OUTDOOR ENCLOSURES ACCESORIES CATALOG
|
|
|
- Barnard Simon
- 6 years ago
- Views:
Transcription
1 OUTDOOR ENCLOSURES ACCESORIES
2 ACCESSORIES Return TABLE OF CONTENTS Note: Click on the page number or item below to jump to that page. To return to the Table of Contents, click on the header of any page. Table of Contents Decals Locking Devices UPCBD Series Pedestal Mounting Plates TV Series Pedestal Mounting Brackets Ground Bracket Kits Grounding/Bonding Straps Grounding/Bonding Lugs Grommets Miscellaneous Pad-Mounting Brackets Pole Mounting Brackets PT & MS Single-Mount Stakes & 2500 Series Sign Posts Series Signs Mounting Posts RB Series Wire Splicing Connectors Series Cable Caps Cable Guards One-Pair Outdoor Distribution Point Units R66 Block Accessories Covers and Clips Distribution Post One-Pair Testers for Cross-Connect Terminals Test Equipment RLS Activators Special Service Caps Color-Coded Metal Backboards Spray Paint
3 DECALS & Dimensions PART DESCRIPTION HEIGHT WIDTH UP35MY F Caution buried cable decal, Independent, black on yellow, RUS accepted (10 pk) 6" 3" Note: Our adhesive backed pressure sensitive decals are made of vinyl or Mylar with silk-screened print used for identifying equipment closures. UP35MY LOCKING DEVICES TF75 1/4-20 CUP SEMS Bolt TF75 PART F DESCRIPTION 1/4-20 x 51/64 with cupped washer around hex head, mounting bracket and key sold separately USAGE Most telephone pedestals TVHASP F TVHASP replacement hasp (10/pkg) TV40, TV60LP, TV80, TV710, and TV F P29732 F Type can wrench, hex ends are separate pieces molded in plastic, 5" length (yellow) T-handle tamper-proof wrench, 5/16 hexwrench with 15 diameter bolts in recess both ends, 1 per package Finger-type wrench has hex ends for 3/8" and 7/16" nuts and deep sockets for terminal posts Red handle wrench used on tamper-proof cross-connect cabinets, MESA, and CATV enclosures 38 5" Can Wrench TVHASP Replacement Hasp P29732 T-Handle Tamper-Proof Wrench 3
4 ACCESSORIES Return UPCBD SERIES PEDESTAL MOUNTING PLATES PART DESCRIPTION USAGE DPBDKIT345 F Universal mounting plate, terminal block offset mounting bracket 281, 283, 381, 383, 145 and RPT A-Line Series HIACT100* F High activity mounting plate kit UPCBD3, 4 and 5 closures UPCBDS100, UPC600X, UPC1000 series enclosures, RUS accepted DPBDKIT345 Universal Mounting Plate HIACT Series Mounting Plate Kit HIACT300* F High activity mounting plate kit UPCBDS300 series enclosures, RUS accepted SB234 F Stand-off bracket for terminal blocks and loadcoil mounting Term Blocks, 281, 283, 381, 383, 145 and RPT A-Line Series UPCBD2, UPCBD3, and UPCBD4 series closures, RUS accepted OB2 OB34 F F Terminal block offset mounting bracket 281, 283, 381, 383, 145 and RPT A-Line Series Terminal block offset mounting bracket 281, 283, 381, 383, 145 and RPT A-Line Series UPCBD2 series closures; RUS accepted UPCBD3 and UPCBD4 series closures, RUS accepted SB234 Stand-Off Bracket OB2 Mounting Bracket OB5 F Terminal block offset mounting bracket 281, 283, 381, 383, 145 and RPT A-Line Series UPCBD5 series closures, RUS accepted SL1200 F Splice support bars, 1 pkg, 1 lb. UPC1200 and UPCBD7 series closures * Above plates used for mounting BT25 or RLS25 blocks (three per plate), load coils, and repeaters. The HIACT100 has two plates per kit, and the HIACT300 has three plates per kit. OB34 Mounting Bracket OB5 Mounting Bracket SL1200 Splice Support Bars 4
5 TV SERIES PEDESTAL MOUNTING BRACKETS PART DESCRIPTION USAGE L F " equipment mounting bracket with hardware, 1 per package TV40, TV60, TV80, TV104, and TV106 L Mounting Bracket OS F Off-set equipment mounting bracket with hardware, 1 per package TV40, TV60, TV80, TV104, and TV106 AS F Equipment mounting bracket with hardware, 1 per package TV80, TV104, and TV106 SM F Painted cross-slot mounting plate with hardware, 14-3/4" high x 5" wide, 1 per package TV80, TV104, and TV106 LM F Large painted cross-slot mounting plate with hardware, 1 per package TV106 OS Mounting Bracket AS Mounting Bracket SM Mounting Plate LM Mounting Plate 5
6 ACCESSORIES Return GROUND BRACKET KITS GBRBD2 Ground Bracket Kit GBRREA Ground Bracket Kit P36790 Ground Bracket Kit PROGENGNDKIT 4-Position Ground Bar Kit GBREXT Stud-Mount Extension Bracket GRDEXTKIT Channel-Mount Extension Bracket PART DESCRIPTION USAGE GBRBD2 F Ground bracket kit UPCBD2 GBRREA* F Ground bracket kit UPCBD3, 4, and 5 closures, RUS accepted P36790** F Ground bracket kit UPCBD7 PROGENGNDKIT F position ground bar kit ProFORM pedestals GBREXT F Stud-mount extension bracket. Install below isolation bracket. All pedestal closures that use standard shield isolation brackets except for UPCBD2 GRDEXTKIT F Channel-mount extension bracket. Install above insolation bracket. All pedestal closures that use standard shield isolation brackets except for UPCBD2 * Replaces GBRUPCBD. Install with existing mounting hardware. Additional mounting hardware, Catalog Number P39869, may be ordered separately. ** P36790 bracket is used for field rehab when changing from existing series bonding/grounding to shield isolation style. 6
7 GROUNDING/BONDING STRAPS P41545 Tin Plated Bond Braid Strap P51865 Copper Ground Wire Strap P41545 P51865 PART F F DESCRIPTION 6 AWG tin plated bond braid, round, flexible, 20" long with.205 diameter mounting holes for #10 screws Solid 6 AWG copper ground wire, 20" long with.203 diameter mounting holes for #10 screws, 20 per package FBB931 F Bond braid, 9 eyelets, 31" long FBB1448 F Bond braid, 14 eyelets, 48" USAGE All closures All closures All closures, used in series/bonding grounding All closures, used in series/bonding grounding FBB931 Bond Braid Strap FBB1448 Bond Braid Strap GROUNDING/BONDING LUGS PART DESCRIPTION USAGE ALP387 Bonding/Grounding Connector UP5006 Fargo Ground Connector ALP387* F Bronze, electro-tin plate, hex-head bonding/grounding connector UP5006** F Fargo ground connector All closures All closures and UPCBD series closures for RUS, UL 486A, and UL 467 TVSTDGLK F Ground lug kit for classic style pedestals, 1 per package TV40, TV60LP, TV80, TV104, TV106, and TV710 P43197*** F C Service (drop) wire cable shield bondin clamp All closures, 50 per package TVSTDGLK Ground Lug Kit P43197 Bonding Clamp * Above lugs for use in system grounding using 6AWG solid ground wire. ** Above lug for use with shielded service wire. *** For use on shielded or unshielded service wire. 7
8 ACCESSORIES Return GROMMETS SWG & SWGB Rubber Service Wire Grommet TG46 1-1/4" Aerial Top-Entry Grommet TG8 2" Aerial Top-Entry Grommet PART DESCRIPTION USAGE SWG* F Green 3/4" rubber service wire grommet, 50 per pkg, 1 lb. All closures SWGB* F Black 3/4" rubber service wire grommet, 50 per pkg, 1 lb. All closures TG46 F Aerial top-entry grommet, 1 per pkg, 1 lb. with cable strain relief For all closures with 1-1/4" knockouts TG8 F Aerial top-entry grommet, 1 per pkg, 1 lb. with cable strain relief For all closures having 2" knockouts * Temporary service-wire grommet MISCELLANEOUS NSH376 Cable Tie Mounting Clips BPG Nylon Cap Plug P20229X Wire Grooming Clip PART DESCRIPTION USAGE NSH376 F RUS accepted field-installable cable tie mounting clips, 100 per pkg, 1 lb. All closures BPG* F /16" nylon cap plug, 1 lb. All closures P20229X F /4" wire grooming clip for.250 square hole * For use when stake mounting knockout has been removed and not used. Mounting plates in many pedestals, WP, RNV, OBT, MC10, BET, BEF, LC cross-connect, ONUs and R366 & 2391 protected connectors and blocks 8
9 PAD-MOUNTING BRACKETS PART DESCRIPTION USAGE PADMT F Pad-mounting bracket kit for surface mounting on top of pad UPCBDS200, UPCBDS300, UPCBD7, UPC1200 series, TV2400, TV2500, OPFOTV7, OPFOTV8, ECQF/ERLS series closures, RUS accepted PADMT Pad-Mounting Bracket Kit POLE MOUNTING BRACKETS PART DESCRIPTION R51B F Hanger bracket 27" long, aluminum for strand mounted components BUPPM4NG F Metal pole-mounting bracket for 25, 50 and 100 pair BUPNG closures PKGPM Mounting Hardware PKGPM F Metal pole-mounting hardware for all closures, RUS accepted PROPOLEMTG F Metal pole-mounting bracket for ProFORM pedestals PROPOLEMTG Pole-Mounting Bracket R51B Hanger Bracket BUPPM4NG Pole-Mounting Bracket 9
10 ACCESSORIES Return PT & MS SINGLE-MOUNT STAKES PART DESCRIPTION USAGE Single Mount Stakes PT19G F " stake with hardware, green All closures MS1324 F " stake with hardware, green Pedestals and closures MS1332 F " stake with hardware, green Pedestals MS1342 F " stake with hardware, green Pedestals and closures, RUS accepted MS1354 F " stake with hardware, green All closures MS1372 F " stake with hardware, green All closures Stake Mounting Equipment and Hardware UPCBDHDW F Standard stake mounting hardware MS1324, MS1332, MS1342, MS1354 stakes, RUS accepted PKGS* F Single mounting stake hardware DM and PT series stakes Note : Stakes are mill-galvanized steel unless otherwise noted. * Included with DM joint mounting stakes. MS13 Series Single-Mount Stake PKGS Single Mounting Hardware UPCBDHDW Standard Stake Mounting Hardware 10
11 412 & 2500 SERIES SIGN POSTS 13/16" 7/16" 1-11/16" 21/32" 2-27/32" 5-7/32" 9-15/32" 11-5/32" 13-13/32" 14-5/32" 15-21/32" 1-1/32" 13/16" 2-1/8" 1" 2" Description The 412 series and 2500 series sign posts are U-shaped all-purpose sign posts manufactured of heavy gauge mill-galvanized steel, treated with our proprietary gray-green paint for longer life. For additional sign mounting hardware, order ALP358. The 412 series sign posts have a 13/16-inch deep U-channel with combined slotted and round holes spaced at convenient intervals for mounting signs (see diagram on next page). The 2500 series sign posts have a 1-1/32-inch deep U-channel with round holes spaced at 1-inch intervals for mounting signs (see diagram on next page). Vertical mounted sign has vertical mounting center of 10-1/2 inches. Horizontal mounted sign has vertical mounting hole center of 2-1/4 inches. 24" Application The 412 and 2500 series sign posts mount warning signs and cable route signs. 412 Sign Post (signs ordered separately) 412 Series 2500 Series PART DESCRIPTION UP F601990* 412 series post, 72" tall, 5 lbs. UP F602040* 412 series post, 96" tall UP2572 F602170** 2500 series post, 72" tall UP2596 F602180** 2500 series post, 96" tall, 8.2 lbs. * Accepts two 412 signs, one vertical and one horizontal ** Drilling required to mount Vertiv signs 11
12 ACCESSORIES Return 412 SERIES SIGNS Description 1SP41232 (Aluminum) The 412 (4 x 12 inch) series warning signs are available for telephone, CATV, and fiber optic buried cable and cable routes. The telephone and CATV buried cable signs are vertical warning signs available in steel or aluminum. Both steel and aluminum versions have black print over a yellow background, and a clear coating for durability. The steel version has a pressure sensitive label attached to a painted (green) plate. The aluminum version is silk screened onto the plate. The horizontal 412 cable route signs are aluminum and have black print over a yellow background, and a clear coating. Fiber optic cable warning signs are available in aluminum only. These signs have black print over an orange background and a clear coating. 1SP4121 (Aluminum) 1SP41233 (Aluminum) PART DESCRIPTION USAGE 1SP41232 F Cable route sign (yellow) Aluminum 1DC4123 F Buried cable sign, CATV (yellow) Steel 1SP4121 F Buried cable sign, Independent (yellow) Aluminum 1DC41247 F Buried cable sign, CATV (yellow) Aluminum 1SP41233 F Buried cable splice sign (yellow) Aluminum 1SP4121FIBER F Buried fiber optic cable sign, Independent (orange) Aluminum 1DC41247 (Aluminum) 1SP4121FIBER (Aluminum) ALP358 F series sign mounting hardware Additional mounting hardware Note: Mounting hardware is included. 1DC4123 (Steel) 12
13 MOUNTING POSTS Description The mobile home post (MHP) is a heavy-gauge three position U-shaped channel post on which a 3.5 x 20.0-inch adjustable multi-position mounting plate is attached. The mounting plate provides universal mounting slots that will accept a variety of Network Interface Devices and station protectors. The elongated oval service wire holes help eliminate any sharp bending of service wires as they exit from behind the mounting plate to the protector unit. The slots provided in the channel posts are used for cable ties to help secure service wires inside the U-shaped channel. The PMP posts are designed for mounting one or two-pair station protection. The posts are manufactured of heavy gauge mill-galvanized steel, treated with a unique gray-green finishing process for longer life. MHP Mobile Home Post Application The MHP is designed for mounting one or more Network Interface Device or station protector in mobile home parks or anywhere a mobile home trailer is used and buried service wires are used to provide telephone or CATV service. This design replaces our two current mounting posts. PART DESCRIPTION MHP F Multi-position mobile home post, adjustable to 36.5", 42.5" and 48.5" MHP36 F " fixed position mobile home post MHP48 F " fixed position mobile home post PMP38 F Protector mounting post, 38", 3" x 5-1/2" mounting plate PMP50 F Protector mounting post, 50", 3" x 5-1/2" mounting plate PMP Protector Mounting Post Note: MHP will mount one and two pair station protectors and the following network interface devices (NIDs): Keptel Series SNI 1100/ /2200, 4300, 4600, 4600xl - Seicor Series SNI CAC900, 7600, 9600, MLP600, NI2006, ONI200 - Joslyn Series 7005, 7032, TII Series 3610H, 3710H 13
14 ACCESSORIES Return RB SERIES WIRE SPLICING CONNECTORS Description RB wire splicing connectors are available dry or grease filled. They provide 100% electrical crimp splices equivalent to soldered connections on various sizes of solid wire having plastic, pulp, and single-wrapped paper insulation. RB series connectors are used to quickly splice various sizes of insulated, solid copper conductor wires. Application Simply insert a stripped or unstripped wire end (see tables on back for sizes) into the connector and crimp the brass connector shell. The tin-plated phosphor bronze insert contains sharp internal tangs to penetrate wire insulation and create a positive electrical connection. RBD Series RB Wire Splicing Connectors Specifications OF WIRES WIRE SIZE PART DESCRIPTION 4 24 AWG (insulated wires) RBD100PKG F RB wire splicing connectors, package of 100, white 4 22 AWG (insulated wires) RBD1000PKG F RB wire splicing connectors, package of 1000, white 3 20 AWG (insulated wires) RBGD1000PKG F RB wire splicing connectors, pkg. of 1000, grease filled, blue 3 18 AWG (insulated wires) 3 16 AWG (stripped wires) Note: Influenced by thickness of insulation. 14
15 1400 SERIES CABLE CAPS Application These neoprene or TPR caps seal off open cable ends. Caps with air valves retain a nominal air pressure of five to fifteen pounds. The adjustable stainless steel band clamps enable caps to be used effectively on cable.250 inches (6.35 mm) to.500 inches (12.70 mm) smaller than the cap s inside diameter. All caps are 4.0 inches ( mm) long. 1420V 2" Cable Cap With Air Valve PART INSIDE DIAMETER OF CAP With Air Valve 1405V F " (12.77 mm) 1407V F " (19.05 mm) 1410V F " (25.40 mm) 1415V F " (38.10 mm) 1420V F " (50.80 mm) 1430V F " (76.20 mm) Without Air Valve 1405 F " (12.77 mm) 1405V.5" Cable Cap With Air Valve 1407 F " (19.05 mm) 1410 F " (25.40 mm) 1415 F " (38.10 mm) 1420 F " (50.80 mm) 1425 F " (63.50 mm) 1430 F " (76.20 mm) " Cable Cap Without Air Valve 15
16 ACCESSORIES Return CABLE GUARDS KEY FEATURES yflanged edges do not require additional brackets for installation for greater ease of use and installation. yavailable in convenient sizes for application flexibility and ease of installation. ydirect mounting for extended protection. ymade of heavy gauge steel for durability and low maintenance costs. Description U-Guards are strapless flanged u-shaped cable guards, manufactured of heavy gauge steel, with a gray-green finish and.312 x.438 slotted mounting holes. Sold in packages of five. Application U-Guards protect cable mounted along a wall or pole and splice points. Diagrams 4-3/4 yprovided with our proprietary gray-green paint for longer life. 27-1/8 10-5/8 Boot Riser Guard Metal U-Guard UP3758G Steel U-Guard PART DESCRIPTION UGBG F Boot riser guard Steel U-Guards UP758G F /4" ID x 8', green finish UP1258G F /4" ID x 8', green finish UP2258G F /4" ID x 8', green finish UP3258G F /4" ID x 8', green finish UP3758G F /4" ID x 8', green finish UGBG Boot Riser Guard 16
17 ONE-PAIR OUTDOOR DISTRIBUTION POINT UNITS KEY FEATURES ycovers have a stainless bead chain affixed to the mounting brackets to prevent cover loss during servicing. ybrass terminals are corrosion-resistant for long life. Description Outdoor distribution point units feature either aluminum or plastic bases, brass terminals, and drawn aluminum or plastic covers. The mounting brackets are made of formed aluminum. Aluminum covers have a stainless bead chain affixed to the mounting brackets to prevent cover loss during servicing. Application 1-pair outdoor distribution point units are used for open wire circuits and long drop wire runs. The 5500 series are for use on 1-pair open wire, RDW (Rural Drop Wire), or figure 8 service drop applications. PART 5502 F F F DESCRIPTION Pole or cross-arm mounted single-pair distribution point. Aluminum and ceramic base with aluminum cover. Cover is held captive by a chain. Two brass binding posts, nuts, and washers. Pole or cross-arm mounted single-pair distribution point. Resin-filled plastic base and 2 brass binding posts with nuts, and washers. Weather-tight neoprene cover. For use on figure 8; single-pair distribution wire for service drop applications. Phenolic base clamps 5502 Single-Pair Distribution Point 5533 Single-Pair Distribution Point 5591 Single-Pair Distribution Wire 17
18 ACCESSORIES Return R66 BLOCK ACCESSORIES COVERS AND CLIPS Plastic Hinged Covers Plastic hinged covers (R66MHC ) are made for the R66 M series quick-clip terminal blocks, but may also be used on any quick-clip block with a 3.39 inch width (R66MOD, RJ21MOD, R700, or R66M connectorized series). They are available in 10-inch lengths. Color-coding identifies block function at a glance. The standard color is orange. The cover attaches along the fanning strip, securely anchoring it to the block. The cover has a flexible hinge that won't wear out, tear or separate. It also features an erasable write-on surface for making pair identification simple and easy using either a pen or a pencil. Hinged Covers NO. PART NO. DESCRIPTION R66MHCO F Hinged cover for M series blocks, orange plastic, 10" length Note: All covers are UL Listed. RA1 Series Bridging Clips RA1 series stainless steel bridging clips connect adjacent quick-clips on R66 blocks, providing access points for isolating and testing incoming pairs from outgoing pairs. Available in 2, 3 or 4-position configurations, they are reusable and can be easily removed for wiring. Bridging Clips NO. PART NO. DESCRIPTION PKG. QTY. RA1 F terminal bridging clip 100 Insulator Clips Insulator Clips Insulator clips mechanically protect wire terminations on R66 blocks. They are available in 2, 3 or 6-terminal clip configurations. Terminal clip insulators are manufactured from red PVC material. Insulator clips mechanically protect wire terminations on R66 blocks. NO. PART NO. DESCRIPTION PKG. QTY. P11798 F terminal clip insulator, red 25 P11799 F terminal clip insulator, red 25 18
19 DISTRIBUTION POST Description Our distribution post has an encapsulated screw that eliminates the need for installation tools. The post is manufactured using UL 94 V-0 rated plastic and a No. 8 sheet metal screw, and can be used on wooden or pre-drilled inch diameter in metal backboards. R20B Distribution Post PART DESCRIPTION R20B F Distribution post with #8 encapsulated screw and 1/2" hex socket ONE-PAIR TESTERS FOR CROSS-CONNECT TERMINALS KEY FEATURES yidentical to original tester for easy replacement. ypocket tester contains ring terminals to allow easy connection to handset; is quicker and easier than attaching handset to talk block at disk on door. Description Our one-pair testers allow electrical access to an individual pair in a 25-pair BT, 50-pair CQF, or RLS blocks used in any of the interface terminals manufactured by Vertiv. The testers with leads can replace those in the cross-connect terminal, and the pocket tester is convenient for craftspeople to carry. PART DESCRIPTION P22368 F One-pair tester with 5' leads for BT 25-pair block P62632 F One-pair pocket tester for BT 25-pair block P33392 F One-pair tester with 8' leads for CQF 50-pair block P62633 F One-pair pocket tester for CQF 50-pair block RLSTEST1 F One-pair tester with 8' leads for RLS block and 3M SS-25 RLSTEST1PKT F One-pair pocket tester for RLS block and 3M SS-25 P62632 One-Pair BT Pocket Tester P62633 One-Pair CQF Pocket Tester RLSTEST1 RLS Block One-Pair Tester 19
20 ACCESSORIES Return TEST EQUIPMENT PART DESCRIPTION USAGE F Black cable pair shorting plug, gold-plated pins on an insulated plug For R399 connectors F " black single pair tester with gold-plated pins and insulated alligator clips For R399 connectors Single Pair Tester 1161 F " clear, opaque single pair tester with gold-plated pins and insulated alligator clips For most test fields Secures into Vertiv 303, 305, 355, 710 test fields RLS ACTIVATORS RLSACT Series RLS Activator P60209 Half-Tap Activator FEEDTHRUHALFTAP Half-Tap Activator PART DESCRIPTION USAGE RLS Activators RLSACTGRAY F Gray 500 RLSACTGRAY10 F Gray 10 RLSACTORANGE F Orange 500 Half-Tap Activator P60209* F N/A 1 FEEDTHRUHALFTAP* F N/A 25 * For performing dual terminations on RLS blocks. 20
21 SPECIAL SERVICE CAPS PART DESCRIPTION USAGE P25441 F BT25 special service caps 50 P38220 F CQF50 special service caps 50 P53828 F RLS50 special service caps 80 URLSCAPRED F URLS special service caps 100 Note: Special service caps are used to identify special circuits on cross-connect blocks and/or terminal blocks. P38220 P25441 P53828 PART DESCRIPTION USAGE 1166 F Terminal caps - special circuit (red) Terminal caps mark and protect wire-wrap terminals of special circuits 1166 Terminal Caps - Special Circuit 21
22 ACCESSORIES Return COLOR-CODED METAL BACKBOARDS KEY FEATURES ystandard sizes that simplify system planning. ycolor-coded for clear function identification. yfour mounting holes which secure installations. Application Color-coded backboards are used in equipment rooms or satellite closets to cross-connect or connect wires for telephone or data equipment installation. Color-coding makes it easy to determine wire direction. PART DESCRIPTION R183C6 R891S100* F F /4" orange distribution posts, 8-1/2" x 10" with (2) mounting screws for network interface units (Ref: R700A66-B1-25/R700B66-B1-12) Stand-off mounting bracket for R66 M blocks, unit of measure: 100, 10" x 2.75" x 1.875" (H x W x D)* * UL Listed 94 V-0 rated self-extinguishing material R891S Stand-Off Bracket R183C6 22
23 SPRAY PAINT PART DESCRIPTION USAGE TU17* F Gray-green spray paint All closures TU20* F Beige spray paint All closures TU27* F Off-white glossy spray paint All closures P90370 F Small bottle, off-white touch-up paint with brush All off-white closures (can ship air) TU20 Spray Paint * Cannot ship via air. 23
24 VertivCo.com Vertiv Headquarters, 1050 Dearborn Drive, Columbus, OH, 43085, USA 2017 Vertiv Co. All rights reserved. Vertiv and the Vertiv logo are trademarks or registered trademarks of Vertiv Co. All other names and logos referred to are trade names, trademarks or registered trademarks of their respective owners. While every precaution has been taken to ensure accuracy and completeness herein, Vertiv Co. assumes no responsibility, and disclaims all liability, for damages resulting from use of this information or for any errors or omissions. Specifications are subject to change without notice. OE (R03/17)
VERTIV XTE 401 SERIES. Ordering Guide
VERTIV XTE 401 SERIES Ordering Guide VERTIV XTE 401 SERIES Description The Vertiv XTE 401 Series is a family of three small single sided low-cost indoor or outdoor rated aluminum enclosures. These versatile
NetReach BUP Series Integrated Building Entrance Terminal Solution
NetReach BUP Series Integrated Building Entrance Terminal Solution Key Features n 25, 50 and 100 pair versions n New compact 25 pair size requires minimum mounting space n Outdoor or indoor mounting capability
COYOTE CLOSURE ADOBE SERIES FOR UNDERGROUND, AERIAL, AND BURIED SPLICES 6.0" x 22" 8.5" x 22" (152.4 mm x mm mm x 558.
FEBRUARY 2000 COYOTE CLOSURE ADOBE SERIES FOR UNDERGROUND, AERIAL, AND BURIED SPLICES 6.0" x 22" 8.5" x 22" (152.4 mm x 558.8 mm 215.9 mm x 558.8 mm) Be sure to read and completely understand this procedure
CS Fiber Optic Splice Case. Instruction
3 2179-CS Fiber Optic Splice Case Instruction 2179-CS Fiber Optic Splice Case Description 1.0 General 1.1 The 3M 2179-CS Fiber Optic Splice Cases are closures that can be used in buried, underground, aerial,
GROUNDING & BONDING PRODUCTS
GROUNDING & BONDING PRODUCTS Busbars Page 5-3 Insulators Page 5-8 Grounding Products Page 5-9 Compression Tools, Lugs & Taps Page 5-14 Learn About CPI s Extended Limited Warranties for coverage of (2)
INSTALL INSTRUCTIONS DC C-EV. Installation Instructions: DC C-EV.
INSTALL INSTRUCTIONS DC6-48-60-0-8C-EV Installation Instructions: DC6-48-60-0-8C-EV INSTALL INSTRUCTIONS DC6-48-60-0-8C-EV Contents Section Description Page 1 Copyright 2 1.1 Disclaimer 2 1.2 Warnings
Heavy Duty Copper Battery Terminals
Heavy Duty Copper Battery Terminals Constructed of 131 contact copper to provide high conductivity. Raised characters to ensure legibility of important information regarding cable size, post type, and
COYOTE STP (Service Termination Point)
JANUARY 2017 COYOTE STP (Service Termination Point) Be sure to read and completely understand this procedure before applying product. Be sure to select the proper PREFORMED product before application.
COYOTE STP (Service Termination Point)
March 2019 COYOTE STP (Service Termination Point) Be sure to read and completely understand this procedure before applying product. Be sure to select the proper PREFORMED TM product before application.
Castle Model TSM-35. Heavy Duty Screw Pocket Machine. For Models with Serial Number and Above Items Included with Machine
Castle Model TSM-35 Heavy Duty Screw Pocket Machine For Models with Serial Number 63658 and Above Items Included with Machine Part No. Description Qty B02964 9/64" Castle Premium Brad Point Drill Bit w/
CABLE GRIPS Strain-Relief Grips Pulling Grips Support Grips
Tough and dependable, Woodhead cable grips and cord grip bodies are reliable workhorses in any plant environment. They serve as flexible holding devices used to pull cable, rope, or tubing into place,
Fiber Optic Above-Ground) Cross-Connect Enclosure (ACE) Model ACE-200DS Installation Guide)
Fiber Optic Above-Ground) Cross-Connect Enclosure (ACE) Model ACE-200DS Installation Guide) 13536-A Figure 1. ACE-200DS Enclosure With OCM-HD Panels Content Page INTRODUCTION... 2 1 PRODUCT DESCRIPTION...
circuit protection & wiring accessories
circuit protection & wiring accessories J J1 circuit breakers Circuit breakers and fuses are a cost-effective solution to protecting wiring, equipment and subsystems. While fuses are a one-time, disposable
Castle Model TSM-21 Standard Screw Pocket Machine
Castle Model TSM-21 Standard Screw Pocket Machine "For Models with Serial Number 62481 and Above" Items Included with Machine Part No. Description Qty B00964 Castle 9/64 Cobalt Drill Bit w 1/4" Shank 1
COYOTE Splice Case. Value conscious and benefit-packed: The COYOTE Splice 2-2
COYOTE Splice Case Value conscious and benefit-packed: The COYOTE Splice The combines the field-proven performance of the PREFORMED Splice Case (stainless steel) with the high capacity and craft-friendly
circuit protection & wiring accessories
circuit protection & wiring accessories CIRCUIT BREAKERS P1 P BLOCKS & BUSBARS TERMINAL BLOCKS P2 P3 CONNECTORS, TERMINALS & FUSES P4 CLAMPS, CLEATS, CLIPS & TIES P5 P1 circuit protection & wiring accessories
General Information... Temperature/Resistance Table... Part Numbering Examples for RTD s. High Temperature MgO Elements (RA)...
Page General Information... Temperature/Resistance Table... Part Numbering Examples for RTD s High Temperature MgO Elements (RA).... Leadwire Style RTD s (RB).. Leadwire Style RTD s (RD, RE, RF, or RG
COYOTE 28" GLC (Ground Level Closure) Complete Assembly Installation
NOVEMBER 2016 COYOTE 28" GLC (Ground Level Closure) Complete Assembly Installation Be sure to read and completely understand this procedure before applying product. Be sure to select the proper PREFORMED
650 Series Cargo Van Lift Mounting Instructions Ford Transit (Standard Roof) 2015-Present
TOMMY GATE OWNER'S / OPERATOR'S MANUAL 650 Series 650 LB Capacity 650 Series Cargo Van Lift Mounting Instructions Ford Transit (Standard Roof) 2015-Present Installing the Base Plate 1. Examine the interior
Grounding Accessories
Accessories Eaton offers a variety of grounding which are sold individually or as a kit. Kits are available as one kit per rack, allowing for ease of stocking and reordering. Vertical rack ground bar kit
Series 3 & 4 Stainless Steel - Accessories
- Accessories Splice Plates Standard 8-hole pattern for all steel splice plates. One pair including hardware provided with straight section. (Expansion splice quantity subtracted) Boxed in pairs with hardware.
WE MAKE PRODUCTS THAT MAKE A DIFFERENCE 12070 Burke Street Santa Fe Springs, CA 90670 Fax: 800-597-7757 B-FE-0509 www.phillipsind.com ABS LECTRACOIL 5 YEAR WARRANTY Assembly Only See website for details
P Original Series Cargo Van Lift Mounting Instructions Fullsize Ford Van present. Preparing the Gate
Fullsize Ford Van- 1992-present Preparing the Gate 1. Remove the mounting hardware which is banded to the liftgate. 2. Verify mounting kit (Figure 1 and Table 1). S-400-40 STRAP VAN MOUNTING EAR BENT BRACKET
STRAIGHT BLADE PLUGS & CONNECTORS
STRAIGHT BLADE PLUGS & CONNECTORS Quick-thread assembly screws and cord-grip screws come backed-out, ready-to-wire. See-through, thermoplastic terminal chamber for clear view of terminals and wire connections.
AUXILIARY BATTERY BOX INSTALLATION INSTRUCTIONS
AUXILIARY BATTERY BOX INSTALLATION INSTRUCTIONS The original TOMMY GATE hydraulic lift Assembling the Auxiliary Battery Box 1. Remove the cover from the auxiliary battery box by removing the two nuts and
SLiC Aerial Terminal and Spiral End Seal for use with AMP* Quiet Front Terminal Blocks
SLiC Aerial Terminal and Spiral End Seal for use with AMP* Quiet Front Terminal Blocks Instructions June 2002 78-8130-2161-1-B 1 Contents: 1.0 General... 3 2.0 Kit Contents... 3 3.0 Cable Preparation...
SUBMERSIBLE SECONDARY CONNECTORS SSBC350-4LI. Cond. Range H W L
SUBMERSIBLE SECONDARY CONNECTORS -1- Index TYPE SSBC350-L (Wide-Port Spacing) Rubber Insulated Secondary Connectors SURE-SEAL RUS Approved User friendly wide-port spacing (50% more room for cable training).
AMENDMENT ELECTRIC SERVICE MANUAL 2014
AMENDMENT (Pages 20,43,50,72,74,,76,78,83,86,99) ELECTRIC SERVICE MANUAL 2014 Effective April 1, 2015 18-7 6.0 SERVICE AND SERVICE ENTRANCES (General), Continued Conductor Sizing It is recommended that
Recreational Vehicle Park Electrical Products & Accessories
Recreational Vehicle Park Electrical Products & Accessories 2 MILBANK OVERVIEW Milbank Overview Energy At Work since 1927 Milbank designs and manufactures electrical solutions that move and manage power
CONNECTORS - SINGLE POLE
CONNECTORS - SINGLE POLE CROCODILE CLIPS DAVID USE PHOTO SD0010 TERMINAL POSTS SOLDER TAGS CRIMP CONNECTORS CRIMPING TOOLS DAVID USE PHOTO SD0010 BOOTLACE FERRULES 2127 CABLE SPLICES 2128 CRIMP CONNECTORS
THE ONE SOURCE FOR ALL OF YOUR WIRELESS NEEDS
CATALOG V3 THE ONE SOURCE FOR ALL OF YOUR WIRELESS NEEDS 505.343.5371 sales@miroc.com miroc.com WIRELESS IS ALL WE DO Alliance Corporation is a full-service value-added distributor and manufacturer of
ONTRAC WIRE MESH CABLE TRAY SYSTEM
P R O D U C T D ATA S H E E T ONTRAC WIRE MESH CABLE TRAY SYSTEM K E Y F E AT U R E S Available in two styles: Shaped and Standard Tray Easy to use pathway solution that supports large quantities of network
COYOTE 9.5" x 19" (292 mm x 509 mm) Dome Closure
AUGUST 2012 COYOTE 9.5" x 19" (292 mm x 509 mm) Dome Closure Be sure to read and completely understand this procedure before applying product. Be sure to select the proper PREFORMED product before application.
COYOTE Dome Closure 6.5" x 22" Kits. COYOTE Dome Closure 6.5" x 22" for Buffer Tube Applications. Includes: (2) Grommets, (1) Buffer
JANUARY 2015 COYOTE Dome Closure 6.5" x 22" Be sure to read and completely understand this procedure before applying product. Be sure to select the proper PREFORMED product before application. 1 2 3 6
VFD-1 Series Volt Rated IP-68 Ingress Protection Continuous 360 degree shielding
VFD-1 Series 2000 Volt Rated IP-68 Ingress Protection Continuous 360 degree shielding RigPower s mission is to create new industry standards in industrial electrical connectors by combining appropriate
COYOTE Dome Cross-Connect Closure 6-1/2" x 22"
FEBRUARY 2015 COYOTE Dome Cross-Connect Closure 6-1/2" x 22" Be sure to read and completely understand this procedure before applying product. Be sure to select the proper PREFORMED product before application.
CABLE MANAGEMENT. Call Connectronics (888) / / OUR RESOURCES ARE YOUR SOLUTION. Stackable Snap-In Hanger Kits
Universal Snap-In Hangers CABLE MANAGEMENT Stackable Snap-In Hanger Kits for 1/2 cable and LMR-600, 10-pack 82-2803 for 5/8 cable, 10-pack 82-2804 for 7/8 cable, 10-pack 82-2805 for EW52 Waveguide, 10-pack
8400 Series Fiber Distribution System
8400 Series Fiber Distribution System Instructions January 1997 34-7041-4699-1-A 1 Contents: 1.0 General... 3 2.0 System Components... 4 3.0 System Engineering... 5 4.0 Hardware Installation... 7 5.0 Cable
NTC Thermistor Assemblies
FEATURES Standard and custom assemblies are available in a variety of configurations Assemblies can conveniently attach to or be an integral part of any system to monitor or control temperature No added
Section 1 COYOTE Closure Series
COYOTE Closure Series: Section Section COYOTE Closure Series Table of Contents Page COYOTE Closure Overview...-2 COYOTE Splice Tray & Closure Capacity Charts...-4 COYOTE Closure...-7 COYOTE PUP Closure...-9
Good for ABS applications. Temperature rating -87ºF to 150ºF (-66ºC to 66ºC) Temperature rating -87ºF to 150ºF (-66ºC to 66ºC)
ABS LECTRACOIL 5 YEAR WARRANTY Assembly Only See website for details 16-125 Replacement 30-9620 15, with PERMAPLUGS 30-9621 15, with zinc die-cast plugs 30-9624 15, with (Quick-Connect Plugs) 30-9920 15,
B Polyethylene Tape. B Splicing Covering. Holster
Splicing Materials B Polyethylene Tape Translucent 8-mil polyethylene tape made from electrical grade base material. Intended for use in restoring the dielectric strength between the core and sheath at
66M C5 4 x 50, Category 5, 66M connecting block clip. 10"H x 3.4"W x 1.25"D
66 BLOCK SYSTEM Suttle s 66 Block system is used in equipment rooms or in remote and intermediate wiring closets to connect voice or data wiring to customer premise equipment. Blocks are molded of flame
Copper Bar... ASTM B187, B152 Silicon Bronze... ASTM F468, F467, F651
Eaton offers a range of cable grids and distribution frames to meet various telecommunications applications. Cable grids feature light-weight, yet durable steel c-channel, and are design to support cable
650 Series Cargo Van Lift Mounting Instructions Fullsize Ford 1992-Present
TOMMY GATE OWNER'S / OPERATOR'S MANUAL 650 Series 650 LB Capacity 650 Series Cargo Van Lift Mounting Instructions Fullsize Ford 1992-Present Installing the Base Plate 1. Examine the interior and exterior
Opti-Guard Splice Enclosure
Opti-Guard Splice Enclosure The Opti-Guard Splice Enclosure from AFL offers an impressive spectrum of features which makes it the best selection for your splice protection needs. Its unique and flexible
JANUARY 2015 NOMENCLATURE. TOOLS REQUIRED 3/8" & 7/16" Can wrench or socket 1/4 Nut driver or screwdriver Snips Fiber optic cable opening tools
JANUARY 2015 COYOTE Dome Closure 6-1/2" x 17" Be sure to read and completely understand this procedure before applying product. Be sure to select the proper PREFORMED TM product before application. 1 2
710 Splicing Rig. Instructions. January E
710 Splicing Rig Instructions January 2007 Table of Contents 1.0 General Statement...4 2.0 3M 710-UTK25A Splicing Rig and Field Maintenance Kit...4 3.0 Straight Splicing using the 3M 710 25-pair modules...6
Cold Shrink QS T Trifurcating Transition Splice Kit
Cold Shrink QS2012-13-3T Trifurcating Transition Splice Kit Instructions IEEE Std. 404-1993 15 kv Class 110 kv BIL Completed Splice Cable Size Range Requirements PILC 500 kcmil Conductor Size (240 mm 2
3M Cold Shrink Silicone Rubber Termination QT-III 7600-S-3G Series Three-Core Outdoor Termination
3M Cold Shrink Silicone Rubber Termination QT-III 7600-S-3G Series Three-Core Outdoor Termination Instructions IEEE Std. No. 48 Class 1 Termination CAUTION Working around energized electrical systems may
Switchgear Skid, C1192
CUSTOM SOLUTIONS 15kV Modular Stairs stored on floor in front of battery bay Ground grid stored on front tongue of trailer Stairs deployed for unit access Storage box for fencing materials and other parts
COYOTE Closure. Origin of the Species. Key Features: PATENTED 1-14
COYOTE Closure Origin of the Species Size L (cm) W (cm) H (cm) 6.0" x 22" 22" (56) 8½" (22) 7" (18) 8.5" x 22" 22" (56) 10-3/4" (27) 9¼" (24) PATENTED Setting the bar against which all other fi ber closures
IBER DISTRIBUTION FRAME (FDF) FOR EXCHANGE SIZE 900MM x 2200MM x 300 MM
F 19 Rack Exchange & Shelf Unit IBER DISTRIBUTION FRAME (FDF) FOR EXCHANGE SIZE 900MM x 2200MM x 300 MM 1. General : 1.1 This specification covers the requirements of the fiber distribution frame (FDF)
Another NEW and EXCITING solution from Metallics! Tired of searching for the right Air Handling Cable Ties? Here they are!
Metallics! Standard Mounting Hole Low Profile Air Handling Cable Ties (Plenum Rated) [ ] CONTRACTOR APPROVED Ideal Application: Air Handling Spaces, above drop ceilings and below raised flooring Meets
CTN U-TYPE DIE COLOR INDEX QTY 7/374 8/346 11/375 12/ /298 18/324 19/470 20/299 22/472 24/473 CTN U-TYPE DIE COLOR INDEX QTY
PAGE 2 PEEP HOLE STANDARD BARREL COPPER LUGS Allows inspection of the termination to assure complete cable insertion GL SERIES One-Hole 32000 GL 80 32002 GL 84 3999 GL 0 32004 GL 4 3200 GL 5 32003 GL 38
Grounding Solutions for Data Center Applications
Grounding Solutions for Data Center Applications B D A A C E G F E Legend For Typical Grounding Application (layout on following page) A) B) C) D) E) F) G) Vertical Rack Ground Bar Kit (see page 4) Horizontal
Eaton Corp. - Marina Power and Lighting, Inc. General Specifications for Lighthouse Power Pedestal
DRILL \ PUNCH OUT TO SIZE REQUIRED DRILL \ PUNCH OUT TO SIZE REQUIRED Lighthouse Power Pedestal - Specifications Lighthouse Power Pedestal Dimensions Height: 44.00" (1117.60 mm) Width: 13.67" (347.22 mm)
Motor Lead Pigtail or V-Stub Splice 5380 Series For 5/8 kv Non-Shielded and Shielded Feeder Cables (Tape, Wire or UniShield Cables)
Motor Lead Pigtail or V-Stub Splice 5380 Series For 5/8 kv Non-Shielded and Shielded Feeder Cables (Tape, Wire or UniShield Cables) Instructions Kit Contents 3 Lug Covers 3 Cold Shrink Terminations 12
12-Inch Hybrid Fiber Access Terminal Installation Instructions
12-Inch Hybrid Fiber Access Terminal Installation Instructions 19683-A Content Page 1 PRODUCT DESCRIPTION.................................................................. 2 2 PRODUCT FUNCTION.....................................................................
NOTE: CAPACITOR LEADS IN FIG #1 MAY REQUIRE SPLICING USING GA BUSS WIRE & SLEEVING AS NECESSARY TO ATTAIN REQUIRED LEAD LENGTH. 704
DIGITAL READ OUT (2.70 IDEAL FOR THIS RESISTOR) ENGAGE DCVΩ BUTTON DIGITAL VOLT METER ZERO ADJUST-CONNECT (2) ALLIGATOR CLIPS TOGETHER & ADJUST UNTIL DIGITAL READ OUT IS 0.00 NOTE: THIS MUST BE REPEATED
COYOTE Dome Closure 9.5" x 28" with Transition Tray for High Density Splice Applications
OCTOBER 2017 COYOTE Dome Closure 9.5" x 28" with Transition Tray for High Density Splice Applications Be sure to read and completely understand this procedure before applying product. Be sure to select
Be sure to read and completely understand this procedure before applying product. Be sure to select the proper PREFORMED product before application.
5 NOVEMBER 2010 COYOTE Dome 9.5 x 28 Be sure to read and completely understand this procedure before applying product. Be sure to select the proper PREFORMED product before application. 1. 7. 2. 4. 10.
COYOTE Terminal Dome Closure 6.5" x 22"
FEBRUARY 2015 COYOTE Terminal Dome Closure 6.5" x 22" Be sure to read and completely understand this procedure before applying product. Be sure to select the proper PREFORMED product before application.
RS-110 Rainfall Sensor Installation Guide
RS-110 Rainfall Sensor Installation Guide for XR440 and XR5 Data Loggers September 2015 Revision 1.1 1 Disclaimer The following warranty and liability disclaimer apply to this product. PACE SCIENTIFIC
Please read thoroughly before starting installation and check that kit contents are complete.
Rear Vision System Mirror Display 2013-Current Ram (Kit part number 1009-9518) Please read thoroughly before starting installation and check that kit contents are complete. Items Included in the Kit: Rear
3M Cold Shrink QT-III Silicone Rubber Three-Core Termination Kits
3M Cold Shrink QT-III Silicone Rubber Three-Core Termination Kits With High-K Stress Relief For 3-Conductor Type G (Ground Wire), Copper Tape Shield, Armored Cables 7600-S-3G Series Instructions IEEE Std.
MARCH COYOTE 9.5 x 19 (292 mm x 509 mm) Terminal Dome Closure Kits
MARCH 2012 COYOTE 9.5 x 19 (292 mm x 509 mm) Terminal Dome Closure Be sure to read and completely understand this procedure before applying product. Be sure to select the proper PREFORMED product before
INSTALLATION INSTRUCTION 88088
INSTALLATION INSTRUCTION 88088 For Rancho Suspension Systems RS6588 & RS6589: FORD F-150 READ ALL INSTRUCTIONS THOROUGHLY FROM START TO FINISH BEFORE BEGINNING INSTALLATION Rev B IMPORTANT NOTES! WARNING:
Band Heaters Maxiband Heaters Maxiband The Most Sought After Band Heater
Band Heaters Maxiband Heaters Maxiband The Most Sought After Band Heater A B C D E F General purpose terminal box offers excellent protection to the exposed terminals. To simplify electrical wiring, the
COYOTE 9.5" x 19" (292 mm x 509 mm) Cross-Connect Dome Closure
AUGUST 2013 COYOTE 9.5" x 19" (292 mm x 509 mm) Cross-Connect Dome Closure Be sure to read and completely understand this procedure before applying product. Be sure to select the proper PREFORMED TM product
Section 3 FIBERLIGN Closure Series
FIBERLIGN Closure Series: Section 3 Section 3 FIBERLIGN Closure Series Table of Contents Page FIBERLIGN s...3-2 FIBERLIGN Organizers...3-3 FIBERLIGN UNI-CLOSURE...3-8 FIBERLIGN Fiber Safe...3-11 FIBERLIGN
Circuit Breaker Lockout, Standard And Double Toggles Breaker, Rohs Compliant LOCKOUT,STD AND DOUBLE BREAKER. RoHS Compliant
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 44957 Lockout, STD and Double Breaker Ideal Catalog Number 44957 Manufacturer Ideal Circuit Breaker Lockout, Standard
Environmental Distribution Center (EDC-06P-NH)
Corning Cable Systems Standard Recommended Procedure (SRP) 003-545 Issue 4, July 2004 Page 1 of 13 Environmental Distribution Center (EDC-06P-NH) 1.2 To purchase any accessories that are sold separately,
Cantilever Series Mounting Instructions Chevy Express (AD) present
Chevy Express (AD)- 2003-present Preparing the Gate 1. Remove the platform, mounting kit, and bridge assemblies, which are banded to the main assembly. Leave the banding that holds the folding cylinder
AMP STACK III Modular connection system
III Modular connection system The AMP STACK MARK III 25 pair are designed to mass terminate communication cables of solid copper or aluminum conductor wires ranging from 0.32 to 0.8 mm of diameter, (28
C Power Connection Kit
1548-4000C Power Connection Kit For use with Dekoron 2700 Family of Heating Cables Installation Instructions Kit Description The Dekoron 1548-4000C electrical connection kit distirbuted by Heat-Line is
SERVICE ATTACHMENT ON A BUILDING WITH BUS DUCT SERVICE ENTRANCE AND INDOOR METERING
SERVICE ATTACHMENT ON A BUILDING WITH BUS DUCT SERVICE ENTRANCE AND INDOOR METERING Obtain acceptance and specific details from the local Company office. 1. Service entrance duct (see Note 1). Company
Amphenol. eries SJT. Series SJT. VG 96912, Series 1 PAN JN 1003
Amphenol eries SJT Series SJT VG 96912, Series 1 PAN 6433-2 JN 1003 Ordering information Ordering example: SJT G 06 RT 14-35 P A 014 Series (p. 9, 15, 18) SJT Scoop proof (100% scoop-proof) Junior (Miniature
Insulated Crimp Terminals
CONTENTS PVC Insulated ring terminals 3 PVC insulated spade terminals 3 PVC insulated pin terminals 4 PVC insulated blade terminals 4 PVC insulated butt connectors 4 PVC insulated female disconnectors
Series 2, 3, 4, & 5 Steel - Accessories
- ccessories Splice Plates Standard 8-hole pattern for all steel splice plates. One pair including hardware provided with straight section. Boxed in pairs Expansion Splice Plates Expansion plates allow
2-row and All-row systems included.
Ag Leader Technology Cotton Picker Installation Installation Instructions for John Deere cotton picker models: 2-row and All-row systems included. IMPORTANT: Ensure the model numbers shown above correspond
accessory guide Indoor AP Accessories Compatible Products Description Picture Kit Contents
Indoor AP Compatible Products Description Picture Kit Contents 902-0100-0000 ZoneFlex 7982 ZoneFlex R700 Multipurpose mounting bracket for 7982 supports mounting to hard wall, ceiling, electrical outlet
Model C4 - Diagram #1
C-4 Model C4 - Diagram # 29 2 40 ASSEMBLY 43 38 2 4 52 4 44 4 28 3 ASSEMBLY 32 34 ASSEMBLY 42 7 7 5 50 49 33 57 29 37 3 20 2 2 48 ASSEMBLY 5 3 9 2 3 0 4 3 2 58 22 23 ASSEMBLY ASSEMBLY 54 53 ASSEMBLY 5
Features: Use the selection chart below to choose the Splice Case and splice tray organizer which meet the requirements for your application.
FIBERLIGN Organizers For s (Protected and ) and Mechanical s FIBERLIGN Fiber Optic Organizers are designed to help organize, secure, support and protect delicate optical fibers before, during and after
MEDIA LED. Pendant Standard Mount Installation ou de montage WARNING:
MEDIA LED Pendant Standard Mount WARNING: Disconnect main power at the source prior to installation! Thread gripper base onto 1 /4 20 stud, or with #8 screw. Depress gripper nozzle to insert aircraft cable.
Specification Pad-Mounted Capacitor Bank with Dual Fusing Integral Load-Interrupter on Line-Side Fuse Mountings
Page 1 Specification Pad-Mounted Capacitor Bank with Dual Fusing Integral Load-Interrupter on Line-Side Fuse Mountings I. General This specification covers the design requirements for a pad-mounted capacitor
Cam-Lok Single Pole Connectivity. The industry standard for reliable service under the most severe operating conditions.
Cam-Lok Single Pole Connectivity The industry standard for reliable service under the most severe operating conditions. Cam-Lok Single Pole Connectivity Cam-Lok connectors are the industry standard Cam-Lok
Durulite Door Hardware Manual
R Durulite Door Hardware Manual World s Leading Manufacturer Of Traffic Doors Cincinnati, Ohio and Redmond, Oregon Phone: 1-800-543-4455 FAX: 1-800-245-7045 Www.chasedoors.com TABLE OF CONTENTS DESCRIPTION
Instructions for 2-row monitoring only
Installation Instructions for CaseIH cotton picker models: Instructions for 2-row monitoring only CAUTION: Ensure the model numbers shown above correspond to the machine model. If you receive the incorrect
Installation Instructions for John Deere cotton picker models: 9986 & 2-row and All-row systems included.
Ag Leader Technology Cotton Picker Installation Installation Instructions for John Deere cotton picker models: 9986 & 9996 2-row and All-row systems included. IMPORTANT: Ensure the model numbers shown
CommScope MULTILAYERED 289-TYPE INSTALLATION INSTRUCTIONS
CommScope MULTILAYERED 289-TYPE 63-460-32-03 BUILDING ENTRANCE PROTECTOR (BEP) Issue 5, February 2004 Material ID 847 364 882 INSTALLATION INSTRUCTIONS General This instruction sheet provides procedures
Series 2, 3, 4, & 5 Aluminum - Accessories
The following is a list of accessories and fittings that can be provided with S8 tray. For more information on these items, contact our Engineering Department. Fittings Horizontal Bends 30 Bends with 24,
and Original Series Pickup Lift Mounting Instructions Fleetside Chevy & GMC Trucks Fleetside 4-door Chevy & GMC Trucks T-100
r ve and Original Series Pickup Lift Mounting Instructions Fleetside Chevy & GMC Trucks - 1960-1987 Fleetside 4-door Chevy & GMC Trucks - 1988-1991 Preparing the Gate 1. Remove the mounting hardware which
STORAGE & MATERIAL HANDLING
www.greenlee.com STORAGE & MATERIAL HANDLING Contractors the world over rely on Greenlee storage and material handling solutions to keep product safe. From small chests to large field offices, and now
Fiber Connector Shelf (CCS)
Corning Cable Systems Standard Recommended Procedure (SRP) 003-595 Issue 3, May 2007 Page 1 of 6 Fiber Connector Shelf (CCS) Table of Contents 1. General... 1 2. Precautions... 1 3. Components... 2 4.
INSTALLATION INSTRUCTION 88581
INSTALLATION INSTRUCTION 88581 FOR RANCHO SUSPENSION SYSTEM RS6581B: DODGE RAM READ ALL INSTRUCTIONS THOROUGHLY FROM START TO FINISH BEFORE BEGINNING INSTALLATION Rev C IMPORTANT NOTES! WARNING: This suspension
CABINET OPTIONS AND DESIGNATORS CODE LETTERS
CABINET OPTIONS AND DESIGNATORS Hinges: ~Stainless steel lift off Nuts and Bolts: ~ Stainless steel Hardware: ~ Handles and Corbin locks are stainless steel or zinc plated Windows: ~ Lexan Backboards:
Series 2, 3, 4, & 5 Aluminum - Accessories
Wedge Lock Splice Plates Standard 4-hole pattern. Furnished in pairs, with hardware. One pair including hardware provided with each section. Boxed in pairs with hardware. For field installation drill 13
THE ENCLOSURE HARDWARE SUPPLIER
FABTECH SUPPLY THE ENCLOSURE HARDWARE SUPPLIER Our Products JIC Style Enclosures JIC Style Cover Clamp Bracket... 5 JIC Style Cover Clamp... 6 JIC Style Cover Clamp Assembly... 6 JIC Cover Clamp Screws...
INSTALLATION INSTRUCTION Rev A
INSTALLATION INSTRUCTION 88587 Rev A FOR RANCHO SUSPENSION SYSTEM RS6587B: 2009 DODGE RAM 1500 READ ALL INSTRUCTIONS THOROUGHLY FROM START TO FINISH BEFORE BEGINNING INSTALLATION IMPORTANT NOTES! WARNING: