100 years success through continuity. CHAMPION forage harvester with row-independent harvesting head

Transcription

1 CHAMPION forage harvester with row-independent harvesting head

2 CHAMPION C 1200 precision forage harvester attachment - row-independent - Front-mounted Side-mounted Rear-mounted A specially designed joint allows the Champion C 1200 to be swivelled into the required working position. Centrally adjustable flywheel with 12 specially profiled blades, for good chop quality, integral blade sharpening device. Belt-driven blade rotor, intake rotor and pre-compression roller ensures optimal harvesting. The cracker grating for optimal kernel processing can easily be exchanged for the smooth plate. Hydraulically rotated ejection chute (140 ), double ejection flap with 12 V servomotor, manually folded. Mechanically folding with gas-filled struts (special equipment).

3 CHAMPION C 2200 precision forage harvester - row-independent - Front-mounted Rear-mounted With pick up 2 m The intake drums with their aggressive teeth ensure the loss-free intake of the crop even under extreme operating conditions. Champion C 2200, reversing transmission for rear linkage and front mounting, for 2 flywheel wheel speeds (860/1160 min-1) for use with grass and maize. Low-maintenance, chainless drives on C2200/3000 chopping unit. Forward, reverse and neutral are electrically selected from the driver's cab. Cutting length adjustment (12 lengths) by combination of 4-speed transmission and number of knives. Special wear-resistant coating for chopping blades and counter blade.

4 CHAMPION C 3000 universal precision forage harvester - row-independent Rear-mounted With pick up 2 m With pick up 3 m NEW C 3000 Uni Cracker Metal detector (optional equipment) Magnetic foreign objects in the crop are detected, immediately tripping a safety catch before they are drawn into the chopper. Cutting length adjustment (12 lengths) by 4-speed transmission, electrical control console for operation from driver's cab. Stepless hydraulic chute rotation 300 with electrically operated double flap and 12 V servomotor, spring assisted manual folding. Optional equipment hydraulic double flap, hydraulically height adjustable with access panel, 30 cm higher than standard. Wedge-shaped, interlocking cracker rollers Crushing all maize kernels Increased throughput and area covered in a day Optimal utilisation of crop s nutritional value Can be retrofitted

5 Standard equipment Forage harvester C 1200 Forage harvester C 2200 Forage harvester C 3000 Attachment FRONT REAR and SIDE ATTACHMENT Tractor three-point hydraulics Cat. II Rear or front 3 point linkage with reversing transmission for two speeds, in maize 1150 rpm and grass 850 rpm, mechanical side shift, left and right. Rear 3 point linkage attachment with height-adjustable support wheels. Drive 1000 rpm PTO shaft with friction and overrun clutch; FRONT or REAR version. Incorporating a swivelling frame and drive system via powerband and twin shaft 90 gearbox. High-speed saw blade cutting across the full width 1.25m with replaceable segments rpm PTO shaft with overrun clutch rpm PTO shaft with overrun clutch. Mowing System 2 high-speed saw blades cutting across the full width of 2.28m with replaceable segments. 2 high-speed saw blades cutting across the full width of 3.00m with replaceble segments. Champion headers with rotary saw blades. The rotating gathering drums feed the crop lengthways into the chopper. Choppin device Centrally adjustable flywheel (1180 rpm) with 12 tungsten carbide-coated blades specially serrated for Kernel crushing. Reversible shear bar with hardened edges. Built-in knife sharpening device, replaceable chopper housing lining. Kernel cracking grating. Centrally adjustable flywheel with 12 tungsten carbide-coated blades, reversible shear bar with hardened edges, integral knifes sharpening device, replaceable chopper housing lining chute liner. Cracker grating for kernel-crushing and smooth plate. Centrally adjustable flywheelwith 12 tungsten carbide-coated blades, reversible shear bar with hardened edges, integral knife sharpening device, replaceable chopper housing lining and chute liner, cracker grating for kernel crushing and smooth plate. Intake Twin intake rollers with aggressive teeth, one sprung pre-compression roller and one smooth roller for optimum compression at the shear bar. Intake and pre-compression rollers aredriven by oilbath transmission. Overload protection Folding and hydraulically rotating ejection chute (140 ), adjustable ejection double flap (electrically operated). The 2 intake and 2 pre-compression rollers are driven by jointed shafts with safety clutch and oil-immersed transmission, 4-speed transmission for 4 intake speeds, electrically operated forward/neutral/reverse with automatic de-clutching. The 2 intake and 2 pre-compression rollers are driven by jointed shafts with safety clutch and oil-immersed transmission, 4-speed transmission for 4 intake speeds, electrically operated forward/neutral/reverse with automatic de-clutching. Hydraulically rotating ejection chute. Manual spring assisted folding with transport position, double ejection flap electrically operated. Ejection chute Ejection chute rotation via hydraulic engine and bevel gear system, folding ejection chute spring-mounted and with transport detent, double ejection flap electrically operated. Operation Electrically operated ejection double flap and hydraulically operated ejection chute. Electrically operated gear box and double ejection flap, hydraulically controlled ejection chute and hydraulic header lift. Electrically operated gear box and double ejection flap, hydraulically controlled ejectin chute and hydraulic header lift. Row independent harvesting of maize & other types of crops. Wide range of applications: Maize, sorghum, sunflowers, whole crop silage, oilseed rape, hemp, pampas-grass, etc. Cutting lengths Number of blades and changing V-belt pulley. Blades V-belt pulley Ø mm mm 7, Tractor connections required: 1 double-acting control valve required on tractor. Adjustable via 4 speed transmission and number of cutting blades. Gear: blade mm: 4,3 5,4 6, blade mm: 8,6 10,8 13, blade mm: 12,9 16,2 19,5 33 Tractor connections required: 1 double-acting and 1 single acting control valve. Adjustable via 4-speed transmission and number of blades. Gear: blade mm: 4,3 5,4 6, blade mm: 8,6 10,8 13, blade mm: 12,9 16,2 19,5 33 Tractor connections required: 1 double-acting control valve. Technical data Length m: Width m: Height of working position m: Height of transport position m: Working width m: Power requirement kw: Weight kg: PTO speed rpm: Row interval Forage harvester with header 2,80 1,76 3,95 1, Row-independent Forage harvester with header impl. with pick up 2,55 2,15 2,35 2,40 4,20 4,20 3,70 3,70 2,28 2, Forage harvester with header impl. pick-up 2 m pick-up 3 m 2,80 2,15 2,35 3,00 2,60 3,00 4,20 4,20 4,20 3,70 3,70 3,70 3,00 2,00 2, The Champion C 2200/3000 can be used with a 2.00 m wide grass pick-up. High-speed flywheel for the best chop quality and best feed quality. Optional equipment Support wheel left and right, heightadjustable crop lifter, rigid crop lifters, mechanically driven crop divider, 2nd. ejection extension, folding turret with damping. Row-independent harvesting head, pick up,serrated knives, hydraulic side shift, support wheels, metal detector, height-adjustable crop lifters, rigid crop lifters, remote control for front attachment. Row-independent harvesting head, pick up,serrated knives, heavy duty PTO shaft, metal detector, height-adjustable crop lifters, rigid crop lifters, UniCracker, central lubricating system, whole crop divider.

6 The company Maschinenfabrik KEMPER GmbH & Co.KG Founded 1908, in Stadtlohn, Westfalen, Germany, development, manufacture and sale of agricultural machinery, on a site covering m 2, 220 employees. Modern systems and production plants, serving today's farmers and professional users. Genuine Kemper Service Parts Genuine service parts ensure the perfect operation of your Kemper harvesting implement. The KEMPER range of products row-independent harvesting implements with working widths up to 7.5 metres. Grass pick up row-independent tractor mounted forage harvesters CornStar corn header with rotation intake Support wheel Illustrations and specifications are not binding. A KEMPER... in any case! Maschinenfabrik KEMPER GmbH & Co.KG P.O. Box 1352 D Stadtlohn, Germany Telephone +49 (0)2563/88-0 Fax + 49 (0)2563/8844 and info@kemper-stadtlohn.de Internet