CertaDrive 60W 24VDC 220/240V

Transcription

1 ertarive LE drivers atasheet ertarive 60W 24V 220/240V The constant voltage driver for LE applications High frequency, compact size and long lifetime. The constant voltage LE drivers, operation with 24V LE module, LE strip and other LE application where need 24V constant voltage. Product features and benefits Applications Quality Optimal performance thanks to the dedicated LE solution Long lifetime, >40,000 hours Safe operation, SELV compliant, omplete protection, overload, short circuit, overheat protection Installation friendly, independent and lass II Q, E, certificate Hotel, partially light the space, living rooms, corridors Retail & shopping mall, cabinet or shelf lighting Restaurant, enhance the ambience, create the mood ecoration, create space and layers, light sculpture We ensure optimum quality regarding: System supplier As manufactures of lamps and gear, Philips ensures that, from the earliest development stage, optimum LE light source and gear performance is designed International supplier Philips LE transformer fully comply with SELV standards, IE , IE

2 Electrical input data Rated input voltage range Vac Performance Rated input voltage range Vac Operational Rated input frequency Hz Performance Rated input frequency Hz Operational Rated input current 0.31 A Rated input power 69.2 W Power factor 0.97 Power factor 0.90 Total harmonic distortion 20 Efficiency 88 Regulation method onstant Voltage 230Vac, 50 load Electrical output data Rated output voltage: 24V Output voltage range V Output current range A Output short-circuit current <10.5 / 5 Ap / Arms Output voltage ripple <300 mvp-p Output power range 60 W Line regulation <3 Load regulation <5 Turn-on delay <1 s Output voltage rise time <50 ms Hold-up time <10 ms Hiccup mode Logistical data Product name ertarive 60W 24V 220V/240V European Order ode Logistic code 12N Pieces per box 20pcs Wiring & onnections Input wire cross-section Solid wire, 300 +/- 10 length Input cable diameter AWG Input wire strip length 9 Output wire cross-section Output cable diameter AWG Output wire strip length 9 Maximum output cable length 1.0 m Solid wire, 300 +/- 10 length ISPR15: between driver and LE module/strip

3 Insulation Insulation Mains LE Mains N/A SELV (double) LE SELV (double) N/A imensions and weight Length (A1) 180 Width (1) 52 Height (1) 32 Fixing hole distance (A2) 167 Fixing hole diameter (2) 4.2 Weight 315 gram A1 A2 2 A1 60W 180 A ±10 9±1 Operational temperatures and humidity river ambient temperature Maximum housing temperature 85 Relative humidity * Noise and hum 20 d river IP rating IP40 *: T he ertarive 60W/24V driver is intended for built-in indoor use only. The driver should not be directly exposed to the elements like snow, water and ice. Non-condensing river is for build-in use

4 Storage temperature and humidity Ambient temperature Relative humidity Non-condensing Rated driver lifetime 45,000 hours river Tamb 45 Lifetime Maximum failures = 10 Features Remark Open load protection Short-circuit protection Overheat protection Indicate max temp to stop driver Overload protection Hot wiring Suitable for insulation class applications II Per IE60598 ertificates and standards Approval marks E / / SELV / / RoHS Inrush current Inrush current Ipeak 28 A Input voltage 230Vac Inrush current Twidth 330 µs Input voltage 230Vac, measured at 50 Ipeak Typical number of drivers Max. 13 pcs M type, mains impedance 200mΩ + 400μH Ipeak Twidth M Rating Relative number of LE drivers * A A *: Please check that cable cross sectional area corresponds with M rating

5 river touch current Typical touch current <0.7 ma peak Acc. IE at 230Vac 50/60Hz LE module contribution not included Surge iunity Mains surge iunity (diff. mode) 1.0 / 0.5 kv / ka L-N, acc. IE Ohm, 1.2/50µs, 8/20µs Mains surge iunity (co. mode) 2.0 kv L/N GN acc. IE Ohm, 1.2/50µs, 8/20µs 2017 Philips Lighting Holding.V. All rights reserved. This document contains information relating to Philips Lighting product portfolio. Note that the information provided is subject to change. Philips Lighting does not give any representation or warranty as to the accuracy or completeness of the information included herein and shall not be liable for any action in reliance thereon. The information presented in this document is not intended as any coercial offer and does not form part of any quotation or contract. Trademarks are the property of Koninklijke Philips N.V., Philips Lighting Holding.V. or their respective owners.