PUMPS AND MOTORS VARIABLE-DISPLACEMENT VANE PUMP HVP VB1 A 10. Features. Cautions on use. Description of the model designation
|
|
|
- Roger Davidson
- 6 years ago
- Views:
Transcription
1 VRIBLE-DISPLCEMENT VNE PUMP HVP VB PUMPS ND MOTORS HVP VB F C HVP VB F C min - /s under no load (L/min), min - t d speed..... Since the pressure and flow are supplied corresponding to load, the power can be. Since the pressure compensating mechanism is provided, the relief valve, unload valve, Please read the Operating Manual The pump cannot be used for water-glycol fluid. Please read the Cautions on Using Pumps and Motors, - and - pages. * It is not compatible with old type HVP-VB-F**-.. to. :. to. MPa : MPa -discharge characteristics : Fixed displacement type discharge (L/min) Mounting method F: Flange type pressure,, /s HVP VB F* C 9 ( position) Rc/... 9 Rc/ discharge.) Mass:.
2 VRIBLE-DISPLCEMENT VNE PUMP HVP VC min - /s ( L/min) Gasket type Flange type HVP VC G B HVP VC F C HVP VC G B HVP VC F C HVP VC G B HVP VC F C. Since the pressure and flow are supplied corresponding to load, the power can be. Since the pressure compensating mechanism is provided, the relief valve, unload valve, Please read the Operating Manual maximum rotating speed, however, becomes, min -.For brand names of water-glycol Please read the Cautions on Using Pumps and Motors, - and - pages. under no load (L/min), min - t d speed. to.. to. :. to. MPa :. to. MPa : MPa -discharge characteristics : Fixed displacement type discharge (L/min) Mounting method G: Gasket type F: Flange type pressure,, /s PUMPS ND MOTORS HVP VC G* B discharge.).... ±. Rc/ counter bore depth. ±. 9.. ±.... adjustment screw.. (CW: Increases. pressure.). Rc/ Rc/ ±. 9. Rc/ ±. M HVP VC F* C discharge.) (CW: Increases pressure.) Rc/ Mass: Mass:.
3 VRIBLE-DISPLCEMENT VNE PUMP HVP VD PUMPS ND MOTORS. Since the pressure and flow are supplied corresponding to load, the power can be. Since the pressure compensating mechanism is provided, the relief valve, unload valve, Please read the Operating Manual maximum rotating speed, however, becomes, min -.For brand names of water-glycol Please read the Cautions on Using Pumps and Motors, - and - pages. (Note) Where the sub-plate is not required, specify -9 at the end of model designation. under no load (L/min) Gasket type Flange type t d speed. to.. to. :. to. MPa :. to. MPa : MPa -discharge characteristics : Fixed displacement type discharge (L/min) Mounting method G: Gasket type F: Flange type pressure HVP VD G* C discharge.).... ±. Rc. 9. Rc/.. Rc/.. counter bore depth. (Rear)..... Rc/ HVP VD F* C. discharge.)... ±. ±. Mass:.. 9. Rc ±. ±. Rc/ M.... Mass:.
4 VRIBLE-DISPLCEMENT VNE PUMP HVP VF HVP VF L B HVP VF L B HVP VF L B HVP VF L9 B HVP VF L9 B HVP VF L9 B HVP VF L B HVP VF L B under no load (L/min), min - t d speed 9. Since the pressure and flow are supplied corresponding to load, the power can be. Since the pressure compensating mechanism is provided, the relief valve, unload valve, Please read the Operating Manual When water-glycol fluid is used, specify G at the end of model designation. For brand names of water-glycol fluid, please consult us. Please read the Cautions on Using Pumps and Motors, - and - pages. pressure Mounting method L: Foot type discharge (L/min). to.. to.. to.. to.. to.. to.,,, :. to. MPa :. to. MPa : MPa -discharge characteristics : Fixed displacement type,,, /s PUMPS ND MOTORS HVP VF L** B 9 Rc/ gauge connection port (Ordinary fill plug) gauge connection port (Ordinary fill plug)..... Rc / Rc / (Ordinary filler plug) 9. ±.. ±... ±. 9 Mass:.
5 VRIBLE-DISPLCEMENT VNE PUMP HVP VG PUMPS ND MOTORS HVP VG G B HVP VG G B HVP VG G B HVP VG G B under no load (L/min), min - t d speed. Since the pressure and flow are supplied corresponding to load, the power can be. Since the pressure compensating mechanism is provided, the relief valve, unload valve, Please read the Operating Manual maximum rotating speed, however, becomes, min -.For brand names of water-glycol Please read the Cautions on Using Pumps and Motors, - and - pages.. to.. to. VP VG G* VP VG G* min - /s min - /s pressure Mounting method G: Gasket type :. to. MPa discharge (L/min) : MPa -discharge characteristics : Fixed displacement type (Note) Where the sub-plate is not required, specify -9 at the end of model designation.,, /s HVP VG G** B discharge.) ±. ± ±. Rc / Rc / Rc/ Mass:
VARIABLE-DISPLACEMENT VANE PUMP (HVP-VB1 SERIES)
VARIABLE-DISPLACEMENT VANE PUMP (HVP-VB1 SERIES) The pump cannot be used for water-glycol fluid. (L/min) Deadhead (kw) at No-load (L/min) 1,200 min 1 At Rated Speed HVP-VB1-F12A2-B 0.8 to 3.5 7 8 12 HVP-VB1-F12A3-B
Pressure Control Valves
efore using the product, please check the Pressure ontrol Valves JIS graphic symbols for hydraulic system Refer to the next page. Features These direct operated control valves can be used as sequence valves,
Reducing Valve/Reducing Valve with Check Valve
Reducing Valve/Reducing Valve with Check Valve Nomenclature JIS graphic symbols for hydraulic system JGB JGBC Features - JGB - - - Applicable fluid code No designation: Petroleum-based hydraulic fluid,
Hydraulic Fluids. Note: For use with hydraulic fluids other than those listed above, please consult your Yuken representatives in advance.
Hydraulic Fluids Fluid Types Any type of hydraulic fluids listed in the table below can be used. Petroleum base oils Use fluids equivalent to ISO VG 32 or VG 46. Use phosphate ester or polyol ester fluid.
FEATURES HBP V - K B 4 (L) - VC1-26A2-A (-G) NAME PLATE I (H)
TOYO PUMP (HBP**) This type of pump consists of a pump and a motor, directly connected in one assembly. Thanks to the configuration of the pump, machining of the motor mounting base and shaft aligning
Flow volume: 2-24 l/min Max differential pressure: 10 bar Applications: Lubrication, circulation and transfer
Screw pump Series LPD Product description Flow volume: 2-24 l/min Max differential pressure: 10 bar Applications: Lubrication, circulation and transfer The LPD pump is used for a number of different fluids:
HYDRAULIC POWER UNITS ENERGY-SAVING HYDRAULIC POWER UNIT-TOYOPAC ECO K 2. Features. Description of the model designation.
ENERGY-SAVING HYDRAULIC POWER UNIT-TOYOPAC ECO Hydraulic circuit D Features. Energy saving by improving the volumetric efficiency of variable displacement vane pump. Space saving and weight reduction by
V Series AXIAL PISTON PUMP ORDER CODE
V Series AXIAL PISTON PUMP ORDER CODE V A 1 R B S - A D X A 1 Customers demand Pump Series V Links Type (only V -18): none - Standard A - SAE A bolts Ma. (cm 3 /n):, 18, 3,, 38, 4,, 7 Pump Control Type
V Series AXIAL PISTON PUMP ORDER CODE
V Series AXIAL PISTON PUMP ORDER CODE V 15 A 1 R B S - A 1 D X A 11 Customers demand Pump Series V Links Type (only V 15-18): none - Standard A - SAE A 2 bolts Ma. Displacement (cm 3 /n): 15, 18, 23, 25,
50T,150T,250F SERIES Fixed Displacement-Single, Double, Combination
T,T,F SERIES Fixed Displacement-Single, Double, Combination Up to 7 MPa ( PSI), 9 cm /rev (. CU.IN./rev) Single Pumps These pumps are widely used as a source of hydraulic power. They combine stable performance
"A" Series Variable Displacement Piston Pumps Single Pump, Pressure Compensator Type
A"A" Series PISTON PUMPS Single Pump, Compensator Graphic Symbol M O Specifications Model s A-FRB- A-FRC/H- A- -R-- - -K- A- -R-- - -K- A- -R-- - -K- A- -R-- - -K- A- R S- A9- R S- A- R S- Geometric Displacement
ISD SO-NB-G105 SO-NB-G85 SO-NB-P46 PV2R1-* - * -RAA-42/4290 PV2R2-* - * -RAA-41/4190 PV2R3-* - * -RAA-31/3190 PV2R4-* - * -RAA-30/3090
Spare Parts List PVR-* - * -RAA-4/4 PVR-* - * -RAA-4/4 PVR-* - * -RAA-/ PVR4-* - * -RAA-/ 4 5 4 6 8 8 6 5 4 Y Section Y-Y Y 6 5 Section - 8 Cartridge Kits Model Numbers PVR-6- * -RAA-4 * PVR-8- * -RAA-4
Compressed air to
G G A S F J 2 N/ S/F Specifications escriptions Cylinder bore size Working fluid mm Max. working pressure MPa Min. working pressure MPa Ambient temperature C Port size Operational stroke length mm Rod
50T,150T,250F SERIES Fixed Displacement-Single, Double, Combination 3
T,T,F SERIES Fixed Displacement-Single, Double, Combination Up to 7 MPa ( PSI), 9 cm /rev (. CU.IN./rev) Single Pumps These pumps are widely used as a source of hydraulic power. They combine stable performance
" " Series Variable Displacement Piston Pumps
" " Series Variable Displacement Piston Pumps AR Axial Port Type AR Side Port Type "AR" series variable displacement pump has been developed which the aim of even further the quientness in operation, smaller
Pressure relief valve, pilot-operated. Type ZDB and Z2DB. Contents. Features. RE Edition: Replaces: 10.05
Pressure relief valve, pilot-operated Type ZDB and ZDB RE 575 Edition: 06- Replaces: 0.05 Size 6 Component series 4X Maximum operating pressure 35 bar Maximum flow 60 l/min H7746 Features Sandwich plate
A Series Variable Displacement Piston Pumps
A Series Variable Displacement Piston Pumps A37 A56 A1637 A16 A10 A Series Variable Displacement Piston Pumps Pump Type Graphic Symbol Geometric Displacement cm 3 /rev 1 5 10 0 50 100 00 300 Maximum Operating
UNLOADING RELIEF VALVES
UNLOADING RELIEF VALVES BUG-6/1 (3/4, 1-1/4) Specifications / Model Number Designation Up to 21 (35 ), L /min (66 ) Pub. E- These valves are used to operate the pumps with minimum load in accumulator circuits
HIGH PRESSURE BAR STOCK BALL VALVES. VB6B Series.
HIGH PRESSURE BAR STOCK BA VAVES VB6B Series www.unilok.com s - VB6B Series Features Pressure rating up to 6000psig (413bar) @21 (70 ) with standard PTFE seats 10000psig (689bar) @21 (70 ) with optional
"AR" SERIES PISTON PUMPS. Variable Displacement-Single Pumps Pressure Compensator Type,AR16 / AR22-FR01
"AR" SERIES Variable Displacement-Single Pumps Compensator Type, / AR-FR1 Up to 1 MPa ( PSI),. cm /rev ( CU.IN./rev) Pub. EC- A Compensator Valve Adj. Screw Spool Control Piston Drain Port Flow Adj. Screw
AR Series Variable Displacement Piston Pumps. AR Series Variable Displacement Piston Pumps. AR Series Variable Displacement Piston Pumps
Variable Displacement Piston Pumps AR Series Variable Displacement Piston Pumps Geometric Displacement Maximum cm 3 /rev Operating Pump Type Graphic Symbol Pressure Page 1 2 5 10 20 50 100 150 MPa Variable
P2060 P2075 P2105 P2145 P3105 P3145
Technical Information Technical Features P2 Series Compact design Low noise level Service friendly Reliable Long-lasting Flexible Easy to install High self-priming speed Technical Data P3 Series P2 Series
VARIABLE DISPLACEMENT PISTON PUMPS
VRIBLE DISPLCEMENT Pump Type "R" Series Variable Displacement Piston Pumps Maximum Operating MPa (PSI) () Geometric Displacement cu. in./rev... cm /rev R R Catalogue No. Pub. EC- "" Series Variable Displacement
Variable displacement axial piston pumps,
Variable displacement axial piston pumps, Edition: 04/04.2000 Replaces: 04/10.99 DISPLACEMENTS From To PRESSURE Max. continuous Max. intermittent Max. peak 29 cm 3 /rev 73 cm 3 /rev 280 bar 315 bar 350
MASTER PRIORITY & TWO-PUMPS-COMBINING VALVE
TWO-PUMPS-COMBINING SVILUPPO APPLICAZION FRENI INDUSTRIALI TWO-PUMPS-COMBINING -- 00.01 MASTER & TWO-PUMPS-COMBINING FUNCTIONING: Two pumps supply oil to the valve. Steering unit of load sensing type is
PROPORTIONAL ELECTRO-HYDRAULIC CONTROLS
H PROPORTIONAL ELECTRO-HYDRAULIC CONTROLS Hydraulic Controls H-3 H-1 E Series Hydraulic Controls Hydraulic Controls Max. Maximum Flow Types KS Graphic Symbols Operating L/min 1 2 3 5 10 20 30 50 100 200
Manual Proportional Directional Control Valve (with Pressure Compensation, Multiple Valve Series)
Manual Proportional Directional Control Valve (with Pressure Compensation, Multiple Valve Series) Hydraulic circuit (Example) AB AB AB X Z P Features hese stacking type multiple control valves are equipped
Specifications VH600. Ambient temperature and operating fluid temperature Operating angle Lubrication. 3 (Closed center) 3/4, 1 3 (Exhaust center)
Hand Valve Series VH Specifications VH VH Fluid Proof pressure Max. operating VH// pressure VH Ambient temperature and operating fluid temperature Operating angle Lubrication Air.5 MPa. MPa MPa 5 to C
5 Port Pilot Operated Solenoid Valve Rubber Seal, Plug-in/Non Plug-in. Standard Specifications. Fluid Operating pressure range
For details about certified products conforming to international standards, visit us at www.smcworld.com. Port Pilot Operated Solenoid Valve Rubber Seal, Plug-in/Non Plug-in Series VFR2 JIS Symbol type
5 Port Solenoid Valve/Direct Poppet. Valve model VK3120. VK3120Y (Low wattage 2W DC) VK3140 VK3140Y (Low wattage 2W DC)
Port Solenoid Valve/Direct Poppet Rubber seal Series VK3000 Nl/min 147 Compact/Width 18 X Length 8 (mm) Low power consumption 4W DC (Standard) 2W DC (Energy saver) Standard copper free specification All
Eaton Char-Lynn Low Speed, High Torque Motors. Orbit motor
Eaton Char-Lynn Low Speed, High Torque Motors Orbit motor Table of Contents Description Page No. H & S Series 3 Features 3 Model code 3 H Series 4-9 Specifications 4 Performance 5 Dimensions and mount
NDJ Series New DAIPACK
DJ Series ew DIPK omenclature DJ - - 0-4 6 7 Model o. DJ: ew DIPK Pump capacity 8: V 8 used ( 8 cm /rev) : V used (4.8 cm /rev) Pressure adjustment range 9: 0.8 to. MPa {8 to kgf/cm } : 0.8 to 7 MPa {8
Proportional Electro-Hydraulic Flow Control and Relief Valves
Ω Ω Proportional Electro-ydraulic Flow ontrol and Relief Valves This flow control and relief valve is an energy-saving valve that supplies the minimum pressure and flow necessary for actuator drive. Since
PZH Series High-Pressure Variable Volume Piston Pump
PZH Series High-Pressure Variable Volume Piston Pump eatures qlong, trouble-free service life Swash plate design ensures long, trouble-free bearing life. wlow-noise, even in the high pressure range High-rigidity
Power Valve: Economy Valve. Standard Specifications. Model VEX55-04
Three functions (pressure regulator, switching valve, and speed controller) are provided by a single valve. The conventional valve combination circuit has been condensed into a single valve. A large capacity
ARL1 Series Piston Pumps. ARL1 Series Piston Pumps. Geometric Displacement. Maximum cm 3 /rev
ARL1 Series Piston Pumps Geometric Displacement Maximum cm 3 /rev Operating Pump Type Graphic Symbol Pressure Page 1 2 5 10 20 50 100 150 MPa ARL1-6 Piston Pump ARL1-8 ARL1-12 7 8 ARL1-16 5 Hydraulic Fluids
HMV/HSV. Manual selector valve. 4-port valve CONTENTS
4-port valve Overview The / series manual selector valves are 4-port valves with a sliding valve method for the main valve. Suitable for operating cylinders of φ0 to φ0. Features Simple ease of operation
HYDRAULIC MOTORS MM APPLICATION OPTIONS CONTENTS GENERAL MOTORS
HYDRAULIC APPLICATION Conveyors Textile machines Mining machinery Machine tools Ventilators Construction plant equipment and access platforms etc. CONTENTS Specification data... 5 Function diagrams...
"AR" SERIES PISTON PUMPS. Variable Displacement-Single Pumps Pressure Compensator Type,AR16 / AR22- FR01 3
"AR" SERIES Variable Displacement-Single Pumps Compensator Type,AR / AR- FR Up to MPa ( PSI),. cm /rev (.5 CU.IN./rev) Pub. EC- A Compensator Valve Adj. Screw Spool Control Piston Drain Port Flow Adj.
Pressure relief valve, pilot operated
Pressure relief valve, pilot operated RE 25764/04.07 Replaces: 2.02 /8 Types ZDBK and Z2DBK Size 0 Component series X Maximum operating pressure 20 bar Maximum flow 80 l/min H4080 Table of contents Contents
Mechanical Booster Pump PRC-A Series, PMB-B, C (M) Series
(Mechanical Booster Pump) Components Division, ULVAC, Inc. Mechanical Booster Pump PRC-A Series, PMB-B, C (M) Series Booster pumps can be used with roughing pumps, such as oil rotary pumps, dry vacuum
Pressure relief valve, pilot operated
Pressure relief valve, pilot operated RE 576/05. Replaces: 0.03 /0 Type ZDB and ZDB Size 0 Component series 4X Maximum operating pressure 35 bar [4600 psi] Maximum flow 00 l/min [6.4 US gpm] H7747 Table
Pressure relief valve, pilot-operated. Type ZDB and Z2DB. Contents. Features. RE Edition: Replaces: 05.11
Pressure relief valve, pilot-operated Type ZDB and ZDB RE 576 Edition: 06- Replaces: 05. Size 0 Component series 4X Maximum operating pressure 35bar [4600 psi] Maximum flow 00 l/min [6.4 US gpm] H7747
Suction Filter with Case. Specifications. Fluid Operating pressure Operating temperature Cover/Case. Model/Rated Flow Rate. Model
Suction Filter with Case FH99 Series RoHS Compact and lightweight The compact and lightweight design employs an aluminum casted housing. Prevents pump cavitation The inlet size is larger than the outlet
Series SY3000/5000/7000
Type20P 5 Port Solenoid Valve ody Ported Manifold ar Stock Type/Flat Ribbon Cable Series SY3000/5000/7000 How to Order Manifold How to Order Manifold ssembly (Example) SS5Y 5 20P 05 Manifold series 3 SY3000
Internet For latest information, PDF catalogs and operation manuals
DJ Series ew DIPK omenclature Features DJ - - 0-4 6 7 Low noise The tank contains the pump and motor inside and functions itself as noise insulation panels to trap noise internally. Low oil temperature
" " Series Variable Displacement Piston Pumps
" " Series Variable Displacement Piston Pumps Compensator Type Constant Power (Torque) Control Type Load Sensing Type Pump Type Graphic Symbol Geometric Displacement cu. in./rev...5 5 5 5 5 cm /rev Maximum
INSTRUMENTATION METERING VALVES. VMT Series.
INSTRUMENTATION METERING VALVES VMT Series www.unilok.com Features Pressure rating up to VMTS series - 2000psig (137bar) VMTL & VMTM series - 1000psig (69bar) Temperature rating from -23 C(-10 F) to 204
PROPORTIONAL VALVES SERVO VALVES. Maximum operating pressure MPa {kgf/cm 2 } Model [Model No.]
![PROPORTIONAL VALVES SERVO VALVES. Maximum operating pressure MPa {kgf/cm 2 } Model [Model No.]](/thumbs/82/85298236.jpg "PROPORTIONAL VALVES SERVO VALVES. Maximum operating pressure MPa {kgf/cm 2 } Model [Model No.]")
J PROPORTIONAL VALVES SERVO VALVES J Model [Model No.] Solenoid pilot operated proportional relief valve [JRP] Solenoid operated proportional relief valve [JRPL] Type C2 solenoid operated proportional
Coolant Valve. Series VNC. Cylinder actuation by pilot air. Wide selection of port size and variations
Coolant Valve ir Operated/xternal Pilot Solenoid Cylinder actuation by pilot air Wide selection of port and variations hreaded type (6 to ) type (3 to ) Low water hammer or details, refer to page 07. Large
exploded drawing parts list 2012 AFTERMARKET spare parts for compressors -
exploded drawing parts list 2012 QUALITY AND SERVICE AT THE BEST PRICE FREEDOM consists in the ability to choose, without constraints, the solution that best suits our objectives and needs. As an INDEPENDENT
FLOW CONTROL VALVES F CONTROL VALVES. Maximum operating pressure MPa {kgf/cm 2 } Model [Model No.] Maximum flow rate L/min. Page
![FLOW CONTROL VALVES F CONTROL VALVES. Maximum operating pressure MPa {kgf/cm 2 } Model [Model No.] Maximum flow rate L/min. Page](/thumbs/96/128760697.jpg "FLOW CONTROL VALVES F CONTROL VALVES. Maximum operating pressure MPa {kgf/cm 2 } Model [Model No.] Maximum flow rate L/min. Page")
F FLOW CONTROL VALVES F FLOW CONTROL VALVES Model [Model No.] Maximum operating pressure MPa {f/cm } Maximum flow rate 5 5 5 Page Flow control valve [SF] 7 {7} F- Flow control valve Flow control valve
Series TMM Axial Piston Motor. Technical Information
Series TMM Axial Piston Motor Technical Information General Description GENERAL DESCRIPTION These motors are designed primarily to be combined with other products in closed circuit systems to transfer
Eaton Char-Lynn Low Speed High Torque Orbit Motor for Swing Drive
Eaton Char-Lynn Low Speed High Torque Orbit Motor for Swing Drive 2 Eaton Char-Lynn Low Speed High Torque Orbit Motor for Swing Drive October 2014 Table of Contents Contents General introduction 4 S series
ALB900 Series. Standard Specifications. Model. Port (Bypass lubrication adapter)
Centralized control of multi-point lubrication Stable oil feeding with a micromist Through the use of a booster, a pressure that is higher than that of the main air passage can be supplied. This difference
Coolant Valve. Air Operated/External Pilot Solenoid
Coolant Valve ir Operated/xternal Pilot Solenoid Cylinder actuation by pilot air Wide selection of port and variations hreaded type (6 to ) lange type (3 to ) Low water hammer or details, refer to page
Variable displacement axial piston pumps,
LVP 04 T E Variable displacement axial piston pumps, Edition: 04/04.2000 Replaces: 04/10.99 DISPLACEMENTS From To PRESSURE Max. continuous Max. intermittent Max. peak 29 cm 3 /rev 73 cm 3 /rev 280 bar
HIGH PRESSURE FORGED MULTI PURPOSE BALL VALVES. VB6F Series.
HIGH PRESSURE FORGED MULTI PURPOSE BALL VALVES VB6F Series www.unilok.com Features Pressure rating up to 6000psig (413bar) @21 (70 ) with standard PCTFE seats Temperature rating from -54 (-65 ) to 177
BENT AXIS PISTON MOTORS SERIES HPM FLANGE ISO HPM. pag.3
ENT XIS PISTON MOTORS SERIES HPM FLNGE ISO 30-2 HPM pag.3 TECHNICL FETURES ENT XIS PISTON MOTORS SERIES HPM FLNGE ISO 30-2 TECHNICL FETURES Displacement cm 3 /rev 12 17 25 34 40 47 55 64 80 90 108 130
Power Valve: Regulator Valve. Specifications. Model VEX Operation type Fluid Max. operating pressure Set pressure Air operated.
Power Valve: Regulator Valve Series 1 Large capacity relief regulator Rapid tank internal pressure setting, air blow, constant pressure supply and driving, balance and driving, steps directional control
Specifications. Model/Rated Flow Rate. Accessory/Option. Differential pressure indicator
Oil Filter FH150 Series RoHS ompact and lightweight The compact and lightweight design employs an aluminum alloy cover. Easy maintenance The element slides into place, making it easy to install and remove.
HYBRID HYDRAULIC O OIL COOLING EQUIPMENT O-1
HYBRID HYDRAULIC O OIL COOLING EQUIPMENT O-1 List of Hybrid Unit Models Various specifications for each model. DAIKIN s lineup provides a variety of functions and capacities depending on the machine type.
Discharge rate* 2 L/min MPa (DE10-1) 37.8 MPa (DE10-7)
D VANE PUMPS D VANE PUMPS Operating pressure MPa {kgf/cm } Maximum Rated Discharge rate* L/min Permissible min Page DS DSP 7 {7} 7 {7} to D- MD Motor pumps incorporating a DSP D-4 DP DP DP DP 7. {7} 4
Where theree are hydraulic transmissions where there are YUCI products
YUCI HYDRAULIC YUCI SERIES HYDRAULIC VALVES Where theree are hydraulic transmissions where there are YUCI products Table of Contents Relief Valves 3 Pressure Reducing Valves, Pressure Reducing and Check
INSTRUMENTATION UNION BONNET VALVES. VU6 Series.
INSTRUMENTATION UNION BONNET VALVES VU6 Series www.unilok.com Features Pressure rating up to 6000psig (413bar) @38 (100 ) Temperature rating from -53 (-65 ) to 232 (450 ) with standard PTFE packing, up
Variable Displacement Open Loop Circuit Axial Piston Pumps. V Series
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES Via M. L. King, 6-41122 MODENA (ITALY) Tel: +39 59 415 711 Fax: +39 59 415 729 / 59 415 73 INTERNET: http://www.hansatmp.it E-MAIL:
Check Valve Series AK How to Order
High flow capacity Low cracking pressure:.2mpa Check Valve Series AK How to Order N AK 2 2 Compact and light weight Area Code Japan, Asia, Nil Australia, UK N U.S.A. 2 4 6 Body size /4 /2 /8 2 /4 3 3/8
Roller gear index table
Roller gear index table model MDF www.pascaleng.co.jp Roller gear index table model MDF Roller gear index table model MDF Support table model MDS 2 Maintenance-free and high speed indexing Rolling transmission
Soft Start-up Valve. AV2000/3000/4000/5000 Series
Soft Start-up Valve V000/000/000/000 Series [Option] C- R- W- C R - W - Start-up valve for low speed air supply to gradually raise initial pressure in an air system and for quick exhaust by cutting off
Hiab Rotators Range 2 6 tonnes
Hiab s Range 2 6 tonnes asic data Hiab s Range 2 3 tonnes Technical data R 30 F Max. load (kg) 3000 Torque (Nm @ MPa) 700 @ 20 Drive type Attachment type Vane Flange Attachment (mm), 140 Max. oil pressure
PISTON PUMPS. A3H Series High Pressure Variable Displacement Piston Pumps. Features. A3H Series Variable Displacement Piston Pumps.
3H Series High Variable EIC--13- Features 1 Control System for Wide Range pplication: 1 Compensator Type 3H Series High Variable 9 Constant Power Control Type 1 Load Sensing Type For these controls system,
Size CC-A Flange Options-B Shaft Options-C Ports Features. SAE A 2 Bolt - (H2) 4 Bolt Magneto (H6) 4 Bolt Square (H4)
Gerolor Motors S Series Size CC-A Flange Options-B Shaft Options-C Ports Features S S S S S S S S2 2 S31 31 S0 0 SAE A 2 Bolt - (H2) 4 Bolt Magneto (H6) 4 Bolt Square (H4) 1.0" Keyed (R) mm Keyed (A) 1.0'
Standard Specifications. Model. Port (Bypass lubrication adapter)
Booster Lube Series 900 Centralized control of multi-point lubrication Stable oil feeding with a micromist Through the use of a booster, a pressure that is higher than that of the main air passage can
Screwpump Series ACD
Screwpump Series ACD Product description Flow volume: 11-45 l/min Max differential pressure: 7 bar Applications: Lubrication, circulation and transfer ACD 1116 GB IMO AB, Telephone: + 46 8 50 622 800,
Circuit of directional control valve and regulator. Simplifying circuit design. Space saving and piping. work eliminated. Automating pressure control
Port Electro-Pneumatic Proportional Valve Series 000/000 Capable of actuating a cylinder and performing analog control of pressurization alone can be used to switch and actuate a cylinder and to perform
BENT AXIS PISTON MOTORS SERIES HPM FLANGE ISO HPM. pag.3
ENT AXIS PISTON MOTORS SERIES HPM FLANGE ISO 3019-2 HPM pag.3 TECHNICAL FEATURES ENT AXIS PISTON MOTORS SERIES HPM FLANGE ISO 3019-2 TECHNICAL FEATURES Displacement cm 3 /rev 12 17 25 34 40 47 55 64 80
V 20 F - 1 P 13 S - 1 A 8H 22 L. Std. cover. 1/2 NPT thd. (V10 only) 3/4 NPT thd. (V20 only) 3/4-16 St. thd. (V10F & V20F) 3/4 16. St. thd.
Model Codes V 2 F - 1 P 13 S - 1 8H 22 L 1 2 3 4 5 6 7 8 9 1 11 12 1 Vane pump 2 Series 1 or 2 3 Integral valve options (Omit if not required) F Flow control & relief P Priority valve & relief 4 Mounting
A Series Variable Displacement Piston Pumps. A16 Type performance characteristics A16 Type Noise level characteristics.
EIC--12- PISTON PUMPS Series Variable Features High efficiency Under the conditions of pressure 16 Kgf/cm² and speed 18 r/min. volumetric efficiency is over 98% and the overall efficiency is over 9%. Low
Standard Accessories for HA
MODEL HA06-322 HA06-322 É 26.5 200 324. Specifications Model HA06-322 38 Max. Throat Depth Punching Capacity (for Mild Steel) Diameter Thickness 2-3/8" (60) 7/8" (22) /2" (3) 76 2 50.5 83 30 4.5 24 60.
Series VP3145/3165/3185
Large flow capacity, small exhaust resistance (Refer to Flow Characteristic table.) Easy conversion to N.C. or N.O. N.C. N.C. X (P) N.O. N.O. X (P) Series VP 3 port Function plate makes it possible to
Micro Mist Separator. Model. Note) 1 8, , , , , 1. Model/Free Standing Type. Model AMD (2B)JIS 10K FF flange
Can separate and remove aerosol state oil mist in compressed air and remove particles such as carbon or dust of more than 0.01 μm. Use this product as a pre-filter for compressed air for precision instruments
V33, VP33, VA33, VDA33, VH36 and VL36 Series for VCH36 Series for CNG/NGV applications Pressures up to 3,000 psig (206 bar) and 6,000 psig (413 bar)
Valves Check Valves V33, VP33, VA33, VDA33, VH36 and VL36 Series for VCH36 Series for CNG/NGV applications Pressures up to 3,000 psig (206 bar) and 6,000 psig (413 bar) No.V336-9 November 2014 Fixed cracking
Specifications VH600. Ambient temperature and operating fluid temperature Operating angle Lubrication. Semi-standard
Hand Valve Series Specifications 0 0 Fluid Proof pressure Max. operating 00/00/00 pressure 0 mbient temperature and operating fluid temperature Operating angle Lubrication ir.5 MPa.0 MPa MPa 5 to C (o
Series VP4 50/4 70. Large Size 5 Port Solenoid Valve Rubber Seal SJ SY SY SV SYJ SZ VF VP4 S0700 VQ VQ4 VQ5 VQC VQC4 VQZ SQ VFS VFR VQ7 VP4
Type of actuation 4 Piping 0 Side ported Bottom ported 4 Without sub-plate Large Size 5 Port Solenoid Valve Rubber Seal Series 50/4 70 Series VP 5 port solenoid valve 5 7 position single position double
TopLobe. Rotary Lobe Pumps
TopLobe Rotary Lobe Pumps TopLobe Thenewgenerationofrotarylobepumps Johnson Pump has developed the TopLobe, a rotary lobe pump with radical design improvements for faster maintenance and easier, more effective
5 Port Air Operated Valve. Specifications. Flow characteristics 1 4/2(P A/B) Cv
5 Port Air Operated Valve Series 000 Model (With sub-plate) Valve model -M5 -M5 3-M5 -M5 --0 --0 --0 --0 3--0 3--0 --0 --0 position 3 position position 3 position Type of actuation Single Double Closed
Instruction Manual (B)
MT-39E-0-A Instruction Manual (B) STP Series Turbomolecular Pumps STP-603/003 Series Pump Specific Information Model name STP-603/003 series Voltage 00-40 Va.c. 00-0 Va.c. STP pump consists of the three-volumed
2.4 HEAVY DUTY SERIES
2 2.4 HEAVY DUTY SERIES CONTENTS PPV102 Ordering Code 2.4.1 Heavy Duty Series 2.4.2 Heavy Duty Series compensator 2.4.3 Standard gear pump models Technical Information 2.4.4 Specifications 2.4.5 Hydraulic
Variable Displacement Open Loop Circuit Axial Piston Pumps AR Series
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES Via M.L. King, 6-41122 MODENA (ITALY) Tel: +39 59 415 711 Fax: +39 59 415 729 / 59 415 73 INTERNET: http://www.hansatmp.it E-MAIL:
IGP /117 ED INTERNAL GEAR PUMPS SERIES 10 OPERATING PRINCIPLE TECHNICAL SPECIFICATIONS HYDRAULIC SYMBOL
00/7 ED IGP INTERNAL GEAR PUMPS OPERATING PRINCIPLE IGP pumps are volumetric displacement pumps with internal gears, available in five sizes, each divided into a range of different displacement. The pumps
HMV/HSV. Manual switching valve. 4 port valve
4 port valve Overview The and Series manual switching value is 4 port valves incorporating a sliding valve for the main valve. This value is suitable for driving cylinders ø0 to ø0. eatures Low sliding
5 Port Air Operated Valve
Port ir Operated Valve Series VF000/000/000 RoHS 22- Series VF000/000/000 Model Selection by Operating Conditions q ir Operated Valve: Single Unit Series Sonic conductance C[dm /(s bar)] Type of actuation
Transmitters: Relay Valve VR4151/4152
Relay Valve VR4151/4152 Appropriate output sequences are affected according to the signal received from the mechanical valve. VR4151 VR4152 Precautions Be sure to read before handling. Refer to pages 5-11-2
A variety of circuits in simple construction Intermediate and emergency stops with a large size cylinder
Power Valve 3 Position Valve Series VEX3 A variety of circuits in simple construction Intermediate and emergency stops with a large size cylinder System construction with VEX Conventional system construction
Pneumatic Valve 4V100 Series
tic Valves Pneumatic Valve 4V100 4V100 Low power consumption exhaust for the pilot and main valve, small size, large flow, good appearance, flexible, can be integrated installation, high wear resistant
Series SV1000/2000/3000/4000
Valve/Sub-plate Type IP67 Compliant Series 000/000/000/000 How to Order C () () () () () () (E) (E) () (E) (E) () () (E) (E) () () (E) (E) () () (E) (E) Type of actuation position single position double
Output flow In l/min at 1500 min
Introduction With thru drive For single and multiple pumps Swash plate type for open circuit 1. New type of swash plate and large servo piston with strong bias spring achieves fast response, reduce the
5 Port Air Operated Valve. How to Order. Port size. (A, B port) R port of VFA3 70 is 1/4.
Port Air Operated Valve Series VFA000 How to Order Body ported single solenoid Foot bracket VFA22 Port size (P, A, B port) 0 8 4 R, R2 port are /8. F Thread type (Including pilot port) F N T Rc G NPT NPTF
YH Series Scroll Compressors With Dual-Compliance For A/C and Chiller
Scroll Compressors With Dual-Compliance For A/C and Chiller Specific Design For A/C and Chiller, Not Only The Scroll Set But Also The Unit, Precise Product-Definition Based On Customer's Need Both Build-in
LM30 Drill Series TECH DATA
DRILLING DEPTH GUIDELINES The figures in these tables have been calculated, based on field experiences, and may be reasonably expected. Actual drilling capacity will depend on in-hole tools and conditions,