BRENCO. Wire Strippers. Climbing Equipment Pole Straps. Penta Security Wrenches PHS-1. PHS-2, PHW-1, PW-1 & PW-2
|
|
- Anis Snow
- 6 years ago
- Views:
Transcription
1 7780 Willey Road, Harrison, Ohio Phone: Fax: Climbing Equipment Pole Straps 50 Series The ply 3/ neoprene coated nylon material uses a tongue buckle adjustment. Penta Security Wrenches PHS. PHS, PHW, PW & PW *PHS (3/8 drive) and PHS (/ drive) have stainless steel penta socket welded to 3/ hex socket with a square drive in the center assembly. When used on socket extension, socket can be reversed using either end. *PW has a small penta socket (.55 ) with a handle grip stainless steel tube. *PW has a standard penta head socket with a handle grip stainless steel tube. Length HL Snap LSnap HLS Snap Weigh t 5'" 5NHL 5NL 5NHLS 3.75 lbs. *PHW has a standard penta socket on one end and a 3/ hex on the other end with a captive folding crossrod stainless steel tube. ' 5NHL 5NL 5NHLS 3.75 lbs. '" 53NHL 53NL 53NHLS lbs. 7' 5NHL 5NL 5NHLS lbs. 78 Series These pliable latigo leather straps feature a nylon insert. The stitching is deeply imbedded in the leather for longer wear. Length HL Snap LSnap HLS Snap Weigh t 5'" 78XHL 78XL 78XHLS.5 lbs. ' 78AHL 78AL 78AHLS.5 lbs. '" 78BHL 78BL 78BHLS.5 lbs. 7' 78CHL 78CL 78CHLS lbs
2 7780 Willey Road, Harrison, Ohio Phone: Fax: CL Cable range / to 3/ (.7.5 mm) * Chart for 5AS Descriptio n 5AS Tool w/ Wedge Blade installed, spare Straight Blad e 5AS Tool w/ Wedge Blade installed, spare Wedge Blad e 5AS Tool w/ Straight Blade installed, spare Straight Blad e 5 Wedge Blade (XLP) 58 Straight Blade (EPR) 78 Scoring Blad e SemiCon Scorers 7 * Strips cable insulation. * Precise blade depth adjustment. * Maximizes reliability of installation. * Provides greater speed and increased safety. * No bushings required. * Instructional CD and video available. Descriptio n 700 Series Cable O.D. range / to ( mm) 5CL Tool w/ Wedge Blade installed, spare Straight Blad e 5CL Tool w/ Wedge Blade installed, spare Wedge Blad e 5CL Tool w/ Straight Blade installed, spare Straight Blad e 5 Wedge Blade (XLP) 58 Straight Blade (EPR) 5AS Cable range / to 3/ (.7.5 mm) Pictured: 700SS * Adjustable blade depth ( ) * Square and spiral cut. * Scores (scribes) semicon without damage to insulation. * Leaf springs maintain constant pressure during operation. * Instructional CD video available. Descriptio n 700 Adjustable Blade Scorer with square cut/ spiral cut 700SS Adjustable Blade Scorer dial locking set screw with square cut / spiral cut & * Dual functions strips cable insulation and scores SemiCon. * Adjustable SemiCon scoring.00 to.090. * Combines feature of 5CL Speed Stripper and 700 SemiCon Scorer. See Chart..Top Right 700LC 700SSLC Adjustable Blade Scorer with square Saddle relief for closein cut cut / spiral cut Adjustable Blade Scorer with square cut / spiral cut & dial locking set screw Saddle relief for closein cut 78 Replacement Blade all tools
3 Willey Road, Harrison, Ohio Phone: Fax: SemiCon Scorers 70 / 70L Series Cable O.D. range / to ( mm) SemiCon Scorers 800 / 80 Series Cable O.D. range 3/ to 3 (.57. mm) Pictured 70 & 700L * Fixed blade depth. * Square and spiral cut (70 Series) * Square, spiral and lengthwise cut (70L Series) * Scores (scribes) semicon without damage to insulation * Leaf springs maintain constant pressure during opera tion. * Consult for additional blade depths. Pictured 800 * Adjustable blade depth 800 ( ) * Fixed blade depth 80 Series * Square and spiral cut * Scores (scribes) semicon without damage to insulation * Coil springs maintain constant pressure during operation. Descriptio n Descriptio n 70 Fixed Blade Scorer cut / spiral cut..03" (.58 mm) depth with square 800 Adjustable spiral cut Blade Scorer with square cut / 70 Fixed Blade Scorer cut / spiral cut.08" (.7 mm) depth with square 800SS Adjustable Blade Scorer with square cut / spiral cutdial locking set screw 70 Fixed Blade Scorer cut spiral cut.033" (.8 mm) depth with square 800LC Adjustable Blade Scorer with square cut / spiral cut Saddle relief for closein cut 703 Fixed Blade Scorer cut / spiral cut.037" (.9 mm) depth with square 80 Fixed Blade Scorer.037" (9 mm) depth with square cut / spiral cut 70L Fixed Blade Scorer.03" (.58 mm) depth with square cut / spiral cut / lengthwise cut 80 Fixed Blade Scorer.0" (.7 mm) depth with square cut / spiral cut 70L Fixed Blade Scorer.08" (.7 mm) depth with square cut / spiral cut / lengthwise cut 80 Fixed Blade Scorer.055" (.0 mm) depth with square cut / spiral cut 70L Fixed Blade Scorer.033" (.8 mm) depth with square cut / spiral cut / lengthwise cut 803 Fixed Blade Scorer.0" (.3 mm) depth with square cut / spiral cut 703L Fixed Blade Scorer.037" (.9 mm) depth with square cut / spiral cut / lengthwise cut 78 Replacement Blade (all tools) 78 Replacement blade all tools 80075
4 7780 Willey Road, Harrison, Ohio Phone: Fax: SNAP Cable End Strippers x Plus & x Plus * For 00 volt secondary cable * Cutting heads for # AWG to conductors (concentric, compressed or compacted) * Strips 5 mil to 0 mil secondary insulations * Choice of square cut or chamfer cut blades * Strips quickly, even in cold climates * Guarded cutting blades ensure safety * Precision stripping with no conductor damage * Bushings change easily with hex wrench * Extensions (strips additional.5 ) available * U.S. Patent : D97,90 * x: Length w/ bushings:.5x5 in. (x7 mm); weight: oz. (397 g) * x: Length w/ bushings: 5.75 in. ( mm); weight: 8 oz. (7 g) x Plus x Plus Power Driven End Strippers 8 & 8 SNAP * Ergonomic end stripping tools for 00 volt secondary cable for use with a low or variable speed power drill. * Tools designed to reduce working time and effort on repetitive stripping functions. * New adjustable strip stop with adjustment window allows easy setup for precise strip lengths from 0.5 (5.9 mm) to.5 (3. mm) * Uses standard x and x bushings: From # AWG to (concentric, compressed, or compacted) * 8 SNAP adds a bushing quick disconnect feature eliminating the need for a hex wrench * 3/8 & / square socket adapters available 8 8 SNAP Descriptio n /" (.35) hex for quick chucks 3/8" Length Weigh t.3" 0. oz. 8.5" w/ bushing DoubleEnded End Stripper * For 00 volt cables, AWG to 000 * Squarecuts two specific cable sizes * Clean strips quickly with no conductor damage * Stripping length preset at factory, special order * U.S. Patent : 97,90 * Length: in.(5 mm) * Weight: lb. (5 g) Power Driven End Stripper A * Ergonomic end stripper tool for 00 volt secondary cable, / 0 AWG to 000 designed for use with a low or variable speed power drill * Tool designed to reduce working time and effort on repetitive stripping functions * New adjustable strip stop with adjustment window allows easy setup for precise strip lengths from in. (5. mm) to.5 in. (.3 mm) * Choice of Drill Drive or Socket Drive adapters available * Uses standard bushings * Strips quickly, even in cold climates * Precision stripping with no conductor damage * Guarded cutting blades enusre safety * Length without bushings: 7. in. (89 mm) * Weight without bushings: 5 oz. ( g).5 lbs. w/ bushing A 8 8SNAP & CHART CONTINUED...TOPRIGHT w/ 3/8" Drill Driv e 30 w/ /" Hex Driv e 30 w/ 3/8" Square Socket Driv e 303 w/ /" Square Socket Driv e
5 Willey Road, Harrison, Ohio Phone: Fax: x Plus & x Plus Bushings to Square Cut Insulation *These tables should only be used as a guide. Concentric Strand 5 MIL 0 MIL.90"/7.37mm/ "/8.mm/ "/9.9mm/ "/8.00mm/0.35"/9.7mm/ "/.8mm/0.5"/.8mm/0750.5"/.8mm/ "/3.08mm/ "/9.9mm/ "/3.08mm/ "/.35mm/ "/5.mm/050.5"/.89mm/ "/.35mm/ "/.99mm/0000.5"/.89mm/ "/8.mm/ "/.99mm/ "/.mm/ "/7.53mm/ "/8.80mm/ Compressed Strand.75"/9.3mm/ "/.97mm/ "/5.5mm/ "/0.07mm/ "/.mm/ "/.mm/ MIL 0 MIL.90"/7.37mm/ "/8.mm/ "/9.9mm/ "/8.00mm/0.35"/9.7mm/ "/0.5mm/050.5"/.8mm/0750.5"/.8mm/ "/3.08mm/ "/9.9mm/ "/.5mm/00.50"/3.7mm/05.590"/.99mm/0000.5"/.89mm/ "/3.7mm/05.590"/.99mm/0000.0"/.mm/0.90"/7.53mm/ "/.99mm/ "/5.mm/0575.5"/.89mm/ "/8.80mm/ Compacted Strand.70"/8.80mm/07.80"/.3mm/8.95"/.5mm/ "/9.3mm/ "/.mm/ "/5.78mm/ MIL 0 MIL.90"/7.37mm/ "/8.mm/ "/9.9mm/ "/8.00mm/0.35"/9.7mm/ "/0.5mm/050.0"/.8mm/0.5"/.80mm/ "/.35mm/00.390"/9.9mm/ "/.8mm/ "/3.08mm/ "/.35mm/ "/5.mm/050.55"/3.08mm/ "/.35mm/ "/5.mm/050.5"/.89mm/ "/.35mm/ "/.99mm/ "/.mm/ "/7.35mm/ "/8.mm/ "/0.07mm/ "/3.mm/950.70"/8.80mm/ "/.3mm/ "/.5mm/97575
6 Square Cut Bushing Selection Charts for Electrical Wire *These tables should only be used as a guide. Standard Kit Sets Bushing Part # THHN Copper Kit P/N: Willey Road, Harrison, Ohio Phone: Fax: XHHW Copper Kit P/N: 390 x, x and 8 Tools Bushings may be ordered separately (by bushing part numbers) or in four standard kit configurations (part numbers shown below) by wore type. Each of these kits come with a x body, the bushings as shown, and tool case. THHN/XHHN Aluminum Size Kit P/N: 3998 RHW/RHH/USE Copper Size Kit P/N: S 03530S 0 030S S S S S 0550S S 05750S S S S S S 77550S 80050S S 85050S S S 97550S 0575 Special Order Sizes (not included in standard Kit Sets above) 050S 0S 0750S 000S 750S
7 7780 Willey Road, Harrison, Ohio Phone: Fax: x Plus & x Plus Bushings to Chamfer Cut Insulation *These tables should only be used as a guide. Concentric Strand 5 MIL 0 MIL.90"/7.37mm/ "/8.mm/30.390"/9.9mm/ "/8.00mm/.35"/9.7mm/3750.0"/.8mm/.5"/.8mm/750.5"/.8mm/750.55"/3.08mm/ "/9.9mm/ "/3.08mm/550.55"/.35mm/5750.5"/5.mm/50.5"/.89mm/750.55"/.35mm/ "/.99mm/000.5"/.89mm/750.75"/8.mm/ "/.99mm/0075.0"/.mm/ "/7.53mm/ "/8.80mm/ Compressed Strand.75"/9.3mm/ "/.97mm/ "/5.5mm/ "/0.07mm/ "/.mm/ "/.mm/ MIL 0 MIL.90"/7.37mm/ "/8.mm/30.390"/9.9mm/ "/8.00mm/.35"/9.7mm/3750.5"/0.5mm/50.5"/.8mm/750.5"/.8mm/750.55"/3.08mm/ "/9.9mm/ "/.5mm/0.50"/3.7mm/5.590"/.99mm/000.5"/.89mm/750.50"/3.7mm/5.590"/.99mm/000.0"/.mm/.90"/7.53mm/ "/.99mm/0075.5"/5.mm/575.5"/.89mm/ "/8.80mm/ Compacted Strand.70"/8.80mm/7.80"/.3mm/38.95"/.5mm/ "/9.3mm/ "/.mm/ "/5.78mm/ MIL 0 MIL.90"/7.37mm/ "/8.mm/30.390"/9.9mm/ "/8.00mm/.35"/9.7mm/3750.5"/0.5mm/50.0"/.8mm/.5"/.80mm/750.90"/.35mm/0.390"/9.9mm/0075.5"/.8mm/750.55"/3.08mm/550.55"/.35mm/5750.5"/5.mm/50.55"/3.08mm/550.55"/.35mm/5750.5"/5.mm/50.5"/.89mm/750.55"/.35mm/ "/.99mm/0075.0"/.mm/ "/7.35mm/ "/8.mm/ "/0.07mm/ "/3.mm/ "/8.80mm/ "/.3mm/ "/.5mm/397575
8 and A Bushings to Square Cut Insulation Concentric Strand 0 MIL 7780 Willey Road, Harrison, Ohio Phone: Fax: *These tables should only be used as a guide. *Bushing selection tables by conductor size and insulation thickness (part numbers listed). 0 MIL 3.55"/3.08mm/ "/.35mm/ "/5.mm/550.5"/.89mm/ "/.35mm/ "/.99mm/0.5"/.89mm/ "/8.mm/ "/.99mm/75.0"/.mm/ "/7.53mm/ "/8.80mm/ "/9.3mm/ "/.97mm/ "/5.5mm/00.05"/7.05mm/ "/0.07mm/ "/.mm/ "/.mm/ "/8.3mm/ "/0.70mm/ "/.5mm/ "/7.05mm/ "/8.9mm/ Compressed Strand 0 MIL.5"/9.59mm/ "/30.3mm/0.5"/30.8mm/550.90"/3.77mm/ "/3.0mm/53.90"/30.3mm/75.5"/30.8mm/5575.5"/3.3mm/ "/33.0mm/ "/3.7mm/ "/30.8mm/5590.0"/3.50mm/ "/3.77mm/ "/3.7mm/ "/35.3mm/90 0 MIL.90"/.5mm/50.50"/3.7mm/55.590"/.99mm/0.5"/.89mm/ "/3.7mm/55.590"/.99mm/0.0"/.mm/5.90"/7.53mm/ "/.99mm/75.5"/5.mm/5575.5"/.89mm/ "/8.80mm/ "/8.80mm/57.80"/.3mm/58.95"/.5mm/ "/7.05mm/ "/9.3mm/ "/.mm/ "/5.78mm/ "/7.9mm/75.85"/0.70mm/ "/3.7mm/ "/.mm/ "/8.3mm/ Compacted Strand.0"/8.9mm/5.5"/9.59mm/ "/30.3mm/0.0"/3.50mm/5.35"/33.0mm/5.5"/9.39mm/ "/30.3mm/75.5"/30.8mm/ "/3.77mm/ "/3.0mm/575.90"/30.3mm/90.5"/30.8mm/5590.5"/3.3mm/ "/33.0mm/ "/3.7mm/ MIL 0 MIL.5"/.8mm/ "/3.08mm/ "/.35mm/ "/5.mm/550.55"/3.08mm/ "/.5mm/ "/5.mm/550.5"/.89mm/ "/.35mm/ "/.99mm/75.0"/.mm/ "/7.53mm/ "/8.mm/ "/0.07mm/ "/3.7mm/ "/5.78mm/ "/8.80mm/ "/.3mm/ "/.5mm/ "/.mm/ "/0.07mm/ "/.97mm/ "/5.5mm/ "/7.9mm/ "/7.05mm/ "/7.9mm/0.090"/8.9mm/5.90"/30.3mm/0.5"/3.3mm/ "/7.9mm/75.0"/8.9mm/ "/9.59mm/ "/30.8mm/ "/3.77mm/ "/8.9mm/ "/9.59mm/ "/30.3mm/90.5"/3.3mm/ "/33.0mm/53590
9 7780 Willey Road, Harrison, Ohio Phone: Fax: Adjustable Cable Stripper U Adjustable MidSpan Strippers 55 * Universal tool for end stripping or mid span stripping of high density outer jackets or insulating material *End stripping and mid span stripping with different blades (interchangeable) *For cable sizes from / up to / (.7 to 38. mm) *Adjustable design perfect for contractors working on common secondary voltage applications *Removes outer jacket on smaller primary power cables (all major insulation shields) *When using mid span blade stripping version, caution must be used when end stripping concentric neutral cables *Versatile design also includes ability to strip secondary and primary insulations *Quickly and easily adjusts to cable size with spring loaded triggeraction jaw *Micro adjustable blade allows accurate setup for a variety of insulation thicknesses *Self feeding tool design allows easy and efficient operation with minimal effort *Compact design for tighter work space requirements *Rugged, all metal body design *Length: 8 in. (00 mm) *Weight:.7 lb. (770 g) *For 5 to 5 kv cable *00 to.5 in. (5. to.8 mm) Cable O.D. *Operates on all tree wire and spacer cables *Designed for hand operation only *Adjusts easily to handle variety of cable sizes and insulation thicknesses *Versatile tool which can be used for: Midspan stripping of aerial cable End stripping and jacket removal of URD cable *Fast slideaction adjustment for many cable sizes *Easy grip plastic handles *Tools and blades marked for easy adjustment *Length:.5 in (9 mm) *Weight:. lb. (.8kg) 55 Cable O.D..00.5" 5..5 mm Insulation Thickness Adjustable URD End Stripper 50 & 50A Cutting Blade Ringing Blade up to 300 CB 00 CB 9 Functio n Installed Blade UE UM UEM End Stripping Only *Outer jackets up to.5" OD *Insulation to.5"od, up to 35kV 35 mils max thickness Mid Span/End Stripping *Outer jackets up to.5" OD *75 mil max insulation / covering thickness End Strip and Mid Span Strippin g CB CB 3 CB Installed CB 3 Installed *For AWG to 000 URD cable *. to.5 in. (.70 to 57.5 mm) cable O.D. *Two handles permit safe, easy operation on XLPE, plastic, polyethylene and EPR insulation of all thicknesses *Adjustable strip stop bar gives an exact stripped conductor length and can be rotated to allow unlimited stripping *Safe, clean cuts prevent conductor damage *DB 50 blade included with tool *Adjustable to fit wide range of cable O.D. s *Replacement blades: CB 50AStandard CB 50Long *Length:.5 in (38mm) *Weight:. lb. (953g) *Retrofit Kit also available #3730
10 7780 Willey Road, Harrison, Ohio Phone: Fax: Adjustable End Stripper 58 Adjustable Cable Stripper U 5 *For.5 to.5 in. (5.88 to.8 mm) cable O.D. *Fast, slideaction adjustment *Two handle power turning strips easily *Clean, safe cuts prevent conductor damage *Adjustable to fit wide range of cable O.D. s *Replacement blade: CB 00 *Length:.5 in. (38 mm) *Weight:. lb. (953 g) Adjustable URD Jacket Stripper *For stripping encapsulated jackets of # AWG to 000 URD cables *Cable O.D. s up to.5 in. (57.5 mm) *Blade adjustment feature offers precise positioning. *Designing specifically for removal of tough polyethylene encapsulated jackets *Can also be used as an adjustable end stripper *Two handles permit safe, easy operation *Prevents damage to underlying concentric conductors *Replacement blade: CB 55K *Length:.5 in (38Mm) *Weight:. lb. (953 g) * Universal tool for end stripping or mid span stripping of outer jackets or insulating material *End stripping and mid span stripping with different blades (interchangeable) * Dual position jaw for cable sizes from / up to / (.7 to 3.5 mm) cable O.D. is versatile for electric utility applications. *Removes outer jacket on primary power cable (all major insulation shields) *When using mid span blade stripping version, caution must be used when end stripping concentric neutral cables. *Versatile design also includes ability to strip secondary and primary cable insulations *Quickly and easily adjusts to cable size with spring loaded triggeraction jaw *Micro adjustable blade allows accurate setup for a variety of insulation thicknesses *Self feeding tool design allows easy and efficient operation with minimal effort *Compact design for tighter work space requirements *Rugged, all metal body design *Length: 8 in. (00 mm) *Weight:.9 lb (80 g) UE UM UEM Functio n End Stripping Only *Outer jackets up to.5" OD (3.5 mm) *Insulation to.5" OD, up to 35 kv35 mils (8.8 mm) maximum thickness Mid Span / End Stripping *Outer jackets up to.5" OD (3.5 mm) *75 mil (. mm) maximum insulation/ covering thickness (5 kv) End Strip and Mid Span Strippin g Installed Blade CB 50K CB 3 CB 50K included CB 3 included 80075
11 7780 Willey Road, Harrison, Ohio Phone: Fax: Removal of Soft Rubber Jackets Cable O.D. Range 7, 7A Metallic Sheath Removal Tools B P AR.38".75" B P AR.75".0" B P AR.5".95" Removal of SemiCon Cable O.D. Range B P A.38".75" B P A.75".0" *For stripping Glued LC and CLX shielding from cables *Shielding is removed in a helical cutting action *Used with cutters to snip off excess shielding *Caution...Very sharp...use protection when removing. C atalog Cable O.D ".5".057.mm Replacement Blade CB 98 Length 0" (5mm) Weigh t lbs (908g) B P AH.0".30" B P A.5".75" B P AH.75".95" B P AK.95".00" Blade Depth Range is from mil to 90 mils *Other sizes available by special order 7A.90"3.5" 8.39.mm CB 90." (mm).7 lbs. (g) IC, IC URD Insulation Chamfer Tools Adjustable Blade BANANA PEELER BP A, BP A, BP A *Adjustable blade semicon scoring tool *Scoring depth from to 90 mils (.05 to.8 mm) *For strippable semicon URD cable shield *One hand scoring of circumference and length *Springloaded blade assembly assures consistent scoring depth *Teflon coated cable guide *Semicon is cleanly removed with no damage to underlying insulation *Convertible to a fixed setting. *Replacement blade: #330 *Length: 9. in (39 mm) *Weight: 3 oz (39 g) *For.50 to.875 in (.5 to 7.3 mm) cable O.D. *Chamfers 5 to 35 kv cable *Creates a 5 degree bevel, approximately.5 in (3.7 mm) long *For XLPE insulations *Perfect for premolded splices, elbows and terminators *Complete operation takes 0 seconds or less *Adjusts easily to fit different cable insulations *Blades are recessed to prevent injury and blade damage *Replacement blade: CB 3 Cable O.D. Range (over insulation) Tool Diameter Weigh t IC.50.0".53.00mm 3 /"/88.9mm 0oz/ 8g Continued TOP RIGHT... IC " mm 3/"/0.mm.5oz/355g
12 5/ 5A End Stripper 7780 Willey Road, Harrison, Ohio Phone: Fax: Bushing Selection Table *These tables should only be used as a guide. C able O.D. to be stripped Bushing #. 0".85"/.07.mm ".30"/7.7.87mm ".335"/ mm ".30"/8.539.mm ".385/ mm ".0"/9.800.mm 5.5. ".35"/0..05mm ".0"/.07.8mm ".85"/.7.3mm 5.. 8".50"/.3.95mm ".535"/ mm ".50"/3..mm ".585"/.5.8mm ".0"/.885.9mm 5.5. ".35/5.5.3mm ".0"/.5.7mm ".85"/.797.0mm ".70"/7.8.03mm ".735"/8.08.7mm ".70"/ mm C able O.D. to be strippe d Bushing #. 7".785"/ mm ".80"/ mm ".835"/0.0.mm ".80"/.3.8mm ".885"/.87.8mm ".90"/.503.mm ".935"/3.3.75mm ".90"/ m m ".985"/.5.0mm ".00"/5.05.5mm ".035"/5.7.9mm ".00"/.3.9mm ".085"/.957.5mm ".0"/ mm 5.5.".35"/8.8.83mm ".0"/8.859.mm 5.75.".85"/ mm ".0"/ mm 5.5.".35"/ mm ".0"/ mm 5.75.".85"/3.033.mm 5.300
13 8 End Stripper 7780 Willey Road, Harrison, Ohio Phone: Fax: Bushing Selection Table *These tables should only be used as a guide. C able O.D. to be stripped Bushing #. 9".985"/.5.0mm ".00"/5.05.5mm.05.0".035"/5.8.9mm ".00"/.3.9mm.075.0".085"/.957.5mm.00.08".0"/ mm.5.".35"/8.8.83mm.50.3".0"/8.859.mm.75.".85"/ mm.00.8".0"/ mm.5.".35"/ mm.50.3".0"/ mm.75.".85"/3.033.mm.300.8".30"/3.33.7mm.35.3".335/ mm..33".30"/ mm.375.3".385"/ mm.00.38".0"/ mm.5 C able O.D. to be strippe d Bushing #.3".0"/ mm.75.".85"/ mm..8".50"/ mm.55.5".535"/ mm ".50"/ mm.575.5".585"/39.50.mm.00.58".0"/ mm.5.".35"/0.9.53mm.50.3".0"/.55.mm.75.".85"/.9.80mm.700.8".70"/.83.3mm.75.7".735"/3..07mm ".70"/.09.70mm.775.7".785"/.735.3mm ".80"/ mm.85.8".835"/.00.mm ".80"/.37.mm.875.8".885"/ mm.900.".35"/ mm.50
14 7780 Willey Road, Harrison, Ohio Phone: Fax: End Stripper 9 Adjustable End Stripper 5A *Upgraded model of the 5 *Same basic function as the 5 Model plus: New adjustable strip stop w/ rotary mechanism New adjustment window allows easy setting of stop for precise strip lengths *Strip lengths from 0.5 in. (5.9 mm) up to.5 in. maximum (3.5 mm) *For 00 volt to 35 kv cables *0.0 to.5 in (.0 to 3.3 mm) Cable O.D. *Strips XLPE, polyethylene, and EPR insulation up to 00 mils thick *Precision stripping of insulation only or with semicon over insulation *Ideal for primary URD cable *Guarded cutting blade prevents injury *Accepts SW ratchet wrench for leverage *Length: 8 in (03 mm) *Weight:. lb (5 g) *Replacement Blade: CB 7 End Stripper 5 *For 00 volt to 35 kv cables *.0 to.5 in (.0 to 3.3 mm) cable O.D. *Strips XLPE, polyethylene and EPR insulation *Precision stripping of insulation only or insulation and semicon simultaneously *Ideal for primary URD cable *Guarded cutting blade prevents injury *Rotating stop bar permits accurate preset stripping lengths of up to in. (0.0 mm). Bar removable for infinite stripping. *Accepts SW ratchet wrench for leverage *Bushing insert fits over cable Bushing insert presets cutting blade depth Bushings can be changed easily and quickly * 5B available to strip from 3/ 5 3/ lengths *Length: in (5 mm) *Weight: lb. (5 g) Insulation Materials Insulation Thickness Max. Replacement Blade Rotating Stop Bar *For 5 to kv cables *.90 to.900 in (.38 to 8. mm) cable O.D. *Strips XLPE, polyethylene and EPR insulation *Precision stripping with NO conductor damage *Guarded cutting blade prevents injury *Rotating stop bar permits accurate preset stripping lengths of up to 7/ in (.9 mm). Bar removable for infinite stripping. *WA adapter permits use of SW ratchet wrench *WA 3 adapter allows strip lengths up to 5 / in (39.7 mm) and also use of the SW ratchet wrench *Bushing insert fits over cable Bushing insert presets cutting blade depth Bushings can be changed easily and quickly *Length:.5 in (5 mm) *Weight:.5 lb (80 g) M odel Part # Strip Length 900 / 7/" w/ WA w/ WA 3 97 / 7/" 98 /5 /" Replacement Blade.70.90mm CB mm CB mm CB 8 ** SEE BUSHING SELECTION CHARTS ON THE FOLLOWING PAGES FOR THESE TOOLS! Rotating Stop Bar XLPE or EPR 00 mil s CB
15 Willey Road, Harrison, Ohio Phone: Fax: Bucket Hooks Load Break Elbow Probe Insertion Tool with 5 inlb torque delivery system PIT T SH SH *For 5 TO 3.5 kv elbow small interface *For quick and easy insertion of the probe inside the elbow *Prevents load break probe contamination *Prevents load break probe breakage *Reduces cross threading *Provides the proper tightening forces as recommended by the elbow manufacturers *Multiple torque delivery system: Delivers 5 inchpound torque Adjustable (Full T Handle or Moment arm for tight locations) and removable T handle *Load Break Probe quickly removed by simply reversing the tightening action *Available for all load break elbows *Length: in (38.3 mm) *Weight: lb. oz. (58 g) SH These bucket hooks are made from Nylon. Tested to hold in excess of 300 lbs. Will fit on most bucket types with or without liners. Styles SH & SH5 have hooks for use inside and outside the bucket. SH5 Load Break Elbow Probe Insertion Tool PIT *For 3.5 kv Load Break Elbow * hex on end of tool *Prevents probe arc follower contamination *Prevents probe arc follower breakage *Provides a tight connection and reduces cross threading *Available for all load break elbows *Length: 0 in (5 mm) *Weight: lb (5 g) 80075
Quality. tools for. Installing. Power Cable. Systems
Quality tools for Installing Power Cable Systems Quality toolsfor Installing Power Cable Systems Speed Systems has been manufacturing quality, field-tested products since 1970. Our tools are designed and
More information11. CABLE SPECIFICATIONS 5kV, 15kV, AND 35kV RUBBER OR PLASTIC INSULATED CABLE
11. CABLE SPECIFICATIONS 5kV, 15kV, AND 35kV RUBBER OR PLASTIC INSULATED CABLE 11.1 GENERAL Only single conductor cables as described in this section are acceptable for connection to PECO Energy Company
More informationSpeedi-Spreader Cable Spreader
HAND TOOLs Klein Journeyman T-Handle Hex Keys 6" Overall Length 3R7 5/16" $6.50 3R8 3/8" $7.90 9" Overall Length 4R1 5/16" $6.90 4R2 3/8" $8.90 70573 27K 70574 27L 70575 27M 27K- 6 inch Sizes 5/64, 3/32,
More informationLoadbreak Elbows. 3 Loadbreak Elbows. 200 Amp 5-15 kv Industrial pg Loadbreak Elbows. 200 Amp 25 kv Industrial pg. 254.
3 Loadbreak Elbows 200 Amp 5-15 kv Industrial pg. 252 Loadbreak Elbows 200 Amp 25 kv Industrial pg. 254 Loadbreak Elbows 200 Amp Industrial pg. 255 Loadbreak Elbows Accessories 3 Loadbreak Elbows 3M 200
More informationLoadbreak Apparatus Connectors
Loadbreak Apparatus Connectors 200 A 25 kv Class POSI-BREAK Loadbreak Elbow Connector with Optional Integral Jacket Seal* Electrical Apparatus 500-29-7 general The POSI-BREAK Loadbreak Elbow Connector
More informationHigh Voltage Joints and Terminations up to 72,5 kv 145 kv
High Voltage Joints and Terminations up to 72,5 kv 145 kv 3M Cold Shrink Termination Kits QT-III and Joint Kits are designed to provide high reliability and save you time and money. They install quickly
More informationRaychem CSJA Safety Instructions. Safety Instructions. Customer Service. Kit Contents. Installation Instructions
Raychem CSJA 1521 Cold-Shrinkable Splice for single core polymeric insulated (XLPE-EPR) cables up to 15kV for tape, wire, Unishield, LC shield, JCN, and flat strap neutral cable UniShield is a trademark
More informationLoadbreak Apparatus Connectors. 200 A 15 kv Class Loadbreak Elbow Connector with Optional Integral Jacket Seal GENERAL
Loadbreak Apparatus Connectors 200 A 15 kv Class Loadbreak Elbow Connector with Optional Integral Jacket Seal Electrical Apparatus 500-10-7 GENERAL The Cooper Power Systems Loadbreak Elbow Connector is
More informationAccessories. Introduction. Cable Hangers LINE PRODUCTS TRANSMISSION
Accessories Introduction While a number of cable related accessories are available on the market, RFS components are of the highest quality and are designed to provide years of trouble-free service. Together
More informationCategory # 1 - Overhead, Primary, & Secondary Conductors
City of Alexandria Bid Proposal # 2214 Open Date - November 27, 2018 Page BF1of BF7 Category # 1 - Overhead, Primary, & Secondary Conductors 1. 2801602110 17,100 LB. CABLE, 477 MCM AAC CONDUCTOR, $ - $
More informationSpeedy Sharp Knife Sharpener $ O. Five Key Set Sizes: 3/16, 7/32, 1/4, 5/16,3/8 $9.90
HAND TOOLS Klein Journeyman T-Handle Hex Keys 25Z 25R 6" Overall Length 3R7 5/16" $6.50 3R8 3/8" $7.90 9" Overall Length 4R1 5/16" $7.50 4R2 3/8" $9.50 Speedy Sharp Knife Sharpener $9.90 Lansky Knife Sharpener
More information25 kv class fused loadbreak elbow connector
Loadbreak Connectors Catalog Data CA650070EN Supersedes 500-111 July 2012 COOPER POWER SERIES 25 kv class fused loadbreak elbow connector General Eaton combines a fully-shielded and insulated plug-in termination
More information200 A 25 and 28 kv class POSI-BREAK loadbreak elbow connector with optional integral jacket seal-canadian Edition
Loadbreak Connectors CA650101EN Supersedes 500-29-7C November 2011 COOPER POWER SERIES 200 A 25 and 28 kv class POSI-BREAK loadbreak elbow connector with optional integral jacket seal-canadian Edition
More information11. CABLE SPECIFICATIONS 5kV, 15kV, AND 35kV RUBBER OR PLASTIC INSULATED CABLE
11. CABLE SPECIFICATIONS 5kV, 15kV, AND 35kV RUBBER OR PLASTIC INSULATED CABLE 11.1 GENERAL Only single conductor cables as described in this section are acceptable for connection to PECO Energy Company
More information200 A 25 kv and 28 kv class loadbreak elbow connector with optional integral jacket seal-canadian Edition
Loadbreak Connector CA650099EN Supersedes 500-28-7C November 2011 COOPER POWER SERIES 200 A 25 kv and 28 kv class loadbreak elbow connector with optional integral jacket seal-canadian Edition General Eaton
More informationVoice/Data/ Video Tools
Voice/Data/ Video Tools Professionals prefer Klein's high quality materials and construction for durable long-lasting tools. Klein VDV Tools provide time savings and reliability, especially in high-volume
More informationMedium Voltage Power Cables
Medium Voltage Power s Distribution s (CN s) are suitable for use above ground in open air, in conduit in air, directly buried, in underground duct, or aerially when suspended on a messenger wire. CN cables
More information200 A 15 kv class loadbreak elbow connector with optional integral jacket seal
Loadbreak Connectors Catalog Data CA650062EN Supersedes June 2015 COOPER POWER SERIES 200 A 15 kv class loadbreak elbow connector with optional integral jacket seal General Eaton s Cooper Power series
More information200 A 15 kv class loadbreak elbow connector with optional integral jacket seal-canadian Edition
Loadbreak Connectors Catalog Data CA650063EN Supersedes 500-10-7C November 2011 COOPER POWER SERIES 200 A 15 kv class loadbreak elbow connector with optional integral jacket seal-canadian Edition General
More informationINSTALLATION PRODUCTION TESTS
Deadbreak Apparatus Connectors 600 A 15/25 kv Class Bol-T Deadbreak Connector Electrical Apparatus 600-10 GENERAL The Cooper Power Systems 600 A, 15/25 kv Class Bol-T Deadbreak Connector is used to terminate
More informationB Polyethylene Tape. B Splicing Covering. Holster
Splicing Materials B Polyethylene Tape Translucent 8-mil polyethylene tape made from electrical grade base material. Intended for use in restoring the dielectric strength between the core and sheath at
More informationIDEAL Stripmaster Model 950 Wire Stripper #45-950
IDEAL Stripmaster Model 950 Wire Stripper #45-950 IDEAL Stripmaster Model 950 Wire Stripper Introduction The IDEAL Stripmaster Model 950 Wire Stripper is an electrically operated, pneumatic precision production
More informationAround the cable. Stripping.... convincing solutions
Around the cable Stripping... convincing solutions INFO Cable strippers How to use: For removing the exterior protective sleeve Junctions and distribution boxes For lengthwise and circular cuts Round PVC
More information600 A 35 kv class BT-TAP deadbreak connector
Supersedes 600-55 July 2014 600 A 35 kv class BT-TAP deadbreak connector General Eaton's Cooper Power Systems 600 A 35 kv Class BT-TAP deadbreak connector is used to terminate high-voltage underground
More informationTests are conducted in accordance with IEEE Standard 386. ac 60 Hz 1 Minute Withstand 50
Deadbreak Apparatus Connectors 600 A 35 kv Class Bol-T Deadbreak Connector Electrical Apparatus 600-50 General The Cooper Power Systems 600 A, 35 kv Class Bol-T Deadbreak Connector is used to terminate
More informationPolymer Insulators A Better Solution
Polymer Insulators A Better Solution October 2016 LET S CONNECT POLYMER INSULATORS Design derived from PLP s many years of worldwide experience and tested to adhere to ANSI C29.5 and ANSI 29.6 insulator
More informationCold Shrink QS T Trifurcating Transition Splice Kit
Cold Shrink QS2012-13-3T Trifurcating Transition Splice Kit Instructions IEEE Std. 404-1993 15 kv Class 110 kv BIL Completed Splice Cable Size Range Requirements PILC 500 kcmil Conductor Size (240 mm 2
More informationInsulated multipole operating tools for front-entry terminal blocks. 1-pole pole pole
Operating Tools Operating tool with partially insulated shaft, ideal for operating terminal blocks Insulated multipole operating tools for front-entry terminal blocks Operating tool (DIN 524), ideal for
More informationDeadbreak Apparatus. connectors. 600 A 15/25 kv Class GENERAL
Deadbreak Apparatus Connectors 600 A 15/25 kv Class BOL-T Deadbreak Connector Electrical Apparatus 600-30 GENERAL The Cooper Power Systems 600 A, 15/25 kv Class BOL-T Deadbreak Connector is used to terminate
More informationDouble Socket Ratchet Wrenches
Double Socket Ratchet Wrenches s heavy-duty Double Socket Ratchet Wrenches can tighten nuts on long bolts or all-thread rod without bottoming out and have a simple lever-operated reverse feature. COLOR-CODED
More informationTELEDYNE INTERCONNECT DEVICES. by TELEDYNE. Handheld Thermal Wire Stripper. Easy to use - Safe and NICK FREE stripping
STRIPALL by TELEDYNE Handheld Thermal Wire Stripper STRIPALL is designed to remove insulation thermally, without nicking the conductor. The insulation is stripped cleanly and quickly, readying the wire
More informationRecoverXLT Refrigerant Recovery Machine
RecoverXLT Refrigerant Recovery Machine Liquid and Vapor Recovery Set Up Liquid recovery is the fastest method, but not all equipment can handle the process Vapor recovery is slower than liquid recovery,
More informationBRENCO. Aerial Tools & Equipment
BRENCO 81 C2 Cable Lasher For cables or cable bundles up to 1.87 in. (4.7 cm) on strands 1/4 in. to 3/8 in. Positive mechanical brake prevents lasher back-up until brake is released. Built to last, the
More informationConnector Systems Inc. SS-20 MACHINE MANUAL
Connector Systems Inc. SS-20 MACHINE MANUAL INTRODUCTION Your SS-20 machine comes to you fully equipped and set up to terminate the style of plug you have requested. Our SS-20N will accommodate those
More information4. SHIELDS. 4.1 Power Cable. 4.2 Electronic Cable Conductor Shield (Strand Shield) Outer Shield (Insulation Shield) 60
4. SHIELDS 4.1 Power Cable 4.1.1 Conductor Shield (Strand Shield) 60 4.1.2 Outer Shield (Insulation Shield) 60 4.2 Electronic Cable 4.2.1 Foil Shield 62 4.2.2 Copper Braid Shield 63 4.2.3 Spiral (Serve)
More informationTerminations. 3M Cold Shrink Terminations FAX TERMINATIONS. Glossary of Terminations Terms 263 Cable Types for Terminating 264 3M
Terminations Glossary of Terminations Terms 263 Cable Types for Terminating 264 3M Cold Shrink QT-III Silicone Rubber Terminations 265 3M Cold Shrink Termination QT-III 69 kv/72,5 kv 270 3M Cold Shrink
More informationTERMINATION ENCLOSURE OPTIONS
TERMINATION ENCLOSURE OPTIONS Add suffix: R - Reverse Stagger the Bus Bars (to run cable in from the top) CU - Copper NEMA Mount Bus Bars C - Plastisol Covers for Bus Bars DF - Dead Fronts T - Tin Plated
More information28 Fusion Machines Fusion Capability for 2 IPS 8 DIPS pipe (63mm 225mm)
Fusion Capability for 2 IPS 8 DIPS pipe (63mm 225mm) Patent No s. 5,814,182 6,212,748 6,212,747 6,021,832 Japanese Patent No 45806 European Patent No 0903215 The line of fusion machines now come in multiple
More informationAround the cable. Stripping. Cable strippers, Wire stripping pliers. haupa...technology that connects
Around the cable Stripping Cable strippers, Wire stripping pliers haupa...technology that connects Cable strippers INFO Cable strippers For quick and simple stripping of the outer protective sheath. Applications:
More informationBUTT-N-TOP GRAPPLE FEATURES & BENEFITS: STANDARD SPECIFICATIONS: OPTIONS: Continued on next page»
BUTT-N-TOP GRAPPLE Weldco-Beales Manufacturing s Butt-n-Top Grapples load, unload, sort, and pile tree length wood with a log loader or standard excavator machine configuration. FEATURES & BENEFITS: Individually
More informationA M Supply Co. Hand Tools Metal Cutting. Metal Cutting. Lenox Seamers. Snips. Milwaukee Snip Sets. Snips. Phone:(405) (800)
Metal Cutting Lenox Seamers Part # L22210 Description 3" Seamer Snips Metal Cutting Milwaukee Snip Sets Part # Description Cut Cap Sheet Metal Cut Cap Stainless L22101 Aviation Snip Left 18 ga 22 ga L22102
More informationPortable High-Voltage Cable Couplers 415, 515
Portable High-Voltage Cable Couplers 415, 515 EPDM Insulators Dura-Tube SM 500 Amperes 15,000 Volts Maximum Corrosion-resistant aluminum Rigid, non-breakable EPDM insulators 500 Amp contacts Portable cable
More informationCut Off and Deburring
Cut Off and Deburring Cut Off and Deburring Heavy Duty Pipe Cutters Heavy-Duty Pipe Cutters RIDGID Heavy-Duty Pipe Cutters for fast, burr-free cutting of steel pipes up to. Extra-long shank protects adjustment
More information2" (50MM) ROTARY HAMMER
" (50MM) ROTARY HAMMER MODEL HR5000 05-03 75 7 70 80 39 3 4 5 6 7 8 63 58 59 60 6 57 56 55 54 3 53 5 5 4 5 6 7 8 9 0 3 4 4 4 43 44 45 46 47 48 49 50 38 37 40 5 6 7 36 35 34 33 3 3 8 9 30 99 84 85 83 8
More informationJUL 17 Rev M
Hand Crimping Tool and Cable Preparation Kit; PN 59981-1 Instruction Sheet 408-6788 24 JUL 17 Rev M PROPER USE GUIDELINES Cumulative Trauma Disorders can result from the prolonged use of manually powered
More informationMR Gradient Cable Field Termination Training
MR Gradient Cable Field Termination Training Field Service Training DOC2081583 Imagination at work Brian Gracyalny 212473777 MR Service Engineering Overview The purpose of this training is to make the
More informationPRESS TOOLS PRODUCT CATALOG
PRESS TOOLS PRODUCT PRESS WITH CONFIDENCE. PRESS WITH THE BEST. RIDGID press tools save you time and money by delivering reliable performance press after press. Every generation of press tools works harder
More informationInfrared LED Handheld Spotlight - Pistol Grip Spotlight w/ 16' Coil Cord - 3 Watt
Infrared LED Handheld Spotlight - Pistol Grip Spotlight w/ 16' Coil Cord - 3 Watt Part #: HL-85-3W1-IR Page: 1 Buy American Compliant The Larson Electronics HL-85-3W1-IR Infrared LED Pistol Grip Spotlight
More informationStandard Knockout Punches 10. Punch Kits for Hydraulic Drivers 11. Draw Stud Selection Guide 13, 14, 18. Special Shape Punches
8 Punching Tools, Hole Saws, Step Bits Page Punching Tools Standard Knockout Punches 10 Slug Buster Knockout Punches 10 Slug Splitter Knockout Punches 10, 12 Punch Kits for Hydraulic Drivers 11 Draw Stud
More informationCold Shrink QS2013-3T-WS Trifurcating Transition Splice Kit
Cold Shrink QS2013-3T-WS Trifurcating Transition Splice Kit Instructions for Shielded and Belted PILC Cable IEEE Std. 404-1993 15 kv Class 110 kv BIL Completed Splice UniShield Wire Shielded Longitudinally
More informationSTRAIGHT BLADE PLUGS & CONNECTORS
STRAIGHT BLADE PLUGS & CONNECTORS Quick-thread assembly screws and cord-grip screws come backed-out, ready-to-wire. See-through, thermoplastic terminal chamber for clear view of terminals and wire connections.
More informationCastle Model TSM-35. Heavy Duty Screw Pocket Machine. For Models with Serial Number and Above Items Included with Machine
Castle Model TSM-35 Heavy Duty Screw Pocket Machine For Models with Serial Number 63658 and Above Items Included with Machine Part No. Description Qty B02964 9/64" Castle Premium Brad Point Drill Bit w/
More informationDISTRIBUTION CONNECTORS
SECTION ANDERSON VERSA-CRIMP BATTERY POWERED ACSR CUTTING Model VCACSRCCBP is used to cut ACSR, aluminum, and copper conductors up to 1.50". Cuts standard guy wire and ground rod sizes up to 5/8". This
More informationREFILL STATION REBUILD KIT P/N 14270NOS
REFILL STATION REBUILD KIT P/N 14270NOS INSTRUCTION SHEET P/N 199R10338 1.0 DISASSEMBLY This procedure describes the removal of the air module from the fluid module and complete disassembly of the pump.
More informationTube Remover and Installer. and Installer Used for servicing Ford systems produced after Screen Extractor. Ford Aerostar Expansion
gauges A/C FLUSH KIT Easy-to-use system removes refrigerant oil, moisture contaminants from system components lines during retrofitting compressor replacement. Kit includes rubber-tipped flush gun, canister
More informationWire Termination Tools and Installation Kits Recommended Tools
Recommended Tools The Shure-Stake mechanism on mechanical ratchet tools and power tools prevents the dies from releasing the terminal until the proper compression has been completed. With this method,
More informationCall for Pricing
Brass Hex Extension Elbows Pipe A Positive Socket Wrench Installation 1-piece Construction Ensures Positive Alignment and Complete Removal Easy Length Adjustment with Adjustable Threads Custom Elbows are
More informationcopper stud. If a 900 A rating is desired, specify a C as the 8th digit when determining your part number (See Table 3, page 3.)
Molded Rub ber Products 600 A 35 kv Class Separable Splices Electrical Ap pa ra tus 700-31 General Cooper Power Systems 600 A, 35 kv Class Deadbreak Separable Splices are used to splice two, three or four
More informationMedium Voltage Cable. marmonutility.com
Medium Voltage marmonutility.com Table Contents Introduction... 2 Hendrix Product Information... 4 Distribution s (URD) 15kV...6 25kV... 10 35kV...12 28kV...14 Electrical Data...16 Kerite Product Information...
More information600 A 25 kv class BT-TAP deadbreak connector
Deadbreak Connectors Catalog Data CA650001EN Supersedes January 2015 600 A 25 kv class BT-TAP deadbreak connector COOPER POWER SERIES General Eaton terminates high-voltage underground cable to transformers,
More information6280 PART NUMBERS & DIAGRAMS
EXTERNAL PARTS 112 73330 111-2D 73313 73315 6280HD-146 136 230 73242 73205 73213 162 206 207 73245 179 73020 168 178 206 73228 73221 241 73221 6280-110 Wheel Spacer (Not Shown) 6280-111-2D Wheel with Hub
More informationOverhead Products. Overhead Products Introduction. Model Q Lasher. Eagle Lasher Series Series
Introduction In 2006, DCD Design took on the Spinning Equipment Company and began producing the Lineman and Eagle cable lashers. In doing so, DCD took on a long history of quality and innovation. These
More informationPRESS TOOLS PRODUCT CATALOG
PRESS TOOLS PRODUCT PERfoRMAnCE UnDER PRESSURE Since we introduced press tools to America over a decade ago, we haven t stopped working. Today, we manufacture the most proven press tools in the industry,
More informationAMPLIFIER A OR B SELECTOR
M O D E L ABA-1D ABA-1D AMPLIFIER A OR B SELECTOR NILES INSTALLATION & OPERATION GUIDE ABA-1D Speaker/Amplifier Selector S P E A K E R / A M P L I F I E R S E L E C T O R TABLE OF CONTENTS Introduction
More informationHigh Voltage Copper, Smooth Aluminum Shield/Sheath
High Voltage Copper, Smooth Aluminum Shield/Sheath XLPE Insulation, HDPE Jacket, 69 kv - 138 kv Features True triple vertical extrusion system for optimum insulation concentricity, and excellent electric
More informationTC-XHHW-2 Copper, XLPE Insulated, PVC Jacketed
TC-XHHW-2 Copper, XLPE Insulated, PVC Jacketed ER; SR; PR; Dir Bur; 600 V Features UL Listed as TC-ER - exposed run tray cable. Jacket is rated Sunlight Resistance, Oil Resistance I and Direct Burial.
More informationRejuvenation Instructions
Rejuvenation Instructions #541 200A Live-Front Terminations UPR This NRI covers the following: How to prepare 200amp live-front terminations for injection. How to install the two approved live-front termination
More informationCASS Interface System Parts Section 1
Ver. 2.7 CASS USER S MANUAL Receiver CASS Interface System Parts Section 1 VPC P/N CASS P/N Description 310 115 101 1899AS265-01 CASS Receiver Interface, accepts 19 Modules Interface Device VPC P/N CASS
More informationManufacturing & Service: Bierer & Associates Inc. Patent No. 6,885,180. ST Series Service Tester Phase Identifier Operating Instructions ST500PGN
Manufacturing & Service: Bierer & Associates Inc. Patent No. 6,885,180 ST Series Service Tester Phase Identifier Operating Instructions ST500PGN REV. ED. 101229 CONTENTS Limitation of Warranty and Liability
More informationLCT Shielded Primary UD EPR LCT Shielded Primary UD EPR Cable
ed Primary UD EPR ed Primary UD EPR Cable Aluminum or Copper Conductor. EPR Insulation. Copper Longitudinal Corrugated Tape (). Low Density Polyethylene Jacket. APPLICATIONS Predominantly used for primary
More informationC Power Connection Kit
1548-4000C Power Connection Kit For use with Dekoron 2700 Family of Heating Cables Installation Instructions Kit Description The Dekoron 1548-4000C electrical connection kit distirbuted by Heat-Line is
More informationELB ELB
ELB-35-600 ELB-35-610 600A T-Body Elbow Connectors for Copper Tape (CT), Jacketed Concentric Neutral (JCN), and Concentric Neutral (CN) cables up to 35kV class Safety Instructions When installing electrical
More informationPhone: Fax:
REC-Line 20 Fax: 800-345-3767 REC-558U ROBO*CRIMP TM 6 Ton Compression Tool with 1.8 Jaw Opening Accepts W, O and X Type Dies See Page 64 for Available Huskie Dies 6 Ton 8 lbs. with Battery 13 L x 12 H
More informationSTORAGE & MATERIAL HANDLING
www.greenlee.com STORAGE & MATERIAL HANDLING Contractors the world over rely on Greenlee storage and material handling solutions to keep product safe. From small chests to large field offices, and now
More informationThe MATHEY Pneumatic or Hydraulic Powered CGM-1
CGM-1 COLD CUTTING & BEVELING MACHINE in Pneumatic and Hydraulic versions Approved CGM-1 A Pneumatic Driven Part No.: 05.5500.559 CGM-1 O Hydraulic Driven Part No.: 05.5500.560 The CGM Cold Cutting and
More informationSTUD WELDING EQUIPMENT & ACCESSORIES CATALOG
STUD WELDING EQUIPMENT & ACCESSORIES CATALOG WWW.PROWELDINTERNATIONAL.COM 129 COMMERCE DR LAGRANGE, OH. 44050 PHONE: (440)-355-6064 FAX: (440)-355-6474 07/01/02 CD WELDING SYSTEMS PART # LIST PRICE CD-212
More information600 A 35 kv class separable splices
Splices Catalog Data CA650050EN Supersedes 700-31 March 2009 COOPER POWER SERIES General Eaton s Cooper Power series 600 A, 35 kv Class deadbreak separable splices are used to splice two, three or four
More informationProduct Number
Sealing and Grounding Cold Shrink cable accessory sealing kits are designed to seal the end of JCN cable. Use these kits when installing elbows or other cable accessories that do not include a jacket seal.
More informationLineman Buckets & Accessories
Lineman Buckets & Accessories Klein lineman buckets and accessories have been trusted and recognized for decades for their durability and dependability and are built for strength and to handle professional
More informationCordless Systems. Cordless Systems. Hilti. Outperform. Outlast. Cordless. Systems
Hilti. Outperform. Outlast. 49 Introduction Introduction Page 51-52 Drill drivers compact drill driver SFC 22-A Page 53 hammer drill driver SFH 22-A Page 54 Accessories for drill drivers Page 57 Impact
More informationCordless Systems. Cordless Systems. Hilti. Outperform. Outlast.
Cordless Systems Hilti. Outperform. Outlast. 52 Introduction Introduction Page 54-55 Drill drivers Cordless compact drill driver SFC 22-A Page 56 Cordless hammer drill driver SFH 22-A Page 57 Accessories
More informationCall Toll Free GO ALTEC
presents A.B. Chance Call Toll Free 9002-00013 09/05 A. B. CHANCE Company Mechanical Hoists...........................................................p 3 Powered Hoists...........................................................p
More informationB3 Bypass Step by Step Installation Guide
B3 Bypass Step by Step Installation Guide 1 2 3 4 5 6 5 Step 1: Review the parts within the box. You should have: 1) B3 Bypass breaker 2) Bag containing 1 split-lug cover and 2 split-lug tops 3) Bag containing
More information1500 kva Padmount Transformer delta Primary Voltage 208Y/120 Secondary Voltage
1500 kva Padmount Transformer 12470 delta Primary Voltage 208Y/120 Secondary Voltage Cooper Power Systems Proposal Number: BED1096719 Date: January 4, 2010 Revision 00 Item Number: 00001 Item Details Customer
More informationFIXTURE INSTALLATION GUIDE Model T21T (Low Voltage Pendant Set 120V)
FIXTURE INSTALLATION GUIDE Model T21T (Low Voltage Pendant Set 120V) 21T, Rev.4 6-13 IMPORTANT: Before proceeding, retrieve the GLASS SHADE INSTALLATION GUIDE, which is included with the pendant cord set
More informationWiring Assembly Instructions Section 5 P/N CASS P/N 1899AS RG316 P/N CASS P/N 1899AS RG316
Ver. 2.7 CASS USER S MANUAL VPC Tools Required For the assembly of the Mini-Coaxial Contact(s) VPC P/N 610 103 115/CASS P/N 1899AS284-01 and/or P/N 610 103 159/1899AS284-04 the following parts are required
More informationCONNECTORS - SINGLE POLE
CONNECTORS - SINGLE POLE CROCODILE CLIPS DAVID USE PHOTO SD0010 TERMINAL POSTS SOLDER TAGS CRIMP CONNECTORS CRIMPING TOOLS DAVID USE PHOTO SD0010 BOOTLACE FERRULES 2127 CABLE SPLICES 2128 CRIMP CONNECTORS
More information600 A 15 kv class T-OP II deadbreak connector
Deadbreak Apparatus Connectors CA650017EN Supersedes 600-12 February 2010 COOPER POWER SERIES 600 A 15 kv class T-OP II deadbreak connector General Eaton terminates high-voltage underground cable to transformers,
More informationTermination Products. Installing Kits. Recommended Tools. Plier-Type Tools Used for installation of various Sta-Kon terminal series
Installing Kits Recommended Tools The Shure-Stake mechanism on mechanical ratchet tools and power tools prevents the dies from releasing the terminal until the proper compression has been completed. With
More informationMaster Sets with Foam Tray Organizers
Master Sets with Foam Tray Organizers D096005-FT1T 1/2" Drive SAE Impact Sockets 6 Point Standard Sockets: 3/8" - 1-1/2" - 6 Point Deep Sockets: 3/8" - 1-1/2" Foam Tray Organizer: 21-3/4" (w) x 15" (d)
More informationSTABILOY BRAND FeeDeR SOLuTIONS
STABILOY BRAND Feeder Solutions DATA CENTER Introduction General Cable understands that data centers depend heavily on a steady, reliable and scalable source of power. That is why our STABILOY Brand aluminum
More information$4.99 $26.99 $19.99 $25.99 $7.99 $10.99 $12.99 $15.99 $17.99 $ Rubber Mallet-Hickory Handle. Dead Blow Hammer-Fiberglass Handle
Two or three jaws design for Spring-loaded jaws for quick and easy one person set-up for different applications Heavy duty forcing screw with live center for strong even pulls Spread range from 3 to 7
More informationInstallation Instructions K656CY, K656CH and K656I Deadbreak Receptacles
Installation Instructions K656CY, K656CH and K656I Deadbreak Receptacles IS---K656CY,CH,I Page 1 of 6 CONTENTS: Receptacle housings, Cable adapters, I, Wye or H Center sections, Aluminum holding collars,
More informationSolinst Water Level Meter Model 101
For measuring the depth to water in wells, boreholes, standpipes, and tanks, Model 101 Water Level Meters are the industry standard for portable hand operated meters. They are sturdy, easy to use and read
More informationPROFESSIONAL MODULAR CRIMPS, STRIPS & CUTS TOOL
PROFESSIONAL MODULAR CRIMPS, STRIPS & CUTS TOOL Tool 200A/200AR design with 10 position punches. For crimping 8P8C plug, please use AMP 8p8c plug with 2 extra cavities on each side as Fig. 1. Tool 2008A/2008AR
More informationCastle Model TSM-21 Standard Screw Pocket Machine
Castle Model TSM-21 Standard Screw Pocket Machine "For Models with Serial Number 62481 and Above" Items Included with Machine Part No. Description Qty B00964 Castle 9/64 Cobalt Drill Bit w 1/4" Shank 1
More informationAlways Moving Forward. Operating Manual. Please Read Before Operating Unit. Models D1, DV1, D9 Wire Strippers & Braid Combers
Always Moving Forward Operating Manual Please Read Before Operating Unit D9 Twin Wheel Offset Stripper Models D1, DV1, D9 Wire Strippers & Braid Combers The Eraser Company, Inc. PO Box 4961/ Oliva Drive
More informationBe sure to read and completely understand this procedure before applying product. Be sure to select the proper PREFORMED product before application.
5 NOVEMBER 2010 COYOTE Dome 9.5 x 28 Be sure to read and completely understand this procedure before applying product. Be sure to select the proper PREFORMED product before application. 1. 7. 2. 4. 10.
More informationMICHIGAN S ONLY AUTHORIZED WARRANTY SERVICE CENTER. Industrial Equipment Rental & Service
MICHIGAN S ONLY AUTHORIZED WARRANTY SERVICE CENTER Industrial Equipment Rental & Service Our sales, repair, and customer service teams received extensive training from Greenlee for the full line of products
More informationPower TOOLS. Power Threading Machine / Model 535. Power Threading / Model Model 300 Compact Threading Machine
Power Threading Machine / Model Pipe: - 2 (mm - 0mm), 2 / 2-4 (62mm - 00mm). 4-6 (00mm - 0mm) with 4 and 6 Rod: - 2 (6mm - 0mm) Motor: / 2 HP, Single-phase, 20V or V, 2-60Hz, Reversible Universal motor.
More information