Smart Look Series Meter

Transcription

1 File No. E Technical Data Sheet Smart Look Series Meter 1/2 The moving iron & moving coil panel meters sizes 2 " 1/2, 3 " are housed in a moulded polycarbonate cases which are suitable for the measurement of AC & DC ammeters, voltmeter & frequency meters utilizing a high torque pivot and jewel movement and elapsed time meters. Special Features Surface mounting. Near linear scale. Glass lled polycarbonate housing (UL 94 V-0). Compact case sizes.

2 ' Smart Look Series Meter Application The smart look range of analog panel meters offers accurate measurement and indication of most electrical 1/2 & electronics parameters in industry standard 2 " 1/2, 3 " case sizes. A range of short scale panel meters that comply with Internationally recognised specifications. Their rugged design will suit demanding environmental applications. Functional Areas Switchgear Distribution systems Control panels Generator sets Energy managment Building managment Utility power managment Process control Motor monitoring Features 1/2 " 1/2 " Two case sizes available : 2, 3 inches Dust and water jet protected to IP54 (NEMA 4) Withstands high levels of shock, vibration, dirt and humidity. UL approved. Instruments comply with EN and meets IEC414 Dielectric Test. Complies with international standards : IEC51 (EN60051) or ANSI-C39.1 Benefits AC moving iron and moving coil mechanisms. ANSI standard case sizes. Elapsed time movement mechanism. Operation Moving Coil Meter Frequency Meter These meters offers a centre cored, self shielding moving coil Frequency meters use a 90 µ A movement driven by an movements using pivots, hairspring and spring jewels. Variations EMC hard frequency conversion circuit. in movement are limited by design. All DC voltmeters are 1000 Dials, Pointers and Scales ohms per volt, moving coil rectified products run at 900 ohms per volt. Milivolt meter use the 5 miliamps/50mv resistance. Standard dials are matt white black printed scales and a tubular knife- edge black are balanced within 1% of scale length and Moving Iron Meter feature a highly repeatable flattened are scale shape, ensuring This clapper type repulsion design utilizes a pivot, hairspring and consistently accurate measurement reading. Dials are jewel movement. The bottom jewel is oil filled to provide damping interchangable between the contendor range of products using while th top is spring for resilience.all voltmeters are manufactured the same input within the published specification of the meter. Options for non standard customer specific dials are available with internal voltage dropper resistor. upon request. Page 1 of 7 Version No. : APMSL/2016/08

3 Smart Look Series Meter Technical Specifications Applicable Standards Terminal bolts/leads DIN 46200/46282 Safety requirements and protective measures for Electrical indicating. instruments and their accessories Performance speci cations for direct acting indicating analogue electrical measuring instruments and their accessories IEC 529, IEC IS 1248 IEC 51 ANSI C UL Compatibility UL 94 V-0 Mechanical Data Case details Case material Front window Colour of case Position of use Panel xing Moulded case suitable for mounting in Control / switchgear panels Machinery consoles. Polycarbonate, ame retardant and drip proof as per UL 94 V-0. Polycarbonate (transparent) Black Vertical Fixing Stud Comply with following European directives 2004 / 108 / EC (EMC directive ), 2006 / 95/EC ( low voltage directive ) & amendment 93/68/EEC, For CE Marking. Panel thickness < 10 mm Pointer Pointer de ection 90 Scale characteristics Scale division Scale and Pointer Spear o (A) Near Linear above 10% of nominal full Scale value for moving iron (B) Linear scale for moving coil, frequency, moving coil with rectifier Coarse - ne Voltmeters and Ammeters & Frequency meters Fixing Reference Conditions Accuracy Terminals Terminal UNF, Washer UNF Surface mounting with 2 studs/3 studs /4 studs by 4-40 UNC studs. According to IEC 51/DIN EN Scale length mm mm DC Ammeters & Voltmeters Frequency Meters Ambient temperature 23 C ± 2 C 1.5% 0 to 100% of full scale deflection AC Ammeters & Voltmeters Moving iron: 1.5% 10 to 100% of full scale deflection Moving coil: 1.5% 0 to 100% of full scale deflection 0.5% of end scale value Position of use Nominal position ±1 Nominal Range of use Ambient Temperature C Position of use Vertical ± 5 Input Waveform Frequency Rated value of measured quantity sine wave, distortion factor < 5% 45-65Hz Other Conditions IEC 51/DIN EN Frequency External Magnetic Field FN ± 10% At 0.4 ka/m Page 2 of 7 Version No. : APMSL/2016/08

4 Smart Look Series Meter Electrical Data Elapsed Time Meter and Frequency Meter Voltage 100/125V 200/250V Frequency Meters B urden Accuracy Class 1.5 Options Front Window Color of Case Case 45 or 55Hz 55 or 65Hz 45 or 65 Hz 4 VA Maximum Moving Iron A.C. Ammeters & Voltmeters Rating Ammeters Voltmeters Overload Ammeters Voltmeters B urden Ammeters Voltmeters 1 to 30 A 10V to 600V Moving Coil D.C. Ammeters & Voltmeters Accuracy Class 1.5 Rating Ammeters Voltmeters x 1.2 for 2 Hours x 10 for 5 Sec x 1.2 for 2 Hours x 2 for 5 Sec 0.5 VA 4.5 VA 100mA to 30A 50mV to 600V Polycarbonate (Transparent) Black Environmental Conditions Climatic Suitability Climate category II as per IEC (climatic class 3 according to VDE/VDI 3540) Operating Temperature 0 C C Storage temperature Relative humidity Shock resistance - 20 C C 25% to 80% nominal range of use 15 g. for pulse duration 11ms Vibration resistance ANSI C39.1 cl Standard Measuring Ranges DC moving coil Ammeters (PQ) Safety Precautions o o 1) Instruments with damaged window or glasses must be disconnected from the mains. 2) Adequate safety clearance must be maintained to control panel fasteners and to sheet metal housing. If non - insulated connector wires are used. 3) Instruments to be used in grounded panel. o o 50 ma to 50 A DC moving coil Voltmeters (PQ) 50 mv to 600 V AC moving coil Ammeters (VQ) AC moving coil Voltmeters (VQ) AC moving iron Ammeters (EQ) AC moving coil Voltmeters (EQ) Frequency Meters Elapsed Time Meters (ETM) 1 ma to 100 ma 6 V to 600 V 100 ma to 30 A 6 V to 600 V Hz, Hz, Hz, Hz 110/130 V, 60 Hz Blank dial Special markings Division dials Color markings/bands Over range (Moving Iron Ammter) Dial With initial and end values marked Numbering/Lettering Basic divisions without numbering Red or green Two, three and ve times over range Page 3 of 7 Version No. : APMSL/2016/08

5 Smart Look Series Alpha Meter 70 Specifications A.C. AMMETERS - TRUE RMS READING (EQ) Rating 5A 10A 15A 20A 30A 60A 1A 5A Scale 0-5A 0-10A 0-15A 0-20A 0-30A 0-60A Transformer Rated Transformer Rated A.C. VOLTMETERS - TRUE RMS READING (EQ) Rating 150V 300V 600V 750V 0-1 ma 0-5 ma 0-10 ma 0-20 ma 0-50 ma ma ma ma ma 0-1A 0-2A 0-4A 0-5A 0-6A 0-10A 0-20A 0-30A D.C. AMMETERS (PQ) Rating 0-150V 0-300V 0-600V Transformer Rated 0-5 ma 0-10 ma 0-20 ma 0-50 ma ma ma ma ma 0-1A 0-2A 0-4A 0-5A 0-6A 0-10A 0-20A 0-30A MILLIAMMETERS - SUPRESSED ZERO (PQ) Rating 4-20 ma Scale Scale Scale Rating 0-50 mv mv 0-15 V 0-30 V 0-50 V V V V D.C. Voltmeters (PQ) FREQUENCY METERS, 120V (Self Contained) Rating 50 Hz 55 Hz 60 Hz 400 Hz 110/130 V, 50 Hz 200/250 V, 50 Hz 480 V, 50 Hz 110/130 V, 60 Hz 200/250 V, 60 Hz 480 V, 60 Hz Scale 0-15 V 0-30 V 0-50 V V V V Scale Hz Hz Hz Hz ELAPSED TIME METERS ( HOURS) (ETM) 1 ma 1.5 ma 10 ma 15 ma 20 ma 40 ma 60 ma 100 ma AC Moving Coil Ammeter (VQ) Rating AC Moving Coil Voltmeter (VQ) Rating Scale ma 0-10 ma 0-15 ma 0-20 ma 0-40 ma 0-60 ma ma Scale 100 V 150 V 250 V 400 V 500 V 600 V V V V V V V Page 4 of 7 Version No. : APMSL/2016/08

6 Smart Look Series Alpha Meter 70 Electrical Connections DC Amps - Self Contained DC Amps - For use with external shunt DC Volts AC Amps - Self Contained AC Amps - For use with Current Transformer AC Volts Frequency Meter Elapsed Time Meter Page 5 of 7 Version No. : APMSL/2016/08

7 Smart Look Series Meter Application Dimensions UNF 4-40 UNC PANEL CUT-OUT :- Specify the No. of fixing studs while ordering J Q Q J K L J N P Q Q M M Q Q STUD POSITION FOR TWO FIXING STUDS STUD POSITION FOR THREE FIXING STUDS STUD POSITION FOR FOUR FIXING STUDS 2 ½ mm Inch 3 ½ mm Inch A B C D E F G H J K L M N P Q Page 6 of 7 Version No. : APMSL/2016/08

8 Smart Look Series Meter For more details and product codes, please contact our local of ce Sifam Tinsley Instrumentation Inc. 3105, Creekside Village Drive, Suite No. 801, Kennesaw, Georgia (USA) Id : psk@sifamtinsley.com Web : Contact No. : Sifam Tinsley Instrumentation Ltd Unit 1 Warner Drive, Springwood Industrial Estate Braintree, Essex, UK, CM72YW sales@sifamtinsley.com Web: Contact: +44(0) Page 7 of 7 Version No. : APMSL/2016/08

9 Sifam Tinsley Instrume ntation Inc. Smart Look Series Coding Table Sifam Tinsley Instrumentation Inc. 3105, Creekside Village Drive, Suite No. 801, Kennesaw, GA (USA) Contact : psk@sifamtinsley.com Powered By Tec hn ology... Driven By Ser vice...

10 Product Code VQ2L- X XX X X X X Input type for VQ2L Current Meter I Voltage Meter V Measuring range for VQ2L 200uA uA uA 03 1mA 04 20mA mA 08 50V 2M 100V 2N 150V 2P 300V 2Q 500V 2R x xx xxx (For voltmeter :30-50V possible in 2.5%) (For ammeter : All ua ranges possible in 2.5%) Zero position for VQ2L Left Zero L Accuracy Class for VQ2L Class Class Class Type of Dial for VQ2L Standard Aluminum A Aluminum with Colour mark R Aluminium with colour bands C Without Dial X Blank Scale B Background for VQ2L Black Background B White background W NA X No. of stud for VQ2L Two stud 2 Three stud 3 Four stud 4 Customer Code for VQ2L Sifam Tinsley ST 000

11 Product Code VQ3L- X XX X X X X Input type for VQ3L Current Meter I Voltage Meter V Measuring range for VQ3L 200uA uA uA 03 1mA 04 20mA mA 08 50V 2M 100V 2N 150V 2P 300V 2Q 500V 2R x xx xxx (For voltmeter :30-50V possible in 2.5%) (For ammeter : All ua ranges possible in 2.5%) Zero position for VQ3L Left Zero L Accuracy Class for VQ3L Class Class Class Type of Dial for VQ3L Standard Aluminum A Aluminum with Colour mark R Aluminium with colour bands C Without Dial X Blank Scale B Background for VQ3L Black Background B White background W NA X No. of stud for VQ3L Two stud 2 Three stud 3 Four stud 4 Customer Code for VQ3L Sifam Tinsley ST 000

12 Product Code PQ2L- X XX X X X X Input type for PQ2L Current Meter I Voltage Meter V Measuring range for PQ2L 200uA uA uA 03 1mA 04 20mA mA mA 09 1A 10 3A 12 5A 13 10A 14 50mV 2A 100mV 2D 200mV 2E 1.5V 2F 10V 2J 100V 2N 150V 2P 300V 2Q 500V 2R x xx xxx Zero position for PQ2L Left Zero L Right Zero R Center Zero C Suppressed Zero S Shifted zero H Accuracy Class for PQ2L Class Class Class Type of Dial for PQ2L Standard Aluminum A Aluminum with Colour mark R Aluminium with colour bands C Without Dial X Blank Scale B Background for PQ2L Black Background B White background W NA X No. of stud for PQ2L Two stud 2 Three stud 3 Four stud 4 Customer Code for PQ2L Sifam Tinsley ST 000

13 Product Code PQ3L- X XX X X X X Input type for PQ3L Current Meter I Voltage Meter V Measuring range for PQ3L 200uA 500uA uA 03 1mA 04 20mA mA mA 09 1A 10 3A 12 5A 13 10A 14 30A 16 50mV 2A 100mV 2D 200mV 2E 1.5V 2F 10V 2J 100V 2N 150V 2P 300V 2Q 500V 2R x xx xxx Zero position for PQ3L Left Zero L Right Zero R Center Zero C Suppressed Zero S Shifted zero H Accuracy Class for PQ3L Class Class Class Type of Dial for PQ3L Standard Aluminum A Aluminum with Colour mark R Aluminium with colour bands C Without Dial X Blank Scale B Background for PQ3L Black Background B White background W NA X No. of stud for PQ3L Two stud 2 Three stud 3 Four stud 4 Customer Code for PQ3L Sifam Tinsley ST 000

14 Product Code EQ2L- X XX X X X X Input type for EQ2L Current Meter I Voltage Meter V Measuring range for EQ2L 1Amps 1.25Amps Amps 03 3Amps 04 5Amps 05 8Amps 07 12Amps 09 15Amps 10 20Amps 11 25Amps 13 30Amps V 2A 150 V 2B 250 V 2D 300V 2E 500V 2F 600V 2G 750V 2H 30V 2J 100 V 2K 165V 2L Suppression for EQ2L X1 1 X2 2 X3 3 X4 4 X5 5 X6 NA 6 X x xx xxx Accuracy Class for EQ2L Class Class Class Type of Dial for EQ2L Standard Aluminum A Aluminum with Colour mark R Aluminium with colour bands C Without Dial X Blank Scale B Background for EQ2L Black Background B White background W NA X No. of stud for EQ2L Two stud 2 Three stud 3 Four stud 4 Customer Code for EQ2L Sifam Tinsley ST 000

15 Product Code EQ3L- X XX X X X X Input type for EQ3L Current Meter I Voltage Meter V Measuring range for EQ3L 1Amps 1.25Amps Amps 03 3Amps 04 5Amps 05 8Amps 07 12Amps 09 15Amps 10 20Amps 11 25Amps 13 30Amps V 2A 150 V 2B 250 V 2D 300V 2E 500V 2F 600V 2G 750V 2H 30V 2J 100 V 2K 165V 2L Suppression for EQ3L X1 1 X2 2 X3 3 X4 4 X5 5 X6 NA 6 X x xx xxx Accuracy Class for EQ3L Class Class Class Type of Dial for EQ3L Standard Aluminum A Aluminum with Colour mark R Aluminium with colour bands C Without Dial X Blank Scale B Background for EQ3L Black Background B White background W NA X No. of stud for EQ3L Two stud 2 Three stud 3 Four stud 4 Customer Code for EQ3L Sifam Tinsley ST 000

16 Product Code ZQ2L- XX XX X X X X XXX XX Frequency for ZQ2L Hz Hz Hz Hz 38 Input Voltage for ZQ2L V V V V V V 06 Accuracy for ZQ2L Class Class Type of Dial for ZQ2L Standard Aluminum A Aluminum with Colour mark R Aluminium with colour bands C Background for ZQ2L Black Background B White background W Stud for ZQ2L Two stud 2 Three Stud 3 Four stud Customer Code for ZQ2L Sifam Tinsley ST

17 Product Code ZQ3L- XX XX X X X X XXX XX Frequency for ZQ3L Hz Hz Hz Hz 38 Input Voltage for ZQ3L V V V V V V 06 Accuracy for ZQ3L Class Class Type of Dial for ZQ3L Standard Aluminum A Aluminum with Colour mark R Aluminium with colour bands C Background for ZQ3L Black Background B White background W Stud for ZQ3L Two stud 2 Three Stud 3 Four stud Customer Code for ZQ3L Sifam Tinsley ST

18 Product Code ET2L- XX X X X X X X XX X X X Input type for ET2L V V V 07 Frequency for ET2L 50Hz 5 100Hz 6 Suppression for ET2L NA X Accuracy for ET2L NA X X Type of dial for ET2L Standard Aluminum A Background for ET2L White background W NA No. of Stud. ET2L Three stud 3 Four stud 4 Customer code for ET2L Sifam Tinsley ST 0 0 0

19 Product Code ET3L- XX X X X X X X XX X X X Input type for ET3L V V V 07 Frequency for ET3L 50Hz 5 100Hz 6 Suppression for ET3L NA X Accuracy for ET3L NA X X Type of dial for ET3L Standard Aluminum A Background for ET3L White background W NA No. of Stud. ET3L Three stud 3 Four stud 4 Customer code for ET3L Sifam Tinsley ST 0 0 0