SSR HORSEPOWER PARTS LIST RECOMMENDED SPARES

Transcription

1 SSR HORSEPOWER PARTS LIST RECOMMENDED SPARES This manual contains important safety information and must be made available to personnel who operate and maintain this machine. C.C.N. : REV : E DATE : JUNE 007

2 WARRANTY AIR COMPRESSOR GROUP BONDED WARRANTY & REGISTERED START UP Warranty The Company warrants that the equipment manufactud by it and delived heunder will be fe of defects in material and workmanship for a period of twelve months from the date of placing the Equipment in operation or eighteen months from the date of shipment from Davidson, NC, whichever shall first occur. The Purchaser shall be obligated to promptly port any failu to conform to this warranty, in writing to the Company in said period, wheupon the Company shall, at its option, corct such nonconformity, by suitable pair to such equipment or, furnish a placement part F.O.B. point of shipment, provided the Purchaser has stod, installed maintained and operated such Equipment in accordance with good industry practices and has complied with specific commendations of the Company. Accessories or equipment furnished by the Company, but manufactud by others, shall carry whatever warranty the manufacturs have conveyed to the Company and which can be passed on to the Purchaser. The Company shall not be liable for any pairs, placements, or adjustments to the Equipment or any costs of labor performed by the Purchaser or others without Company s prior written approval. The effects of corrosion, erosion and normal wear and tear a specifically excluded. Performance warranties a limited to those specifically stated within the Company s proposal. Unless sponsibility for meeting such performance warranties a limited to specified tests, the Company s obligation shall be to corct in the manner and for the period of time provided above. THE COMPANY MAKES NO OTHER WARRANTY OR REPRESENTATION OF ANY KIND WHATSOEVER, EXPRESSED OR IMPLIED, EXCEPT THAT OF TITLE, AND ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED. Corction by the Company of nonconformities whether patent or latent, in the manner and for the period of time provided above, shall constitute fulfillment of all liabilities of the Company for such nonconformities whether based on contract, warranty negligence, indemnity, strict liability or otherwise with spect to or arising out of such Equipment. The purchaser shall not operate Equipment which is consided to be defective, without first notifying the Company in writing of its intention to do so. Any such Equipment will be at Purchaser s sole risk and liability. Limitation or Liability The medies of the Purchaser set forth hein a exclusive, and the total liability of the Company with spect to this contract or the Equipment and services furnished heunder, in connection with the performance or bach theof, or from the manufactu, sale, delivery, installation, pair or technical diction coved by or furnished under this contract, whether passed on contract, warranty negligence, indemnity, strict liability or otherwise, shall not exceed the purchase price of the unit of Equipment upon which such liability is based. The Company and its suppliers shall in no event be liable to the Purchaser, any successors in intest or any beneficiary or assignee of this contract for any consequential, incidental, indict, special or punittive damages arising out of this contract or any bach theof, or any defect in, or failu of, or malfunction of the Equipment heunder, whether based upon loss of use, lost profits or venue, intest, lost goodwill, work stoppage, impairment of other goods, loss by ason of shutdown or nonoperation, incased expenses of operation, cost of purchase of placement power or claims of Purchaser or customers of Purchaser for service interruption whether or not such loss or damage is based on contract, warranty, negligence, indemnity, strict liability or otherwise.

3 CONTENTS CONTENTS SAFETY & WARNINGS 3 INTRODUCTION 4 INTELLISYS CONTROLLER AND STARTER BOX ASSEMBLY 5 STARTER ASSEMBLY D80-D80 STAR DELTA 6 STARTER ASSEMBLY D0-80 STAR DELTA 7 STARTER ASSEMBLY D STAR DELTA 8 STARTER ASSEMBLY D300-0 STAR DELTA 9 MAJOR COMPONENTS 0/300 HP MAJOR COMPONENTS EP300 HP 3 MAJOR COMPONENTS 300E HP - WITH OIL PUMP 4 MAJOR COMPONENTS 300E HP - NO OIL PUMP MAJOR COMPONENTS HP - WITH OIL PUMP MAJOR COMPONENTS HP - NO OIL PUMP MAJOR COMPONENTS HP EXTENDED PKG 8 DRIVE TRAIN 0/300 HP 9 DRIVE TRAIN 300E-450 HP 0 AIREND PIPING 0/300 HP AIREND PIPING 300E HP - WITH OIL PUMP AIREND PIPING 300E HP - NO OIL PUMP 3 AIREND PIPING HP - WITH OIL PUMP 4 AIREND PIPING HP - NO OIL PUMP 6'' INLET VALVE WITH AIR FILTER - 0/300 HP 7 8'' INLET VALVE WITH AIR FILTER - 300E & HP 9 8'' INLET VALVE STEPPER MOTOR 300E & HP 30 SEPARATOR TANK 0/300 HP 3 SEPARATOR TANK HP 34 AIRCOOLED COOLER 0/300 HP 37 AIR DISCH. ASSEMBLY 0/300 HP - NO AFTERCOOLER (SINGLE STAGE) 38 AIR DISCH. ASSEMBLY 0/300 HP - NO AFTERCOOLER (TWO STAGE) 39 AIRCOOLED COOLER HP 4 WATERCOOLED ASSEMBLY 0/300 HP - 90 WATER (SERIES FLOW) NO CONTROL VALVE 44 WATERCOOLED ASSEMBLY 0/300 HP - 90 WATER (SERIES FLOW) WITH CONTROL VALVE 45 WATERCOOLED ASSEMBLY 0/300 HP - NO AFTERCOOLER 46 WATERCOOLED ASSEMBLY 0/300 HP - (PARALLEL) WITH CONTROL VALVE 47 WATERCOOLED ASSEMBLY 0/300 HP - (PARALLEL) NO CONTROL VALVE 48 WATERCOOLED ASSEMBLY HP - 90 WATER (SERIES FLOW) 5 WATERCOOLED ASSEMBLY HP - 90 WATER (SE- RIES FLOW) WITH CONTROL VALVE 5 WATERCOOLED ASSEMBLY HP - NO AFTERCOOLER 53 WATERCOOLED ASSEMBLY HP - WATER (PARALLEL FLOW) 56 WATERCOOLED ASSEMBLY HP - WATER (PARALLEL FLOW) WITH CONTROL VALVE 57 WATERCOOLED ASSEMBLY HP - WATER (PARALLEL FLOW) NO AFTERCOOLER 58 AIRCOOLED INTAKE 0/300 HP 59 AIRCOOLED INTAKE HP 60 WATERCOOLED INTAKE HP 6 WATERCOOLED INTAKE HP 6 ENCLOSURE 0/300 HP 65 ENCLOSURE 350/450 HP 68 EXTENDED PACKAGE ENCLOSURE 0/300 HP (SINGLE STAGE) 7 EXTENDED PACKAGE ENCLOSURE 0/300 HP (TWO STAGE) 73 EXTENDED PACKAGE ENCLOSURE 350/450 HP 76 OUTDOOR MODIFICATION ENCLOSURE 0/300 HP 78 OUTDOOR MODIFICATION ENCLOSURE HP 8 O-RINGS 8 RECOMMENDED SPARE PARTS LIST ROTARY SCREW AIR COMPRESSOR This unit was purchased from: Ingersoll Rand Company serves the right to make changes or add improvements without notice and without incurring any obligation to make such changes or add such improvements to products sold pviously. Model: No: Customer Order No: Ingersoll Rand Co. Order No: For ady fence: Record the serial number and model number of your unit he. Serial Number:

4 SAFETY AND WARNINGS WARNING The is a high discharge air temperatu shutdown function built into each compssor. lt is factory pset at 09 C (8 F).This function should be checked at gular intervals for proper operation, once a month is commended. Refer to maintenance section. Failu to adhe to these commendations can sult in mechanical failu, property damage and serious injury or death. All air and water inlet, and air and water discharge pipework to and from the inlet and discharge port connections must take into account vibration, pulsations, temperatu, maximum pssu applied, corrosion and chemical sistance. In addition, it should be noted that lubricated compssors will discharge some oil into the air stam; thefo, compatibility between discharge piping, system accessories and softwa must be assud. For the fogoing asons, the use of plastic piping, solded copper fittings and rubber hose as discharge piping is not commended. In addition, flexible joints and/or flex lines can only be consided for such purposes if their specifications fit the operating parameters of the system. It is the sponsibility of the installer and owner to provide the appropriate service pipework to and from the machine. WARNING STATEMENT CONCERNING THE USE OF THIS EQUIPMENT FOR BREATHING AIR AND/OR AQUA LUNG SERVICE If the model number on this air compssor contains the letters BAP, the compssor is suitable for use in bathing air services. In the absence of such a designation, the compssor is NOT consided as capable of producing air of bathing quality. For a compssor to be capable of use in bathing air services it must be fitted with additional specialized equipment to properly filter and/or purify the air to meet all applicable federal, state and local laws, rules, gulations and codes, such as, but not limited to, OSHA 9 CFR 90.34, Compssed Gas Association Commodity Specification G-7, -966, Grade D Bathing Air and/or Canadian Standards Association. Should the Purchaser and/or User fail to add such specialized equipment and proceeds to use the compssor for bathing air service, the Purchaser/User assumes all liability sulting thefrom without any sponsibility or liability being assumed by Ingersoll- Rand Company. The Purchaser is urged to include the above provision in any agement for any sale of this compssor.

5 INTRODUCTION 3 PARTS LIST INTRODUCTION GENERAL This manual, which contains an illustrated parts bakdown, has been ppad as an aid in identifying and ordering parts in the SSR compssor. All of the compssor parts listed in the parts bakdown a manufactud with the same pcision as the original equipment. Ingersoll Rand Company service facilities and parts a available worldwide. The a Ingersoll Rand company Branch Offices and authorized distributors located in the principle cities of the United States. In Canada, our customers a serviced by the Canadian Ingersoll Rand Company, Limited. The a also Ingersoll Rand Company subsidiaries and authorized distributors located in the principle cities throughout the world. DESCRIPTION The illustrated parts bakdown illustrates the various assemblies, sub-assemblies and detailed parts which make up this particular SSR compssor. A series of illustrations show each part clearly and in it s corct location lative to the other parts in the illustration. Each part on an illustration is fenced with a number. The number, description and quantity needed per assembly is listed in numerical order on the following pages. OPTIONAL EQUIPMENT Several optional accessories/items a available for convenience or special application. These accessories have been selected as being particularly suitable for use on the SSR compssor. For complete details on Optional Equipment, contact your Sales Repsentative. HOW TO USE THIS PARTS MANUAL. Turn to the Parts Section to locate the desid illustrations.. Locate the part on the illustrationby visual identification and the fence number. 3. Find the fenced number onthe Tabulated page, along with the Part Number and Description. HOW TO ORDER PARTS In order that all avoidable errors be eliminated when ordering parts, please specify the following:. The model number of the unit as shown on the Compssor Data Plate.. The serial number of the unit as shown on the Compssor Data Plate. 3. The form number of this manual (shown on front cover). 4. The fence number, part number, description and quantity needed exactly as listed. 5. The motor data code shown on the motor data plate. *0000 U MANUFACTURED IN U.S. YEAR OF MANUFACTURE JULIAN DATE OF MANUFACTURE *EORFDEPENDINGONSIZEOFUNIT

6 4 INTELLISYS CONTROLLER AND STARTER BOX ASSEMBLY REV ASSY. INTELLISYS. CONTROLLER A GASKET B BOLT,. X.500 TAPTITE C WASHER, STAR LIGHT, AMBER COMPLETE A BULB, 4V SWITCH, EMERGENCY STOP TRANSDUCER, 0- PSIG 4A CABLE, TRANSDUCER TRANSDUCER, 0- PSIG (TWO STAGE) 5A TRANSDUCER, 0-5 PSIG (SINGLE STAGE) 5B CABLE, TRANSDUCER (TWO STAGE) 5C CABLE, TRANSDUCER (SINGLE STAGE) BULKHEAD CONNECTOR (FOR MTG TRANSDUCER) (TWO STAGE) 6A BULKHEAD CONNECTOR (FOR MTG TRANSDUCER) (SINGLE STAGE) 6B WASHER, STAR (TWO STAGE) 6C WASHER, STAR (SINGLE STAGE) X NYLON, TUBE X TUBING, FLEXIBLE TEFLON LOW AMBIENT CABLE, STEPPER MOTOR PLUG, POSITION PLUG, 3 POSITION PLUG, 0 POSITION PLUG, 6 POSITION X TUBING, NYLON NEMA AND X TUBING, FLEXIBLE TEFLON LOW AMBIENT X TUBING, NYLON NEMA AND X TUBING, FLEXIBLE TEFLON LOW AMBIENT ELBOW, 90 NEMA AND ELBOW, 90 NEMA AND TUBING, NYLON NEMA AND X TUBING, FLEXIBLE TEFLON LOW AMBIENT BRACKET, TRANSDUCER, WHITE NOTES: BRACKET, TRANSDUCER, BEIGE. X ORDER PER NUMBER OR INCHES REQUIRED. STANDARD FASTENINGS SUCH AS NUTS, BOLTS AND SCREWS ARE LISTED AS SUB-ITEMS (EXAMPLE:A) 3. ALL CONTROL TUBING FOR LOW AMBIENT UNITS TO BE TEFLON FLEXIBLE TUBING, STAINLESS STEEL TUBING OR METAL FLEX. ALL CONTROL TUBING TO BE HEAT TRACED

7 STARTER ASSEMBLY D80-D80 STAR DELTA REV A STARTER BACK PANEL CONTACTOR, 80 AMP W/I NO & NC AUX CONTACT COIL, CONTATOR (NOT SHOWN) KIT, CONTACT (NOT SHOWN) CONTACT, AUX. ( NO) CONTACT, AUX. (I NO & I NC) RELAY, OVERLOAD INTERLOCK, ELECT / MECH W/ NC AUX CONTACTS BLOCK, TERMINAL 0 AMP LUG, GROUND RE I POWER LINE FILTER 3996 LIGHT, POWER ON ARC SUPPRESSOR KIT, TERMINAL LUG (SET OF 3) BLOCK, TERMINAL 3999 BARRIER, END BLOCK, END STOP JUMPER, 5-POLE RAIL, DIN 4.00 LONG ASSEMBLY, POWER SUPPLY STANDOFF. HEX #6 X.500 LONG ALUMINUM HOLDER, FUSE POLE 600V. 30A. POLE FUSE. 600 VOLTS 3.5 AMPS FUSE, 0V 5 AMPS FUSE, 600 VOLTS 5.0 AMPS TRANSFORMER, 380/4/550V 50HZ TRANSFORMER, 00/30/460/575V 60HZ TRANSFORMER, 380V, 60HZ. 0V 50HZ STARTER, STARTER, -3A

8 6 STARTER ASSEMBLY D0-D80 STAR DELTA REV A STARTER BACK PANEL CONTACTOR, 0 AMP W/I NO & NC AUX CONTACT COIL, CONTATOR (NOT SHOWN) KIT, CONTACT (NOT SHOWN) CONTACT, AUX. ( NO) CONTACT, AUX. (I NO & I NC) RELAY, OVERLOAD INTERLOCK, ELECT / MECH W/ NC AUX CONTACTS CONTACTOR, 80 AMP W/ I NO & I NC AUX CONTACT COIL, CONTACTOR (NOT SHOWN) KIT, CONTACTOR (NOT SHOWN) CONTACT, AUX. (I-NO & I-NC) ARC SUPPRESSOR KIT, TERMINAL LUG (SET OF 3) BLOCK, TERMINAL 3999 BARRIER, END BLOCK, END STOP JUMPER, 5-POLE RAIL, DIN 4.00 LONG ASSEMBLY, POWER SUPPLY STANDOFF. HEX #6 X.500 LONG ALUMINUM RF POWER LINE FILTER LIGHT, POWER ON HOLDER, FUSE POLE 600V. 30A. POLE FUSE, 600 VOLTS 3.5 AMPS FUSE, 0V 5 AMPS FUSE, 600 VOLTS 5.0 AMPS LUG, GROUND KIT, TERMINAL LUG (SET OF 3) TRANSFORMER, 380/4/550V 50HZ TRANSFORMER, 00/30/460/575V 60HZ TRANSFORMER, 380V, 60HZ. 0V 50HZ STARTER, STARTER, -3A

9 STARTER ASSEMBLY D300-D80 STAR DELTA REV. A STARTER BACK PANEL CONTACTOR, D300 W/I NO & INC COIL, CONTATOR (NOT SHOWN) KIT, CONTACT CONTACT, AUX. ( NO) CONTACT, AUX. (I NO & I NC) RELAY, OVERLOAD INTERLOCK, ELECT / MECH W/ NC AUX CONTACTS CONTACTOR, 80 AMP W/ I NO & I NC AUX CONTACT COIL, CONTACTOR (NOT SHOWN) KIT, CONTACTOR (NOT SHOWN) CONTACT, AUX. (I-NO & I-NC) ARC SUPPRESSOR KIT, TERMINAL LUG (SET OF 3) BLOCK, TERMINAL 3999 BARRIER, END BLOCK, END STOP JUMPER, 5-POLE RAIL, DIN 4.00 LONG ASSEMBLY, POWER SUPPLY STANDOFF. HEX #6 X.500 LONG ALUMINUM RF I POWER LINE FILTER LIGHT, POWER ON HOLDER, FUSE POLE 600V. 30A. POLE FUSE, 600 VOLTS 3.5 AMPS FUSE, 0V 5 AMPS FUSE, 600 VOLTS 5.0 AMPS LUG, GROUND KIT, TERMINAL LUG (SET OF 3) TRANSFORMER, 380/4/550V 50HZ TRANSFORMER, 00/30/460/575V 60HZ TRANSFORMER, 380V, 60HZ. 0V 50HZ STARTER, STARTER, -3A

10 8 STARTER ASSEMBLY D300-D0 STAR DELTA REV. A STARTER BACK PANEL CONTACTOR, D300 W/ I NO & I NC COIL, CONTACTOR (NOT SHOWN) KIT, CONTACT (NOT SHOWN) COIL, CONTACTOR (NOT SHOWN) CONTACT, AUX. (I-NO & I-NC) RAIL, DIN 4.00 LONG INTERLOCK, ELECT / MECH W/ NC AUX CONTACTS CONTACTOR, 0 AMP W/ I NO & I NC AUX CONTACT COIL, CONTACTOR (NOT SHOWN) KIT, CONACT (NOT SHOWN) ARC SUPPRESSOR KIT, TERMINAL LUG (SET OF 3) RELAY, OVERLOAD BLOCK, TERMINAL BARRIER, END BLOCK, END STOP JUMPER, 5-POLE ASSEMBLY, POWER SUPPLY STANDOFF. HEX #6 X.500 LONG ALUMINUM RF I POWER LINE FILTER LIGHT, POWER ON HOLDER, FUSE POLE 600V. 30A. POLE FUSE, 600 VOLTS 3.5 AMPS FUSE, 0V 3.5 AMPS FUSE, 600 VOLTS 5.0 AMPS LUG, GROUND TRANSFORMER, 380/4/550V 50HZ TRANSFORMER, 00/30/460/575V 60HZ TRANSFORMER, 380V, 60HZ. 0V 50HZ STARTER, STARTER, -3A

11 MAJOR COMPONENTS 0/300 HP 9 33 TO MANIFOLD A TO TANK 7A 9A 4 3A A 8A REV 06 XXXXXXXX TANK ASSEMBLY BOLT,.63- X.75 LEG TO BASE A WASHER,.75 B NUT,.63- X SUPPORT, MOTOR, WHITE SUPPORT, MOTOR, BLACK BOLT,.75-0 X 4.50, SUPPORT TO MOUNT 4A NUT, MOUNT, ISOLATION MOTOR BOLT,.50-3 X.00, MOUNT TO BASE BOLT,.75-0 X.50, MOTOR TO SUPPORT 7A NUT, XXXXXXXX DRIVE ASSEMBLY SUPPORT, AIREND, WHITE SUPPORT, AIREND, BLACK 0 XXXXXXXX INLET ASSEMBLY XXXXXXXX AIREND ASSEMBLY BOLT,.00-0 X 6.00, SUPPORT TO MOUNT A NUT, BOLT, M X 30 A/E TO SUPPORT GASKET, A/E TO PIPE BOLT, M X 50 A/E TO PIPE PIPE, AIREND TO CHECK VALVE GASKET BOLT,.63- X.50, MOUNT TO BASE 8A NUT, MOUNT, ISOLATION A/E VALVE, DISCHARGE CHECK TUBE, CHECK VALVE TO TANK BOLT,.75-0 X 6.00, A/E PIPE TO TANK PIPE A NUT, BOLT,.75-0 X A NUT, GASKET, PIPE TO TANK BASE GROUND STRAP LEG, TANK, WHITE LEG, TANK, BEIGE BOLT,.50-3 X. LEG TO TANK 9 XXXXXXXX CONDUIT/JUNCTION BOX ASSEMBLY NEMA XXXXXXXX CONDUIT/JUNCTION BOX ASSEMBLY NEMA 4 9A 3579 SCREW, #0-3 X.50 JUNCTION BOX

12 0 MAJOR COMPONENTS 0/300 HP 33 TO MANIFOLD A TO TANK 7A 9A 4 3A A 8A REV VALVE, SAFETY 00 PSI BUSHING, MANIFOLD,.00TM X.50PF 3A NUT,.38 UNC HOSE,.00 X HOSE,.00 X (EXTENDED UNIT ONLY) ELBOW, 90.00TM SWIVEL (STANDARD UNIT ONLY) STRAIGHT,.00TM X.5PM NOTES: STANDARD FASTENERS SUCH AS NUTS. BOLTS AND SCREWS ARE LISTED AS SUB-ITEMS (EXAMPLE: A). X - ROTATE 80 DEGREES WHEN USING 449 FRAME MOTORS.

13 MAJOR COMPONENTS EP300 HP A TO MANIFOLD A A TO TANK A A 9B 0A REV 03 XXXXXXXX TANK ASSEMBLY X SUPPORT, MOTOR, WHITE SUPPORT, MOTOR, BLACK BOLT, MOTOR TO SUPPORT 3A NUT MOUNT, ISOLATION MOTOR 5 XXXXXXXX DRIVE ASSEMBLY BOLT, MOUNT TO BASE 7 XXXXXXXX INLET ASSEMBLY 8 XXXXXXXX AIREND ASSEMBLY SUPPORT, AIREND, WHITE SUPPORT, AIREND, BLACK BOLT, A/E TO SUPPORT XXXXXXXX CONDUIT/JUNCTION BOX ASSEMBLY NEMA XXXXXXXX CONDUIT/JUNCTION BOX ASSEMBLY NEMA 4 A 3579 SCREW, JUNCTION BOX GASKET, A/E TO PIPE PIPE, A/E TO CHECK VALVE BOLT, A/E TO PIPE GASKET VALVE, DISCHARGE CHECK BOLT, A/E PIPE TO TANK PIPE A NUT TUBE, CHECK VALVE TO TANK TUBE, RESONATOR 9A BOLT, PLATED 9B NUT BOLT 0A NUT MOUNT, ISOLATION A/E BOLT, MOUNT TO BASE A NUT BOLT, SUPPORT TO MOUNT 3A NUT BASE BOLT, LEG TO BASE A WASHER B NUT BOLT, LEG TO TANK BOLT, SUPPORT TO MOUNT 7A NUT LEG, TANK, WHITE LEG, TANK, BEIGE GROUND STRAP MANIFOLD 30A NUT

14 MAJOR COMPONENTS EP300 HP A TO MANIFOLD A A TO TANK A A 9B 0A REV HOSE 063 HOSE, (EXTENDED UNIT ONLY) BUSHING VALVE, SAFETY ELBOW, 90 SWIVEL (STANDARD UNIT ONLY) STRAIGHT NOTE: STANDARD FASTENERS SUCH AS NUTS, BOLTS AND SCREWS ARE LISTED AS SUB-ITEMS (EXAMPLE: A). X- ROTATE 80 WHEN USING 449 FRAME MOTORS

15 MAJOR COMPONENTS 300E HP-WITH OIL PUMP 3 TO SAFETY VALVE TO TANK TO OIL COOLER INLET TO SEPARATOR TANK REV 08 XXXXXXXX TANK ASSEMBLY BOLT, LEG TO BASE A WASHER B NUT X SUPPORT, MOTOR, WHITE SUPPORT, MOTOR, BLACK BOLT, SUPPORT TO MOUNT 4A NUT MOUNT, ISOLATION MOTOR BOLT, MOUNT TO BASE BOLT, MOTOR TO SUPPORT 7A NUT 8 XXXXXXXX DRIVE ASSEMBLY SUPPORT, A/E, WHITE SUPPORT, A/E, BLACK 0 XXXXXXXX INLET ASSEMBLY XXXXXXXX A/E ASSEMBLY BOLT, SUPPORT TO MOUNT BOLT, A/E TO SUPPORT 3A WASHER, LOCK - AIREND TO SUPPORT MOUNT, ISOLATION A/E BOLT, MOUNT TO BASE GASKET, A/E TO PIPE VALVE, DISCHARGE CHECK TUBE, CHECK VALVE TO TANK GASKET, FLANGE BOLT, DISCHARGE, PIPE TO A/E BOLT, DISCHARGE, PIPE TO TANK A NUT BASE GROUND STRAP LEG, TANK, WHITE LEG, TANK, BEIGE BOLT, LEG TO TANK 6 XXXXXXXX JUNCTION BOX, CONDUIT ASSEMBLY 6A 3579 SCREW, JUNCTION BOX VALVE, SAFETY BUSHING MANIFOLD 9A NUT HOSE 0636 HOSE (EXTENDED UNIT ONLY) ELBOW, 90 SWIVEL STRAIGHT NOTE:. STANDARD FASTENERS SUCH AS NUTS, BOLTS AND SCREWS ARE LISTED AS SUB-ITEMS (EXAMPLE: A) X - ROTATE SUPPORT 80 WHEN USING 449 FRAME MOTOR

16 4 MAJOR COMPONENTS 300E HP - NO OIL PUMP TO SAFETY VALVE TO TANK REV 07 XXXXXXXX TANK ASSEMBLY BOLT, LEG TO BASE A WASHER B NUT X SUPPORT, MOTOR, WHITE SUPPORT, MOTOR, BLACK BOLT, SUPPORT TO MOUNT 4A NUT MOUNT, ISOLATION MOTOR BOLT, MOUNT TO BASE BOLT, MOTOR TO SUPPORT 7A NUT 8 XXXXXXXX DRIVE ASSEMBLY SUPPORT, A/E, WHITE SUPPORT, A/E, BLACK 0 XXXXXXXX INLET ASSEMBLY XXXXXXXX A/E ASSEMBLY BOLT, SUPPORT TO MOUNT BOLT, A/E TO SUPPORT 3A WASHER, LOCK A/E TO SUPPORT MOUNT, ISOLATION A/E BOLT, MOUNT TO BASE GASKET, A/E TO PIPE VALVE, DISCHARGE CHECK TUBE, CHECK VALVE TO TANK GASKET, FLANGE BOLT, DISCHARGE PIPE TO A/E BOLT A NUT BASE GROUND STRAP LEG, TANK, WHITE LEG, TANK, BEIGE BOLT, LEG TO TANK 6 XXXXXXXX JUNCTION BOX, CONDUIT ASSEMBLY (NEMA ) XXXXXXXX JUNCTION BOX, COUNDIT ASSEMBLY (NEMA 4) 6A 3579 SCREW, JUNCTION BOX VALVE, SAFETY BUSHING MANIFOLD 9A NUT HOSE ELBOW, 90 SWIVEL STRAIGHT NOTE:. STANDARD FASTENERS SUCH AS NUTS, BOLTS AND SCREWS ARE LISTED AS SUB-ITEMS (EXAMPLE: A) X - ROTATE SUPPORT 80 WHEN USING 449 FRAME MOTOR

17 MAJOR COMPONENTS HP - WITH OIL PUMP REV 06 XXXXXXXX TANK ASSEMBLY BOLT, LEG TO A/E SUPPORT A WASHER B NUT BOLT, MOUNT TO BASE 3A NUT SUPPORT, MOTOR 449 FRAME, WHITE SUPPORT, MOTOR 449 FRAME, BLACK SUPPORT, MOTOR 5000 FRAME, WHITE SUPPORT, MOTOR 5000 FRAME, BLACK MOUNT, ISOLATION MOTOR BOLT, SUPPORT TO MOUNT 6A NUT GROUND STRAP BOLT, MOTOR TO SUPPORT 8A NUT, MOTOR TO SUPPORT 9 XXXXXXXX DRIVE ASSEMBLY SUPPORT, AIREND, WHITE SUPPORT, AIREND, BLACK XXXXXXXX INLET ASSEMBLY XXXXXXXX A/E ASSEMBLY BOLT, SUPPORT TO MOUNT BOLT, A/E TO SUPPORT 4A WASHER, LOCK MOUNT, ISOLATION A/E BOLT, MOUNT TO BASE XXXXXXXX JUNCTION BOX, CONDUIT ASSEMBLY A SCREW, JUNCTION BOX GASKET VALVE, DISCHARGE CHECK BOLT, PIPE TO VALVE PIPE, DISCHARGE (VALVE TO TANK) BOLT, DISCHARGE TO TANK A NUT BASE LEG, TANK, WHITE LEG, TANK, BEIGE BOLT, LEG TO TANK STRAIGHT ELBOW, 90 SWIVEL HOSE MANIFOLD 9A NUT VALVE, SAFETY NOTE: STANDARD FASTENERS SUCH AS NUTS, BOLTS AND SCREWS ARE LISTED AS SUB-ITEMS (EXAMPLE: A).

18 MAJOR COMPONENTS HP - NO OIL PUMP TO MANIFOLD TO TANK REV 06 XXXXXXXX TANK ASSEMBLY BOLT, LEG TO SUPPORT A WASHER B NUT BOLT, MOUNT TO BASE 3A NUT SUPPORT, MOTOR 449 FRAME, WHITE SUPPORT, MOTOR 449 FRAME, BLACK SUPPORT, MOTOR 5000 FRAME, WHITE SUPPORT, MOTOR 5000 FRAME, BLACK MOUNT, ISOLATION MOTOR BOLT, SUPPORT TO MOUNT 6A NUT GROUND STRAP BOLT, MOTOR TO SUPPORT 8A NUT 9 XXXXXXXX DRIVE ASSEMBLY SUPPORT, A/E, WHITE SUPPORT, A/E, BLACK XXXXXXXX INLET ASSEMBLY XXXXXXXX A/E ASSEMBLY BOLT, SUPPORT TO MOUNT BOLT, A/E TO SUPPORT 4A WASHER, LOCK - SUPPORT TO A/E MOUNT, ISOLATION A/E BOLT, MOUNT TO BASE XXXXXXXX JUNCTION BOX, CONDUIT ASSEMBLY A SCREW, JUNCTION BOX GASKET VALVE, DISCHARGE CHECK BOLT, DISCHARGE TO VALVE PIPE, DISCHARGE (VALVE TO TANK) BOLT, DISCHARGE TO TANK A NUT BASE LEG, TANK, WHITE LEG, TANK, BEIGE BOLT, LEG TO TANK STRAIGHT ELBOW, 90 SWIVEL HOSE HOSE (EXTENDED UNIT ONLY) MANIFOLD 9A NUT VALVE, SAFETY NOTE:. STANDARD FASTENERS SUCH AS NUTS, BOLTS AND SCREWS ARE LISTED AS SUB-ITEMS (EXAMPLE: A).

19 MAJOR COMPONENTS HP EXTENDED PKG REV 07 XXXXXXXX TANK ASSEMBLY BOLT, LEG TO BASE A WASHER B NUT SUPPORT, MOTOR, WHITE SUPPORT, MOTOR, BLACK BOLT, SUPPORT TO MOUNT 4A NUT, LOCK MOUNT, ISOLATION MOTOR BOLT, MOUNT TO BASE 6A NUT, MOUNT TO BASE BOLT, MOTOR TO SUPPORT 7A NUT 8 XXXXXXXX DRIVE ASSEMBLY SUPPORT, AIREND, WHITE SUPPORT, AIREND, BEIGE 0 XXXXXXXX INLET ASSEMBLY XXXXXXXX AIREND ASSEMBLY BOLT, SUPPORT TO MOUNT BOLT, A/E TO SUPPORT GASKET, A/E TO PIPE BOLT, A/E TO PIPE TUBE, A/E TO CHECK VALVE GASKET SCREW, TAPTITE MOUNT, ISOLATION A/E VALVE, DISCHARGE CHECK TUBE, CHECK VALVE TO TANK BOLT, A/E PIPE TO TANK PIPE A NUT BOLT 3A NUT GASKET, PIPE TO TANK BASE GROUND STRAP LEG, TANK, WHITE LEG, TANK, BEIGE BOLT, LEG TO TANK 9 XXXXXXXX CONDUIT/JUNCTION BOX ASSEMBLY (NEMA) XXXXXXXX CONDUIT/JUNCTION BOX ASSEMBLY (NEMA4) 9A SCREW, JUNCTION BOX STRAIGHT HOSE MANIFOLD 33A NUT BUSHING # VALVE, SAFETY NOTE:. STANDARD FASTENERS SUCH AS NUTS, BOLTS AND SCREWS ARE LISTED AS SUB-ITEMS (EXAMPLE: A).

20 8 DRIVE TRAIN 0/300 HP TO INSTELLISYS/ STARTER BOX SEE NOTE INSTALL SEAL WITH SOLIDSTEEL CASING THIS SIDE 5 0 SEE NOTE SEE NOTE A REV 04 X MOTOR A BOLT, GEARCASE TO MOTOR B BOLT, GEARCASE TO MOTOR C NUT GASKET, MOTOR TO GEARCASE TAPER PIN, GEARCASE TO MOTOR SLEEVE, SHAFT SEAL, SHAFT O-RING HOUSING, SEAL SCREW SCREW, MALE ROTOR RETAINER PLATE, MALE ROTOR XX GEAR SET 3970 KEY, MALE ROTOR TO GEAR SPACER, GEAR MALE ROTOR SCREW, MOTOR X RETAINER PLATE, MOTOR GASKET, GEARCASE TO A/E FRONT BEARING HOUSING PIN, GEARCASE TO FRONT BEARING HOUSING BREATHER, SEAL SCAVENGE GEARCASE A/R LOCTITE A/R LOCTITE RC/609 FURNISH MOTOR PART NO. (STAMPED ON MOTOR NAMEPLATE) WHEN ORDERING REPLACEMENT. XX GEAR SET PART NUMBER LOCATED ON GEARCASE (ITEM 9) NOTE:. STANDARD FASTENERS SUCH AS NUTS, BOLTS AND SCREWS ARE LISTED AS SUB-ITEMS (EXAMPLE: A).. APPLY ITEM 0 PER I-R PROCEDURE APPLY ITEM PER I-R PROCEDURE 35-3