TPC TYPE N21 FEATURES. [Conformable standards] UL1059(2004) File No.E82309 EN Certificate No.B Ground terminal block
|
|
- Norman Summers
- 5 years ago
- Views:
Transcription
1 Ground terminal block TPC TYPE FEATURES The TPC terminal block provides electrical continuity with the mounting rail (TUB) simply by wiring. Common grounding is ensured by connecting a ground wire to a terminal of the TPC unit or by directly grounding with the mounting rail. The TPC type can be mounted to or dismounted from the aluminum rail for each pole without removing the end clamp. The TPC type can be mounted on the same aluminum rail (TUB) as the TU / TX type terminal block (FUJI ELECTRIC INDUSTRY). The TPC type has acquired UL / TUV certification. This product can be safely used for overseas applications. [Conformable standards] UL(00) File No.E EN0-- Certificate No.B The up-screw type terminals can prevent screws from dropping off and reduce the number of wiring steps. N The TPC type uses components conforming to the compliance with hazardous chemical substance control RoHS Directive.
2 SPECIFICATIONS (RATING, PERFORMANCE) TERMINAL NEW PRODUCTS General ratings Item Ratings Certification standards Conformable standards Certification mark Certification organization file No. Operating temperature Storing temperature -0 to + C (no freezing) - to +0 C (no freezing) UL File No. E Relative humidity to 0% (no condensation) Altitude Power frequency withstand voltage Lighting impulse 000m max. V AC for minute ±,000 V, five times for each pole (. µs) EN0-- Certificate No. B Ratings -U TPC--U JIS rating UL rating EN rating Applicable wire (mm ) Applicable wire (AWG) Applicable wire (mm ). (.0 to.) (. to ) to to. (. to.) (. to ) Currentcarrying capacity (A) 0 Terminal screw size M. M Tightening torque (N m)..0. Indicates current-carrying capacity for connection with the largest applicable wire. HOW TO ORDER For assemblies (Orders for single units accepted.) Ex. Use FUJI ELECTRIC INDUSTRY aluminum rail TUB-D (UD) or TUB-F (UF). When one size type assembly - U UD ( units) Punched rail Basic type Unit type No. of units Rail designation Ex. When two size types assembly - U + - U UF Basic type Unit type No. of units Basic type Unit type No. of units Rail designation U-cut rail ( units) TPC- ( units) N
3 Ground terminal block TPC TYPE STANDARD PRODUCTS -U(A) Applicable wire: to.mm (AWG to ) Dimensions Accessories Aluminum rail TPCU E TUM TUB TUL TUC Unit structure TPC--U(0A) Applicable wire:. to mm (AWG to ) Dimensions Accessories Aluminum rail TPCU E TUM TUB TUL TUC TPC- Unit structure ACCESSORIES TPCU-E Order unit: 0 TUL Order unit: 0 M TUC- Order unit: 0,000 Aluminum rail TUB Order unit: TUM- Order unit: 0, N
4 N NEW PRODUCTS TABLE OF ASSEMBLED DIMENSIONS UF- UF-0 UF- UF-0 UF-0 UF- UF- UF- UF- UF- UF-0 UF-0 UF-0 UF- UF- UF- UF- UF-0 UF- UF- UF- UF UF- UF- UF- UF- UF- UF-0 UF- UF- UF- UF- UF- UF-0 UF-0 UF- UF- UF- UF- UF- UF- UF- UF UF- UF- UF-0 UF- UF- UF- UF- UF- UF-0 UF- UF-00 UF- UF- UF- UF-0 UF- UF- UF- UF-0 UF- UF- UF UF-0 UF- UF- UF- UF- UF- UF-0 UF- UF- UF- UF- UF- UF- UF- UF-0 TPC- TPC type assembly on U-cut rail TUB-F type TPC type assembly on punched rail TUB-D type UD- UD- UD- UD- UD- UD- UD- UD- UD- UD- UD- UD- UD- UD- UD- UD- UD- UD- UD UD- UD- UD- UD- UD-0 UD- UD- UD- UD- UD- UD- UD- UD- UD- UD- UD- UD- UD- UD- UD- UD UD- UD- UD- UD- UD- UD- UD- UD- UD- UD- UD- UD- UD- UD- UD- UD- UD- UD- UD- UD UD-0 UD-0 UD- UD- UD- UD- UD- UD- UD- UD- UD- UD- UD- UD- UD- TPC- L P (L-) L P (L-) TERMINAL
5 Ground terminal block TPC TYPE REFERENCE Comparison of ground resistance between TPC type ground terminal block and copper ground bar In comparing the ground resistance between a TPC type ground terminal block mounted on a TUB-F aluminum rail and a copper ground bar, the resulting ground resistance is as follows: (When compared with a copper ground bar with the same cross-section area as the TUB-F rail) TPC type terminal block Approx. m Rail material: A0 Rail cross-section area:. mm ( Rail conductivity: % ). m max. Approx. 0. m To factory ground From equipment ground Between equipment ground terminal and factory ground terminal: approx. to 0 m When the terminal block is mounted on the TUB-D (punched rail), the ground resistance is approx. to m. Copper ground bar. Approx.. m Ground bar material: C0 Rail cross-section area:. mm ( Rail conductivity: % ) To factory ground From equipment ground Between equipment ground terminal and factory ground terminal: approx.. m Conductor resistance calculation formula R= R S ( : Volume resistivity < -m>, S: Cross-section area, R: Length) Principal parts list Component name Material Remarks Unit (Green or yellow) Terminal Base plate Terminal screw Spring Alminum rail Modified PPE resin (Polyphenylene ether) Flame-retardance: UL V-0, Oxygen index: or more, Tracking resistance: Brass Nickel plating Carbon steel Zinc plating (Tri-chromate finished) Carbon steel Zinc plating (Tri-chromate finished) Stainless steel Polycarbonate resin Flame-retardance: UL V-, Oxygen index: or more, Transparent Carbon steel Zinc plating (Tri-chromate finished) Aluminum alloy Polycarbonate resin Flame-retardance: UL HB, Oxygen index: or more ABS resin Oxygen index: or more N
6 RAIL MOUNTING / DISMOUNTING TERMINAL NEW PRODUCTS In addition to mounting the terminal block by sliding it from the end of a rail, it can also be mounted according to the following procedure: Quick mounting / dismounting Mounting Hook the unit on the rail and slide it forward. Dismounting Replace the unit and make sure that the brackets on both sides of the unit are engaged in the rail. Connect the wires and tighten the terminals screws with the specified tightening torque. (In this step, the unit is grounded to the rail by the terminal screw tightening force. Do not forget to tighten the screws of unconnected terminals.) Disconnect the wires. Slide the unit forward. Dismount the unit from the rail. PRECAUTIONS () Use the terminal block within the rated conditions. () Since connection mistakes may result in an accident, thoroughly check the wiring. () Before using the terminal block, be sure to check the connection of the lead wire and other abnormalities. () Do not apply stress to connected wires. () Avoid using the terminal block in harsh environments (high temperature, high humidity, dust, corrosive gas, etc.). () Do not use the terminal block in such a way that it is exposed to strong impact or vibration. () Do not splash organic solvent or oil over the terminal block. () To connect the wires, be sure to use crimp terminals. () Tighten the terminal screws with a torque that conforms to the standards. () When mounting or dismounting the terminal block, turn off the power to the terminals. () Be sure to mount the end plates on both ends of the terminal block and fasten the terminal block with the end clamp (including cases where other terminal blocks are mounted on the same aluminum rail.) () For this product, use the aluminum rail (TUB) specified by FUJI ELECTRIC INDUSTRY. Do not use other aluminum rails than those specified. If an unspecified aluminum rail is used, it may cause a grounding failure. () To ensure proper grounding, be sure to tighten the screws on unconnected terminals. () Do not apply surface coating (rust-resistant coating, etc.) to the aluminum rail (TUB). It may cause a grounding failure. N
250V 24V, 30V, 48V, 100 / 110V, 125V, 200 / 220V DC. 11mA. 2,000V AC / 1min. ±4.5kV, 3 times for each pole (1.2 / 50μs)
SEMAPHORE INDICATOR SPECIFICATIONS (RATINGS, PERFORMANCE) Type Specification Rated insulation voltage (Ui) 250V Rated operational voltage 24V, 0V, 48V, 100 / 110V, 125V, 200 / 220V ±15% (24V, 48V, 200
More informationBA Series Terminal Blocks
Quick-mount terminal blocks for mounting on 35-mm-wide DIN rails. Current capacities from A to 00V (600V). Snaps on to 35-mm-wide DIN rails. Wide range of current capacities from A to 00A. Insulation voltage
More informationLED Annunciator Lights. KFE-HD Series
LED Annunciator Lights KFE-HD Series KFE-24HD KFE-11HD KFE-13HD Features A variety of lighting areas, ranging from 8 34mm to 18 42mm are available. Five vivid lighting colors are available: milky white,
More informationHL (AZH) LIMIT SWITCHES
COMPACT SIZE LIMIT SWITCHES LIMIT SWITCHES U L PRODUCT TYPE 1. Limit Switches Actuator Type Push plunger Roller plunger Cross roller plunger Panel mount push plunger Panel mount roller plunger Panel mount
More informationHL (AZH) Limit Switches
COMPACT SIZE LIMIT SWITCHES HL (AZH) Limit Switches Wide selections of actuators, terminals and bodies to meet any application Excellent environmental resistance Die casting caseiec IP67 Plastic caseiec
More informationBA Series Terminal Blocks
Quick-mount terminal blocks for mounting on 35-mm-wide DIN rails. Current capacities from A to 400V (600V). Snaps on to 35-mm-wide DIN rails. Wide range of current capacities from A to 400A. Insulation
More informationHigh Current, Plastic Power Supply Connectors
High Current, Plastic Power Supply Connectors EM Series Attachable to DIN rail Back mount type Front mount type Features. 4-positions with high current capability (three-phase power supply and ground)
More informationMICRO-CON-X 2-7 NEW PRODUCT BULLETIN C708
FEATURES & BENEFITS Up to 7 contacts in compact design IP-67 rating, at the face (when mated) IP-67 molded cable assemblies (when mated) All plastic design is light weight Variety of standard options to
More informationG7L. A High-capacity, High-dielectric-strength Relay Compatible with Momentary Voltage Drops. Application Examples. Model Number Legend
A High-capacity, High-dielectric-strength Relay Compatible with Momentary Voltage Drops No contact chattering for momentary drops up to % of rated. Wide-range AC-activated coil that handles 1 to 1 or to
More informationSPECIFICATION HIGH IMPACT RESISTANT THERMOPLASTIC
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 2095TRWRI 20A 125V Spec TR & WR Gfci Rec Pass & Seymour/Legrand Catalog Number 2095TRWRI Manufacturer Pass & Seymour/Legrand
More informationINSTALLATION RULES for SCS/SENSOR Pt100
INSTALLATION RULES for SCS/SENSOR Pt100 1MN0118 REV. 0 operates with ISO9001 certified quality system TECSYSTEM S.r.l. 20094 Corsico (MI) Tel.: +39-024581861 Fax: +39-0248600783 http://www.tecsystem.it
More informationRU Series Universal Relays
Full featured universal miniature relays Designed with environment taken into consideration Two terminal styles: plug-in and PCB mount Non-polarized LED indicator available on plug-in relays No internal
More informationA 120V BR GFI Recpt. Features. Material, Color, and Finish. Description
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 AllenWatson@elliottelectric.com 2095 20A 120V BR GFI Recpt. Pass & Seymour/Legrand Catalog Number 2095 Manufacturer Pass
More informationHL (AZH) Limit Switches
COMPACT SIZE LIMIT SWITCHES HL (AZH) Limit Switches Compact, high-performance limit switch with superior environmental resistance. Broad lineup covers from die casting cases to economical plastic cases.
More informationPRODUCT SPECIFICATION. Stack Lights. Series.
PRODUCT SPECIFICATION Stack Lights Series www.wernerelektrik.com Light Color Significance... Specifications... Functional Specification... Model Number Structure - Stack Lights... Model Number Selection...
More informationNO NO NO. Standard Interlock Safety Switches HS6B. HS5E-K Key Locking Safety Interlock Switches
Standard Interlock Safety Switches HS6B HS5E-K Key Locking Safety Key features: Head removal detection circuitry. High-security pin tumbler key types are used. Sixteen types of key numbers are available,
More information13.1. Range of Enclosures. KRONECTION Box A 2 for up to 2 pairs. Expert Knowledge. Short survey of the KRONECTION Box A 2 for up to 2 pairs
KRONECTION Box A 2 for up to 2 pairs Short survey of the KRONECTION Box A 2 for up to 2 pairs The KRONECTION Box A 2, which is equipped with connection contacts on the right and left, serves as a line
More informationLED Annunciator Lights. KFE-D8/D8P Series
LED Annunciator Lights KFE-D8/D8P Series Features Point brightness part 1000cd/m 2 or more realized in addition to high visibility point illumination system Terminal screw are pop-up type and wiring saving
More information50,000 cycles minimum, resistive, inductive, tungsten filament lamp load (Fed Spec) 1.753" Depth x " Width x 2.375" Height
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 7842 40A 600V 2P Switch Pass & Seymour/Legrand Catalog Number 7842 Manufacturer Pass & Seymour/Legrand Weight per unit
More informationD4BS. Safety-door Switch. Model Number Structure. Switch D4BS - S Operation Key D4BS - K. Ordering Information
Safety-door Switch Safety-door Switch s Special Operation Key Directly Pulls Apart the Contacts from Each Other and Contributes to the Safety of the Production Site Conforms to EN (TÜV) standards corresponding
More informationFeatures. Emergency Stop Switch A22E. Install in 22-dia. or 25-dia. Panel Cutout. Safety Lock Mechanism to Prevent Misuse.
Switch A22E Install in 22-dia. or 25-dia. Panel Cutout Direct opening mechanism to open the circuit when the contact welds. Safety lock mechanism prevents operating errors. Easy mounting and removal of
More informationD4DS. Safety-Door Switch. Compact Safety Switch Saves Space and is Ideal for a Variety of Doors. H Conforms to EN (TÜV) standards.
Safety-Door Switch Compact Safety Switch Saves Space and is Ideal for a Variety of Doors H Conforms to EN (TÜV) standards. (positive opening mechanism isindicatedonthe switch) H Wide standard operating
More informationSTRAIGHT BLADE PLUGS & CONNECTORS
STRAIGHT BLADE PLUGS & CONNECTORS Quick-thread assembly screws and cord-grip screws come backed-out, ready-to-wire. See-through, thermoplastic terminal chamber for clear view of terminals and wire connections.
More informationRP Instruction Manual
Instruction Manual TDK Lambda BEFORE USING THE PRODUCT Be sure to read this instruction manual thoroughly before using this product. Pay attention to all cautions and warnings before using this product.
More informationDL (AZD1) Mini Limit Switches
COMPACT SIZE LIMIT SWITCES DL (1) Mini Limit Switches (with forced contact opening mechanism) An economic compact limit switch equipped with a forced contact opening mechanism and excellent environment
More informationCompact plastic limit switches with positive opening mechanism
Compact limit switches with positive opening mechanism LJK-N Series Positive opening mechanism Positive opening mechanism meets standards worldwide. A wide variety of actuators is available. The LJK-N
More informationMDual Power Connector
MDual Power Connector Overview Utilizing the efficient high-current design of the PowerBud contact technology, the MDual power connectors carry high power in a small package and features self-aligning
More informationAMP STACK III Modular connection system
III Modular connection system The AMP STACK MARK III 25 pair are designed to mass terminate communication cables of solid copper or aluminum conductor wires ranging from 0.32 to 0.8 mm of diameter, (28
More informationEVS RP6020. Instruction Manual
Instruction Manual TDK Lambda BEFORE USING THE PRODUCT Be sure to read this instruction manual thoroughly before using this product. Pay attention to all cautions and warnings before using this product.
More informationSafety-door Switch. Ordering Information
Safety-door Switch Safety-door Switch s Special Operation Key Positively Pulls Apart the Contacts from Each Other and Contributes to the Safety of the Production Site Special Operation Key prevents mis-operation.
More informationApplications Mill Mill Mill Mill. 9007T Convertible sequence. L100 Fixed sequence. Extra heavy duty contact ratings. Extra heavy duty contact ratings
Selection Guide Severe Duty Mill and Foundry Switches pplications Mill Mill Mill Mill Design 9007T Convertible sequence L0 Fixed sequence L14 Single Cable Pulls Fixed sequence L525 elt Conveyor Fixed sequence
More informationHigh Performance, Microminiature Circular Connectors
High Performance, Microminiature Circular Connectors HR25 Series Mated dimensions 3. 35. Diagrams of Connectors in Combination Solder type plug (HR25-*TP-**) Crimp type plug (HR25-9TP-**C) Solder type
More information56 mm sq. (2.20 inch sq.)
56 mm sq. (2.2 inch sq.) 1.8 /step RoHS Bipolar winding, Lead wire type Unipolar winding, Lead wire type p. 68 Customizing Hollow Shaft modification Decelerator Encoder Varies depending on the model number
More informationHigh Performance, Microminiature Circular Connectors
High Performance, Microminiature Circular Connectors HR25 Series Mated dimensions 3. Diagrams of Connectors in Combination Features Solder type plug (HR25-*TP-**) Crimp type plug (HR25-9TP-**C) 1. Small,
More informationBrake Pack SB50W. Standard AC Motors A-143. Standard AC Motors Intro duction. Brake Pack. AC Speed Control Motors Inverter.
Standard AC SB5W Standard AC Intro duction Induction Reversible Right -Angle Gearheads SB5W AC Speed Control Inverter SB5W US ES2 FE1/FE2 Watertight, Dust-Resistant Torque Accessories Installation A-143
More informationApplication Support. Product Information. Omron STI. Support Engineers are available at our USA headquarters from
Omron STI Application Support Thank you for your interest in Omron STI products. Please contact Omron STI with your application questions. Support Engineers are available at our USA headquarters from 4:00
More informationPressure sensor with built-in amplification and temperature compensation circuit
sensor with built-in amplification and temperature compensation circuit PS-A PRESSURE SENSOR (built-in amplification and temperature compensating circuit) NEW FEATURES 1. Contains built-in amplification
More informationTerminal Blocks. Switching & Controls.
Switching & Controls Selection Guides... 1006 General Purpose... 1007 BN/BNH Modular & Fuse Blocks.. 1007 BN High Current Power Blocks... 1011 BA One Piece /Fuse Blocks & Small Current Power Blocks...
More informationATEX II 2G Ex ib IIC T4 Gb. ATEX II 2D Ex ib IIIC T150 C Db ATEXBEAM
PL-AT800 ATEX II 2G Ex ib IIC T4 Gb ATEX II 2D Ex ib IIIC T150 C Db Version: 20170207/EN INDEX 1. PL-AT800 Description 1 2. Features and Benefits 2 3. Enhanced Performance and Safety Features 3 4. Getting
More informationMCF3 DC86V11CT Inrush-withstand
RoHS Pb Dimensions and construction: (mm) Case: Cover: Terminal substrate metal: Terminal primary plating: Terminal surface plating: Adhesive: Marking: Ceramic Ceramic Copper t=0.1 mm Nickel plated copper,
More informationHinged Safety Door Switch
Hinged Safety Door Switch Polymer housing, IP65, and slow-action contacts with positive opening. Two actuator types are available: Shaft Arm lever Arm lever type can be adjusted to allow a right (180 ),
More informationHEAVY DUTY POWER RELAYS FEATURES
VDE VC HEAVY DUTY POWER RELAYS VC RELAYS Faston terminal Screw terminal mm 9 FEATURES VC power relays are designed for controlling heavy duty loads safely: Contact gap of 3 mm or more -point contacts for
More informationInstallation and Operation Instructions DLP Series
Installation and Operation Instructions DLP Series PRECAUTIONS Figure 1: DLP Dimensions and Hardware REMOVE POWER BEFORE WIRING. NEVER CONNECT OR DISCONNECT WIRING WITH THE POWER APPLIED. DO NOT ALLOW
More informationPRODUCT SPECIFICATION. Foot Switches. Series.
PRODUCT SPECIFICATION Foot 46 Series www.wernerelektrik.com Foot Switch Structures...1 Technical Data...2 Model Number Structure - Foot...3 Dimensions...4 Precautions... Foot WERNERS are Rigorous and tough.
More informationHS1E Series Full Size Interlock Switch with Locking Solenoid
HS1E Series HS1E Series Full Size Interlock Switch with Locking Solenoid HS1E Key features include: Basic unit and solenoid unit in one housing Plastic Housing: Light weight Ease of Wiring: All the terminal
More informationOperation Key D4BS - K Head Mounting Direction F: Four mounting directions possible (front-side mounting at shipping)
Safety-door Switch D4BS The Special Activates a Direct Opening Mechanism to Open the Contacts and Shut Off Control Circuits when Protective Doors Are Opened on Machine Tools or Other Equipment CSM_D4BS_DS_E_6_1
More information2-Color Display High-Precision Digital Pressure Switch Series ZSE40A(F)/ISE40A
2-Color Display High-Precision Digital Pressure Switch Series ZSEA(F)/ISEA New M8 connector type RoHS IP65 Applicable fluid Air, Non-corrosive gas, Non-flammable gas Can copy to up to 10 switches simultaneously.
More informationSafety-door Switch D4NS. Model Number Structure. Model Number Legend
Safety-door Switch D4NS Multi-contact, Labor-saving, Environmentfriendly, Next-generation Safety-door Switch Lineup includes MBB models and three contact models with 2NC/1NC and 3NC contact forms in addition
More informationFuse & Switch. BUCHANAN Terminal Blocks. Product Facts High Density Blocks. Fuse Blocks. Switch Blocks. Common Features of 300 & 0300 Series
Fuse & Switch Product Facts High Density n Fuse and Switch rated 15A and 300V. n High Density 0.36" [9.14] centerline spacing saves panel space; at least 33 circuits per foot. Fuse n Provide in-line circuit
More informationXW Series Emergency Stop Switches
ø ø mm, 4-contact Emergency Stop Switch. Compact size only 37. mm deep behind the panel (screw terminal type 4 mm with terminal cover). eliable Safe break action. The depth behind the panel is only 37.
More informationMCF3 25CT Inrush-withstand
RoHS Pb Dimensions and construction: (mm) Case: End-cap substrate metal: End-cap primary plating: End-cap surface plating: Adhesive: Marking: Ceramic Copper t=0.25 mm Nickel plated, 0.5 μm or more Tin
More informationModel Number Structure
Conductive Level Controller CSM DS_E_1_1 Ideal for level control for industrial facilities and equipment. Outputs can be set to self-hold at or using self-holding circuits. Sensitivity adjustment of operating
More informationS826, S926 Series Dual changeover switches with positive opening operation and wiping contacts Catalogue D26.en
2 Snap-action switches S826, S26 Series Dual changeover switches with positive opening operation and wiping contacts Catalogue D26.en 2 Snap-action switches S826 Series Dual changeover switches with positive
More informationLife PERFORMANCE Catalog listing Standards Structure Electrical performance Mechanical performance Ambient operating conditions Recommende tightening
SPATTER-GUARDED SWITCHES Model LS Effective countermeasures against the adhesion of spatter. UL/CSA/GB(CCC marking)-approved. (excluding some models) ORDER GUIDE Actuator Name Roller lever type Shape Max.
More informationHazardous Location Enclosures INDEX. Hazardous Location Enclosures HAZ-2
Hoffman s new ZonEX ATEX-certified enclosures can be used in Zone 1- and Zone 2-rated applications throughout the world. Our NEMA Type 9 enclosures are designed for use in Class II Division 1 and 2 locations
More informationD4BS CSM_D4BS_DS_E_8_4
Safety-door Switch CSM DS_E_8_4 The Special Activates a Direct Opening Mechanism to Open the Contacts and Shut Off Control Circuits when Protective Doors Are Opened on Machine Tools or Other Equipment
More information3.95mm Pitch Miniature Connector for Secondary Power Supply (Product Compliant to C-UL and TÜV)
.9mm Pitch Miniature Connector for Secondary Power Supply (Product Compliant to C-UL and TÜV) DF Series Full lock function added Full locking mechanism in the inner lock system Mis-insertion protector
More informationTorque Motors 3 W, 6 W, 10 W, 20 W
Torque 3 W, 6 W, 1 W, W Connection Information Technical reference Page G-1 Safety standards Page H- Introduction These torque motors conform to safety standards. By providing an external voltage adjustment
More informationTwo Hand Control Valve
Two Hand Control Valve Series n output is available through synchronized, twohanded operation (within 0.5 s)! Conforming to EN574 RoHS (Interchangeable with XT92-67 ) Example of a basic circuit diagram
More informationSW Tog DP 30A 120/277V Autogrd B&S WH
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 3032W SW Toggle DP 30A 120/277V Autogrd B&S WH Eaton Wiring Devices Catalog Number Manufacturer Description Weight per
More informationHS1E Series Full Size Solenoid Locking Switches
HS1E Series Full Size Solenoid Locking Switches AS-Interface Safety at Work Barriers Enabling Switches Door Interlock Switches X Series E-Stops Overview HS1E features: Basic unit and solenoid unit in one
More informationD4BL. Protective Doors Are Locked Until Machines Completely Stop Operating. Guard Lock Safety-door Switch. Model Number Structure.
Guard Lock Safety-door Switch Protective Doors Are Locked Until Machines Completely Stop Operating A mechanical lock is applied automatically when the Operation Key is inserted. A high level of safety
More informationLead-free glass Nickel plated brass 62 ma 1.25 A Over 1.25 A 3 A Epoxy resin 62 ma less than 1 A. Tube: End-cap: Solder: Adhesive: Marking: 1 A 3 A
RoHS Pb Dimensions and construction: (mm) Tube: End-cap: Solder: Adhesive: Marking: Lead-free glass Nickel plated brass 62 ma 1.25 A Over 1.25 A 3 A Epoxy resin 62 ma less than 1 A 1 A 3 A Sn-0.7Cu Sn-3.0Ag-0.5Cu
More informationDBL distribution blocks 3x1 pole
TECHNICAL DATASHEET 1SNC166019D0201 - CATALOGUE PAGE 1SNC166020S0201 DBL distribution blocks 3x1 pole 84.6 3.33" 25 0.98" 32.5 1.28" 28.2 1.11" 23.5 0.93" 14.7 0.58" 36.3 1.43" 75 2.95" 62 2.44" 50.7 2"
More informationA Metal Head That's. Highly Durable and Provides Long-distance Detection. mm 7(M18 Model) Proximity Sensor with All-stainless Housing E2EF NEW
NEW Proximity Sensor with All-stainless Housing EEF Standard Model (Completely stainless- housing) A Metal Head That's * Highly Durable and Provides Long-distance Detection mm 7(M18 Model) *More than 0
More information10 switches simultaneously. The settings of the master sensor (source of copy) can be copied to the slave sensors. Reducing setting labor
2-Color Display High-Precision Digital Pressure Switch ZSE ISE RoHS ZSE ISE IP65 ZSE40 ISE40 M8 connector type ZSE10 ISE10 ISE70 ZSE80 ISE80 PS ISA3 ISA2 ISE35 Applicable Air, Non-corrosive gas, Non-flammable
More informationCompact plastic limit switches with positive opening mechanism
Compact limit switches with positive opening mechanism LJK-NSeries Positive opening mechanism Positive opening mechanism meets standards worldwide. A wide variety of actuators is available. The LJK-N conforms
More informationCompact / Lightweight 2 Port Solenoid Valve
ompact / Lightweight 2 Port Solenoid Valve /-XF For ir/water ompact / Lightweight resin body (PPS) Weight: 20 g (-XF) RoHS IP65 mm Power consumption 3 W (Standard) 0.5 W (With power-saving circuit) 48
More informationXA Series Emergency Stop Switches (w/removable Contact Block)
XA ø6 XA Series Emergency Stop Switches (w/removable Contact Block) The World s First ø6 mm, 4-contact Emergency Stop Switch. Compact size - only 7.9 mm deep behind the panel. Reliable Safe break action.
More informationModel Number Structure
Power Relay G7J Electromechanical Relays A High-capacity, High-dielectric-strength, Multi-pole Relay Used Like a Contactor Miniature hinge for maximum switching power for motor loads as well as resistive
More informationE2E/E2EQ NEXT Series. Proximity Sensor. Long-distance Detection Prevents Unexpected Facility Stoppages. E2E/E2EQ NEXT Series Model Number Legend
Proximity Sensor Long-distance Detection Prevents Unexpected Facility Stoppages The world's longest sensing distance* Nearly double the sensing distance of previous With high-brightness LED, the indicator
More informationRatings 0402 inch size : Type ERBRD ERBRD R X 0R25 0R3 0R37 0R50 0R75 R00 R25 R50 2R00 2R50 3R00 Rated Current (A)
Micro Chip Fuse Type: ERBRD Features Small size Fast-acting and withstanding in-rush current characteristics RoHS compliant Approved Safety Standards UL248-4 : File No.E94052 c-ul C22.2 No.248-4 : File
More informationInstallation Instructions for Load Management Kit A051C329
Instruction Sheet 12-2014 Installation Instructions for Load Management Kit A051C329 1 Introduction The information contained within is based on information available at the time of going to print. In
More informationFeatures. 2-wire type available. Max. operation distance: 1.5 mm 0.06 in (Stable sensing range 0 to 1.2 mm 0.05 in)
817 Cylindrical Inductive Proximity Sensor SERIES Related Information General terms and conditions... F-3 Glossary of terms...p.1576~ guide... P.781~ General precautions... P.1579~ PHOTO PHOTO panasonic.net/id/pidsx/global
More informationRoHS 2011/65/EU ISO 9001 ISO BS OHSAS 18001:2007 GREEN ELECTRONICS MSP. Terminal Blocks
RoHS 2011/65/EU e3 GREEN ELECTRONICS ISO 9001 ISO 14001 BS OHSAS 18001:2007 MSP Terminal Blocks Functional characteristics Dimensional class: high RoHS 2011/65/EU Standard colour: green Height: 0 21.5
More informationabout us In 2011, Switchcraft was acquired by HEICO Corporation and became part of their Electronic Technologies Group.
table of contents 2 about us 3 custom products circular connectors & cable assemblies 6 en2 0.53 [13mm] od - 2-7 contacts 10 micro-con-x 0.53 [13mm] od - 2-7 contacts 16 en3 0.71 [18mm] od - 2-18 contacts
More informationZero-phase current transformer for F-MPC application. Notification of geometry change in EW Series
To All Customers Rep No. B16002 April 19, 2016 Fuji Electric FA Components & Systems Co., Ltd. Zero-phase current transformer for F-MPC application Notification of geometry change in EW Series Thank you
More informationRating of certified products
Rating Model No. Rated voltage Applicable wire/rated current Tightening torque PT- PT- 0 PT-0 PT-0 PT- 800V 00V 1.mm2 16A 1.mm2 15A A A (8mm2) (50A) 95A 132A 175A 0mm2 2A 3A 2 mm2 A 8mm2 50A 75A 132A 175A
More information0.5 s to 30 h (30 s, 3 min, 30 min, 3 h, 30 h)
Mechatronic Analog Timer H3AM Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or comments. Refer to Warranty and
More informationINSTRUCTION MANUAL MANOSTAR TRANSMITTER EMT1. RoHS READ THE INSTRUCTION MANUAL BEFORE USING. No. TR-EMT1-E08
RoHS READ THE INSTRUCTION MANUAL BEFORE USING INSTRUCTION MANUAL MANOSTAR TRANSMITTER No. TR--E08 1-2-,Nishi-shiriike-cho,Nagata-ku,Kobe,Hyogo 65-001 JAPAN TEL. +81(78)-61-6000 FAX. +81(78)-61-6020 INTRODUCTION
More information2.5mm pitch/disconnectable Crimp style connectors. 1Certified LR R PC board layout (viewed from component side) and Assembly layout
Emboss Tape 2.5mm pitch/disconnectable Crimp style connectors Radial Tape Locking device Solder crack preventive material Low insertion force Insertion guide mechanism Applicable to automatic board mounting
More informationSECTION SECTION. EATON 2014 Arrow Hart Buyers Guide
F SECTION SECTION 1 EATON 2014 Arrow Hart Buyers Guide FSECTION Cam-lok Single Pole Connectivity Table of contents Product selector guide F-3 NEMA rating system F-4 F-series F-5 E1010 F-6 E1012 F-7 F-series
More informationLimit Switch D4D- N. Small, Economical Switch Featuring a Positive Opening Mechanism and Conforming to the CE Mark
Limit Switch Small, Economical Switch Featuring a Positive Opening Mechanism and Conforming to the CE Mark Features positive opening mechanism (NC contacts only) that opens contacts, thus preventing faulty
More informationSmall Limit Switch D4V
Small Limit Switch DV Compact Vertical Models Sized for Asian Standards Compact new design approximately / the size of OMRON vertical Limit Switches. Structure enables the terminal section to be fully
More informationAmphenol Amphenol PCD Shenzhen HVBI High Voltage with Inter-Lock
Amphenol Amphenol PCD Shenzhen HVBI High Voltage with Inter-Lock www.amphenolpcd.com.cn CONTENT HVBI PRODUCT INTRODUCTION............ 2 HOW TO ORDER: RECEPTACLE...... 3 alternate KEYING positions............
More informationData sheet E-DAT subway 9 port GB3 pearl white
Illustrations Dimensional drawing Wiring Page 1/7 See enlarged drawings at the end of document Product specification termination unit for mounting in service outlets for underfloor systems suitable for
More informationCOMPACT SIZE HIGH PRECISION POWER ON-DELAY TIMERS. 10 position
PMH Timers COMPACT SIZE HIGH PRECISION POWER ON-DELAY TIMERS PMH RoHS compliance Features Using a dedicated IC, the operation time variance is.5%. Using the slide, time range switching is easy. Meover,
More informationHS1C Interlock Switches with Solenoid
HSC es with The guard door remains locked until the machine stops completely. With the actuator mounted on the guard door and the interlock switch on the machine, the door is mechanically locked when closed.
More informationMiniature Basic Switches
Miniature Basic Switches V-5000 Series Long-life, high-reliability models with a wide range of applications, from industrial products to household products. A wide range of models is available from high-capacity
More informationR1000/R3000/R4000/R8000 Series
Regulator R/R/R/R Series Compact pressure gauge integrated type : Rc/ to Rc JIS symbol CAD DATA AVAILABLE. Specifications Descriptions R R R R Appearance Working fluid Max. working pressure Withstanding
More information56 mm sq inch sq.
Stepping Motors 56 mm sq. 2.2 inch sq. 1.8 /step Unipolar winding Lead wire type Bipolar winding Lead wire type P.4 Unipolar winding Lead wire type Model number Holding torque at Rated current Wiring Winding
More informationSTRAIGHT BLADE PLUGS & CONNECTORS
STRAIGHT BLADE PLUGS & CONNECTORS Quick-thread assembly screws and cord-grip screws come backed-out, ready-to-wire. See-through, thermoplastic terminal chamber for clear view of terminals and wire connections.
More informationonlinecomponents.com
COMPCT CONNECTOR TERMINL FOR REDUCED WIRING CT-2 CONNECTOR TERMINL ORDERING INFORMTION TYPES RoHS Directive compatibility information http://www.mew.co.jp/ac/e/environment/ CT2: CT-2 connector terminal
More informationKFD / KFT / KFR Series
Incandescent Annunciator Lights KF / KFT / KFR Series KF-27F 27H 27V KF-37F 37H 37V KF-50F 50H Features Available in a variety of lighting panel sizes. 12 indicators (8 flat and 4 diagonal models) ranging
More informationManual Reset Limit Switch
Manual Reset Limit Switch A Series of Pull-reset Models Available Ideal for elevators (EN81), escalators (EN115), and conveyors. Positive opening mechanism insulation approved by TÜV and BIA. and double
More informationSafety design conforming to the following provisions
Safety design conforming to the following provisions of IEC61010. Overvoltage category III 300V AC, pollution degree 2 Overvoltage category II 600V AC/DC, pollution degree 2 Protected throughout by double
More informationø10 A1 Series Miniature Control Units
A1 ø10 A1 Series Miniature Control Short 22-mm-long body miniature control unit series with LED illumination face and snap-action switching. Bright and clear LED illumination. All series have terminals
More informationSignaling Lights LD6A. LD6A LED SignaLight Towers Assembled Products. Unique Striped Design Improves Visibility
Unique Striped Design Improves Visibility Key features of the LD6A LED SignaLight Towers include: The striped design with non-illuminated area between the lenses makes the illuminated color very visible.
More informationOrdering Information. Text Surface-Mounting Signal Relay G6K
Surface-Mounting Relay with the World s Smallest Mounting Area and a Height of Only 5.2 mm ROHS compliant. Sub-miniature model as small as 5.2 (H) x 6.5 (W) x 10 (L) mm is ideal for high-density mounting.
More informationRoHS-Compliant. Watertight, Dust-Resistant Motors FPW Series
RoHS-Compliant Watertight, Dust-Resistant s FPW Series 1 RoHS-Compliant Watertight, Dust-Resistant s FPW Series Induction Type The FPW Series are geared motors which conform to the IEC standard IP67 (Recognized
More information