A38 Massage Chair OPERATION INSTRUCTIONS SAVE THESE INSTRUCTIONS

Transcription

1 A38 Massage Chair OPERATION INSTRUCTIONS SAVE THESE INSTRUCTIONS

2 Thanks for purchasing this product. Please read this manual instruction carefully in order to know how to use this product correctly before operation. Please pay more attention to some important safety warning and keep this manual book properly for future use. Note: Our Company reserves the right to revise the design and description of this product without any further notice. Please refer to the actual color of this product. CONTENTS Safety and maintenance Name and function of components Function Product specification

3 Safety and maintenance Safety and maintenance 1.Important Safety Warning. Don t allow children to touch moveable part of this product. Please use well-grounding power supply suited to this product. Please pull out the plug after use or before cleaning to avoid injury or Damage to the product. Please operate this product according to this manual instruction. Don t use accessories which are not recommended. Don t use this product outdoors. Please read this manual instruction carefully before operation. Any other usage that is not listed in this manual instruction is forbidden. 20 minutes of usage each time is recommended. Please don t use it if the leather is broken or damaged. Please don t use it if the cover or leather is damaged. Please don t use it if the radiator hole is covered or blocked. Please don t drop anything into this product. Please don t fall asleep while using this product. Please don t use it if drunk or feel unwell. Please don t use it within one hour after having meal. Please don t make the massage function too strong for avoiding Injury. 2. Environment for usage. Please don t use it under high temperature and moist environment such as bathroom. Please don t use it immediately while the environmental temperature changes sharply. Please don t use it under heavy-dusty or caustic environment. Please don t use it where there is not enough space or not good ventilation. 3. People who are not suitable to use this product. People who are suffering from osteoporosis are not suitable to use this product. People who are suffering from heart disease or carrying electronic medical equipment such as heart pacemaker are not suitable to use this product. People who are suffering from fever are not suitable to use this product. Pregnant women or women that are in menses period are not suitable to use this product. People who got injured or skin disease are not suitable to use this product. Children under 14-year old or people mentally unbalanced without being Supervised are not allowed to use this machine. People who are told by doctor to have rest or people who feel unwell are not suitable to use this product. People whose bodies are wet are forbidden to use this product. The appliance has a heated surface.persons insensitive to Heat must be careful when using the appliance. Don t damage the wires or change the circuit of this product. Don t use wet cloth to clean the electric parts such as switch and plug. Be away from this product under power cut state to avoid injury if the power comeback suddenly. Stop using this product while it works abnormal, and please consult local agent immediately. Stop using this product if you feel unwell, and please consult health care doctor. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance. If the supply cord is damaged, it must be replaced by the manufacturer, its Service agent or similarly qualified persons in order to avoid a hazard. 5. Maintenance. This product should be maintained by certain appointed agents, users are prohibited to disassemble or maintain by themselves. Please don t forget to cut the power after usage. Don t use this product if the socket looses. If this product will be left unused for long, please curl up the wires and reserve this product in dry and dustless environment. Don t reserve this product under high temperature or near fire and avoid longtime direct sunshine. If the detachable cord / supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a Hazard. Please clean this product by dry cloth. Don t use thinner, benzene or alcohol. The mechanical components of this product are specially designed and made, it is not necessary to be specially maintained. Don t use edged res to thrust this product. Don t roll or pull this product above uneven ground, it should be lifted before moving. Please use it intermittently; don t make this product work continuously for long. 6. Solution of ordinary malfunctions. It is nature movement voice if the motor sounds while in usage. If the controller can t work normally, please check the plug and socket if they are connected strongly and make sure the switch is turned on. If the rated working time is over, the product will automatically activate the poweroff button; If this product works continuously for long, the temperature protector will make the product automatically power-off, it should be used again after half an hour s r est. 4. Safety. Check the voltage if it is suitable to the specification of this product. Don t use wet hand to pull the plug. Don t make water go inside this product to avoid electric shock or cause damage to this product

4 Name and function of components Function Pillow pad 2.Upper arm air bag components 3.Arm air bag components 4.Seat cushion 5.Leg rest frame 6.Foot rest frame 7.Calf stop sealing plate 8.Back rest pad 9.LED colorful mood light 10.Manual controller pocket 11.Armrest 12.Side cover 13.Back cover 14.Manual controller 15.Drive box cover 16.Safety switch 17.Base caster 18.Power line and power plug 19.Power socket 20.Fuse box 21.Power switch 22.Manual controller socket Function Designed with a set of vertically movable,four wheel driven muted intelligentmassage hands Designed with emulation massage methods of shiatsu, kneading, flapping,knocking, simultaneous kneading and flapping Set with the shoulder automatic detection and location Set with characterizedauto massage function: ache-improving, comfort, ease, fast improving experience massage, upper body, lower body six kinds of automatic. Set with memory set on function M1 and M2 Manual massage for the upper body with three options,fixed,partial and overallmassage,with five levels of speed adjustable.in the state of flapping,shiatsu and knocking,the width between the two kneading balls is adjustable with three Levels:wide,medium and narrow.on partial and fixed point,the massage hands can move up and down to adjust the massage point accurately. Air pressure massage function with three modes:full body air pressure,arms (upper arm set with 4 airbags, arm set with 8 airbags),leg set with 16 airbags, three intensity optional. Leg designed with roller massage function at the bottom of foot, two pairs of papillae on toe root rotating massage; on the arch and heel mastoid skin scraping massage. Back heating function: carbon fiber far infrared heat source Armrest side configuration blue LED colorful artistic lamp. Calf rest can extend stepless can fit for different body height Backrest frame down slides used technology to deviate from the wall by keeping zero space, reach the maximum space saving Leg lifting adjusting, the backrest frame lifting adjusting and automatic lay down mode adjustment function L shape back track fitting curves of the body, can realize the zero gravity when back down

5 1.Switch power supply on Diagram of plug in Diagram of the switch position of power supply 2.Start to massage 1). Press power button, massage chair automatically reclining, and start massage. 2). Automatic shoulder position and massage acupressure point detection, waiting for the completion of testing. 3). If there is difference with the massage balls and the actual shoulder position, youcan adjust the up and down button to a suitable position. Shoulder position has 10 grades adjustable.it will run automatic massage if there is noadjustment on shoulder position within 10 seconds Button Description Display Move the massage balls upward to a suitable position Move the massage balls downward to a suitable position High shoulder position suitable shoulder position Low shoulder position Shoulder adjust 4) Choose massage function to massage Memory function massage Press button Upper body / M1 or Lower body /M2 for 3 seconds, then enter into memory massage function M1 or M2, it will revert to the previous memory massage mode. Function Button Display Note: The specific displays referto the actual object of this product! Memory massage Menory Menory 06 07

6 Characterized auto massage Function Button Feature Display Characterized auto massage Deeply massage on acupressure points, effectively alleviate pain Loosen body physique Promote blood circulation Fast to experience all the massage effect (press for 2S, switch to speed press) Massage focus on upper body Massage focus on lower body Auto F1 Auto F2 Auto F3 Auto F0 Auto F4 Auto F5 Function Button Description Display Back Stretch Back Stretch Back Stretch Back Stretch Back Stretch Back Stretch Fixed position (fixed point) massage back and forth Small area (partial area) massage back and forth Overall massage back and forth Upper body massage back and forth Lower body massage back and forth Massage point adjust (in fixed point, partial modes you can adjust the massage position) Massage hand move up Massage hand move down H0 H1 H2 H3 H4 Upper body manual massage, lower body manual massage 1)Upper body manual massage Function Button Adjust Massage Ball Display Shiatsu Knead&flap Speed And Width Speed Air pressure function massage Function Button Description Display Air pressure mode Intensity Three air pressure modes(full body, arm and leg ) for Lower body With three grades adjustable Technique Speed Flap Knead Knock Speed Speed And Width Speed Speed And Width Three Grades Speed Adjustable Other manual function Function Button Description Display Roller Heating Sole roller: sole roller switch, with 3 speed levels available Far infrared back heating, has warm feeling when it start to work 3 minutes later Width Width Three Grades Widths Adjustable 08 09

7 Other manual function Function Button Description Calf rise and drop Calf rest lifting button, press this button, calf restlifting slowly, stop when release it Calf rest decline button, press this button, calf rest decline slowly, stop when release it 4.Armrest disassembly method Note: this method is only use for cannot easy move into small space, such as too small room door, please do not arbitrarily disassemble. Open the master carton, take down the calf rest. (figure 1) Remove the back cushion (note: please ensure the heat wire in the cushion was unplugged before remove). (figure 2) Backrest rise and drop Backrest lifting button, press this button, backrest lifting slowly, stop when release it Backrest decline button, press this button, backrest decline slowly, stop when release it Auto lay down mode with three modes circulation function, when press the button, turn into auto lay downmode. 3.Turn off power, stop massage 1)Press power button during massage progress, all massage function will be stop immediately, the backrest and footrest will return to original position automatically, meanwhile you can set up memory function. After rated working time, all massage functions will be finished, meanwhile you can set up memory function, but backrest and footrest won't return to original position. 2)Memory store function: After rated working time or switch off, the hand controller displays "Memory" and glitter, remind the users whether need to store the massage mode before turn off, you can press the memory function buttons M1 or M2 as you like, store the massage mode. Figure 1 Figure 2 Zip the backrest kneading cloth open completely, put the cloth on the top of chair (note: please remember to prevent the kneading cloth from dirty or damage). ( figure 3) The calf rest decoration cover is card slot design, make an effort to pull it when disassembly. (figure 4) Pull 3) Cut off the power of the whole machine. Figure (Switch power off) Figure 3 Figure 4 Unscrew the 8 screws of front dam-board (NEED NOT unscrew the 4 screws on the bottom). (figure 5) Open the front dam-board, unplug the joint of air pipe and power cord corresponding to armrest. (figure 6) Diagram of the switch position of power supply Power switch method map WARNING Set with safety switch in a power supply box, if there is heavy pressure on power supply box, then forced stop back lying function, prevent hurts peoplewhen lying. Figure 5 Figure

8 . Unscrew the screw on the front-end of armrest (note: the screw is in the side of steel frame). (figure 7). Unscrew the screw on the front-end of armrest (note: be careful not missing the plastic block for fixed). (figure 8) 5.Armrest installation method Connect the air pipe on the back-end of armrest to the upper arm's. (figure 1) Put the air pipe and power cord into the steel frame (avoid the air pipe stuck). (figure 2) Figure 7 Figure 8. Unscrew the screw on the back-end of armrest (note: zip the backrest kneading cloth open completely, you may find it). (figure 9). Gently lift up the front-end of armrest, pull out the buckle. (figure 10) Figure 1 Figure 2 Hook the back-end of armrest on the steel frame (please note there are two, place it on the upper one). (figure 3) Insert the back-end of armrest into the decoration cover of upper arm. (figure 4) Lift up gently Figure 9 Figure 10. Gently pull forward the back-end of armrest to pull out the decoration cover, then lift up the back-end of armrest to pull out the buckle. (figure 11). Unplug the joint of upper armrest air pipe (figure 12), the armrest removed completely. Figure 3 Figure 4 Hook the front-end of armrest on the steel frame and lock the buckle. (figure 5) Gently push the armrest down, double check if the hook well locked. (figure 6) PRESS IT DOWNWARD GENTLY Pull forward gently Figure 11 Figure 12 Figure 5 Figure 6 Put the plastic block between the armrest and calf rest pothook, then tighten the up & down screws. (figure 7) Tighten the screws on the back-end of armrest. (figure 8) 12 Figure 7 Figure 8 13

9 Connect the joint of air pipe and power cord (note: there's marks on the air pipe and size of cable connectors is different, you won't miss it). (figure 9) Pull the calf rest air pipe and power cord through the hole of front dam-board, then tighten the screws of dam-board. (figure 10) 6.Calf installation Install the rotating shaft incalf fixed axis first, noticed the hole should be aligned, so that the R shape pin assembly (chart 1) After calf is connected with the fixed axis aligned, then insert (chart 2) Figure 9 Figure 10 Zip the backrest kneading cloth up. figure 11 Plug the heat plug of the back cushion into the heat hole on the backrest, put the back cushion tidily on the backrest. (figure 12) chart 1 chart 2 Plug R pin, then moved to the other side of the calf, and the plug R pin (chart 3) Finished (chart 4) Figure 11 Figure 12 The calf rest decoration cover is card slot design, make an effort to push it when assembly (note: please keep the cover tight with the side), armrest installation is completed. (figure 13) Push Note chart3 chart4 When the machine under the working state, with lying and calf rest lifting, you could not apply gravity on the calf, to prevent the massage chair does harm to peoplebefore dumping(chart1). Ensure the mechanism hands not in the seat part,otherwise will cause uncomfortable in the Buttock when you seating in the chair( chart2). Figure 13 chart1 chart

10 7.Pillow and backrest pad's dismounting and use manual Using pillows can reduce the kneading massage intensity on shoulder andneck,according to your needs to decide whether the pillow pad is needed(recommend headcushions). Backrest cushion and backrest connected byzipper (1), head cushion and backrest pad connected by thread gluing (2) 9.Method of movement Make sure that all wires are far above the ground, tilt the backrest backward to acertain degree (with the gravity center resting on the wheels), push the chair forwardor backward with your hands and finally resume the chair to the normal position in aslow and gentle manner. Zipper Thread gluing 8.Floor Protection Put the heavy massage chairs on the wood floor for a longtime may damage thefloor, so please place a carpet or other object to avoid this damage. Note:During movementyou must turn off the power switch firstand then unplug the power line and hand controller connecting line Product specification Caution: Do not move the chairs with its wheels on wood floor, rough ground or in anarrow space. Two people are required to lift the chair.during the lifting period, the windscreen and backrest cover grooves as the focal point(please do not lift armrest directly) Model: A38 Name: Massage Chair Rated voltage: V~ 60Hz V~ 50Hz/60Hz Rated power input:150w Rated time: 20Min Safety structure: Class I Material introduction: PVC, PA, steel parts and electric &ele -ctron parts MATERIAL PU LEATHER CLOTH WOOD 16 17