Table of content. fixed products. Mobile products. useful information. Shower seats. 6 Ergogrip Grabrails. 10

Transcription

1 Product Guide 2012/2013

2 2 Table of content fixed products Shower seats. 6 Ergogrip Grabrails. 10 ProGrip. 13 Back-Up. 13 Fixed & Hinged arm supports. 14 Bathroom accessories. 18 Miscellaneous products. 21 Washbasin products. 22 Shower stretchers. 23 Mobile products Shower trolleys. 23 Shower and toilet chairs. 25 Shower chairs. 28 Swimming pool products. 30 Toilet seat. 31 useful information Technical information. 33 Mounting advice. 34

3 3 Introduction Experience the comfort of a safe bathroom! This Product Guide offers you an overview of the LinidoSolutions range from Handicare. Our core values place our focus on the users, making sure they are the foundation of all our product developments. Therefore we observe the following principles: Safety is achieved by choosing the right products. LinidoSolutions not only offers a comprehensive choice but also guarantees that products meet stringent requirements with regard to their strength, as well as having high weight limits. Practicality Our products are extensively tested for their functionality. Our designs are based on the support requirements of the end user. Durability In the bathroom or shower room, products are exposed to demanding conditions, e.g. moisture, cold, heat. By chemical pre-treatment, and by using epoxy coating, stainless steel and plastic materials, a long lasting service life is guaranteed for the user. Ergonomics At Linido, ergonomic aspects such as seat height, width, depth and seat angle as well as the shape of the arm rests all play important roles in product design. Therefore product development utilizes the dimensions and natural movements of the human body. Design Much attention is paid to the design of our products. Where possible round shapes are used, which is advantages from a hygienic point of view while at the same time having a pleasing, modern look. Fixing points are concealed and different colour options allow bathrooms to be arranged to suit individual styles and tastes. For more information about LinidoSolutions, please contact us. Details listed on the back of this brochure.

4 4 General LinidoSolutions from Handicare are safety products for use in the bath, shower and toilet areas. The underlying idea behind these products is to offer as much independence and safety as possible for the user while at the same time providing for the comfort and safety of the caregiver. Our products are suitable for use in both home and institutional settings, allowing all manner of users to enjoy greater independence, no matter what their accessibility needs might be. LinidoSolutions products are solely available through offi cial dealers who can support you with their professional service and advice. our website We recommend that you visit our website regularly, where you will fi nd our latest product information, and mounting advice. our products Material LinidoSolutions products are constructed of: coated steel, or glass fi bre reinforced nylon, or coated stainless steel 304, or polished stainless steel 304 (recommended for heavy duty use in institutions) colours Most LinidoSolutions ns products are available in polished stainless steel and in the following colours: Ral 9010 White Ral 9001 Cream-white Ral 3003 Red Ral 5002 Blue Ral 9005 Black Polished stainless steel with white guards Polished stainless steel with black guards Shower seats and shower/toilet chairs in polished stainless steel are supplied with white armrests. Grab rails and hinged arm supports in polished stainless steel are supplied with the choice of white (standard) or black guards/wall plates. custom made products Tell us what you need! We are able to supply special sizes and design modifi cations of certain products.

5 5 Grabrail page 10 Showerhead holder page 18 Towel rail page 19 Hinged arm support page 14 Shower seat page 6 Toilet brush and holder page 18

6 6 shower seats Our fold up shower seats can be fi xed or removable, adapting the shower area for multiple users. The molded seat has been carefully designed to encourage a proper sitting position, so users feel secure and comfortable while enjoying showering independently or semi-dependently. shower seat li plastic seat, hinged seat width mm seat depth 405 mm including drill jig fi xing mount available (LI )! Floorsupport set LI recommended when capacity will exceed 100 kg and/or when wall structure does not provide for ideal mounting conditions shower seat with backrest li plastic seat, hinged plastic back, reinforced by stainless steel tube seat width mm seat depth 405 mm including drill jig fi xing mount available (LI )! Floorsupport set LI recommended when capacity will exceed 100 kg and/or when wall structure does not provide for ideal mounting conditions shower seat with backrest and armrests li plastic seat, hinged plastic back, reinforced by stainless steel tube independent ergonomically shaped swivel armrests seat width mm seat depth 405 mm including drill jig fi xing mount available (LI ) ! For larger users who require extra support while getting into or out of the seat, we recommend using the shower seat without armrests (product number LI ) in combination with Hinged Arm Supports (page 14).! Floorsupport set LI recommended when capacity will exceed 100 kg and/or when wall structure does not provide for ideal mounting conditions

7 shower seats 7 floorsupport set for nylon shower seats li fi ts Linido shower seats LI , LI , LI hinges with the seat consists of double leg support and double distance arm smooth height adjustment to accommodate seat height (from fl oor to top of seat: mm) can also be fi tted after installation! Recommended when capacity will exceed 100 kg and/or when wall structure does not provide for ideal mounting conditions shower seat with reduced seat depth Only available in these measurements. Floorsupport set available: LI li seat HT-cover material, hinged backrest HT-cover material independent swivel armrests seat width mm seat depth 315 mm (distance from wall to front side seat 445 mm) li (not shown) as LI , without backrest and armrests (distance from wall to front side seat 375 mm)! Floorsupport set LI recommended when capacity will exceed 100 kg and/or when wall structure does not provide for 625 Ø Ø10 ideal mounting conditions shower seat with soft toilet seat Floorsupport set available: LI li hinged soft toilet seat with open front backrest HT-cover material independent ergonomically shaped swivel armrests rails for bedpan Ø mm li (not shown) as LI , without backrest and armrests (distance from wall to front side seat 500 mm)! Floorsupport set LI recommended when capacity will exceed 100 kg and/or when wall structure does not provide for ideal mounting conditions. 625 Ø6.5 Ø click-on frame for shower seat li suitable for shower seat with back support LI and LI ! Fits the following Ergogrip grabrails: LI , LI , LI , LI , and to: horizontal angled grabrail LI ; angled grabrail for two walls LI with safety lock for securing to the grabrail distance from grabrail to top side of seat: 475 mm stainless steel tube frame easily mounted and removed on grabrail without tools Handicare advises the use of the fl oor support set LI when using a click-on frame Perfect for use when a permanently installed shower seat is not desired. Instantly adapts a shower for seated users. Easy to click on and off the Ergogrip grabrail

8 8 shower seats click-on frame for shower seat, height adjustable li as LI , but with variable sitting height adjusting range 100 mm space between grabrail and upper side seat: mm Handicare advises the use of the fl oor support set LI when using a click-on frame Adapts shower seat for different users. The Click-on frame for shower seat is a winner in the Innovations Competition, at REHACARE 2005 in Düsseldorf by the Research Institute for disabled aid technology (FTB). cushioned cover for shower seat li soft removable cushion, fi ts shower seats LI , LI , LI for users with sensitive skin easy to add and remove by means of Velcro closure underneath the seat polyethylene/polypropylene foam available only in blue Height adjustment system li for shower seats without backrests LI , LI & LI smooth adjustment to required seat height also allows mounting of shower seat at a later stage height adjustment 150 mm including drill jig set adjustable clamp levers available (LI ) Perfect for private bathrooms in institutional settings Height adjustment system li for shower seats with backrests LI , LI , LI & LI smooth adjustment to required seat height also allows mounting of shower seat at a later stage height adjustment 150 mm including drill jig set adjustable clamp levers available (LI ) Perfect for private bathrooms in institutional settings

9 shower seats 9 set backing plates li for fi xing LinidoSolutions shower seat from rear of wall comes with nuts M8 welded on the plate and threaded studs, washers and nuts supplied with backing plate for shower seats with backrests backing plate visible at back side of the wall only in white M shower seat on console li hinged seat independent ergonomically shaped swivel armrests seat and backrest HT-cover material (see page 33 for technical description) also available with a smooth height adjustment (LI ), minimum seat height 400 mm, maximum seat height 570 mm Option for when a wall mounted seat is not possible Ø

10 10 ergogrip grabrails Superior design for grab anywhere comfort. Our European designed Ergogrip grabrails are constructed of coated steel or stainless steel tube, bent to 60 instead of the traditional 90. Hand and wrist retain a natural position while holding the Ergogrip, and fi ngers wrap around the tube easily to grip securely. Grabrail ergogrip Length = A C li fi xing mount available (LI ) 75 C B A Grabrail ergogrip Length = A C li li li li li li li li li li fi xing mount available (LI ) 75 C A Grabrail ergogrip (with extra wall flange) Length = A C li li li C A

11 ergogrip grabrails 11 Horizontal angled grabrail li for two walls angled grabrail for two walls li the vertical rail can be placed in any position to suit by means of the connection block combined with a shower holder (LI ) this combination grabrail also makes a sturdy shower rail! plastic connection block only available in white Vertical combination grabrail li can be combined with any Ergogrip grabrail, to provide the ideal convenient position combined with a shower holder (LI ) this combination grabrail also makes a sturdy shower rail! plastic connection block only available in white angled grabrail 90 degrees a: li B: li recommended for mounting in bath and shower situations combined with a shower holder (LI ) this grabrail also makes a sturdy shower rail! a B

12 12 ergogrip grabrails angled grabrail 45 degrees a: li B: li recommended for mounting beside toilet or bath B a Grabrail for stair newel a B a: li B: li for two walls (inner corner) Grabrail for doorframe Length = A D li li li the small fl ange makes this extremely suitable for mounting on doorframes diameter tube 22 mm only available in these measurements only in white D A Backing plate li for fi xing Ergogrip from rear of wall comes complete with nuts M6 welded on the plate and threaded studs, washers and nuts backing plate visible at back side of the wall only in white M6

13 progrip & Back-up 13 progrip Therapist designed ProGrip promotes correct leverage to aid in sitting and standing li progrip, right li progrip, left assistance for moving from toilet and seat situations offers support to the fore-arm, during the entire movement from sitting to standing-up, and standup to sitting down promotes and increases independence while in moving to and from the toilet ergonomic design polyurethane foam with aluminium fi xing Great for use in tight bathrooms where the toilet is located very close to the wall. Available in Left or Right handed orientation. for more information, please visit www handicare com phase 1: bend moment The center of gravity of the body is being moved/brought forward. phase 2: transfer moment Controlling balance plays an essential role. phase 3: extension Muscular strength from several parts of the body is being activated. phase 4: stabilization Support is available to maintain standing. phase 1 phase 2 phase 3 phase 4 Back-up Therapist designed Back-Up is perfect for users who may not feel ready to install a shower seat. The Back-Up is a subtle way to offer a safe place to stand in the shower li Back-up offers support in the back while standing in the shower offers support during actions which require use of both hands (e.g. washing hair or drying) and turning on the spot ergonomic design, follows the natural curves of the body polyurethane foam with aluminium fi xing can be used as both right and left version offers shelf space for placing shampoo, soap and other bathing products within easy reach min.30mm min. 140mm

14 14 fixed & hinged arm supports When a grabrail is not enough, or if the placement of the toilet is away from the wall, arm supports are recommended for use on either side of the toilet or shower seat to facilitate sitting and standing. With a high static load capacity, our fi xed and hinged arm supports offer durable and safe support for users at home and in an institutional setting. Hinged arm supports feature a clean design and automatic locking when in upright position - safe for use as grabrail even when raised! fixed arm support li length 500 mm li length 600 mm li length 700 mm li length 800 mm li length 900 mm fi xing mount available (LI ) 500 / 600 / 700 / 800 / Ø Hinged arm support li length 530 mm li length 600 mm li length 700 mm li length 800 mm li length 900 mm locks automatically in the upright position plastic wall plate with tube of coated steel, coated stainless steel or polished stainless steel fi xing mount available (LI )! Floorsupport set LI recommended when wall structure does not provide for ideal mounting conditions (Not available for LI ) / 600 / 700 / 800 / Ø8,6 Hinged arm support Ø 32 mm li mm li mm li mm li mm increased tube diameter Ø 32 mm locks automatically in the upright position plastic wall plate with tube of coated steel fi xing mount available (LI ) only available in white / 700 / 800 / ! To combine with Toilet rol holder LI and Floor console LI only Ø 8,0

15 fixed & hinged arm supports 15 floor console for hinged arm support li recommended when wall mounting of the hinged arm support is not possible or desirable including backing plate and aluminium clamps for mounting of hinged arm support once mounted on the fl oor console the hinged arm support can be readjusted max Arm support(s) sold separately Ø10 (4x) front support li combination with two fi xed arm supports (LI2601.0xx) or two hinged arm supports (LI2603.3xx) can be fi tted in new and existing situations depth adjustable, lock on one side foam with ergonomic shape; washable, resistant to heavy use easy to assemble not applicable on LI2603.9xxx Arm support(s) sold separately floorsupport set for hinged arm support li recommended if there is any doubt about the strength of the wall consists of adjustable fl oor support, clamps and distance stay smooth height adjustment for hinged arm support with height from fl oor to top of support from 700 mm to 850 mm easily retrofi tted after installation of the hinged arm support (LI2603.3xx) not applicable on LI Arm support(s) sold separately. polyurethane foam armrest & toilet roll holder li foam armrest fi ts all LinidoSolutions hinged arm supports (LI2603.3xx) and fi xed arm supports (LI2601.0xx), not LI2603.9xxx includes adhesive available only in black Arm support(s) sold separately li toilet roll holder polished stainless steel roll holder with black plastic clamp for mounting onto LinidoSolutions hinged arm support (LI2603.3xx and ), fi xed arm support (LI2601.0xx) or Ergogrip grabrail (LI2611.xxx)! For LI2603.9xxx hinged arm supports order LI , with extra clamp Ø 32 mm 135

16 16 fixed & hinged arm supports toilet roll holder for single-handed use li plastic toilet roll holder allows user to change, unroll and tear paper with one hand fi ts any LinidoSolutions hinged arm support (LI2603.3xx), fi xed arm support (LI2601.0xx) or Ergogrip grabrail (LI2611.xxx) longer than 40 cm. Does not fi t LI2603.9xxx only available in white Arm support(s) sold separately. The Toilet roll holder for single-handed use won the Fireva Design Award This award is an accolade to innovative design in assistance for disabled and mobility impaired people. In addition the Toilet roll holder for single use has been nominated for the VSK award 2004 in the sanitary category. Height adjustment system for hinged arm support li smooth height adjustment to required height of support can be used for hinged arm supports LI2603.3xx and LI2603.9xx allows mounting of hinged arm at a later stage range in adjustment 150 mm set adjustable clamp levers available (LI ) Perfect for private bathrooms in an institutional setting Backing plate li for fi xing hinged arm support LI2603.3xx or LI2603.9xx from rear of wall comes complete with welded nuts M8 and matching threaded studs, washers and nuts backing plate visible at back side of the wall only available in white M options for hinged arm support Left photo: attachment for alarm and holes for cable (excluding alarm and cable) toilet roll holder, welded into hinged arm support Right photo: attachment for pneumatic operation of cistern (excluding pneumatic operation) toilet roll holder, welded into hinged arm support these photo s only depict an example of the possible options options are available separately or in any desired combination. (see price list for conditions) for all models LI2603.3xx and LI2603.9xx hinged arm supports Arm support(s) sold separately.

17 17 Showerhead holder page 18 Double robe hook page 19 Angled grabrail 90 degrees page 11 Tooth brush holder page 18 Height adjustment system page 8 Shower seat with backrest and armrests page 6

18 18 Bathroom accessories showerhead holder li all plastic construction suitable for all Ergogrip grabrails with lengths of 30 cm or more; converts an Ergogrip into a safe shower rail can also be retrofi tted after installation of the Ergogrip grabrail light and easily adjustable over the full length of Ergogrip grabrail with very little force and no mechanisms to release: Pull down by the shower hose, push up with one fi nger ergonomical grip for conical shaped shower tube collar toilet brush and holder li all plastic construction with stainless steel fi ttings (included) tooth brush holder li all plastic construction includes transparent tumbler with stainless steel fi ttings (included) soap dish li all plastic construction with stainless steel fi ttings (included) Locking teeth allow for angled placement of soapdish in the holder

19 Bathroom accessories 19 shelf li all plastic shelf with stainless steel fi ttings (included) toilet roll holder li all plastic construction can also be used as spare roll holder with stainless steel fi ttings (included) robe hook li (single robe hook) li (double robe hook) all plastic construction with stainless steel fi ttings (included) towel rail li (300 mm) li (600 mm) combination of towel rail and grabrail top tube can be used as grabrail Ergogrip The only safe way to combine a grabrail and towel rail

20 Bathroom accessories shower curtain rail li for corner shower without curtain and rings designed and fabricated with the same methods as the ergogrip grabrails ceiling mounting kit for shower curtain rail li recommended when shower curtain rail LI is longer than standard can be shortened to the desired height Shower curtain rail sold separately Hardware for tilting mirror li adapts vanity area to seated and standing users mirror not included handle LI sold separately Advice for measurements of mirror: Round: max. Ø 60 cm Rectangular: max. 60 x 40 cm Thickness: max. 6 mm Mirror frame is actually 2 ergogrip grabrails - mount as such for an extra area of support in the bathroom. 92 Handle for moving tilting mirror li handle for moving tilting mirror Allows user to adjust mirror from a seated position.

21 Miscellaneous products 21 ceiling support li ceiling mounted ceiling mounting plate with an adjustable nylon strap and moulded grip Ø8, Facilitates rising from seated or supine position, depending on ceiling height. Place over bed or favorite chair. Perfect for institutional settings swinging support li wall mounted facilitates rising from a supine position frame can be locked at 0, 45, 90, 135 and 180 degrees adjustable nylon strap and moulded grip Ø Backrest for toilet with rear cistern li li to be mounted on the wall behind a toilet with a high level cistern allows the user to lean back comfortably and safely adjustable depth 265 A LI LI A Ø80 52 Backrest for toilet with built in cistern li to be mounted on the wall behind a toilet with a built in cistern allows the user to lean back comfortably and safely adjustable depth

22 22 Washbasin products Washbasin rail li offers support around the washbasin, eliminates the risk of the user using the actual washbasin rim for support special sizes available upon request Fits many brands of wall mounted and pedestal washbasins. Special sizing available - contact us for more information (details on the back of this catalog) Kit for adjustable washbasin li smooth height and depth adjustment by means of a gas spring adjustment range: 250 mm in height and 86 mm in depth easy mounting at any desired height suitable for all standard washbasins with a fl at back and a weight of kg kit is supplied without washbasin or faucet. Flexible supply/drain hoses sold separately (LI ) only available in white flexible supply and drain set li fl exible supply and drain set Ø 40 mm, includes the washbasin plug, for standard washbasin and washbasin unit LI fl exible hose 150 cm two 50 cm long fl exible hoses clad with stainless steel are supplied for attaching to hot and cold water supply and have 3/8 and 10 mm connectors drain can be mounted horizontally or vertically only in white

23 shower stretchers & shower trolleys 23 shower stretcher li , li en li HT-cover material (see page 33 for technical description) wall hinges and hinged leg supports allow the stretcher to fold up or down, and the wall clamp (included) secures stretcher against the wall when not in use available with adjustable (gas spring) backrest (LI , LI and LI ) available with pvc water receiver and fl exible drain hose 1000 mm (LI , LI and LI ) Note: these versions only fold UP available with both adjustable backrest and pvc water receiver and fl exible drain hose (LI , LI and LI ) Note: these versions only fold UP custom dimensions are available on request Measurement drawings li2407 and li2408 available upon request or see www handicare com A B LI LI LI xØ8.5 A B C LI LI LI xØ8.5 B A 2xØ xØ B 755 A 120 2xØ C li2403 xxx xØ li2404 xxx Height adjustable shower trolley li , li en li HT-cover material (see page 33 for technical description) four stainless steel double braked castors Ø 125 mm adjustable (gas spring) backrest pvc water receiver with fl exible drain hose of 1000 mm height adjustable via hydraulic pump two hinged side fences available only in the dimensions listed also available without backrest (LI , LI and LI ) A B LI LI LI B A removable & hinged side fence a: removable side fence li suitable for all LinidoSolutions shower stretchers and shower trolleys includes plastic mounting clamps B: Hinged side fence li suitable for all LinidoSolutions shower stretchers and shower trolleys includes plastic mounting clamps

24 24 Hardware for tilting mirror page 20 Robe hook page 19 Shelf page 19 Tooth brush holder page 18 Washbasin unit page 22 Soap dish page 18 Flexible supply and drain set page 22 Handle for moving tilting mirror page 20 Hinged arm support page 14 Toilet roll holder for single-handed use page 16 Comfort-seat page 31 Shower stool with armrests page 28

25 shower and toilet chairs 25 shower/toilet chair trento li seat height (incl. seat) 550 mm (fits over standard and ADA height toilets) li seat height (incl. seat) 500 mm (fi ts over standard toilets) detachable and reversible polyurethane foam toilet seat: choose front or back for hygiene opening seat depth mm, seat width 470 mm ergonomically shaped polyurethane foam backrest with lumbar support independent ergonomically shaped swivel armrests detachable rails for bedpan or bucket Ø mm 490 B A B LI LI A Mobile shower/toilet chair trento li seat height (incl. seat) 550 mm (fits over standard and ADA height toilets) li seat height (incl. seat) 500 mm (fi ts over standard toilets) detachable and reversible polyurethane foam toilet seat: choose front or back for hygiene opening seat depth mm, seat width 470 mm ergonomically shaped backrest with lumbar support, polyurethane foam integrated push bar independent ergonomically shaped swivel armrests detachable rails for bedpan or bucket Ø mm four stainl. st.l double braked castors Ø 125 mm adjustable swing-up footrests 490 B A B C LI LI C A accessories shower/toilet chair trento li Insert Only available for shower/toilet chair Trento Polyurethane foam (graphite) li li replacement set toilet seat for Trento, excluding bedpan rails, polyurethane foam (graphite) li replacement set backrest for Trento, polyurethane foam (graphite) li replacement set bedpan rails for Trento, coated stainless steel 485 li li Bedpan & bucket Bedpan li stainless steel, Ø 300 mm with lid and handle Bucket li stainless steel, Ø 300 mm with lid and handle Fits all Linido shower/toilet chairs equipped with bedpan rails

26 26 shower and toilet chairs tilting shower and toilet chair li independent ergonomically shaped swivel armrests four stainless steel double braked castors Ø 125 mm backrest HT-cover material (see page 33 for technical description) adjustable and removable swing away foot rests hinged soft toilet seat with open front removable rails for bedpan Ø mm 30 tilting operation by gas spring height and depth adjustable headrest calf strap and lumbar support can be used over toilets with a maximum height of mm Height adjustable/tilting shower chair li (power up/down & tilt) 625 electrical adjustment of seat height (range: from 580 to 1040 mm electrical control for smooth tilt, max. 35 independent ergonomically shaped swivel armrests four stainless steel double braked castors Ø 125 mm backrest HT-cover material (see page 33 for technical description) adjustable and removable swing-away stainless steel foot rests detachable and reversible soft toilet seat: hygiene opening at front or back at choice removable rails for bucket Ø mm safety belt, lumbar support and calf strap 1065 included height and depth adjustable headrest easy to use over most standard and ADA toilets li (manual up/down & tilt) as LI , but with height adjustment by means of a hydraulic pump and tilting operation by gas spring Mobile shower and toilet chair - heavy duty li seat height (incl. seat) 610 mm (fi ts over standard and ADA height toilets) frame: width 600 mm, depth 500 mm reinforced frame maximum user weight: 300 kg fl ip-down locking armrests backrest HT-cover material (see page 33 for technical description) hinged soft toilet seat with open front rails for bedpan and bucket Ø mm four stainless steel double braked castors Ø 125 mm adjustable swing-up footrest

27 shower and toilet chairs 27 shower and toilet chair li seat height (incl. seat) 610 mm (fi ts over standard and ADA height toilets) li seat height (incl. seat) 530 mm (fi ts over standard height toilets) independent ergonomically shaped swivel armrests backrest HT-cover material (see page 33 for technical description) hinged soft toilet seat with closed front rails for bedpan and bucket Ø mm also available with seat with open front (LI and LI ) also available with castors (LI , LI , LI and LI ) 490 C B A B C LI LI A Mobile shower and toilet chair li seat height (incl. seat) 610 mm (fi ts over standard and ADA height toilets) li seat height (incl. seat) 530 mm (fi ts over standard height toilets) independent ergonomically shaped swivel armrests backrest HT-cover material (see page 33 for technical description) hinged soft toilet seat with open front rails for bedpan and bucket Ø mm four stainless steel double braked castors Ø 125 mm adjustable swing-up footrests also available with seat with closed front (LI and LI ) C 490 B A B C D LI LI D A shower and toilet chair (self propelling) li seat height (incl. seat) 610 mm (fi ts over standard and ADA height toilets) li seat height (incl. seat) 530 mm (fi ts over standard height toilets) independent ergonomically shaped swivel armrests backrest HT-cover material (see page 33 for technical description) hinged soft toilet seat with open front rails for bedpan and bucket Ø mm stainless steel double braked castors Ø 125 mm and moulded 24 wheels with brake and rim adjustable swing-up footrests also available with seat with closed front (LI and LI ) 490 C B A B C D LI LI D 250 A 650 soft toilet seats (not for the Trento, for Trento options, see page 25) li soft toilet seat with open front li soft toilet seat with closed front only for LinidoSolutions shower and toilet chairs, but not for Trento polyurethane foam (graphite) li insert for soft toilet seat only for the above-mentioned soft toilet seats polyurethane foam (graphite)

28 shower chairs shower stool with armrests li soft, removable seat with water permeable slots continuous, fi xed armrests height adjustable in 8 steps, no tools needed seat height mm Back support for shower stool li soft back support for shower stool LI , can be fi xed without tools integrated handle Stool LI sold separately shower chair li seat height 540 mm li seat height 490 mm seat and backrest HT-cover material (see page 33 for technical description) independent ergonomically shaped swivel armrests also available with castors (no footrests) (LI and LI ) B 490 A B LI LI A Mobile shower chair li seat height 540 mm li seat height 490 mm seat and backrest HT-cover material (see page 33 for technical description) independent ergonomically shaped swivel armrests four stainless steel double braked castors Ø 125 mm adjustable swing-up footrests B 490 A B C LI LI C A

29 shower chairs 29 shower chair (self propelling) li seat height 540 mm li seat height 490 mm seat and backrest HT-cover material (see page 33 for technical description) independent ergonomically shaped swivel armrests stainless steel double braked castors Ø 125 mm and moulded 24 wheels with brake and rim adjustable swing-up footrests B 490 A B C LI LI C A options for chairs these options are not available for the range of shower/toilet chairs trento for trento chair options, see page 25 1 central brake operation on both rear castors left- and right handed operation not for self propelling chairs, LI , LI and LI swivel armrests with front support independent swivel armrests order with the chair (cannot be retrofi tted) 3 adjustable, removable swing-away footrests can be put on all types LinidoSolutions shower chairs and shower and toilet chairs, except on LI and LI

30 30 swimming pool products (stainless steel 316) swimming pool hoist chair li seat height 490 mm seat and backrest HT-cover material (see page 33 for technical description) lift strap openings on backrest and forelegs of frame independent ergonomically shaped swivel armrests armrests in aluminium with white coating four stainless steel double braked castors Ø125 mm adjustable swing-up footrest only available in seat height 490 mm only available in polished stainless steel swimming pool hoist chair (self-propelling) li seat height 490 mm seat and backrest HT-cover material (see page 33 for technical description) lift strap openings on backrest and forelegs of frame independent ergonomically shaped swivel armrests armrests in aluminium with white coating stainless steel double braked castors Ø125 mm and moulded 24 wheels with brake and rim adjustable swing-up footrest only available in seat height 490 mm only available in polished stainless steel swimming pool shower trolley li HT-cover material (see page 33 for technical description) four stainless steel double braked castors Ø125 mm adjustable (gas spring) backrest height adjustable by means of hydraulic pump with right- and left handed operation two hinged side fences upper frame can be detached from lower frame and has an inlay frame with 1900hoist openings 615 only available in the dimensions listed and length 1900 mm only available in polished stainless steel

31 toilet seat 31 comfort-seat li soft toilet seat for users that must sit for a prolonged period of time and/or have a sensitive skin two types of foam under a waterproof coating includes stainless steel fi xing material only available in graphite

32

33 technical information 33 Maintenance For all products: clean with mild, non abrasive cleaners only. Rinse with clean water after use. Guarantee Five years warranty on all products, excluding the cushioned cover for shower seat (LI ) and Neoprene parts, which is one year. This guarantee is only valid for normal use of the products and use of the products without modifi cation, in their original state. All LinidoSolutions bath & safety products have the CE-mark medical equipment (class1) and comply to NEN-EN Material specifications steel ST37.2, DIN 17100, Ø 28,6 x 1,5 mm steel ST37.2, DIN 17100, Ø 25,4 x 1,5 mm stainless steel AISI 304, Ø 28,0 x 1,5 mm stainless steel AISI 304, Ø 25,4 x 1,5 mm stainless steel AISI 316, Ø 25,0 x 1,5 mm plastic shower seats: glassfi bre reinforced nylon wall fl anges Ergogrip and wall plate hinged arm support: glassfi bre reinforced nylon plastic bathroom accessories: PMMA wall plates of shower seats: stainless steel AISI 304 Moving and/or hinged parts are always made of stainless steel and/or plastic. preparation for coating Before coating, steel is alkaline de-greased, phosphated and passifi ed. coating Epoxypolyester, µm thick. Weatherresistant and hardened (International Buchholz hardness test to DIN 53153: > 80). Meets salt spray test to DIN 50021/ASTM B117 (1000 hours, < 1mm). Ht-cover material H = Hygiene = easy to clean, T = Transfer = fl at surfaces for easy transfers. White woven nylon cloth with plastic coating fully glued around the tube. Does not wear out and is easy to clean. isolation sets Because of the necessary electrical isolation, products for wall mounting or fl oor mounting, which are not designed with plastic fl anges or wall plates, will be delivered with an isolation set including heavy duty washers and caps. fixing materials LinidoSolutions products will be delivered without any fi xings, except for bathroom accessories. Determine the type of wall and use suitable fi xings. For a durable, reliable mounting, use only corrosion resistant fi xing materials. Weight limits for normal use shower stool user weight: max. 150 kg. shower chairs and shower and toilet chairs user weight: max. 200 kg. constant push pressure per armrest: max. 100 kg. Mobile shower and toilet chair heavy duty user weight: 300 kg. constant push pressure per armrest: max. 150 kg. shower/toilet chairs trento user weight: 200 kg. constant push pressure per arm rest: max. 100 kg. tilting shower chair and height adjustable-/tilting shower chairs user weight: max. 150 kg. constant push pressure per armrest: max. 100 kg. shower seats user weight: max. 150 kg. user weight for nylon shower seat and shower seat with HT-cover material in combination with a fl oorsupport set: max. 300 kg. constant push pressure per armrest: max. 75 kg. shower stretchers and shower trolleys user weight: max. 150 kg. fixed and hinged arm supports user weight: max. 150 kg. lateral pressure: max.100 kg. Grabrails ergogrip user weight: max. 150 kg. swinging support and ceiling support user weight: max. 150 kg. progrip user weight: max. 150 kg. Back-up user weight: max. 150 kg. All dimensions in this brochure are in inches. Tolerances for all indicated dimensions are ± 5 mm. Handicare reserves the right to modify designs as part of our ongoing product development.

34 34 Mounting advice for fixed arm supports, shower seats, pro Grip, Backup, floor console, adjustment systems and swinging support type of Wall? Solid concrete, natural stone, solid red brick, sand-lime brick anchoring options & screws Plug Anchors for 8 mm hardware & stainless steel 8 mm wood screws or 8 mm Lag Bolts 8 mm Sleeve anchor Expansion anchor Drop-in anchors & 8 mm Stainless Steel bolt 8 mm TapCons (w/out using any expansion style anchor) Solid/Massive aerated concrete, plaster block, pumice solid brick Injection Mortar & 8 mm threaded rod Adhesive anchoring system & 8 mm concrete anchor screw driven into adhesive fi lled hole Perforated/hollow Hollow brick (Poriso), Hollow sand-lime brick Injection mortar + anchor sleeve + screw inserts & Stainless Steel Hex head 8 mm wood screws 8 mm sleeve anchors 8 mm TapCons Adhesive anchoring system & 8 mm concrete anchor screw driven into adhesive fi lled hole Plaster board, squeezed fi breboard, chipboard Reinforce behind wall with wood 2x Material (doubled up at each anchor point) or 20 mm plywood & #12 or #14 Stainless Steel wood screws or 8 mm Stainless Steel lag bolts WingIts (use fl oor supports LI for Shower seats or LI for Hinged Arm Supports if using WingIts with no blocking) The above mounting instructions are a recommendation only. Anchoring methods and hardware selection must be determined on site, according to the wall structure. Handicare is not responsible for damages that may result due to improper installation. Handicare recommends the use of fl oor supports (where applicable) whenever there is uncertainty about the wall structure, and whenever WingIts are used.

35 Mounting advice 35 for ergogrip grabrails, shower stretchers, ceiling support, Washbasin rail, Grabrail for stair newel, Grabrail for door frame and Backrests for wall mounting type of Wall? Solid concrete, natural stone, solid red brick, sand-lime brick anchoring options & screws Plug Anchors for 6 mm hardware & stainless steel 6 mm wood screws or 6 mm Lag Bolts 6 mm Sleeve anchor Expansion anchor Drop-in anchors & 6 mm Stainless Steel bolt 6 mm TapCons (w/out using any expansion style anchor) Solid/Massive aerated concrete, plaster block, pumice solid brick Injection Mortar & 6 mm threaded rod Adhesive anchoring system & 6 mm concrete anchor screw driven into adhesive fi lled hole Perforated/hollow Hollow brick (Poriso), Hollow sand-lime brick Injection mortar + anchor sleeve + screw inserts & Stainless Steel Hex head 6 mm wood screws 6 mm sleeve anchors 6 mm TapCons Adhesive anchoring system & 6 mm concrete anchor screw driven into adhesive fi lled hole Plaster board, squeezed fi breboard, chipboard Reinforce behind wall with wood 2x Material (doubled up at each anchor point) or 20 mm plywood & #10 or #12 Stainless Steel wood screws or 6 mm Stainless Steel lag bolts WingIts The above mounting instructions are a recommendation only. Anchoring methods and hardware selection must be determined on site, according to the wall structure. Handicare is not responsible for damages that may result due to improper installation.

36 Handicare USA 2201 Hangar Place Suite 200, Allentown, PA Toll free: (866) Local: (610) Fax: (610)