Forage harvester Fendt Katana 65 85

Transcription

1 Forage harvester Fendt Katana 65 85

2 Fendt Katana 2 3 The range Fendt forage harvester With the completion of the harvesting machine line, the Fendt brand has become a long-liner for key machines. Fendt has been working on the expansion of the forage harvester range in giant steps and now offers two models with up to 850 hp. Fendt has also further developed the technology found in the forage harvesters: automatic steering system and documentation have found their way into the range. Katana hp 480 kw Katana hp 850 kw Maximum power to ECE R120

3 4 5 The power of precision Fendt engineers have trimmed the main chopping units for maximum performance from the very beginning. The Fendt Katana has already proven its power and performance, amongst other things, through the biggest cutterhead currently available on the market. In addition to power, the Katana also stands for precision. Fendt sets standards with the V-Cracker, which guarantees outstanding chopping quality through its ingenious design. The overall operating concept is designed for precise control and adjustment. Newly introduced technologies, such as the automated steering, guarantee precise work and therefore the highest area coverage with up to 850 hp. X5 cab with extra comfort Extra ergonomics and operating comfort, extra visibility and lighting, extra space Maximum output in tonnes per hour Effective feed through header mounted on an innovative swinging frame and six feed rollers 720-mm diameter cutterhead is the largest on the market Highest quality chopped material Innovative V-Cracker with unique functionality and 125% more cracking length than conventional rollers Maximum profitability through low fuel consumption Up to 850 hp for maximum output Eco-/Power drive concept Maximum operational reliability Easy maintenance thanks to excellent accessibility Fendt Service technicians with special training offer fast on-site service Ideal ride comfort Rear axle suspension for the best ride comfort on the road Extremely tight turning circle

4 Visio5 cab 6 7 Generously dimensioned and ergonomically designed The Visio5 cab provides extra ergonomics and operating comfort, extra visibility and illumination and, most of all, extra space. Operator ergonomics have been exceptionally well implemented in the generously sized cab from the legroom to the perfectly designed multi-function joystick. The large glazed areas give operators an outstanding view to the header and the entire discharge area of the spout.

5 Visio5 cab 8 9 Best visibility day or night Ideal visibility All-round visibility from the cab is guaranteed. The large glazed areas in the cab provide an unobstructed view to the header as well as the feed and discharge areas, which makes adjusting the machine much easier. The engine on the Katana is mounted longitudinally so it can be positioned lower, which allows low sightlines towards the rear of the machine. This gives operators a perfect view in all directions. See even more With the camera, you have even more in view. When driving forwards, the screen in the cab displays the image from the camera on the spout, so that the trailer can be filled perfectly and uniformly. When reversing, the screen automatically switches to the rear camera so that the operator can see any possible obstacles behind the machine. That significantly increases safety. Light at night In forage harvester operations, every single minute counts, day or night. The extensive lighting concept provides bright and far-reaching illumination around the Fendt Katana, so that work can continue, even when it is dark outside. The wide steps are illuminated to allow safe climbing up and down from the machine. Large glazed areas for excellent view to the header and the spout Extensive light package Entry steps with handrails on both sides, wide steps and integral lighting Giant glazed areas and unobstructed visibility The strongly curved front window has A-pillars that have been set further towards the rear, so the entire header is in view. Best overview, even towards the rear To provide optimum visibility towards the rear, and therefore perfect all-round vision, the engine has been mounted longitudinally and the body of the machine has been kept extremely low at the rear. Best accessibility through wide cab entrance Giant glazed areas and unobstructed visibility The Visio5 cab has been designed for optimum visibility and offers perfect ergonomics and easy-to-use controls in the workplace. Thanks to the special shape of the roof line, operators always have the chute flap in view. Automatic climate control and heating guarantee a pleasant working environment. Extensive lighting package is easy to operate Headlights main/dipped beam, 1 pair of auxiliary headlights, 3 pairs of work lights in the roof, 1 pair of side finders for illuminating the header, 1 pair of work lights at the rear and 2 work lights for the spout. Cool drinks are always on board A large cool box for refreshments is located under the comfortable instructor seat.

6 Visio5 cab Precise control Everything at hand The Visio5 cab has been designed for ideal ergonomics. Operators can easily find an optimal sitting position on the air-suspended seat. There is plenty of legroom and the steering wheel is height and tilt-adjustable. The right armrest holds all the controls. All of the important functions are housed in the multi-function joystick and Varioterminal or assigned to rocker switches and membrane keys. The tilted position of the multi-function joystick makes it a perfect hand rest for maximal comfort, even for long days. The Varioterminal The Vario-Terminal, very popular with users, has been adopted in the forage harvester and adapted to its operating philosophy. It can be operated either with the touchscreen or the keys and rotary control. The menu has been designed for ease of operation and has a flat and intuitive menu hierarchy. The conveniently placed 4-way keys on the multi-function joystick allow convenient adjustment of the most important cutting functions. Varioterminal well-structured Operators always have the most important information in view in the large Varioterminal. The most important information, such as direction of travel, fuel consumption, header position or cruise control, is always clearly in view in the upper right quarter. The toggle switches in the right-hand navigation bar lead directly to the individual menus. These include, for example, the settings for the forage harvester, header height and cutting length as well as job management. The Varioterminal with colour display, touchscreen (operation using rotary control and keys is also possible) is easy to operate and guarantees detailed machine monitoring, to keep the machine operating reliably. Generous amount of space and high ride comfort thanks to climate control and air-suspended seat High ride comfort through airconditioning and comfortable seat Header raise/lower and automated functions Spout and flap With the touch of a finger The toggle switches provide easy control of functions such as folding the support wheels for the maize header and pick-up up/down, tilting the header, raising/lowering the spout. Membrane keypad within easy reach The membrane keypad is located directly in the armrest and is used to operate the hand brake, field/road driving modes and Eco/Power mode, activating the cutting unit, the engine speed, header on/off, position of the spout, additional silage additive and rear axle suspension on/off. Ergonomically designed control console on the right-hand armrest Varioterminal for optimum machine adjustment using either the touchscreen or the operating elements Feed on/off and reversing Multi-function joystick, extremely ergonomic through the tilted position and hand rest, has two 4-way buttons for controlling the header and spout One individually assignable key Automatic rotation of spout Automated functions, such as the cutting height control, maximum output control control and VarioDoc, increase profitability Handy operating element on the right-hand armrest The practical right armrest, which is very popular with Fendt tractor drivers, has been adopted and adapted to the forage harvester. It is not only a comfortable armrest, but also an ergonomic control unit with toggle switches and membrane keys for auxiliary functions. Varioterminal screen on the road When driving on the road, the ground speed and engine speed, the fill levels for diesel and AdBlue, as well as the temperature, support wheel function and fuel consumption can be monitored in the terminal. Varioterminal screen in the field Information about the utilisation of the forage harvester, cutting length, header and feed roller speed as well as the preselected working and lifting heights for the header are clearly displayed here. Comprehensive machine monitoring via CANBus electronics

7 Fendt Variotronic Precision in operation Automatically economical The Variotronic contains state-of-the-art electronic functions that further increase the economical use of the Fendt Katana. For example, the automatic cutting height control for the maize header guarantees a thorough cut. Automatic maximum output control and automated steering ensure maximum utilisation of the forage harvester. And with VarioDoc, all operations are carefully documented. Always the right speed The maximum output control automatically adjusts ground speed to match the harvesting and crop conditions. Engine power is utilised optimally to achieve maximum output. Machine utilisation is clearly displayed in the Varioterminal. Precise work For maximum area coverage, precise work is the key to success. The VarioGuide automated steering makes this easy for operators. Reception using the latest satellite technology is reliable and stable. An accuracy of up to +/- 20 cm is possible. Everything documented The Fendt documentation system VarioDoc logs all relevant data, such as worked area or fuel consumption, during operation. The data is then transferred to the computer wirelessly. This way, you always have an overview of the completed work. It is very easy to set the boundary for a particular area and the wayline offset with the Varioterminal. The automatic maximum output control automatically controls the forward ground speed of the Fendt Katana dependent on the crop density. You can achieve maximum area coverage through precision work with the VarioGuide automated steering, for example, using the AB mode.

8 Uniform crop flow and best chopping results Quality counts The chopped material flows efficiently and with a high throughput. From the header, to the unique swinging frame for the feeding units, to the six feed rollers, to the large closed cutterhead, to the powerful discharge system, the Fendt Katana has been designed for high output. The refined technology of the chopping units also guarantees highest quality of the chopped material.

9 Uniform crop flow and best chopping results A perfect start for optimum crop flow Perfect on the ground The maize header is available with either eight, ten or twelve rows. The cutting height can be preselected using the Varioterminal. Assisted by feelers, the header actively follows the contours of the ground and keeps the height of the header constant, both laterally and longitudinally. The three metre wide pick-up features active ground pressure control. Even at high speeds, the pick-up automatically adjusts to ground contours using two gauge wheels, so grass is picked up completely. Intelligent coupling with the swinging frame Headers are coupled to the unique Fendt swinging frame. It is support on three rolls and is actively controlled via a cylinder that is coupled with sensors on the maize header. The pivot point is located in the centre of the feed channel. The advantage is that even when the header is tilted, the cross-section remains almost the same size and the crop is uniformly fed to the feed rollers. Six feed rollers for effective crop feed Crop feed over six feed rollers guarantees optimal pre-compression of the chopped material and produces high quality chopping results. The 770-mm width of the rollers permits feeding of large quantities of material. The cutting length can be infinitely adjusted from four to 42 mm from the driver seat. Thanks to the independent hydrostatic header and feed roller drivelines, the header speed can be optimally adapted to the harvesting conditions. The cutting length remains constant. For emergencies There is a large distance between the metal detector and the cutterhead to allow for enough time to detect metal objects, even with long cutting lengths. If foreign objects enter the feed area, the main drive stops immediately, completely automatically. 8, 10 or 12-row maize header with automatic cutting height control Maize header can be used for GPS operations Swinging frame swung out Swinging frame in middle position Swinging frame swung out The header is coupled to an innovative swinging frame. It actively swings on three rollers and a cylinder above the frame and adjusts itself to the position of the header. The pivot point in this ingenious system lies in the centre of the feed channel; when the frame swings, the cross-section remains almost the same size and the crop flows uniformly to the feed rollers. Three-metre wide grass pickup with active ground pressure control Innovative swinging frame for uniform feed, even when the header is tilted Six feed rollers 770 mm wide In-cab infinite adjustment of cutting length from 4 to 42 mm Metal detector reliably finds foreign objects Three-metre wide pick-up with gauge wheels that fold up hydraulically. The maize header is available with either ten or twelve rows. For on-road driving, the header folds up hydraulically, so it can be brought into transport position quickly. Six feed rollers for high compression The six hydraulic driven feed rollers guide the crop uniformly to the cutterhead. A spring assembly creates high compression for a precise cut. The cutting length is infinitely adjustable from 4 to 42 mm, which allows an optimum cutting length to be set, for example, for fodder or use in biogas facilities.

10 Uniform crop flow and best chopping results Big, ingenious and flexible The biggest cutterhead The heart of the Fendt Katana is the closed cutterhead which, with a 720-mm diameter, is currently the biggest on the market. The high inertia of the drum makes it especially smooth running and allows it to compensate for differences in material flow. Its large diameter also results in a very high cutting frequency. Combined with the v-shaped arrangement of the 28 knives, this guarantees excellent quality of the chopped material as well as uniform crop transfer to the V-cracker and discharge blower. Always razor sharp The automatic knife sharpening system quickly returns the hardened knives to their full sharpness. The whetstone for the knives is readjusted on both sides so the knives are sharpened uniformly. The sharpening time can be conveniently adjusted in the Varioterminal. More surface area for thorough kernel processing The kernels are cracked highly efficiently in the innovative V-Cracker. The meshing cylinders have a special design that provides a large friction surface. Since the rollers rotate at the same speed, their power requirement, and therefore also fuel consumption, is low. When switching from maize to grass, the cracker can be swung out of the way electrohydraulically in the shortest time. Optimum adjustment to crop Precompression can be adjusted hydraulically in six stages in the Varioterminal. This allows the cracker rollers to react optimally to the consistency and volume of the crop. This guarantees optimum crop flow with outstanding kernel processing. +125% 1,350 mm 600 mm High throughput through closed cutterhead with 720 mm diameter High-capacity discharge blower V-shaped arrangement of the 28 knives Sized for quality The cutterhead, with a 720-mm diameter, has a very high cutting frequency due to its enormous size. This guarantees gentle chopping, even with large quantities of material, and guarantees an optimal cutting frequency. Efficient V-Cracker On the V-Cracker, the cracking length is more than twice as long. Conventional design with simple cracking length V-Cracker guarantees thorough kernel processing Fendt has chosen an ingenious design for the V-Cracker. Through the use of rollers fitted with corrugated discs, the cracking length of the cracker is more than twice as long as on conventional rollers. Since the discs mesh, the speeds on the inside and outside of the disc are different. This results in highly efficient and thorough cracking of the maize kernels. If necessary, the cracker discs can be replaced individually. Hardened knife profile for constant sharpness, optimal cut and long maintenance intervals Automatic knife sharpening system is operated via the Varioterminal New V-Cracker with two meshing rollers and bigger surface area Six feed rollers Large cutterhead Rotating V-Cracker When switching between crops, for example from maize to grass and vice versa, the V-Cracker can remain in the machine for short periods. The V-Cracker can be quickly rotated back behind the discharge blower electrohydraulically. To prevent bearing wear caused by shock loads and vibrations, the belts continue to drive the V-Cracker without function. This rotating procedure can be preset in the Varioterminal and then conveniently triggered per pushbutton located in the maintenance area, when required. The grass chute is then automatically brought into position. Removing the V-Cracker is also very easy, since the maintenance area has plenty of space for accessibility. V-Cracker swings out of the way for fast changes from grass to maize and back again Chopping units have a lower power requirement and therefore lower fuel consumption

11 Discharge Everything must go Save power The discharge blower, an open rotor with upright v-shaped elements, moves the crop to the trailer with little effort. The decisive factor for optimum unloading capacity and discharge distance is the right setting of the blower. Fuel consumption is kept at a minimum thanks to the efficient discharge system. Flexible spout The spout on the Fendt Katana can be rotated 210 and quickly changed over to the other side of the machine for unloading without a problem. The speed at which it rotates can be preselected in the Varioterminal and adapted to the prevailing harvesting conditions. The height can be adjusted hydraulically to up to six meters and even the highest transport vehicles can be loaded. Thanks to the excellent view to the discharge area, it is possible to fill the trailer precisely. Monitoring and safety Using the standard specification camera, operators can monitor the filling level in the transport vehicle from a screen in the cab of the forage harvester. Furthermore, an optional transmitter unit on the screen of the forage harvester can transmit the camera image to an external receiver unit. When reversing, the camera image in the forage harvester is automatically switched to the standard-equipped reversing camera. Using the multi-function lever, the spout can be quickly rotated to the other side of the machine with the touch of a button. Even with an unloading height of up to six metres, operators have the chute flap in full view. For optimized trailer filling, the spout can be extended, when using wide headers. The discharge blower is designed as an open rotor with upright v-shaped elements. The blower's clearance to the back wall and the discharge opening can be adjusted. Discharge is especially fuel-efficient Spout rotates 210 Unloading height up to six metres Optimal view to the discharge area Camera image of the fill level of the trailer is available for operators of the forage harvester as standard Precise operation of the discharge system via multi-function joystick Spout can be extended

12 Driveline and vehicle design Powerful and highly efficient The engines from Mercedes-Benz and MTU, offer power, durability and reliability. With the SCR technology for exhaust after-treatment, the Fendt Katana 65 achieves high fuel- efficiency while at the same time maximising performance. The powerful MTU engine in the Fendt Katana 85 does not have SCR, but already complies with the newest emissions standard. In operations that require less power, such as in grass, the Eco drive mode guarantees even lower fuel consumption.

13 Driveline and vehicle design Powerful engine Drive ahead economically The Fendt Katana 65 is powered by a 16-litre V8 Mercedes Benz engine, whose performance curve has been adapted to forage harvester operations. For compliance with emissions standard EURO Stage 3b (Tier IV interim), the forage harvester with 653 hp is equipped with the fuel-saving SCR technology. Fendt thus offers maximum profitability through low fuel consumption with environmentally friendly technology. The new power of the Fendt Katana 85 The 850-hp Fendt Katana 85 has a new 21-litre V12 engine from MTU. Fendt and MTU collaborated on the development of the engine and adapted it to the requirements of the forage harvester. The tank system has a modular design to permit high performance over long working hours: you can either fill up 1,250 litres of diesel and 200 litres of water as a silage additive or a full 1,500 litres of diesel. Always the right temperature The reliable cooling system, always keeps the longitudinally mounted engine running in the optimum temperature range. The intake areas of the large cooling unit are continually cleaned through active dust extraction, so there is no build-up to obstruct air intake. You benefit from long maintenance intervals. The 16-litre 8-cylinder Mercedes-Benz engine is efficient, powerful and reliable. It is equipped with SCR technology for maximum fuel-efficiency. Exhaust is after-treated with AdBlue, a 32.5 percent solution of urea, which converts nitrous oxides NOx into non-toxic nitrogen and water. The consumption of AdBlue, the standard urea-water solution used by commercial vehicles, lies at about four percent of the diesel consumption. This can vary depending on the operation. AdBlue is available at filling stations or through AGCO Parts. The new MTU engine delivers precisely the performance characteristics that powerful forage harvester operations demand. The 21- litre V12 engine delivers a whopping 850 hp and already complies with the TIER4 Final emissions standard. The engine does not need any additional resources, such as AdBlue. 16-litre V8 engine with a maximum output of up to 653 hp at only 1,800 rpm New 21-litre V12 engine with 850 hp for the Katana 85 Fuel-saving and environmentally friendly SCR technology with AdBlue exhaust treatment for the Katana 65 Long stretches of work possible through large fuel and AdBlue supply for the Katana 65: Diesel tank: 1,100 l AdBlue tank: 250 l Modular tank system for the Katana 85: 1,250 litres diesel litres water or 1,500 litres diesel Reliable cooling system with active dust extraction

14 Driveline and vehicle design A ground drive that is always just right Efficient hydrostatic ground drive The hydrostatic drive on the Fendt Katana, together with the innovative engine technology and electronics, guarantees highly efficient operations. The front axle is driven by independent wheel motors with integral brakes. This spacesaving design creates space for the all-important large-sized chopping units. Everything in motion Thanks to the hydrostatic drive, the speed for the header can be regulated independent and can be optimally adjusted to the prevailing conditions. The cutterhead, the V-Cracker and the discharge blower are driven by a belt drive. Save some power Full engine power is not always required. When doing light work, such as in grass, the Eco mode is activated, which reduces the engine speed from 2,000 to a fuel-saving 1,600 rpm. The working speed of the feeding system, the drum and the discharge system remain constant, which maintains a high cutting frequency and results in optimal throughput. V-Cracker driveline Switching between Eco mode and Power mode takes place through a two-speed gearshift assembly in the angular gearbox. During light operations in grass, the engine operates at a low speed in Eco mode. The speed of the chopping units, however, is still maintained at the required speed in the optimum range. Fuel consumption [l/hr] Fuel consumption [ l/t FM ] The savings that the Eco mode provides over the Power mode in terms of fuel consumption l/hr and engine speed become obvious in the DLG test % rpm 1963 rpm Eco mode Fuel consumption [ l/t FM ] AdBlue consumption [ l/t FM ] Eco mode 10.3% Power mode Comparison Eco and Power mode in terms of fuel consumption l/hr and output t/hr Power mode Hydrostatic ground drive and optimum control of the oil volume on the steering and drive axles Independently adjustable speed for header and feed rollers Reliable belt drive for chopping units Eco mode for highly efficient operation in grass The cutterhead and the discharge blower are driven by a belt drive t/hr FM Fuel consumption [ l/hr ] AdBlue consumption [ l/h ] 57.0 t/hr FM

15 Driveline and vehicle design Comfort makes you faster Top manoeuvrability The rear axle of the Fendt Katana has an excellent steering angle. Together with the compact design of the machine, this enables very high manoeuvrability. Manoeuvring is fast and easy in every situation. 40 km/h with full suspension When driving on the road, the oil volume from the steering axle is transferred to the front drive wheels, so the machine moves forward faster. The hydraulic suspension on the rear axle is unique and provides high ride comfort in the field and on the road. You can fully utilise the 40 km/h transport speed and the machine can be moved from site to site faster. Move ahead on all paths The Fendt Katana has traction in difficult ground conditions. The hydrostatic drive for the steering and drive axles controls the oil volume and can distribute it to all four wheels in the field. Electronic anti-slip control on the drive axle adjusts the wheel torque to the ground conditions, which minimises front wheel slip. The differential lock on the steering axle prevents the rear wheels from spinning. Four-wheel drive is standard specification on the Fendt forage harvester. The excellent steering angle of the axle ensures excellent manoeuvrability. Fast moving between sites with a transport speed of 40 km/h Hydraulic rear axle suspension for minimising shock loads and for maximum ride comfort in the cab 6330 mm (Katana 65) Compact design and extremely manoeuvrable The headers are mounted very close to the vehicle, which reduces the load on the front axle. That minimises soil compaction. The optimised frame design in combination with a large steering angle on the rear axle, make the forage harvester exceptionally manoeuvrable. Anti-slip control minimises front wheel slip Differential lock in the rear axle for best traction Hydrostatic four-wheel drive is standard specification The rear axle has suspension to absorb shock loads in the field and on the road. That protects both the operator and the machine.

16 The sum of the technical solutions 30 creates the technological lead 31 Cutting-edge technology 31 Innovative technology for the best efficiency and performance are packed inside the Fendt Katana Swinging frame for coupling the header 2. Six feed rollers 3. Spring assembly for feed rollers 4. Hydraulic drive for feed rollers 5. Cutterhead (720 mm diameter) 6. Cutterhead drive 7. Innovative V-Cracker 8. Drive V-Cracker 9. Blower 10. Drive discharge blower 11. Drive dust extraction cooler 12. Main gearbox (Eco/Powermode) 13. Oil pump for ground drive 14. Oil motor for 4WD 15. Wheel motor for drive axle 16. Oil pump for header/feed roller drive 17. V8-engine with SCR technology (Katana 65) 18. Hydraulic rear axle suspension 19. Chute flap with camera and lighting 20. Support for spout with rear lighting 21. Spout (up to 6-metre unloading height) 22. Hydraulic swivel/fold device 23. Clutter-free Visio5 cab 24. Air-suspended driver seat 25. Varioterminal with touch control 26. Ergonomic armrest with membrane keypad 27. Multi-function lever with integral hand rest 28. Multi-adjustable steering column 29. Monitor for optional camera on chute flap and rear area 30. Headlights and turning signal indicators 31. Auxiliary headlights and work lights 32. Wide-angle mirror

17 Maintenance Service Very easy maintenance Always in operation Excellent accessibility Thanks to excellent accessibility, maintenance work can be carried out swiftly. The large side panels open easily via parallelogram-type linkage. The mudguards can be removed tool-less very easily for perfect access to the engine. The maintenance platform between the chopping unit and the engine is very generously dimensioned. The fold-down ladder is practical and provides easy access to the hydraulic and driveline components. The intervals for the central lubrication system can be set using the Varioterminal. Top service at your side You can rely on the highly-skilled Fendt Service Team to keep your Fendt forage harvester mobile at all times. To ensure the highest operational availability of your machine, Fendt has set up a special dedicated service organisation for the forage harvester together with award-winning Fendt sales partners, which will provide you with toplevel service support during the season, seven days a week. Spare parts are always available Fendt offers you professional service and constantly sets standards in the industry in this area. Through regularly held training programmes, the service personnel is trained to provide for a good spare parts inventory and to keep the machines in operation during the harvest at all times. Fendt and its dealers are ready to give you the best service possible for your investment.

18 Technical Specifications The Fendt overall profitability Fendt Katana 65 Katana 85 Engine Manufacturer Mercedes Benz OM 502 LA MTU BR 1600 Type / emissions standard 3B (Tier IV interim) 4 (Tier IV final) Engine power (KW/hp)(ECE R 120) 480 / / 850 No. of cylinders V 8 V 12 Cubic capacity (l) Exhaust gas after-treatment SCR Fuel tank (l) diesel/250 water or 1350 diesel (optional) AdBlue tank (l) 250 Fuel consumption measurement Standard Standard Ground drive Type hydrostatic hydrostatic 4WD hydrostatic, standard hydrostatic, standard Speed field 0-20 km/h 0-20 km/h Speed road 0-40 km/h 0-40 km/h Steering axle hydraulic suspension hydraulic suspension Feed rollers Type 6 6 Drive hydrostatic hydrostatic Cutting length adjustment infinitely adjustable from cab infinitely adjustable from cab Cutterhead Diameter (mm) Width (mm) Number of knives 2x 14 (7) 2x 14 (7) Speed (rpm) Chopping length 28 knives (mm) Chopping length 14 knives (mm) Kernel processing Model V-Cracker V-Cracker Type wedge discs / double roller wedge discs / double roller Blower Design open rotor with upright v-shaped elements Rotor diameter (mm) Rotor width (mm) open rotor with upright v-shaped elements Spout Swing angle (degrees) Unloading height (m) 6 6 Weights and dimensions Weight without header (kg) Length incl. discharge (mm) Transport width with standard tyres (mm) Transport height (mm) Invest right and keep on saving With the Fendt Katana you get true cutting-edge technology from Fendt. But for overall profitability, the Fendt forage harvester needs a bit more: competent consultation and support through a highly motivated Service team and a reliable and fast spare parts service. Fendt provides all of this, which secures the high operational security and availability of your machine. Fendt overall profitability Fendt Efficiency for the best cost-effectiveness per hectare and tonne Fendt Comfort for performance-enhancing working conditions day after day Fendt Service for competent consultation and full reliability Fendt Flexibility for custom financing and individual offers Efficiency: the recipe for successful economical operations We make no compromises when it comes to efficiency, because our objective is to be the leader for cost-effectiveness per hectare. For this, the superior technology that we build into the Fendt Katana is just good enough: for example, the large-sized chopping units, the innovative V-Cracker, a highly efficient hydraulic drive and the fuel-saving SCR technology in combination with Eco Power mode and the load limit control. With these we have succeeded in achieving first-class efficiency and have optimised the costs per hectare and per tonne. Tyres Drive axle standard 650 /75 R /70 R 42 Option 710 /75 R /70 R /70 R /60 R /65 R /60 R 32 Steering axle standard 500 /80 R /70 R 34 Option 600 /65 R / / /70 R 34 IF 620/75 R /60 R 30 Headers Pick up (m) 3 3 Maize header 360 Plus (m) 6 Maize header 375 Plus (m) Maize header 390 Plus (m) 9 9 Maize header 460 Plus (m) 6

19 Leaders drive Fendt Sales agent: AGCO GmbH Fendt-Marketing Marktoberdorf, Germany Fendt is a world wide brand of AGCO. All data regarding delivery, appearance, performance, dimensions and weight, fuel consumption and running costs of the vehicles correspond with the latest information available at the time of going to press. Changes may be made before the time of purchase. Your Fendt dealer will be pleased to supply you with up-to-date information. Kat/2.0-EN/ /5.0-E