Think Automation and beyond... IDEC Safety Interlock Switches

Transcription

1 Think Automation and beyond... IDEC Safety Interlock Switches This document provided by Barr-Thorp Electric Co., Inc

2 IDEC Safety Components Providing reliable, human-machine safety components As increasingly more complex tasks are taken over by machines, it has become common for people and machines to interact closely on a daily basis. In these human-machine interactions, it is critical that safety components are used as a countermeasure to avoid injuries. As machine safeguarding continues to evolve both in products and regulations, IDEC Corporation has created a family of safety components to meet industry demands and needs. With six decades of experience in industrial automation, IDEC continues to produce the same high-quality and globally-recognized products that can be relied upon for machine safety control throughout the world. To us, safety isn t just about meeting safety requirements; it s about protecting people and productivity. This document provided by Barr-Thorp Electric Co., Inc

3 Interlock Switches IDEC Safety Interlock Switch Family Compact, High-Quality Designs Often used for gate and door monitoring or locking, IDEC safety interlock switches are created with a high-quality and compact design aimed at achieving the ultimate goal of maximum personnel safety. When installed correctly in a safety circuit, IDEC HS safety switches ensure that doors, gates and guards are closed before a process or machine can start up. When the gate or door is opened, the actuating key is removed from the switch thus signaling a safety logic device. Safety Made Simple Simple to install, HS safety interlock switches feature metal or plastic heads or bodies of different shapes, sizes and connection methods to cover most safeguarding applications, while complying with both domestic and European safety standards. For some international standards, such as EN088, applications can only use proprietary actuators to prevent tampering of the gate or door. HS switches are perfect for this, as they meet or exceed all standards. Variety to Choose From Available in a variety of sizes, contact arrangements and functions, IDEC HS safety interlock switches can be used in a wide-range of safety system applications from machine tools and semiconductor equipment to packaging and material handling equipment IDEC This document provided by Barr-Thorp Electric Co., Inc

4 Selection IDEC has a variety of gate/door switches to meet all your needs! Basic Safety Interlock Switches Subminiature - HS6B Miniature - HSD Full Size - HSB 0 x x 78mm or contacts Integrated cable Plastic body 0 x 0 x 90mm or contacts Screw termination Metal or plastic head (page (page 6 (page 7 x x m contacts Screw termination Die-cast aluminum body Solenoid Locking Safety Interlock Switches Subminiature - HS6E Miniature - HSE Full Size - HSE Full Size - HSC Full Size- HSL 7 x x 7m 00N contacts Integrated cable Plastic body x 0 x 6mm 00N contacts Integrated cable Metal head, plastic body 0 x x 9mm 00N - contacts Screw termination Plastic body 06 x x m 00N - contacts Screw termination Die-cast aluminum body (page 8 (page 0 (page (page 6 (page 0 x x 9mm 000N 6 contacts Screw termination Plastic body This document provided by Barr-Thorp Electric Co., Inc

5 Subminiature HS6B HS6B features: Only 78 x 0 x m Two actuator entrances provide flexibility for installation options Integral molded cable reduces wiring time IP67 (IEC609 Direct Opening Action Actuators comply with ISO9 and EN088 Part Numbers Contact Configuration NC-NO Zb NC Zb NC-NO Zb NC Zb Standard stock items in bold. Actuator Keys Cable Length Part Number HS6B-B0 HS6B-B0 HS6B-B0 HS6B-0B0 HS6B-0B0 HS6B-0B0 HS6B-B0 HS6B-B0 HS6B-B0 HS6B-0B0 HS6B-0B0 HS6B-0B0 Appearance Part Number Shape HS9Z-A6 Straight Specifications Conforming to Standards EN088, IEC6097--, EN6097--, GS-ET-, IEC6066-, IEC600-, EN600-, UL08, CSA C. No. Operating Temperature to +70 C (no freezing Storage Temperature 0 to +80 C (no freezing Relative Humidity to 8% (no condensation Storage Humidity 9% maximum (no condensation Rated Insulation Voltage (U i 00V Degree of Protection IP67 (IEC609 Direct Opening Travel 8mm minimum Direct Opening Force 60N minimum Thermal Current (I th.a Rated Voltage (U e 0V V 0V Resistive load (-.A.A Inductive load (-.A 0.7A Rated Operating.A.A 0.A Current (I e Resistive load (DC- (A (0.A (0.A DC. 0.A 0.7A Inductive load (DC- (A (0.A (0.A Operating Frequency 00 operations/hour Mechanical Life,000,000 operations (GS-ET- Electrical Life 00,000 operations (at full rated load Weight 0g - cable type, 70g - cable type, 0g - cable type HS9Z-A6 Right-angle Dimensions (mm 0. R. (8 HS9Z-A6 Adjustable actuator 90 angle 0. Slot Plug (Note (supplied (9 HS9Z-A66 Adjustable actuator 80 angle (ø7.6 Actuators are not included and must be ordered separately. This document provided by Barr-Thorp Electric Co., Inc

6 Miniature HSD HSD features: Detects detachment of head for enhanced safety Compact dimensions with up to three contacts The head orientation can be rotated, allowing 8 different actuator entries NC contacts with direct opening action (IEC/EN M terminal screws for easy wiring Gold-plated contacts suitable for small loads Part Numbers Contact Configuration NC-NO Main Monitor NC Main Monitor NC-NO Main Main Monitor NC Zb Zb Zb Zb Main Main Monitor Standard stock items in bold. Gland Port Size Actuator Keys & Accessories Item Part Number Description HS9Z-A HS9Z-AA HS9Z-A Plastic Head Type Metal Head Type G/ HSD-RN HSD-ZRN PG. HSD-RNP HSD-ZRNP M0 HSD-RNM HSD-ZRNM G/ HSD-0RN HSD-0ZRN PG. HSD-0RNP HSD-0ZRNP M0 HSD-0RNM HSD-0ZRNM G/ HSD-RN HSD-ZRN PG. HSD-RNP HSD-ZRNP M0 HSD-RNM HSD-ZRNM G/ HSD-0RN HSD-0ZRN PG. HSD-0RNP HSD-0ZRNP M0 HSD-0RNM HSD-0ZRNM Straight Straight w/rubber bushings Right-angle Specifications Conforming to Standards Operating Temperature Storage Temperature Relative Humidity Rated Insulation Voltage (U i Degree of Protection Actuator Operating Speed Direct Opening Travel Direct Opening Force Thermal Current (I th Rated Current (I e * Minimum Applicable Load (reference Operating Frequency Mechanical Life Electrical Life Weight (approx. *TÜV rating: - /0V, DC- A/0V ISO9, EN088, IEC6097--, EN (TÜV approval, GS-ET- (TÜV approval, UL08, CSA C. No., GB08. (CCC approval, IEC600-/EN600- (applicable standards for use 0 to +70 C (no freezing 0 to +80 C (no freezing to 8% (no condensation 00V IP67 (IEC to.0m/s 0mm minimum 0N minimum 0A Rated Voltage (U e 0V V 0V Resistive load (- 0A 0A 6A Inductive Load (- 0A A Resistive load (DC- 8A.A.A DC Inductive Load (DC- A.A 0.6A V /DC, A (Applicable range may vary with operating conditions and load types. 900 operations per hour,000,000 operations minimum (GS-ET- 00,000 operations minimum (- 0V, 6A,000,000 operations minimum (V /DC,00mA (operation frequency: 900 operations per hour Plastic head: 80g, Metal head: 0g HS9Z-AA Right-angle w/rubber bushings Dimensions (mm R. Gland Port HS9Z-A HS9Z-AP Angle Adjustable (vertical/horizontal Plug Actuator HS9Z-SH Sliding Actuator 0 HS9Z-PH Padlock Hasp 6 Actuators are not included and must be ordered separately. This document provided by Barr-Thorp Electric Co., Inc

7 Full Size HSB HSB features: Rugged aluminum die-cast housing Direct Opening Action Available with or without an indicator (red or green Flexible Installation: Two actuator entries and three conduit ports are provided Select from two circuit configurations (NO-NC or NC. IP67 Part Numbers Model Main Main Auxiliary Auxiliary Standard stock items in bold. Actuator Keys & Accessories Contact Configuration NC-NO NC Pilot Light Without LED LED Without LED LED Appearance Part Number Description HS9Z-A HS9Z-A HS9Z-A Straight Actuator (Mainly for sliding doors Right-angle Actuator (Mainly for rotating doors Adjustable Actuator Part Number HSB-R HSB-R-R HSB-R-G HSB-0R HSB-0R-R HSB-0R-G Specifications Conforming to Standards IEC6097--, EN6097--, GS-ET-, UL08, CSA C. No. Operating Temperature 0 to +70 C (no freezing Storage Temperature 0 to +80 C Relative Humidity to 8% (no condensation Rated Insulation Voltage (U i 00V (between LED and ground: 60V Degree of Protection IP67 (IEC609 Actuator Operating Speed 0.0 to.0m/s Direct Opening Travel m minimum Direct Opening Force 0N minimum Thermal Current (I th 0A Rated Voltage (U e 0V V 0V Rated Operating Current (I e Operating Frequency Mechanical Life Electrical Life Recommended Short Protection Operating Voltage Current Light Source Lens Color Weight (approx Resistive load (- Inductive load (- Resistive load (DC- DC Inductive load (DC- 900 operations/hour,000,000 operations 0A 0A 8A A 0A A.A.A 00,000 operations (rated load 0V, 0A fuse (Type D0 based on IEC6069-, V DC 0mA LED lamp or (mm dia. Lens 80g 6A.A 0.6A HS9Z-T Key Wrench (included with switch Dimensions (mm 6. 0 R.7 ø. Conduit Port G/ HS9Z-P Conduit Opening Plug 6 Actuators are not included and must be ordered separately IDEC 7. ±.0 9. This document provided by Barr-Thorp Electric Co., Inc

8 Subminiature HS6E features: Compact body: 7 7m m wide, thinnest solenoid interlock switch in the world Reversible mounting and angled cable allow four actuator insertion directions Energy saving: V DC, 0mA (solenoid: 00mA, LED: 0mA Manual unlocking possible on three sides LED indicator shows solenoid operation 00N locking retention force Part Numbers Mechanical Spring Lock (power solenoid to unlock Contact Configuration Cable Length Part Number (Actuator inserted (Solenoid OFF (+ ( A A Solenoid Lock (remove power to solenoid to unlock Contact Configuration Cable Length Part Number (Actuator inserted (Solenoid ON (+ ( A A HS6E-LB0-G HS6E-LB0-G HS6E-LB0-G HS6E-L7YB0-G HS6E-L7YB0-G HS6E-L7YB0-G HS6E-MB0-G HS6E-MB0-G HS6E-MB0-G HS6E-M7YB0-G HS6E-M7YB0-G HS6E-M7YB0-G HS6E-NB0-G HS6E-NB0-G HS6E-NB0-G HS6E-N7YB0-G HS6E-N7YB0-G HS6E-N7YB0-G HS6E-PB0-G HS6E-PB0-G HS6E-PB0-G HS6E-P7YB0-G HS6E-P7YB0-G HS6E-P7YB0-G. Contact configuration shows the contact status when actuator is inserted and solenoid off for spring lock.. Contact configuration shows the contact status when actuator is inserted and solenoid on for solenoid lock.. LED color is green.. Actuator keys are not supplied with the interlock switch and must be ordered separately.. Standard stock items in bold IDEC 8 This document provided by Barr-Thorp Electric Co., Inc

9 HS6E Actuator Keys & Accessories Item Part Number Description HS9Z-A6 HS9Z-A6 HS9Z-A6S HS9Z-A6 HS9Z-A66 HS9Z-T Straight Right-angle (actuator retention force 00N max Right-angle with Mounting Plate Angle adjustable with hex screw (horizontal or vertical configurable Angle Adjustable (horizontal or vertical configurable Manual Unlock Key (long type - metal. Actuators are not included and must be ordered separately.. Plastic Manual Unlock Key supplied with each unit Specifications UL 08, CSA C., No., ISO 9, IEC , EN Conforming to Standards (TÜV approval, EN 088 (TÜV approval, GS-ET-9, IEC 600-/EN 600- (applicable standards for use Operating Temperature to +0 C (no freezing Storage Temperature 0 to +80 C (no freezing Relative Humidity to 8% (no condensation Rated Insulation Voltage (U i 00V (door monitor contact, 0V (lock monitor contact, 0V (between LED or solenoid and ground Electric Shock Protection Class Class II (IEC 60 Degree of Protection IP67 (IEC 609 Actuator Operating Speed 0.0 to.0m/s Direct Opening Travel 8.0mm minimum Direct Opening Force 60N minimum Thermal Current (I th Rated Operating Current (I e Main & Lock Monitor Door Monitor Minimum Applicable Load (reference Actuator Retention Force Operating Frequency Mechanical Life Electrical Life Cable Cable Diameter Weight Operating temperature ( to ºC Operating temperature ( to 0ºC.A (up to circuits.0a ( or more circuits.0a ( circuit 0.A ( or more circuits Rated Voltage (U e 0V V 0V DC DC Resistive load (- Inductive load (- Resistive load (DC- Inductive load (DC- Resistive load (- Inductive load (- Resistive load (DC- Inductive load (DC- V /DC, ma A A.A. A A 0.A 0.A.A.A.A 0.A.A 0.7A 0.A 0.7A 00N maximum (GS-ET operations/hour,000,000 operations minimum (GS-ET-9 00,000 operations minimum (rated load,000,000 operations minimum (V /DC, 00mA (operating frequency 900 operations/hr UL6, No. AWG (-core: 0.m or equivalent/core ø7.6mm 0g - cable type, 0g - cable type, 600g - cable type. UL, c-ul rating: Main/Lock monitor circuit: V, A Pilot duty, V DC, 0.A Pilot duty Door monitor circuit:0v, 0.7A Pilot duty0v DC, 0.7A Pilot duty. TÜV rating: Main/Lock monitor circuit: - V/A, DC- V/0.A Door monitor circuit: - 0V/0.7A, DC- 0V/0.7A Dimensions (mm ø (. ( (. C R. Manual Unlocking Key 0 This document provided by Barr-Thorp Electric Co., Inc

10 Miniature HSE features: World s smallest contact solenoid interlock switch ( x 0 x 6mm Flexible installation - the head can rotate, allowing 8 different actuator entries Metal actuator entry slot ensures long life Actuator locking strength is 00N minimum (GS-ET-9 LED pilot light indicates the solenoid status IP67 (IEC609 Part Numbers Mechanical Spring Lock (power solenoid to unlock Contact Arrangement Door Monitor Lock Monitor (Actuator inserted (Solenoid OFF (+ ( A A Pilot Light No No No Cable Length Part Number HSE-A00 HSE-A00 HSE-A00 HSE-A0-G HSE-A0-G HSE-A0-G HSE-B00 HSE-B00 HSE-B00 HSE-B0-G HSE-B0-G HSE-B0-G HSE-D00 HSE-D00 HSE-D00 HSE-D0-G HSE-D0-G HSE-D0-G HSE-VA0-G HSE-VA0-G HSE-VA0-G Solenoid Lock (remove power to solenoid to unlock Contact Arrangement Door Monitor (Actuator inserted Lock Monitor (Solenoid ON (+ ( A A Pilot Light No No No Cable Length Part Number HSE-A7Y00 HSE-A7Y00 HSE-A7Y00 HSE-A7Y0-G HSE-A7Y0-G HSE-A7Y0-G HSE-B7Y00 HSE-B7Y00 HSE-B7Y00 HSE-B7Y0-G HSE-B7Y0-G HSE-B7Y0-G HSE-D7Y00 HSE-D7Y00 HSE-D7Y00 HSE-D7Y0-G HSE-D7Y0-G HSE-D7Y0-G HSE-VA7Y0-G HSE-VA7Y0-G HSE-VA7Y0-G HSE-VD0-G HSE-VD0-G HSE-VD0-G HSE-VD7Y0-G HSE-VD7Y0-G HSE-VD7Y0-G HSE-DD0-G HSE-DD0-G HSE-DD0-G HSE-AL0-G HSE-AL0-G HSE-AL0-G HSE-DL0-G HSE-DL0-G HSE-DL0-G Rear Button Unlock Type. Contact configuration shows the contact status when actuator is inserted and solenoid off for spring lock.. Contact configuration shows the contact status when actuator is inserted and solenoid on for solenoid lock.. Main circuit has door and lock monitor contacts wired in series internally.. Standard stock items in bold. 0 This document provided by Barr-Thorp Electric Co., Inc

11 HSE Actuator Keys & Accessories Item Part Number HS9Z-A HS9Z-A HS9Z-A HS9Z-A HS9Z-AP HS9Z-PH HS9Z- SP HS9Z-T HS9Z-SH Straight Description Right-angle Angle adjustable vertical operation Angle adjustable horizontal/vertical operation Note Plug Actuator (allows switch to be used as interlock plug unit Padlock Hasp (prevents unauthorized insertion of actuator Mounting Plate (allows easy mounting to aluminum frames Manual unlock key (long type - metal Sliding Actuator. The actuator tensile strength is 00N minimum.. Actuators are not included and must be ordered separately. Dimensions (mm.9. R. Specifications ISO9, IEC6097--, EN (TÜV approval, EN088, GS-ET-9 Conforming to Standards (BG approval, UL08, CSA C., No., GB 08. (CCC approval IEC600-/EN600- Operating Temperature to 0 C (no freezing Relative Humidity to 8% (no condensation Rated Insulation Voltage (U i Note 0V (between LED, solenoid and grounding: 0V Storage Temperature 0 to +80 C (no freezing Actuator Operating Speed 0.0 to.0m/s Direct Opening Travel Actuator HS9Z-A: m minimum Actuator HS9Z-A/A/A: mm minimum Direct Opening Force 80N minimum Thermal Current (I th.a Rated Voltage (U e 0V V 0V Rated Operating Current (I e Note Minimum Applicable Load (reference Actuator Retention Force Operating Frequency Mechanical Life Electrical Life Cable Cable Diameter Rated Voltage Solenoid Current Rated Voltage Pilot Light Current Weight (approx. Resistive load (- A A Inductive Load (- A 0.A DC Resistive load (DC- A 0.A 0.A Inductive Load (DC- A 0.A 0.A V /DC, A. UL rating: V. TUV, BG rating: -, 0.A/0V, DC-, 0.A/V UL, c-ul rating: Pilot duty 0.A/V, Pilot duty DC 0.A/V 00N minimum (GS-ET operations per hour,000,000 operations minimum (GS-ET-9 00,000 operations minimum (operating frequency 900 operations per hour, rated load -, 0V, A UL6, No. AWG - 8-core: 0.m or equivalent/core (HSE-V types: No. AWG - -core :0.m on equivalent/ core ø7.6mm V DC (00% duty cycle 66mA (initial value V DC 0mA 00g - cable type, 80g - cable type, 760g - cable type ( IDEC This document provided by Barr-Thorp Electric Co., Inc

12 Full Size HSE features: Plastic Housing: Lightweight 00N locking retention force Available with a red or green indicator Choose from circuit configurations Flexible Installation: The actuator can be accessed from two directions Ease of Wiring: M. termination screws Part Numbers (Mechanical Spring Lock only Contact Configuration LED Standard Manual Unlock Key Monitor None HSE-0R HSE-0KR Main circuit: NC + NC NO/NO Main Solenoid Power 6 7 Contacts are linked to the solenoid mechanically. 8 HSE-R-G HSE-KR-G HSE-R-R HSE-KR-R Monitor None HSE-0R HSE-0KR Main circuit: NC + NC NO Main Solenoid Power 6 7 Contacts are linked to 8 the solenoid mechanically. HSE-R-G HSE-KR-G HSE-R-R HSE-KR-R Monitor None HSE-0R HSE-0KR Main circuit: NC + NC NC + NC Main + Solenoid Power 6 Contacts are linked to 7 the solenoid mechanically. 8 HSE-R-G HSE-KR-G HSE-R-R HSE-KR-R Monitor None HSE-0R HSE-0KR Main circuit: NC + NC NC Main + Solenoid Power 6 Contacts are linked to 7 the solenoid mechanically. 8 HSE-R-G HSE-KR-G HSE-R-R HSE-KR-R. Key wrench for TORX screws (HS9Z-T is supplied with the interlock switch.. Actuator is not supplied with the interlock switch, and must be ordered separately.. TORX is a registered trademark of Camcar Textron. This document provided by Barr-Thorp Electric Co., Inc

13 HSE Actuator Keys & Accessories Item Part Number HS9Z-A HS9Z-A HS9Z-A HS9Z-T HS9Z-P Description Straight Actuator Right-angle Actuator Angle Adjustable Actuator Key Wrench (included with switch Conduit Opening Plug (G/ Actuators are not included and must be ordered separately. Dimensions (mm 0 Note: Plug the unused actuator entry slot using the slot plug supplied with the interlock switch Specifications EN088, IEC6097--, EN6097--(TUV, ISO9, GS-ET-9 Conforming to Standards (BG, UL08, CSA C. No., GB08. (CCC approval, IEC600-, EN600- (applicable standards for use Operating Temperature 0 to +0 C (no freezing Storage Temperature 0 to +80 C Relative Humidity to 8% (no condensation Electric Shock Protection Class II (according to IEC60 Degree of Protection IP67 (IEC609 Vibration Operating Extremes 0 to Hz (amplitude 0. Resistance Damage Limits 0Hz (amplitude. Shock Resistance,000m/sec (approx. 00G Actuator Retention Force,00N minimum (per GS-ET-9 Actuator Operating Speed 0.0 to.0m/s Direct Opening Travel m minimum Direct Opening Force 0N minimum Thermal Current (I th Main circuit: 0A, Auxiliary circuit: Rated Voltage (U e 0V V 0V Rated Operating Current (I e Operating Frequency Mechanical Life Electrical Life Operating Voltage Current Coil Resistance Solenoid Pickup Voltage Unit Drop Out Voltage Allowable Voltage Insulation Class Operating Voltage Current Light Source Lens Color Weight (approx Main Auxiliary DC DC Resistive load (- Inductive load (- Resistive load (DC- Inductive load (DC- Resistive load (- Inductive load (- Resistive load (DC- Inductive load (DC- 0A 0A 6A 900 operations/hour max.,000,000 operations min. (at full rated load 900 ops/hr (-/0V, 6A 00,000 operations (rated load V DC (00% duty cycle 9mA (initial value 0Ω (at 0ºC 0.V maximum (at 0ºC.V minimum (at 0ºC 6.V max (continuous Class F V DC 0mA LED lamp or 00g 0A A 0.9A 0.9A 6A IDEC This document provided by Barr-Thorp Electric Co., Inc

14 Full Size HSL features:,000n locking retention force LED indicator Energy-efficient solenoid 6 contacts with easy-to-wire terminations M terminal screws for easy wiring Part Numbers ( X LED Main circuit: Main circuit: Main circuit: Main circuit: Main circuit: Mechanical Spring Lock (power solenoid to unlock Contact Configuration ( X Door Monitor (Actuator Inserted Lock Monitor (Solenoid OFF ( ( A A Conduit LED Size G/ PG. M0 G/ PG. M0 G/ PG. M0 Part Number HSL-RKMSR-R HSL-RKMSR-G HSL-RKMSRP-R HSL-RKMSRP-G HSL-RKMSRM-R HSL-RKMSRM-G HSL-DQKMSR-R HSL-DQKMSR-G HSL-DQKMSRP-R HSL-DQKMSRP-G HSL-DQKMSRM-R HSL-DQKMSRM-G HSL-DTKMSR-R HSL-DTKMSR-G HSL-DTKMSRP-R HSL-DTKMSRP-G HSL-DTKMSRM-R HSL-DTKMSRM-G ( X LED Solenoid Lock (remove power to solenoid to unlock Contact Configuration ( X Main circuit: Main circuit: Main circuit: Main circuit: Main circuit:. Contact configuration shows the contact status when actuator is inserted and solenoid off for spring lock.. Contact configuration shows the contact status when actuator is inserted and solenoid on for solenoid lock.. Actuators are not supplied with the interlock switch and must be ordered separately.. Standard stock items in bold. Door Monitor (Actuator Inserted Lock Monitor (Solenoid ON ( ( A A Conduit LED Size G/ PG. M0 G/ PG. M0 G/ PG. M0 Part Number HSL-R7YKMSR-R HSL-R7YKMSR-G HSL-R7YKMSRP-R HSL-R7YKMSRP-G HSL-R7YKMSRM-R HSL-R7YKMSRM-G HSL-DQ7YKMSR-R HSL-DQ7YKMSR-G HSL-DQ7YKMSRP-R HSL-DQ7YKMSRP-G HSL-DQ7YKMSRM-R HSL-DQ7YKMSRM-G HSL-DT7YKMSR-R HSL-DT7YKMSR-G HSL-DT7YKMSRP-R HSL-DT7YKMSRP-G HSL-DT7YKMSRM-R HSL-DT7YKMSRM-G IDEC This document provided by Barr-Thorp Electric Co., Inc

15 HSL Actuator Keys & Accessories Item Part Number Description HS9Z-AS HS9Z-AS HS9Z-AS HS9Z-T HS9Z-P Straight Actuator L-shaped Actuator Angle Adjustable Actuator (vertical operation only Key Wrench (included with switch Conduit Opening Plug (G/ Actuators are not included and must be ordered separately. Dimensions (mm Specifications ISO9, IEC EN (TÜV approval, Conforming to Standards GS-ET-9 (TÜV approval. UL08, CSA C. No. IEC600-/EN600- (applicable standards for use Operating Temperature 0 to + C (no freezing Storage Temperature 0 to +80 C (no freezing Relative Humidity to 8% (no condensation Rated Insulation Voltage (U i 00V Overvoltage Category III Electric Shock Protection Class II (IEC 60 Degree of Protection IP67 (IEC 609 Shock Resistance Damage limits: 000m/s Actuator Retention Force 000N minimum (GS-ET-9 Actuator Operating Speed 0.0 to.0m/s Direct Opening Travel m minimum Direct Opening Force 0N minimum Thermal Current (I th 0A Rated Rated Voltage (U e 0V V 0V Rated Operating Current (I e Operating Frequency Mechanical Life Electrical Life Solenoid Unit Weight (approx. Rated Operating Voltage Rated Current Rated Operating Voltage Rated Current Light Source Illumination Color Resistive Load (- 0A 0A 6A Inductive Load (- 0A A Resistive Load (DC- 8A.A.A DC Inductive Load (DC- A.A 0.6A 900 operations per hour,000,000 operations minimum (GS-ET-9 00,000 operations minimum (- /0V,000,000 operations minimum (V /DC, 00mA (operating frequency 900 operations per hour V DC (00% duty cycle 00mA (initial value V DC 0mA LED (G, (R 0g (HSL-DQ. Minimum applicable load (reference value: V /DC, A (Applicable range may vary with operating conditions and load types.. TÜV rating: - /0V, DC- A/0V UL, c-ul rating: A00, Pilot duty: /0V, Pilot duty: DC A/0V This document provided by Barr-Thorp Electric Co., Inc

16 Full Size HSC features: Rugged aluminum die-cast housing 00N locking retention force Flexible Installation: The actuator can be accessed from two directions Select from four different circuit configurations IP67 Part Numbers (Mechanical Spring Lock Only Contact Configuration LED Part Number NC+NC Auxiliary : NO/NO HSC-RR-G Auxiliary Contact Configuration LED Part Number NC+NC Auxiliary : NC+NC HSC-RR-G Auxiliary + Contacts are linked to the solenoid mechanically Main Solenoid Power HSC-RR-R + 6 Contacts are linked to the solenoid mechanically Main Solenoid Power HSC-RR-R NC+NC Auxiliary : NO Auxiliary HSC-RR-G NC+NC Auxiliary : NC Auxiliary HSC-RR-G + 6 Contacts are linked to the solenoid mechanically Main Solenoid Power HSC-RR-R + 6 Contacts are linked to the solenoid mechanically Main Solenoid Power HSC-RR-R IDEC 6 This document provided by Barr-Thorp Electric Co., Inc

17 HSC Actuator Keys & Accessories Item Part Number Description HS9Z-A HS9Z-A HS9Z-A HS9Z-T HS9Z-P Straight Actuator Right-angle Actuator Adjustable Actuator Key Wrench (included with switch Conduit Opening Plug (G/ Actuators are not included and must be ordered separately. Dimensions (mm. R ø Conduit Port G/ 7 7 ø. 06 Specifications Conforming to Standards EN088, IEC6097--, EN6097--, GS-ET-9, UL08, GB 08. (CCC approval, CSA C. No. Operating Temperature 0 to +0 C (no freezing Storage Temperature 0 to +80 C Relative Humidity 0 to 8% (no condensation Rated Insulation Voltage (U i 00V (between LED or solenoid and ground: 60V Actuator Retention Force,00N minimum Actuator Operating Speed 0.0 to.0m/s Direct Opening Travel m minimum Direct Opening Force 0N minimum Thermal Current (I th Main circuit: 0A, Auxiliary circuit: Rated Voltage (U e 0V V 0V Rated Operating Current (I e 9.7 Main Auxiliary DC DC Resistive load (- Inductive load (- Resistive load (DC- Inductive load (DC- Resistive load (- Inductive load (- Resistive load (DC- Inductive load (DC- 0A 0A 6A 0A A 0.9A 0.9A Operating Frequency 900 operations/hour max. Mechanical Life,000,000 operations Electrical Life 00,000 operations (rated load Recommended Short Protection 0V, 0A fuse (Type D0 based on IEC6069-, Solenoid Unit Operating Voltage V DC (00% duty cycle Current A (initial value Operating Voltage V DC Current 0mA Light Source LED lamp Lens Color or Weight (approx 660g 6A This document provided by Barr-Thorp Electric Co., Inc

18 Additional Safety Products FSA Safety Controllers - Consolidate Multiple Safety Relays to One SmartSafety Relay FSA features: No programming required Easily replaces - safety relay control modules 8 or pre-programmed logic safety circuits Connect with various types of safety inputs Monitor status of safety I/Os and error codes IEC 608 integrity level, ISO 89- performance level e and EN9- safety category compliant When you want a straightforward system that s safe, easy-to-install and won t cost an arm and a leg, an IDEC SafetyOne FSA is the answer! The FSA offers up to pre-programmed logic safety circuits. That means you can configure a system without any programming, just by selecting one logic from either 8 (FSA-C0S or (FSA-CS to configure a safety system. Unlike multiple safety relays, which require lots of cumbersome wiring and take up too much space, the entry-level safety controller makes it easy to consolidate basic safety circuits. At the same time they save space and minimize wiring. FSA SafetyOne can easily replace two to three safety relay control modules with no programming required. Not only that, SafetyOne can be configured simply by flipping dip switches to select a logic. One module can connect with various safety components such as Emergency Stop switches, light curtains, Interlock switches, two hand controls and auxiliary components such as muting lights, sensors and much more. FSA is UL listed, TUV rated and CE marked, as well as meets IEC 608 integrity level, ISO 89- performance level e and EN9- safety category. Replaces more than seven safety relay modules Two-hand Control Emergency Stop Switch FSA-CS Logic A Monitor Output Safety Outputs Interlock Switch Light Curtain (PNP Safety Output Safety Output Monitor signals PLC Two-hand Control Error signals Mode selection Muting function of light curtains Light curtains Hazardous area Muting sensors 7 mm. mm Emergency Stop Switch Light Curtain Enabling Switch Selector Switch FSA-CS Logic 0 Safety Output Safety Output Object Muting lamp Solenoid drive output. mm Interlock Switch Four safety output lines Emergency Stop Switch FSA-CS Logic 0 Safety Input Solenoid drive output Enabling Switch Selector Switch Interlock Switch Safety Output Safety Output - Safety Output - Safety Output 8 This document provided by Barr-Thorp Electric Co., Inc

19 SG Safety Light Curtains - a Quality, Affordable Hazardous Area Access Solution SG Light Curtain features: Integrated light curtain for Finger or Body Protection Operating distance up to 6m or 9m Heights from 0 to 800mm Compact x 7mm profile Sturdy profile and rotating brackets User interface with display Alignment function Hand Protection Presence Protection Finger Protection Hand Protection The SG Type series offers two models, the SG basic and the SG extended. Available functions include Test/Restart, EDM and Anti-interference. With very fast response times, the SG series can be installed right next to a hazardous area improving productivity. The rotating mounting brackets make installation and the alignment of the emitting and receiving units easy, even at long distances and in applications that use mirrors. With mounting brackets that rotate, no connection necessary between emitter and receiver, and configuration that can be accomplished without external control units or supplementary cables, the SG Type light curtains are one of the best available on the market today. In addition, the light curtains can be aligned using the 7 segment display on either the emitter or receiver. Enabling Switches - Ensuring Operator Safety HEB HEB & HE9Z-GSH HEG HE6B HEB HEB HEB Enabling Switch features: Ergonomically-designed OFF-ON-OFF -position operation Employs direct opening action mechanism for ON-OFF operation by pressing tightly Contacts will not turn on when released from OFF (position to OFF (position IEC/EN Compliant Position Position Position Button released Button pressed Button pressed fully Position Operation General Pushbutton Switch (-position OFF ON No position -position Enabling Switch OFF. Press. Press. Release lightly. Release. Press fully ON OFF. Release Terminal Contact Movable Contact IDEC enabling switches are used in numerous pendants and grip switches around the world. Developed using IDEC s fundamental philosophy to provide high reliability in products, our enabling switches provide optimal safety. An enabling switch is a -position (OFF-ON-OFF switch to allow machine operation only when the switch is lightly pressed and held in the middle position (position. Because it disables machine operation when released (position or further depressed (position by a panicked operator, the safety of operators is ensured. When operators use pendants to perform teaching, system changeover and maintenance, they must have protection against unpredictable machine operation. Therefore teaching pendants are equipped with -position enabling switches. This document provided by Barr-Thorp Electric Co., Inc

20 E-Stops Product Information Safety Products Product Support Technical support: For over 60 years, IDEC has manufactured reliable, high-quality Emergency Stop switches and consistently led the market in new technology and innovation for machine operator safety. By surpassing current international standards, IDEC E-Stops are the safest in the world. Find your local IDEC Representative or Distributor: Phone: IDEC RFV Force Guided Relays IDEC Force guided relays are used in safety circuits to detect failures such as contact welding and damage to the contact spring. The contacts of these relays are forced to open and close by a guide connected to the armature. Available in four or six pole models, all relays have 6A rated contacts. RFV can be mounted directly on a printed circuit board or can use DIN RAIL or PCB mount sockets. USA IDEC Corporation Tel: ( opencontact@idec.com Canada IDEC Canada Ltd. Tel: ( sales@ca.idec.com Australia IDEC Australia Pty. Ltd. Tel: sales@au.idec.com Japan IDEC Corporation Tel: products@idec.co.jp United Kingdom IDEC Electronics Ltd. Tel: IDEC@uk.IDEC.com Germany IDEC Elektrotechnik GmbH Tel: service@idec.de Hong Kong IDEC (H.K. Co., Ltd. Tel: info@hk.idec.com China/Beijing IDEC (Beijing Corporation Tel: idec@cn.idec.com China/Shanghai IDEC (Shanghai Corporation Tel: idec@cn.idec.com 00 IDEC Corporation. All Rights Reserved. Catalog No. HS9Y-B00-0 /0 0K Specifications and other descriptions in this catalog are subject to change without notice. China/Shenzhen IDEC (Shenzhen Corporation Tel: Singapore IDEC Asia Pte. Ltd. Tel: info@sg.idec.com Taiwan IDEC Taiwan Corporation Tel: service@tw.idec.com This document provided by Barr-Thorp Electric Co., Inc