PARTNER 11.0 HP 36" MOWER DECK LAWN TRACTOR MODEL NO. P1192 (P1192C)

Size: px

Start display at page:

Download "PARTNER 11.0 HP 36" MOWER DECK LAWN TRACTOR MODEL NO. P1192 (P1192C)"

Sheena Kennedy
5 years ago
Views:

1 ILLUSTRATED PARTS BREAK DOWN PARTNER 11.0 HP 3" MOWER DECK LAWN TRACTOR MODEL NO. P119 (P119C) RD PRINTED IN U.S.A.

2 SCHEMATIC RED BATTERY A AMMETER (OPTIONAL) RED FUSE RED M STARTER WHITE RED B S M G A1 L A CLUTCH / BRAKE (PEDAL UP) SOLENOID WHITE IGNITION SWITCH WHITE SEAT SWITCH (NOT OCCUPIED) BLUE HOUR METER (OPTIONAL) FUEL LINE ATT'MENT CLUTCH (CLUTCH OFF) IGNITION UNIT GROUNDING CONNECTOR SPARK PLUG GAP ( PLUGS ON TWIN CYL. ENGINES) CHARGING SYSTEM OUTPUT 3 AMP 300 RPM VOLTS AC 300 RPM (CHARGING SYSTEM DISCONNECTED) FUEL SHUT-OFF SOLENOID (IF SO EQUIPPED) ORANGE RED LIGHTING SYSTEM OUTPUT AMP 300 RPM DIODE ALTERNATOR IGNITION SWITCH POSITION CIRCUIT MAKE OFF RUN/LIGHT RUN M+G+A1 B+A1 B+A1 NONE A+L NONE START B + S + A1 NONE NOTE YOUR TRACTOR IS EQUIPPED WITH A SPECIAL ALTERNATOR SYSTEM. THE LIGHTS ARE NOT CONNECTED TO THE BATTERY, BUT HAVE THEIR OWN ELECTRICAL SOURCE. BECAUSE OF THIS, THE BRIGHTNESS OF THE LIGHTS WILL CHANGE WITH ENGINE SPEED. AT IDLE THE LIGHTS WILL DIM. AS THE ENGINE IS SPEEDED UP, THE LIGHTS WILL BECOME THEIR BRIGHTEST. 14 VOLTS AC 300 RPM (LIGHTS OFF) BROWN HEADLIGHTS NON-REMOVABLE CONNECTIONS REMOVABLE CONNECTIONS WIRING INSULATED CLIPS NOTE: IF WIRING INSULATED CLIPS WERE REMOVED FOR SERVICING OF UNIT, THEY SHOULD BE REPLACED TO PROPERLY SECURE YOUR WIRING.

3 ELECTRICAL

4 ELECTRICAL Battery Bolt Hex Hd 1/4-0 unc x 3/ Box Battery Fender Switch Interlock Harness Headlight Bulb Cable Battery Ga 11" Red Cable Battery Ga Red w/1 wir Fuse Nut Keps Hex 1/4-0 unc Cable Ground Ga 1" black Switch Plunger Nc Gray Switch Ignition Key Harness Ignition Bolt Blk Fin Hex 1/4-0 x 1/ Cover Terminal Red Solenoid Adapter Ammeter Rectangular Protection Wire Loop Cover Terminal Battery NOTE: All component dimensions given in U.S. inches. 1 inch =.4 mm. 4

5 CHASSIS Chassis-LT Laser_3 3 0

6 CHASSIS Chassis Drawbar BumperHood/Dash Saddle Clip, Retainer Slide-On Dash Bolt, Carriage 3/-1 x Dashboard, Panel LH Dashboard, Panel RH Machine screw /1-1 unc x 3/ Nut, Keps /1-1 Unc Hood Pnt BumperHood Bolt, Hex Head, Fin. 3/-1 x 1 Grade 19-1 Washer /3 x /1 x1 Gauge Nut Lock Hex w/ins. 3/-1 Unc Grille (Includes key Nos. 9, 1) Lens Fender Fender Bracket Footrest, LH Footrest, RH Bolt 3/-1 X 3/ Screw Thdrol /1-1 x 1/ Bracket Asm. Pivot Mower Rear Bracket Pivot Laser/Elite Rod Pivot Chassis/Hood Screw 10 x 3/4 Single Lead-Hex Screw Thdrol 3/-1 x 1/ Bolt Shoulder /1-1 TT Screw Thdrol 3/-1 x 1/ Screw Hexwsh Thdr 3/-1 x 3/ Insert Lens Refl ective Button Plug NOTE: All component dimensions given in U.S. inches. 1 inch =.4 mm.

7 DRIVE drive-saddle_31

8 DRIVE Transaxle Peerless, Model 04-0B (Order parts from transaxle manufacturer) Spring, Brake Return Pulley, Transaxle Ring, Retainer Strap, Torque Screw, /1-1 x 3/4 SMGML Bracket, T/A, Saddle Shift Rod, Shifter Pin, Cotter 1/ x Washer, Shift Plate Washer 1/3 x 3/4 x Bolt 1/4- UNF Gr. w/patch Washer Lock Bolt, Hex Flghd /1-1 Gr Nut Lock /1-1 unc Bolt, Fin Hex 3/-1 Unc x 1 Gr Locknut 3/ Knob Rod, Brake Nut, Hex Jam 3/ Spring, Rod, Brake 19-1 Washer /3 x /1 x 1 Ga Pin, Cotter 1/ x 3/ Rod, Brake, Park Cap, Plunger Bracket, Transaxle, L.H Bolt Hex Hd /1-1 unc x 3/ Shaft, Foot Pedal Bearing Nylon Washer 1/3 x 1 x 1 Ga Pin,Roll 3/1 x Pulley Idler Bolt 3/-1 unc x -3/4 Gr Keeper, Belt Pulley, Idler Bellcrank Asm Clutch Retainer, Belt Bolt, Carr. Sh 3/-1 x 1-1/ Gr Nut, Crownlock 3/ Nut, Crownlock / Link, Clutch Spring, Return, Clutch Screw 3/-1 x 1-1/ V-Belt, Drive Keeper Belt Center Span Screw 3/-1 x Cover, Foot Pedal Pulley, Engine Bolt, Hex /1-0 x 4 Gr Washer, Lock Hvy Hlcl Spr / Keeper, Belt Engine F-Proof Guide Belt Mower Drive RH Spacer, Split Washer /3 x 1-1/4 x 1 Ga E-Ring Key Square Washer /3 x 1-/ x 1 Ga Key Woodruff #9 3/1 x 3/ Retainer Spring 1" Ziinc/Cad Washer 9/3 x 3/4 x 10 Ga Strap Torque L.H. Lt Bolt RDHD SQNK 3/-1unc x Nut Lock Flg. 3/-1 Unc SpacerRetainer Washer /3 x x 10 Ga Keeper, Belt, Transaxle Bolt Carr Sh 3/-1 x 1-3/4 Gr Nut Hex Flange Lock Screw, 3/-1 x 3/4 SMGML Guard Muffl er Washer /3 x 1 x 14 Ga. NOTE: All component dimensions given in U.S. inches 1 inch =.4 mm

9 STEERING ASSEMBLY steering_pl.lt_4 9

10 STEERING ASSEMBLY Wheel Steering Opp. Sears Blk Axle Asm Spindle Asm LH Spindle Asm RH Bearing Race Thrust Harden Washer /3 x 1-/ x 1 Ga Washer /3 x 1-1/4 x 1 Ga Ring Klip #t Bearing Col Strg Blk Link Drag Washer Lock Hvy Hlcl Spr 3/ Nut Hex Jam Toplock 1/ Spacer Brace Axle Nut Hexfl ange Lock Shaft Asm Strg Bushing Link Drag Blk LR Washer /3 x / x 1 Ga Screw 3/-1 x Pin Cotter 1/ x 3/4 Cad Rod Tie Wire Form 19 Mech Bushing Strg Nat.3/.1Id Screw TT #10-3 x x 3/ Flange Cap Wheel Steer P/L Washer 9/1 x -3/ Nut Crownlock 3/ Adaptor Wheel Strg Boot Shaft Steering Washer /3 X 1 1/4 X 1 Ga Extension Steering Cap Spindle Fr Top Blk Fitting Grease Nut 1/ Bolt Hex 1/4- x 1-1/ Spacer Brace Axle Bolt RDHD SQ 3/-1 UNC x -1/ Brace Axle Steering Asm Bracket Susp. Chassis Front Bolt Shoulder / Cup Steering Washer Hardened NOTE: All component dimensions given in U.S. inches. 1 inch =.4 mm. 10

11 SEAT ASSEMBLY seat_lt.bolt_ Seat Bracket Pivot Seat Bolt Fin Hex 3/-1unc x Washer /3 x 1 x 10 Ga Clip Push-In Nut Lock Hex w/wsh 3/-1 Unc Spring Seat Cprsn 0 Blk Zi Screw 3/-1 x Washer /3 x 1 x 14 Ga Pan Seat Bracket Mounting Switch Bushing Snap Blk Nyl 0 Id Bolt Rdhd Sht Nk 1/4-0 x 1-1/ Spacer Split x 9 Yel Zinc Spring Cprsn 1 Blk Pnt Nut Lock 1/4 Lge Flg Gr Zinc Bolt Shoulder /1-1 Unc -A Nut Lock Hex W/Insert /1-1 UNC Bolt Hex Washer 1/3 x 1-3/1 x 1 Ga Bolt Shoulder /1-1 x Washer Lock Hvy HLCLSPR 1/ NOTE: All component dimensions given in U.S. inches. 1 inch =.4 mm 11

12 DECALS Decal Bat Dan/Poi P/L Symbols Decal Hood Decal Engine Decal Chas. Turbo Collection Decal Saddle Brake Parking Decal Fender Logo Decal Read Owners Manual Syms Decal Chassis Hot Muffl er Decal Mower Cut fi nger Symbol Decal 100 Dba Decal Strg Wheel Cap Decal Brake/Clutch Decal V-Belt Sch Decal Drawbar Load Limit Decal Lift Handle (Lift Handle) Manual Operator s Euro Manual Operator s Scan WHEELS & TIRES 1, 4,10 3, Cap Valve Tire Stem Valve Tire F Ts 1 X - Service Tube Front (Service Item Only) Rim Asm " front Service Fitting Grease (Front Wheel Only) Bearing Flange (Front Wheel Only) Rim Asm " rear Service Tire R Ts 1 x.- C. Service Tube Rear (Service Item Only) Cap Axle Blk 1 0 X 1 00 NOTE: All component dimensions given in U.S. inches 1 inch =.4 mm 1

13 ENIGNE OPTIONAL EQUIPMENT Spark Arrester engine-bs.1cyl_3

14 ENIGNE Control Th/ch Flag Screw Hex Thd Cut 1/4-0 x 1/ Engine B&S Model No. 1A0 (Order parts from engine manufacturer) Muffl er Gasket Eng Tube Drain Oil Easy Shield Brn/Dbr Guard Control Choke Kit Spark Arrecter Tank Fuel Front Cap Asm Fuel W/sym Vented Clamp Hose Blk Line Fuel 0" Plug Oil Drain Easy Bushing Snap Nyl Blk Fuel Line Screw Hexwsh Thdrol 1/4-0 x 3/ Screw Hexwsh Thdrol 3/-1 x 3/ Washer 9/3 x / x 1 Ga Screw Socket Head /1-1 x Screw 3/-1 x 1-1/ Nut Keps Hex 1/4-0 UNC NOTE: All component dimensions given in U.S. inches 1 inch =.4 mm 14

15 MOWER LIFT lift-rh.1piece_3 1

16 MOWER LIFT Wire Asm Inner W/Plunger Shaft Asm Lift Pin Groove E Ring # Washer PLTD 1/3 x 1 x 1Ga Bearing Nylon Blk 9 Id Grip Handle Bicycle Matte Blk Button Plunger Black Link Lift LH Link Lift RH Retainer Spring Link Front Nut Jam Hex 1/- Unc Trunnion Nut Lock W/Wsh 1/- Unc Arm Suspension Rear Retainer Spring Bearing Pvt Lift Nut Crownlock 3/-4 NOTE: All component dimensions given in U.S. inches 1 inch =.4 mm 1

17 3 4 REPAIR PARTS MOWER _clutch_mod_ _deck_LT_1 9 1

18 MOWER Mower Deck Assembly Bolt Bracket Assembly,Sway Bar Bracket Sway Bar Retainer Spring Bar Sway Deck Keeper Belt 3 0- Bolt, Hex 3/-4 x 1. Gr Washer, Lock Hvy Hlcl 3/ Washer,Hardened Blade, Mower 3-4 Shaft Assembly, Mandrel, Vented Housing, Mandrel, Vented Bearing, Ball, Mandrel Stripper, Mower Deck Bolt, Shoulder Nut Crownlock / Bracket, Mower Defl ector Cap, Sleeve Spring, Torsion, Defl ector Nut, Push Shield, Defl ector Washer 11/3 x / x 1 Ga Rod, Hinge Screw Thdrol Washer, Spacer Pulley, Mandrel Nut, Toplock, Flanged Bolt Rdhd 3/-1 x 1-3/ Pulley, Idler, Flat Nut Crownlock 3/ Retainer, Spring Brake Assembly Washer,Hardened Idler Arm Assembly Spacer, Retainer Knob RD 3/-1 Plstc Thd Belt Washer /3 x /1 x 1 Ga Spacer, Retainer Stiffener, Idler Arm Screw Thdrol /1-1 x 1/ Rod, Brake, LH Rod, Brake, RH Bolt Carriage Idler Spring Return Idler Retainer Spring Yellow Zinc Washer 9/3 x 3/4 x 10 Ga Cable Clutch Screw Hex Thd Cut 1/4-0 x 1/ Bracket Asm Idler Support Bracket Deck Cable Bracket Asm Suspension Bracket Suspension RF Brace Support Susp. Frt Bracket Suspension LF Head Asm Cable Clutch Mandrel Assembly (Includes Housing, Shaft and Shaft Hardware Only - Pulley Not Included) ReplacementMower,Complete NOTE: All component dimensions given in U.S. inches 1 inch =.4 mm 1

ILLUSTRATED PARTS LIST MFG ID NO CUSTOMER CATALOG NO. P12597 PRODUCT NO Rev TH

ILLUSTRATED PARTS LIST MFG ID NO. 901103900 CUSTOMER CATALOG NO. P19 PRODUCT NO. 90 11 0-39 4010 Rev 1 0.0.0 TH DECALS 3 13 9 1 1 10 11 4 10 1 14 1 1 19 1 3 19-41 Decal, Warning Engine Symbols 3 14 0-0