R22,R407C,R404A/R507 system: Max. working pressure: 3 MPa Max. testing pressure: 3.3 MPa About R410A
Thermostatic Expansion
Thermostatic Expansion Valves Thermostatic Expansion Valves TC Series Application TC thermostatic expansion valves are used to adjust the supply of refrigerant in evaporator by controlling the superheat.
Thermostatic expansion valves type TGE 10, TGE 20 and TGE 40
MAKING MODERN LIVING POSSIBLE Technical brochure Thermostatic expansion valves TGE 0, TGE 20 and TGE 40 TGE is a dedicated designed series of thermostatic expansion valves for all standard refrigerants.
Thermostatic expansion valves type TGE 10, TGE 20 and TGE 40
MAKING MODERN LIVING POSSIBLE Technical brochure Thermostatic expansion valves TGE 0, TGE 20 and TGE 40 TGE is a dedicated designed series of thermostatic expansion valves for all standard refrigerants.
Thermostatic expansion valves Type TGE 10, TGE 20 and TGE 40
MAKING MODERN LIVING POSSIBLE Data sheet Thermostatic expansion valves Type TGE 10, TGE 20 and TGE 40 TGE is a dedicated designed series of thermostatic expansion valves for all standard refrigerants including
Thermo -Expansion Valves Series TX7
Technical Bulletin TX7 series of Thermo -Expansion Valves are designed predominantly for AC, heat pumps, close control and industrial process cooling applications. The TX7 is ideal for those applications
General Purpose Catalog Valves, Controls and System Protectors
General Purpose Catalog Valves, Controls and System Protectors January 2016 EmersonClimate.com/flowcontrols Customer Service St. Louis, MO (314) 569-4500 Emerson, Copeland, and Copeland Scroll are trademarks
t EVAPORATOR PRESSURE REGULATING VALVES
CATALOG 201 Page 63 t EVAPORATOR PRESSURE REGULATING VALVES (S)ORIT-12, -15 and -20 Features n High side pilot for improved temperature control and low P operation n Adjustable n Optional solenoid stop
Wholesale Catalog Emerson Valves, Controls and System Protectors. Wholesale Catalog Valves, Controls and System Protectors 2015
Wholesale Catalog Emerson, and Wholesale Catalog, and 2015 Table of Contents Expansion 1-40 41-61 EX & 62-75 EX 76-98 Solenoid & Coils 99-117 Solenoid 118-120 121-136 137-138 139-174 175-181 182-192 Pressure
TAKE-A-PART SHELLS TOTALINE LIQUID & SUCTION LINE REPLACEABLE SHELLS P505-8 SERIES PART NUMBER SIGNIFICANCE
TOTALINE LIQUID & SUCTION LINE REPLACEABLE SHELLS P505-8 SERIES P PART NUMBER SIGNIFICANCE P360 SIZE (in 1/8 ) 505-8 TOTALINE FILTER DRIER SHELLS APPLICATION Totaline Replaceable Core Shells offer the
PHconnect. Trade Price Schedule
PHconnect What is PHconnect? PHconnect is Parker s on-line resource for its U.S.A. refrigeration and air conditioning wholesalers. PHconnect enables wholesalers to do the following via the internet: enter
Technical leaflet Thermostatic expansion valves with fixed orifice
MAKING MODERN LIVING POSSIBLE Technical leaflet Thermostatic expansion valves with fixed orifice Type TDE / TDEB www.danfoss.com Contents Page Introduction........................................................................................3
TI Series - Thermo -Expansion Valves
EMERSON TI series of Thermo -Expansion Valves with interchangeable orifices are designed for refrigeration applications such as display cases in supermarkets, walk-in/reach-in coolers, freezers, soft ice
Thermostatic Expansion
Thermostatic Expansion Valves Thermostatic Expansion Valves TCCE Series Application TCCE thermostatic expansion valve is used to regulate refrigerant flow into the evaporator, especially in applications
Thermostatic expansion valves PHT
MAKING MODERN LIVING POSSIBLE Technical brochure Thermostatic expansion valves PHT www.danfoss.com Contents Page Introduction........................................................................................
EMERSON CLIMATE TECHNOLOGIES
STAS STEEL TAKE-APART FILTER DRIER APPLICATION Replaceable core filter-drier for CFC, HCFC and HFC refrigerants for use in large commercial air conditioning and refrigeration systems. FEATURES Unique internal
Stainless steel - the strong solution
MAKING MODERN LIVING POSSIBLE Stainless steel - the strong solution TU and TC thermostatic expansion valves REFRIGERATION & AIR CONDITIONING DIVISION TU / TC: superior by design and function The function
Refrigeration K-211. Replacement Parts. Chillers, Condensers. Compressors, Motors. Electrical. Components. Heating. Indoor Air Quality.
EMERSON CLIMATE TECHNOLOGIES-Oil Controls High Efficiency Centrifugal Oil Separator The High Efficiency Centrifugal Oil Separator is used in ultra-low temperature systems with long refrigerant lines or
MAKING MODERN LIVING POSSIBLE. Solenoid valves Type EVU for fluorinated refrigerants REFRIGERATION AND AIR CONDITIONING.
MAKING MODERN LIVING POSSIBLE Solenoid valves EVU for fluorinated refrigerants REFRIGERATION AND AIR CONDITIONING Technical leaflet Contents Page Introduction... 3 Features... 3 Approvals... 3 Technical
Expansion valves - 2 of 2
Expansion valves - 2 of 2 Contents Page Thermostatic expansion valves, type T 2 and TE 2 Introduction... 3 Features... 3 Technical data... 3 Superheat... 3 Ordering: Components with flare flare connection...
KEP. Extended Profile Evaporator CONTENTS PRODUCT DATA & INSTALLATION
PRODUCT DATA & INSTALLATION Bulletin K30-KEP-PDI-2 Part # 1104191 PRODUCT SUPPORT web: k-rp.com/kep email: evaps@k-rp.com call: 1-844-893-3222 x520 scan: KEP Extended Profile Evaporator Air, Electric,
DEMA 651AG SINGLE-FEED INSTALLATION INSTRUCTIONS
I. PARTS: A. Dispenser assembly B. 1 pc. 9/16 in. I.D. X 6 ft. vinyl outlet tubing (4 GPM proportioner only). C. 1 pc. 3/8 in. O.D. X 8 ft. vinyl supply tubing, foot valve & ceramic weight. D. 4 pc. #10
TMP. Medium Profile Evaporator CONTENTS PRODUCT DATA & INSTALLATION
PRODUCT DATA & INSTALLATION Bulletin T30--PDI-12 Part # 1082852 PRODUCT SUPPORT web: t-rp.com/tmp email: evaps@t-rp.com call: 1-844-893-3222 x520 scan: Medium Profile Evaporator Air, Electric, Hot Gas
Hot gas bypass regulator type CPCE Liquid gas mixer type LG (accessory)
MAKING MODERN LIVING POSSIBLE Data sheet Hot gas bypass regulator type CPCE Liquid gas mixer type LG (accessory) A CPCE hot gas bypass regulator is used to adapt compressor capacity to actual evaporator
DEMA MODELS P203CTC.PI.1,.2,.3 INSTALLATION INSTRUCTIONS
I. PARTS: A. 1 pc. Cyclone Portable Injector B. 1 pc. Foot Strainer & 1/4" I.D. Tubing. C. 1 pc. Ceramic Weight. D. 1 pc. Instruction Sheet D. 2 pc. 3 hose w/ female x female GHT fittings on both ends
April 2004 / BULLETIN for Supermarket Systems DDR-20 OLDR-15
April 2004 / BULLETIN 90-50 for Supermarket Systems DDR-20 OLDR-15 Page 2 / Bulletin 90-50 SPORLAN DEFROST DIFFERENTIAL PRESSURE REGULATING VALVES OFFER THESE BENEFITS: Able to maintain a differential
Electric expansion valve Type ETS ETS 400
Data sheet Electric expansion valve Type ETS 12.5 - ETS 400 ETS is a series of electric expansion valves for precise liquid injection in evaporators for air conditioning and refrigeration applications.
Shell-and-tube dry expansion evaporators Alfa Laval DH
Alfa Laval in brief Alfa Laval is a leading global provider of specialized products and engineered solutions. Our equipment, systems and services are dedicated to helping customers to optimize the performance
Electric expansion valve Type ETS ETS 400
MAKING MODERN LIVING POSSIBLE Data sheet Electric expansion valve Type ETS 12.5 - ETS 400 ETS is a series of electric expansion valves for precise liquid injection in evaporators for air conditioning and
Crankcase Pressure Regulating Valves
Crankcase Regulating Valves Crankcase Regulating Valves are designed to prevent overloading of the compressor motor by limiting the crankcase pressure to a predetermined maximum value during and after
R-22 R-404A/R-502/R-507A R-12/
EMERSON CLIMATE TECHNOLOGIES-System Protectors Recommended System Tonnage Take-Apart Liquid Line Filter Driers in Tons* Description, Low Temp. & Commercial Installations Air Conditioning Field Replacement
UARDIAN TECHNICAL GUIDE MODELS: GCGD18 THRU 60
TECHNICAL GUIDE GUARDIAN SERIES DRY SHIP AIR CONDITIONER CONDENSING UNITS SHIPPED WITH NITROGEN CHARGE ONLY 13 SEER R-22 1 PHASE 1.5 THRU 5 NOMINAL TONS MODELS: GCGD18 THRU 60 UARDIAN Due to continuous
Solenoid valve Types EVR 2 EVR 40 NC/NO
MAKING MODERN LIVING POSSIBLE Data sheet Solenoid valve s EVR 2 EVR 40 NC/NO EVR is a direct or servo operated solenoid valve for liquid, suction, and hot gas lines with fluorinated refrigerants. EVR valves
Valve Station in stainless steel ICF SS 20 and ICF SS 25
Data sheet Valve Station in stainless steel ICF SS 20 and ICF SS 25 Based on advanced technology the ICF SS valve station incorporates several functions in one housing, which can replace a series of conventional
1. Air Handler Features Page Physical data Page Available kits Page Model nomenclature Page 5
TABLE OF CONTENTS 1. Air Handler Features Page 2 2. Physical data Page 3 3. Available kits Page 4 4. Model nomenclature Page 5 5. Air handler blower performance Page 6 6. heating capacity Page 12 7. Maximum
Solenoid valves Type EVR 2 40 NC/ NO REFRIGERATION AND AIR CONDITIONING. Technical leaflet
Solenoid valves EVR 2 40 NC/ NO REFRIGERATION AND AIR CONDITIONING Technical leaflet 2 DKRCCPDBB0A202-520H275 Danfoss A/S, 0-2006 Contents Page Introduction.......................................................................................
Millennium TM. 100 thru 675 Tons (315 thru 2375 kw) renewal parts. Supersedes: RP1 (1099) Form RP1 (710) R-22 and R-134a 00202VIP
Millennium TM Rotary Screw Liquid Chillers renewal parts Supersedes: 160.80-RP1 (1099) Form 160.80-RP1 (710) Model YS BA CB S0 thru YS FA FB S5 (Style E) 100 thru 675 Tons (315 thru 2375 kw) 00202VIP R-22
DEMA MODEL 603T-WI INSTALLATION INSTRUCTIONS
DEMA MODEL 603T-WI I. PARTS: A. Select-O-Matic Assembly B. 2 Pcs. Foot Strainers & 1/4" ID Tubing C. 4 Pcs. Mounting Screws & Anchors D. 1 Pc. 100-15K Metering Tip Kit (603T Only) E. 1 Pc. Backflow Preventer
DEMA SPRAY STATION II MODEL 606T-2 INSTALLATION INSTRUCTIONS
The 0T-2 Spray Station II Dispensers are used in any application where a chemical product must be sprayed or foamed without the use of compressed air or a high pressure pump. City water pressure and optional
Pounds Per Square Inch (PSI)
Nozzle Size Selection Chart Determine the nozzle size by the pressure washer s GPM @ PSI (gallons per minute @ a specific pounds per square inch). If the nozzle size is too small, your equipment can be
Thermostatic Expansion Valve
STANDARD Thermostatic Expansion Valve RFGD series thermostatic expansion valves are used to adjust mass flow of refrigerant into the evaporator while controlling the refrigerant s superheat at the outlet
Spray Clean 606T-2 Installation Instruction
Spray Clean 606T-2 Installation Instruction Overview The 606T-2 unit is designed to be used as a spray or foam unit where up to two chemicals can be attached to the unit along with a clean water rinse.
DEMA SPRAY CLEAN DISPENSERS MODEL 605T INSTALLATION INSTRUCTION
The 605T Spray Clean Dispenser is used in any application where a chemical product must be sprayed or foamed without the use of compressed air or a high pressure pump. City water pressure and optional
i Series Model SV Water Source Heat Pump 1/2 to 6 Ton
i Series Model SV Water Source Heat Pump 1/2 to 6 Ton Engineering Submittal Sheet Overview and Certifications Standard Features, Factory Installed Options, and Field Installed Accessories Standard Features
REFRIGERATION STRAINERS
REFRIGERATION STRAINERS AC & R OIL FILTER - POE OIL FILTER-DRIER S-4004 AC&R Components S-4004 Oil Filter removes foreign material from the oil as it passes through the filter. The filter easily captures
Subcritical CO 2 Innovations
March 2011 / CATALOG 744 Subcritical CO 2 Innovations Energy Conscious Products & Solutions for Supermarkets Subcritical CO 2 Innovations Energy Conscious Products & Solutions for Supermarkets CATALOG
DEMA 652 DUO-FEED INSTALLATION INSTRUCTIONS
I. PARTS: A. Dispenser assembly B. 1 pc. ½ in I.D. X 6 ft. vinyl outlet tubing C. 1 pc. 9/16 in. I.D. X 6 ft. vinyl outlet tubing. D. 2 pc. 3/8 in. O.D. X 8 ft. vinyl supply tubing, foot valve & ceramic
DEMA MODEL 606T-WI INSTALLATION INSTRUCTIONS
DEMA MODEL 606T-WI INSTALLATION INSTRUCTIONS I. PARTS: A. Select-O-Spray Assembly B. 2 Pcs. Foot Strainers & 1/4" ID Tubing C. 4 Pcs. Mounting Screws & Anchors D. 1 Pc. 100-15K Metering Tip Kit E. 1 Pc.
DUCT type. SPLIT TYPE AIR CONDITIONER (50Hz) Models Indoor unit Outdoor unit C O N T E N T S
SPLIT TYPE AIR CONDITIONER (50Hz) DUCT type Models Indoor unit Outdoor unit RD-90EB RO-90EPB C O N T E N T S SPECIFICATIONS... OUTLINE AND DIMENSIONS... CIRCUIT DIAGRAM...5 REFRIGERANT SYSTEM DIAGRAM...6
Product Data. CC5A, CD5A Heating/Cooling Coil. Sizes A018 thru W060 COMMON FEATURES
Product Data CC5A, CD5A Heating/Cooling Coil Sizes A018 thru W060 The CC5A and CD5A evaporator coils incorporate proven standards for reliable system operation and performance throughout the life of a
DEMA SPRAY CLEAN MODELS: 241CDF & 241CDFT INSTALLATION INSTRUCTIONS
1. PARTS A. Bottle holder and injector assembly. B. Spray gun (Model 40-8B). C. 4 mounting screws in envelope. 2. INSTALLATION Mount the bottle holder on wall using the 4 screws provided through the plates
INSTALLATION INSTRUCTIONS DEMA BLEND CENTER MODEL B-GAP, T-GAP
1. PARTS: ITEM DESCRIPTION QTY. A. Blend Center Assembly 1 B. ¼ ID X 8 Long Vinyl Supply Tubing & Foot Valve Assembly 1 C. Ceramic Weight 1 D. ½ ID X 6 Long Vinyl Outlet Tubing (For 4 GPM Station Only)
WEIGHT (lb) PART NO WITH ACCESS CONNECTION (ODS) BALL PORT DIAMETER WA WAS
SUPERIOR - BALL VALVES WA SERIES (WELDED) WAS Series (Welded with Access Fittings) Full Service Temperature Range of -40 F to +325 F. Forged Brass Body and Seal Cap. Design Working Pressure: 700 psig.
i Series Model SV Water Source Heat Pump 1/2 to 6 Ton
i Series Model SV Water Source Heat Pump 1/2 to 6 Ton Engineering Submittal Sheet Overview and Certifications Standard Features, Factory Installed Options, and Field Installed Accessories Standard Features
5022 SD - 1/2" Impact Sprinkler
Impact Sprinklers 5022 SD - 1/2" Impact Sprinkler Full Circle Impact- 25 trajectory 1/2" Male N.P.T. Single and Dual Bayonet s Plastic Bearing Plastic head and lever for strength, durability, and consistent
Pulse Width Modulation Valves. Models SPW-0 thru -7
November 2017 Bulletin / Bulletin 30-30 30-30 Page 1 Pulse Width Modulation s Models SPW-0 thru -7 Page 2 Bulletin 30-30 Pulse Width Modulation s For Refrigerant Flow Control in Direct Expansion HFC, HCFC
Air Operated Valve Control Valve
Air Operated Valve Control Valve -1 Step 0 Type/Structure/Features Please refer to this for structure and feature of Air Operated Valve and Control Valve. Step 1 Selection Please look at the ID chart to
Large Profile Unit Coolers
CH-LUCTB AUGUST 2018 Replaces CH-LUCTB MARCH 2018 Large Profile Unit Coolers Technical Guide s HHA HHE/HHL HHG/HHF Table of Contents Nomenclature... 2 Features & Benefits... 3 Performance Data & Specifications...
HE Series Evaporator Coils
SG-HE-02 March 20 Specification Guide HE Series Evaporator Coils Contents... Page HE Series A-Coils Features... 2 Nomenclature... 3 Specifications... 4 Pallet Quantities... 12 Product improvement is a
HE Series Evaporator Coils
SG-HE-01 February 2017 Specification Guide HE Series Evaporator Coils Contents... Page HE Series A-Coils Features... 2 Nomenclature... 3 Specifications... 4 Pallet Quantities... 12 Product improvement
!ATTENTION! CAUTION!! WARNING! DANGER!
www. bitzerus.com 1 ATTENTION: ALL WORK ON COMPRESSOR AND REFRIGERATION SYSTEMS MUST BE CARRIED OUT BY TRAINED AND QUALIFIED REFRIGERATION TECHNICIANS. THIS BOOK IS A GUIDELINE FOR ASSISTING AND SHOULD
DEMA MODEL 604T-WI INSTALLATION INSTRUCTIONS
DEMA MODEL 604T-WI I. PARTS: A. Select-O-Matic Assembly B. 2 Pcs. Foot Strainers & 1/4" ID Tubing C. 4 Pcs. Mounting Screws & Anchors D. 1 Pc. 100-15K Metering Tip Kit (604T Only) E.1 Pc. Backflow Preventer
Solenoid valves Type EVU for fluorinated refrigerants
Data sheet Solenoid valves EVU for fluorinated refrigerants EVU solenoid valves are designed to fit into compact refrigeration systems. Available in direct and pilot operated versions, they can be applied
TABLE 1. * SPECIFY S Stainless Steel Knob Part No S or Part No ST (for tips) for pressure exceeding 700 PSI.
1. PARTS A. Injector B. Ceramic Weight. C. Plastic tubing 8' long with foot strainer. 2. INSTALLATION The injector may be installed in any position in the water line with the arrow in the direction of
Solenoid valve for R410A and R744 Types EVR 2 - EVR 6 and EVRH 10 - EVRH 40
Data sheet Solenoid valve for R410A and R744 s EVR 2 - EVR 6 and EVRH 10 - EVRH 40 EVRH high pressure range is a direct or servo operated solenoid valve specially designed to meet the requirements for
P7RE Series TECHNICAL SPECIFICATIONS. FEATURES and BENEFITS. Single Packaged Air Conditioner
TECHNICAL SPECIFICATIONS P7RE Series Single Packaged Air Conditioner P7RE 14 SEER 2 thru 5 Ton Units Cooling: 23,800 to 56,000 Btuh The P7 Series single packaged air conditioners are high efficiency self
DEMA BLEND CENTER MODEL 681GAP-3 INSTALLATION INSTRUCTIONS
1. PARTS CHECKLIST: A. Blend Center Assembly B. Vinyl Supply Tubing with Foot Valve Assembly C. Ceramic Weight D. Vinyl Outlet Tubing E. Screw and Anchor Kit F. Label Card G. Metering Tip Kit 2. INSTALLATION:
Product Data. FF1E Base Series Fan Coil Sizes 018 thru 036 FEATURES
Base Series Fan Coil Sizes 018 thru 036 Product Data FEATURES The Series Fan Coil unit is primarily designed for apartment applications as upflow indoor air handlers for split -system heat pumps and air
Distributed By: M&M Control Service, Inc
Control Valves DESIGN & OPERATION Description A control valve is a device capable of modulating flow at varying degrees between minimal flow and full capacity in response to a signal from an external control
Shell & Tube Heat Exchangers
Shell & Tube Heat Exchangers Pre-Engineered Series: BCF/SSCF/SX2000/B300 PrOdUC Shell & Tube Heat Exchangers As the recognized leader in heat exchanger products, systems and technology, Standard Xchange
DEMA SPRAY CLEAN MODELS: 244CDF & 244CDFT INSTALLATION INSTRUCTIONS
I. PARTS: A. Injector. B. Spray gun. C. Mounting screws and washers. D. Vinyl supply tubing, foot strainer & ceramic weight. E. Metering tip (specified size, model 244CDFT only). II. INSTALLATION: (See
PRESSURE REDUCING VALVES
14.01 Part No. 536 536 WRAS APPROVED BRASS BODY WITH BSP THREADED CONNECTIONS SUITABLE FOR WATER & AIR The 536 pressure reducing valve is a economical and reliable solution for water and air applications.
Pressure operated water valve Type WVFX and WVS
Data sheet Pressure operated water valve WVFX and WVS Pressure operated water valves types WVFX and WVS are used for regulating the flow of water in refrigeration plants with water-cooled condensers. The
WATER-COOLED CONDENSERS
-COOLED CONDENER P701 -COOLED CONDENER (5 to 400 Nominal Tons) Totaline s water-cooled condensers are designed for a wide range of applications and are available in many models ranging from 5 to 400 nominal
SECTION Pressure & Temperature Control
16 Pressure & Temperature Control ARMSTRONG PRODUCT CATALOGUE 70 Pressure Reducing s Pressure Reducing s Armstrong pressure reducing valves (PRVs) and temperature regulators help you manage steam, air
Electronic Control Valves
MODEL 131 Series (Full Internal Port) 631 Series (Reduced Internal Port) Electronic Control Valves Model 131-01/631-01 Simple Proven Design Quality Solenoid Pilot Controls Ideal For SCADA Systems Multi-Function
P7RE Series Single Packaged Air Conditioner
TECHNICAL SPECIFICATIONS P7RE Series Single Packaged Air Conditioner 14 SEER 2 thru 5 Ton Units Cooling: 23,800 to 56,000 BTUH The P7 Series single packaged air conditioners are high efficiency self contained
DEMA BLEND CENTER MODELS: 633GAP INSTALLATION INSTRUCTIONS
The 633GAP Series Blend Center modular design lets you easily couple together any number of stations to create a system that meets your specific needs. Mix and match both high and low flow units for filling
P7RE Series Single Packaged Air Conditioner
TECHNICAL SPECIFICATIONS P7RE Series Single Packaged Air Conditioner 14 SEER 1½ thru 5 Ton Units Cooling: 17,800 to 56,000 BTUH The P7 Series single packaged air conditioners are high efficiency self contained
SPLIT-SYSTEM AIR-COOLED CONDENSING UNITS DESCRIPTION FEATURES H2CA300, 360, 480 & THRU 50 NOMINAL TONS
550.13-TG1Y(98) SPLIT-SYSTEM AIR-COOLED CONDENSING UNITS HCA300, 360, 80 & 600 5 THRU 50 NOMINAL TONS HCA80 DESCRIPTION These units are completely assembled, piped and wired at the factory to provide one-piece
The 606T-2 unit is designed to be used as a spray or foam unit where up to two chemicals can be attached to the unit along with a clean water rinse.
Overview The 606T-2 unit is designed to be used as a spray or foam unit where up to two chemicals can be attached to the unit along with a clean water rinse. The unit features three ball valves for control
00000 Series Clevis Pin Slotted Hexagon Hex Key Recommended Corresponding Part No. Part No. Size Torque Preload SLT* SLT* HEX
00000 Series Clevis Pin All clevis pins are manufactured from heat treated 416 stainless steel to provide superior strength and wear. Hardness is between 37-40 Rc. The DCD Clevis Pin is a shouldered type
Heat Exchangers & Enhanced Surface
Tru-Twist Technology! Product Catalog Edition l A wor ld leader in enhanced heat transfer technology. Coaxial Heat Exchangers & Enhanced Surface Geothermal Renewable Energy Turbotec Products, Inc. Water
TYPE ET14 TEMPERATURE REGULATOR CAST IRON, BRONZE or STEEL CONTROLS 20 to 500 F
TYPE ET14 TEMPERATURE REGULATOR CAST IRON, BRONZE or STEEL CONTROLS 20 to 500 F Temperature Regulation for Batch Process Storage Heaters (Water, Fuel Oil or Chemical) Air Heating TYPE ET14 TEMPERATURE
Electrically Operated Expansion Valve Types AKV 10, AKV 15 and AKV 20
MAKING MODERN LIVING POSSIBLE Data sheet Electrically Operated Expansion Valve Types AKV 10, AKV 15 and AKV 20 AKV are electrically operated expansion valves designed for refrigerating plants. The AKV
Pilot operated main valves for regulating pressure and temperature, type PM
MAKING MODERN LIVING POSSIBLE Technical brochure Pilot operated main valves for regulating pressure and temperature, type PM PM valves are pilot operated main valves for regulating pressure and temperature