Pumps & Filters. Partner for Solutions
|
|
- Marybeth Hampton
- 6 years ago
- Views:
Transcription
1 Pumps & Filters ASV Stübbe GmbH & Co. KG Hollwieser Str. D-6 Vlotho, Germany Tel.+9() Fax +9() /6 Partner for Solutions
2 We make products for three different industrial sectors Chemical industry The chemical industry places the highest demands on equipment. Safety and reliability are the top priority and ASV products meet the highest quality standards. The ASV standard chemical pumps ensure maximum operating safety and reliability. They are produced using corrosion and wear resistant plastics sourced from certified quality manufacturers. The materials used are high molecular polyethylene (PE), ultra-high molecular polyethylene (Hostalen GUR), polypropylene (PP) or polyvinylidene fluoride (PVDF). Every ASV Stübbe pump is rigorously tested and supplied with a test and acceptance certificate. Environmental technology In water treatment as well as in flue gas cleaning, ASV Stübbe pumps have proven themselves in tough industrial environments. In addition to being an economically effective investment, their minimised operating costs and fail safe operation are prominent. The extensive product range from Vlotho has an excellent reputation worldwide. The correct selection of design, construction, material and rotational speed by our qualified engineers during the project planning phase guarantees the maximum long term reliability and operating safety at our customers plants. Surface technology Worldwide, production equipment in the electronics and automotive industries, such as wet processing lines, electroplating systems and lacquering lines are equipped with ASV Stübbe pumps which match the application superbly. Whether it s sump pumps proven countless times, seal-less pumps for dangerous or readily crystallising fluids or highly abrasive resistant pump components of high density polyethylene, we can provide a bespoke solution tailored to your requirements. ASV pumps are manufactured at production sites in Vlotho, Germany, and Shenzhen, China. Customer satisfaction and reliable product support can only be guaranteed by being close to our customers as well as having an extensive service network.
3 ASV Stübbe sets standards in performance & reliability Centrifugal pumps with mechanical seal NM NMB NMB-S KHB SAP PB Magnetically driven pumps ASV-MAX MAMB KMB SMB Eccentric pumps Type F Type L Modern production methods and highly qualified employees ensure high-end quality products. As an internationally active company, ASV Stübbe produces and supplies valves, pumps, measurement and control systems. Sump pumps ET ETL ETLB ETLB-X ETMB Filters Filter station Accessories Buffer fluid systems Pump monitors Filters and Accessories Vertical pumps ASV Shenzhen
4 6 7 Centrifugal pumps with mechanical seals Centrifugal pumps with sealed shaft NM NMB NMB-S KHB SAP PB up to m /h up to m PE-HD up to 6 C PP up to 8 C PVDF up to C DN DN up to kw Unit category up to m /h up to 6 m PE-HD up to 6 C PP up to 8 C PVDF up to C DN DN 8 up to 7. kw Unit category up to m /h up to 6 m PE-HD up to 6 C PP up to 8 C PVDF up to C DN DN 8 up to kw Unit category up to m /h up to m PE-HD up to 6 C PP up to 8 C PVDF up to C DN DN up to. kw Unit category up to m /h up to. m /h up to m up to 6 m PE-HD up to 6 C PP up to 7 C PP up to 8 C PVDF up to 8 C PVDF up to C PTFE up to 9 C DN DN DN up to. kw. kw Unit category used to convey aggressive fluids, such as acids and alkalines meet high requirements with regard to resistive properties of the components used Standard chemical pump NM, NMB and NMB-S The ASV standard chemical pumps NM, NMB and NMB-S made of thermoplastics are single-stage, single flow spiral casing pumps of horizontal design with axial suction socket and radial pressure socket according to DIN 6 and ISO 88. Centrifugal pumps, type series KHB The ASV centrifugal pump, type KHB rounds off the bottom line of the range of centrifugal pumps with seals. The thick walled, injection moulded pump casing of HD- PE, PP or PVDF guarantees safe and reliable use up to a fluid temperature of C (PVDF). Thermoplastic centrifugal pump Type series NM Materials include high molecular polyethylene (PE), ultrahigh molecular polyethylene (Hostalen GUR), polypropylene (PP) or polyvinylidene fluoride (PVDF). External forces are absorbed by the metal armouring of the casing. All metal components not made of stainless steel are corrosion protected by multiple coating with a high-quality protection lacquer. Mechanical seals The shaft is sealed by a single or double mechanical seal of various systems and makes. Glide surface combination: silicium carbide against silicium carbide (SIC/SIC) and others. O-rings and liner made of Viton (FPM) or Hypalon (CSM), metal components made of stainless steel (VA) or Hastelloy as standard. Option: ECTFE (Halar) coated Circulation, lubrication, quench or sealing liquid depending on the individual application Single or double acting shaft seal, as required, combined with ASV buffer fluid or lubrication fluid systems securely seal off the pump to the outside. The KHB pump is designed and built for industrial and chemical applications Self-priming thermoplastic pump, type series SAP The SAP pump made of thermoplastic material is a horizontal centrifugal pump with integrated injector nozzle of a Venturi type. In this patented design, the pump is capable of self-priming up to a 7 m head (water) with the container filled. Typically, conventional thermoplastic pumps are not selfpriming unless equipped with a self-priming container. Peripheral pump, type PB The thermoplastic pump PB is a horizontal peripheral pump, equipped with a star impeller for high heads. The pressure is built up in accordance with the physical principle of pulse exchange. Even at low flow rates of below l/h, heads of up to 6 m can be achieved.
5 8 9 Thermoplastic centrifugal pump, type series NM Thermoplastic centrifugal pump, type series NMB up to m /h up to m PE-HD up to 6 C PP up to 8 C PVDF up to C DN DN up to kw Unit category Horizontal, single-stage, non self-priming chemical pump according to DIN 6, EN 88, ISO 88 with single flow spiral casing of modular concept to Axial suction socket and radial pressure socket Closed or half-open radial impeller Axial thrust compensation by relief bores Impeller mounting independent of the rotational direction Max. fluid viscosity: 6 mpas (cp) Corrosion protection by a C paint coat Three-phase motor up to kw acc. to IEC Bend resistant stainless steel shaft Shaft protection sleeve of carbon or thermoplastic Shaft bearing in an undivided bearing mounting with grease lubricated roller bearing Option: oil lubricated shaft bearing Container for self-priming (non self-priming as standard) Steel base plate according to DIN 9 Housing drainage Option: circulation Smooth starting unit up to m /h up to 6 m PE-HD up to 6 C PP up to 8 C PVDF up to C DN DN 8 up to 7. kw Unit category Horizontal, single-stage, non self-priming chemical pump according to DIN 6, EN 88, ISO 88 with single flow spiral casing of modular concept Compact design to 8 Pump head directly flanged to the motor by means of a wafer flange fitting Axial suction socket and radial pressure socket Closed or half-open radial impeller Axial thrust compensation by relief bores Impeller mounting independent of the rotational direction Max. fluid viscosity: 6 mpas (cp) Corrosion protection by a C paint coat Three-phase motor up to 7. kw acc. to IEC Extended stainless steel shaft to accommodate the pump impeller Shaft protection sleeve of carbon or thermoplastic Fast pump installation into the pipeline system, alignment of pump and motor not required Container for self-priming (non self-priming as standard) Housing drainage Option: circulation Smooth starting unit Characteristic curves diagram NM n = min - ( Hz) n = 9 min - ( Hz) Characteristic curves diagram NMB n = min - ( Hz) n = 9 min - ( Hz) Fˆrderhˆhe H (m) Förderstrom Q (m /h) Förderstrom Q (m /h) Förderstrom Q (m /h) Förderstrom Q (m /h)
6 Thermoplastic centrifugal pump, type series NMB-S Thermoplastic centrifugal pump, type series KHB up to m /h up to 6 m PE-HD up to 6 C PP up to 8 C PVDF up to C DN DN 8 up to kw Unit category Horizontal, single-stage, non self-priming chemical pump according to DIN 6, EN 88, ISO 88 with single flow spiral casing of modular concept Compact design to 8 Pump head directly flanged to the motor by means of a wafer flange fitting Axial suction socket and radial pressure socket Closed or half-open radial impeller Axial thrust compensation by relief bores Impeller mounting independent of the rotational direction Max. fluid viscosity: 6 mpas (cp) Corrosion protection by a C paint coat Three-phase motor up to kw acc. to IEC Torque transmission via additional plug-type shaft running in bearings Shaft protection sleeve of carbon or thermoplastic Accessories: Container for self-priming (non self-priming as standard) Housing drainage Option: circulation Smooth starting unit up to m /h up to m PE-HD up to 6 C PP up to 8 C PVDF up to C DN DN up to. kw Unit category Horizontal, single-stage, non self-priming close coupled pump with single-flow, injection moulded spiral casing in compact design 8 to Pump head directly flanged to the motor by means of a drive lantern Housing and impeller made of HD-PE, PP or PVDF Stainless steel screws (.) Axial suction socket and tangential pressure connection Closed or half-open impeller Impeller mounting independent of the rotational direction, with fluid-tight encapsulation Mechanical seal, single or double acting Max. fluid viscosity: 6 mpas (cp) Corrosion protection by a C paint coat Three-phase motor in sizes acc. to IEC Extended stainless steel shaft to accommodate the pump impeller Shaft protection sleeve of thermoplastic or carbon Accessories: Container for self-priming (non self-priming as standard) Option: circulation Characteristic curves diagram NMB-S n = min - ( Hz) n = 9 min - ( Hz) Characteristic curves diagram KHB n = 9 min - (Hz) Förderstrom Q (m /h) Förderstrom Q (m /h),, Förderstrom Q (m /h)
7 Thermoplastic pump, type series SAP Peripheral pump, type PB up to m /h up to m PE-HD up to 6 C PP up to 8 C PVDF up to C DN DN up to. kw Self-priming, single stage horizontal centrifugal pump with patented valve technology (EP 6..A) and integrated modular nozzle system to Pump head directly flanged to the motor by means of a drive lantern Housing and impeller made of HD-PE, PP or PVDF SAP and SAP with threaded socket acc. to DIN 86 SAP and SAP with flange connection acc. to DIN Closed impeller Impeller mounting independent of the rotational direction, with fluid-tight encapsulation Mechanical seal, single or double acting Valve technology in accordance with the Venturi principle for self-priming once the pump housing is filled Max. suction height: 7 m WC Max. fluid viscosity: 6 mpas (cp) Filling and draining connection with threaded plug Housing with connection for buffer or lubrication fluid Max. fluid viscosity: 6 mpas (cp) Corrosion protection by a C paint coat Three-phase motor. kw to. kw acc. to IEC Extended stainless steesl shaft to accommodate the pump impeller Thermoplastic shaft protection sleeve up to. m /h up to 6 m PP up to 7 C PVDF up to 9 C PTFE up to 9 C DN. kw Unit category single-stage, horizontal thermoplastic peripheral pump of modular design Size: Pump head directly flanged to the motor by means of a drive lantern PP or PVDF housing PTFE impeller Stainless steel screws (.) Pressure and suction socket with flange connection act. to DIN or, as an alternative, with threaded socket acc. to DIN 86 Impeller as a hydraulically balanced star impeller Pressure build-up by pulse exchange for high heads Max. fluid viscosity: 6 mpas (cp) Impeller mounting independent of the rotational direction, with fluid-tight encapsulation Mechanical seal, single or double acting Corrosion protection by a C paint coat Three-phase motor. kw or. kw Extended stainless steel shaft to accommodate the pump impeller Thermoplastic shaft protection sleeve Accessories: Characteristic curves diagram SAP n = 9 min - ( Hz) Accessories: Characteristic curves diagram PB n = 9 min - ( Hz) ,, Förderstrom Q (m /h),, Förderstrom Q (m /h)
8 Magnetically driven pumps Magnetically driven pumps ASV-MAX MAMB KMB SMB up to m /h up to m PP-GF up to 9 C ETFE-CF up to C DN DN. kw Unit category up to m /h up to m PVDF up to 8 C ETFE up to 9 C DN DN 6 up to 8. kw up to m /h up to m PP up to 7 C PVDF up to 9 C DN DN up to. kw up to 7. m /h up to. m PP-GF up to 8 C PVDF up to 8 C DN up to. kw Unit category Unit category Horizontal magnetically driven centrifugal pumps Horizontal magnetically driven centrifugal pumps are pumps without seals. Power transmission from the motor drive to the pump impeller is contactless through a magnetic coupling. The coupling halves are separated by a hermetically sealed thermoplastic rear cover. The magnetic rear cover prevents power dissipation by eddy currents. This results in a number of system inherent advantages: Safe delivery of acids, alkalines and saline solutions free of solid particles. Hermetically sealed pumps are especially used for the delivery of fluids presenting an odour nuisance, toxic, heavily crystallising or dangerous media. Contamination of the environment or hazards to personnel are eliminated. Magnetically driven pumps do not suffer fluid leakages as loss of valuable fluids is excluded by the design. Magnetically driven pumps are equipped with a hermetically sealed encapsulation and come without shaft seals. No maintenance requirement when used for the delivery of heavily crystallising fluids. Dry-running capable magnetically driven centrifugal pump ASV-MAX In addition to the usual advantages of a seal-less, magnet-coupled pump, the ASV-MAX type series distinguishes itself by its short-duration dry-running capability. The patented sliding bearing of HD carbon/ceramic is not suitable for continuous dry-running operation but running for a short time without fluid will not cause any damage. The ASV-MAX is equipped with flange connections permitting convenient replacement and can also accept flange connections from other manufacturers. Cost and time intensive modifications of the connecting pipework is not required and production down time in the event of a problem are reduced. The new optimised hydraulic system for an exceptionally high degree of efficiency is another contribution towards cutting operating costs. Magnetically driven pump Type series MAMB Thermoplastic lined magnetically driven centrifugal pump MAMB With full metal encapsulation of the internal thermoplastic spiral casing, the MAMB centrifugal pump reaches an exceptionally high resistance at operating temperatures up to 9 C. PVDF or ETFE lining is available. Combining the resistance properties of metal and the chemical resistance of thermoplastic guarantees high operating safety and reliability. Small magnetically driven centrifugal pumps KMB and SMB The models KMB and SMB are sealless, horizontal and non self-priming close coupled pumps. Due to their design, these leakage-free pumps avoid environmental damage when delivering hazardous substances (ChemG) and ground water endanagering fluids (WHG). Magnetically driven pump Type series ASV-MAX
9 6 7 Magnetically driven centrifugal pump, type series ASV-MAX Magnetically driven centrifugal pump, type series MAMB Horizontal, hermetially sealed centrifugal pump with magnetic coupling, dry-running capable Horizontal, hermetially sealed centrifugal pump, power transmission through magnetic coupling up to m /h up to m PP-GF up to 9 C ETFE-CF up to C DN DN x.7 to 6x 6. Threaded flanges with slots Parts coming into contact with the fluid made of PP-GF or ETFE-CF The impeller runs in ceramic bearings with radial and axial guidance through the pump axis Ceramic axial bearing, SiC Sliding bearing made of SiC or HD carbon Closed radial impeller Power transmission through a central rotary coupling with overload protection Magnets with a high energy density Encapsulation of the internal magnet mounting in diffusion tight design Stationary, non-magnetic rear cover made of PP-GF or ETFE-CF to avoid the loss of eddy current Max. fluid viscosity: 6 mpas (cp) Corrosion protection by a C protection paint coat up to m /h up to m PVDF up to 8 C ETFE up to 9 C DN DN 6 x to 8x6 6 Suction and pressure socket acc. to EN 88, ISO 88 Thermoplastic lined cast steel spiral casing Parts coming into contact with the fluid made of PVDF or ETFE. Impeller shaft: ceramic or SSiC Bearings in the following material combinations: SSiC x SSiC Closed radial impeller Power transmission through a central rotary coupling with overload protection Magnets with a high energy density Encapsulation of the internal magnet mounting in diffusion tight design Stationary, non-magnetic rear cover to avoid the loss of eddy current Max. fluid viscosity: 6 mpas (cp) Corrosion protection by a C protection paint coat. kw Three-phase motor, from.7 kw to. kw up to 8. kw Three-phase motor, from. kw to 8. kw Unit category Self-priming container for self-priming up to a suction height of m Smooth starting unit Unit category Self-priming container for self-priming Smooth starting unit Characteristic curves diagram ASV-MAX Characteristic curves diagram MAMB n = 9 min - ( Hz) n = min - (6 Hz) n = 9 min - ( Hz) n = min - (6 Hz) 6 H 6 6 H H 6 6 x 6 x 6 x 8 x x 6 x 6 x 8 x Förderstrom Q (l/min) 6 8 Förderstrom Q (l/min) 6.. Förderstrom (l/min) 6.. Förderstrom (l/min)
10 8 9 Small magnetically driven centrifugal pump KMB Small magnetically driven centrifugal pump SMB Horizontal, hermetically sealed centrifugal pump in modular design with magnetic coupling Horizontal, hermetically sealed centrifugal pump in modular design with magnetic coupling up to m /h up to m -8 and - Housing: PP or PVDF Impeller: PP or PVDF Magnets: Magnets with a high energy density, internal solenoid mounting with diffusion-tight encapsulation Fluid lubricated sliding bearings: SiC ceramic, size - 8 also carbon O-rings: CSM, FPM, size - also PTFE Max. fluid viscosity: 6 mpas (cp) Three-phase motor,. kw or. kw, IP Corrosion protection by a C protection paint coat up to 7. m /h up to. m SMB and SMB Housing: PP-GF or PVDF Impeller: PP-GF or PVDF Rear cover: PP-GF or PVDF Magnets: Solenoids with a high energy density, internal solenoid mounting with diffusion-tight encapsulation Max. fluid viscosity: 6 mpas (cp) Bearing: Silicium carbide Aluminium oxide 99 Rulon PP up to 7 C PVDF up to 9 C DN up to. kw Self-priming container for self-priming Smooth starting unit PP-GF up to 8 C PVDF up to 8 C DN up to. kw Three-phase motor,.8 kw or. kw, IP Corrosion protection by a C protection paint coat Self-priming container for self-priming Unit category Characteristic curves diagram KMB n = 9 min - ( Hz) n = 9 min - ( Hz) n = min - (6 Hz) SMB SMB 8 6 SMB SMB,, Förderstrom Q (m /h) 6 Förderstrom Q (m /h) 8 6 Förderstrom Q (m /h) 8
11 Eccentric pumps Eccentric pumps F L Delivery volume up to.8 m /h up to m PE-HD up to 6 C PP up to 8 C PVDF up to C PTFE up to C DN DN up to.7 kw Unit category up to. m /h up to m PE-HD up to 6 C PP up to 8 C PVDF up to C PTFE up to C DN DN 8 up to. kw Unit category ASV Eccentric pumps The ASV eccentric pump series F and L made of thermoplastic are dry-running capable, self-priming (positive) displacement pumps of horizontal design, also suitable for higher viscosity fluids. Eccentric pumps are superior to conventional thermoplastic centrifugal pumps that, in general, are not selfpriming. PVC-U, PP, HD-PE or PVDF are used as housing materials. Depending on the individual application and the material resistance, CR, NBR, CSM, EPDM or FPM can be chosen as liner material. Eccentric pump, type F Design features and operating principle The eccentric pump is a rotating displacement pump. The thermoplastic pump housing accommodates the liner which is pinched between the housing and cover plate or the motor lantern or bearing block for fluid tightness; the liner ridge separates the suction compartment from the pressure compartment. The rotor running in an eccentric bearing rotates in roller bearings on a cam at the central drive shaft. The surface between the rotor and liner has an oil film. It is separated from the large roller bearings by a simple mechanical seal. The motor equipment allows the use of two optional frequency changers: Type series F and L at constant rotational speed (frequency converter) Type series FF and LF with variable rotational speed s controlled according to the requirement guarantee low energy consumption and optimum efficiencies; as such, they contribute to control of operating costs. The rotational speed can be manually set at the potentiometer or fully automatically controlled in the PID control circuit via scaled signal (... V,... ma, etc.). Guide values established by means of sensors include fluid properties, such as, for instance, ph value, electrical conductivity, temperature, etc. Furthermore, the rotational speed can be controlled by measuring values, such as flow rate, pressure, suction height, etc. This allows the operating point to be adapted to the current requirements. ASV eccentric pumps deliver: alkaline or acidic fluids solvents, paints and adhesives water in a wide range of purities waste water, precipitants, flocculents, chemicals and pharmaceuticals electroplating baths and baths in the photo and film industry various fluids in the paper, textile and leather industries Further fields of application include the electrical / electronics industries and environmental technologies. Our pump specialists would be pleased to answer your questions with regard to application, chemical resistance and continuous operation.
12 Eccentric pump F/FF Eccentric pump L/LL The ASV eccentric thermoplastic pump series F/FF are dry running capable, self-priming displacement pumps of horizontal design. The ASV eccentric thermoplastic pump series L/LL are dry running capable, self-priming displacement pumps of horizontal design. Delivery volume up to.8 m /h up to m PE-HD up to 6 C PP up to 8 C PVDF up to C PTFE up to C DN DN up to.7 kw F, F9, F, F6, F Thermoplastic pump housing with liner directly flanged to the motor Stainless steel screws (.) Connections for industrial hoses Mechanical seal Max. suction height: m WC suitable for higher viscous fluids up to max. mpas (cp) Drive with a C corrosion protection coat phase or three-phase motor, directly flanged Stainless steel shaft (.) Accessories: Vibration and pulsation damper Suction basket Frequency control Delivery volume up to. m /h up to m PE-HD up to 6 C PP up to 8 C PVDF up to C PTFE up to C DN DN 8 up to. kw L, L9, L, L6, L, L7, L Thermoplastic pump housing with liner Stainless steel screws (.) Connections for industrial hoses Mechanical seal Max. suction height: m WC suitable for higher viscous fluids up to max. mpas (cp) Drive with a C corrosion protection coat Single phase or three-phase motor on base plate with drive motor, elastic coupling and contact protection acc. to EN9/DIN Stainless steel shaft (.) Accessories: Vibration and pulsation damper Suction basket Frequency control Unit category Unit category Characteristic curves diagram, type Typ F min - Characteristic curves diagram, type Typ L min - (L, L 9, L6, L ) 96 min - (L 7, L ) F 6 diskonti nuierlicher Pumpenbetrieb L 6 diskonti nuie rlicher Pumpenbetri kontinuierlicher e Pumpenbetrieb kontinuierlicher r Pumpenbet rieb F F 9 F F L L 9 L L L 7 L,, Förderstrom Q (l/min),, Förderstrom Q (l/min)
13 Vertical pumps sump pumps Sump pumps ET ETL ETLB ETLB-X ETMB Delivery volume up to m /h up to 8 m /h up to m /h up to m /h up to m /h up to m up to 6 m up to 6 m up to m up to 6 m Immersion depth up to, mm up to 7 mm up to 79 mm up to 7 mm up to 7 mm PP up to 9 C PP up to 9 C PP up to 7 C PP up to 7 C PP up to 7 C PVDF up to C PVDF up to C PVDF up to 9 C PVDF up to 9 C PVDF up to 9 C DN DN 8 DN DN 8 DN DN 8 DN... DN DN up to kw up to kw up to 7. kw up to. kw up to. kw Sump pumps ASV sump pumps are single or multi-stage vertical thermoplastic chemical centrifugal pumps configured according to the modular design principle. In their standard version, the sealless ASV thermoplastic sump pumps are designed for use in open or closed pressureless containers or pits/trenches. Compact close coupled sump pumps as single or multistage and magnetically coupled model series complement our range to solve every application task. Special designs, such as with titanium shafts and titanium labyrinth seals can be built at the customer s request. Each pump unit is subjected to a test run according to DIN 9 and supplied with a certificate as per DIN 9, if requested. Sump pump ETLB ASV Thermoplastic sump pump ET The ASV sump pumps running in bearings are singlestage vertical thermoplastic chemical centrifugal pumps strictly built in accordance with the modular design prinicple. The immersion depths of the ASV sump pumps ET range from to, mm in mm increments. ASV Thermoplastic sump pump ETL The sump pumps of the ETL series are also suitable for vertical use in pressure-less containers, open basins or in pump pits. The shaft bearings do not come into contact with the fluid, the ETL pumps feature dry-running safety, wear resistance and exceptional running smoothness. ASV Thermoplastic close coupled sump pump ETLB The ETLB series is designed as a cost efficient close coupled sump pump. By the thousands, it is used worldwide, for example, in PCB production plants, flat screen and solar panel production. Also this series is absolutely dry running safe. Heavily crystallising fluids require special equipment with titanium shafts and titanium labyrinth seals. ASV Thermoplastic close coupled sump pump ETMB The magnetically coupled ETMB series is built to deliver heavily degassing or crystallising, toxic and explosive fluids. The ETMB is also available as a dry running capable version. Tailor-made solutions and accessories Sump pumps frequently have to be adapted to geometrical and hydraulic plant conditions. Upon customer request, mounting plates, fastening holes and pressure pipe branches can be designed to meet the requirements of the individual installation situation. Suction extensions up to, mm guarantee complete container discharge. Where coarse solid particles are encountered, strainers ensure fault-free operation of the sump pumps. In restricted space situations, e.g. in basins, the pump is externally placed at the self-priming container. When one of the limit values is reached, the pumps are reliably controlled by the level control system. Vertical pumps ASV Thermoplastic close coupled sump pump ETLB-X This multi-stage ETLB-X version is designed for heads up to m.
14 6 7 ASV Thermoplastic sump pumps, type series ET ASV Thermoplastic sump pumps, type series ETL Vertical single-stage sump pump running in bearings ET -8 to ET 8- Vertical single-stage sump pump, dry running safe Immersion depths between and mm in mm increments Materials: PP, PVDF Pump shaft running in double bearings to increase stability Triple bearings as from an immersion depth of, mm Integrated pressure relief of the sliding bearings to protect from solid matter Standard gliding material combination: Teflon/carbon/ graphite (PTFE/C/CSb) against SiC Alternative: SiC/SiC or SiC/C dry running capable Axial thrust relief by vanes on the back Pump shaft encapsulated in a thick-walled shaft protection sleeve. Pump impeller fitted independent of the rotational direction Corrosion protection by a C protection paint coat ETL - to ETL 8- Immersion depth: mm and 7 mm Materials: PP, PVDF Thermoplastic spiral casing flanged to the immersion tube with stainless steel or PVDF screws Closed impeller, fastened independent on the rotational direction. Stainless steel shaft separated from the fluid by a thick-walled thermoplastic protection tube Shaft lead-through at the mounting plate protected from fluid vapours by means of V-ring/SiC disc Radial and axial forces are absorbed by sealed roller bearings Corrosion protection by a C protection paint coat Vertical pumps Delivery volume up to m /h up to m up to, mm PP up to 9 C PVDF up to C DN DN 8 up to kw Three-phase motor, from. kw to kw Drive unit encapsulation to protect against aggressive surrounding atmosphere Motor bearing relief by an electric coupling external bearing lubrication dry running capable sliding bearings single acting mechanical seal Dry run protection device Suction basket / suction extension Delivery volume up to 8 m /h up to 6 m up to 7 mm PP up to 9 C PVDF up to C DN DN 8 up to kw Three-phase motor, from. kw to kw Drive unit encapsulation to protect against aggressive surrounding atmosphere Suction basket Suction extension Vertical pumps Characteristic curves diagram ET Förderhöhe H ( m ) Förderstrom Q ( m /h ) n = min (8-) (8-) (8-6) Hz Förderhöhe H ( m ) Förderstrom Q ( m /h ) n = 9 min - 6- Hz Characteristic curves diagram ETL n = min - ( Hz) Förderstrom Q (m /h) -6 n = 9 min - ( Hz) Förderstrom Q (m /h)
15 8 9 ASV Thermoplastic close coupled sump pumps, type series ETLB Vertical single-stage sump pump, dry running safe ETLB -6 to ETL 8- Characteristic curves diagram ETLB n = min - ( Hz) Immersion depth: 7 mm, 7 mm and 77 mm Materials: PP, PVDF screwless thermoplastic spiral casing Closed impeller, fastened on the motor shaft independent of the rotational direction Stainless steel shaft separated from the fluid by a thick-walled thermoplastic protection tube Shaft lead-through at the mounting plate with lip seals to protect against fluid vapours Radial and axial forces are absorbed by reinforced motor bearings Corrosion protection by a C protection paint coat Förderstrom Q (m /h) Vertical pumps Delivery volume up to m /h up to 6 m PP up to 7 C PVDF up to 9 C DN to DN 8 Three-phase motor,.8 kw to 7. kw, IP Titanium drive shaft and labyrinth seal Suction extension Suction strainer n = 9 min - ( Hz) -6 - Vertical pumps Förderstrom Q (m /h)
16 ASV Thermoplastic close coupled sump pumps, type series ETLB-X ASV Thermoplastic close coupled sump pumps, magnetically coupled, type series ETMB Vertical multi-stage sump pump, dry running capable stage: ETLB -- stage: ETLB -- Immersion depth: 7 mm and 7 mm Materials: PP, PVDF Screwless thermoplastic spiral casing Closed impeller, fastened on the motor shaft independent of the rotational direction Stainless steel shaft separated from the fluid by a thick-walled thermoplastic protection tube Shaft lead-through at the mounting plate with lip seals to protect against fluid vapours Radial and axial forces are absorbed by reinforced motor bearings Corrosion protection by a C protection paint coat Vertical, hermetically sealed single-stage sump pump, power transmission through magnetic coupling, dry running safe ETMB - to ETMB - Immersion depth: 7 mm, 7 mm Materials: PP, PVDF Thermoplastic spiral casing flanged to the immersion tube with stainless steel or PVDF screws Pump compartment hermetically encapsulated by the rear cover Closed impeller with impeller magnet, fastened independent of the rotational direction Pump impeller running in a SiC ceramic sliding bearing Radial and axial forces are absorbed by reinforced motor bearings Corrosion protection by a C protection paint coat Vertical pumps Delivery volume up to m /h up to m PP up to 7 C PVDF up to 9 C DN / DN Three-phase motor,. kw to. kw, IP Drive unit encapsulation to protect against aggressive surrounding air Dry run protection device Suction basket Suction extension Delivery volume up to m /h up to 6 m PP up to 7 C PVDF up to 9 C DN / DN Three-phase motor,.7 kw to. kw, IP Dry run protection device Suction basket Smooth starting unit Vertical pumps Characteristic curves diagram ETLB-X Characteristic curves diagram ETMB ETLB-X -stufig n = 9 min - ( Hz) ETLB-X -stufig -- n = 9 min - ( Hz) n = min - ( Hz) n = 9 min - ( Hz) Förderstrom Q (m /h) Förderstrom Q (m /h) Förderstrom Q (m /h) Förderstrom Q (m /h)
17 Filters and filter stations Filters Filters Number of cartridges: Cartridge length: Filter mesh: Flow quantity: : Nominal connection width: μ...μ up to 6 m /h PP up to C DN DN Thermoplastic filter units are employed in the chemical industry, electroplating and photo industry as well as in many more fields to filter industrial fluids. Special emphasis is placed on the operating safety of all filter units as well as on the operating convenience; for instance, a special design ensures that the individual delivery pump assigned switches off automatically prior to opening the filter cover of units equipped with multiple filter cartridges and that, as such, the filter unit can only be opened when depressurised. The version as a quick release filter permits fast access to the filter elements through special opening mechanisms whenever the filter cartridge has to be replaced. Structure Compact design High safety standard (cover safety) Stainless steel reinforced n parts PP housing EPDM or FPM O-rings Automatic aeration and venting Diaphragm pressure gauge guard and pressure gauges Options ON/OFF switch in the housing incl. motor protection switch Dry running protection to safeguard the pump Bag filter upon request Cartridges As standard, washed cartridge material filter elements made of polypropylene are used in the ASV filter units and stations. This permits filtration of almost all neutral and aggressive fluids. Filter elements of different materials and/or design are also available. These standard filter elements can be used in meshes from. to my. Filters and Accessories
18 Pump accessories Accessories Pump monitors Buffer fluid system Setting range... bar Volume and 7 l Pump motor capacity up to 8. kw Buffer fluid pump. kw Type of protection IP 6 8 m PVC up to 6 C Operating temperature up to C PP up to 8 C PP up to C PVDF up to C Nominal connection width DN... DN Nominal connection width DN ASV pump monitor ASV buffer fluid monitoring system The use of a pump monitor enhances the fault free operation of the pump system; costly operating interruptions are reduced. System protection against the effect of operating pressures prevents damage to the pump and its mechanical seal. Buffer fluid monitoring system For pumps with double-acting mechanical seals Dry run protection device The dry running protection prevents damage to the pump, especially to its mechanical seal. In the event of a pressure drop or interrupted flow, a pressure switch switches off the pump automatically. At very low delivery pressures (e.g. pumping between containers), the corresponding counter-pressure of at least. bar or. bar on the pressure side has to be ensured by a suitable throttle. Mobile buffer fluid system Pump monitors Dry running protection with min. and max. pressure monitoring This pressure switch combination has to be installed to protect the pressure pipework system and its components as well as the pumps. Undue pressure increase in the pipework system is prevented by the pump switching off instantly once the individually permissible and set pressure value is exceeded. Buffer fluid monitoring system To maintain their function, double-acting mechanical seals require a buffer fluid; the buffer pressure must be. - bar above the maximum pressure reached at the mechanical seal of the pump. Damage to the mechanical seal resulting from a lack of buffer fluid or from insufficient buffer pressure is avoided by the ASV buffer pressure monitoring system, causing the pump to automatically switch off when the diaphragm pressure switch is set to the individually required buffer pressure. Filters and Accessories
Thermoplastic Centrifugal Pump Type NMB-S
ASV Stübbe GmbH & Co. KG Hollwieser Straße 5 D-32602 Vlotho Fon +49 (0) 57 33.7 99-0 Fax +49 (0) 57 33.7 99-2 00 www.asv-stuebbe.de contact@asv-stuebbe.de Thermoplastic Centrifugal Pump Type NMB-S Suction
More informationThermoplastic Centrifugal Pump type NMB
ASV Stübbe GmbH & Co. KG Hollwieser Straße 5 D-32602 Vlotho Fon +49 (0) 57 33.7 99-0 Fax +49 (0) 57 33.7 99-2 00 www.asv-stuebbe.de contact@asv-stuebbe.de Thermoplastic Centrifugal Pump type NMB Suction
More informationASV Eccentric Pumps Type F and Type L
ASV Eccentric Pumps Type F and Type L»self-priming - dry running capable«technical data Type F Type L Flow rate Q up to 1,8 m 3 /h up to 5,2 m 3 /h Head H up to 25 m up to 25 m Suction height H max. 5
More informationThermoplastic Centrifugal pump, Type NM
Thermoplastic Centrifugal pump, Type NM acc. to DIN 24256, EN 22858 and ISO 2858 Size: 32-125 up to 150-400 Capacity Q: up to 450 m 3 / h Head H: up to 100 m Operating temperature t: PE up to + 70 C PP
More informationThermoplastic Vertical Sump Pump Type ETL
ASV Stübbe GmbH & Co. KG Hollwieser Straße 5 D-32602 Vlotho Fon +49 (0) 57 33.7 99-0 Fax +49 (0) 57 33.7 99-2 00 www.asv-stuebbe.de contact@asv-stuebbe.de Thermoplastic Vertical Sump Pump Type ETL dry-running
More informationVertical Sump Pump Type ETL
Vertical Sump Pump Type ETL»dry running safe«technical data Flow rate Q up to 220 m 3 /h Head H up to 55 m Submersion depth 500 or 750 mm Suction extension up to 1800 mm Materials limits of use PP up to
More informationVertical Immersion Pump VTP - BBF
MB / General VTP centrifugal pumps in block design (BBF) correspond to the system of two-pipe pumps. Basically these immersion pumps are single-level immersion pumps with vertical axis the main components
More informationCENTRIFUGAL IMMERSION PUMPS
CENTRIFUGAL IMMERSION PUMPS FLUX CENTRIFUGAL IMMERSION PUMPS QUALITY THAT SETS STANDARDS Manufactured at our main plant, these ranges of immersion pumps are the result of extensive product and process
More informationChemical Motor Pump Unit BN
MB / General Pump BN-type motor pump units are normal-priming, singlestage, plastic centrifugal pumps in block design with horizontal axis. Their dimensions and flow rates mainly correspond to DIN/EN.
More informationCentrifugal Immersion Pumps
Centrifugal Immersion Pumps FLUX Centrifugal Immersion Pumps Quality that sets standards. Manufactured at our main plant, these ranges of immersion pumps are the result of extensive product and process
More informationC 200 Modern Construction. Flexible Modular Design. Highest Safety.
Ball Valve Modern Construction. Flexible Modular Design. Highest Safety. The System At A Glance Ergonomic hand lever Position locking Safety Guard Double shaft seal with hand lever Intelligent interface
More informationDiaphragm Valve MV pneumatic - with pneumatically directly controlled actuator
Diaphragm Valve MV 0 - pneumatic - with pneumatically directly controlled actuator Advantage good control characteristics DN 5 - DN 50 equipped as standard with visual position indicator and manual emergency
More informationFILTERTECHNOLOGY. High-performance filters to reliably remove organic and inorganic contaminants from neutral and aggressive liquids.
FILTERTECHNOLOGY High-performance filters to reliably remove organic and inorganic contaminants from neutral and aggressive liquids. Competence in pump and filter technologies Excellent products Whenever
More informationWafer check valve RSK 500
Wafer check valve RSK 00 Advantage corrosion resistant simple installation as a wafer type flange fitting centring of the valve by the housing diameter body with O-ring, no additional flange s required
More informationour contribution for Sealless Magnetic Coupled Multistage Centrifugal Pumps Type HZM / HZMR / HZMB environmental protection
Sealless Magnetic Coupled Multistage Centrifugal Pumps Type HZM / HZMR / HZMB our contribution for environmental protection General DICKOW-pumps of series HZM are sealless multistage horizontal centrifugal
More informationSEMA Side channel pumps PN 25 (40) Glandless because of magnetic drive
SEMA Side channel pumps PN 25 (40) Glandless because of magnetic drive SEMA-S SEMA-L with reference to DIN EN 734 SEMA-Z with reference to DIN EN 734 SEMA-Block in closed-coupled design for extremely low
More informationCentrifugal pumps. made of Polypropylene and PVDF for transferring aggressive media like acids and alkalies
Vertical and horizontal centrifugal pumps www.jesspumpen.com Centrifugal pumps made of Polypropylene and PVDF for transferring aggressive media like acids and alkalies Vertical centrifugal pumps of the
More informationChemical Pumps. With mechanical seal. Non-Metallic Standardized Chemical Pump Type NP. In PP / PE-UHMW / PVDF Dimensions to EN / ISO 2858
Chemical Pumps With mechanical seal Non-Metallic Standardized Chemical Pump Type NP In PP / PE-UHMW / PVDF Dimensions to EN 22 / ISO 2 Applications Type NP standardized chemical pumps are the solution
More informationPressure Relief Valve Overflow Valve Type DHV 715 Type DHV 716 Type DHV 725
ASV Stübbe GmbH & Co. KG Hollwieser Straße D- Vlotho Fon + (). - Fax + (). - www.asv-stuebbe.de contact@asv-stuebbe.de Pressure Relief Valve Overflow Valve Type DHV Type DHV Type DHV High repeating accuracy,
More informationAlloy version available please call for specifications.
Alloy version available please call for specifications. 2 SEAL-LESS MAG-DRIVE PUMP SPECIALISTS From WARRENDER, Ltd. - The Leader in Magnetic Drive Pump Technology: 21st Century Design, Materials and Engineering.
More informationour contribution for Sealless Magnetic Coupled Multistage Centrifugal Pumps Type HZM / HZMR / HZMB environmental protection
Sealless Magnetic Coupled Multistage Centrifugal Pumps Type HZM / HZMR / HZMB our contribution for environmental protection General DICKOW-pumps of series HZM are sealless multistage horizontal centrifugal
More informationDiaphragm Valve MV 310
ASV Stübbe GmbH & Co. KG Hollwieser Straße 5 D-32602 Vlotho Fon +49 (0) 57 33-7 99-0 Fax +49 (0) 57 33-7 99-2 00 www.asv-stuebbe.de contact@asv-stuebbe.de Application chemical plants water treatment Utilisation
More informationSealless Magnetic Coupled Multistage Centrifugal Pumps with Priming Stage Type HZSM / HZSMB / HZSMR / HZSMA / HZSMAR
Sealless Magnetic Coupled Multistage Centrifugal Pumps with Priming Stage Type HZSM / HZSMB / HZSMR / HZSMA / HZSMAR our contribution for environmental protection General DICKOW-pumps of series HZSM are
More informationSide channel pumps PN 16 SOH - SOHB - SOHM. Self-priming centrifugal pumps. Technical description
Side channel pumps PN 16 Self-priming centrifugal pumps SOH - SOHB - SOHM Technical description ATEX certified The SOH side channel pump models are available in a variety of designs. Design base plate
More informationSealless Magnetic Coupled Hot Oil Circulation Pumps acc. to DIN EN / ISO 2858 Type NMWR / NMWB / NMW. our. contribution for
Sealless Magnetic Coupled Hot Oil Circulation Pumps acc. to DIN EN 22858 / ISO 2858 Type NMWR / NMWB / NMW our contribution for environmental protection General DICKOW pumps of series NMWR / NMWB / NMW
More informationUTN-L / UTN-BL I frame
UTN-L / UTN-BL I frame Lined Magnetic Drive Process Centrifugal Pumps UTN-BL PFA CLOSE COUPLED EXECUTION Plastic and Fluoroplastic Lined Magnetic drive Horizontal - Single Stage - Process Centrifugal pumps
More informationChemical Pumps. With mechanical seal. Non-Metallic Close-Coupled Chemical Pump Type NP-B
Chemical Pumps With mechanical seal Non-Metallic Close-Coupled Chemical Pump Type NP-B In PP / PE-UHMW / PVDF Casing dimensions to EN 2288 / ISO 288 Applications Type NP-B chemical pumps are the solution
More informationRichter Sealless Chemical Magnetic Drive Pumps
Richter Sealless Chemical Magnetic Drive Pumps MDK, MDK-B SAFEGLIDE PLUS dry-run option Corrosion-resistant through PFA Unfilled virgin lining Richter sealless chemical magnetic drive pumps Fields of application
More informationour contribution for environmental protection Sealless magnetic coupled centrifugal pumps acc. to EN Type NML / NMB
Sealless magnetic coupled centrifugal pumps acc. to EN 22858 our contribution for environmental protection Type NML / NMB General Magnetic coupled DICKOW-pumps of the series NM are sealless pumps. The
More informationSCHMITT. product information. Kreiselpumpen. U Pump Series. normal priming, centrifugal pumps with a single mechanical seal.
SCHMITT Kreiselpumpen chemical resistant pumps for corrosive and highly pure media product information U Pump Series normal priming, centrifugal pumps with a single mechanical seal materials: PVDF Description
More informationTapflo - your reliable pumpchoice
Tapflo - your reliable pumpchoice Tapflo - your reliable pumpchoice With experience from industrial fluid handling and pump manufacture since 1970, we know what you as a customer require from an industrial
More informationNJK Series ISO Standard End-Suction Centrifugal Pumps
ISO Standard End-Suction Centrifugal Pumps PVDF CFRPVDF ISO 8 ISO 5199 EN 28 Armour Type Corrosion Resistant Chemical Pumps ISO Standard End-Suction Centrifugal Pumps PVDF CFRPVDF ISO 8 ISO 5199 EN 28
More informationMaterials: Parts of the pump in contact with the liquid are manufactured from the following standard
Plastic Centrifugal Pump For Chemical Process DIN EN 22858 (ISO 2858)Standard DESCRIPTION pumps are manufactured to DIN EN 22858 (ISO 2858) standards in respect of design, performance and dimensions. They
More informationMODEL INFORMATION CANNED MOTOR PUMP TYPE CAM HERMETIC
MODEL INFORMATION CANNED MOTOR PUMP TYPE CAM HERMETIC ... 3... 4 3000 rpm 50 Hz / 3600 rpm 60 Hz... 4... 5... 7 Modular pump / motor systems... 7 Materials...........................................................
More informationChemical Magnetic Pumps with PTFE/PFA lining ATEX- and FDA compliant
Chemical Magnetic Pumps with PTFE/PFA lining ATEX- and FDA compliant Highly corrosionresistant pumps for absolute aggressive liquids and dangerous liquids. Energy-efficient pumps and chemical pumps Sustainable
More informationA measured step forward
A measured step forward Centrifugal pumps Dosing Conveying Control Liquids Gases Systems Chemical centrifugal pumps For industrial piping construction Tradition creates innovation Many decades of experience
More informationRotary Blowers Omega Series Air delivery from 0.5 to 160 m³/min Pressure up to 1000 mbar, vacuum to -500 mbar
www.kaeser.com Rotary Blowers Omega Series Air delivery from 0.5 to 160 m³/min Pressure up to 1000, vacuum to -500 KAESER Rotary Blowers Efficient and Durable Renowned throughout the world for their efficiency
More informationPressure relief valve
Pressure relief valve Operating manual Series DHV 712 Version BA-2015.10.20 EN Print-No. 300 510 TR MA DE Rev001 ASV Stübbe GmbH & Co. KG Hollwieser Straße 5 32602 Vlotho Germany Phone: +49 (0) 5733-799-0
More informationTECHNICAL DESCRIPTION
TECHNICAL DESCRIPTION STN-SP are self-priming magnetic driven centrifugal pumps in close-coupled execution. Ideal for safe installation priming from the top of vessels and/or tanks for transferring acids,
More informationMagnetic drive. Materials. Your expert in all materials PFA PTFE PVDF PE PP
Magnetic drive plastic pump TypE FNPM Materials PFA PTFE PVDF PE PP RHEINHÜTTE PUMPS Your expert in all materials FNPM: For the toughest applications Plastic-lined magnetic drive pumps offering a huge
More informationT H E C O M P A N Y. TURNOVER 2005 : 9,500,000 EUROS ANNUAL OUTPUT: 3,700 pumps Total area : 10,000 m 2 Manufacturing area: 4,000 m 2
T H E C O M P A N Y TURNOVER 2005 : 9,500,000 EUROS ANNUAL OUTPUT: 3,700 pumps Total area : 10,000 m 2 Manufacturing area: 4,000 m 2 SOMEFLU is specialized for more than 40 years in the design and the
More informationAngle Seat Valve SV 300
Angle Seat Valve SV 00 Advantage corrosion resistant maintenance-free good control characteristics metal-free Application chemical plants industrial plants water treatment Utilisation for shut-off and
More informationBall Valve C 110. PVC-U PP PVDF - wafer flange socket end DIN-flange. Ball. Advantages. Ball seat. Application. Sealings. Utilisation.
ASV Stübbe GmbH & Co. KG Hollwieser Straße 5 D-32602 Vlotho Fon +49 (0) 57 33-7 99-0 Fax +49 (0) 57 33-7 99-2 00 www.asv-stuebbe.de contact@asv-stuebbe.de Ball Valve C 110 PVC-U PP PVDF - wafer flange
More informationA measured step forward
A measured step forward Centrifugal pumps Dosing Conveying Control Liquids Gases Systems Chemical centrifugal pumps For industrial piping construction Tradition creates innovation Many decades of experience
More informationARBO. Pompen en Filters b.v.
ARBO Pompen en Filters b.v. Product group 1.1 Chemical pumps SealPro Applications For all transport or circulation duties of corrosive liquids, even high viscosity, with maximum efficiency. This series
More informationVolute Casing Centrifugal Pumps in High Temperature Design with Magnetic Drive. Series CNH-ML
Volute Casing Centrifugal Pumps in High Temperature Design with Magnetic Drive Series CNH-ML Usage For pumping toxic, volatile, explosive or other fluids harmful to the environment which call for service
More informationVolute Casing Centrifugal Pumps according to EN 22858, ISO 2858 with Magnetic Drive. Series CNH-M
Volute Casing Centrifugal Pumps according to EN 22858, ISO 2858 with Magnetic Drive Series CNH-M Usage For pumping toxic, volatile, explosive or other fluids harmful to the environment which call for service
More informationMultistage Pumps MP, MPA, MPB, MPV SIZES DN 40 - DN 125. Jansen Pompentechniek T: +31(0) E:
Multistage Pumps MP, MPA, MPB, MPV SIZES DN 40 - DN 125 Technical Data Performance range: m Capacities up to 340m 3 /h (1500USgpm) m Head up to 500m (1640feet) m Max. speed up to 3600rpm Multistage pumps
More informationStrainer SF 305. Sealing FPM EPDM
Strainer SF 05 dvantage corrosion resistant transparent version (transparent PVC) for visual control of the degree of soiling easy to maintain pplication chemical plants industrial plants water treatment
More informationSide channel pumps PN 16 SOH - SOHB. Self-priming centrifugal pumps. Technical description
Side channel pumps PN 16 Self-priming centrifugal pumps SOH - SOHB Technical description Operating data Design Industries Media pumped: Nominal diameter: 1-1 1 /2 Flow rate: 0.3-7.5 m 3 /h Pump head: 5-155
More informationLiquid ring vacuum pumps with magnetic coupling
Liquid ring vacuum pumps with magnetic coupling LPH 75320, LPH 75330, LPH 75340 Pressure range: Suction volume flow: 33 to 1013 mbar 485 to 1615 m³/h CONSTRUCTION TYPE Sterling SIHI liquid ring vacuum
More informationVolute Casing Centrifugal Pumps in In-line Design with Magnetic Drive. Series CNI-M
Volute Casing Centrifugal Pumps in In-line Design with Magnetic Drive Series CNI-M Usage For pumping toxic, volatile, explosive or other fluids harmful to the environment which call for service of hermetically
More informationChemical pump with plastic liner in close-coupled design
Type series booklet 793.5/40 G3 TyachemBloc Chemical pump with plastic liner in closecoupled design Fields of Application TyachemBloc pumps are used for handling highly aggressive, corrosive and abrasive
More informationNon-Metallic Seal-less Mag-Drive Pumps
Non-Metallic Seal-less Mag-Drive Pumps Seal-less Mag-Drive Pump Specialists SOLID PP & PVDF Thermoplastic Mag-Drive Pumps Centrifugal, Turbine & Self-Priming From WARRENDER: Advanced design, materials
More informationIWAKI MAGNETIC DRIVE PUMPS MDM. Patent JAPAN / U.S.A. / TAIWAN / EU / CHINA
IWAKI MAGNETIC DRIVE PUMPS Patent JAPAN / U.S.A. / TAIWAN / EU / CHINA Magnetic drive process pump resistant to dry run damage The Series of Magnetic drive process pumps have wetted parts made of fluororesin.
More informationA measured step forward. CENTRAN TM - Centrifugal Transfer Pumps
A measured step forward CENTRAN TM - Centrifugal Transfer Pumps TM Lutz-JESCO Centrifugal Pumps Products you can rely on Lutz-JESCO s CENTRAN TM - Magnetic Drive Centrifugal - pumps are the ideal complement
More information1 Full Year Factory Warranty SIKO PUMP
Catalogue No. SIKO-CQB-003 B A CATALOUGE FOR CQ MAG- DRIV E CEN TRIFUGAL PUMP 1 Full Year Factory Warranty Food & Beverage Mining Paints & Dyes Petrochemical Pharmaceutical Pulp & Paper Power & Energy
More informationPressure relief valve DHV 712-R set range: 0,3-10,0 bar
Pressure relief valve DHV 7R set range: 0,3 0,0 bar Benefits pressure setting possible at any time, also during operation optimum monitoring valves high reproducibility of the set pressure high level of
More informationBall valve C 10 valve ball completely moulded in place, extremely low clearance volume, high k v value
Ball valve C 0 valve ball completely moulded in place, extremely low clearance volume, high k v value Advantage maximum safety due to valve ball completely moulded in place - ball and cannot be flushed
More informationGENERAL INFORMATION THE BUSINESS STRATEGY IS CONCENTRATED ON: THE PRODUCT RANGE CONTAINS PUMPS FOR:
GENERAL INFORMATION SIVAG Pumpen Ges.m.b.H. is primarily concerned with manufacturing and distributing of pumps for many years. Basically the products are used for industrial purposes. Since 1989 the head
More informationIWAKI MAGNETIC DRIVE PUMPS MDM. Patent JAPAN / U.S.A. / TAIWAN / EU / CHINA
IWAKI MAGNETIC DRIVE PUMPS Patent JAPAN / U.S.A. / TAIWAN / EU / CHINA Magnetic drive process pump resistant to dry run damage The Series of Magnetic drive process pumps have wetted parts made of fluororesin.
More informationNS Series Non Metallic End-Suction Centrifugal Pumps
Non Metallic End-Suction Centrifugal Pumps GFRPP CFRPVDF MECHANICAL SEAL GLAND PACKING Corrosion Resistant Chemical Pumps Non Metallic End-Suction Centrifugal Pumps GFRPP CFRPVDF MECHANICAL SEAL GLAND
More informationScrew Pumps Series EMTEC HIGH-TECH FOR EMULSION. 20 DQ axial branch with pipe thread. 140 D8.6 radial branch with SAE flange
Screw Pumps 20 DQ axial branch with pipe thread HIGH-TECH FOR EMULSION 140 D8.6 radial branch with SAE flange Application For handling good, medium or mal-lubricating, abrasive fluids in cooling lubricant
More informationHEAVY DUTY HORIZONTAL, SEALLESS CENTRIFUGAL PUMP WITH PERMANENT MAGNET DRIVE SYSTEM, NO MECHANICAL SEAL ISO DIN 24256
HEAVY DUTY HORIZONTAL, SEALLESS CENTRIFUGAL PUMP WITH PERMANENT MAGNET DRIVE SYSTEM, NO MECHANICAL SEAL ISO 2858 - DIN 24256 CN MAG-M Series The separation of liquid chamber/atmosphere by means of an isolation
More informationNorm-Centrifugal Pumps PN 10
Norm-Centrifugal Pumps PN 10 Pump dimensions acc. to DIN EN 733 with additional sizes Technical requirements acc. to DIN ISO 9908 Application For pumping pure water, industrial water, sea water, condensate,
More informationCENTRIFUGAL PUMP TYPE SLM NV TO DIN EN AND DIN EN ISO SEALLESS WITH MAGNET DRIVE
Production range pumps: Pumps with magnet drive Centrifugal pumps according to DIN EN 22858 Centrifugal pumps according to ANSI B73.3 Centrifugal pumps for refinery and petrochemical applications according
More informationPKX MA/A. Characteristics
PKX MA/A The PKX is a PTFE diaphragm type Solenoid Metering Pump that distinguishes itself for its simplicity of use. It has proven reliability and quality and due to it compact design and versatility
More informationPrimus 221 offers optimum dosing accuracy and operating convenience. The dosing flow variation is only ± 1,5 %
Product Information Primus 221 The versatile diaphragm dosing pump Primus 221 offers optimum dosing accuracy and operating convenience The dosing flow variation is only ± 1,5 % Primus 221 doses with a
More informationGRUNDFOS PRODUCT GUIDE DMH. Dosing pumps
GRUNDFOS PRODUCT GUIDE Dosing pumps Contents Features and benefits 3 Performance range 4 Pump selection options 36 Pumped liquids List of pumped liquids 39 Identification Type key 7 Functions Functional
More informationSealless Centrifugal Pump Type SLM NV
Sealless Centrifugal Pump Type SLM NV SLM NV A revolution in pump construction This new pump manufactured to DIN EN 22858 is much more than just another modification to a well established range of centrifugal
More informationProduct group D. Seepex Group D
Product group D. Seepex Group D Progressive cavity Pumps D Dosing pumps The 6 ranges of dosing pumps can be used in virtually all industries for the metering and dosing of precise quantities. They are
More informationVolute Casing Pumps LSN. according to iso 2828 / iso Jansen Pompentechniek T: +31(0) E:
Volute Casing Pumps LSN according to iso 2828 / iso 5199 Technical Data Performance Range: m Capacity up to 500m 3 /h (1980USgpm) m Head up to 150m (492feet) m Speed 2950/3550rpm Pump Sizes: m DN 25 up
More information- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 BEARINGS 302 MECHANICAL SEAL 303 FITTINGS 304
CONTENTS 1 Page - SPECIFICATIONS 200 PERFORMANCE RANGE and SELECTION CHART 201 TYPE KEY and CURVES SPECIFICATIONS 202 PERFORMANCE CURVES 32-250/7.56 203 PERFORMANCE CURVES 32-250/9.26 203 PERFORMANCE CURVES
More informationVolute Casing Centrifugal Pumps of the Block-Type Construction with Magnetic Coupling
Volute Casing Centrifugal Pumps of the BlockType Construction with Magnetic Coupling ALLMAG Series CMA ATEX 0 a Application For handling toxic, volatile, explosive or other fluids harmful to the environment
More informationMDM. Magnetic drive pumps Magnetic drive process pump resistant to dry run damage. Magnetic drive pumps. series
MDM series Magnetic drive pumps Magnetic drive process pump resistant to dry run damage Magnetic drive pumps The MDM Series of Magnetic drive process pumps have wetted parts made of fluororesin. Patent
More informationDiaphragm Valve MV 309
Diaphragm Valve MV 309 Benefits compact designed pneumtically operated valve standard with visual position indicator common installation length air connections acc. to NAMUR Application chemical and industrial
More informationDiaphragm valve MV 309
Diaphragm valve MV 309 Nominal size DN 15 32 Nominal size 1/2 1 1/4 Pressure PN 6 bar Features pneumatic diaphragm valve DN 15 32 compact piston drive for medium pressure up to 6 bar (PTFE diaphragms)
More informationWebster S-Series Vertical Seal-Less Immersible Pumps. Rugged, Non-metallic Chemical Duty Pumps Against a Closed Valve
Webster S-Series Vertical Seal-Less Immersible Pumps Rugged, Non-metallic Chemical Duty Pumps Against a Closed Valve Reduce Unscheduled Downtime The S-Series vertical pump is the pump to choose when unscheduled
More informationPN 16/PN 25 Volute Centrifugal-Pumps for Heat Transfer Media Thermal Oil up to 400 C Hot Water up to 207 C
PN 16/PN 25 Volute Centrifugal-s for Heat Transfer Media Thermal Oil up to 00 C Hot Water up to 7 C Series NTWH/CTWH Series NBWH/CBWH Series NIWH/CIWH Application For circulating heat transfer media such
More informationProduct information. T Pump Series Submersible pumps Materials: PP or PVDF without seals dry-run-safe
Product information Submersible pumps Materials: PP or PVDF without seals dry-run-safe Description Submersible pumps without seals Application: Field of application: Materials: Immersion depth: Max. output
More informationSP SERIES SELF-PRIMING MAG DRIVE
SP SERIES SELF-PRIMING MAG DRIVE spend less time waiting. and more time pumping. year Big on power yet short on energy consumption, the SP Series from Finish Thompson is one of the most versatile and economical
More informationSCHMITT. product information. Kreiselpumpen. T Pump Series. submersible pumps. materials: PP or PVDF
SCHMITT Kreiselpumpen chemical resistant pumps for corrosive and highly pure media product information T Pump Series submersible pumps materials: PP or PVDF Description of the T Pump Series 2 - Submersible
More informationAn IDEX Water & Wastewater Business. pulsafeeder.com. Non-Metallic External Gear Pump
An IDEX Water & Wastewater Business pulsafeeder.com Non-Metallic External Gear Pump Pulsafeeder Expertise Since 1936, Pulsafeeder has been the global leader in fluid handling technology and innovation
More information- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 BEARINGS 302 MECHANICAL SEAL 303 FITTINGS 304
CONTENTS Page - SPECIFICATIONS 200 PERFORMANCE RANGE 201 SELECTION CHART 202 TYPE KEY 203 CURVE SPECIFICATIONS 204 PERFORMANCE CURVE 32-250/5.5 205 PERFORMANCE CURVE 32-250/7.5 205 PERFORMANCE CURVE 32-250/9.2
More informationkythe Compact Pump LKH-110 and LKH-120/P Multi-Stage Centrifugal Pump
. kythe Compact Pump LKH-110 and LKH-120/P Multi-Stage Centrifugal Pump Application LKH-110 and -120/P are highly efficient and economical multistage centrifugal pumps, which meet the requirements of sanitary
More informationDLX MA/MB. Characteristics
DLX MA/MB The DLX range of pumps is a proven PTFE diaphragm type Solenoid Metering Pump that distinguishes itself with having a wide range of control options. Since its launch the DLX pump range has given
More informationIWAKI MAGNETIC DRIVE PUMPS MDM. Patent JAPAN / U.S.A. / TAIWAN / EU / CHINA
IWAKI MAGNETIC DRIVE PUMPS Patent JAPAN / U.S.A. / TAIWAN / EU / CHINA Magnetic drive process pump resistant to dry run damage The Series of Magnetic drive process pumps have wetted parts made of fluororesin.
More informationSealless magnetic coupled centrifugal pump Type NMR Design with heavy duty oil lubricated bearing bracket. our. contribution for
Sealless magnetic coupled centrifugal pump Type NMR Design with heavy duty oil lubricated bearing bracket our contribution for environmental protection GENERAL DICKOW-pumps of series NMR are sealless centrifugal
More informationContents. Identification
Contents Identification Type key Product data Introduction Applications Features and benefits Performance range pole pole Construction Sectional drawing Construction features Test pressure Operating conditions
More informationIWAKI MAGNETIC DRIVE PUMPS MDM. Patent & Pat.Pend. JAPAN / U.S.A. / EU / CHINA / TAIWAN
IWAKI MAGNETIC DRIVE PUMPS Patent & Pat.Pend. JAPAN / U.S.A. / EU / CHINA / TAIWAN Magnetic drive process pump resistant to dry run damage The Series of Magnetic drive process pumps have wetted parts made
More informationMETAL PUMPS GVSO. Vertical Chemical Centrifugal Pumps One Concept for Maximum Flexibility.
METAL PUMPS GVSO Vertical Chemical Centrifugal Pumps One Concept for Maximum Flexibility. GVSO ALWAYS THE RIGHT CHOICE If you want to solve demanding pumping tasks in the industry efficiently, permanently
More informationPropeller Pump. Performance data Delivery flow Q up to m³/h Delivery head H up to 1,5 m Liquid temperature t up to 100 C Delivery branch
Propeller Pump Utilization and main fields of application For pumping sewage containing nitrate or activated sludge from the nitrification basin to the denitrification basin (recirculation). Further for
More informationAutomatic metal-edge filter AF 73 G/AF 93 G
Automatic metal-edge filter AF 73 G/AF 93 G with radial scraper cleaning Connection size G2, screw-in flange DN 50 and DN 65 1 Features MAHLE automatic metal-edge filters are suitable for all applications
More information- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 BEARINGS 302 MECHANICAL SEAL 303 FITTINGS 304
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 20 SELECTION CHART TABLE 202 TYPE KEY AND CURVE SPECIFICATIONS 203 PERFORMANCE CURVE 32-250/5.5 205 PERFORMANCE CURVE 32-250/7.5 205 PERFORMANCE CURVE
More informationMain material CFRETFE IWAKI SELF-PRIMING MAGNETIC DRIVE PUMPS SMX-F PATENT JAPAN / U.S.A. / EU / CHINA / TAIWAN
Main material CFRETFE IWAKI SELF-PRIMING MAGNETIC DRIVE PUMPS PATENT JAPAN / U.S.A. / EU / CHINA / TAIWAN Chemically resistant self-priming magnetic drive pumps which can tolerate abnormal operation The
More informationEVM. VERTICAL MULTISTAGE ELECTRIC PUMPS in cast iron, AISI 304, AISI 316. Your Life, our Quality. Worldwide. 36 Commercial
Vertical multistage centrifugal electric pumps available in various versions: cast iron (G), AISI 304 stainless steel (), AISI 316 stainless steel (L). APPLICATIONS Civil, industrial, agricultural and
More informationVolute Casing Centrifugal Pumps PN 16 for heat-transfer liquids Heat-transfer oil up to 350 C Hot water up to183 C
Volute Casing Centrifugal Pumps PN 16 for heat-transfer liquids Heat-transfer oil up to 350 C Hot water up to183 C Series CMIT in inline design Series CMAT with axial inlet ATEX 0 a Series CMAT Series
More informationTI TOWN CHEMICAL PUMPS
TMI Series (Industrial-process thermoplastic resin centrifugal pumps) Exceptional mechanical strength provided by the ductile cast iron (FCD 450) pump casing and non metallic back casing cover TI TOWN
More informationAPIFLO-M series Series
APIFLO-M series Series Horizontal Multistage Pump According to API610 Capacity: up to 650m 3 /h (50Hz) up to 780 m 3 /h (60Hz) Head: up to 1200m (50Hz) up to 1728 m (60Hz) Pressure: APIFLO-M: up to 25
More informationSE M.C.N.51D
GRUNDFOS DATA BOOKLET SE1.110.200.200.4.52M.C.N.51D Grundfos pump 98179813 Thank you for your interest in our products. Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/seslfam/98179813/se1-110-200-200-4-52m-c-n-51d.html
More information