Medium Voltage Products. SHS2 Gas-insulated switching and isolating apparatus
|
|
- Jesse Lawrence
- 6 years ago
- Views:
Transcription
1 Medium Voltage Products SHS2 Gas-insulated switching and isolating apparatus
2
3 Index 2 1. Description 7 2. Operating mechanisms 9 3. Accessories Type available Overall dimensions Fuses Electrical diagrams Switchgear applications 1
4 1. Description General The SHS2 switching and isolating apparatus consist of gasinsulated switch-disconnectors and isolators, suitable for use in medium voltage metal-enclosed switchgear. They are used in secondary distribution substations for supplying lines, power transformers and ring networks. Technical characteristics The SHS2 switch-disconnectors and isolators are made up of a stainless steel cylindrical housing, a set of three top insulators and a set of three bottom insulators made of epoxy resin, and a front operating mechanism. The blade contacts for isolation, breaking, closing and earthing are arranged inside the cylinder in SF6 gas at a pressure of 125 kpa absolute. The unit is the sealed for life type complying with the IEC Standards. It is therefore free from any problems of gas tightness. A gas exhaust valve is located in the rear part of the cylinder for any over-pressure. The contacts can take up three positions: CLOSED - OPEN - EARTHED. The position of the contacts can be verified from the front of the operating mechanism by means of a reliable indication, in compliance with IEC and CEI 17-4 and with the IEC and CEI EN Standards. The three top insulators act as a support for the fixed contacts and allow fixing of the main busbars. The three bottom insulators act as a support for the moving contacts and allow connection of the cables or of the busbars Moving contact operating shaft 2 Top insulator 3 Upper fixed contact 4 Gas exhaust valve 5 Stainless steel housing 6 Operating mechanism 7 Bottom insulator 8 Moving contact 9 Earth contact
5 Closed Open Earthed The stainless steel housing provides a metal earthed segregation between the busbar compartment and the feeder compartment of the unit the apparatus is installed in. This characteristic ensures maximum personnel safety during any intervention in the feeder compartment, such as replacement of one or more fuses or cable maintenance, even with the main busbars energised. Furthermore, the metal segregation provided by the housing considerably reduces the possibility of a short-circuit between the phases and between the upper and lower contacts of the same phase due to leakage currents. 3
6 1. Description Compliance with Standards IEC CEI EN Common requirements for high voltage switching and control apparatus. Isolator IEC CEI 17.4 Isolators and earthing switches with alternating current and voltage higher than 1000 V. Switch-disconnector IEC CEI EN Common requirements for high voltage switching and control apparatus. IEC CEI 17-9/1 Control circuit-breakers and switch-disconnectors for high voltage. Part 1: Control circuit-breakers and switchdisconnectors for rated voltages higher than 1 kv and lower than 52 kv. Electrical characteristics Rated voltage Rated Normal Current (40 C) Frequency Rated making capacity on short-circuit Without external earthing switch With external earthing switch ( 1 ) Rated short time withstand current - 1s ( 1 ) Rated breaking capacity Mainly resistive load service No-load transformer service kv A Hz kap kap ka A A Switch-disconnector combined with fuses IEC CEI EN Switch-disconnectors combined with high voltage fuses for alternating current. The fuses must comply with DIN Standards. IEC CEI EN Common requirements for high voltage switching and control apparatus. IEC CEI EN Fuses with voltage higher than 1000 V. Part 1: current-limiting fuses. No-load line service No-load cable service Ring circuit service Operating Mechanism Test parameters for making capacity, breaking capacity and making capacity under short circuit - rms (IEC ) Electrical life Transfer current secondo IEC Maximum overtemperature test under normal load C Mechanical life Atmospheric impulse withstand voltage Phase-Phase towards earth A A A A kvp Between open contacts kvp Withstand voltage at industrial frequency Degrees of protection Stainless steel enclosure Operating mechanism IP65 IP3X Phase-Phase towards earth Between open contacts ( 1 ) For different values contact ABB. ( 2 ) Up to 16 ka for V1 operating mechanism. kvrms/1 min kvrms/1 min 4
7 Switch-disconnector Isolator Earthing switch Feeder IEC IEC IEC Earthing Switch Earthing Switch Unit without fuses Unit with fuses Feeder Unit without fuses Unit with fuses (SHS2 ES) / / N.O. - - N.O. N.O ka 62.5 ka ( 2 ) ( 2 ) T1-T1M-T2-T2M T1-T1M-T2-T2M T2-T2M T3-V1 T3-V1 - T4 Test Duties E3 E1 E1 - E1 E1 E1 N.O. N.O. Ask ABB N.O. N.O. N.O. N.O. IEC IEC M1 M1 M1 (BIL 1.2/50 µs) (BIL 1.2/50 µs) (BIL 1,2/50 µs)
8 1. Description Quality System Complies with ISO 9001 Standards, certified by an independent organisation. Health and Safety Management System Complies with ISO Standards, certified by an independent organisation. Environmental Management System Complies with ISO Standards, certified by an independent organisation. Test Laboratory Complies with UNI CEI EN ISO/IEC Standards, accredited by an independent organisation. 6
9 2. Operating mechanism General The switch-disconnectors use T1-T1M and T2-T2M type operating mechanisms with separate operating seats for the isolation and earthing operations. The isolators use T3 and V1 type operating mechanisms with separate operating seats for the isolation and earthing operations and T4 with a single operating seat. With the T1-T2-T3-T4 operating mechanisms, the opening and closing operations are carried out manually locally by means of the operating lever provided. For the T2 operating mechanism it is also possible to carry out the opening operation remotely by means of a special shunt opening release. With the T1M and T2M motor operators, the closing and opening operations are carried out remotely. However, in case of emergency, they can also be carried out manually locally using the operating lever provided, or electrically by means of the special pushbuttons. The normal power supply voltages for the T1M and T2M motor operators are: 24 (*) V DC; V AC Hz. T1-T1M Operating mechanism with independent operation on exceeding dead centre This allows rapid manual or motorized closing and opening of the switch-disconnector with operating speed independent of the operator, obtained by using a single spring. Closing or opening takes place by charging the abovementioned spring (either manually of by means of a motor) until the dead centre is exceeded. It also carries out rapid manual closing of the earthing switch with operating speed independent of the operator. It is used in the SHS2/T1, SHS2/T1/N, SHS2/T1M and SHS2/ T1M/N type of switch-disconnectors. T2-T2M Operating mechanism with independent stored energy operation Allows rapid manual closing of the switch-disconnector with operation independent of the operator, obtained by means of a charged spring up to exceeding dead centre. (*) Only T1M Switch-disconnector operating seat 2 Earthing switch operating seat 3 Interlocking lever between switch-disconnector and earthing switch 4 Mechanical position indicators of the mimic diagram 5 Voltage indicator lamps (on request) 6 Key locks on switch-disconnector operation (on request) 7 Key locks on earthing switch operation (on request) SHS2/T1M switch-disconnector operating mechanism. 7
10 2. Operating mechanism During the closing operation, a separate spring is charged automatically which stores the energy for opening. Switch-disconnector opening can be carried out by means of: the operating lever a shunt opening release (applied onto the operating mechanism itself) on request the release system, activated by the striker fuse in the case of even a single fuse blowing (only for SHS2/T2F - SHS2/T2F/N - SHS2/T2MF - SHS2/T2MF/N). It also carries out rapid manual closing of the earthing switch with operating speed independent of the operator. It is used in the SHS2/T2, SHS2/T2/N, SHS2/T2F, SHS2/ T2F/N type switch-disconnectors and in the corresponding SHS2/T2M - SHS2 T2M/N SHS2/T2MF - SHS2/T2MF/N motorized versions. With the T2M operating mechanism, the closing operation can be carried out from remote or by means of the operating lever. T3-V1 Operating mechanisms with dependent operation These allow manual closing of the isolator and earthing switch with operation speed dependent on the operator. Closing and opening are obtained by working on the operating lever. The lever can only be removed after completion of the operation. The T3 type operating mechanism is used in the SHS2/I, SHS2/I/N, SHS2/IF and SHS2/IB type isolators. The type V1 operating mechanism is used in the SHS2/A type isolator. T4 Operating mechanisms with independent operation These allow manual closing of the earthing switch with operating speed independent of the operator. The opening and closing operations are carried out locally manually by means of an operating lever provided. The lever can only be removed after completion of the operation. The type T4 operating mechanism is used in the SHS2/ES type earthing switch. 1 Isolator and earthing switch operating seat Key locks on isolator and earthing switch operation (on request) 3 Key locks on earthing switch operation (on request) 4 Key interlock between isolator and circuit-breaker 5 Mechanical position indicators of the mimic diagram 6 Voltage indicator lamps (on request) 6 SHS2/IB isolator operating mechanism (type T3). 8
11 3. Accessories Optional accessories Operating mechanism Type of isolator Switch-disconnector-isolator key locks Earthing switch key locks Shunt opening release Microswitch for indication of fuse blown Auxiliary contacts Door lock Bus-side voltage indicator lamps Cable-side voltage indicator lamps Insulator crosspiece with or without capacitive dividers Spaced earthing switch Fuse adapters Retrofit Kit T1 T2 T1-T3-V1 T4 C Assembly by the customer. ABB Assembly by ABB. Accessory always supplied. Not available. SHS2/T1 C C C C C C C C SHS2/T1/N C C C C C C C C SHS2/T1M C C C C C C C C SHS2/T1M/N C C C C C C C C SHS2/T2F C C C ABB C C C C C C SHS2/T2F/N C C C ABB C C C C C C SHS2/T2 C C C C C C C C C SHS2/T2/N C C C C C C C C C SHS2/IF C C C C C C C C SHS2/I C C C C C C C C SHS2/I/N C C C C C C C C SHS2/IB C C C C C C C C C SHS2/A C C C C C C C C C SHS2/ES C C C C C C C SHS2/T2M C C C C C C C C C SHS2/T2M/N C C C C C C C C C SHS2/T2MF C C C ABB C C C C C C SHS2/T2MF/N C C C ABB C C C C C C 9
12 3. Accessories 1 Key locks 2 Auxiliary contacts These allow the apparatus to be locked in the closed or open position. It is possible to combine a maximum of four key locks for T1, T2 and T3 operating mechanisms, and a maximum of two key locks for T4 operating mechanisms. If key locks are not requested, a pre-assembled extension is supplied which allows the use of padlocks to lock the operations. These signal the position of the apparatus state. These signal the position of the apparatus state. It is possible to combine a maximum of two closing or opening contacts for each position (closed/open/earthed). SHS2 - T1, T2, T3 and V1 operating mechanism (*): Line-side isolator operation 1 free key IMS open 1 free key IMS closed 1 free key IMS open + 1 free key IMS closed 2 free keys IMS open 2 free keys IMS closed Earthing switch operation 1 free key ST open 1 free key ST closed 1 free key ST open + free key ST closed 2 free keys ST open 2 free keys ST closed SHS2/ES - (T4 operating mechanism) 1 free key earthing switch open 1 free key earthing switch open + 1 free key earthing switch closed 1 free key earthing switch closed 2 free keys earthing switches closed 2 free keys earthing switches open IMS Switch-disconnector. ST Earthing switch. (*) A key interlock, with the key free with the line-side isolator closed, is always supplied as a compulsory application. 3 Shunt opening release (only T2-T2M operating mechanism) This is an electromechanical device which, following energisation of an electromagnet, activates the release lever of the operating mechanism making the switch-disconnector open. Power supply voltages: V DC V AC Hz. 10
13 4 Voltage indicator lamps 6 Door lock These can be supplied with one or two sets of three lamps integrated in the operating mechanism casing. The device is prepared for verification of concordance of the phase with fibre optics. It can be combined with the crosspiece with capacitive insulators. This is a mechanical device which does not allow the unit door to be opened with the earthing switch open. 5 Crosspiece with insulators 7 Earthing switch This can be supplied to complete the switchgear in the versions with pole insulators or, alternatively, with pole capacitive insulators. Should voltage indicator lamps be requested on the cable side, it is necessary to install a crosspiece with capacitive insulators. The crosspiece is always present in the versions fitted with fuses. This is fitted with: transmission; interlock; auxiliary contacts: two closing or opening contacts. The spaced earthing switch is standard for: SHS2/T2F, SHS2/ T2MF, SHS2/T2MF/N, SHS2/IF, SHS2/ES. In the SHS2/IB isolator, the earthing switch with making capacity (62.5 kap) is available. 11
14 3. Accessories 8 Contact signalling fuse blown 10 Field diffusers When a fuse blows, special kinematics activate a signalling contact. The kit includes three field diffusers to be applied to the end of the busbars in correspondence with the switchgear closure sheet. The kit is optional and assembly is by the customer. The kit must be used, for insulation reasons, in 375 mm units (should the switchgear manufacturer not provide alternative solutions). This solution is already used in ABB UniMix switchgear and application of the kit requires a busbar cross-section similar to that of the UniMix switchgear. 9 Adapters for fuses DIN e The kit includes all the accessories needed to adapt and mount three fuses according to DIN Standards with dimension e less than 442 mm. Different adapters are available for 292 mm and 192 mm fuses. 12
15 11 Retrofit Kit 13 Two-level pressure switch The kit includes the lateral supports to be assembled on the stainless steel structure to allow fixing in panels built for SHS2 switch-disconnectors and isolators of the first series. With regard to the auxiliary electrical connections, it is necessary to carry out the panel retrofit according to the electric circuit diagrams, available on request. The device allows the internal pressure of the SHS2 switchdisconnector to be monitored. There are two contacts in the device which allow the operating pressure (contact 1) and the minimum pressure below which operation is not guaranteed (contact 2). 12 Gas topping up valve The SHS2 switch-disconnector is sealed and has a life of 30 years. In the case of extraordinary maintenance, topping up of the SF6 gas is done through the front valve. 13
16 4. Types Available Switch-disconnectors SHS2/T1, SHS2/T1/N: three-position switch-disconnector with manual operating mechanism on exceeding dead centre. It is normally used for incoming/outgoing units. (Fig. 1). SHS2/T2, SHS2/T2/N: three-position switch-disconnector with manual stored energy operating mechanism. It is normally used for incoming/outgoing units and can be fitted with a shunt opening release. (Fig. 1). SHS2/T2F, SHS2/T2F/N: three position switchdisconnector with manual stored energy operating mechanism, fuse-holder frame, release device for fuse blown, and earthing switch on the load side of the fuseholder frame. It is normally used to make transformer protection units and can be fitted with a shunt opening release (Fig. 2). SHS2/T1M, SHS2/T1M/N: three-position switchdisconnector with motor operator. It is normally used to make incoming/outgoing units (Fig. 1). SHS2/T2M, SHS2/T2M/N: switch-disconnector with three positions with stored energy motor operator. It is normally used to make incoming/outgoing units and can be fitted with a shunt opening release (Fig. 1). SHS2/T2MF, SHS2/T2MF/N: switch-disconnector with three positions with stored energy motor operator, fuseholder frame, release device for fuse blowing and earthing switch on the load side of the fuse-holder frame. It is normally used to make transformer protection units and can be fitted with a shunt opening release (Fig. 2). SHS2/T1 SHS2/T2 SHS2/T1/N SHS2/T2/N SHS2/T1M SHS2/T1M/N SHS2/T2M SHS2/ T2M/N Fig. 1 - UniMix P3 14
17 Isolators SHS2/I, SHS2/I/N: three-position line-side isolator with manual operating mechanism with dependent operation. It is normally used for incoming/outgoing units (Fig. 3). SHS2/IF: three-position line-side isolator with fuse-holder frame and earthing switch on the load side of the fuseholder frame, both with manual operating mechanism with dependent operation. It is normally used for measurement units (Fig. 4). SHS2/IB: three-position line-side isolator and spaced earthing switch, interlocked, with manual operating mechanism with dependent operation. It is normally used for incoming/outgoing units with fixed circuit-breakers (Fig. 5). The spaced earthing switch can be assembled to allow the use of fixed circuit-breakers with current sensors on board (standard version), or can be assembled for use of current transformers according to DIN Standards, installed in switchgear. SHS2/A: earthing switch upended with three positions and spaced earthing switch, interlocked with manual operating mechanism with dependent operation. It is normally used to make an incoming unit with fixed circuit-breaker (Fig. 6). Earthing switches SHS2/T2F SHS2/T2F/N SHS2/T2F SHS2/T2MF/N SHS2/I SHS2/I/N SHS2/ES: earthing switch with manual operating mechanism with independent operation. It is normally used for incoming/ outgoing units (Fig. 7). It has making capacity up to 62.5 kap. Fig. 2 - UniMix P2 Fig. 3 - UniMix ASR 15
18 4. Types Available SHS2/IF SHS2/IB HD4/UniMix-F VD4/UniMix-F SHS2/A Fig. 4 - UniMix M Fig. 5 - UniMix P1F Fig. 6 - UniMix P1A Fig. 7 - UniMix A 16
19 Type Dimensions U [kv] In [A] Icw [ka] Unit Width UniMix SHS2/T vcd ,5 500 P3 SHS2/T vcd P3 SHS2/T vcd P3 SHS2/T vcd P3 SHS2/T vcd P3 SHS2/T1/N vcd ,5 375 P3 SHS2/T1/N vcd P3 SHS2/T1/N vcd P3 SHS2/T1/N vcd P3 SHS2/T1/N vcd P3 SHS2/T vcd ,5 500 P3 SHS2/T vcd P3 SHS2/T vcd P3 SHS2/T vcd P3 SHS2/T vcd P3 SHS2/T2/N vcd ,5 375 P3 SHS2/T2/N vcd P3 SHS2/T2/N vcd P3 SHS2/T2/N vcd P3 SHS2/T2/N vcd P3 SHS2/T2F vcd ,5 500 P2 SHS2/T2F vcd P2 SHS2/T2F vcd P2 SHS2/T2F vcd P2 SHS2/T2F vcd P2 SHS2/T2F/N vcd ,5 375 P2 SHS2/T2F/N vcd P2 SHS2/T2F/N vcd P2 SHS2/T2F/N vcd P2 SHS2/T2F/N vcd P2 SHS2/T1M vcd ,5 500 P3 SHS2/T1M vcd P3 SHS2/T1M vcd P3 SHS2/T1M vcd P3 SHS2/T1M vcd P3 SHS2/T1M/N vcd ,5 375 P3 SHS2/T1M/N vcd P3 SHS2/T1M/N vcd P3 SHS2/T1M/N vcd P3 SHS2/T1M/N vcd P3 SHS2/I vcd ,5 500 ASR SHS2/I vcd ASR SHS2/I vcd ASR SHS2/I vcd ASR SHS2/I vcd ASR SHS2/I/N vcd ,5 500 ASR SHS2/I/N vcd ASR SHS2/I/N vcd ASR SHS2/I/N vcd ASR SHS2/I/N vcd ASR Unit UniMix 17
20 4. Types Available Type Dimensions U [kv] In [A] Icw [ka] Unit Width UniMix SHS2/IF vcd ,5 500 M SHS2/IF vcd M SHS2/IF vcd M SHS2/IF vcd M SHS2/IF vcd M SHS2/T2M VCD ,5 500 P3 SHS2/T2M VCD P3 SHS2/T2M VCD P3 SHS2/T2M VCD P3 SHS2/T2M VCD P3 SHS2/T2M/N VCD ,5 375 P3 SHS2/T2M/N VCD P3 SHS2/T2M/N VCD P3 SHS2/T2M/N VCD P3 SHS2/T2M/N VCD P3 SHS2/T2M/F VCD ,5 500 P3 SHS2/T2M/F VCD P3 SHS2/T2M/F VCD P3 SHS2/T2M/F VCD P3 SHS2/T2M/F VCD P3 SHS2/T2MF/N VCD ,5 375 P2 SHS2/T2MF/N VCD P2 SHS2/T2MF/N VCD P2 SHS2/T2MF/N VCD P2 SHS2/T2MF/N VCD P2 SHS2/IB VCD ,5 750 P1F SHS2/IB VCD P1F SHS2/IB VCD P1F SHS2/IB VCD P1F SHS2/IB VCD P1F SHS2/IB kit 2CT 1VCD ,5 750 P1F SHS2/IB kit 2CT 1VCD P1F SHS2/IB kit 2CT 1VCD P1F SHS2/IB kit 2CT 1VCD P1F SHS2/IB kit 2CT 1VCD P1F SHS2/IB kit 3CT 1VCD ,5 750 P1F SHS2/IB kit 3CT 1VCD P1F SHS2/IB kit 3CT 1VCD P1F SHS2/IB kit 3CT 1VCD P1F SHS2/IB kit 3CT 1VCD P1F SHS2/ES VCD ,5 500 A SHS2/ES VCD A SHS2/ES VCD A SHS2/ES VCD < A SHS2/A VCD ,5 750 P1A SHS2/A VCD P1A SHS2/A VCD P1A Unit UniMix 18
21 Switch-disconnectors approved by Enel Can only be ordered together with a complete UniMix unit in the fixed configuration and with the accessories indicated below. Mix-L: three-position switch-disconnector with manual operating mechanism on exceeding dead centre, with operation independent of the operator. It is normally used to make 1L type units according to DY803/1 and DY 803/116. Mix-T: three-position switch-disconnector with manual stored energy operating mechanism, with operation independent of the operator, fuse-holder frame, release device for fuse blown, earthing switch on the load side of the fuse-holder frame. It is normally used to make 1T type units according to DY803/2 and DY 803/216. Mix-U: three-position switch-disconnector with manual operating mechanism on exceeding dead centre and spaced earthing switch, both with operation independent of the operator. It is normally used to make 1UT type units according to DY803/3 and DY 803/316. Mix-LM: three-position switch-disconnector with motor operator (24 V DC auxiliary voltage) on exceeding dead centre. It is normally used to make 1LE type units according to DY803/4 and DY 803/416. Type Standardised unit table U [kv] In [A] Icw [ka] Mix-L DY 803/ ,5 Mix-L DY 803/ Mix-T DY 803/ ,5 Mix-T DY 803/ Mix-U DY 803/ ,5 Mix-U DY 803/ Mix-Lm DY 803/ ,5 Mix-Lm DY 803/ IMS-ST IMS-ST1 IMS-ST1 ST2 ST2 MIX - L MIX - T MIX - U MIX - LM 19
22 5. Overall dimensions The SHS2 switch-disconnectors and isolators have been designed with a 230 mm pole centre distance. As an example, the figure shows the dimensions of the SHS2/T1 type of switch-disconnector. The overall dimensions of the different apparatus are available on request. For detailed information and other types of apparatus, please contact us. SHS2/.../N for units 375 mm wide 20
23 SHS2 for units 500 mm wide 21
24 6. Fuses Three fuses for transformer protection can be connected in series with the SHS2 switch-disconnector, with dimensional characteristics complying with DIN Standards. The fuse striker must have the force and run shown in the diagram. Selection of the fuse according to the voltage and power of the transformer must be made in conformity with the data indicated in the table. F (N) F = Striker force. S = Striker run S (mm) Transformer protection and selection of fuses When the isolators are used to control and protect transformers, they are fitted with a particular type of currentlimiting fuses which guarantee selectivity with other protection devices and can take the high transformer connection currents without deteriorating. In this case, protection against overcurrents on the medium voltage side of the transformer is not indispensable since this task is carried out by the protection provided on the low voltage side. The protection on the medium voltage side can be entrusted just to the fuse, which must be selected taking into account the no-load connection current, which can take on values equal to or higher than 10 times the rated current according to the power of the transformer and to the type of laminations used (hot laminated or with orientated crystals). There is the maximum connection current when circuitbreaker closing takes place corresponding to the voltage passing through zero. A further result to be guaranteed is protection against faults in the low voltage winding and in the stretch of the connection from this to the circuit-breaker positioned on the secondary, avoiding the use of fuses with rated current which is too high, in order to ensure tripping within a short time even under these fault conditions. 22
25 A rapid check of the short-circuit current at the secondary terminals of the transformer and on the supply side of the circuit-breaker on the secondary - if placed at a significant distance, allows the trip time to be verified on the fuse blowing curve. The usage table given below takes both the required conditions into account, i.e. sufficiently high rated current to avoid untimely fuse blowing during the no-load connection stage and, in any case, of a value which guarantees protection of the machine against faults on the low voltage side. Table for selecting fuses for transformer protection (*) Un network (kv) Rated power of the transformer (kva) Rated normal current of the fuse IN (A) (*) ABB CEF type fuses. Increases in the rated normal current of the fuses must be foreseen in the case of transformer overload or in the case of ambient temperature higher than 40 C. 23
26 7. Electric circuit diagram SHS2/T1 electric circuit diagram Control circuit of the switch-disconnector (24 V DC) Control circuit of the switch-disconnector ( V DC 110 V AC) Continues on page 25 24
27 SHS2/T1 electric circuit diagram Control circuit of the switch-disconnector ( V DC 110 V AC) Control circuit of the switch-disconnector (220 V DC / V ac) Continues on page 26 25
28 7. Electric circuit diagram SHS2/T1 electric circuit diagram Control circuit of the switch-disconnector (220 V DC 220 V AC) Circuit of the shunt opening release (see note C) 26
29 SHS2/T2 electric circuit diagram Circuit of the closing motor Circuit of the shunt opening release 27
30 7. Electric circuit diagram SHS2/T1 - SHS2/T1M - SHS2/N-T1 - SHS2/N-T1M electric circuit diagram Control circuit of the switch-disconnector Switch-disconnector and earthing switch auxiliary contacts 28
31 Circuit for indication of voltage present busbars and line SHS2/T4 electric circuit diagram Auxiliary contacts of the earthing switch 29
32 7. Electric circuit diagram Auxiliary contacts of the isolator (see note C), for the SHS2/T1, SHS2/T2 and SHS2/T3 type isolators. Circuit for indicating voltage present on the line for the SHS2/T1, SHS2/T2, SHS2/T3 and SHS2/T4 isolators 30
33 Circuit for signalling voltage present on the earth for the SHS2/T1 and SHS2/T3 isolators Circuit for signalling fuse blown for the SHS2/T1 and SHS2/ T2 isolators 31
34 7. Electric circuit diagram Note: To take development of the product into account it is, in any case, always useful to refer to the electric circuit diagram provided with each circuit-breaker. State of operation shown The diagram is shown under the following conditions: switch-disconnector open earthing switch open circuits de-energised. Caption = Number of diagram figure * = See the note indicated by the letter A1 = Switch-disconnector operating mechanism applications A4 = Switchgear applications (indicative apparatus and connections for operating mechanism and signals) AK = Switch-disconnector auxiliary circuit diagram -B80/1 2 = Earthing switch position contact -B80/L = Position contact open during manual operation of earthing switch -Q80 -B80-90/1 2 = Position contact open during manual operation of earthing switch -Q80 and during manual operation of the switch-disconnector -B90/1 3 = Switch-disconnector position contacts -B90/C = Position contact open with switch-disconnector closed -B90/E = Contact activated by the key lock -B90/L = Position contact open during manual operation of switch-disconnector Q90 -B90/O = Position contact open with the switch-disconnector open -BE7 = Position contact open during manual operation of the earthing switch -BF = Contact signalling medium voltage fuse blown -BI1...4 = Position contact open with switch-disconnector closed -BI2...5 = Position contact open with switch-disconnector open -BI7 = Position contact open during manual operation of the switch-disconnector BI = Position contacts open with switch-disconnector BI = Position contacts of the switch-disconnector BI413 = Earthing switch position contacts BI = Line earth-open position contacts BI = Earthing switch-qe position contacts -BK = Contact activated by the key lock -BU1...3 = Capacitive dividers located on phases L1, L2, L3 of the line -BU1...6 = Capacitive dividers located on phases L1, L2, L3 -BU4...6 = Capacitive dividers located on phases L1, L2, L3 of the busbars -C1/L1...L3 = Capacitive dividers located on phases L1, L2, L3 of the line -C2/L1...L3 = Capacitive dividers located on phases L1, L2, L3 of the busbars -F1 -F3 = Medium voltage fuses -FF1 3 = Medium voltage fuses -KC = Auxiliary relay for closing the switch-disconnector -KO = Auxiliary relay for opening the switch-disconnector -KD = Auxiliary relay for with two contacts delayed at attraction and two instantaneous contacts -MI4 = Motor for operating the switch-disconnector -MM = Motor for operating the switch-disconnector -MO = Shunt opening release (see note C) -MS = Motor for operating the switch-disconnector -PGN = Lamp for signalling switch-disconnector open -PRD = Lamp for signalling switch-disconnector closed -PU1...2 = Voltage indicator located on phases L1, L2, L3 of the line/busbars -PUD1 -PUD2 = Voltage indicator located on the line = Voltage indicator located on the busbars -Q80 = Earthing switch -Q90 = Switch-disconnector -QE -QI4 -RR1 2 -S75F -SC -SO -SS -TR -TR1 2 = Earthing switch = Switch-disconnector = Suppressors of transients = Contact signalling medium voltage fuse blown = Pushbutton for local switch-disconnector closing = Pushbutton for local switch-disconnector opening = Local/remote selector = Converter = Rectifier -X = Interface connector with the feeder (outside the unit) -X1 -X3 -XB1 -XB2 XB XB93 = Terminal boxes of the operating mechanism applications = Terminal boxes for the switch-disconnector auxiliary circuits = Terminal boxes for the circuits inside the switchdisconnector = Terminal boxes of the operating mechanism applications = Terminal boxes of operating mechanism application 32
35 Graphic symbols for electrical diagrams (IEC and CEI Standards) Delayed movement Three conductors Make contact Interruttore di manovra-sezionatore a doppia interruzione Mechanical interlock between two pieces of apparatus Connection of conductors Break contact Control coil (general symbol) Rotary handle operating mechanism Socket and plug (female and male) Closing position contact (limit switch) Control coil of a relay with delay on attraction Pushbutton operating mechanism U Resistor depending on the voltage, varistor Opening position contact (limit switch) Lamp (general symbol) Electric motor operator Motor (general symbol) Isolator Capacitive divider M M Earth (general symbol) Rectifier with two half-waves (with bridge) Switch-disconnector 33
36 8. Switchgear applications The SHS2 switch-disconnectors and isolators have mechanical, electrical and layout characteristics ideal for constructing medium voltage metal-enclosed type switchgear for secondary distribution substations. They can be used in standard or arc-proof version units. ABB is able to offer all the apparatus and components needed to complete the switchgear units. Please contact us for further detailed information. SHS2 switch-disconnector. Complete with fuse-holder frame and earthing switch on load side of the fuses. SHS2 isolator. Complete with earthing switch on load side of the circuit-breaker. Example of unit with switch-disconnector and fuses PR521and REF601 switchgear protection devices These are provided on board the HD4/R and VD4/R circuitbreakers combined with current sensors of dedicated type. The REF601 CEI 0-16 version is also available, specially made to comply with CEI 0-16 standards. For further information, please contact us. Circuit-breakers Both the HD4/R series SF6 gas insulated medium voltage circuitbreaker and the VD4/R vacuum circuitbreaker, with right lateral operating Fuses Fuses according to DIN Standards are available to be combined with the SHS2 apparatus. 34
37 REF542plus microprocessor-based unit The REF542plus unit carries out integration of all the secondary functions relative to a switchgear unit. PR512 switchgear protection devices The PR512 are devices of the self-supplied type and ensure complete protection of the installation without an auxiliary power supply. Voltage transformers The voltage transformers are of the resin insulated type. They comply with the IEC Standards. Their dimensions are normally according to DIN Standards. Current transformers The current transformers are of the resin insulated type. They comply with the IEC Standards. Their dimensions are normally according to DIN Standards. Toroidal cable type transformers are also available. mechanism and 230 mm pole centre distance, are available to make units with a circuit-breaker. Example of unit with circuit-breaker. Combined voltagecurrent sensors A range of sensors is available which optimally covers the characteristics of new generations of instruments and of the REF542plus unit in particular. The current sensors conform with the IEC (CDV) Standard, the voltage sensors with the IEC Standard. Their dimensions are according to DIN Standards. 35
38 Notes 36
39
40 Contact us ABB S.p.A. Power Products Division Unità Operativa Sace-MV Via Friuli, 4 I Dalmine Tel.: Fax: sacetms.tipm@it.abb.com The data and illustrations are not binding. We reserve the right to make changes without notice in the course of technical development of the product. Copyright 2010 ABB. All rights reserved. 1VCP Rev. F, en - Technical catalogue (SHS2) (gs) a
DISTRIBUTION SOLUTIONS. GSec Gas-insulated switching and isolating apparatus
DISTRIBUTION SOLUTIONS GSec Gas-insulated switching and isolating apparatus GSec is a three-position SF6 gas-insulated switchdisconnector designed for use in medium voltage switchgear for secondary distribution
More informationMedium voltage products HD4/R MV gas circuit-breakers for secondary distribution. Power and productivity for a better world TM
Medium voltage products HD4/R MV gas circuit-breakers for secondary distribution Power and productivity for a better world TM Table of contents 4 1. Description 9 2. How to choose and order the circuit-breakers
More informationVD4/R. Medium Voltage vacuum circuit-breakers for secondary distribution
VD4/R Medium Voltage vacuum circuit-breakers for secondary distribution DESCRIPTION CIRCUIT-BREAKER SELECTION AND ORDERING SPECIFIC PRODUCT CHARACTERISTICS OVERALL DIMENSIONS ELECTRIC CIRCUIT DIAGRAM
More informationGeneral. Main electric circuits Fuses compartment Operating mechanisms Cables connection compartment
General The switchgear must be suitable for 36 kv rated voltage and specifically conceived for the secondary distribution substations in M.V. with either ring or radial type networks. The switchgear must
More informationMESG 12 / 17.5 / 24 / 36 KV
MESG 12 / 17.5 / 24 / 36 KV Medium Voltage Air Insulated Metal Enclosed Switchgear up to 36 kv- up to 1250 A - up to 25 ka for 1 sec. with SF6 or vacuum circuit breakers. 750 METAL ENCLOSED 1 1 ) GENERAL
More informationPowerCube type PB. Pre-assembled modules and enclosures for constructing medium voltage switchgear
PowerCube type PB Pre-assembled modules and enclosures for constructing medium voltage switchgear GENERAL CHARACTERISTICS MAIN COMPONENTS TYPES AVAILABLE AND APPARATUS OVERALL DIMENSIONS AND WEIGHTS ELECTRIC
More informationAIR INSULATED METAL ENCLOSED SWITCHGEAR AND CONTROLGEAR
AIR INSULATED METAL ENCLOSED SWITCHGEAR AND CONTROLGEAR ANGLER SWITCHING DEVICES CONTENTS 1. General 2. Switchgear Types - Switch Disconnector - Disconnector 3. Cubicle Types - Cubicle with Switch Disconnector
More informationVmax Medium voltage vacuum circuit-breakers. IEC: kv; A; ka ANSI: kv; A; ka
Medium voltage products Vmax Medium voltage vacuum circuit-breakers IEC:... 17.5 kv;... 1250 A;... 31.5 ka ANSI:... 15 kv;... 1200 A;... 31.5 ka The new Vmax circuit-breakers are the synthesis of ABB s
More informationHD4. Gas insulated MV circuit-breakers kv A ka
HD4 Gas insulated MV circuit-breakers 12... 40.5 kv - 630... 3600 A - 16... 50 ka DESCRIPTION CIRCUIT-BREAKER SELECTION AND ORDERING CBE ENCLOSURE SELECTION AND ORDERING CBF FIXED PART SELECTION AND ORDERING
More information24kV Medium Voltage Switchgear Metal-Enclosed (LSC2A)
M6 24kV Medium Voltage Switchgear MetalEnclosed (LSC2A) GENERAL FEATURES GENERAL DESCRIPTION The structure of the cubicles, of considerable strength, has selfsupporting structure and is made of steel sheet
More informationVD4 Installation and service instructions kv A ka
Medium voltage products VD4 Installation and service instructions 12... 36 kv - 630... 3150 A - 16... 50 ka Index For your safety! 1 I. Introduction 2 II. Programme for environmental protection 2 1. Packing
More informationMEDIUM VOLTAGE PRODUCTS. Powerbloc Pre-assembled modules for building medium voltage switchgear
MEDIUM VOLTAGE PRODUCTS Powerbloc Pre-assembled modules for building medium voltage switchgear Powerbloc are the ideal solution for replacing fixed circuit breakers with withdrawable circuit breakers,
More informationMedium voltage products UniSec DY800 New 24 kv air-insulated medium voltage switchgear to e-distribuzione specifications
Medium voltage products UniSec Y800 New 24 kv air-insulated medium voltage switchgear to e-istribuzione specifications UniSec Y800 ubicles available Unit e-istribuzione specifications (Ed. 4) UniSec IS/1
More informationAIR INSULATED EXTENDABLE SWITCHGEAR UP TO 12KV GUIDE
AIR INSULATED EXTENDABLE SWITCHGEAR UP TO 12KV GUIDE Certificate Number FM35831 APPLICATION Typical Uses and Classification The MSGair switchgear is used in transformer and switching substations mainly
More informationVD4/R - VD4/L - VD4/UniAir - VD4/UniMix
VD4/R - VD4/L - VD4/UniAir - VD4/UniMix Installation and maintenance instructions 12... 24 kv - 630... 1250 A - 12... 25 ka 1 For your safety! Make sure that the installation room (spaces, divisions and
More informationSafeLink The Ultimate RMU. Rex de Bruyn PTMV New Zealand. ABB Ltd - Page 1 ABB
Rex de Bruyn PTMV New Zealand SafeLink The Ultimate RMU Ltd - Page 1 TheSafe Range of Ring Main Switchgear SafeLink : 12kV Compact Fuse Technology SafeRing : 12-24kV Fuse & Circuit Breaker Technology SafePlus
More informationVD4/R. MV vacuum circuit-breakers for secondary distribution
VD4/R MV vacuum circuit-breakers for secondary distribution DESCRIPTION CIRCUIT-BREAKER SELECTION AND ORDERING SPECIFIC PRODUCT CHARACTERISTICS OVERALL DIMENSIONS ELECTRIC CIRCUIT DIAGRAM 3 9 21 41 45
More informationPowerCube type PB series A complete solution for OEMs
Preliminare july 2006 series A complete solution for OEMs IndustrialIT TM ABB PT Dalmine 1VCP000093 Rev.C, it Presentation 2004.07 QUALITY SYSTEM Certification ISO 9001-2000 ENVIRONMENTAL MANAGEMENT SYSTEM
More informationSYSclad switchboard equipped with draw out type vacuum circuit breaker closed dooroperationoperation. SYSclad 12 17,5kV A.
SYSclad switchboard equipped with draw out type vacuum circuit breaker closed dooroperationoperation 630 3150A SYSclad 12 17,5kV 16 31,5kA Generalities SYSclad is a medium voltage switchboard metal clad
More informationAir-insulated switchgear UniGear type ZS1
Air-insulated switchgear UniGear type ZS1 ABB Power Technologies / 1-7074 D 12-03-2003 - Air-insulated switchgear UniGear type ZS1 ABB Power Technologies / 2-7075 D 1 2-03-2003 - Rated voltage kv 12 17.5
More informationMetal Clad Switchgears
SNC Series Metal Clad Switchgears > up to 36 kv Rated Voltage > up to 2500 A Rated Current > up to 40 ka Rated Short Time Withstand Current > LSC-2B, PM, AFLR > In Confirmity with IEC 62271-1, 100, 102,
More informationPIX-H Metal-clad switchgear up to 17.5kV
AIR INSULATED SWITCHGEAR PIX-H Metal-clad switchgear up to 17.5kV for high rated applications Technical Specifications AREVA T&D Summary - Technical description... 3 - Standards... 6 - PIX in detail...
More informationabb SafeLink SF 6 Insulated Ring Main Unit Installation and Operating Instructions Switchgear Division Auckland, New Zealand SLMIO ver 2.
Installation and Operating Instructions Switchgear Division Auckland, New Zealand SLMIO ver 2.12 Product Overview ABB's type-tested ring main unit (RMU) is an SF 6 insulated RMU utilising the latest developments
More informationHigh voltage products PASS M0S 252 kv Innovative solution for transmission substation up to 252 kv
High voltage products PASS M0S 252 kv Innovative solution for transmission substation up to 252 kv PASS M0S 252 kv Innovation In today s market, the HV substation is increasingly becoming a key element
More informationHD4. Gas insulated MV circuit-breakers kv A ka
HD4 Gas insulated MV circuit-breakers 12... 40.5 kv - 630... 3600 A - 16... 50 ka DESCRIPTION CIRCUIT-BREAKER SELECTION AND ORDERING CBE ENCLOSURE SELECTION AND ORDERING CBF FIXED PART SELECTION AND ORDERING
More informationMCset 4-24 kv Withdrawable SF6 circuit breaker
Medium Voltage switchgear MCset 4-24 kv Withdrawable SF6 circuit breaker Instruction for use Contents General 2 Glossary 2 Symbols 2 Recommendations 3 General description 4 AD4 unit 4 AD4 unit with toroidal
More informationPower IT Air Insulated Cubicle Uniswitch
- 1-4/2/2003 Secondary Distribution Switchgear Power IT Air Insulated Cubicle Uniswitch Table of Contents Market segment Ratings New for 2003 Technical features Advantages Market segment Uniswitch Switchgear
More informationMedium voltage products HD4/R - HD4/RE MV gas circuit-breakers for secondary distribution. Power and productivity for a better world TM
Medium voltage products HD4/R - HD4/RE MV gas circuit-breakers for secondary distribution Power and productivity for a better world TM Table of contents 4 1. Description 11 2. How to choose and order
More informationATR-MIX. METAL ENCLOSED SWITCHGEAR kV A ka
ATR-MIX METAL ENCLOSED SWITCHGEAR 12-24-36kV 630-1250 A 16-20-25 ka INDICE 01 GENERAL DESCRIPTION TECHNICAL DATA UNIT TYPES TYPICAL UNITS - ATR 01 TYPICAL UNITS - ATR 02 TYPICAL UNITS - ATR 03 TYPICAL
More informationCPG.1 Gas insulated, single busbar cubicle range Up to 27 kv / 2000 A / 31.5 ka Up to 38 kv / 2000 A / 31.5 ka IEEE Standards
Medium Voltage Switchgear Primary Distribution CPG.1 Gas insulated, single busbar cubicle range Up to 27 kv / 2000 A / 31.5 ka General description Presentation Ormazabal s CPG System includes the CPG.1
More informationOVERVIEW DESCRIPTION AND CHARACTERISTICS APPARATUS AND TYPES AVAILABLE SWITCHGEAR CHARACTERISTICS INSTRUMENT TRANSFORMERS MEASUREMENT SENSORS
OVERVIEW DESCRIPTION AND CHARACTERISTICS APPARATUS AND TYPES AVAILABLE SWITCHGEAR CHARACTERISTICS INSTRUMENT TRANSFORMERS MEASUREMENT SENSORS PROTECTION AGAINST INTERNAL ARCS TYPICAL UNITS 3 Characteristics
More informationSwitchgear Type SIMOSEC, up to 24 kv, Air-Insulated, Extendable
www.siemens.com/medium-voltage-switchgear Switchgear Type SIMOSEC, up to 24 kv, Air-Insulated, Extendable Medium-Voltage Switchgear Catalog HA 41.43 2012 Answers for infrastructure and cities. Neue Bilder
More informationAir-insulated medium-voltage secondary distribution switchgear
DISTRIBUTION SOLUTIONS UniSec for solar applications Air-insulated medium-voltage secondary distribution switchgear Safe, tested application Complete, compact solution Can be installed in containers UniSec
More informationDPX moulded case circuit breakers
BREAKING AND PROTECTION DEVICES 10 / 2011 DPX moulded case circuit breakers DPX moulded case circuit breakers offer optimum solutions for the protection requirements of commercial and industrial installations.
More informationCatalog HA Edition up to 24 kv, Air-Insulated, Extendable. Medium-Voltage Switchgear. siemens.com/simosec
Catalog HA 41.43 Edition 2018 Switchgear Type SIMOSEC, up to 24 kv, Air-Insulated, Extendable Medium-Voltage Switchgear siemens.com/simosec Application Typical uses R-HA41-135.tif R-HA40-112.tif R-HA41-115.tif
More informationMedium Voltage Products. VD4 Medium voltage vacuum circuit-breaker 12 kv A - 63 ka 36/40.5 kv A ka
Medium Voltage Products VD4 Medium voltage vacuum circuit-breaker 12 kv - 1250 4000 A - 63 ka 36/40.5 kv - 630 3150 A - 16 40 ka DESCRIPTION CIRCUIT-BREAKER SELECTION AND ORDERING SPECIFIC PRODUCT CHARACTERISTICS
More informationCPG.0 Single busbar gas-insulated cubicles
MV Switchgear Primary Distribution CPG.0 Single busbar gas-insulated cubicles Up to 36 kv CPG System The quality of products designed, manufactured and installed by Ormazabal is underpinned by the implementation
More informationOutdoor live tank SF 6. circuit breaker Type OHB for 24/36/40.5 kv applications
Outdoor live tank SF 6 circuit breaker Type OHB for 24/36/40.5 kv applications ABB a global leader ABB is a global leader in Power and Automation technologies that enable utility and industry customers
More informationProduct catalogue. ABB AS, Power Products Division SF 6. -insulated Ring Main Unit, SafeRing 36 and -insulated Compact Switchgear SafePlus 36
Product catalogue ABB AS, Power Products Division SF 6 -insulated Ring Main Unit, SafeRing 36 and SF 6 -insulated Compact Switchgear SafePlus 36 Content Applications SafeRing 36... 3 Applications SafePlus
More informationExtract of the technical catalogue SACE Tmax XT New low voltage molded-case circuit breakers up to 250A
Extract of the technical catalogue - 20.10 SACE Tmax XT New low voltage molded-case circuit breakers up to 250A Circuit breakers for power distribution Main characteristics SACE Tmax XT molded-case circuit
More informationMV Air Insulated Switchgear TAP17. Technical Data TGOOD
MV Air Insulated Switchgear TAP17 Technical Data TGOOD 2017.1 Operating environmental conditions Place of installation: Indoor or outdoor Ambient temperature: 25 ~ +40 (higher or lower temperature optional)
More informationB kv Gas-insulated Substations
72.5 145 kv Gas-insulated Substations The increasing demand for electrical power in cities and industrial centres requires the installation of a compact and efficient distribution and transmission network.
More informationGas Insulated Metal-clad Switchgear, HMGS!
Medium Voltage HMGS-G10 HYUNDAI Medium Voltage Gas Insulated Metal-clad Switchgear, HMGS! SF6 Gas Insulated Metal-clad Switchgear is an integrated assembly of vacuum circuit breaker, 3-position switch,
More informationSwitchgear Type SIMOSEC, up to 24 kv, Air-Insulated, Extendable
Switchgear Type SIMOSEC, up to 24 kv, Air-Insulated, Extendable Medium-Voltage Switchgear Totally Integrated Power SIMOSEC Catalog HA 41.43 Edition Sept. 2014 Answers for infrastructure and cities. Neue
More informationTGI Vacuum Circuit-Breaker Air isolator Earthing switch
TGI Vacuum Circuit-Breaker Air isolator Earthing switch PATENT Versatile Visible isolation Simple Removable Index 3 in 1 2 Simple and versatile 4 Operations sequence ON Commissioning 8 Operations sequence
More informationCircuit breakers for power distribution A1 Ordering information
Circuit breakers for power distribution A1 Ordering information A1 100A - Fixed (F) 1 pole - Front terminals (F) Thermomagnetic trip unit - TMF Icu (240 V) In I3 A (10kA) N (18kA) 15 400 A1A015TW-1 A1N015TW-1
More informationSF 6. -insulated Ring Main Unit, SafeRing 36 and -insulated Compact Switchgear SafePlus kv ABB
- Ring Main Unit, SafeRing 36 and - Compact Switchgear SafePlus 36 36 kv Contents 1. Contents 1. Application... 3 1.1 Applications SafeRing... 3 1.2 Applications SafePlus... 5 2. Design Philosophy... 7
More informationUniSec Maintenance solutions
DISTRIBUTION SOLUTIONS UniSec Maintenance solutions ABB supports you to improve the reliability, safety and efficiency of your electrical equipment UniSec Maintenance solutions Table of contents 004 00
More informationFixed-Mounted Circuit-Breaker Switchgear Type NXPLUS C up to 24 kv, SF 6 -Insulated. Medium-Voltage Switchgear Catalog HA 35.
Fixed-Mounted Circuit-Breaker Switchgear Type NXPLUS C up to kv, SF 6 -Insulated Medium-Voltage Switchgear Catalog HA 5. 00 Invalid: Catalog HA 5. 00 R-HA5-05 eps Fixed-Mounted Circuit-Breaker Switchgear
More informationSwitchgear Type 8DJH for Secondary Distribution Systems up to 24 kv, Gas-Insulated
Switchgear Type 8DJH for Secondary Distribution Systems up to 24 kv, Gas-Insulated Medium-Voltage Switchgear Catalog HA 40.2 2009 Answers for energy. -HA40-111.eps -HA40-110.eps -HA40-109.eps -HA40-112.eps
More informationVD4. Installation and service instructions kv A ka
VD4 Installation and service instructions 12... 24 kv - 630... 2500 A - 16... 31.5 ka For your safety! Make sure that the installation room (spaces, divisions and ambient) is suitable for the electrical
More informationCGMCOSMOS. Reliable innovation. Personal solutions. Fully gas insulated modular and compact (RMU)system.
MV Switchgear for CGMCOSMOS Fully gas insulated modular and compact (RMU)system Up to 24 kv Up to 27 kv mediumvoltage mediumvoltageag AG Langackerstrasse Langackerstrasse 25 25 CH CH 6330 6330 Cham Cham
More informationUniGear. Technical Guide
UniGear Technical Guide CONTENTS 0 CONTENTS 1.1 Compartments 1/2 1.2 Components of the structure 1/3 1.2.1 Hot-galvanized steel sheet 1/3 1.2.2 Painted steel sheet 1/4 1.2.3 Copper 1/5 1.2.4 Insulating
More informationMedium-Voltage Switchgear
Medium-Voltage Switchgear Type SIMOSEC 12 up to 12 kv, Extendable, up to 1250 A Medium-Voltage Switchgear INSTALLATION AND OPERATING INSTRUCTIONS Order No.: 834-6001.9 Revision: 01 Issue: 21-09-2009 About
More informationTECHNICAL SPECIFICATION OF 11KV SF6 / VCB METAL ENCLOSED, INDOOR (PANEL TYPE) / OUTDOOR RING MAIN UNIT (RMU). (IEC standard equipment)
TECHNICAL SPECIFICATION OF 11KV SF6 / VCB METAL ENCLOSED, INDOOR (PANEL TYPE) / OUTDOOR RING MAIN UNIT (RMU). (IEC standard equipment) 1 SCOPE OF SUPPLY This specification covers design, manufacture, shop
More informationMedium voltage products. V-Contact VSC Medium voltage vacuum contactors
Medium voltage products V-Contact VSC Medium voltage vacuum contactors Index 4 1. Description 8 2. Contactor selection and ordering 18 3. Specific product characteristics 29 4. Overall dimensions 34 5.
More informationCOMPACT AND EXTENSIBLE RING MAIN UNIT. insulated Ring Main Unit with load break switch or integrated vacuum circuit breaker
DR-6/DT-6 COMPACT AND EXTENSIBLE RING MAIN UNIT BUILT TO LAST! DR-6/DT-6 Compact and/or extensible SF 6 insulated Ring Main Unit with load break switch or integrated vacuum circuit breaker SAFETY, RELIABILITY,
More information020: 2013 CEB SPECIFICATION MINIATURE CIRCUIT BREAKER (MCB)
020: 2013 CEB SPECIFICATION MINIATURE CIRCUIT BREAKER (MCB) CEYLON ELECTRICITY BOARD SRI LANKA Telephone: +94 11 232 0953 Fax: +94 11 232 3935 CONTENTS Page 1.0 Scope 3 2.0 System Parameters 3 3.0 Service
More informationAll rights reserved. Neither this catalogue nor any part of it may be copied using any method or for any purposes. Most studies are legally protected.
Issued: January 2013 Copyright by ZPUE Katowice S.A. All rights reserved. Neither this catalogue nor any part of it may be copied using any method or for any purposes. Most studies are legally protected.
More informationUnified requirements for systems with voltages above 1 kv up to 15 kv
(1991) (Rev.1 May 2001) (Rev.2 July 2003) (Rev.3 Feb 2015) (Corr.1 June 2018) Unified requirements for systems with voltages above 1 kv up to 15 kv 1. General 1.1 Field of application The following requirements
More informationFor your safety! Foreword
Medium voltage products UniSec DY800 in accordance with Enel specifications Installation, service and maintenance instructions for 24 kv prefabricated assemblies with arc-proof metal enclosures and multi-function
More informationNXPLUS C Single busbar. Maintenance-free for lifetime
NXPLUS C Single busbar Maintenance-free for lifetime Energy Distribution Welcome! Page 2 Content Overview Technical data Typicals Panel design Circuit-Breaker panel Busbar Operation Metering Low-voltage
More informationSWITCHGEAR FOR SERVICE UP TO 36kV (CABLE AND OVERHEAD CONDUCTOR CONNECTED)
PRODUCED BY THE OPERATIONS DIRECTORATE OF ENERGY NETWORKS ASSOCIATION Issue 3 2012 SWITCHGEAR FOR SERVICE UP TO 36kV (CABLE AND OVERHEAD CONDUCTOR CONNECTED) www.energynetworks.org 2012 Energy Networks
More informationSwitchgear Type 8DJH for Secondary Distribution Systems up to 24 kv, Gas-Insulated
Switchgear Type 8DJH for Secondary Distribution Systems up to 24 kv, Gas-Insulated Medium-Voltage Switchgear Catalog HA 40.2 2010 Answers for energy. -HA40-110.eps -HA40-109.eps -HA40-112.eps -HA40-111.eps
More information11kV Compact Switchgear. tec - range. Minimum to Zero SF6 Insulation Gas. Outec Controls
11kV Compact Switchgear tec - range Minimum to Zero SF6 Insulation Gas. Outec Controls 1 tec xx - 11kV Switchgear Contents 1 tec CB - SF6 Free Switchgear... 3 1.1 Description:... 3 1.2 1.3 Features the
More informationMedium Voltage Metal-Enclosed Switches
Medium Voltage Metal-Enclosed Switches Outdoor Medium Voltage Switch.1 Medium Voltage Switch MVS Product Description............................................. 2 Application Description..........................................
More informationVOLUME: IIIC SCHEDULE IIIC/4 11 KV AND 3.3 KV SWITCHGEARS
VOLUME: IIIC SCHEDULE IIIC/4 11 KV AND 3.3 KV SWITCHGEARS A. 11 KV SWITCHGEAR 1.0 SWITCHGEAR ASSEMBLY 1.1 Make : 1.2 Type : 1.3 Reference Standard : 1.4 Voltage (Nom./Max.) KV : 1.5 Phase, Frequency No,Hz.
More informationSafeGear Motor Control Center Arc Resistant Metal-Clad Construction Brochure
2017 SafeGear Motor Control Center Arc Resistant Metal-Clad Construction Brochure SafeGear Motor Control Center Arc resistant Metal-Clad construction Brochure Table of Contents 1. Description 1 1 2. SafeGear
More informationCP Automatic capacitor bank
CP 254 - Automatic capacitor bank STE-CP254_V2_général.doc Page 1 CP 254 - General presentation CP 254 is a range of MV capacitor banks designed to be used in electrical networks up to 36kV. The capacitor
More informationDMX 3 -I 2500 switch disconnectors
8704 LIMOGES Cedex Telephone : 0 0 87 87 Fax : 0 0 88 88 DMX 3 200 circuit breakers DMX 3 -I 200 switch disconnectors References: 0 28 20 / 21 / 22 / 23 / 24 / 2 / 2 / 30 / 31/ 32/ 33/ 34 / 3 / 3 / 40
More informationGE Consumer & Industrial Power Protection. New. SecoGear kV Metal-clad Switchgear. GE imagination at work
GE Consumer & Industrial Power Protection New SecoGear 12-24kV GE imagination at work General SecoGear metal-clad switchgear is designed and manufactured with advance technology and has been comprehensively
More informationI B D Q I B D Q O I B D Q O
Extension offer: new possible combinations 2 and 3 functions RM6 free combination: offers all types of configurations which fit to every application. Free choice: type of each functional unit. Free choice:
More informationMEDIUM VOLTAGE CE-B36 METAL CLAD SWITCHBOARDS. CE - B36 - C - en - REV
CE - B36 - C - en - REV.00 2011.9 EDIU VOLTAGE EDIU VOLTAGE APPLICATION CE-B etal Clad switchboards are designed for use in public and industrial distribution system up to 36kV for the operation and protection
More informationSF 6 gas insulated RMU SafePlus 24 kv. ABB SafePlus 24 kv SF6 gas insulated RMU 1
SF 6 gas insulated RMU SafePlus 24 kv 25.03.2010 SafePlus 24 kv SF6 gas insulated RMU 1 Secondary distribution 400 kv Transmission substation Transformer 40-70 kv 130 kv Main Substation Secondary distribution
More informationMEDIUM VOLTAGE CE-B METAL CLAD SWITCHBOARDS. CE - B - C - en - REV
MEDIUM VOLTAGE MEDIUM VOLTAGE APPLICATION CE-B Metal Clad switchboards are designed for use in public and industrial distribution system up to 24kV for the operation and protection of lines, generators,
More informationEd rev.0 CATALOGUE SWITCHGEAR 2015
Ed. 2015 rev.0 CATALOGUE SWITCHGEAR 2015 SV24NC GENERAL SV24NC voltage metal enclosed switchgears for indoor use are constructed by placing standardized units side by side in a coordinated way. Insulation
More informationSwitchgear Type 8DJH 36 for Secondary
Catalog HA 40.3 Edition 2017 Switchgear Type 8DJH 36 for Secondary Distribution Systems up to 36 kv, Gas-Insulated Medium-Voltage Switchgear siemens.com/8djh36 Application Typical uses R-HA40-135.tif R_HA40-150a
More informationSwitchgear Type 8DJH for Secondary Distribution Systems up to 24 kv, Gas-Insulated
Catalog HA 40.2 Edition 2017 Switchgear Type 8DJH for Secondary Distribution Systems up to 24 kv, Gas-Insulated Medium-Voltage Switchgear siemens.com/8djh Application Typical uses R-HA40-111.tif R-HA40-112.tif
More informationHD4. Gas insulated MV circuit-breakers kv A ka
HD4 Gas insulated MV circuit-breakers 12... 40.5 kv - 630... 3600 A - 16... 50 ka 1 DESCRIPTION Autopuffer breaking technique Electric arc extinction without chopped current No restriking after breaking
More informationUniGear type ZS1. Medium voltage, arc-proof, air-insulated, metal-clad switchboard
UniGear type ZS1 Medium voltage, arc-proof, air-insulated, metal-clad switchboard 2 UNIGER TYPE ZS1 UNIGER DOUBLE LEVEL UNIGER TYPE ZVC TECHNICL DT 4 6 8 10 1 2 3 4 3 UNIGER TYPE ZS1 UniGear is the new
More informationPC3.0/MNS R 690 V A Main low voltage distribution switchgear
Technical catalogue PC3.0/MNS R 690 V - 6300 A Main low voltage distribution switchgear 1TTB900001D0201 PC3.0/MNS R main low voltage distribution switchgear Index General Introduction...2 Technical data...3
More informationA system fault contribution of 750 mva shall be used when determining the required interrupting rating for unit substation equipment.
General Unit substations shall be 500 kva minimum, 1500 kva maximum unless approved otherwise by the University. For the required configuration of University substations see Standard Electrical Detail
More informationSF 6 Gas Insulated Switchgear Type SDH314 / SDHa314 for 72.5 to 145 kv
Three Phase Encapsulated Type SF 6 Gas Insulated Switchgear Type SDH314 / SDHa314 for 72.5 to 145 kv 06B1-E-0002 Small Space Requirement, High Reliability and Safety ー 72.5 to 145 kv GIS, SDH314/SDHa314
More informationOutdoor live tank vacuum circuit breaker Type OVB-VBF for 24/36/40.5 kv applications
Outdoor live tank vacuum circuit breaker Type OVB-VBF for 24/36/40.5 kv applications ABB a global leader ABB is a global leader in power and automation technologies that enable utility and industry customers
More informationFixed-Mounted Circuit-Breaker Switchgear Type 8DA and 8DB up to 40.5 kv, Gas-Insulated
Fixed-Mounted Circuit-Breaker Switchgear Type 8D and 8DB up to 0.5 kv, Gas-Insulated Medium-Voltage Switchgear Catalog H 35. 00 nswers for energy. R-H35-30.eps pplication Public power supply system R-H35-3.eps
More informationMEDIUM VOLTAGE CE-B METAL CLAD SWITCHBOARDS. CE-B-C-en-REV
CE--C-en-REV.04 2016.1 MEDIUM VOLTAGE MEDIUM VOLTAGE APPLICATION CE- Metal Clad switchboards family are designed for use in public and industrial distribution system up to 40,5kV for the operation and
More informationMedium voltage compact switchgears. rated voltage 12 and 25 kv rated current 400 and 630 A
Medium voltage compact switchgears rated voltage 12 and 25 kv rated current 400 and 630 A 1 General The new air-insulated DRIESCHER medium voltage compact switchgears are ideal for application in secondary
More informationUniSec Operation and maintenance manual
Medium voltage products UniSec Operation and maintenance manual Safety 3 For your safety! 3 Skilled personnel 3 Critical messages 3 Contact us! 3 1. Introduction 4 1.1 General aspects 4 1.2 Operation and
More informationMOULDED CASE CIRCUIT BREAKERS BC160N
D MOULDED CASE CIRCUIT BREAKERS BC160N D BC160N COMMERCIAL INFORMATION Circuit breakers...d4 Switch-disconnectors...D5 Connecting sets......d6 Mounting sets......d6 Switches...D7 Shunt trips...d7 Undervoltage
More informationMedium Voltage Metal-Enclosed Switches
Medium Voltage Metal-Enclosed Switches Outdoor Medium Voltage Switch.1 Introduction Product Selection Guide....................................2 Medium Voltage Switch MVS Product Description......................................
More informationFixed-Mounted Circuit-Breaker Switchgear Type 8DA and 8DB up to 40.5 kv, Gas-Insulated
www.siemens.com/medium-voltage-switchgear Fixed-Mounted Circuit-Breaker Switchgear Type 8D and 8DB up to 0.5 kv, Gas-Insulated Medium-Voltage Switchgear Catalog H 35.11 201 nswers for infrastructure and
More informationMedium Voltage Distribution PIX. Air Insulated Switchgear up to 24 kv PARS TABLEAU
Medium Voltage Distribution PIX Air Insulated Switchgear up to kv PIX Air Insulated Switchgear up to kv The PIX system has been designed in accordance with international (IEC) standards, and gives an optimal
More informationMedium Voltage Distribution FLUSARC. 36 kv A - 25 ka. Catalogue 2010
Medium Voltage Distribution FLUSARC 36 kv - 630 A - 25 ka Catalogue 2010 FLUSARC Contents Overview...3 General description...3 Main characteristics...3 Operating conditions...4 Degree of protection against
More informationModular medium-voltage switchgear. NorMax
Modular medium-voltage switchgear NorMax NorMax MODULAR MEDIUM-VOLTAGE SWITCHGEAR 2 NorMax Modular medium-voltage switchgear Contents Subject Page Table of contents 2 Introduction and main features 2 Technical
More information3TM Vacuum Contactors
Catalog Extract HG 11.23 Edition 2016 Catalog Extract Medium-Voltage Equipment siemens.com/3tm R-HG11-343.psd 2 Siemens HG 11.23 2016 Contents Medium-Voltage Equipment Catalog Extract HG 11.23 2016 Contents
More informationKYN28A-12 (GZS1) A.C METALCLAD REMOVABLE SWITCHGEAR FOR INDOOR USE CHINATCS
KYN28A-12 (GZS1) A.C METALCLAD REMOVABLE SWITCHGEAR FOR INDOOR USE CHINATCS 2001.09 KYN28A-12 (GZS1) A.C Metalclad Removable Switchgear for Indoor Use --------The Leader in Switchgear Up to 12kV 1. The
More informationB kv T&D GAS INSULATED SWITCHGEAR
GAS INSULATED SWITCHGEAR B 105 170 300 kv The increasing demand for electrical power in cities and industrial centers necessitates the installation of a compact and efficient distribution and transmission
More informationMedium Voltage Distribution FBX. Gas insulated switchgear up to 24 kv. Technical Characteristics Catalogue 2011
Medium Voltage Distribution FBX Gas insulated switchgear up to 24 kv Technical Characteristics Catalogue 2011 A new path for achieving your electrical installations A comprehensive offer The FBX range
More informationUniPack compact secondary substations (CSS) upto 36 kv For safe, reliable and space saving power distribution solutions
UniPack compact secondary substations (CSS) upto 36 kv For safe, reliable and space saving power distribution solutions ABB a global leader ABB is a global leader in power and automation technologies that
More informationUniversity of Houston Master Construction Specifications Insert Project Name
SECTION 26 13 13 MEDIUM VOLTAGE SWITCHGEAR PART 1 - GENERAL 1.1 RELATED DOCUMENTS: A. The Conditions of the Contract and applicable requirements of Divisions 0 and 1 and Section 26 00 01, Electrical General
More information