INDUSTRIAL PUMPS. MAGNETIC DRIVE PUMPS MECHANICAL DRIVE PUMPS VERTICAL PUMPS
|
|
|
- Moses Matthews
- 5 years ago
- Views:
Transcription
1 INDUSTRIAL PUMPS MAGNETIC DRIVE PUMPS MECHANICAL DRIVE PUMPS VERTICAL PUMPS
2 MAGNETIC DRIVE PUMPS M15 M50 M7 M25 2
3 M200 M390 M100 M290 Pump body made of injected plastic (Polypropylene or PVDF) Excellent resistance to strong acids Max. fluid temperature = 80 C (PP), 110 C (PVDF) Closed centrifugal pump impeller with diffuser Very good efficiency Impeller driven by hight capacity magnetic coupler No gaskets, no risk of leaks Compatible with fluids of density up to 2 according to models Ceramic / ceramic impeller bearing oversized with ceramic / PTFE stop Very long lifetime (running dry prohibited) Integrated electric motor Reduce dimensions Automatic repriming Suction head up to 2M Optional dry run detector Enables to shut down the pump in cas sthe colute case is empty Models Motor power rating (kw) Maximum flow rate (m 3 /h) Maximum manometric head (m) diameter (inlet) diameter (outlet) M Ø12 Ø12 M G1 - DN15 G1 - DN15 M G1 - DN15 G1 - DN15 M G1 1 /4 - DN20 G1 1 /4 - DN20 M G1 1 /2 - DN25 G1 1 /2 - DN25 M G2 G1 1 /2 - DN25 M G2 1 /4 - DN40 G2 1 /4 - DN40 M G2 1 /4 - DN40 G2 1 /4 - DN40 M G2 3 /4 - DN50 G2 3 /4 - DN50 M G2 3 /4 - DN50 G2 3 /4 - DN50 M G2 3 /4 - DN50 G2 3 /4 - DN50 M Tr 108x5 - DN65 G2 3 /4 - DN50 3
4 MECHANICAL DRIVE PUMPS A15 - A30 A15 A18 A27 Pump body made of injected plastic (Polypropylene or PVDF) Excellent resistance to strong acids and bases Max fluid temperature = 80 C (PP), 110 C (PVDF) Closed centrifugal pump impeller with diffuser Very good efficiency Impeller on drive shaft with mechanical seals Carbide / carbide gasket, very resistant to wear Integrated electric motor Reduced demensions Automatic repriming Suction head up to 2 m Models Motor power rating (kw) Maximum flow rate (m 3 /h) Maximum manometric head (m) diameter (inlet) diameter (outlet) A G1 1 /2 - DN25 G1 1 /2 - DN25 A G2 1 /4 - DN40 G2 1 /4 - DN40 A G2 1 /4 - DN40 G2 1 /4 - DN40 A Tr 108X5 - DN65 G2 3 /4 - DN50 A Tr 108X5 - DN65 G2 3 /4 - DN50 4
5 MECHANICAL DRIVE PUMPS A31 - A33 A31 A32 PP Pump body made of rubber-lined cast iron Excellent resistance to strong acids and bases Max fluid temperature = 80 C Closed centrifugal pump impeller Very good efficiency Impeller on drive shaft with mechanical seals Carbide / carbide gasket, very resistant to wear Integrated electric motor Reduce dimensions Models Motor power rating (kw) Maximum flow rate (m 3 /h) Maximum manometric head (m) diameter (inlet) diameter (outlet) A Ø 54 Ø 54 A Ø 54 Ø 54 A Ø 54 Ø 54 A33 PP Tr 108X5 - DN65 G2 3 /4 - DN50 A31 PP Tr 108X5 - DN65 G2 3 /4 - DN50 A32 PP Tr 108X5 - DN65 G2 3 /4 - DN50 * Optional flauge inlet / outlet 5
6 VERTICAL PUMPS T50 Vertical design T200 Assembly immersed in bath T202 Pump body made of injected plastic (Polypropylene or PVDF) Impeller driven by a cantilever shaft (T050/200 and T072/242) Impeller driven by a long drive shaft with ceramic / ceramic bearing (T101/201) Version with back-impeller (T072/242) Excellent resistance to strong acids and bases Max fluid temperature = 80 C (PP), 110 C (PVDF) No gaskets, no risk of leaks No wearing parts No gaskets, no risk of leaks Drive shaft height up to 756 mm Operation possible outside bath Models Motor power rating (kw) Maximum flow rate (m 3 /h) Maximum manometric head (m) diameter (inlet) diameter (outlet) T G1 1 /2 - DN25 T G1 1 /2 - DN25 T100 / T / 16 - G2 - DN32 T140 / T / 17 - G2 - DN32 T200 / T / G2 - DN32 T G1 1 /2 - DN25 G1 1 /2 - DN25 T G2 1 /4 - DN40 G2 1 /4 - DN40 T G2 1 /4 - DN40 G2 1 /4 - DN40 T G2 3 /4 - DN50 G2 3 /4 - DN50 T G2 3 /4 - DN50 G2 3 /4 - DN50 6 T101
7 VERTICAL PUMPS SPP 4 SPP 50 SPP 90 Ergomic design with translucent rotative cover Easy hose replacement Three pump body sizes Flow from 0.08 l/m to 126 l/h 24V or 230V motor Speed from 10 to 125 rpm Large choice of hoses Teknoprène, Silicona, Viton AGITATION NOZZLES 5 volumes of liquid at the outlet Injector SIEBEC 63/4 1 volume of liquid at the inlet Venturi effect Diffusor Venturi designed nozzles Allows multiplying the flow rate by five Mounting on pipes immersed in the bath and connected to a pump Agitates and homogenizes the bath, accelerates the electrolytic metal deposition rate Made of PP or PVDF Excellent resistance to acids and bases 7
8 FRANCE SIEBEC SAS 9 rue des platanes ZAC Vence Ecoparc SAINT-ÉGRÈVE Tel. : +33 (0) Fax : +33 (0) contact@siebec.com DEUTSCHLAND Since its creation in 1958, SIEBEC has been designing and manufacturing in France a wide range of pumps and filters for industry as well as mini-stations for treating industrial effluents. SIEBEC GmbH Im Grund 11 Postfach WALZBACHTAL Tel. : +49 (0)7203/91300 Fax : +49 (0)7203/ info@siebecgmbh.de ENGLAND SIEBEC U.K. Ltd Unit 3 - ST.Alban s Business Park ST. ALBAN S RD STAFFORD - ST16 3DR Ph. : +44 (0) Fax : +44 (0) sales@siebec.co.uk ESPAÑA The SIEBEC Group is present in more than 40 countries through its subsidiaries and its distributor network. PRODUCTOS GALVANIZADOS SIEBEC S.L. Enric Morera, ESPLUGUES DE LLOBREGAT Tel. : Fax : ventas@siebec.com Head office Subsidiaries Distributors Your partner 04/2016
VERTICAL PUMPS T RANGE
022013 VERTICAL PUMPS surface treatment transfer agitation of chemical tanks cosmetics metallurgy France SIEBEC SAS 9 rue des platanes ZAC Vence Ecoparc 38120 SAINT-ÉGRÈVE England SIEBEC UK Ltd Unit 3
MECHANICAL MACHINING MINIPURE STATION FOR THE TREATMENT OF CUTTING AND PROCESS FLUIDS.
MINIPURE STATION FOR THE TREATMENT OF CUTTING AND PROCESS FLUIDS Machining of aluminium, copper, cast iron and steels Machining of plastics and composite materials Deep hole drilling Spark machining Vibratory
MECHANICAL MACHINING MINIPURE STATION FOR THE TREATMENT OF CUTTING AND PROCESS FLUIDS.
MECHANICAL MACHINING MINIPURE STATION FOR THE TREATMENT OF CUTTING AND PROCESS FLUIDS Machining of aluminium, copper, cast iron and steels Machining of plastics and composite materials Deep drilling Spark
Horizontal And Vertical Centrifugal Pumps
Horizontal And Vertical Centrifugal Pumps Lip Bellow Type JP-840 Series Horizontal Centrifugal Pumps are driven by a direct-coupled motor (maximum 3,000 rpm). They are especially suitable for the rapid
Oxiperm C 164 Fully automatic chlorine dioxide processing plant C, -450C,-750C, -1300C, -2500C. Service manual
Oxiperm C 164 Fully automatic chlorine dioxide processing plant 164-150C, -450C,-750C, -1300C, -2500C Service manual 15.710136-V3.0 1 Imprint Oxiperm C 164 Fully automatic chlorine dioxide processing plant
MMI L STAINLESS STEEL CENTRIFUGAL PUMPS Clean or slightly muddy liquids Corrosive fluids - Acids - Solvents OPERATING RANGES APPLICATIONS
OPERATING RANGES Flow rates of up to: m /h Manometric head of up to: mcl Max. operating pressure: / bar Temperature range: - C to + C DN (nominal diameter) of ports: Male Max. viscosity: cst MMI L STAINLESS
blue series bluepro series
5Hz water solutions blue series bluepro series DG blue DR blue DG bluepro DR bluepro GR bluepro AP bluepro D a t a b o o k l e t EN water solutions blue series bluepro series DG blue DR blue DG bluepro
F20 Series. Maximum Flow Rate: 1.0 gpm (3.8 l/min) Maximum Pressure: 1500 psi (103 bar) for Metallic Pump Heads
F2 Series Maximum Flow Rate: 1. gpm (3.8 l/min) Maximum Pressure: 15 psi (13 bar) for Metallic Pump Heads F2 Series Performance Capacities Max. Max. Flow Input @ 1 psi (69 bar) Model rpm gpm l/min F2-E
EVM. VERTICAL MULTISTAGE ELECTRIC PUMPS in cast iron, AISI 304, AISI 316. Your Life, our Quality. Worldwide. 36 Commercial
Vertical multistage centrifugal electric pumps available in various versions: cast iron (G), AISI 304 stainless steel (), AISI 316 stainless steel (L). APPLICATIONS Civil, industrial, agricultural and
DM 06 MAGNETIC DRIVE CENTRIFUGAL PUMPS
DM 6 Product of Italian origin Available in PP-PVDF Below head use No welded seams Max. flow rate from 7 m 3 /h Max head 8, m Extremely easy maintenance Low cost of spare parts No fluid leaks Viscosity
Centrifugal pumps. made of Polypropylene and PVDF for transferring aggressive media like acids and alkalies
Vertical and horizontal centrifugal pumps www.jesspumpen.com Centrifugal pumps made of Polypropylene and PVDF for transferring aggressive media like acids and alkalies Vertical centrifugal pumps of the
AGA-AGC. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE AGA 0.60 203 PERFORMANCE CURVE AGA 0.75 204 PERFORMANCE CURVE AGA 1.00 205 PERFORMANCE CURVE
ARBO. Pompen en Filters b.v.
ARBO Pompen en Filters b.v. Product group 1.1 Chemical pumps SealPro Applications For all transport or circulation duties of corrosive liquids, even high viscosity, with maximum efficiency. This series
NS Series Non Metallic End-Suction Centrifugal Pumps
Non Metallic End-Suction Centrifugal Pumps GFRPP CFRPVDF MECHANICAL SEAL GLAND PACKING Corrosion Resistant Chemical Pumps Non Metallic End-Suction Centrifugal Pumps GFRPP CFRPVDF MECHANICAL SEAL GLAND
Magnetic drive pumps A worldwide best-seller, our high-quality compact magnetic drive pumps
MD series Magnetic drive pumps A worldwide best-seller, our high-quality compact magnetic drive pumps Main material Magnetic drive seal-less pumps are free from leakage problems and the need for seal replacement.
IWAKI MAGNETIC DRIVE PUMPS MDM. Patent JAPAN / U.S.A. / TAIWAN / EU / CHINA
IWAKI MAGNETIC DRIVE PUMPS Patent JAPAN / U.S.A. / TAIWAN / EU / CHINA Magnetic drive process pump resistant to dry run damage The Series of Magnetic drive process pumps have wetted parts made of fluororesin.
DM 06 MAGNETIC DRIVE CENTRIFUGAL PUMPS
DM 6 Product of Italian origin Available in PP-PVDF Below head use No welded seams Max. flow rate from 7 m 3 /h Max head 8, m Extremely easy maintenance Low cost of spare parts No fluid leaks Viscosity
Flow-Through Fitting ARF 215
Flow-Through Fitting ARF 215 Standard Models Model for Pressurized Sensors Latest Product Information: www.knick.de Warranty Defects occurring within 1 year from delivery date shall be remedied free of
EVM. VERTICAL MULTISTAGE ELECTRIC PUMPS in cast iron, AISI 304, AISI 316. Your Life, our Quality. Worldwide. 36 Commercial
Vertical multistage centrifugal electric pumps available in various versions: cast iron (G), AISI 304 stainless steel (), AISI 316 stainless steel (L). APPLICATIONS Civil, industrial, agricultural and
Main material GFRPP IWAKI MAGNETIC DRIVE PUMPS
Main material IWAKI MAGNETIC DRIVE PUMPS A worldwide best-seller, our high-quality compact magnetic drive pumps Our series leak-free compact magnetic pumps are a worldwide best-seller and are used in medical
IWAKI MAGNETIC DRIVE PUMPS MDM. Patent JAPAN / U.S.A. / TAIWAN / EU / CHINA
IWAKI MAGNETIC DRIVE PUMPS Patent JAPAN / U.S.A. / TAIWAN / EU / CHINA Magnetic drive process pump resistant to dry run damage The Series of Magnetic drive process pumps have wetted parts made of fluororesin.
MONOBLOC CENTRIFUGAL ELECTRIC PUMP IN COMPLIANCE WITH EN 733 in cast iron
Cast iron monobloc centrifugal electric pumps in compliance with EN 733. APPLICATIONS Moving clean water for civil, agricultural, industrial use, pressure boosting units, heating and air conditioning plants
Infinity i-star 13 Flow: 13 m3/h - 6 m.w.c. A Infinity i-star 17 Flow: 17 m3/h - 6 m.w.c. A
PUMPS & BLOWERS 2011 PUMPS & BLOWERS PUMPS Series I - STAR Self priming centrifugal pumps for swimming pool with prefilter Quiet operation Prefilter with specially constructed clear lid with ring lock
SUBMERSIBLE PUMP RANGE
SUBMERSIBLE PUMP RANGE www.vegapumps.co.za INDEX VXM / VX SUBMERSIBLE PUMP... 4 PERFORMANCE DATA... 5 V RANGE SCREENED SWAGE SUBMERSIBLE PUMP... 6 PERFORMANCE DATA... 7 DIMENSIONAL DRAWING... 9 C-SERIES
ARBO. ARBO Magnetic drive pumps. Pompen en Filters b.v. Product group 2.2
ARBO Pompen en Filters b.v. ARBO Magnetic drive pumps Product group 2.2 Product group 2.2 MagPro Working principle Magnetic drive pumps are Seal-less. The driving torque is transmitted by a permanent magnetic
Vertical Immersion Pump VTP - BBF
MB / General VTP centrifugal pumps in block design (BBF) correspond to the system of two-pipe pumps. Basically these immersion pumps are single-level immersion pumps with vertical axis the main components
GENERAL INFORMATION THE BUSINESS STRATEGY IS CONCENTRATED ON: THE PRODUCT RANGE CONTAINS PUMPS FOR:
GENERAL INFORMATION SIVAG Pumpen Ges.m.b.H. is primarily concerned with manufacturing and distributing of pumps for many years. Basically the products are used for industrial purposes. Since 1989 the head
PSW SHALLOW WELL 1 ¼" 1" All pumps are tested at our factory PERFORMANCE CHART B-1
SHALLOW WELL PSW The PSW injection centrifugal shallow well pump is ideal for a house, a summer cottage or a country house. The diffuser (Polycarbonate) and the impeller (Noryl) precisely molded, assure
50Hz. water solutions. E SerieS DGE DRE GRE APE
Hz water solutions E SerieS DGE DRE GRE APE D a t a b o o k l e t EN water solutions E SerieS DGE DRE GRE APE Hz D a t a b o o k l e t E SERIES E Series General characteristics AISI 4 stainless steel
G25 Series API bar (350 psi) for Non-metallic Pump Heads. G25 with Cast Iron pump head
G25 Series Maximum Flow Rate: Maximum Pressure: 76 l/min (20.0 gpm) 69 bar (1000 psi) for Metallic Pump Heads 24 bar (350 psi) for Non-metallic Pump Heads API 674 ATEX G25 with Cast Iron pump head G25
- CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL 301 BEARINGS DIMENSIONS AND WEIGHT 400 PUMP 400 PACKING 401
CONTENTS Page - SPECIFICATIONS 200 PERFORMANCE RANGE and SELECTION CHART 201 TYPE KEY and CURVE SPECIFICATIONS 202 PERFORMANCE CURVE AGA 0.60 203 PERFORMANCE CURVE AGA 0.75 204 PERFORMANCE CURVE AGA 1.00
Primus 221 offers optimum dosing accuracy and operating convenience. The dosing flow variation is only ± 1,5 %
Product Information Primus 221 The versatile diaphragm dosing pump Primus 221 offers optimum dosing accuracy and operating convenience The dosing flow variation is only ± 1,5 % Primus 221 doses with a
BULLETIN 350A. Sethco FLOWS TO 225 GPM. Seal-less, Self Priming, Magnetic Drive Centrifugal Pumps. For Corrosive Liquid and Chemical Transfer
BULLETIN 350A FLOWS TO 225 GPM Sethco Seal-less, Self Priming, Magnetic Drive Centrifugal Pumps For Corrosive Liquid and Chemical Transfer SETHCO CORROSION RESISTANT SELF PRIMING MAGNETIC-DRIVE, SEAL-LESS
BULLETIN 340B. Sethco FLOWS TO 275 GPM. Seal-less, End Suction Magnetic Drive Centrifugal Pumps. For Corrosive Liquid and Chemical Transfer
BULLETIN 340B FLOWS TO 275 GPM Sethco Seal-less, End Suction Magnetic Drive Centrifugal Pumps For Corrosive Liquid and Chemical Transfer SETHCO END SUCTION CORROSION RESISTANT MAGNETIC DRIVE, SEAL-LESS
MD Series. MD Series Magnetic Drive Pumps. Magnetic Drive Pumps. 1 Year Warranty!
MD Series MD Series Magnetic Drive Pumps Magnetic Drive Pumps 1 Year Warranty! MD Series - MP Range Aquaplus MP range of leak-free compact magnetic drive pumps are our best-seller and are used in medical
SD Series. SD, SDA, SDL Series Heavy Duty Submersible Dewatering and Drainage Pumps 415V. Dewatering Pumps. 3 Year Warranty!
SD Series SD, SDA, SDL Series Heavy Duty Submersible Dewatering and Drainage Pumps 41V Dewatering Pumps 3 Year Warranty! SD Series Heavy Duty Submersible Dewatering Drainage Pump 41V Aquaplus SD Series
G10 Series API bar (350 psi) for Non-metallic Pump Heads. G10 with Cast Iron pump head
G10 Series Maximum Flow Rate: Maximum Pressure: 33.4 l/min (8.8 gpm) 103 bar (1500 psi) for Metallic Pump Heads 24 bar (350 psi) for Non-metallic Pump Heads API 674 ATEX G10 with Cast Iron pump head G10
Tapflo - your reliable pumpchoice
Tapflo - your reliable pumpchoice Tapflo - your reliable pumpchoice With experience from industrial fluid handling and pump manufacture since 1970, we know what you as a customer require from an industrial
Centrifugal Immersion Pumps
Centrifugal Immersion Pumps FLUX Centrifugal Immersion Pumps Quality that sets standards. Manufactured at our main plant, these ranges of immersion pumps are the result of extensive product and process
Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY 202 CURVE SPECIFICATIONS 203 PERFORMANCE CHART COMPACT A 204 PERFORMANCE CHART COMPACT B 205
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY 202 CURVE SPECIFICATIONS 203 PERFORMANCE CHART A 204 PERFORMANCE CHART B 205 - CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEALS 301
1 Full Year Factory Warranty SIKO PUMP
Catalogue No. SIKO-CQB-003 B A CATALOUGE FOR CQ MAG- DRIV E CEN TRIFUGAL PUMP 1 Full Year Factory Warranty Food & Beverage Mining Paints & Dyes Petrochemical Pharmaceutical Pulp & Paper Power & Energy
- CONSTRUCTIONS 300 SECTIONAL VIEW 300 CONSTRUCTIONS 301 CONSTRUCTIONS 302 MECHANICAL SEAL 303 COUNTERFLANGE 304
CONTENTS Page - SPECIFICATIONS 200 PUMP SPECIFICATION 200 TYPE KEY 201 SELECTION CHART 202 SELECTION CHART 203 PERFORMANCE CURVE 3 ( 3-4-5-6 impellers ) 204 PERFORMANCE CURVE 3 ( 7-8-9 impellers ) 205
- CONTENTS SPECIFICATIONS 200 SELECTION CHARTS 201 PERFORMANCE CHART 2CDX PERFORMANCE CHART 2CDX PERFORMANCE CHART 2CDX
CONTENTS Page - CONTENTS 100 - SPECIFICATIONS 200 SELECTION CHARTS 201 PERFORMANCE CHART 70 202 PERFORMANCE CHART 120 203 PERFORMANCE CHART 200 204 - CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL
CENTRIFUGAL IMMERSION PUMPS
CENTRIFUGAL IMMERSION PUMPS FLUX CENTRIFUGAL IMMERSION PUMPS QUALITY THAT SETS STANDARDS Manufactured at our main plant, these ranges of immersion pumps are the result of extensive product and process
Product Information Stepper Motor-driven Diaphragm Dosing Pump MEMDOS SMART LP
Product Information Stepper Motor-driven Diaphragm Dosing Pump Reliable dosing of chemicals Stepper motor driven diaphragm pumps are particularly suitable for highly accurate, reproducible industrial dosing
Immersion fittings. Brief description. Installation options Standard. Series Page 1/7. Data Sheet
JUMO GmbH & Co. KG Delivery address:mackenrodtstraße 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
Self-priming pump «Wilo-Drain SP» Technical Presentation of the new pump Wilo-Drain SP 24/07/2013 Olivier Rieu
Self-priming pump «Wilo-Drain SP» Technical Presentation of the new pump Wilo-Drain SP 24/07/2013 Olivier Rieu Summary Pump Wilo-Drain SP overview Self-priming principle Pump Wilo-Drain SP features Curves
ARBO. Pompen en Filters b.v.
ARBO Pompen en Filters b.v. Product group 1.2 Chemical pumps KR/TK-HD Applications For all transport or circulation duties of corrosive liquids, even high viscosity, with maximum efficiency. This series
Magnetic drive pumps. A worldwide best-seller, our high-quality compact magnetic drive pumps GFRPP. Magnetic drive pumps. series.
MD series Magnetic drive pumps A worldwide best-seller, our high-quality compact magnetic drive pumps Magnetic drive pumps Main material Magnetic drive seal-less pumps are free from leakage problems and
Dosing pump series G A
Dosing pump series G A Flow rate up to 170 l/h Pressure up to 12 bar Mechanically actuated diaphragm Variable eccentric drive mechanism Main technical characteristics Flow rate up to 170 l/h Pressure up
20EVP-A SERIES. Vertical In-Line Self-Priming Centrifugal Pumps for Petroleums and Solvents. Marlow Pumps. Marlow Pumps.
2EVP-A SERIES Vertical In-Line Self-Priming Centrifugal Pumps for Petroleums and Solvents PUMP: Heavy-duty cast iron construction, with 2 NPT female threaded, in-line suction and discharge ports. This
GMP Bare Shaft Semi Trash Pumps. Applications: GB6XR-A/W ASBR x GB8XR-A/W ASDV x
Aussie GMP bare shaft self priming centrifugal semi trash pumps are designed for long coupling to electric motors, petrol or diesel engines, hydraulic or PTO drives. Available in 1½, 2, 3, 4 and 6 configurations
SP SERIES SELF-PRIMING MAG DRIVE
SP SERIES SELF-PRIMING MAG DRIVE spend less time waiting. and more time pumping. year Big on power yet short on energy consumption, the SP Series from Finish Thompson is one of the most versatile and economical
EXPLODED VIEW & PARTS LIST
SECTION 8 EXPLODED VIEW & PARTS LIST A025-SQ*-****-*** BOX PLASTIC 16 PARTS LIST - BOX PLASTIC A025-SQ*-****-*** 1 LEFT MANIFOLD 1 A025-SQP-****-*** 10503-40 Polypropylene A025-SQY-****-*** 10503-46 Conductive
NJK Series ISO Standard End-Suction Centrifugal Pumps
ISO Standard End-Suction Centrifugal Pumps PVDF CFRPVDF ISO 8 ISO 5199 EN 28 Armour Type Corrosion Resistant Chemical Pumps ISO Standard End-Suction Centrifugal Pumps PVDF CFRPVDF ISO 8 ISO 5199 EN 28
69 bar (1000 psi) for Metallic Pump Heads 24 bar (350 psi) for Non-metallic Pump Heads
G25 Series Maximum Flow Rate: Maximum Pressure: 76 l/min (20.0 gpm) 69 bar (1000 psi) for Metallic Pump Heads 24 bar (350 psi) for Non-metallic Pump Heads API 674 ATEX G25 with Cast Iron pump head G25
G03 Series. 24 bar (350 psi) for Non-metallic Pump Heads. G03 Shaft-driven with Stainless Steel pump head
G03 Series Maximum Flow Rate: Maximum Pressure: 11.7 l/min (3.1 gpm) 103 bar (1500 psi) for Metallic Pump Heads 24 bar (350 psi) for Non-metallic Pump Heads ATEX G03 Shaft-driven with Stainless Steel pump
SMX-F. Self-priming magnetic drive pumps. Chemically resistant self-priming magnetic drive pumps which can tolerate abnormal operation CFRETFE
SMX-F series Self-priming magnetic drive pumps Chemically resistant self-priming magnetic drive pumps which can tolerate abnormal operation Self-priming magnetic drive pumps Main material CFRETFE The SMX-F
2CDX. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 70 203 PERFORMANCE CURVE 120 204 PERFORMANCE CURVE 200 205 - CONSTRUCTIONS 300 SECTIONAL VIEW
SCHMITT. product information. Kreiselpumpen. U Pump Series. normal priming, centrifugal pumps with a single mechanical seal.
SCHMITT Kreiselpumpen chemical resistant pumps for corrosive and highly pure media product information U Pump Series normal priming, centrifugal pumps with a single mechanical seal materials: PVDF Description
G10 Series API bar (350 psi) for Non-metallic Pump Heads. G10 with Cast Iron pump head
G10 Series Maximum Flow Rate: Maximum Pressure: 33.4 l/min (8.8 gpm) 103 bar (1500 psi) for Metallic Pump Heads 24 bar (350 psi) for Non-metallic Pump Heads API 674 ATEX G10 with Cast Iron pump head G10
Models 9202C, 9203C, 9252C-C, and 9253C-C
Models 0C, 03C, C-C, and 3C-C 3 0 3 consists of () Ref. O-ring, () Ref. Mechanical Seal (Viton) and () Ref. Gasket. NOTE: When ordering parts, give quantity, part number, decription, and complete model
A measured step forward
A measured step forward Centrifugal pumps Dosing Conveying Control Liquids Gases Systems Chemical centrifugal pumps For industrial piping construction Tradition creates innovation Many decades of experience
MDM. Magnetic drive pumps Magnetic drive process pump resistant to dry run damage. Magnetic drive pumps. series
MDM series Magnetic drive pumps Magnetic drive process pump resistant to dry run damage Magnetic drive pumps The MDM Series of Magnetic drive process pumps have wetted parts made of fluororesin. Patent
G10 Series API bar (350 psi) for Non-metallic Pump Heads. G10 with Cast Iron pump head
G1 Series Maximum Flow Rate: Maximum Pressure: 33.4 l/min (8.8 gpm) 13 bar (15 psi) for Metallic Pump Heads 24 bar (35 psi) for Non-metallic Pump Heads API 674 ATEX G1 with Cast Iron pump head G1 with
G20 Series. 24 bar (350 psi) for Non-metallic Pump Heads. G20 Close-coupled with Brass pump head ATEX. G20 Version 5 10/16
G20 Series Maximum Flow Rate: Maximum Pressure: 3.8 l/min (1.0 gpm) 103 bar (1500 psi) for Metallic Pump Heads 24 bar (350 psi) for Non-metallic Pump Heads ATEX G20 Close-coupled with Brass pump head G21
TECHNICAL DESCRIPTION
TECHNICAL DESCRIPTION STN-SP are self-priming magnetic driven centrifugal pumps in close-coupled execution. Ideal for safe installation priming from the top of vessels and/or tanks for transferring acids,
CP Centrifugal pumps PERFORMANCE RANGE INSTALLATION AND USE APPLICATION LIMITS PATENTS - TRADE MARKS - MODELS CONSTRUCTION AND SAFETY STANDARDS
CP Centrifugal pumps PERFORMANCE RANGE Flow rate up to 900 l/min (54 m³/h) Head up to 74 m APPLICATION LIMITS Manometric suction lift up to 7 m Liquid temperature between -10 C and +90 C Ambient temperature
SPECIAL SERIES. New 30 kw high-pressure water jetting units
SPECIAL SERIES New 30 kw high-pressure water jetting units Easy Power XL : the best answer More power for fast and effective to all your requirements Powered by operations GENERAL FEATURES Sturdy painted
self-priming thermoplastics magnetic drive pumps
Rhino TMA Alifter TMA EU product Made in Italy self-priming thermoplastics magnetic drive pumps 2 Rhino - Alifter Chemical pumps In this catalog Argal offers self priming pumps with magnetic drive TMA
Versatile, Reliable Pumps for a Wide Range of Applications H25 Series
Versatile, Reliable Pumps for a Wide Range of Applications H25 Series Pumps the full spectrum of low-to-high viscosity fluids. Features a seal-less design and horizontal disk check valves that enable the
SUBMERSIBLE SEMI-VORTEX SEWAGE PUMPS
SUBMERSIBLE SEMIVORTEX SEWAGE PUMPS The model pump has a unique semivortex construction of EBARA s own design. This pump is as effi cient as a conventional nonclog pump which uses the centrifugal force
abcdef EJseries Self-Priming Centrifugal Pumps where innovation flows SNG
abcdef SNG 9 where innovation flows Self-Priming Centrifugal Pumps EJseries www.euroflopumps.com Coding System EJseries Series EJS = Shaft Sewage Bare Pumps EJT = Large Flow Trash Pumps EJU = High Head
Single-stage centrifugal pumps to standards en 733 (nfe 44111) and iso 5199 Industry Agriculture - Heating
OPERATING LIMITS Flow up to : m /h Head up to : mce Service pressure up to : Jusqu à bar* Temperature range : - à +7 C hot water up to : + C * depending on model NOLH Single-stage centrifugal pumps to
Products: Composite Hose Metall Hose Bellows, Compensators Swivel Joints Composite Hose. Metall Hose, Bellows and Compensators
Composite Hose Metall Hose Bellows, Compensators Swivel Joints Composite Hose Very flexible and easy to handle hoses for trucks, ships, railroad cars and industrial applications. Available in various designs
Submersible Stainless Steel Semi-Vortex Pumps Pumps
Technical Data Right Submersible Stainless Steel Semi-Vortex Pumps Pumps EBARA PUMPS AUSTRALIA PTY. LTD. DWVOX_Techdata_SS_ Right_Techdata_DS_ CONTENTS -SPECIFICATIONS Page Features & Applications 100
IWAKI MAGNETIC DRIVE PUMPS MDM. Patent JAPAN / U.S.A. / TAIWAN / EU / CHINA
IWAKI MAGNETIC DRIVE PUMPS Patent JAPAN / U.S.A. / TAIWAN / EU / CHINA Magnetic drive process pump resistant to dry run damage The Series of Magnetic drive process pumps have wetted parts made of fluororesin.
Volute Casing Pump additional sizes to those of ISO 2858/EN 22858
Volute Casing Pump additional sizes to those of ISO 2858/EN 22858 CBTA 150200...350400 + 2 additional sizes 100160 and 125200 TECHNICAL DATA Output: up to 2200 m 3 /h Delivery head: up to 160 m Speed:
Supply plus delivery pressure must not exceed the admissible internal pump pressure.
Vertical High-Pressure Centrifugal Pump Series CVP Application For handling pure water and condensates. The fluids to be pumped must not contain any abrasive particles nor chemically attack the pump materials.
Versatile, Reliable Pumps for a Wide Range of Applications D10 Series
Versatile, Reliable Pumps for a Wide Range of Applications D10 Series Pumps the full spectrum of low-to-high viscosity fluids. Features a seal-less design and horizontal disk check valves that enable the
- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 BEARINGS 302 MECHANICAL SEAL 303 FITTINGS 304
CONTENTS 1 Page - SPECIFICATIONS 200 PERFORMANCE RANGE and SELECTION CHART 201 TYPE KEY and CURVES SPECIFICATIONS 202 PERFORMANCE CURVES 32-250/7.56 203 PERFORMANCE CURVES 32-250/9.26 203 PERFORMANCE CURVES
TRITUS. Submersible pumps with grinder
TRITUS Submersible pumps with grinder Filthy water Domestic use Civil use PERFORMANCE RANGE Flow rate up to 26 l/min (5.6 m³/h) Head up to 3 m APPLICATION LIMITS m maximum immersion depth (with a sufficiently
IWAKI MAGNETIC DRIVE PUMPS MDM. Patent & Pat.Pend. JAPAN / U.S.A. / EU / CHINA / TAIWAN
IWAKI MAGNETIC DRIVE PUMPS Patent & Pat.Pend. JAPAN / U.S.A. / EU / CHINA / TAIWAN Magnetic drive process pump resistant to dry run damage The Series of Magnetic drive process pumps have wetted parts made
MAN. Single-channel open impeller. motralec. electrical submersible pumps. General characteristics
motralec 4 rue Lavoisier. ZA Lavoisier. 953 HERBLAY CEDEX el. : 0.39.97.65.0 / Fax. : 0.39.97.68.48 Demande de prix / e-mail : service-commercial@motralec.com www.motralec.com Single-channel open impeller
103 bar (1500 psi) for Metallic Pump Heads
G35 Series Maximum Flow Rate: Maximum Pressure: 138 l/min (36.5 gpm) 13 bar (15 psi) for Metallic Pump Heads API 674 ATEX G35 with Stainless Steel pump head and SAE flanges G35 with Brass pump head G35
- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 QUANTITY FOR MODEL 302 MECHANICAL SEAL 303 BEARINGS 304 FITTINGS 305
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 SELECTION CHART TABLE 202 TYPE KEY AND CURVE SPECIFICATIONS 203 PERFORMANCE CURVE 3 ( 3-4-5-6 IMPELLERS ) 205 PERFORMANCE CURVE 3 ( 7-8-9 IMPELLERS
MODEL MAGPRO AM PG 2.2 CENTRIFUGAL PUMPS
MODEL MAGPRO AM M A G N E T I C D R I V E PG 2.2 CENTRIFUGAL PUMPS WORKING PRINCIPLE Magnetic drive pumps are Seal-less. The driving torque is transmitted by a permanent magnetic coupling to an internal
CHEMICAL PUMPS SINCE 1992
CHEMICAL S SINCE 1992 GENERAL CATALOGUE 2017 MAG-DRIVE CENTRIFUGAL S SEAL-LESS MAG DRIVE CENTRIFUGAL S In seal-less magnetic drive centrifugal pumps, the external magnet is directly connected to the motor
Materials: Parts of the pump in contact with the liquid are manufactured from the following standard
Plastic Centrifugal Pump For Chemical Process DIN EN 22858 (ISO 2858)Standard DESCRIPTION pumps are manufactured to DIN EN 22858 (ISO 2858) standards in respect of design, performance and dimensions. They
Chemical Pumps. With mechanical seal. Non-Metallic Close-Coupled Chemical Pump Type NP-B
Chemical Pumps With mechanical seal Non-Metallic Close-Coupled Chemical Pump Type NP-B In PP / PE-UHMW / PVDF Casing dimensions to EN 2288 / ISO 288 Applications Type NP-B chemical pumps are the solution
ARBO. ARBO Chemical pumps. Pompen en Filters b.v. DIN-EN ISO 2858 with mechanical seal. Product group 1.0
ARBO Pompen en Filters b.v. ARBO Chemical pumps DIN-EN 22585 - ISO 2858 with mechanical seal Product group 1. ARBO Pompen en Filters b.v. ARBO Chemical pumps DIN-EN 22585-ISO 2558 with mechanical seal
UŽSISAKYKITE internetu: telefonu: el.paštu:
UŽSISAKYKITE internetu: www.dominga.lt/eshop telefonu: +3 2322231 el.paštu: info@dominga.lt IM VERTICA CENTRIFUGA PUMPS The IM series of resin-encased vertical centrifugal pumps features high-performance
Flexible storage and handling with ProMinent The right products for storage and transfer of liquid chemicals
Flexible storage and handling with ProMinent The right products for storage and transfer of liquid chemicals Printed in Germany, PT PM 056 09/06 GB MT06 01 04/05 GB Storage and transfer Storage tanks Our
SCHMITT. product information. Kreiselpumpen. T Pump Series. submersible pumps. materials: PP or PVDF
SCHMITT Kreiselpumpen chemical resistant pumps for corrosive and highly pure media product information T Pump Series submersible pumps materials: PP or PVDF Description of the T Pump Series 2 - Submersible
CTM magnetic drive centrifugal pumps rev 1
CTM magnetic drive centrifugal pumps 2012 rev 1 your reliable pumpchoice With experience from industrial fluid handling and pump manufacture since 1970, we know what you as a customer require from an industrial
Non-Metallic Seal-less Mag-Drive Pumps
Non-Metallic Seal-less Mag-Drive Pumps Seal-less Mag-Drive Pump Specialists SOLID PP & PVDF Thermoplastic Mag-Drive Pumps Centrifugal, Turbine & Self-Priming From WARRENDER: Advanced design, materials
BULLETIN 340B. Sethco FLOWS TO 275 GPM. Seal-less, End Suction Magnetic Drive Centrifugal Pumps. For Corrosive Liquid and Chemical Transfer
BULLETIN 34B FLOWS TO 275 GPM Sethco Seal-less, End Suction Magnetic Drive Centrifugal Pumps For Corrosive Liquid and Chemical Transfer SETHCO END SUCTION CORROSION RESISTANT MAGNETIC DRIVE, SEAL-LESS
BHS1.com Accessories Battery Watering Devices
BHS1.com Accessories Battery Watering Devices BHS supplies a complete line of Battery Watering Devices to efficiently water industrial lift truck batteries. 10 Gallon Mobile Bladder Tank Sturdy 10 gal
BATCHING UNITS - PUMPS SERIES ACL - AXL - DPZ INSTRUCTIONS MANUAL WARNING!
BATCHING UNITS - PUMPS SERIES ACL - AXL - DPZ DOSING PUMPS SERIE ACL - AXL - DPZ STORAGE TANKS SERIE SL WATER METER SERIE CD - CW INSTRUCTIONS MANUAL WARNING! The equipment must be used only for the utilization
Specifications. Applications Ventilation of safety cabinets (STORM 10), scrubbers, fume capture arms, filter housing, etc. (STORM 12, 14, 16).
Specifications Applications Ventilation of safety cabinets (STORM 10), scrubbers, fume capture arms, filter housing, etc. (STORM 12, 14, 16). Housings: PP* Single block strong high density UV treated and