VERTICAL PUMPS T RANGE

Transcription

1 VERTICAL PUMPS surface treatment transfer agitation of chemical tanks cosmetics metallurgy France SIEBEC SAS 9 rue des platanes ZAC Vence Ecoparc SAINT-ÉGRÈVE England SIEBEC UK Ltd Unit 3 - ST.Alban's BusinessPark ST. ALBAN'S RD

2 T200 T070 T101 Features Pump body made of injected plastic (Polypropylene or PVDF) Closed centrifugal pump impeller with diffusion part Impeller driven by a cantilever shaft (T050-T200 & T072-T242) Impeller driven by a long drive shaft with ceramic/ceramic bearing (T101-T201) Advantages Excellent resistance to acids and bases Max. fluid temperature 80 C (PP), 110 C (PVDF) Very good efficiency Max. flow rate up to 22 m 3 /h Max. manometric head up to 18.5 m No gaskets, no risks of leaks No wearing parts No gaskets, no risks of leaks Drive shaft height up to 730 mm Version with back-impeller (T072-T242) Can be operated out of the tank

3 T vertical pumps with cantilever shaft Immersed mounting imperative, self priming 230/400 V 3 ph motor - 50Hz or 60 Hz upon request - 2,900 rpm Serial-mounted strainer, external or built into the volute case according to models Standard outlet tube with union nut Optional outlet tube with grooved nozzle Optional square fixation plate 302 mm wide 0.25 kw 5 m³/h - Max. head 6 m - Max. fluid temperature PP body 80 C PVDF body110 C EPDM - T050 pump < kw 7.2 m³/h - Max. head 9 m - Max. fluid temperature PP body 80 C EPDM - T070 pump < 1.3

4 T vertical pumps with cantilever shaft 0.75 kw 10 m³/h - Max head 13 m - Max.fluid temprature PP body 80 C EPDM - T100 pump < kw 14.5 m³/h - Max. head 14.3 m - Max. fluid temperature PP body 80 C EPDM - T140 pump < kw 18.5 m³/h - Max. head 15.5 m - Max. fluid temperature PP body 80 C EPDM - T200 pump < 1.3

5 T vertical pumps with bottom bearing Immersed mounting imperative, self priming Moteur 230/400 V 3 ph - 50 Hz or 60 Hz upon request- 2,900 rpm Serial-mounted strainer built into the volute case Bottom bearing made of 99% alumina ceramic Standard outlet tube with union nut, optional outlet tube with grooved nozzle with extra charge Optional square fixation plate 302 mm wide 0.75 kw 10 m³/h - Max head 16 m - Max. fluid temperature PP body 80 C EPDM - T101 pump < kw 14.5 m³/h - Max head 17 m - Max. fluid temperature PP body 80 C EPDM - T141 pump - < kw 18.5 m³/h - Max head 18.5 m - Max. fluid temperature PP body 80 C EPDM - T201 pump < 1.3

6 T vertical pumps with cantilever shaft and back-impeller Immersed mounting or out of the tank, self priming 230/400 V 3 ph motor- 50 Hz or 60 Hz upon request - 2,900 rpm Serial-mounted strainer built into the volute case (or external on T072 pump) Versions with vertical outlet tube with union nut as standard, optional outlet tube with grooved nozzle Versions with horizontal outlet with grooved nozzles as standard, optional flange fittings or union nuts Optional square fixation plate 302 mm wide 0.75 kw 7 m³/h - Max. head 10.8 m - Max. fluid temperature PP body 80 C EPDM - T072 pump < kw 11 m³/h - Max. head 14 m - Max. fluid temperature PP body 80 C EPDM - T102 pump < kw 14 m³/h - Max. head 14.5 m CE - Max. fluid temperature PP body 80 C EPDM - T142 pump < 1.2

7 T vertical pumps with cantilever shaft and back-impeller Immersed mounting or out of the tank, self priming 230/400 V 3 ph - 50 Hz or 60 Hz upon request - 2,900 rpm Serial-mounted strainer built into the volute case Versions with vertical outlet tube (except T242) with union nut as standard,optional outlet tube with grooved nozzle On T242 : horizontal outlet only, with grooved nozzles as standard, optional union nuts or flange fittings Optional square fixation plate 302 mm wide 1.5 kw 20 m³/h - Max. head 17 m - Max fluid temperature PP body 80 C EPDM - T202 pump < 1, kw 22.2 m³/h - Max. head 17 m - Max fluid temperature PP body 80 C EPDM - T242 pump < 1,3

8 T050 to T200 pumps Vertical pumps with cantilever shaft - Manometric head in meters - Output in m³/h - Yield in % Manometric head (m) 18 Yield % T T100 T T T Output (m 3 /h) advised operating range T050 T070 T100 T140 T Output (m 3 /h)

9 T101 to T201 pumps Vertical pumps with bottom bearing Yield % - Manometric head in meters - Output en m³/h - Yield in % T101 T201 T141 Manometric head (m) Output (m 3 /h) advised operating range T101 T141 T Output (m 3 /h)

10 T072 to T242 pumps Vertical pumps with back-impeller - Manometric head in meters - Output in m³/h Yield % - Yield in % Manometric head (m) T142 T072 T T T Output (m 3 /h) advised operating range T072 T102 T142 T202 T Output (m 3 /h)

11 T050 - T070 - T072 pumps Ø Ø262 Ø250

12 T050 pump Ø32 G 1"½ - DN ,5 Optional grooved nozzle MAXIMUM LEVEL MINIMUM LEVEL

13 T070 pump Ø , G 1"½ - DN25 MAXIMUM LEVEL 328 MINIMUM LEVEL 74 Optional outlet tube with grooved nozzle

14 T072 pump 60 Ø32 Optional outlet tube with grooved nozzle 265 G 1"½ - DN MAXIMUM LEVEL 374 MINIMUM LEVEL

15 T100 to T242 pumps , Ø Ø250 Ø262

16 T100 to T200 pumps Ø40 63,5 Optional grooved nozzle G 2" - DN32 MAXIMUM LEVEL MINIMUM LEVEL

17 T101 to T201 pumps Ø40 63,5 Optional grooved nozzle G 2" - DN32 MAXIMUM LEVEL MINIMUM LEVEL 76,5 38, ,5 or 756,5 according to model 380 or 580 according to model

18 T102 to T202 pumps Ø40 65,5 Optional grooved nozzle G 2" - DN32 MAXIMUM LEVEL MINIMUM LEVEL 1"1/2 BSP female thread

19 T242 pump 315 MAXIMUM LEVEL MINIMUM LEVEL G 1"1/2 G 2"3/4

20 T072 pump connections without outlet tube 87 B B 83.5 B 83.5 nxød 80.5 ØA 77.5 ØC ØA 77.5 ØC Pumps Grooved nozzles Union nuts Flange fittings ØA - B ØC (DN) - B ØC - ØA - nxød - B T072 Inlet Outlet Ø25-35 G1"1/2 - DN25-31,5 Ø115 - Ø85-4xØ14-31,5

21 T102 to T202 pumps connections without outlet tube B B B ØA A n x ØD ØA ØC Pumps Grooved nozzles Union nuts Flange fittings ØA - B ØC (DN) - D ØC - ØA - nxød - B T102 - T142 Inlet Outlet G2"1/4 - DN x18-60 T202 Inlet Outlet G2"3/4 - DN x18-60

22 T242 pump connections G 2"3/4 D D Union nuts B B ØA B B nxød ØA ØC Grooved nozzles ØA Flange fittings Pump Grooved nozzles Union nuts Flange fittings ØA - B ØC (DN) - D ØA - ØC - nxød - B T242 Inlet Ø65-89 G2"3/4 - DN50-102,5 Ø165 - Ø125-4x18-94 Outlet Ø50-55 G2"3/4 - DN50-60 Ø165 - Ø125-4x18-60