Switched Disconnects and Enclosures

Transcription

1 Section F Switched Disconnects and Enclosures Index Product Page Circuit-Lock Unfused Disconnect Switches Summary F- Ratings Quick Reference Guide F- Labelless Circuit-Lock Unfused Disconnect Switches 0, 60 and 0 Amp Units F- Accessories and Replacement Parts F-6 Dimensions and Specifications F-7 MotorQuick Disconnect Switches Cost of Ownership Analysis F-8 Labelless Disconnect Switches and Accessories F-9 Dimensions and Specifications F- Fused Disconnects, MotorQuick and VFDs Circuit-Lock Fused Disconnect Switches 0 and 60 Amp Units F- Horsepower Ratings and Specifications F- Hazardous Locations Unfused Disconnect Switches F- AC Manual Toggle Controllers/Disconnects 600V AC Manual Motor Controllers/Disconnects F-7 NEMA Disconnect Switches F-8 NEMA /R and R Disconnect Switches F-9 Hazardous Locations 0 Ampere, 600 Volts AC Manual Motor Controllers F-0 40, 0, 60 and 8 Ampere, 600 Volts AC Manual Motor Controllers.... F- NEMA 4X Disconnect Switches F- Pendant Pushbutton Stations CPB and PBS Series F- Accessories and Replacement Parts F-4 NEMA, /R and 4X Disconnect Switches Wiring Device-Kellems F-

2 Hubbell s Circuit-Lock Manual Motor Controllers "Suitable as Motor Disconnects" Hubbell manufactures one of the most complete lines of motor disconnects on the market. Designed to ensure maximum reliability and performance, Hubbell Circuit-Lock motor controllers meet or exceed all industry requirements. Because our Circuit-Lock motor controllers are also disconnects, they ensure safety, compliance, flexibility and productivity for today s industrial and commercial environments. Whether controlling motor loads, safely terminating power or isolating equipment, Hubbell has the solution for youno matter what the environment or application. Hubbell Flexibility Hubbell Productivity Hubbell Safety Safety of personnel and equipment is paramount in any manufacturing environment. Hubbell Circuit-Lock motor controllers withstand short circuits and provide a high degree of safety across the factory floor. Disconnect Switches for Variable Frequency Drives (VFDs) safely terminate power to prevent risk of injury and damage to highperformance output devices used for controlling today s conveyor systems. With Hubbell s wide range of Circuit-Lock motor controllers and disconnects that offer several mounting options, NEC line of sight requirements are easily achieved at the equipment or on the wall in virtually any industrial environment. Switches with a compact footprint, a variety of NEMA type enclosures and plug-and-play LINKOSITY make switch placement easier and more flexible than ever. Hubbell Compliance Compliance with codes and regulations is a must in any industrial environment. Hubbell motor controllers meet a variety of requirements, including OSHA lockout/tagout, NSF certification for hygiene and hazardous location ratings. Each Circuit-Lock motor controller is UL listed as Suitable as Motor Disconnect. The NEC allows for the disconnect and controller to be in one unit. Circuit-Lock keeps assembly lines, goods and services moving. By offering a dual motor controller-disconnect rating, power can be safely terminated at any point in the circuit to perform maintenance on a single motor without shutting down the entire line. With the plug-and-play LINKOSITY power system, MotorQuick reduces motor change-out time by more than 6% to get equipment up and running faster. Variable Frequency Disconnects Each Controller is Also a Disconnect NEC is a registered trademark of the National Fire Protection Association (NFPA). NEMA is a registered trademark of the National Electrical Manufacturers Association. F- Wiring Device-Kellems

3 Hubbell Manual Motor Controllers and Disconnects "Suitable as Motor Disconnects" Ratings Quick Reference Guide Circuit-Lock Switched Enclosures HP Amp Phase Poles TYPE Non-Metallic TYPE Non-Metallic TYPE Non-Metallic HBL89MQR HBL89MQ HBL89MQR NEMA Aluminum NEMA Aluminum NEMA Non-Metallic NEMA Non-Metallic NEMA /R Non-Metallic NEMA /R Non-Metallic NEMA R Die Cast Aluminum NEMA R Die Cast Aluminum NEMA R Aluminum NEMA R Aluminum IP69k TYPE 4X Labelless Non-Metallic IP69k TYPE 4X Labelless Non-Metallic IP69k TYPE 4X Labelless Non-Metallic IP69k TYPE 4X Labelless Non-Metallic IP69k TYPE 4X Labelless Non-Metallic IP69k TYPE 4X Labelless Non-Metallic TYPE 4X Labelless Non-Metallic TYPE 4X Labelless Non-Metallic TYPE 4X Labelless Non-Metallic IP69k TYPE 4X Stainless Steel IP69k TYPE 4X Stainless Steel IP69k TYPE 4X Stainless Steel TYPE 4X Stainless Steel TYPE 4X Stainless Steel TYPE 4X Non-Metallic Fused Disconnect NEMA 4X Stainless Steel NEMA 4X Non-Metallic 60 NEMA R Aluminum NEMA R Aluminum IP69k TYPE 4X Non-Metallic IP69k TYPE 4X Non-Metallic IP69k TYPE 4X Stainless Steel IP69k TYPE 4X Stainless Steel TYPE 4X Non-Metallic Fused Disconnect NEMA 4X Stainless Steel NEMA 4X Non-Metallic 0 IP69k TYPE 4X Non-Metallic IP69k TYPE 4X Non-Metallic IP69k TYPE 4X Stainless Steel IP69k TYPE 4X Stainless Steel HBL7D HBL79D HBL9D HBL89D HBLRD HBLRD HBLRD HBLRD HBLR9D HBLR89D HBLDS HBLDSAC HBLDSAC HBLDSNK HBLDSACNK HBLDSACNK HBLDSMQR HBLDSMQ HBLDSMQR HBLDSSS HBLDSSSAC HBLDSSSVFD HBLDSSSMQR HBLDSSSMQ FDS0 HBLSD HBLXD HBL6R9D HBL6R9D HBLDS6 HBLDS6AC HBLDS6SS HBLDS6SSAC FDS60 HBL6S6D HBL6X6D HBLDS HBLDSAC HBLDSSS HBLDSSSAC Circuit-Lock Switches HP Amp Phase Poles Toggle Switch Short Toggle Switch Toggle Switch, Bulk Pack Toggle Switch Short Toggle Switch 0 0 HBL78D HBL78DS HBL78DX HBL78D HBL78DS 40 Toggle Switch Toggle Switch 0 HBL784D HBL784D 0 Toggle Switch Toggle Switch HBL78D HBL78D Finger guard (0 0A Switches) HBLFG0 60 Toggle Switch Toggle Switch Toggle Switch Front Wire Toggle Switch Front Wire 8 Toggle Switch Toggle Switch HBL786D HBL786D HBL786FWD HBL786FWD HBL788D HBL788D HBL79D HBLDS HBLSD HBLDSSS HBLDSMQR HBL78D HBL786D HBLR89D HBL6R9D FDS0 HBLDSSSR HBLDSMQ HBL78D HBL786D Wiring Device-Kellems F-

4 Circuit-Lock Unfused Disconnect Switches Features and Benefits IP69k Labelless Circuit-Lock 0, 60, and 0 Ampere Unfused Disconnect Switches NEC section 40.(B) requires each motor controller to have a disconnect within line of sight from the motor and driven equipment. NEC section 40.9(A)(6) recognizes that a manual motor controller and disconnect can be the same unit, provided it has been tested for this purpose. Hubbell s Circuit-Lock Unfused Disconnect Switches are UL listed as a manual motor controller and also suitable as a motor disconnect and meet these code requirements. In addition, the enclosure offers the ability to lock directly wired motor loads in the OFF position to comply with OSHA Lockout/Tagout regulations. This safety enclosure is Type 4X (Wash down, Corrosion resistant) IP69k and is also suitable for use with metallic conduit. The switch is mounted on an internal frame that is integral with the enclosure and bonds all grounds, and it accepts auxiliary contacts that can be used to signal PLC controllers. Stainless steel hardware for corrosion resistance Product ratings are laser-marked into the device and will not wash off for permanent identification Molded-in conduit opening and field installed hub Internal frame automatically bonds all grounds High visibility red handle can be locked in the OFF position as a method of compliance with OSHA Lockout/ Tagout requirements Reversible interior accommodates top or bottom conduit opening Captured neoprene gasket provides a watertight seal between cover and base Type 4X, and IP69k enclosure is molded of rugged Valox to resist abuse, corrosion and enhance safety HBLDS Three molded-in conduit drill points are located on the top, bottom, and back surface of enclosure IP69k Labelless Circuit-Lock Unfused Disconnect Switches are available in 0, 60 and 0 Amp, 600V AC ratings. Auxiliary contacts are available for control circuit applications including the ON/OFF control of pilot lights or signal for programmable controllers. Conduit hub and adjustable mounting feet are supplied for ease of installation. Valox is a trademark of SABIC Innovative Plastics, acquired from General Electric Company. F-4 Wiring Device-Kellems

5 Circuit-Lock Unfused Disconnect Switches Suitable as Motor Disconnects IP69k UL Listed, CSA Certified TYPE 4, 4X and Enclosure Rating Labelless Circuit-Lock Unfused Disconnect Switches in Non-Metallic Enclosures* 0 Amp 60 Amp 0 Amp Labelless disconnect switch. HBLDS HBLDS6 HBLDS Labelless disconnect switch for use with variable HBLDSVFD HBLDS6VFD HBLDSVFD frequency drives. Labelless disconnect switch with HBLAC HBLDSAC HBLDS6AC HBLDSAC auxuliary contact. Labelless disconnect switch with HBLAC HBLDSAC auxuliary contact. Labelless disconnect switch without conduit HBLDSNK knockout or conduit fitting. Labelless disconnect switch with HBLAC auxuliary HBLDSACNK contact without conduit knockout or conduit fitting. Labelless disconnect switch with auxuliary contacts, without conduit knockouts. Break before main break set normally open, set normally closed. Break after main break sets normally open, set normally closed. HBLDSACNK HBLDSAC Circuit-Lock Unfused Disconnect Switches in Stainless Steel Enclosures* 0 Amp 60 Amp 0 Amp Square Top disconnect switch. HBLDSSS HBLDS6SS HBLDSSS Square Top disconnect switch for use with variable HBLDSSSVFD HBLDS6SSVFD HBLDSSSVFD frequency drives. Square Top disconnect switch with HBLAC HBLDSSSAC HBLDS6SSAC HBLDSSSAC auxuliary contact. Sloped Top disconnect switch. HBLDSSSR HBLDS6SSR HBLDSSSR Sloped Top disconnect switch for use with variable HBLDSSSRVFD HBLDS6SSRVFD HBLDSSSRVFD frequency drives. Sloped Top disconnect switch with HBLAC auxuliary contact. HBLDSSSRAC HBLDS6SSRAC HBLDSSSRAC HBLDSSS Auxiliary Contacts for 0, 60 and 0 Amp Switch, NEMA A600 Pilot Duty Break After Main Break, set of n/o contacts, HBLAC** set of n/c contacts. Break Before Main Break, set of n/o contacts. HBLAC** Note: *Certified by NSF, International. **Up to two auxiliary contacts per enclosure. Not for use with HBLDSACNK. 0A Units are supplied with one ¾ in. NPT Raintight conduit fitting. 60A and 0A Units are supplied with two ¼ in. NPT Raintight conduit fittings. Variable Frequency Drive Diagram HBLDSSSR HBLAC HBLAC Wiring Device-Kellems F-

6 Circuit-Lock Unfused Disconnect Switches Suitable as Motor Disconnects Labelless Replacement Covers IP66 SUITABILITY 0 Amp 60 Amp 0 Amp For non-metallic switches. HBLDSRC HBLDS6RC HBLDSRC For square top stainless steel switches. HBLDSSSRC HBLDS6SSRC HBLDSSSRC For sloped top stainless steel switches. HBLDSSRRC HBLD600SSRRC HBLD600SSRRC HBLDSRC Replacement Ground Block For 0A switches. For 60A and 0A switches. HBL0RGB HBL600RGB HBLDSSSRC Replacement Neutral Block For 0A switches. For 60A switches. For 0A switches. HBL0RNB HBL60RNB HBL0RNB Replacement Switches For 0A switches. For 60A and 0A switches. For HBLDSACNK. HBLDSRS HBLDS600RS HBLDSACRS HBLDSSRRC Replacement Mounting Feet For 0A non-metallic switches. For 60A and 0A non-metallic switches. Note: Package of feet and screws. HBLRFT HBLRFT HBL0RGB HBL0RNB HBLDSRS HBLRFT F-6 Wiring Device-Kellems

7 Circuit-Lock Unfused Disconnect Switches Dimensions and Specifications Dimensions Labelless Non-Metallic Stainless Steel, Square Top Stainless Steel, Sloped Top 0A 60A/0A 0A 60A/0A 0A 60A/0A Key inch (mm) inch (mm) inch (mm) inch (mm) inch (mm) inch (mm) A 6.00 () 7.7 (97) B. () 6.87 (7) 4.87 (4) 7.0 (8).4 (7) 7.66 (9) C 4. () 4.7 ().0 (84).0 (40) 4.0 (4) 6.4 (64) D 6.6 (68) 8.00 (0) E 7.6 (94) 9.9 () 7.0 (79).0 (6) 8.60 (8).4 (90) F 8.0 (6).00 (79) 8.8 ().6 (96) 8. (09).7 (84) G 4. ().94 ().9 (7).9 () 4.9 () 6. () Horsepower Ratings Voltage 0A 0A* 60A 0A Ø V AC Ø 00 40V AC. Ø 480V AC 0 0 Ø 00 40V AC 0 0 Ø 480V AC 0 0 Ø 600V AC 0 0 Note: *HBLDSACNK. Non-Metallic Stainless Steel, Square Top Stainless Steel, Sloped Top Circuit-Lock Unfused Disconnect Switches Specifications Moisture Resistance Indoor and Outdoor Type 4X (Wash down, Corrosion resistant); Indoor 0, 60A and 0A Type (Dust-tight, Falling Dirt, Noncorrosive Liquids). Flammability UL94-VA and V0 Classification. Operating Temperature Maximum Continuous 7 C; Minimum Continuous -40 C without impact. UV Resistance All materials are UV stabilized. Dielectric Voltage Withstands 000V AC minimum. Max. Working Voltage 600V AC RMS. Current Interrupting Certified for current interrupting at full rated current and voltage. Short Circuit Current Ratings (SCCR): 0/60/0A: Suitable for use on a circuit capable of delivering not more than ka RMS (Motor Disconnect) symmetrical, 600V AC max. 0A: Suitable for use on a circuit capable of delivering not more than 6kA RMS symmetrical, 600V AC max. when protected by Class J fuses rated 0A max. 60/0A: Suitable for use on a circuit capable of delivering not more than 6kA RMS symmetrical, 600V AC max. when protected by Class J fuses rated 0A max. Terminal Identification In accordance with UL, CSA and international conventions. Product Identification Identification and ratings are part of external label. Mounting Non-Metallic - External fully adjustable feet. Stainless Steel - Feet are fixed. Impact Resistance In accordance with UL 746C. Materials Part Non-Metallic Stainless Steel Base Valox #4 Gauge Type 04 Stainless Steel Top Valox #4 Gauge Type 04 Stainless Steel Handle Valox Valox Conduit Hub Zinc 0A Unfused - ¾ in. Zinc 0A - ¾ in. Zinc 60/0A Unfused - ¼ in. Zinc 60/0A - ¼ in. Enclosure Gasket Neoprene Neoprene Shaft (Unfused) Valox Valox Shaft Seal Molded Neoprene Molded Neoprene Frame Galvanized Steel N/A Enclosure Screws Stainless Steel 00 Series Stainless Steel Valox is a trademark of SABIC Innovative Plastics, acquired from General Electric Company. Dimensions in Inches (mm) Wiring Device-Kellems F-7

8 Hubbell s MotorQuick Plug and Play Technology MotorQuick significantly reduces the time it takes to replace motors by combining the plug-and-play technology of the LINKOSITY power system with the versatility of Circuit-Lock motor disconnect switches. Quick disconnect terminations will reduce motor changeout time by aproximately 6%. Keeping spare motors already pre-wired with a LINKOSITY inlet enables wiring to be done off-line when it is convenient, not critical. Motor rotation can be pre-checked in a maintenance shop to further speed the installation. The net result is that equipment is up and running in a fraction of the time, helping improve the bottom line. MotorQuick Cost of Ownership Analysis Traditional Motor Changeout Total Material Cost Labor Cost/ Hr Downtime Total Labor Cost Downtime Cost/hr Total Downtime Cost Total Cost HBL89D HBLDS $6.00 $8.00 $.00 $.00 hour hour $.00 $.00 $70.00 $70.00 $70.00 $70.00 $ $ MotorQuick Motor Changeout HBL89MQ* HBLDSMQ* Total Material Cost $99.00 $4.00 Labor Cost/ Hr $.00 $.00 Downtime 0 minutes 0 minutes Total Labor Cost $7.67 $7.67 Note: *MotorQuick catalog numbers are based on the average cost of the various designs. Downtime Cost/hr $70.00 $70.00 Total Downtime Cost Total Cost Total Savings $0.00 $0.00 $66.67 $ $4. $09. F-8 Wiring Device-Kellems

9 0 Ampere, 600 Volts AC NEMA Enclosure Thermoplastic Cover on Plated Steel Base Type 4X Enclosure Permanent Labelless Marking IP67 SUITABILITY Pre-wired with LINKOSITY Components Lockable Handle to Meet OSHA Lockout/ Tagout Regulations High Impact Valox Enclosure HBL89MQ Crush and Impact Resistance of MC Cable Cable Ratings: TC-ER, MTW, STOOW HBLDSMQ MotorQuick Disconnect Switches Type Non-Metallic Enclosure 0A Pole 600V AC HBL89D with one pre-wired LINKOSITY female receptacle (load side). HBL89D with foot pre-wired LINKOSITY female cable (load side). HBL89D with one pre-wired LINKOSITY male receptacle (line side) and one pre-wired LINKOSITY female receptacle (load side). Type 4X Non-Metallic Labelless Enclosure 0A Pole 600V AC HBLDS with one pre-wired LINKOSITY female receptacle (load side). HBLDS with foot pre-wired LINKOSITY female cable (load side). HBLDS with one pre-wired LINKOSITY male receptacle (line side) and one pre-wired LINKOSITY female receptacle (load side). HBL89MQR HBL89MQ HBL89MQR HBLDSMQR HBLDSMQ HBLDSMQR Type 4X Stainless Steel Enclosure 0A Pole 600V AC Sloped Top Square Top HBLDSSS with one pre-wired LINKOSITY female receptacle (load side). HBLDSSSRMQR HBLDSSSMQR HBLDSSS with foot pre-wired LINKOSITY female cable (load side). HBLDSSSRMQ HBLDSSSMQ HBLDSSS with one pre-wired LINKOSITY male receptacle (line side) HBLDSSSRMQR HBLDSSSMQR and one pre-wired LINKOSITY female receptacle (load side). HBL89MQR HBLDSMQR Accessories P 4W LINKOSITY male receptacle for installation on motor. P 4W LINKOSITY female receptacle for installation in switch. P 4W LINKOSITY double ended (male/female) -0 foot cable. P 4W LINKOSITY single ended (female) -0 foot cable. Cord connector, ¾ in. NPT.6.7 in. (6.0 9.) diameter. Lock-on cover for LINKOSITY connections. RM004PA00 RF004PA00 PH004PAxxx* PF004PAxxx* SHC7CR PH00C Note: *Cables available from -0 feet in foot increments. To purchase larger cable, replace the XXX with the required length in feet. (Examples: PH004PA00 = foot cable, PH004PA00 = 0 foot cable.) Sample Set Up () HBLDSMQR + () PH004PAxxx + () RM004PA00 = Total Set Up** + + = HBLDSSSRMQR HBLDSSSMQR PH00C Note: ** Retrofit parts available for pre-existing disconnect switch installations. Please consult factory for availability. Valox is a trademark of SABIC Innovative Plastics, acquired from General Electric Company. Wiring Device-Kellems F-9

10 0 Ampere, 600 Volts AC Dimensions Type Type 4X.40" (86.6) Male LINKOSITY Receptacle (MQR Option).88" (.).97" (0.84) 4." (4.8) 6.00" ()." () 4." () OFF ON 6.6" (68) 7.6" (94) 8.0" (6) 4." () HP Rating V AC 40V AC 480V AC 600V AC 0 Female LINKOSITY Receptacle Female LINKOSITY Cord (MQ Option) Male LINKOSITY Receptacle (MQR Option) Female LINKOSITY Cord (MQ Option) Female LINKOSITY Receptacle HP Rating V AC 40V AC 480V AC 600V AC Specifications Type Type 4X Electrical Performance Dielectric Voltage,00V AC minimum for minute.,00v AC minimum for minute. Electrical Life 6,000 cycles with load. 6,000 cycles with load. Max. Working Voltage 600V AC RMS. 600V AC RMS. Short Circuit Current Ratings (SCCR):,000 RMS symmetrical amps when tested (Motor Disconnect) with 60A max J fuses. Short Circuit Current Ratings (SCCR):,000 RMS symmetrical amps when tested (Motor Controller) with A RK fuses. 0: Suitable for use on a circuit capable of delivering not more than ka RMS symmetrical, 600V AC max. 0A: Suitable for use on a circuit capable of delivering not more than 6kA RMS symmetrical, 600V AC max. when protected by Class J fuses rated 0A max. Mechanical Mechanical Life,000 minimum cycles.,000 minimum cycles. Amps AWG Min. AWG Max. Amps AWG Min. AWG Max. Terminal Accommodations 0 #4 # 0 #4 # Terminal Torque 0 0 inch pounds 0 0 inch pounds Impact Resistance UL746C Environmental Flammability UL94HB/V-0. UL94-VA and V0 Classification. Operating Temp. Max. continuous 60 C Max. continuous 7 C Min. continuous w/o impact -40 C Min. continuous -40 C Listings UL 08 Industrial Control Equipment File #E6 Industrial Control Equipment File #E6 LINKOSITY Connection Certifications Connecting Components Listed to UL 8 and UL 0E. Electrical Performance Voltage Up to 600V AC. Amperage Up to 0A. Environmental Connectivity System Components Moisture Resistance UL Type 4, 4X, and. Ingress Protection IP67 Suitability. Flammability UL94HB cables / UL94V-0 receptacles. Materials Connectivity System Components Contact Carrier Nylon 6/6, white. Contact Materials Pins - brass. Sockets - leaded nickel copper w/ stainless steel sleeve. Contact Plating Hard gold over palladium/nickel. Overmold Material Glass filled polyurethane, gray. Coupling Hardware Nickel plated brass. Cable (6 AWG and Up) UL 600V Type TC-ER, MTW 90 C or STOOW 600V C. Dimensions in Inches (mm) F- Wiring Device-Kellems

11 Circuit-Lock Fused Disconnect Switches Suitable as Motor Disconnects Features and Benefits Circuit-Lock 0 and 60 Ampere Fused Disconnect Switches The Circuit-Lock Fused Disconnect Switch provides fused switched control of a directly wired load. The switch cannot be turned ON unless the enclosure cover is closed. The fuses cannot be accessed until the switch is turned OFF. The fuse holder accepts Class J fuses. This enclosure is non-metallic and is listed for Outdoor/Indoor (Type 4X Wash down, Corrosion resistant). The handle can be locked in the OFF position to comply with OSHA Lockout/Tagout regulations. Three molded-in conduit drill points are located on the top, bottom, and back surface of enclosure. Conduit hub provided: 0A inch NPT, 60A ¼ inch NPT Adjustable mounting feet (4) can be mounted in any of three positions for ease of installation Stainless steel hardware for corrosion resistance Fused disconnect switches accept Class J fuses Safety interlocked fuse access door Non-metallic enclosure meets UL 0E Type 4X (watertight) (dust-tight) and IP66 suitability requirements. Enclosure is molded of rugged Valox to resist abuse, corrosion and enhance safety. All external hardware is stainless steel Removable door for ease of wiring and installation FDS0 Lockable high visibility red handle to meet OSHA Lockout/Tagout Conduit hub and adjustable mounting feet are supplied with each Circuit-Lock Fused Disconnect Switch. Stainless steel ¼ inch turn door fasteners for quick, easy access to fuses. Enclosure door can be locked to prevent unauthorized access. Additionally, if the switch is ON, the door cannot be opened. Compact Fused Disconnect Switch accepts Class J fuses. Fuse holders are top mounted for easy access. The switch accepts auxiliary contacts for control circuit applications including the ON/OFF control of remote pilot lights or signal for programmable controllers. Valox is a trademark of SABIC Innovative Plastics, acquired from General Electric Company. Wiring Device-Kellems F-

12 Circuit-Lock Fused Disconnect Switches Suitable as Motor Disconnects Dimensions 0 and 60 Amp Fused Disconnect Switches 0A Circuit-Lock fused disconnect switch. 60A Circuit-Lock fused disconnect switch. Note: *Class J fuses not included. IP66 SUITABILITY UL Listed, CSA Certified TYPE 4, 4X and Enclosure Rating FDS0* FDS60* FDS0 Gray Style Switch HBLACFSNO HBL0MIFRS Black Style Switch Auxiliary Contacts Black Style Switch Gray Style Switch Auxiliary contact, normally open, A600 pilot duty, break before break. ACFSNO HBLACFSNO Auxiliary contact, normally closed, A600 pilot duty, break before break. ACFSNC HBLACFSNC Note: Auxiliary contacts are specific to the style switch noted and are NOT interchangeble. Replacement Switches Black Style Switch Gray Style Switch For 0A fused switches. 0MIFRS HBL0MIFRS For 60A fused switches. Gray Style switch will retro fit Black Style switch. HBL60MIFRS Note: If replacing a Black Style switch, you must use the 0MIFRS. All other applications can use the Gray Style switch. Watertight Closure Plug Kits For 0A Circuit-Lock unfused and fused Pin and Sleeve mechanical interlocks. For 60 and 0A Circuit-Lock unfused and fused Pin and Sleeve mechanical interlocks. MICPK0 MICPK60 Replacement Mounting Feet ACFSNO 0MIFRS Replacement mounting feet and screws for 0 and 60A fused mechanical interlocks. Note: 0A Units supplied with two in. NPT raintight conduit fittings. 60A Units supplied with two ¼ in. NPT raintight conduit fittings. Package of feet and screws. HBLRFT MICPK0 HBLRFT Dimensions 7.7" (84.7).60" (9.4) 9." (6.).8" (8.6) 7.9" (8.6).46" (9.6).0" (8.8).7" (4.) 4.48" (67.8).6" (90.) Dimensions in Inches (mm) 8.4" (4.) F- Wiring Device-Kellems

13 Circuit-Lock Fused Disconnect Switches Horsepower Ratings and Specifications Horsepower Ratings Ratings Volts HP Maximum HP* 0A 600V AC Max. FDS0 60A 600V AC Max. Note: *Requires time delay fuses. V AC 08-40V AC Ø 40V AC Ø 480V AC Ø 600V AC Ø Y /08V AC Ø Y 77/480V AC Ø Y 47/600V AC V AC 08-40V AC Ø 40V AC Ø 480V AC Ø 600V AC Ø Y /08V AC Ø Y 77/480V AC Ø Y 47/600V AC FDS60 Fuse and Short Circuit Information Horsepower Ratings The starting current of motors of more than the standard horsepower rating may require the use of fuses with appropriate time-delay characteristics. Short Circuit Withstand Rating Suitable for use on a circuit capable of delivering not more than 00,000 RMS symmetrical amperes at the voltage rating of receptacle when protected by Class J fuses. Note: Replacement fused switch must be the same type Hubbell switch as original and have equal or greater short circuit current withstand rating. Circuit-Lock Fused Disconnect Switch Specifications Moisture Resistance Indoor and Outdoor Type 4X (Wash down, Corrosion resistant); Indoor Type (Dust-tight, Falling Dirt, Noncorrosive Liquids). Flammability UL94-VA and V0 Classification. Operating Temperature Maximum Continuous 7 C; Minimum Continuous -40 C without impact. UV Resistance All materials are UV stabilized. Dielectric Voltage Withstands 000V AC minimum. Max. Working Voltage 600V AC RMS. Impact Resistance In accordance with UL 746C. Terminal Identification In accordance with UL, CSA and international conventions. Product Identification Identification and ratings are part of external label. Mounting External fully adjustable feet. Fuse Types UL Listed, Class J ; CSA Certified, HRCI-J. Materials Part Material Base Valox Door Valox Handle Valox Conduit Hub Zinc, 0A Fused in., 60A Fused ¼ in. Enclosure Gasket Neoprene Shaft Brass Shaft Seal Neoprene Frame Galvanized Steel Ground Plate Galvanized Steel Enclosure Screws Stainless Steel 00 Series Valox is a trademark of SABIC Innovative Plastics, acquired from General Electric Company. Wiring Device-Kellems F-

14 Wiring Devices for Hazardous Locations Features and Applications Hazardous Location Non-Fused Disconnect Switches Hubbell s hazardous location line of non-fused disconnect switches are typically used for applications with the presence of flammable gasses or vapors, ignitable dusts and fibers. They are also suitable for use in outdoor or indoor damp, wet and dirty locations or in areas where frequent wash downs, heavy rain, or water spray routinely occurs. These switches are compact in size to reduce cost and make it easier to position on the wall or piece of equipment. The enclosures are made of copper-free aluminum and have a polyester/epoxy finish to prevent corrosion. The high visibility handles can be locked out to comply with OSHA lock out/tag out regulations. Copper-free aluminum construction with electrostatically applied polyester/ epoxy finish to prevent corrosion Compact NEMA 4X enclosure and footfrint allows easy installation in tight locations 6 Stainless steel bolts Top and bottom drilled and tapped conduit entrances For use as motor disconnects Class I, Div. &, Groups B,C,D Class l, Zones &, Groups llb+ H, lla Class II, Div. &, Groups E,F,G Class III, NEMA, 4, 4X, 7(B,C,D), 9(E,F,G) Lockable handle to meet OSHA Lockout/Tagout regulations HBLB7NFDA Lockable handle to meet OSHA Lockout/Tagout regulations Large visible rotary handle with On-Off indicator allows a quick means of disconnecting power HBLB7NFD6A Features Compact size enclosures provide application flexibility with cost savings over industry standard sizes. Fewer cover bolts reduces installation and maintenance time. Gasketed flange with O-ring located inside bolt circle to seal out moisture. Rotary handle style operating mechanism with lockout provision as standard. Removable ductile mounting lugs adjust to irregular mounting surfaces. Bodies have top and bottom drilled and tapped conduit entrances for power connection. UL98 certified switch. F-4 Wiring Device-Kellems Applications Grain manufacturing and storage Industrial chemical and gas manufacturing Petroleum refining Fertilizer manufacturing Vehicle repair/paint shops Coal mining Cotton and fabric mills

15 Wiring Devices for Hazardous Locations 0, 60 and 0 Ampere Materials/Finish Enclosures: Copper-free aluminum (less than 4/ of % copper content) Cover Bolts: 6 Stainless Steel O-Ring Gasket: Silicone Finish: Grey Powder Polyester painted exterior, electrostatically applied Ratings: 600V AC, 0V DC 0 0 Amp 0, 60 and 0 Amp Unfused Hazardous Location Disconnect Switches 0A Pole disconnect switch. 0A Pole disconnect switch with auxuliary contact. 60A Pole disconnect switch. 60A Pole disconnect switch with auxuliary contact. 0A Pole disconnect switch. 0A Pole disconnect switch with auxuliary contact. Unfused Mechanical Interlocks and Plugs Amp Poles/Wires Voltage AC Receptacle Plug 0 60 HBLB7NFDA HBLB7NFDAA HBLB7NFD6A HBLB7NFD6AA HBLB7NFDA HBLB7NFDAA Pole, Wire 600V AC HBLVSQ0 HBLVP8 4 Pole, Wire 600V AC HBLVSQ04 HBLVP48 Pole, Wire 600V AC HBLVSQ60 HBLVP68 4 Pole, Wire 600V AC HBLVSQ604 HBLVP648 Note: HBLVSQ 0 amp models come standard with " drilled and tapped conduit openings top and bottom plus two " x ¾" reducers and one ¾" close-up plug for maximum flexibility. 60 amp models come with one ½" opening on top and bottom and one ½" close-up plug. HBLB7NFDA HBLVSQ04 HBLB7NFD6A HBLVP48 Horsepower Ratings Switch Amps/Phase Single Phase HP Three Phase HP DC HP V AC 0V AC 08V AC 0V AC 480V AC 600V AC 0V DC Terminal Wire Size Conduit Sizes 0A / P 0 0 #4- NPT HBLB7NFDA 60A / P #4-4 ½ NPT HBLB7NFD6A 0A / P #8- ½ NPT HBLB7NFDA Dimensions Outside Box Inside Box Mounting Dimensions A B C D E F G H I J K 0 Amp ³ ₄ 8¹ ₁₆ 6⁵ ₁₆ ⁵ ₈ ¹³ ₁₆ ¹ ₁₆ ¹ ₈ 8¹ ₈ ¹ ₄ 60 & 0 Amp 8¹ ₈ ¹ ₁₆ 7¹³ ₁₆ 4¹ ₄ 9³ ₁₆ 6⁵ ₁₆ ¹ ₂ ³ ₈ 6³ ₈ 7¹ ₂ ¹³ ₁₆ Lug Position for HBLB7NFD A-Series I G Fixed Lug Position for HBLB7NFDA Optional Position for HBLB7NFD A-Series A D F C J H E B K Dimensions in Inches (mm) Wiring Device-Kellems F-

16 AC Manual Toggle Controllers/Disconnects 0, 40, 0, 60 and 8A 600V AC Circuit-Lock controllers rated Suitable as Motor Disconnect The most complete offering of controllers with top horsepower and high amperage ratings in such a compact device. # Brass Terminal Screw Clamping plate for secure back or side wiring (0A only) Optional Side Guard For close wall applications and finger safe environments 0A, 40A and 0A Shared Features Strong on/off action with quick-make, slow break operation Provides long-life reliability,000 Amp High Fault Short Circuit Withstand Rating Thermoset Body Provides high resistance to electrical arc tracking Withstands high temperatures Excellent dimensional stability Superior dielectric strength 60A and 8A Front and Back Wiring Steel Screws and Copper Terminals Recessed Wiring Wells Finger safe environments Optional Side Finger Guards For close wall applications and finger safe environments. For 0A, 40A and 0A controllers. Four Large Silver Alloy Contacts per Pole Excellent conductivity Maximum longevity 0% Copper Contact Arm High heat management Reliability Lubrication-Free Controller Continued on/off cycling even in harsh, dust and high heat environments F-6 Wiring Device-Kellems

17 AC Manual Toggle Controllers/Disconnects 0, 40, 0, 60 and 8A 600V AC 600V AC Manual Motor Controllers/Disconnects For use in almost any industrial environment. Ideal component switch for motor control and as a disconnect. Toggle controllers can be built into equipment and enclosures for either box or panel-mount installation. Amp Poles ToggleType Wire Short Short Back/Side Back/Side Back/Side Back/Side Back/Side Side Side Side Side Back Back Front Front Back Back V AC Ø 40V AC Ø HP Rating 480V AC Ø Optional Side Guard, for close wall applications and finger safe environments. Note: *For 0A, 40A and 0A controllers. 600V AC Ø HBL78D HBL78DS HBL78DX HBL78D HBL78DS HBL784D HBL784D HBL78D HBL78D HBL786D HBL786D HBL786FWD HBL786FWD HBL788D HBL788D HBLFG0* HBL78D HBL786D HBL78D HBLFG0 Specifications Dimensions Electrical Performance Dielectric Voltage Min.,00V AC minimum for minute Electrical Life Min. 6,000 Cycles at rated switch load Max. Working Voltage 600V AC RMS Switches,000 RMS Short Circuit 0A & 40A 60A max. when protected by J fuses Withstand Rating 0A 0A max. when protected by J fuses as Motor Disconnect 60A & 8A 80A max. when protected by J fuses Short Circuit Withstand Rating All Switches A max. RK fuses as Motor Controller Mechanical Mechanical Life Min.,000 minimum cycles Switch Rating AWG Max. Terminal 0A # Accommodations 40A & 0A #8** 60A & 8A #4 Wire Type Solid and stranded copper wire only. Terminal Torque 0A 0A 0 inch pounds Switch Rating 60A 8A inch pounds Environmental Flammability UL94HB/VO Operating Temp. Max. 7 C Min. -40 C continuous without impact Listings Industrial Control File UL 08 #E7040 CSA-C. No.4 LR-4686 Note: **Use listed certified ring terminal. 0, 40 and 0 Amp Toggles.8" (8.).78" (96.0)." (7.) ON Front.6" (90.4) ON Front.8" (60.4).8" (8.) 60 and 8 Amp Toggles.8" (60.4).78" (96.0) Side Side." (8.9).9" (48.8).44" (6.0).8" (7.9) Dimensions in Inches (mm) Wiring Device-Kellems F-7

18 NEMA Disconnect Switches Suitable as Motor Disconnects Thermoplastic Cover on a Plated Steel Base Durable, non-conductive cover Shared Features HBL89D Wiring conduit knockouts ½" and ¾" NPT Top, bottom or back wire entry points Surface mount control Switch can be locked in the off position as a method of compliance with OSHA lockout/tagout All Aluminum Cover and Base Base is pre-drilled for rear surface mounting HBL79D HBL89D HBL79D Circuit-Lock NEMA Enclosures with Switch Ideal for use in industrial environments, i.e. conveyer systems, industrial fans, etc. HP Rating Amp Poles Enclosure Material V AC Ø 40V AC Ø 480V AC Ø 600V AC Ø 0 Thermoplastic HBL9D 0 Thermoplastic 0 HBL89D 0 Aluminum HBL7D 0 Aluminum 0 HBL79D Note: See page F-7 for technical information. HBL90 HBL70 Circuit-Lock NEMA Enclosures without Switch For use with switches shown on page F-7. Cover Material Base Material No. Equipment Grounds For use with 0A switch. Thermoplastic Steel HBL90 For use with 0A switch. Aluminum Aluminum HBL70 Dimensions HBL70, HBL7D and HBL79D HBL90, HBL89D and HBL9D." (80.0).4" (6.) Bottom /" x /4" Knockout Each End 0.9" (.) 4.7" (.0).7" (69.8).44" (6.9).0" (8.).0" (8.) - /" Knockouts - 0.6" (6.7) Mounting Holes.4" (87.).6" (67.) Bottom /" x /4" Knockout Each End 0.88" (.4).8" (60.) 4." (4.8).97" (0.8).76" (70.).00" (0.8) - /" x /4" Knockouts - 0.6" (6.7) Mounting Holes Dimensions in Inches (mm) Back Back F-8 Wiring Device-Kellems

19 NEMA /R and R Disconnect Switches Suitable as Motor Disconnects Circuit-Lock NEMA /R Enclosures with Switch Ideal for use on outdoor equipment. Amp Poles Enclosure Material V AC Ø 40V AC Ø HP Rating 480V AC Ø 600V AC Ø 0 Thermoplastic HBLRD 0 Thermoplastic 0 HBLRD 0 Aluminum HBLRD 0 Aluminum 0 HBLRD Note: See page F-7 for technical information. *Drill weephole to alter from NEMA to NEMA R. Equipped with HBLFG0 sidewall insulation barriers. HBLRD HBLRD Dimensions HBLRD and HBLRD HBLRD and HBLRD.99" (7.9) 4." (.6).9" (74.4).84" (46.7)." (7.).94" (0.).4" (7.7) 4.76" (.9) ON OFF 0.0" (7.6) Padlock Hole.4" (8.) - /" Hubs 4." (4.6) 0.4" (8.6) Padlock Hole." (6.4).99" (7.9) Front Side Back Front Side Circuit-Lock NEMA R Enclosures with Switch Ideal for use in outdoor environments. Amp Poles Enclosure Material V AC Ø 40V AC Ø HP Rating 480V AC Ø 600V AC Ø 0 Aluminum HBLR9D 0 Aluminum 0 HBLR89D 60 Aluminum 0 HBL6R9D 60 Aluminum 0 HBL6R9D Note: For switch specifications refer to page F-7. Circuit-Lock NEMA R Enclosures without Switch For use with switches shown on page F-7. Enclosure Material For use with 0A switch. Aluminum HBLR90 For use with 60A switch. Aluminum HBL6R90 HBLR89D HBL6R9D Dimensions HBLR90, HBLR89D and HBLR9D 4.40" (.8) HBL6R90, HBL6R9D and HBL6R9D 4.40" (.8)." (40.) 4.8" (8.7) 0." (7.9) Padlock Hole - /4" Knockouts.06" (6.9).99" (0.).0" (8.).7" (69.9)." (6.8) 0." (7.9) Padlock Hole.0".7" (8.8) (69.9).00" (0.8) - /4" x " Knockouts." (8.6) Front Bottom Front Bottom 4.8" (8.7) Dimensions in Inches (mm) Wiring Device-Kellems F-9

20 Switches 0 Ampere, 600 Volts AC Manual Motor Controllers Suitable as Motor Disconnect.78" (96.0).8" (8.).8" (60.) 4." (4.8) 4." (4.6) 4.7" (9.9)." (7.) HBL78D.97" (0.8) HBL89D." (7.) HBLRD.0" (8.) HBL79D.99" (7.9) (4) #- TAP ().0 Dia. Mtg. Holes.6" (66.).94" (0.).4" (6.) 0A 600V AC Manual Motor Controllers, Double Pole 0A, double pole, single throw, AC manual motor controller, black nylon handle, side and back wired. 0A, double pole, single throw, AC manual motor controller, black nylon handle, short toggle. 0A, double pole, single throw, AC manual motor controller. 0 piece bulk pack. HBL78D in HBL90 Type enclosure with non-metallic cover, ½ in. and ¾ in. knockouts on top, bottom and back of steel frame. HBL78D in HBL70 metal Type enclosure. HBL78D in NEMA R non-metallic enclosure. HBL78D in HBLR90 metal Type R enclosure. HBL78D in NEMA R flip-lid enclosure. Note: See page F-7 for technical information. 0A 600V AC Manual Motor Controllers, Three Pole 4.40" (.8) 6.96" (76.8) HBL78D HBL78DS HBL78DX HBL9D HBL7D HBLRD HBLR9D HBLRD 0A, three pole, single throw, AC manual motor controller, HBL78D black nylon handle, side and back wired. 0A, three pole, single throw, AC manual motor controller, HBL78DS black nylon handle, short toggle. HBL78D in HBL90 Type enclosure with non-metallic cover, HBL89D ½ in. and ¾ in. knockouts on top, bottom and back of steel frame. HBL78D in HBL70 metal Type enclosure. HBL79D HBL78D in NEMA R non-metallic enclosure. HBLRD HBL78D in HBLR90 metal Type R enclosure. HBLR89D HBL78D in NEMA R flip-lid enclosure. HBLRD 0A, 600V, three pole, rotary controller in NEMA 4X HBLSD stainless steel enclosure. 0A, 600V, three pole, rotary controller in NEMA 4X non-metallic enclosure. HBLXD Note: See page F-7 for technical information. Motor Rating Product V AC 40V AC 480V AC 600V AC Phase 0A Double Pole HP HP HP HP 0A Three Pole HP 7½HP HP 0HP 40A Double Pole HP HP HP HP 40A Three Pole HP 7½HP HP 0HP 0A Double Pole HP HP HP HP 0A Three Pole HP 7½HP HP HP 60A Double Pole - HP HP 0HP 60A Three Pole - HP HP 0HP 8A Double Pole - HP HP 0HP 8A Three Pole - HP HP 40HP 4.76" (.9) 0.0" (7.6) Padlock Hole." (40.) 6.7" (7.) HBLRD.99" (7.9) 4." (.6) HBLR89D.00" (76.) HBLSD 4.00" (.6) Dimensions in Inches (mm) F-0 Wiring Device-Kellems

21 AC Switches 40, 0, 60 and 8 Ampere, 600 Volts AC Manual Motor Controllers Suitable as Motor Disconnect 40A 600V AC Manual Motor Controllers 40A, double pole, single throw, AC manual motor controller, black nylon handle, side wired. 40A, three pole, single throw, AC manual motor controller, black nylon handle, side wired. Note: See page F-7 for technical information. IP44* SUITABILITY HBL784D HBL784D.78" (96.0).8" (8.).8" (60.).8" (8.9).40" (.) #- TAP." (8.7).8" (7.6) 0A 600V AC Manual Motor Controllers 0A, double pole, single throw, AC manual motor controller, black nylon handle, side wired. 0A, three pole, single throw, AC manual motor controller, black nylon handle, side wired. Note: See page F-7 for technical information. HBL78D HBL78D.0" DIA (.)." (8.) HBL786D.8" (8.9).40" (.).7" (44.) #- TAP 60A 600V AC Manual Motor Controllers 60A, double pole, single throw, AC manual motor controller, black nylon handle, back wired. Same as HBL786D except front wired. HBL786FWD in Type R enclosure. 60A, three pole, single throw, AC manual motor controller, black nylon handle, back wired. Same as HBL786D except front wired. HBL786FWD in a Type R enclosure. 60A, 600V, three pole, rotary controller in NEMA 4X stainless steel enclosure. 60A, 600V, three pole, rotary controller in NEMA 4X non-metallic enclosure. Note: See page F-7 for technical information. HBL786D HBL786FWD HBL6R9D HBL786D HBL786FWD HBL6R9D HBL6S6D HBL6X6D.78" (96.0).8" (8.).0" DIA (.).8" (60.)." (8.) HBL786FWD 4.40" (.8).7" (44.).8" (7.6)." (8.7) 8A 600V AC Manual Motor Controllers 8A, double pole, single throw, AC manual motor controller, black nylon handle, back wired. 8A, three pole, single throw, AC manual motor controller, black nylon handle, back wired. Note: See page F-7 for technical information. HBL788D HBL788D." (6.8).00" (76.) HBL6R9D Motor Controller Accessories Finger Guards, fit 0A, 40A and 0A controllers. Auxiliary Contacts, NO/Common/NC, for use in rotary switches only. HBLFG0 HBLAUX 6.9" (76.) 8.00" (0.) 4.00" (.6) HBL6S6D Dimensions in Inches (mm) Wiring Device-Kellems F-

22 NEMA 4X Disconnect Switches Suitable as Motor Disconnects Shared Features Un-drilled case allows custom placement of wire entry Switch can be locked in the off position as a method of compliance with OSHA lockout/tagout Hinged Cover with Removable Continuous Pin 04 Stainless Steel Enclosure Chemical and corrosion resistant Valox Handle and Collar Chemical and impact resistant Thermoplastic 4X Non-Metallic Enclosures HBLSD Poured in Closed Cell Neoprene Gasket Interlocking Shaft and Handle Prevents cover removal when switch is on Up to Optional Auxiliary Contacts For PLCs and external indicators HBLXD HBL6S6D Dimensions HBLSD HBLXD Circuit-Lock NEMA 4X Enclosures with Switch and Accessories Ideal for use in environments where wash-down is necessary, i.e. food processing, laboratories, etc. Amp Poles Enclosure Material V AC Ø HBL6S6D 40V AC Ø HP Rating 480V AC Ø 600V AC Ø 0 Stainless Steel 0 HBLSD 0 Valox 0 HBLXD 60 Stainless Steel 0 HBL6S6D 60 Valox 0 HBL6X6D Finger Guard option for 0A switch. NO/Comon/NC auxiliary contact, A /0V AC for 0 and 60 Amp switches. Note: See page F-7 for technical information. HBLFG0 HBLAUX 6.9" (76.) 6." (4.9) 6.96" (76.8) 4.00" (.6) 6.00" (.4) 6." (4.9) 8.7" (.) 8.00" (0.) 9.44" (9.8) 7.44" (89.0) 6.7" (7.) 4." (8.0) 4.00" (.6) 4." (8.0) Front Side Front Side Dimensions in Inches (mm) Valox is a trademark of SABIC Innovative Plastics, acquired from General Electric Company. F- Wiring Device-Kellems

23 Pendant Pushbutton Stations CPB and PBS Series CPB Series Compact Pendant Stations, Two Button, NEMA 4X Single-speed normally open-normally closed without mechanical interlock. Single-speed with mechanical interlock between pushbuttons. Two-speed with mechanical interlock between pushbuttons. Note: Included with product: nylon cord grip and sealing washer (must be installed to achieve NEMA 4X rating). Indication label pack. Cord dia. range.7.6 in. (9..9) Ambient temperatures: F to 40 F ( C to 60 C). Typical applications: Package electric motor hoists. Remote control of machinery. IP SUITABILITY CPB0 CPB CPB 9." (.9).06" (6.9) Contact Ratings, CPB Series Single-Speed Voltage Current AC V 6A % PF 40V A DC V.A IND 0V.A Two-Speed Voltage Current AC V A % PF 40V.A PBS Series Heavy Duty Pendant Pushbutton Stations, NEMA R button, single speed. button, two speed. 4 button, single speed. 4 button, two speed. 6 button, single speed. 6 button, two speed. 8 button, single speed. 8 button, two speed. Product Dimensions, PBS Series IP44 SUITABILITY PBS PBS PBS4 PBS4 PBS6 PBS6 PBS8 PBS8 Style A Approx. Wt. Assembled button 7.88" (00.0). lbs PBS 4 button.69" (47.6) 4. lbs PBS4 6 button 8.0" (47.). lbs PBS6 8 button." (66.7) lbs PBS8 Note: Housing: Yellow vinyl rubber. CPB Wiring Diagram CPB Series Momentary (On / Off) CPB0 N.O. Com. N.C. Single Speed* CPB Top Top N.O. Two Speed* CPB Top PBS6 Ctr. Ctr. Com. TAB.8" (60.) N.O. N.O. N.O. Ctr. *Mechanical floating ball interlock prevents activating both Pushbuttons simultaneously. Bott. Bott. Bott. Cable Entrance Threaded " (.4) NPT I.D.." (8.6) O.D. Contact Interrupting Ratings, PBS Series Two-Speed Single Break Voltage Current AC V 6A 0mm K.O. % PF 40V A DC V.4A A IND 0V.A Single-Speed Double Break Voltage Current AC V 6A % PF 40V A DC V.A IND 0V.A." (8.6) 0.88" (.4).0" (88.9) Dimensions in Inches (mm) Wiring Device-Kellems F-

24 Pendant Pushbutton Stations Accessories and Replacement Parts PG MS PG6 MS Replacement Inserts When the insert switches are in need of replacement, simply unplug the old insert and plug in a new one. Single speed insert momentary N.O. and N.C. On-Off insert (no mechanical interlock). Momentary, start-stop, reset-stop. or speed insert, momentary. Used to a maximum of speed points. MS speed insert, momentary. Used to a maximum of speed points. For five speed MS applications replace an existing terminal board with the TB terminal board and replace an existing insert with the five speed (MS) insert. Conversion Inserts In addition to single speed and two speed applications, pre-assembled units can be adapted to handle other applications. PG PG6 TB Terminal board, required for each insert switch PG, PG6 and MS. Terminal board, required for insert switch MS. TB TB TB Accessories Indicator labels for replacement package contains each: hoist, trolley, bridge, PBSLP forward-reverse, raise-lower, in-out, right left, east-west, north-south, reset-stop, start-stop, power, main hoist, auxuliary hoist, on-off, up-down. Rubber button cover for replacement purposes. PBSBC V red pilot light for 4, 6, and 8 button units only. PBSPL* Note: *Each pendant station can accommodate one of the pilot light in the.0 in. (0.6) diameter mounting hole. PBSLP PBSPL PBSBC Kellems Deluxe Aluminum Cord Fitting Outdoor or indoors where subject to moisture, splash or submersion. Kellems grips provide strain relief for multi-conductor cable. Cord Range Kellems grip..70"-.87" (9-.) 0740 Kellems grip..87"-.00" (.-.4) F-4 Wiring Device-Kellems