Air Distributor Non-Sequential
|
|
|
- Roberta Cannon
- 6 years ago
- Views:
Transcription
1 Air Distributor Non-Sequential Spring Neutral Master Control The Betts air distributor is designed as a corrosion resistant, modular, lightweight and compact air distribution system that can be used to control any sequential or non-sequential air operated valve or vent The distributor body is made from anodized aluminum, with internal parts made from brass and stainless steel with nitrile seals. The individual valve toggle switches are easily accessible for replacement. Push-to-connect fittings are included to allow quick and easy installation with ¼ air lines. The air distributor includes a spring neutral master control valve that allows for the air system to be manually charged and automatically isolates the system from the air supply when the master control is released. Isolation of the air supply allows for more effective emergency shut down by a fusible plug or end of line remote. A pressure wink changes from black to green to indicate the system is charged. The individual compartment toggle valves are used to open and close the emergency valves. The master control valve can be used as a complete system shutdown. If the master control knob is depressed to the detent exhaust position, air is fully vented from the system, shutting down all valves/vents connected to the toggle outlets. 1 Compartment AD ALB 4.25 [108] 1.01 [.46] 2 Compartment AD ALB 5.50 [139.7] 1.34 [.61] 3 Compartment AD ALB 6.75 [171.5] 1.67 [.75] 4 Compartment AD ALB 8.00 [203.2] 2.00 [.91] 5 Compartment AD ALB 9.25 [235] 2.33 [1.06] Section 31 Page 1C
2 Air Distributor Non-Sequential Push-Pull Master Control The Betts air distributor is designed as a corrosion resistant, modular, lightweight and compact air distribution system that can be used to control any sequential or non-sequential air operated valve or vent The distributor body is made from anodized aluminum, with internal parts made from brass and stainless steel with nitrile seals. The individual valve toggle switches are easily accessible for replacement. Push-to-connect fittings are included to allow quick and easy installation with ¼ air lines. The air distributor includes a push-pull master control valve. The push-pull master control is a two position detent valve. Pull the knob out and the system is charged with air. Push the knob in and the air is fully vented from the A pressure wink changes from black to green to indicate the system is charged. The individual compartment toggle valves are used to open and close the emergency valves. The master control valve can be used as a complete system shutdown. If the master control knob is depressed to the detent exhaust position, air is fully vented from the system shutting down all valves/vents connected to the toggle outlets. 1 Compartment AD ALB 4.25 [108] 1.01 [.46] 2 Compartment AD ALB 5.50 [139.7] 1.34 [.61] 3 Compartment AD ALB 6.75 [171.5] 1.67 [.75] 4 Compartment AD ALB 8.00 [203.2] 2.00 [.91] 5 Compartment AD ALB 9.25 [235] 2.33 [1.06] Section 31 Page 1D
3 Air Distributor The Betts air distributor is designed as a corrosion resistant, modular, lightweight and compact air distribution system that can be used to control any sequential or non-sequential air operated valve or vent The distributor body is made from anodized aluminum, with internal parts made from brass and stainless steel with nitrile seals. The individual valve toggle switches are easily accessible for replacement. Push-to-connect fittings are included to allow quick and easy installation with ¼ air lines. The individual compartment toggle valves are used to open and close the emergency valves. 1 Compartment AD ALB 2.25 [57.1].60 [.14] 2 Compartment AD ALB 3.50 [88.9].90 [.41] 3 Compartment AD ALB 4.75 [120.7] 1.20 [.55] 4 Compartment AD ALB 6.00 [152.4] 1.50 [.68] 5 Compartment AD ALB 7.25 [184.1] 1.80 [.82] Section 31 Page 1E
4 Air Distributor Sequential Spring Neutral Master Control The Betts air distributor is designed as a corrosion resistant, modular, lightweight and compact air distribution system that can be used to control any sequential or nonsequential air operated valve or vent The distributor body is made from anodized aluminum, with internal parts made from brass and stainless steel with nitrile seals. The individual valve toggle switches are easily accessible for replacement. Push-to-connect fittings are included to allow quick and easy installation with ¼ air lines. The air distributor includes a spring neutral master control valve that allows for the air system to be manually charged and automatically isolates the system from the air supply when the master control is released. Isolation of the air supply allows for more effective emergency shut down by a fusible plug or end of line remote. Pull and hold the master control knob out to send air to the sequential vapor valves. Once the vapor valves have all opened, the air is returned to the master control and enters the VENT RETURN port. A pressure wink changes from black to green to indicate air is back to the master control from the vents and the system is charged. The individual compartment toggle valves are used to open and close the emergency valves. The master control valve can be used as a complete system shutdown. If the master control knob is depressed to the detent exhaust position, air is fully vented from the system shutting down all valves/vents connected to the toggle outlets. 1 Compartment AD ALB 4.25 [108] 1.35 [.61] 2 Compartment AD ALB 5.50 [139.7] 1.68 [.77] 3 Compartment AD ALB 6.75 [171.5] 2.01 [.92] 4 Compartment AD ALB 8.00 [203.2] 2.34 [1.07] 5 Compartment AD ALB 9.25 [235] 2.67 [1.22] Section 31 Page 1F
5 Air Distributor Sequential Push-Pull Master Control The Betts air distributor is designed as a corrosion resistant, modular, lightweight and compact air distribution system that can be used to control any sequential or non-sequential air operated valve or vent The distributor body is made from anodized aluminum, with internal parts made from brass and stainless steel with nitrile seals. The individual valve toggle switches are easily accessible for replacement. Push-to-connect fittings are included to allow quick and easy installation with ¼ air lines. The air distributor includes a push-pull master control valve. The push-pull master control is a two position detent valve. Pull and hold the master control knob out to send air to the sequential vapor valves. Once the vapor valves have all opened, the air is returned to the master control and enters the VENT RETURN port. A pressure wink changes from black to green to indicate air is back to the master control from the vents and the system is charged. The individual compartment toggle valves are used to open and close the emergency valves. The master control valve can be used as a complete system shutdown. If the master control knob is depressed to the detent exhaust position, air is fully vented from the system shutting down all valves/vents connected to the toggle outlets. 1 Compartment AD ALB 4.25 [108] 1.35 [.61] 2 Compartment AD ALB 5.50 [139.7] 1.68 [.77] 3 Compartment AD ALB 6.75 [171.5] 2.01 [.92] 4 Compartment AD ALB 8.00 [203.2] 2.34 [1.07] 5 Compartment AD ALB 9.25 [235] 2.67 [1.22] Section 31 Page 1G
6 AIR VALVE MASTER CONTROL VALVE The Master Control Valve is a push button type on-off valve, spring loaded to the closed position. It is designed for use when the emergency valve air system is operated with air from the brake Parts List No. Description Req d. Material Part No. 1 Knob 1 Alum AL 2 Stem & Diaphragm 1 Brass 17379BR 3 Perforated Diaphragm 1 Buna-N 17379BN 4 Spring 1 Steel 17379MS Pressure Range.. 0 to 125 PSI Temperature Range. 20 to 225 F Air Flow (CFM to atmos.) Multiply PSI by: 0.60 Four 7 / 32 Dia. Holes on 1 19 / 32 sq. centers Note: All connections 1/4 NPT Description A B C D Material Wt. Assembly No. Master Control Valve 1 1 / / 8 15 / / 4 Steel/Buna-N.8 MC CP-B ATTACH FITTING Assy. No MS INTERFERENCE CONTROL VALVE Assy. No. IC17128BR Used as a mounting device for the fusible and frangible plug. Closes all emergency valves when plunger is actuated by cabinet door or other means. INDUSTRIES, INC. WARREN, PA. Aug 1995 Section 31 Page 3A
7 AIR VALVE MASTER CONTROL VALVE The Master Control Valve is a push button type on-off valve, spring loaded to the closed position. It is designed for use when the emergency valve air system is operated with air from the brake Parts List No. Description Req d. Material Part No. 1 Knob 1 Alum AL 2 Stem & Diaphragm 1 Brass 17379BR 3 Perforated Diaphragm 1 Buna-N 17379BN 4 Spring 1 Steel 17379MS Pressure Range.. 0 to 125 PSI Temperature Range. 20 to 225 F Air Flow (CFM to atmos.) Multiply PSI by: 0.60 Four 7 / 32 Dia. Holes on 1 19 / 32 sq. centers Note: All connections 1/4 NPT Description A B C D Material Wt. Assembly No. Master Control Valve 1 1 / / 8 15 / / 4 Steel/Buna-N.8 MC CP-B ATTACH FITTING Assy. No MS INTERFERENCE CONTROL VALVE Assy. No. IC17128BR Used as a mounting device for the fusible and frangible plug. Closes all emergency valves when plunger is actuated by cabinet door or other means. INDUSTRIES, INC. WARREN, PA. Aug 1995 Section 31 Page 3A
8 AIR VALVE MASTER CONTROL VALVE The Master Control Valve is a push button type on-off valve, spring loaded to the closed position. It is designed for use when the emergency valve air system is operated with air from the brake Parts List No. Description Req d. Material Part No. 1 Knob 1 Alum AL 2 Stem & Diaphragm 1 Brass 17379BR 3 Perforated Diaphragm 1 Buna-N 17379BN 4 Spring 1 Steel 17379MS Pressure Range.. 0 to 125 PSI Temperature Range. 20 to 225 F Air Flow (CFM to atmos.) Multiply PSI by: 0.60 Four 7 / 32 Dia. Holes on 1 19 / 32 sq. centers Note: All connections 1/4 NPT Description A B C D Material Wt. Assembly No. Master Control Valve 1 1 / / 8 15 / / 4 Steel/Buna-N.8 MC CP-B ATTACH FITTING Assy. No MS INTERFERENCE CONTROL VALVE Assy. No. IC17128BR Used as a mounting device for the fusible and frangible plug. Closes all emergency valves when plunger is actuated by cabinet door or other means. INDUSTRIES, INC. WARREN, PA. Aug 1995 Section 31 Page 3A
9 FUSIBLE PLUG Assy. No. FP15003BR FUSIBLE & FRANGIBLE PLUG Assy. No. FP15017BR 212 F Thawing F Thawing of a plug dumps air and closes all emergency valves and air operated vents. Breaking of frangible device or thawing of plug dumps air and closes all emergency valves and air operated vents. CHECK VALVE Assy. No. CK25107BR PRESSURE GAUGE Assy. No. PG16349MS PRESSURE Used in conjunction with hand pump to check return air. No. Description Req. Part No. 1 Body BR 2 Stem BR 3 Sleeve BN 1/8 N.P.T. Fitting INDUSTRIES, INC. WARREN, PA. Jan 1989 Section 31 Page 3B
********************************* Action Not Allowed
Page 232 To Order Call: 1.877.DBL.TANK Valves Betts Hydrolet Valves... 233 Betts Emergency Unloading Fixture... 234 Betts Flush Valve... 234 Betts Rear Head Valve... 234 Betts 3, 4, & 6 Sliding Valve...
Petroleum Manhole Identification
Petroleum Manhole Identification 10 Fill Cover Assy. PAF 406-98 shown FVA8110BAM PAF1000 10 FILL COVER ALUM COLLAR FVA8110SSM PAF1000 10 FILL COVER STEEL COLLAR PPVL710BAB PAF406-98 10 FILL COVER ALUM
16 INSPECTION MANHOLE
16 INSPECTION MANHOLE Clamp Ring Style EASILY INSTALLED LOW MAINTENANCE ECONOMICAL Tiona Inspection Manholes provide quick, safe entrance and exit from your tanks. Heavy gauge metal and welded construction
TABLE OF CONTENTS Tanker Parts Catalog Compilation Betts Industries, Inc.
TA N K E R PA R T S C ATA L O G C O M P I L AT I O N W W W. C B S PA R T S. C A TABLE OF CONTENTS Tanker Parts Catalog Compilation Betts Industries, Inc. Part Number Description Pg # Part Number Description
MANUAL AND MECHANICAL VALVES
INTRODUCTION Humphrey Manual and Mechanical Air Valves feature the exclusive diaphragm-poppet design originated by Humphrey. The design consists of two specially contoured diaphragms mounted to an axial
Chemical Hydraulic Valve Designed for hauling a variety of products U.S. Pat. No. 3,065,949 Patented 1962
Chemical Hydraulic Valve Designed for hauling a variety of products U.S. Pat. No. 3,065,949 Patented 962 Schematic Tel. (84) 723-250 Fax (84) 723-7030 E-Mail: betts@bettsind.com Web Site: www.bettsind.com
Pneumatic Power Valves Series 75/76 Manual, Mechanical, Pneumatic and Electric Valves
Quic-Pics Catalogue Pneumatic Power Valves Series 75/76 Manual, Mechanical, Pneumatic and Electric Valves Contents: Product Line Overviews 2 Manually Operated Valves 5 Pushbuttons 6 Toggle Switch 8 Knob
Bottom Load Adaptors. API Adaptors 891 Series. API Bottom Loading Adaptor L
Bottom Load Adaptors API Adaptors 891 Series API Adaptors are crucial to any API bottom loading system, the API Adaptor is precisely engineered and manufactured to match with a standard API coupler. Much
1/8 NPT (F) 1/8 NPT (F)
Control Valves & Valve Accessories PNEUMADYNE, INC. Catalog 400 Phone 76-559-077 Fax 76-559-0547 Features l Compact size (.5 OAL) l 4 Porting configurations l High flow l Single stem design l Plumbing
2 NPT FILTER REPLACEMENT SCREENS FOR 1 1/4 & 2 FILTERS
ALUMINUM Y FILTERS 50 GPM Rating is with the lowest flow screen with no head loss. 200 PSI Max Working pressure. 80 GPM Rating is with the lowest flow screen with no head loss. 200 PSI Max Working pressure.
1 1/4 NPT FILTER 2 NPT FILTER REPLACEMENT SCREENS FOR 1 1/4 & 2 FILTERS 1 1/4 SCREENS 2 SCREENS. Hole Size Designation 150 Mesh 1M150
ALUMINUM Y FILTERS 50 GPM Rating is with the lowest flow screen with no head loss. 200 PSI Max Working pressure. 80 GPM Rating is with the lowest flow screen with no head loss. 200 PSI Max Working pressure.
Performance Data. Temperature Range. -20 o to 160 o F 26 Hg to 125 psi. C v Flow Rate (scfm) Fill Time Exhaust. Port.
Control Valves & Valve Accessories PNEUMADYNE, INC. Catalog 00 Phone 76-559-077 Fax 76-559-0547 Features Single stem design Compact size Four input options Numerous porting configurations Fully ported
Series 77. Miniature 3/2 Valves PUSH BUTTON TOGGLE LEVER SPRING RETURN WITH DETENT ONE WAY ROLLER ROLLER AIR PILOT FINGER BUTTON BALL PLUNGER
Miniature 3/2 Valves TOGGLE LEVER 77.1130 1/8 77.1131 1/8 ROLLER ONE WAY ROLLER - N/O or N/C application - Aluminum alloy 125 PSI -10 C to 60 C (14 F to 140 F) 77.1132 1/8 77.1133 1/8 BALL PLUNGER AIR
Pneumatic Chemical Metering Pump
Timberline s was designed with the well pumper and the chemical man in mind. Each pump has a simple but rugged design that can be repaired in the field within minutes on the tailgate of a pickup truck.
Product Information. Brass Manifolds. Version A
Product Information Brass Manifolds Version A Introduction Infloor offers a complete line of brass manifolds for radiant heating applications. This guide explains the how the manifolds work, the setup
Hi-Cyclic Magna-Cycle Valves
Magna-Cycle valves are pneumatic 4-way, 2-position directional control models that are air pilot actuated. They contain adjustable permanent magnets in both pilot chambers which detent and hold the spool
M S S * A
16 MaxAir Pneumatic Valves Features Phone 248-583-9070 4-Way Air Solenoid & Pilot Valves 1/4", 3/8" & 1/2" NPT Ports Ideal for packaging, material handling and air motor applications Ideal for double acting
Instrument Pressure Range Standard Body psi max. High Flow Rate Body psi max.
Basic Information All ESP Types Overall Size Length............................ 12 3/4-in. Max. Diameter All Piston Type...................... 2 1/4-in. Max. 2-in. Diaphragm..................... 2 7/8-in.
Model 40 Temperature Bulbs And Connections
Model 40 Temperature Bulbs And Connections Table A. Bulb Lengths (inches) MERCURY ACTUATED ORGANIIQUID ACTUATED APPROX. LENGTH APPROX. LENGTH TEMPERATURE OF BULBS UNCOILED LENGTH OF TEMPERATURE OF BULBS
VFDAVV 1/2 VFDAVV VACUUM VALVES. DIMENSIONS (mm)
VACUUM VALVES VFDAVV VACUUM VALVES Direct acting vacuum valves 12VDC, 24VDC, 110VAC & 230VAC 1/4 & 1/2 Ports Full size high flow orifice 3-way Operation 2-way Operation (plug exhaust port using VFBP-U02)
HYDRAULIC PUMP. INSTALLATION, OPERATION, & MAINTENANCE MANUAL MAINTENANCE MANUAL #: MM-HP Rev. A Page 1 of 12
INSTALLATION, OPERATION, & #: MM-HP001 4-20-09 Rev. A Page 1 of 12 HYDRAULIC PUMP PART NUMBER HP46982ALSL & HP46982SL HYDRAULIC PUMP MM-HP001 Rev. A Page 2 of 12 Table of Contents 1.0 General Page 3 2.0
Control Valves Positioner
Control Valves Positioner HiFlo Valve Positioner Easy calibration Corrosion-resistant cover and base Withstands 150 psi at all parts Two -sided cam for easy field reversibility Optional / NPT for piped
Control Valves Positioner
Control Valves Positioner HiFlo HiFlo Valve Positioner Corrosion-resistant cover and base Easy calibration Withstands 150 psi at all parts Two -sided cam for easy field reversibility Optional / NPT for
Air Preparation Products. For Low Temperature Service. Parker Hannifin Corporation Pneumatic Division Richland, Michigan
Air Preparation Products For Low Temperature Service Catalog -E Miniature R Series R Regulators Miniature Miniature Regulators /8", /" Basic /8" Body R-C Non- R-MC Features Diaphragm operated for fast
Flowrite AP 599 Series
AP 599-2 Flowrite AP 599 Series 12-inch Pneumatic Valve Actuator Description The Flowrite AP 599 Series 12-inch pneumatic valve actuator is designed for use with the Flowrite VF 599 Series valves. This
Evans SS-G & GXL -Series Integrated Stainless Gas Sticks
SS-G & GXL -Series Integrated Stainless Gas Sticks Features G & GXL Series 316SS CF8M Body Construction Cleaned and packaged in cleanroom 2-PC Design G-series allows for isolation and removal of regulator
AS-Interface Installation Manual. ASAHI / AMERICA, Inc. Thermoplastic Valves and Piping Systems
AS-Interface Installation Manual Page 1 of 9 Rev A April 16, 2003 ASAHI / AMERICA, Inc. Thermoplastic Valves and Piping Systems 35 GREEN STREET PO BOX 653 MALDEN, MA. 02148 AS-Interface Installation Manual
1 1/4 NPT FILTER SIZE DESIGNATION PRICE 2 NPT FILTER REPLACEMENT SCREENS FOR 1 1/4 & 2 FILTERS 1 1/4 SCREENS 2 SCREENS HOLE SIZE DESIGNATION PRICE
ALUMINUM Y FILTERS 50 GPM Rating is with the lowest flow screen with no head loss. 200 PSI Max Working pressure. 80 GPM Rating is with the lowest flow screen with no head loss. 200 PSI Max Working pressure.
ZICO 2070PM1 REV Page 1
QUIC-FLOW Dump Valves Parts and Instruction Manual ZICO 070PM REV. 9-0- Zico dump valves are uniquely designed to stop annoying leakage. A special slotted hinge over the door shifts when in the closed
TECHNICAL DATA CAUTION
Page 1 of 6 1. DESCRIPTION The Viking Model D-2 Accelerator is a quick-opening device, with an integral anti-flood assembly, used to increase the operating speed of a differential type dry pipe valve.
MODEL D ELECTRIC TWO-STAGE HYDRAULIC PUMP
l e s i MADE IN U.S.A. FOR HYDRAULIC w i t h ANS I B4 0. 1 Parts List for: SPX Hydraulic Technologies 5885 11th Street Rockford, IL 61109-3699 USA powerteam.com Tech Services: +1 800 477 8326 Fax: +1 800
Heavy Duty Bench Top Presses
Heavy Duty Bench Top Presses Model: BTP-501 (FOR SINGLE PISTON ROD, 5 BORE, MF1 MOUNT CYLINDERS) Model: BTP-502 (FOR TRA TRIPLE PISTON ROD, 5 BORE, MF1 MOUNT CYLINDERS) Heavy Duty Bench Top Press shown
Sentronic LP IO-Link CLASS A 617 Series. Proportional Technology
Sentronic LP IO-Link CLASS A 617 Series Proportional Technology PROPORTIONAL PRESSURE CONTROL: 617 SERIES SENTRONIC LP IO-LINK VERSION ASCO NUMATICS Sentronic LP The Sentronic LP is a highly efficient
Identify and Assemble the Pneumatic Components
Identify and Assemble the Pneumatic Components The 5 Basic Components The Standard GEARS-IDS Pneumatic system is comprised of 5 components. The Reservoir Stores Potential Energy in the form of compressed
M503, M504. M503, M504 Pneumatic Control Box * * Product Data Sheet. Features & Benefits
Product Data Sheet M503, M504 Pneumatic Control Box Rear view showing bulkhead pif s M504-6/CAB 6 compartment control box Features & Benefits Lock and key detail Compact design for flexibility of fitting
Max Series Venturi Vacuum Pump with Pneumatic Blow-off and Silencer
Max Series Venturi Vacuum Pump with Pneumatic Blow-off and Silencer Fastbreak Max Series: VP8X & VP8X-ADJ VP8X-200 VP8X-200M-ADJ Standard Pump: VP8X & VP8X-ADJ air-powered venturi vacuum pumps are trusted
Form No Parts List for: RWP55 RWP55-4 MODEL C HYDRAULIC PUMP AIR DRIVEN WITH REMOTE CONTROL GENERAL ASS'Y SIDE VIEW SECTION A-A
Parts List for: Form No. 000339 RWP55 RWP55-4 MODEL C HYDRAULIC PUMP AIR DRIVEN WITH REMOTE CONTROL GENERAL ASS'Y SIDE VIEW 3 9, 0 4 5 6 6 5 4, 3 9,0 SPX Hydraulic Technologies, Rockford, IL 609 USA powerteam.com
AIR PREPARATION UNITS - ACCESSORIES Accessories - CLAMPS
Accessories - CLAMPS CLAMP for FILTER, LUBRICATOR F13, L13 F14, L14 F15, L15 F17, L17 J L L1 T Inch 1.102 0.216 0.551 0.079 mm 28 5.5 14 2 Inch 1.575 0.256 0.69 0.079 mm 40 6.5 17.5 2 Inch 2.165 0.335
Rotary Plug Valves (PR Series) Catalog 4126-PR Revised, July 2003
Rotary Plug Valves (PR Series) Catalog 4126-PR Revised, July 2003 PR Series Rotary Plug Valves Introduction Parker PR Series Plug Valves provide positive leak tight shut-off, high flow capacity, and quick
Solenoid Valves & Accessories. Cylinder Control Bases. Features. Performance Data. Materials
Valves & Accessories PNEUMADYNE, INC. Catalog 00 Phone 76-559-077 Fax 76-559-057 Features l Controls cylinder extension and retraction l Allows rapid cylinder return l -Way Normally Closed l Quick Exhaust
DESCRIPTION. 10" Square Valve 10" Valve for United Plastics Tank Valve Handle-Complete Assembly Auxilliary Handle Lock less Hardware (see page 12)
QUIC-FLOW MANUAL DUMP VALVE ZICO 070PM REV 3-5- QUIC-FLOW valves are the fastest dumping systems for tankers, bar none, dumping up to 800 GPM. Mounting the valve at the bottom of the tank provides approximately
Intake Air Shut-off Valve
Intake Air Shut-off Valve Model 4261M Overview Diesel run-away is a potential problem that can cause damage to equipment. A diesel engine can run away and self destruct on hydrocarbon vapors, even if the
Pressure Regulators K Series
www.swagelok.com Pressure Regulators K Series Pressure-reducing models Back-pressure models Gas cylinder changeover model Vaporizing models Pressure Regulators, K Series 2 Swagelok K Series Pressure Regulator
FITTINGS CHEST FITTINGS CHEST. Get organized with the Pneuforce Fittings Chest!
FITTINGS CHEST FITTINGS CHEST Get organized with the Pneuforce Fittings Chest! Over 40 Different Compartments Easy Carry Handle Holds and Includes 420 Fittings All threaded Models Have the Unique Pneuforce
Snap-tite Quick Disconnect Couplings for Applications Requiring Virtually No Air Inclusion or Spillage
Snap-tite Quick Disconnect Couplings for Applications Requiring Virtually No Air Inclusion or Spillage 8- Series For Pressures to 0 psi ( bar) 9 Series For Pressures to 0 psi ( bar) Featuring: Low pressure
Data sheet. 2-way solenoid valves with Clip-on coils for neutral liquids and gases. January 2003 DKACV.PD.200.K B1472
Data sheet 2-way solenoid valves with Clip-on coils for neutral liquids and gases January 200 DKACV.PD.200.K.22 520B472 2 DKACV.PD.200.K.22 Danfoss A/S 0-200 Contents 2-way solenoid valves with Clip-on
P-250 Rev. G P.D. Oscillating Piston Flowmeters: 2" Type 4-MT and MTSC Petroleum 2" Type 4D-MT LP Gas. Parts List for Petroleum and LPG Truck Meters
P-250 Rev. G P.D. Oscillating Piston Flowmeters: 2" Type 4-MT and MTSC Petroleum 2" Type 4D-MT LP Gas Parts List for Petroleum and LPG Truck Meters Type 4-MT Air Release 1 15 8 7 9 14 11 16 13 6 17 2 3
87/88 Pneumatic Multi-Spring Diaphragm Actuators
GE Oil & Gas Technical Specifications 05/2013 Masoneilan * Valves 87/88 Pneumatic Multi-Spring Diaphragm Actuators Actuator air action can be changed in the field for increased flexibility and reduced
AIR PREPARATION PRODUCTS. Table of Contents
AIR PREPARATION PRODUCTS Table of Contents Page Air Filters................................................. 5-7 Oil Removal Filters......................................... 8-9 Regulators..............................................
On Demand, Differential Pressure Controls
On Demand, Differential Pressure Controls 20 Series Pulse Controller The Goyen 20 Series Pulse Controller is an advanced microprocessor controller of the cleaning system in reverse pulse filters in pneumatic
CACTUS FLOW PRODUCTS
ADJUSTABLE CHOKES POSITIVE CHOKES CACTUS FLOW PRODUCTS s Adjustable Choke assemblies and Long Nose Heater Choke assemblies are furnished with Hardened Alloy Steel Stems and Seats as Standard Trim for Regular
Series 28 High-Pressure Spring-Loaded Regulator
Description Series 28 is a range of spring-loaded regulators that provide a flow of gas or liquid at controlled. The outlet is substantially unaffected by flow rate but it does drop slightly as the inlet
CV MBC (AFTER SERIAL # )
The by Mi-T-M PARTS LIST FOR CV-1750-0MBC (AFTER SERIAL #10015094) Engine Oil Grade: Above 40 F=SAE 30 Below 40 F=SAE10W-30 Engine Oil Capacity: 20 oz. Pump Oil Grade: Mi-T-M Pump Oil #AW-4085-0016 Pump
Types 1808 and 1808A Pilot-Operated Relief Valves or Backpressure Regulators
Bulletin 71.4 D0163X012 Type 1808 February 17 Types 1808 and 1808A Pilot-Operated Relief Valves or Backpressure Regulators Type 1808 Type 1808A Figure 1. Types 1808 and 1808A Pilot-Operated Relief Valves
ColVic Tanker Fittings
Tanker Fittings tanker fittings for fuel tankers are designed and manufactured by to accepted industry standards. All the fittings have full product and installation support and are available at short
FULL COLOR TAB #12 BTP
FULL COLOR TAB #12 BTP 216 HEAVY DUTY BENCH PRESS BTP - How to MODEL: BTP-501 FOR SINGLE PISTON ROD, 5.00 BORE, MF1 MOUNT CYLINDERS Heavy Duty Bench Top Press shown with 5.00 Bore three (3) Stage Multi-Stage
Dixon Bayco Supertanker Options
Rich Smith 800-640-1540 East Coast - rsmith@dixonvalve.com Dan Burke 800-530-0233 Central States - dburke@dixonvalve.com Steve Allred 800-516-5180 West Coast - sallred@dixonvalve.com Frank Smith 888 537
Electrically operated valves Series MF-04 for manifold mounting, 5/2- and 5/3-way G1/8 360 Nl/min (0.366 Cv)
Series MF-04 for manifold mounting, 5/2- and 5/3-way G1/8 360 Nl/min (0.366 Cv) Order code MF-04-510-HN-442 Series and function (plug pins on top, see pictures) 441 = 12 V DC without plug socket 442 =
Pressure Regulators MS-LR, Inch Series Overview
Pressure Regulators MS-LR, Inch Series Overview High flow rate with minimal pressure drop Suitable for front panel mounting 2 sizes: MS4 grid dimension.6 in, MS6 grid dimension 2.4 in Detailed product
Features: Positive on/ off control Brass construction Nickel plated Port size Panel mount with nuts, 15/ black gray.
toggle valve, on/off Positive on/ off control Panel mount with nuts, 15/32-32 2-way without exhaust: 1100-402-6-BLK 1100-402-6-G gray 3-way with exhaust: 1100-400-6-BLK 1100-400-6-G gray toggle only: $19.00
% ^ ) 4/2 SERIES. Direct Mount. Direct Acting Direct Mount Pilot Valves. Brass or Stainless Steel Bodies 1/4" NPT. Features. Construction.
Direct Acting Direct Mount Pilot Valves Brass or Stainless Steel Bodies /" NPT / 83 Direct Mount Features NAMUR direct mount version of the rugged, dependable 83 Series valves Direct acting, high flow
ANGLE SEAT AIR ACTUATED VALVES 2 Way (2/2)
ANGLE SEAT AIR ACTUATED VALVES 2 Way (2/2) BRASS OR STAINLESS STEEL BODY POLYMER OR METAL ACTUATOR HERION USA Inc. Valve Technology and Systems Brochure N-285 Multi-Accessory Polymer Head versions Increased
Miniature Venturi Vacuum Pump with Pneumatic Blow-off and Silencer
Miniature Venturi Vacuum Pump with Pneumatic Blow-off and Silencer Fastbreak Mini Series: VP0X & VP0X-ADJ VP0X-60 Fastbreak blow-off pump with vacuum cup, spring leveler assembly for rapid part release
37/38 Pneumatic Spring Diaphragm Actuator
GE Oil & Gas Technical Specifications 05/2013 Masoneilan* Valves 37/38 Pneumatic Spring Diaphragm The 37/38 Series actuator is designed to provide high performance, reliability and long service life. Features
BTPSeries. BenchTopPress. Cylinders 95% OFOURCYLINDERSSHIPIN2-3DAYS! ONEDAYRUSHSERVICEAVAILABLEONALLCATALOGEDCYLINDERMODELS!
BTPSeries BenchTopPress& BenchTopPress Page196 Press Page199 95% OFOURCYLINDERSSHIPIN2-3DAYS! ONEDAYRUSHSERVICEAVAILABLEONALLCATALOGEDCYLINDERMODELS! HEAVY DUTY BENCH PRESS BTP - How to MODEL: BTP-501
Flow Limit Safety Shutoff Valves Model 1
Flow Limit Safety Shutoff Valves Model 1 Model 1 Series flow limit safety shutoff valves automatically shutoff all flow from the cylinder when flow exceeds a factory preset level. The Model 1 is normally
Model DFLP Linear Actuator
Features Rugged Long Lasting Construction Dyna-Flo s expert CNC machining process and superior quality parts come together to make DFLP actuators a rugged, long lasting product. DFLP actuators are manufactured
12 SERIES. Product Information. Performance & Specs. All 300 Series S.S. construction. Compact, easy to mount 11" x 9" x 3", weighs only 7lb. 2 oz.
AEPB0 March 2009 2 SERIES 2 Features All 300 Series S.S. construction Compact, easy to mount " x 9" x 3", weighs only 7lb. 2 oz. Mounts in vertical position for easy operation Up to a maximum 5500 PSI
28-1 & 29 Series. Compact, Light Weight Non-Spill Couplings. Compact Couplings for Applications Requiring Minimal Air Inclusion or Spillage
8- & 9 Series Compact, Light Weight Non-Spill Couplings Compact Couplings for Applications Requiring Minimal Air Inclusion or Spillage Both 8- and 9 Series are non-spill, push-to-connect couplings designed
AUTOMATED INDUSTRIAL MACHINE, INC TOGGLE-AIRE DIVISION
The Pneumatic Toggle Press Innovators. Since 1947. AUTOMATED INDUSTRIAL MACHINE, INC TOGGLE-AIRE DIVISION Installation, Operation and Maintenance 10 Ton, 1011RT-PLC Series Bench Presses IMPORTANT It is
B SERIES. Bulletin B-2017
Bulletin B-207 B SERIES Versa Product Company, Inc., 22 Spring Valley Rd., Paramus, NJ 0762 USA Phone: (20) 4-2400 Fax: (20) 4-29 Versa BV, Prins Willem Alexanderlaan 427, 72 GB Apeldoorn, The Netherlands
HIGH PRESSURE BALL VALVES
HIGH PRESSURE BALL VALVES HIGH PRESSURE BALL VALVES TABLE OF CONTENTS Page Description 3 Valve Design 3 Product Features 3 Available Options 3 2-Way with NPT and SAE Connections 4 2-Way with SAE Split
VALVES. FIMCO Code # MFG Part # std $ fp $ fp $
97 VALVES std = standard port fp = full port POLY BOLTED STAINLESS STEEL BOLTS, NUTS & WASHERS Size 5143361 60540 1/2 fp $ 29.29 5143362 60541 3/4 fp $ 29.29 5143363 60542 1 std $ 29.29 5143364 60543 1
Installation Instruction
CIVCON MNIFOLD INSTLLTION MNUL REVISION 5/9/05 PETROLEUM MNIFOLD for TNK TRUCKS Installation Instruction Unit of Knappco, Inc. Phone: 86-74-6600 Fax: 86-74-06 CIVCON MNIFOLD INSTLLTION MNUL REVISION 5/9/05
MN-06. Standardized valve series 3/2-way acc. to NAMUR, 750 Nl/min (0.762 Cv) Technical data for series. Order code MN HN-142
3/2-way Technical data for series Order code -310-HN-142 Series and function Standard coil 1) (with plug socket 28-ST-01) 141 = 12 V DC, 4.2 W 142 = 24 V DC, 4.2 W 152 = 24 V AC, 7/4 VA 156 = 115 V AC,
VALVES std $ fp $ fp $
std = standard port POLY BOLTED STAINLESS STEEL BOLTS, NUTS & WASHERS fp = full port Code No. Part No. Size Price 5143361 60540 1/2 fp $ 29.29 5143362 60541 3/4 fp $ 29.29 5143363 60542 1 std $ 29.29 5143364
SERIES C TYPE VALVES C3 VALVES Port Sizes: Four-Way 5/ UNF or M5 Pneumatic-vacuum to 115 psi (8 bar) (individual valves) Gang mounting (2 or mo
CONDENSED CATALOG CC-2004 SERIES C TYPE VALVES C3 VALVES Port Sizes: Four-Way 5/2 10-32 UNF or M5 Pneumatic-vacuum to 115 psi (8 bar) (individual valves) Gang mounting (2 or more valves) Supply & Exhaust
earth safe Fuel Systems for Critical Power
Point Level Sensors S100 Tank Refill Level Sensor 4/5 Point S101 Tank High level Sensor 3 Point S102 Tank Low Level Sensor 1 Point S103 Tank High Level Vent Sensor Level Transmitters S120 Tank Level Transmitter
3/8 & 1/2 NPT. 4-Way - 5 Ported - 2 Position - Type 2 Use on all 4 Way - 2 Position applications
8 SERIES: /8 Ported Air Valves, A & B SERIES: / Ported Air Valves /8 & /, A, B & 8 Series, & Way; & Position Operation to 50 psi Note! Spring return & spring centered models NOT suitable for dry air service.
WILROY. Operation. Optional Diaphragm Rupture Detection HYDRAULICALLY ACTUATED DIAPHRAGM PUMP
WILROY ATEX Approved HYDRAULICALLY ACTUATED DIAPHRAGM PUMP Williams and Milton Roy have combined technologies to design a pump blending the proven mroy hydraulic by-pass diaphragm design with the Williams
AHEAD OF THE FLOW. Butterfly Valves
CATALOG C-BFV-1201 TM AHEAD OF THE FLOW Butterfly Valves General Index Butterfly Valves WARRANTY..........................................4 BUTTERFLY VALVES..................................5-27 OPTIONS
Installation & Operating Instructions
Installation & Operating Instructions For Dixon Bayco VR6030SQ, VR6035SQ, VR6030SQV and VR6035SQV Air Operated Sequential Vapor Valves For Sales and Service Contact USA: Dixon Bayco USA Chestertown, Maryland
Filters, regulators, and lubricators
Filters, regulators, and lubricators 28 filters 3/8", 1/2", and 3/4" Ports Technical data Polycarbonate bowl Polycarbonate bowl guard Metal bowl Metal bowl sight glass Filter body Manual drain Auto drain
Solenoid Operated Block Valves A2800 Series
Solenoid Operated Block Valves A2800 Series Installation and Parts Liquid Controls An IDEX Fluid & Metering Business Installation: M400-40 Table of Contents Introduction Safety Procedures... 3 A2800 Series
3000 Series filters 3/4" and 1" Ports
38 filters 3/4" and 1" Ports Technical data Metal bowl Metal bowl sight glass Filter body Manual drain Auto drain Standard filter Coalescing filter Seals Filter baffle Aluminum Nylon Aluminum Brass + nitrile
HANDGUNS SPRAYING SYSTEMS NO. AA18-AL SPRAYING SYSTEMS NO. AA143-AL HEAVY DUTY TYPE ROTATING HANDLE CONTROL
PRO SERIES SPRAYING SYSTEMS NO. AA18-AL HANDGUNS 3PT SKID HEAVY DUTY TYPE ROTATING HANDLE CONTROL Handle rotates 360 to operate spray gun valve from shutoff to maximum flow position. As handle is turned,
Part Circle Rotor. New, stainless steel outer trip and its spring. (Post 5/93) Uses eight washers (# 16).
432 Catalog Number 47DR / 47DS / 47DH INTERnal Assembly Part Circle Rotor 1 2 3 4 28 6 31 8 9 7 29 5 18 New, stainless steel outer trip and its spring. (Post 5/93) Uses eight washers (# ). 11 32 33 30
Types 472, 473, 3572, 3573
Instruction Manual Form 1844 May 1998 Types 472, 473, 3572, 3573 Types 472, 473, 3572, 3573 Contents Introduction.............................. 2 Scope of Manual............................. 2 Type Number
PROCESS & AUTOMATED VALVES
Process & utomated Valves HYDC s line of Process and utomated Valves complements our isolation valve knowhow and ability to supply high quality solutions to your valve requirements. 3-1 HV Series Inline
EAGLE SERIES VALVES E3 AND E4 SERIES. A Solenoid coil is available in AC or. B Manual override plunger provides. C Valve body is tapped #10-32 and may
EAGLE SERIES VALVES E3 AND E SERIES A A Solenoid coil is available in AC or DC with LED and plug-in connector or wire leads. B Manual plunger provides valve actuation with no electrical power. B C Valve
Series 105 Simplex Strainer Cast Iron Swing Bolt O-Ring Closure, Flanged Connection Class 125 ANSI Flat Face Flange Rating VENT 'A' FLOW
Series 105 Simplex Strainer Cast Iron Swing Bolt O-Ring Closure, Flanged Connection Class 125 ANSI Flat Face Flange Rating 1/4" NPT VENT 'A' 1/4" NPT 2 - REQ'D 'D' REQ D FOR BASKET REMOVAL 'B' FLOW 'C'
The Universal Sewer Air Release Valve is designed to permit
Universal Sewer Valves Universal Sewer Valves Valve Function Exhausts air as a pipeline fills, and allows air in as pipeline drains Allows accumulating air to escape while line is in operation Features
Parts / Spares Reference Sheet
Parts / Spares Reference Sheet Graco Husky 3300 Parts 3300A, Aluminum 3 3 5 1a see page 3 1 1 13 1b see page 30 1b 1a 11 1 13 1c 1 1d 3 1 1 15 0 see page 35 3 5 1 Not used on some models. ti1a 3A011H For
0 900 psi Pressure-Reducing Diaphragm Regulator
Instruction Sheet P/N 009506-09 0 900 psi Pressure-Reducing Diaphragm Regulator Description The Nordson 0 900 psi diaphragm regulator reduces high primary pressures to lower secondary pressures. It is
VALVE ASSEMBLY. Form No "A" "A" Parts List for: (1/4 N.P.T.F.-REF.) (1/4 N.P.T.F.-REF.)
Parts List for: Form No. 108100 SPX Corporation 5885 11th Street Rockford, IL 61109-3699 USA Internet Address: http://www.powerteam.com Tech. Services: (800) 477-8326 Fax: (800) 765-8326 Order Entry: (800)
Port Flow Rate/ Function Series Actuators Page Number Size Factor
Section dex Port Flow Rate/ Function Series Actuators Page Number Size Factor 0- Cv = 0.05 Way Modular Solenoid. -. & to Way Manifold /8 NPT Cv = 0. Way, Position Modular /8 NPT Cv = 0.05 Way Hex Solenoid.5.6
8500 Series Three-Way, Two Position, High Pressure Valve
Application: This valve is used for diverting, blending or metering. One port is common while a plug travels from the lower to the upper seat to divert the flow between the upper and lower ports. Ideal
Pneumatic Products st»
» Pneumatic Products » Industry Standouts for Over 50 Years The benefits of an innovative, pneumatic coupling design were solid enough to single-handedly launch CEJN in 1955. This reliable, easy-to-handle
3/8 & 1/2 NPT. with 3/8 and 1/2 NPT ports for 4 Way - 2 & 3 Position see Pg locate counterbores in body to control static squeeze on seals.
8 SERIES /8 Ported Air Valves 1/ Ported Air Valves /8 & 1/ 1, 1A, 1B & 8 Series Note! Spring return & spring centered models NOT suitable for dry air service. Features & Way - Position. Way - &. operator
R1000/R3000/R4000/R8000 Series
Regulator R/R/R/R Series Compact pressure gauge integrated type : Rc/ to Rc JIS symbol CAD DATA AVAILABLE. Specifications Descriptions R R R R Appearance Working fluid Max. working pressure Withstanding