o Brass Trim Option (BR) nameplate,

Transcription

1 Standard Features & Accessories VENTILATION Built-In 10 H. Wall Hood w/ventilar/ 12 H. Chimney Wall Hood w/ventilar/ All models include Heavy-duty construction o Virtually seamless stainless steel design with no visible screws Heat sensor turns the ventilar on full power when cooking temperatures reach uncomfortable levels Recommended for 24 W., 30 W. & 36 W. non-griddle/grill ranges, rangeps, and cookps Two 50-watt halogen lights with dimmer control o Power switch and dimmer control are separate, allowing you leave dimmer at favorite position Easy cleanup o Design of low-profile filter system means less interior hood space be cleaned o Canopy interior is completely lined in stainless steel for increased rigidity, seamless appearance, and easy cleaning Professional 10 H. hoods include Commercial-type size, design, and styling Commercial-type baffle filter system efficiently removes grease and heated vapors from the air; especially designed for use with commercial-type products 460 CFM interior-power ventilar comes standard with product o Variable speed controls for cusm venting separate on/off switch allows you leave ventilar at favorite/most-used setting Designer 12 H. hoods include Professional-type size, design, and styling Delay function can be set shut off from minutes later (10 min. increments) 12-hour timer built in controls Two dishwasher-safe stainless steel mesh filters are easily removed for quick cleaning (frame and mesh are stainless steel) 460 CFM interior-power ventilar comes standard with product o Variable speed controls for cusm venting separate on/off switch allows you leave ventilar at favorite/most-used setting Model numbers PROFESSIONAL WALL HOODS, 10 H./21 D. VWH W. o Recommended for use with 24 W. non-griddle/grill ranges (for larger equipment, use 18 H. hood) VWH W. o Recommended for use with 30 W. ranges, 30 W. non-griddle/grill rangeps, and 30 W. cookps VWH W. o Recommended for use with 36 W. non-griddle/grill ranges, 36 W. non-griddle/grill rangeps, and 36 W. cookps DESIGNER CHIMNEY WALL HOODS, 12 H./24 D. DCH W. o Recommended for use with 30 W. ranges, 30 W. non-griddle/grill rangeps, and 30 W. cookps DCH W. o Recommended for use with 36 W. ranges, 36 W. non-griddle/grill rangeps, and 36 W. cookps Model Options VWH Professional Wall Hood DCH Designer Chimney Wall Hood FINISH DETAILS FOR PROFESSIONAL MODELS Stainless Steel (SS), Black (BK), White (WH), Metallic Silver (MS), Graphite Gray (GG), Sne Gray (SG), Taupe (TP), Biscuit (BT), Cotn White (CW), Oyster Gray (OG), Golden Mist (GM), Lemonade (LE), Sage (SA), Mint Julep (MJ), Sea Glass (SE), Iridescent Blue (IB), Viking Blue (VB), Pumpkin (PM), Racing Red (RR), Apple Red (AR), Burgundy (BU), Plum (PL), Chocolate (CH), and Cobalt Blue (CB). Finish designates front and sides. Accessory Rail Option Front of hood. (Must be ordered facry installed) o Stainless Steel/Chrome (CR) Stainless steel rail with chrome supports/ brackets and hooks (included). o Brass Trim Option (BR) nameplate, rail, supports/brackets, and hooks (included). Brass components have a durable protective coating for maintenance-free normal use. FINISH DETAILS DESIGNER MODELS Stainless Steel (SS), Black (BK), White (WH), Metallic Silver (MS), Graphite Gray (GG), Sne Gray (SG), Taupe (TP), Biscuit (BT), Cotn White (CW), Oyster Gray (OG), Golden Mist (GM), Lemonade (LE), Sage (SA), Mint Julep (MJ), Sea Glass (SE), Iridescent Blue (IB), Viking Blue (VB), Pumpkin (PM), Racing Red (RR), Apple Red (AR), Burgundy (BU), Plum (PL), Chocolate (CH), and Cobalt Blue (CB). Finish designates front and sides. Accessory Rail Option (DCH Only) Front of hood. (Must be ordered facry installed) o Stainless Steel/Chrome (CR) Stainless steel rail with chrome supports/brackets and hooks (included). o Brass Trim Option (DCH Only) (BR) rail, supports/brackets, and hooks (included). Brass components have a durable protective coating for maintenance-free normal use. ORDERING INSTRUCTIONS First specify model number, followed by color code (VWH2410SS). If ordering optional decorative rail, specify code at end (VWH2410SSCR). R E L E A S E D 2 / 2 0 / V R C INFORMATION SUBJECT TO CHANGE

2 6 H. Wall Hood w/ventilar Standard Features & Accessories Designer 6 H. hoods include Heavy-duty construction o Virtually seamless stainless steel design with no visible screws Allows true replacement of older hoods with minimal cabinet alteration Recommended for 24 W., 30 W. & 36 W. non-griddle/grill ranges, rangeps, and cookps 300 CFM interior-power ventilar comes standard Heat sensor turns the ventilar on full power when cooking temperatures reach uncomfortable levels Ships set recirculate, but may be converted vent out p or rear Two 50-watt halogen lights with dimmer control o Power switch and dimmer control are separate, allowing you leave dimmer at favorite position Easy cleanup o Design of low-profile filter system means less interior hood space be cleaned o Canopy interior is completely lined in stainless steel for increased rigidity, seamless appearance, and easy cleaning o Two dishwasher-safe stainless steel mesh filters are easily removed for quick cleaning (frame and mesh are stainless steel) Model numbers DESIGNER 6 WALL HOODS, 6 H./20 D. DWH W. o Recommended for use with 30 W. non-griddle/grill ranges, 30 W. non-griddle/grill rangeps, and 30 W. cookps DWH W. o Recommended for use with 36 W. non-griddle/grill ranges, 36 W. non-griddle/grill rangeps, and 36 W. cookps Model Options DWH Designer Replacement Wall Hood FINISH DETAILS DESIGNER MODELS Stainless Steel (SS), Black (BK), White (WH), Metallic Silver (MS), Graphite Gray (GG), Sne Gray (SG), Taupe (TP), Biscuit (BT), Cotn White (CW), Oyster Gray (OG), Golden Mist (GM), Lemonade (LE), Sage (SA), Mint Julep (MJ), Sea Glass (SE), Iridescent Blue (IB), Viking Blue (VB), Pumpkin (PM), Racing Red (RR), Apple Red (AR), Burgundy (BU), Plum (PL), Chocolate (CH), and Cobalt Blue (CB). Finish designates front and sides. ORDERING INSTRUCTIONS First specify model number, followed by color code (DWH3006SS). R E L E A S E D 2 / 2 0 / V R C INFORMATION SUBJECT TO CHANGE

3 Please see Installation Notes & Accessories for important information, including conversion kits, filters, duct covers, backsplashes, and warming shelf panels. Dimensions & Specifications PRODUCT DIMENSIONS 12 (30.5 cm) VENTILATION Built-In 10 H. Wall Hood w/ventilar/ 12 H. Chimney Wall Hood w/ventilar/ VWH Professional Wall Hood DCH Designer Chimney Wall Hood 12 (30.5 cm) 16 (40.6 cm) 6 (15.2 cm) 12 (30.5 cm) (5.1 cm) 18 (45.7 cm) (25.4 cm) (76.2 cm) 12 (30.5 cm) PROFESSIONAL A 21 (53.3 cm) DESIGNER A 24 (61.0 cm) 12 (30.5 cm) 12 (30.5 cm) 16 (40.6 cm) 6 (15.2 cm) 4 (10.2 cm) 2 (5.1 cm) 2 (5.1 cm) 10 (25.4 cm) 12 (30.5 cm) A 21 (53.3 cm) A 24 (61.0 cm) PROFESSIONAL W/RECIRCULATING KIT DESIGNER W/RECIRCULATING KIT Model Hood Duct Cover Lights Filters Heat Approx. Width (A) Height Width Depth Height Lamps Ship. wt. VWH /8 (60.6 cm) 10 (25.4 cm) 23-7/8 12 (30.5 cm) 12 (30.5 cm) 2 2 N/A 48 lbs. (60.6 cm) (21.7 kg) VWH /8 (75.9 cm) 10 (25.4 cm) 29-7/8 12 (30.5 cm) 12 (30.5 cm) 2 2 N/A 56 lbs. (75.9 cm) (25.2 kg) VWH /8 (91.1 cm) 10 (25.4 cm) 35-7/8 12 (30.5 cm) 12 (30.5 cm) 2 2 N/A 60 lbs. (91.1 cm) (27.0 kg) DCH /8 (75.9 cm) 12 (30.5 cm) 16 (40.6 cm) 12 (30.5 cm) 18 (45.7 cm) 2 2 N/A 56 lbs. 30 (76.2 cm) (25.2 kg) DCH /8 (91.1 cm) 12 (30.5 cm) 16 (40.6 cm) 12 (30.5 cm) 18 (45.7 cm) 2 2 N/A 60 lbs. 30 (76.2 cm) (27.0 kg) R E L E A S E D 2 / 2 0 / V R C INFORMATION SUBJECT TO CHANGE

4 6 H. Wall Hood w/ventilar Please see Installation Notes & Accessories for important information, including conversion kits, filters, duct covers, backsplashes, and warming shelf panels. Dimensions & Specifications PRODUCT DIMENSIONS DWH Designer Replacement Wall Hood 2 (5.1 cm) 6 (15.2 cm) A 20 (50.8 cm) DESIGNER Model Hood Lights Filters Heat Approx. Width (A) Height Lamps Ship. wt. DWH /8 (75.9 cm) 6 (15.24 cm) 2 2 N/A 45 lbs. (20.4 kg) DWH /8 (91.1 cm) 6 (15.24 cm) 2 2 N/A 48 lbs. (21.9 kg) R E L E A S E D 2 / 2 0 / V R C INFORMATION SUBJECT TO CHANGE

5 Dimensions & Specifications VENTILATION Built-In 10 H. Wall Hood w/ventilar/ 12 H. Chimney Wall Hood w/ventilar 6 H. Wall Hood w/ventilar CLEARANCE DIMENSIONS 60 min. 24 min. 66 min. 30 min. (152.4 cm) (160.0 cm) 63 max. (61.0 cm) (68.6 cm) 27 max.* (167.6 cm) (175.3 cm) 69 max. (76.2 cm) (83.8 cm) 33 max. 36 (91.4 cm) 36 (91.4 cm) PROFESSIONAL DESIGNER CHIMNEY HOOD 57 min. 21 min. (144.8 cm) (160 cm) 63 max. (53.3 cm) (68.6 cm) 27 max.* 36 (91.4 cm) DESIGNER REPLACEMENT WALL HOOD *Note: When installing with a 24 high-shelf, the 27 (68.6 cm) max. dimensions must be used. R E L E A S E D 2 / 2 0 / V R C INFORMATION SUBJECT TO CHANGE

6 Installation Requirements VENTILATION Built-In 10 H. Wall Hood w/ventilar/ 12 H. Chimney Wall Hood w/ventilar 6 H. Wall Hood w/ventilar VWH Professional Wall Hood DCH Designer Chimney Wall Hood DWH Designer Replacement Wall Hood Proper installation/ ducting is extremely important ensure maximum performance. Use a qualified and trained installer. DUCTING VWH/DCH 460 CFM interior (blower included) DWH 300 CFM interior (blower included) Check with a qualified and trained installer for local codes and makeup air requirements, if any. Max. duct run length 50 (152.4 m) o Duct run length is for general reference only; for longer duct runs, increase duct size and contact a qualified and trained installer. UTILITY REQUIREMENTS o Straight runs and gradual turns are best; for example, each 90 elbow is equivalent 5 10 ( cm) of straight run. VWH/DCH 7 round duct DWH 3-1/4 x 10 round duct or equivalent o Never use flexible duct; it creates back pressure/air turbulence and greatly reduces performance. GAS Not applicable ELECTRICAL Hardwire direct with two-wire with ground 120 VAC/60 Hz Max. amp usage 5.6 PLUMBING Not applicable Note: All CFMs are based on tests with 0.1 static pressure. Without applying static pressure (some brands do not), CFM could be greatly overstated. Model Interior Ventilar Kits Interior Duct Size Interior Max. Amps VWH CFM standard 7 (17.8 cm) 5.6 VWH CFM standard 7 (17.8 cm) 5.6 VWH CFM standard 7 (17.8 cm) 5.6 DCH CFM standard 7 (17.8 cm) 5.6 DCH CFM standard 7 (17.8 cm) 5.6 DWH CFM standard 3-1/4 (9.5 cm) x 10 (25.4 cm) 5.6 DWH CFM standard 3-1/4 (9.5 cm) x 10 (25.4 cm) 5.6 R E L E A S E D 2 / 2 0 / V R C INFORMATION SUBJECT TO CHANGE

7 Built-In 10 H. Wall Hood w/ventilar/ 12 H. Chimney Wall Hood w/ventilar 6 H. Wall Hood w/ventilar Installation Notes & Accessories Recirculating Hood Conversion Kits Stainless Steel (SS) For use with VWH & DCH models only Eliminates ducting Kit includes o Two charcoal filters o Installation hardware o Top vent/grille Professional 4 H. x 12 D. Designer 2 H. x 12 D. Model Description Approx. ship wt. lbs. (kg) VRK24 Professional 24 W. conversion kit 10 (4.5) VRK30 Professional 30 W. conversion kit 13 (5.9) VRK36 Professional 36 W. conversion kit 16 (7.3) DRK30 Designer 30 W. conversion kit 15.4 (7) DRK36 Designer 36 W. conversion kit 15.4 (7) Charcoal Filters For use with VRK & DRK conversion kits and DWH 6 H. hood Recommended replacement every 6 12 months Model Description Approx. ship wt. lbs. (kg) CFV11 Professional hood filter for 24 W. 1 (0.5) CFV13 Professional hood filter for 30 W. & 36 W. 2 (0.9) CF-D12 Designer hood filter for 30 W. 2 (0.9) CF-D14 Designer hood filter for 36 W. 2 (0.9) CF-D06 Designer hood filter for 6 H. models 1 (0.5) Duct Covers Specify finish code following accessory model number (for example, DCW24-SS) o Professional models For VWH hoods 12 D. Extends height of hood by 12 conceals duct Available in Stainless Steel (SS), Black (BK), White (WH), Almond (AL), Biscuit (BT), Sne Gray (SG), Graphite Gray (GG), Burgundy (BU), Lemonade (LE), Mint Julep (MJ), Forest Green (FG), Viking Blue (VB), Cobalt Blue (CB), and Eggplant (EP). o Designer models For DCH hoods For 8 9 ceilings Available in Stainless Steel (SS), Black (BK), White (WH), Biscuit (BT), Sne Gray (SG), Graphite Gray (GG). Not needed if using a DCCE1610 Model Description Approx. ship wt. lbs. (kg) DCW24 Professional 24 W. duct cover 9 (4.0) DCW30 Professional 30 W. duct cover 10 (4.5) DCW36 Professional 36 W. duct cover 11 (5.0) DCC16 Designer adjustable duct cover for DCH 30 & 36 models 20 (9.0) R E L E A S E D 2 / 2 0 / V R C INFORMATION SUBJECT TO CHANGE

8 Built-In 10 H. Wall Hood w/ventilar/ 12 H. Chimney Wall Hood w/ventilar 6 H. Wall Hood w/ventilar Installation Notes & Accessories Duct Cover Extension For DCH hoods 16 W. x 12 D. x H. Extends height of hood by up 12 (for 10 ceilings) Replaces adjustable duct cover supplied standard with hood Specify finish code following accessory model number (for example, DCCE1610-SS) Available in Stainless Steel (SS), Black (BK), White (WH), Biscuit (BT), Sne Gray (SG), Graphite Gray (GG). Model Description Approx. ship wt. lbs. (kg) DCCE1610 Designer duct cover extension 7 (15.4) Backsplashes Stainless Steel (SS) 30 H. For all hoods Backsplashes protect the wall space below hood Create a continuous finish between cooking surface and hood Low maintenance, easy clean Hemmed edges with screw holes Kit includes backsplash and fastening screws Model Description Approx. ship wt. lbs. (kg) BKS24 24 W. backsplash 5 (2.3) BKS30 30 W. backsplash 7 (3.2) BKS36 36 W. backsplash 9 (4.1) Warming Shelf Panels Stainless Steel (SS) 12 D. X 12 H. For all hoods Shelf panels hold cookware and condiments Kit includes shelf (or shelves) and fastening screws Fold up/down, heavy-duty warming shelves (non-removable), facry installed on stainless steel backsplash 5-7/8 W. X 10-1/8 D. Model Description Approx. ship wt. lbs. (kg) WGP24 24 W. warming shelf panel (one shelf) 6 (2.7) WGP30 30 W. warming shelf panel (one shelf) 9 (4.1) WGP36 36 W. warming shelf panel (two shelves) 12 (5.4) Compliance Information WARRANTY SUMMARY* One-year full warranty complete product Five-year limited warranty all ventilar mors Ninety-day limited warranty cosmetic parts such as glass, painted, and decorative items * For complete warranty see Use & Care Guide. Warranty valid on Viking products shipped within the United States and Canada. R E L E A S E D 2 / 2 0 / V R C INFORMATION SUBJECT TO CHANGE

9 Standard Features & Accessories VENTILATION Built-In 10 H. Wall Hood w/ventilar/ 12 H. Chimney Wall Hood w/ventilar All models include Heavy-duty construction o Virtually seamless stainless steel design with no visible screws Heat sensor turns the ventilar on full power when cooking temperatures reach uncomfortable levels Recommended for 24 W., 30 W. & 36 W. non-griddle/grill ranges, rangeps, and cookps 460 CFM interior-power ventilar comes standard with product o Variable speed controls for cusm venting separate on/off switch allows you leave ventilar at favorite/most-used setting Two 50-watt halogen lights with dimmer control o Power switch and dimmer control are separate, allowing you leave dimmer at favorite position Easy cleanup o Design of low-profile filter system means less interior hood space be cleaned o Canopy interior is completely lined in stainless steel for increased rigidity, seamless appearance, and easy cleaning Professional 10 H. hoods include Commercial-type size, design, and styling Allow replacement of most older hoods with minimal cabinet alteration Commercial-type baffle filter system efficiently removes grease and heated vapors from the air; especially designed for use with commercialtype products Designer 12 H. hoods include Professional-type size, design, and styling Delay function can be set shut off from minutes later (10 min. increments) 12-hour timer built in controls Two dishwasher-safe stainless steel mesh filters are easily removed for quick cleaning (frame and mesh are stainless steel) Model numbers PROFESSIONAL WALL HOODS, 10 H./21 D. VWH W. o Recommended for use with 24 W. non-griddle/grill ranges (for larger equipment, use 18 H. hood) VWH W. o Recommended for use with 30 W. ranges, 30 W. non-griddle/grill rangeps, and 30 W. cookps VWH W. o Recommended for use with 36 W. non-griddle/grill ranges, 36 W. nongriddle/grill rangeps, and 36 W. cookps DESIGNER CHIMNEY WALL HOODS, 12 H./24 D. DCH W. o Recommended for use with 30 W. ranges, 30 W. non-griddle/grill rangeps, and 30 W. cookps DCH W. o Recommended for use with 36 W. ranges, 36 W. non-griddle/grill rangeps, and 36 W. cookps Model Options VWH Professional Wall Hood DCH Designer Chimney Wall Hood FINISH DETAILS FOR PROFESSIONAL MODELS Stainless Steel (SS), Black (BK), White (WH), Metallic Silver (MS), Graphite Gray (GG), Sne Gray (SG), Taupe (TP), Biscuit (BT), Cotn White (CW), Oyster Gray (OG), Golden Mist (GM), Lemonade (LE), Sage (SA), Mint Julep (MJ), Sea Glass (SE), Iridescent Blue (IB), Viking Blue (VB), Pumpkin (PM), Racing Red (RR), Apple Red (AR), Burgundy (BU), Plum (PL), Chocolate (CH), and Cobalt Blue (CB). Finish designates front and sides. Accessory Rail Option Front of hood. (Must be ordered facry installed) o Stainless Steel/Chrome (CR) Stainless steel rail with chrome supports/brackets and hooks (included). o Brass Trim Option (BR) nameplate, rail, supports/brackets, and hooks (included). Brass components have a durable protective coating for maintenance-free normal use. FINISH DETAILS DESIGNER MODELS Stainless Steel (SS), Black (BK), White (WH), Metallic Silver (MS), Graphite Gray (GG), Sne Gray (SG), Taupe (TP), Biscuit (BT), Cotn White (CW), Oyster Gray (OG), Golden Mist (GM), Lemonade (LE), Sage (SA), Mint Julep (MJ), Sea Glass (SE), Iridescent Blue (IB), Viking Blue (VB), Pumpkin (PM), Racing Red (RR), Apple Red (AR), Burgundy (BU), Plum (PL), Chocolate (CH), and Cobalt Blue (CB). Finish designates front and sides. Accessory Rail Option Front of hood. (Must be ordered facry installed) o Stainless Steel/Chrome (CR) Stainless steel rail with chrome supports/brackets and hooks (included). o Brass Trim Option (BR) rail, supports/brackets, and hooks (included). Brass components have a durable protective coating for maintenance-free normal use. ORDERING INSTRUCTIONS First specify model number, followed by color code (VWH2410SS). If ordering optional decorative rail, specify code at end (VWH2410SSCR). R E L E A S E D 1 0 / 2 / VRC INFORMATION SUBJECT TO CHANGE

10 Please see Installation Notes & Accessories for important information, including conversion kits, filters, duct covers, backsplashes, and warming shelf panels. Dimensions & Specifications PRODUCT DIMENSIONS 12 (30.5 cm) VENTILATION Built-In 10 H. Wall Hood w/ventilar/ 12 H. Chimney Wall Hood w/ventilar VWH Professional Wall Hood DCH Designer Chimney Wall Hood 12 (30.5 cm) 16 (40.6 cm) 6 (15.2 cm) 12 (30.5 cm) (5.1 cm) 18 (45.7 cm) (25.4 cm) (76.2 cm) 12 (30.5 cm) PROFESSIONAL A 21 (53.3 cm) DESIGNER A 24 (61.0 cm) 12 (30.5 cm) 12 (30.5 cm) 16 (40.6 cm) 6 (15.2 cm) 4 (10.2 cm) 2 (5.1 cm) 2 (5.1 cm) 10 (25.4 cm) 12 (30.5 cm) A 21 (53.3 cm) A 24 (61.0 cm) PROFESSIONAL W/RECIRCULATING KIT DESIGNER W/RECIRCULATING KIT Model Hood Duct Cover Lights Filters Heat Approx. Width (A) Height Width Depth Height Lamps Ship. wt. VWH /8 (60.6 cm) 10 (25.4 cm) 23-7/8 12 (30.5 cm) 12 (30.5 cm) 2 2 N/A 48 lbs. (60.6 cm) (21.7 kg) VWH /8 (75.9 cm) 10 (25.4 cm) 29-7/8 12 (30.5 cm) 12 (30.5 cm) 2 2 N/A 56 lbs. (75.9 cm) (25.2 kg) VWH /8 (91.1 cm) 10 (25.4 cm) 35-7/8 12 (30.5 cm) 12 (30.5 cm) 2 2 N/A 60 lbs. (91.1 cm) (27.0 kg) DCH /8 (75.9 cm) 12 (30.5 cm) 16 (40.6 cm) 12 (30.5 cm) 18 (45.7 cm) 2 2 N/A 56 lbs. 30 (76.2 cm) (25.2 kg) DCH /8 (91.1 cm) 12 (30.5 cm) 16 (40.6 cm) 12 (30.5 cm) 18 (45.7 cm) 2 2 N/A 60 lbs. 30 (76.2 cm) (27.0 kg) R E L E A S E D 1 0 / 2 / VRC INFORMATION SUBJECT TO CHANGE

11 Dimensions & Specifications VENTILATION Built-In 10 H. Wall Hood w/ventilar/ 12 H. Chimney Wall Hood w/ventilar CLEARANCE DIMENSIONS 60 min. 24 min. (152.4 cm) (160.0 cm) 63 max. (61.0 cm) (68.6 cm) 27 max.* 36 (91.4 cm) PROFESSIONAL *Note: When installing with a 24 high-shelf, the 27 (68.6 cm) max. dimensions must be used. 66 min. (167.6 cm) (175.3 cm) 69 max. 30 min. (76.2 cm) (83.8 cm) 33 max. 36 (91.4 cm) DESIGNER R E L E A S E D 1 0 / 2 / VRC INFORMATION SUBJECT TO CHANGE

12 Built-In 10 H. Wall Hood w/ventilar/ 12 H. Chimney Wall Hood w/ventilar Installation Requirements VWH Professional Wall Hood DCH Designer Chimney Wall Hood Proper installation/ ducting is extremely important ensure maximum performance. Use a qualified and trained installer. DUCTING 460 CFM interior (blower included) Check with a qualified and trained installer for local codes and makeup air requirements, if any. Max. duct run length 50 (152.4 m) o Duct run length is for general reference only; for longer duct runs, increase duct size and contact a qualified and trained installer. UTILITY REQUIREMENTS o Straight runs and gradual turns are best; for example, each 90 elbow is equivalent 5 10 ( cm) of straight run. 7 round duct o Never use flexible duct; it creates back pressure/air turbulence and greatly reduces performance. GAS Not applicable ELECTRICAL Hardwire direct with two-wire with ground 120 VAC/60 Hz Max. amp usage 5.6 PLUMBING Not applicable Note: All CFMs are based on tests with 0.1 static pressure. Without applying static pressure (some brands do not), CFM could be greatly overstated. Model Interior Ventilar Kits Interior Duct Size Interior Max. Amps VWH CFM standard 7 (17.8 cm) 5.6 VWH CFM standard 7 (17.8 cm) 5.6 VWH CFM standard 7 (17.8 cm) 5.6 DCH CFM standard 7 (17.8 cm) 5.6 DCH CFM standard 7 (17.8 cm) 5.6 R E L E A S E D 1 0 / 2 / VRC INFORMATION SUBJECT TO CHANGE

13 Installation Notes & Accessories Recirculating Hood Conversion Kits Stainless Steel (SS) Eliminates ducting Kit includes o Two charcoal filters o Installation hardware o Top vent/grille Professional 4 H. x 12 D. Designer 2 H. x 12 D. VENTILATION Built-In 10 H. Wall Hood w/ventilar/ 12 H. Chimney Wall Hood w/ventilar Model Description Approx. ship wt. lbs. (kg) VRK24 Professional 24 W. conversion kit 10 (4.5) VRK30 Professional 30 W. conversion kit 13 (5.9) VRK36 Professional 36 W. conversion kit 16 (7.3) DRK30 Designer 30 W. conversion kit 15.4 (7) DRK36 Designer 36 W. conversion kit 15.4 (7) Charcoal Filters For use with VRK & DRK conversion kits Recommended replacement every 6 12 months Model Description Approx. ship wt. lbs. (kg) CFV11 Professional hood filter for 24 W. 1 (0.5) CFV13 Professional hood filter for 30 W. & 36 W. 2 (0.9) CF-D12 Designer hood filter for 30 W. 2 (0.9) CF-D14 Designer hood filter for 36 W. 2 (0.9) Duct Covers Specify finish code following accessory model number (for example, DCW24-SS) o Professional models For VWH hoods 12 D. Extends height of hood by 12 conceals duct Available in Stainless Steel (SS), Black (BK), White (WH), Metallic Silver (MS), Graphite Gray (GG), Sne Gray (SG), Taupe (TP), Biscuit (BT), Cotn White (CW), Oyster Gray (OG), Golden Mist (GM), Lemonade (LE), Sage (SA), Mint Julep (MJ), Sea Glass (SE), Iridescent Blue (IB), Viking Blue (VB), Pumpkin (PM), Racing Red (RR), Apple Red (AR), Burgundy (BU), Plum (PL), Chocolate (CH), and Cobalt Blue (CB). o Designer models For DCH hoods For 8 9 ceilings Available in Stainless Steel (SS), Black (BK), White (WH), Metallic Silver (MS), Graphite Gray (GG), Sne Gray (SG), Taupe (TP), Biscuit (BT), Cotn White (CW), Oyster Gray (OG), Golden Mist (GM), Lemonade (LE), Sage (SA), Mint Julep (MJ), Sea Glass (SE), Iridescent Blue (IB), Viking Blue (VB), Pumpkin (PM), Racing Red (RR), Apple Red (AR), Burgundy (BU), Plum (PL), Chocolate (CH), and Cobalt Blue (CB). Not needed if using a DCCE1610 Model Description Approx. ship wt. lbs. (kg) DCW24 Professional 24 W. duct cover 9 (4.0) DCW30 Professional 30 W. duct cover 10 (4.5) DCW36 Professional 36 W. duct cover 11 (5.0) DCC16 Designer adjustable duct cover for DCH 30 & 36 models 20 (9.0) R E L E A S E D 1 0 / 2 / VRC INFORMATION SUBJECT TO CHANGE

14 Installation Notes & Accessories VENTILATION Built-In 10 H. Wall Hood w/ventilar/ 12 H. Chimney Wall Hood w/ventilar Duct Cover Extension For DCH hoods 16 W. x 12 D. x H. Extends height of hood by up 12 (for 10 ceilings) Replaces adjustable duct cover supplied standard with hood Specify finish code following accessory model number (for example, DCCE1610-SS) Available in Stainless Steel (SS), Black (BK), White (WH), Metallic Silver (MS), Graphite Gray (GG), Sne Gray (SG), Taupe (TP), Biscuit (BT), Cotn White (CW), Oyster Gray (OG), Golden Mist (GM), Lemonade (LE), Sage (SA), Mint Julep (MJ), Sea Glass (SE), Iridescent Blue (IB), Viking Blue (VB), Pumpkin (PM), Racing Red (RR), Apple Red (AR), Burgundy (BU), Plum (PL), Chocolate (CH), and Cobalt Blue (CB). Model Description Approx. ship wt. lbs. (kg) DCCE1610 Designer duct cover extension 7 (15.4) Backsplashes Stainless Steel (SS) 30 H. For both VWH & DCH hoods Backsplashes protect the wall space below hood Create a continuous finish between cooking surface and hood Low maintenance, easy clean Hemmed edges with screw holes Kit includes backsplash and fastening screws Model Description Approx. ship wt. lbs. (kg) BKS24 24 W. backsplash 5 (2.3) BKS30 30 W. backsplash 7 (3.2) BKS36 36 W. backsplash 9 (4.1) Warming Shelf Panels Stainless Steel (SS) 12 D. X 12 H. For both VWH & DCH hoods Shelf panels hold cookware and condiments Kit includes shelf (or shelves) and fastening screws Fold up/down, heavy-duty warming shelves (non-removable), facry installed on stainless steel backsplash 5-7/8 W. X 10-1/8 D. Model Description Approx. ship wt. lbs. (kg) WGP24 24 W. warming shelf panel (one shelf) 6 (2.7) WGP30 30 W. warming shelf panel (one shelf) 9 (4.1) WGP36 36 W. warming shelf panel (two shelves) 12 (5.4) Compliance Information WARRANTY SUMMARY* One-year full warranty complete product Five-year limited warranty all ventilar mors Ninety-day limited warranty cosmetic parts such as glass, painted, and decorative items * For complete warranty see Use & Care Guide. Warranty valid on Viking products shipped within the United States and Canada. R E L E A S E D 1 0 / 2 / VRC INFORMATION SUBJECT TO CHANGE

15 Standard Features & Accessories All models include Must also purchase interior, exterior or in-line ventilar kit, sold separately (see Installation Notes & Accessories for recommended Viking ventilar products) Heavy-duty construction; Professionaltype size, design, and styling o Virtually seamless stainless steel design with no visible screws Heat sensor turns the ventilar on full power when cooking temperatures reach uncomfortable levels Easy cleanup o Commercial-type baffle filter system efficiently removes grease and heated vapors from the air; especially designed for use with commercial-type products See Dimensions & Specifications table for number of filters per model o Design of low-profile filter system means less interior hood space be cleaned o Canopy interior is completely lined in stainless steel for increased rigidity, seamless appearance, and easy cleaning o Separate removable trough catches liquefied grease Model Options Heat lamp(s) standard 250-watt bulb(s) not included o See Dimensions & Specifications table for number of lamps per model o High-shelf (cooking product accessory) or warming shelf panel (see Installation Notes & Accessories) should be installed for use with heat lamp 50-watt halogen lights with dimmer control o Power switch and dimmer control are separate, allowing you leave dimmer at favorite position o See Dimensions & Specifications table for number of lights per model Extra feature on chimney wall hoods Adjustable duct cover (for 8 9 ceilings) is standard Model numbers* WALL HOODS, 24 D.** VWH W. VWH W. VWH W. VWH W. VWH W. VWH W. VWH W. VWH W. VENTILATION Professional Built-In 18 H. Wall Hood/Chimney Wall Hood WALL HOODS, 27 D. VWH W. VWH W. VWH W. CHIMNEY WALL HOODS, 24 D.** VCWH W. VCWH W. VCWH W. VCWH W. VCWH W. VCWH W. VCWH W. *A 1,200 CFM interior or 1,500 CFM exterior (if applicable) ventilar should be used when installed over ranges/rangeps with gas grill. **Tests show 24 D. hoods perform properly over 27 D. ranges. VWH Professional Wall Hood VCWH Professional Chimney Wall Hood FINISH DETAILS Stainless Steel (SS), Black (BK), White (WH), Metallic Silver (MS), Graphite Gray (GG), Sne Gray (SG), Taupe (TP), Biscuit (BT), Cotn White (CW), Oyster Gray (OG), Golden Mist (GM), Lemonade (LE), Sage (SA), Mint Julep (MJ), Sea Glass (SE), Iridescent Blue (IB), Viking Blue (VB), Pumpkin (PM), Racing Red (RR), Apple Red (AR), Burgundy (BU), Plum (PL), Chocolate (CH), and Cobalt Blue (CB). Finish designates front and sides. Accessory Rail Option Front of hood. (Must be ordered facry installed) o Stainless Steel/Chrome (CR) Stainless steel rail with chrome supports/brackets and hooks (included). o Brass Trim Option (BR) nameplate, rail, supports/brackets, and hooks (included). Brass components have a durable protective coating for maintenance-free normal use. ORDERING INSTRUCTIONS First specify model number, followed by color code (VWH2448SS). If ordering optional decorative rail, specify code at end (VWH2448SSCR). R E V I S E D 3 / 1 7 / VRC INFORMATION SUBJECT TO CHANGE

16 Professional Built-In 18 H. Wall Hood/Chimney Wall Hood Please see Installation Notes & Accessories for important information, including ventilar kits, duct covers, backsplashes, and warming shelf panels. Dimensions & Specifications PRODUCT DIMENSIONS VWH Professional Wall Hood 12 (30.5 cm) 12 (30.5 cm) 6 (15.2 cm) 18 (45.7 cm) A B WALL HOOD Model Hood Duct Cover Lights Filters Heat Approx. Width (A) Depth (B) Width Depth Height Lamps Ship. wt. VWH /8 (60.6 cm) 24 (61.0 cm) 23-7/8 12 (30.5 cm) 12 (30.5 cm) lbs. (60.6 cm) (23.6 kg) VWH /8 (75.9 cm) 24 (61.0 cm) 29-7/8 12 (30.5 cm) 12 (30.5 cm) lbs. (75.9 cm) (27.0 kg) VWH /8 (91.1 cm) 24 (61.0 cm) 35-7/8 12 (30.5 cm) 12 (30.5 cm) lbs. (91.1 cm) (30.6 kg) VWH /8 (106.4 cm) 24 (61.0 cm) 41-7/8 12 (30.5 cm) 12 (30.5 cm) lbs. (106.4 cm) (34.2 kg) VWH /8 (121.6 cm) 24 (61.0 cm) 47-7/8 12 (30.5 cm) 12 (30.5 cm) lbs. (121.6 cm) (39.6 kg) VWH /8 (136.8 cm) 24 (61.0 cm) 53-7/8 12 (30.5 cm) 12 (30.5 cm) lbs. (136.8 cm) (43.2 kg) VWH /8 (152.1 cm) 24 (61.0 cm) 59-7/8 12 (30.5 cm) 12 (30.5 cm) lbs. (152.1 cm) (48.6 kg) VWH /8 (167.3 cm) 24 (61.0 cm) 65-7/8 12 (30.5 cm) 12 (30.5 cm) lbs. (167.3 cm) (54.5 kg) VWH /8 (91.1 cm) 27 (68.6 cm) 35-7/8 12 (30.5 cm) 12 (30.5 cm) lbs. (91.1 cm) (33.3 kg) VWH /8 (121.6 cm) 27 (68.6 cm) 47-7/8 12 (30.5 cm) 12 (30.5 cm) lbs. (121.6 cm) (42.3 kg) VWH /8 (152.1 cm) 27 (68.6 cm) 59-7/8 12 (30.5 cm) 12 (30.5 cm) lbs. (152.1 cm) (51.3 kg) R E V I S E D 3 / 1 7 / VRC INFORMATION SUBJECT TO CHANGE

17 Professional Built-In 18 H. Wall Hood/Chimney Wall Hood Please see Installation Notes & Accessories for important information, including ventilar kits, duct covers, backsplashes, and warming shelf panels. Dimensions & Specifications PRODUCT DIMENSIONS VCWH Professional Chimney Wall Hood C B 12 6 (15.2 cm) (30.5 cm) (61.0 cm) (45.7 cm) A 24 (61.0 cm) CHIMNEY WALL HOOD Model Hood Duct Cover Lights Filters Heat Approx. Width (A) Depth Width (B) Depth (C) Height Lamps Ship. wt. VCWH /8 (75.9 cm) 24 (61.0 cm) 12 (30.5 cm) 12 (30.5 cm) 12 (30.5 cm) lbs. 24 (61.0 cm) (54.5 kg) VCWH /8 (91.1 cm) 24 (61.0 cm) 12 (30.5 cm) 12 (30.5 cm) 12 (30.5 cm) lbs. 24 (61.0 cm) (57.7 kg) VCWH /8 (106.4 cm) 24 (61.0 cm) 12 (30.5 cm) 12 (30.5 cm) 12 (30.5 cm) lbs. 24 (61.0 cm) (62.7 kg) VCWH /8 (121.6 cm) 24 (61.0 cm) 18 (45.7 cm) 12 (30.5 cm) 12 (30.5 cm) lbs. 24 (61.0 cm) (65.8 kg) VCWH /8 (136.8 cm) 24 (61.0 cm) 18 (45.7 cm) 12 (30.5 cm) 12 (30.5 cm) lbs. 24 (61.0 cm) (69.5 kg) VCWH /8 (152.1 cm) 24 (61.0 cm) 24 (61.0 cm) 12 (30.5 cm) 12 (30.5 cm) lbs. 24 (61.0 cm) (72.6 kg) VCWH /8 (167.3 cm) 24 (61.0 cm) 24 (61.0 cm) 12 (30.5 cm) 12 (30.5 cm) lbs. 24 (61.0 cm) (75.8 kg) R E V I S E D 3 / 1 7 / VRC INFORMATION SUBJECT TO CHANGE

18 Dimensions & Specifications VENTILATION Professional Built-In 18 H. Wall Hood/Chimney Wall Hood CLEARANCE DIMENSIONS 66 min. (167.6 cm) (182.9 cm) 72 max. 30 min. (76.2 cm) (91.4 cm) 36 max. 36 (91.4 cm) WALL HOOD 66 min. (167.6 cm) (182.9 cm) 72 max. 30 min. (76.2 cm) (91.4 cm) 36 max. 36 (91.4 cm) CHIMNEY WALL HOOD R E V I S E D 3 / 1 7 / VRC INFORMATION SUBJECT TO CHANGE

19 Professional Built-In 18 H. Wall Hood/Chimney Wall Hood Installation Requirements Wall Hood Chimney Wall Hood UTILITY REQUIREMENTS Proper installation/ducting is extremely important ensure maximum performance. Use a qualified and trained installer. DUCTING Check with a qualified and trained installer or local codes for makeup air requirements, if any. Max. duct run o For 300 1,200 CFM 50 (15.2 m) o For 1,500 CFM 75 (22.9 m) o Duct run length is for general reference only; always use a qualified and trained installer. o Straight runs and gradual turns are best; for example, each 90 elbow is equivalent 5 10 ( cm) of straight run. 7 round duct for CFM; 10 for CFM o Never use flexible duct; it creates back pressure/air turbulence and greatly reduces performance. GAS Not applicable ELECTRICAL Hardwire direct with two-wire with ground 120 VAC/60 Hz Max. amp usage (rating includes rec. ventilar kit rating) PLUMBING Not applicable Note: All CFMs are based on tests with 0.1 static pressure. Without applying static pressure (some brands do not), CFM could be greatly overstated. Model Ventilar Kits Duct Size Max. Amps Interior Exterior Interior Exterior Interior Exterior VWH2448 VIV300/600 VEV900/1200*/VIL900/ (17.8 cm) 10 (25.4 cm) 5.0/ /6.1 VWH3048 VIV300/600/1200* VEV900/1200*/VIL900/ (17.8 cm)/10 (25.4 cm) 10 (25.4 cm) 5.0/6.2/ /6.1 VWH3648 VIV300/600/1200* VEV900/1200*/VIL900/ (17.8 cm)/10 (25.4 cm) 10 (25.4 cm) 5.0/6.2/ /6.1 VWH4248 VIV600/1200* VEV900/1200*/VIL900/ (17.8 cm)/10 (25.4 cm) 10 (25.4 cm) 6.2/ /6.1 VWH4848 VIV1200* VEV1200/1500**/VIL (25.4 cm) 10 (25.4 cm) /9.1 VWH5448 VIV1200* VEV1200/1500**/VIL (25.4 cm) 10 (25.4 cm) /9.1 VWH6048 VIV1200* VEV1200/1500**/VIL (25.4 cm) 10 (25.4 cm) /9.5 VWH6648 VIV1200* VEV1200/1500**/VIL (25.4 cm) 10 (25.4 cm) /9.5 VWH3678 VIV300/600/1200* VEV900/1200*/VIL900/ (17.8 cm)/10 (25.4 cm) 10 (25.4 cm) 5.0/6.2/ /6.1 VWH4878 VIV1200* VEV1200/1500**/VIL (25.4 cm) 10 (25.4 cm) /9.1 VWH6078 VIV1200* VEV1200/1500**/VIL (25.4 cm) 10 (25.4 cm) /9.5 VCWH3048 DIV300/600 DEV900/1200*/DIL900/ (17.8 cm) 10 (25.4 cm) 3.9/ /6.0 VCWH3648 DIV300/600* DEV900/1200*/DIL900/ (17.8 cm) 10 (25.4 cm) 3.9/ /6.0 VCWH4248 DIV600* DEV900/1200*/DIL900/ (17.8 cm) 10 (25.4 cm) /6.1 VCWH4848 DIV1200* DEV1200/1500*/DIL (25.4 cm) 10 (25.4 cm) /9.2 VCWH5448 DIV1200* DEV1200/1500/DIL (25.4 cm) 10 (25.4 cm) /9.2 VCWH6048 DIV1200* DEV1200/1500/DIL (25.4 cm) 10 (25.4 cm) /9.7 VCWH6648 DIV1200* DEV1200/1500/DIL (25.4 cm) 10 (25.4 cm) /9.7 * A 1,200 CFM interior- or exterior-power ventilar should be used when installed over range/rangep with gas char-grill. ** It is recommended that the 1,500 CFM ventilar be used with longer duct runs. Note: Maximum amp rating for hoods includes recommended ventilar kit rating; All products must be hard wired with 2-wire with ground. An interioror exterior-power ventilar kit must be purchased for installation with all 18 H. hoods. R E V I S E D 3 / 1 7 / VRC INFORMATION SUBJECT TO CHANGE

20 Professional Built-In 18 H. Wall Hood/Chimney Wall Hood Installation Notes & Accessories Recommended Ventilar Kits See Installation Requirements table for recommendations for each hood model One ventilar, one duct run for any size hood/ventilar Variable speed controls for cusm venting separate on/off switch allows you leave ventilar at favorite/most-used setting Choose from interior- or exterior-power ventilar kits Must use Viking ventilar kits with Viking hoods; use of non-viking kits voids product warranty Kit model Description Hood models Approx. ship wt. lbs. (kg) VIV CFM interior-power VWH2448/3048/3648/ (12.2) VIV CFM interior-power VWH2448/3048/3648/3678/ (12.2) VIV1200 1,200 CFM interior-power VWH3048/3648/3678/4248/4848/ 43 (19.4) 4878/5448/6048/6078/6648 VEV CFM exterior-power VWH2448/3048/3648/3678/ (17.6) VEV1200 1,200 CFM exterior-power VWH2448/3048/3648/3678/4248/ 53 (23.9) 4848/4878/5448/6048/6078/6648 VEV1500 1,500 CFM exterior-power VWH4848/4878/5448/6048/6078/ (21.3) DIV CFM interior-power VCWH3048/ (6.8) DIV CFM interior-power VCWH3048/3648/ (12.2) DIV1200 1,200 CFM interior-power VCWH4848/5448/6048/ (19.4) DEV CFM exterior-power VCWH3048/3648/ (17.6) DEV1200 1,200 CFM exterior-power VCWH3048/3648/4248/4848/5448/6048/ (23.9) DEV1500 1,500 CFM exterior-power VCWH4848/5448/6048/ (21.3) VIL CFM in-line power VWH2448/3048/3648/3678/ (9.1) VIL1200 1,200 CFM in-line power VWH2448/3048/3648/3678/4248/ 25 (11.3) 4848/4878/5448/6048/6078/6648 DIL CFM in-line power VCWH3048/3648/ (9.1) DIL1200 1,200 CFM in-line power VCWH3048/3648/4248/4848/5448/6048/ (11.3) Duct Covers Specify finish code following accessory model number (for example, DCW24-SS) o Professional models For VWH/VCWH hoods 12 D. Extends height of hood by 12 conceals duct Available in Stainless Steel (SS), Black (BK), White (WH), Metallic Silver (MS), Graphite Gray (GG), Sne Gray (SG), Taupe (TP), Biscuit (BT), Cotn White (CW), Oyster Gray (OG), Golden Mist (GM), Lemonade (LE), Sage (SA), Mint Julep (MJ), Sea Glass (SE), Iridescent Blue (IB), Viking Blue (VB), Pumpkin (PM), Racing Red (RR), Apple Red (AR), Burgundy (BU), Plum (PL), Chocolate (CH), and Cobalt Blue (CB). Model Description Approx. ship wt. lbs. (kg) DCW24 Professional 24 W. duct cover 9 (4.0) DCW30 Professional 30 W. duct cover 10 (4.5) DCW36 Professional 36 W. duct cover 11 (5.0) DCW42 Professional 42 W. duct cover 13 (5.9) DCW48 Professional 48 W. duct cover 14 (6.3) DCW54 Professional 54 W. duct cover 23 (10.4) DCW60 Professional 60 W. duct cover 24 (10.8) DCW66 Professional 66 W. duct cover 26 (11.7) Duct Cover Extensions For use with Professional chimney wall hoods (VCWH) Extends height of hood by up 12 (for 10 ceilings) Replaces adjustable duct cover supplied with hood Specify finish code following accessory model number (for example, DCCE1210-SS) o Available in Stainless Steel (SS), Black (BK), White (WH), Metallic Silver (MS), Graphite Gray (GG), Sne Gray (SG), Taupe (TP), Biscuit (BT), Cotn White (CW), Oyster Gray (OG), Golden Mist (GM), Lemonade (LE), Sage (SA), Mint Julep (MJ), Sea Glass (SE), Iridescent Blue (IB), Viking Blue (VB), Pumpkin (PM), Racing Red (RR), Apple Red (AR), Burgundy (BU), Plum (PL), Chocolate (CH), and Cobalt Blue (CB). Model Description Approx. ship wt. lbs. (kg) DCCE1210 Duct cover extension (for 30 W., 36 W., & 42 W. hoods) 6 (2.7) DCCE1810 Duct cover extension (for 48 W. & 54 W. hoods) 8 (3.6) DCCE2410 Duct cover extension (for 60 W. & 66 W. hoods) 11 (4.9) R E V I S E D 3 / 1 7 / VRC INFORMATION SUBJECT TO CHANGE

21 Professional Built-In 18 H. Wall Hood/Chimney Wall Hood Installation Notes & Accessories Backsplashes Stainless Steel (SS) 30 H. For both VWH & VCWH hoods Backsplashes protect the wall space below hood Create a continuous finish between cooking surface and hood Low maintenance, easy clean Hemmed edges with screw holes Kit includes backsplash and fastening screws Model Description Approx. ship wt. lbs. (kg) BKS24 24 W. backsplash 5 (2.3) BKS30 30 W. backsplash 7 (3.2) BKS36 36 W. backsplash 9 (4.1) BKS42 42 W. backsplash 12 (5.4) BKS48 48 W. backsplash 14 (6.3) BKS54 54 W. backsplash 17 (7.7) BKS60 60 W. backsplash 20 (9.0) BKS66 66 W. backsplash 23 (10.4) Warming Shelf Panels Stainless Steel (SS) 12 D./12 H. For both VWH & DCH hoods Shelf panels hold cookware and condiments Fold up/down, heavy-duty warming shelves (non-removable), facry installed on stainless steel backsplash 15-7/8 W. X 10-1/8 D. Kit includes shelf (or shelves) and fastening screws. Model Description Approx. ship wt. lbs. (kg) WGP24 24 W. warming shelf panels (one shelf) 6 (2.7) WGP30 30 W. warming shelf panels (one shelf) 9 (4.1) WGP36 36 W. warming shelf panels (two shelves) 12 (5.4) WGP42 42 W. warming shelf panels (two shelves) 14 (6.3) WGP48 48 W. warming shelf panels (two shelves) 16 (7.2) WGP54 54 W. warming shelf panels (two shelves) 20 (9.0) WGP60 60 W. warming shelf panels (three shelves) 23 (10.4) WGP66 66 W. warming shelf panels (three shelves) 26 (11.7) Compliance Information WARRANTY SUMMARY* One-year full warranty complete product Five-year limited warranty all ventilar mors Ninety-day limited warranty cosmetic parts such as glass, painted, and decorative items *Must use Viking ventilar kits with Viking hoods; use of non-viking kits voids product warranty. For complete warranty see Use & Care Guide. Warranty valid on Viking products shipped within the United States and Canada. R E V I S E D 3 / 1 7 / VRC INFORMATION SUBJECT TO CHANGE

22 Standard Features & Accessories All models include Adjustable duct cover (for 8 9 ceilings) is standard Must also purchase interior, exterior or in-line ventilar kit, sold separately (see Installation Notes & Accessories for recommended Viking ventilar products) Heat sensor turns the ventilar on full power when cooking temperatures reach uncomfortable levels Variable speed controls for cusm venting separate on/off switch allows you leave ventilar at favorite/mostused setting 12-hour timer built in ventilar controls Delay feature allows you set the ventilar shut off on its own from minutes later 24 D. (tests show 24 D. hoods perform properly over 27 D. ranges) Heavy-duty construction; sleek, contemporary design and styling Model Options VENTILATION Built-In Classic Chimney Wall Hood Standard, w/ledge, & Ledgeless o Virtually seamless stainless steel design with no visible screws Easy cleanup o Dishwasher-safe, stainless steel mesh filters efficiently remove grease and heated vapors from the air, and are easily removed for quick cleaning (frame and mesh are stainless steel) See Dimensions & Specifications table for number of filters per model o Design of low-profile filter system means less interior hood space be cleaned o Canopy interior is completely lined in stainless steel for increased rigidity, seamless appearance, and easy cleaning 50-watt halogen lights with dimmer control Power switch and dimmer control are separate, allowing you leave dimmer at favorite position o See Dimensions & Specifications table for number of lights per model Model numbers CLASSIC CHIMNEY WALL HOODS DCWH W./12 H. DCWH W./14 H. DCWH W./14 H. DCWH W./14 H. CLASSIC CHIMNEY WALL HOODS WITH LEDGE DCWL W./12 H. DCWL W./14 H. DCWL W./14 H. DCWL W./14 H. CLASSIC CHIMNEY WALL HOODS, LEDGELESS DCWN "W./12"H. DCWN "W./14"H. DCWN "W./14"H. DCWN "W./14"H. DCWH Designer Chimney Wall Hood* FINISH DETAILS Stainless Steel (SS), Black (BK), White (WH), Metallic Silver (MS), Graphite Gray (GG), Sne Gray (SG), Taupe (TP), Biscuit (BT), Cotn White (CW), Oyster Gray (OG), Golden Mist (GM), Lemonade (LE), Sage (SA), Mint Julep (MJ), Sea Glass (SE), Iridescent Blue (IB), Viking Blue (VB), Pumpkin (PM), Racing Red (RR), Apple Red (AR), Burgundy (BU), Plum (PL), Chocolate (CH), and Cobalt Blue (CB). Accessory Rail Option* Front of hood. (Must be ordered facry installed. Rail not available on ledge & ledgeless models.) DCWL Designer Chimney Wall Hood w/ledge* o Stainless Steel/Chrome (CR) Stainless steel rail with chrome supports/brackets and hooks (included). o Brass Rail Option (BR) nameplate, rail, supports/brackets, and hooks (included). Brass components have a durable protective coating for maintenance-free normal use. DCWN Designer Chimney Ledgeless Wall Hood* *Shown throughout with adjustable duct cover, included. ORDERING INSTRUCTIONS First specify model number, followed by color code (DCWH3042SS). If ordering optional decorative rail, specify code at end (DCWH3042SSCR). R E V I S E D 3 / 1 7 / VRC INFORMATION SUBJECT TO CHANGE

23 Built-In Classic Chimney Wall Hood Standard Please see Installation Notes & Accessories for important information, including ventilar kits, duct covers, backsplashes, and warming shelf panels. Dimensions & Specifications PRODUCT DIMENSIONS DCWH Designer Chimney Wall Hood 12 (30.5 cm) C D 2 (5.1 cm) B CHIMNEY WALL HOOD A 24 (61.0 cm) Model Hood Duct Cover Lights Filters Heat Approx. Width (A) Height (B) Width (C) Depth Height (D) Lamps Ship. wt. DCWH /8 (75.9 cm) 12 (30.5 cm) 10 (25.4 cm) 12 (30.5 cm) 18 (45.7 cm) 2 2 N/A 51 lbs. 30 (76.2 cm) (23.1 kg) DCWH /8 (91.1 cm) 14 (35.6 cm) 12 (30.5 cm) 12 (30.5 cm) 16 (40.6 cm) 2 2 N/A 61 lbs. 28 (71.1 cm) (27.7 kg) DCWH /8 (106.4 cm) 14 (35.6 cm) 12 (30.5 cm) 12 (30.5 cm) 16 (40.6 cm) 2 3 N/A 71 lbs. 28 (71.1 cm) (32.2 kg) DCWH /8 (121.6 cm) 14 (35.6 cm) 18 (45.7 cm) 12 (30.5 cm) 16 (40.6 cm) 3 3 N/A 82 lbs. 28 (71.1 cm) (37.2 kg) R E V I S E D 3 / 1 7 / VRC INFORMATION SUBJECT TO CHANGE

24 Please see Installation Notes & Accessories for important information, including ventilar kits, duct covers, backsplashes, and warming shelf panels. Dimensions & Specifications PRODUCT DIMENSIONS DCWL Designer Chimney Wall Hood w/ledge VENTILATION Built-In Classic Chimney Wall Hood w/ledge, & Ledgeless DCWN Designer Chimney Ledgeless Wall Hood 12 (30.5 cm) C 12 (30.5 cm) C D D 2 (5.1 cm) B B CHIMNEY WALL HOOD LEDGE A 25-1/2 (64.8 cm) CHIMNEY WALL HOOD LEDGELESS A 24 (61.0 cm) Model Hood Duct Cover Lights Filters Heat Approx. Width (A) Height (B) Width (C) Depth Height (D) Lamps Ship. wt. DCWL /8 (83.5 cm) 12 (30.5 cm) 10 (25.4 cm) 12 (30.5 cm) 18 (45.7 cm) 2 2 N/A 54 lbs. 30 (76.2 cm) (24.5 kg) DCWL /8 (98.4 cm) 14 (35.5 cm) 12 (30.5 cm) 12 (30.5 cm) 16 (40.6 cm) 2 2 N/A 64 lbs. 28 (71.1 cm) (29.0 kg) DCWL /8 (114.0 cm) 14 (35.5 cm) 12 (30.5 cm) 12 (30.5 cm) 16 (40.6 cm) 2 3 N/A 74 lbs. 28 (71.1 cm) (33.6 kg) DCWL /8 (129.2 cm) 14 (35.5 cm) 18 (45.7 cm) 12 (30.5 cm) 16 (40.6 cm) 3 3 N/A 85 lbs. 28 (71.1 cm) (38.6 kg) DCWN /8 (75.9 cm) 12 (30.5 cm) 10 (25.4 cm) 12 (30.5 cm) 18 (45.7 cm) 2 2 N/A 51 lbs. 30 (76.2 cm) (23.1 kg) DCWN /8 (91.1 cm) 14 (35.5 cm) 12 (30.5 cm) 12 (30.5 cm) 16 (40.6 cm) 2 2 N/A 61 lbs. 28 (71.1 cm) (27.7 kg) DCWN /8 (106.4 cm) 14 (35.5 cm) 12 (30.5 cm) 12 (30.5 cm) 16 (40.6 cm) 2 3 N/A 71 lbs. 28 (71.1 cm) (32.2 kg) DCWN /8 (121.6 cm) 14 (35.5 cm) 18 (45.7 cm) 12 (30.5 cm) 16 (40.6 cm) 3 3 N/A 82 lbs. 28 (71.1 cm) (37.2 kg) R E V I S E D 3 / 1 7 / VRC INFORMATION SUBJECT TO CHANGE

25 Dimensions & Specifications VENTILATION Built-In Classic Chimney Wall Hood Standard, w/ledge, & Ledgeless CLEARANCE DIMENSIONS 66 min. (167.6 cm) (182.9 cm) 72 max. 30 min. (76.2 cm) (91.4 cm) 36 max. 36 (91.4 cm) CHIMNEY WALL HOOD 66 min. (167.6 cm) (182.9 cm) 72 max. 30 min. (76.2 cm) (91.4 cm) 36 max. 36 (91.4 cm) CHIMNEY WALL HOOD LEDGE/LEDGELESS Note: For best performance and safe, efficient operation, it is recommended that the botm of the hood be 30 (76.2 cm) 33 (83.8 cm) above the counterp. R E V I S E D 3 / 1 7 / VRC INFORMATION SUBJECT TO CHANGE

26 Installation Requirements VENTILATION Built-In Classic Chimney Wall Hood Standard, w/ledge, & Ledgeless DCWH Designer Chimney Wall Hood Proper installation/ducting is extremely important ensure maximum performance. Use a qualified and trained installer. VENTILATION Check with a qualified and trained installer or local codes for makeup air requirements, if any. Max. duct run o For 300 1,200 CFM 50 (15.2 m) o For 1,500 CFM 75 (22.9 m) o Duct run length is for general reference only; always use a qualified and trained installer. DCWL Designer Chimney Wall Hood w/ledge UTILITY REQUIREMENTS o Straight runs and gradual turns are best; for example, each 90 elbow is equivalent 5 10 ( cm) of straight run. 7 round duct for CFM; 10 for CFM o Never use flexible duct; it creates back pressure/air turbulence and greatly reduces performance. GAS Not applicable DCWN Designer Chimney Ledgeless Wall Hood ELECTRICAL Hardwire direct with two-wire with ground 120 VAC/60 Hz Max. amp usage (rating includes rec. ventilar kit rating) PLUMBING Not applicable Note: All CFMs are based on tests with 0.1 static pressure. Without applying static pressure (some brands do not), CFM could be greatly overstated. Model Ventilar kits Duct size Max. amps Interior Exterior Interior Exterior Interior Exterior DCWH3042 DIV300/DIV440 DEV900/DEV (17.8 cm) 10 (25.4 cm) 1.7/ /3.9 DIL900/1200 DCWH3644 DIV300/DIV600* DEV900/DEV1200* 7 (17.8 cm) 10 (25.4 cm) 1.7/ /3.9 DIL900/1200 DCWH4244 DIV600 DEV900/DEV1200* 7 (17.8 cm) 10 (25.4 cm) /3.9 DIL900/1200 DCWH4844 DIV1200* DEV1200/DEV1500** 10 (25.4 cm) 10 (25.4 cm) /5.1 DIL1200 DCWL3342 DIV300/DIV440 DEV900/DEV (17.8 cm) 10 (25.4 cm) 1.7/ /3.9 DIL900/1200 DCWL3944 DIV300/DIV600* DEV900/DEV1200* 7 (17.8 cm) 10 (25.4 cm) 1.7/ /3.9 DIL900/1200 DCWL4544 DIV600 DEV900/DEV1200* 7 (17.8 cm) 10 (25.4 cm) /3.9 DIL900/1200 DCWL5144 DIV1200 DEV1200/DEV1500** 10 (25.4 cm) 10 (25.4 cm) /5.1 DIL1200 DCWN3042 DIV300/DIV440 DEV900/DEV (17.8 cm) 10 (25.4 cm) 1.7/ /3.9 DIL900/1200 DCWN3644 DIV300/DIV600* DEV900/DEV1200* 7 (17.8 cm) 10 (25.4 cm) 1.7/ /3.9 DIL900/1200 DCWN4244 DIV600 DEV900/DEV1200* 7 (17.8 cm) 10 (25.4 cm) /3.9 DIL900/1200 DCWN4844 DIV1200* DEV1200/DEV1500** 10 (25.4 cm) 10 (25.4 cm) /5.1 DIL1200 * A 1,200 CFM interior- or exterior-power ventilar should be used when installed over range/rangep with gas char-grill. ** It is recommended that the 1,500 CFM ventilar be used with longer duct runs. Note: Maximum amp rating for hoods includes recommended ventilar kit rating. All products must be hard wired with two-wire ground. An interior- or exterior-power ventilar kit must be purchased for installation with all 18 H. hoods. R E V I S E D 3 / 1 7 / VRC INFORMATION SUBJECT TO CHANGE

27 Installation Notes & Accessories VENTILATION Built-In Classic Chimney Wall Hood Standard, w/ledge, & Ledgeless Recommended Ventilar Kits See Installation Requirements table for recommendations for each hood model One ventilar, one duct run for any size hood/ventilar A 1,200 CFM interior or 1,500 CFM exterior (if applicable) ventilar should be used over ranges/rangeps with gas grill Must use Viking ventilar kits with Viking hoods; use of non-viking kits voids product warranty Kit model Description Hood models Approx. ship wt. lbs. (kg) DIV CFM interior-power DCWH3042/3644, DCWL3342/3944, & 15 (6.8) DCWN3042/3644 DIV CFM interior-power DCWH3042, DCWL3342, & DCWN (11.3) DIV CFM interior-power DCWH3644/4244, DCWL3944/4544, & 27 (12.2) DCWN3644/4244 DIV1200 1,200 CFM interior-power DCWH4844, DCWN5144, & DCWN (19.4) DEV CFM exterior-power DCWH3042/3642/4244, DCWL3342/3944/4544, & 39 (17.6) DCWN3042/3644/4244 DEV1200 1,200 CFM exterior-power DCWH3042/3644/4244/4844, DCWL3342/3944/ 53 (23.9) 4544/5144, & DCWN3042/3644/4244/4844 DEV1500 1,500 CFM exterior-power DCWH4844, DCWL5144, & DCWN (21.3) DIL CFM in-line power DCWH3042/3642/4244, DCWL3342/3944/4544, & 20 (9.1) DCWN3042/3644/4244 DIL1200 1,200 CFM in-line power DCWH3042/3644/4244/4844, DCWL3342/3944/ 25 (11.3) 4544/5144, & DCWN3042/3644/4244/4844 Duct Cover Extensions For use with DCWH, DCWL, & DCWN hoods Extends height of hood by up 12 (for 10 ceilings) Replaces adjustable duct cover supplied with hood Specify finish code following accessory model number (for example, DCCE1010-SS) Available in Stainless Steel (SS), Black (BK), White (WH), Metallic Silver (MS), Graphite Gray (GG), Sne Gray (SG), Taupe (TP), Biscuit (BT), Cotn White (CW), Oyster Gray (OG), Golden Mist (GM), Lemonade (LE), Sage (SA), Mint Julep (MJ), Sea Glass (SE), Iridescent Blue (IB), Viking Blue (VB), Pumpkin (PM), Racing Red (RR), Apple Red (AR), Burgundy (BU), Plum (PL), Chocolate (CH), and Cobalt Blue (CB). Model Description Approx. ship wt. lbs. (kg) DCCE1010 Duct cover extension (for 30 & 33 W. hoods 10 W. x 12 D. x H.) 4 (1.8) DCCE1210 Duct cover extension (for 30, 39, 42, & 45 W. hoods 12 W. x 12 D. x H.) 6 (2.7) DCCE1810 Duct cover extension (for 48 & 51 W. hoods 18 W. x 12 D. x H.) 8 (3.6) Backsplashes Stainless Steel (SS) 30 H. Backsplashes protect the wall space below hood Create a continuous finish between cooking surface and hood Low maintenance, easy clean Hemmed edges with screw holes Kit includes backsplash and fastening screws Model Description Approx. ship wt. lbs. (kg) BKS30 30 W. backsplash 7 (3.2) BKS36 36 W. backsplash 9 (4.1 BKS42 42 W. backsplash 12 (5.4) BKS48 48 W. backsplash 14 (6.3) BKS54 54 W. backsplash 17 (7.7) R E V I S E D 3 / 1 7 / VRC INFORMATION SUBJECT TO CHANGE

28 Installation Notes & Accessories VENTILATION Built-In Classic Chimney Wall Hood Standard, w/ledge, & Ledgeless Warming Shelf Panels Stainless Steel (SS) 12 D./12 H. Shelf panels hold cookware and condiments Fold up/down, heavy-duty warming shelves (non-removable), facry installed on stainless steel backsplash 15-7/8 W. X 10-1/8 D. Kit includes shelf (or shelves) and fastening screws Model Description Approx. ship wt. lbs. (kg) WGP30 30 W. warming shelf panels (one shelf) 9 (4.1) WGP36 36 W. warming shelf panels (two shelves) 12 (5.4) WGP42 42 W. warming shelf panels (two shelves) 14 (6.3) WGP48 48 W. warming shelf panels (two shelves) 16 (7.2) WGP54 54 W. warming shelf panels (two shelves) 20 (9.0) Compliance Information WARRANTY SUMMARY* One-year full warranty complete product Five-year limited warranty all ventilar mors Ninety-day limited warranty cosmetic parts such as glass, painted, and decorative items *Must use Viking ventilar kits with Viking hoods; use of non-viking kits voids product warranty. For complete warranty see Use & Care Guide. Warranty valid on Viking products shipped within the United States and Canada. R E V I S E D 3 / 1 7 / VRC INFORMATION SUBJECT TO CHANGE

29 Standard Features & Accessories VENTILATION Built-In Island/Classic Chimney Island Hood All models include Must also purchase interior or exterior ventilar kit, sold separately (see Installation Notes & Accessories for recommended Viking ventilar products 30 D. Heat sensor turns the ventilar on full power when cooking temperatures reach uncomfortable levels Variable speed controls for cusm venting separate on/off switch allows you leave ventilar at favorite/most-used setting Heavy-duty construction; professionaltype size, design, and styling o Virtually seamless stainless steel design with no visible screws Easy cleanup o Design of low-profile filter system means less interior hood space be cleaned o Canopy interior is completely lined in stainless steel for increased rigidity, seamless appearance, and easy cleaning 50-watt halogen lights with dimmer control Model Options o Power switch and dimmer control are separate, allowing you leave dimmer at favorite position o See Dimensions & Specifications table for number of lights per model Professional models include 18"H. Commercial-type baffle filter system efficiently removes grease and heated vapors from the air; especially designed for use with commercialtype products See Dimensions & Specifications table for number of filters per model Removable trough catches liquefied grease Duct cover must be ordered separately (see Installation Notes & Accessories) Designer models include 14"H. 12-hour timer built in ventilar controls Dishwasher-safe, stainless steel mesh filters efficiently remove grease and heated vapors from the air, and are easily removed for quick cleaning (frame and mesh are stainless steel); especially designed for use with commercial-type products See Dimensions & Specifications table for number of filters per model Delay feature allows you set the ventilar shut off on its own from minutes later Duct cover must be ordered separately (see Installation Notes & Accessories) covers available for installations with 8, 9, or 10' ceilings Model numbers VIH ISLAND HOODS VIH "W. VIH "W. VIH "W. VIH "W. VCIH CLASSIC CHIMNEY ISLAND HOODS VCIH "W. VCIH "W. VCIH "W. VCIH "W. DCIH CLASSIC CHIMNEY ISLAND HOODS DCIH "W. DCIH "W. DCIH "W. VIH Professional Island Hood* FINISH DETAILS Stainless Steel (SS), Black (BK), White (WH), Metallic Silver (MS), Graphite Gray (GG), Sne Gray (SG), Taupe (TP), Biscuit (BT), Cotn White (CW), Oyster Gray (OG), Golden Mist (GM), Lemonade (LE), Sage (SA), Mint Julep (MJ), Sea Glass (SE), Iridescent Blue (IB), Viking Blue (VB), Pumpkin (PM), Racing Red (RR), Apple Red (AR), Burgundy (BU), Plum (PL), Chocolate (CH), and Cobalt Blue (CB). Finish designates front, back, and sides. VCIH Professional Classic Chimney Island Hood* EXTRA FINISH DETAILS FOR VIH/VCIH MODELS Accessory Rail Option front/back or front/back/sides (must be ordered facry installed) o Stainless Steel/Chrome (CR) Stainless steel rail with chrome supports/brackets and hooks (included) CR2 front/back CR4 front/back/sides o Brass Trim Option (BR) nameplate, rail, supports/brackets, and hooks (included). Brass components have a durable protective coating for maintenance-free normal use. BR2 front/back BR4 front/back/sides DCIH Designer Chimney Island Hood* EXTRA FINISH DETAILS FOR DCIH MODELS Accessory Rail Option around entire hood (must be ordered facry installed) o Stainless Steel/Chrome (CR4) Stainless steel rail with chrome supports/brackets and hooks (included) o Brass Trim Option (BR4) rail, supports/brackets, and hooks (included). Brass components have a durable protective coating for maintenance-free normal use. *Shown throughout with duct cover, sold separately (see Installation Notes & Accessories). ORDERING INSTRUCTIONS First specify model number, followed by color code (VIH3608SS). If ordering optional decorative rail(s), specify code at end (VIH3608SSCR). R E L E A S E D 1 0 / 2 / VRC INFORMATION SUBJECT TO CHANGE

30 Built-In Island/Classic Chimney Island Hood Please see Installation Notes & Accessories for important information, including ventilar kits and duct covers. Dimensions & Specifications PRODUCT DIMENSIONS VIH Professional Island Hood 12 (30.5 cm) B VCIH Professional Classic Chimney Island Hood 12 (30.5 cm) B DCIH Designer Chimney Island Hood 12 (30.5 cm) B 6 (15.2 cm) C 6 (15.2 cm) C 2 (5.1 cm) C 18 (45.7 cm) 18 (45.7 c 14 (35.6 cm) A 30 (76.2 cm) A 30 (76.2 cm) A 30 (76.2 cm) PROFESSIONAL ISLAND HOOD PROFESSIONAL CLASSIC CHIMNEY ISLAND HOOD DESIGNER CHIMNEY ISLAND HOOD Model Hood Duct Cover Lights Filters Heat Approx. Width (A) Height Width (B) Depth Height (C) Lamps Ship. wt. VIH /8 (91.1 cm) 18 (45.7 cm) 35-7/8 12 (30.5 cm) 12 (30.5 cm) 4 4 N/A 81 lbs. (91.1 cm) (36.5 kg) VIH /8 (106.4 cm) 18 (45.7 cm) 41-7/8 12 (30.5 cm) 12 (30.5 cm) 4 4 N/A 92 lbs. (106.4 cm) (41.4 kg) VIH /8 (136.8 cm) 18 (45.7 cm) 53-7/8 12 (30.5 cm) 12 (30.5 cm) 6 6 N/A 127 lbs. (136.8 cm) (57.2 kg) VIH /8 (167.3 cm) 18 (45.7 cm) 65-7/8 12 (30.5 cm) 12 (30.5 cm) 8 8 N/A 142 lbs. (167.3 cm) (63.9 kg) VCIH /8 (91.1 cm) 18 (45.7 cm) 12 (30.5 cm) 12 (30.5 cm) 12 (30.5 cm) 4 4 N/A 92 lbs. 24 (61.0 cm) (41.1 kg) 36 (91.4 cm) VCIH /8 (106.4 cm) 18 (45.7 cm) 12 (30.5 cm) 12 (30.5 cm) 12 (30.5 cm) 4 4 N/A 127 lbs. 24 (61.0 cm) (57.4 kg) 36 (91.4 cm) VCIH /8 (136.8 cm) 18 (45.7 cm) 18 (45.7 cm) 12 (30.5 cm) 12 (30.5 cm) 6 6 N/A 142 lbs. 24 (61.0 cm) (63.9 kg) 36 (91.4 cm) VCIH /8 (167.3 cm) 18 (45.7 cm) 24 (70.0 cm) 12 (30.5 cm) 12 (30.5 cm) 8 8 N/A 158 lbs. 24 (61.0 cm) (71.6 kg) 36 (91.4 cm) DCIH /8 (91.1 cm) 14 (35.6 cm) 12 (30.5 cm) 12 (30.5 cm) 16 (40.6 cm) 4 2 N/A 92 lbs. 28 (71.1 cm) (41.4 kg) 40 (101.6 cm) DCIH /8 (106.4 cm) 14 (35.6 cm) 12 (30.5 cm) 12 (30.5 cm) 16 (40.6 cm) 4 3 N/A 105 lbs. 28 (71.1 cm) (47.3 kg) 40 (101.6 cm) DCIH /8 (136.8 cm) 14 (35.6 cm) 18 (45.7 cm) 12 (30.5 cm) 16 (40.6 cm) 6 3 N/A 148 lbs. 28 (71.1 cm) (66.6 kg) 40 (101.6 cm) R E L E A S E D 1 0 / 2 / VRC INFORMATION SUBJECT TO CHANGE

31 Built-In Island/Classic Chimney Island Hood Dimensions & Specifications CLEARANCE DIMENSIONS 66 min. (167.6 cm) (182.9 cm) 72 max. 30 min. 36 max. (76.2 cm) 66 min. (167.6 cm) (182.9 cm) 72 max. 30 min. (76.2 cm) (91.4 cm) 36 max. (91.4 cm) 36 (91.4 cm) 36 (91.4 cm) PROFESSIONAL ISLAND HOOD PROFESSIONAL CLASSIC CHIMNEY ISLAND HOOD 66 min. 30 min. (167.6 cm) (182.9 cm) 72 max. (76.2 cm) (91.4 cm) 36 max. 36 (91.4 cm) DESIGNER CHIMNEY ISLAND HOOD R E L E A S E D 1 0 / 2 / VRC INFORMATION SUBJECT TO CHANGE

32 Built-In Island/Classic Chimney Island Hood Installation Requirements VIH Professional Island Hood VCIH Professional Classic Chimney Island Hood DCIH Designer Chimney Island Hood Proper installation/ducting is extremely important ensure maximum performance. Use a qualified and trained installer. DUCTING Check with a qualified and trained installer or local codes for makeup air requirements, if any. Max. duct run o For 300 1,200 CFM 50 (152.4 m) o For 1,500 CFM 75 (22.9 m) o Duct run length is for general reference only; for longer duct runs, increase duct size and contact a qualified and trained installer. UTILITY REQUIREMENTS o Straight runs and gradual turns are best; for example, each 90 elbow is equivalent 5 10 ( cm) of straight run. 7 (17.8 cm) round duct for CFM; 10 for CFM o Never use flexible duct; it creates back pressure/air turbulence and greatly reduces performance. GAS Not applicable ELECTRICAL Hardwire direct with two-wire with ground 120 VAC/60 Hz Max. amp usage (rating includes rec. ventilar kit rating) PLUMBING Not applicable Note: All CFMs are based on tests with 0.1 static pressure. Without applying static pressure (some brands do not), CFM could be greatly overstated. Model Ventilar Kits Duct Size Max. Amps Interior Exterior Interior Exterior Interior Exterior VIH3608 VIV600/1200* VEV900/1200* 7 (17.8 cm)/ 10 (25.4 cm) 4.9/ /4.7 VIL900/1200* 10 (25.4 cm) VIH4208 VIV600/1200* VEV900/1200/1500* 7 (17.8 cm)/ 10 (25.4 cm) 4.9/ /4.7/5.5 VIL900/1200* 10 (25.4 cm) VIH5408 VIV1200* VEV1200/1500**/VIL (25.4 cm) 10 (25.4 cm) /6.2 VIH6608 VIV1200* VEV1200/1500**/VIL (25.4 cm) 10 (25.4 cm) /6.2 VCIH3608 DIV600* DEV900/1200* 7 (17.8 cm) 10 (25.4 cm) /3.9 DIL900/1200 VCIH4208 DIV600* DEV900/1200/1500* 7 (17.8 cm) 10 (25.4 cm) /4.8/5.5 DIL900/1200 VCIH5408 DIV1200* DEV1200/1500**/DIL (25.4 cm) 10 (25.4 cm) /6.4 VCIH6608 DIV1200* DEV1200/1500**/DIL (25.4 cm) 10 (25.4 cm) /7.3 DCIH3604 DIV600 DEV900/DEV1200*/DIL900 7 (17.8 cm) 10 (25.4 cm) DCIH4204 DIV600 DEV1200/DEV1500** 7 (17.8 cm) 10 (25.4 cm) /4.7/5.5 DIL1200 DCIH5404 DIV1200* DEV1200/DEV1500** 10 (25.4 cm) 10 (25.4 cm) /6.4 DIL1200 * A 1,200 CFM interior- or exterior-power ventilar should be used when installed over range/rangep with gas char-grill. ** It is recommended that the 1,500 CFM ventilar be used with longer duct runs. Note: Maximum amp rating for hoods includes recommended ventilar kit rating. All products must be hard wired with two-wire ground. An interior- or exterior-power ventilar kit must be purchased for installation with all 18 H. hoods. R E L E A S E D 1 0 / 2 / VRC INFORMATION SUBJECT TO CHANGE

33 Built-In Island/Classic Chimney Island Hood Installation Notes & Accessories Ventilar Kits See Installation Requirements table for recommendations for each hood model One ventilar, one duct run for any size hood/ventilar A 1,200 CFM interior or 1,500 CFM exterior (if applicable) ventilar should be used over ranges/rangeps with gas grill Must use Viking ventilar kits with Viking hoods; use of non-viking kits voids product warranty Kit model Description Hood models Approx. ship wt. lbs. (kg) VIV CFM interior-power VIH3608/ (12.2) VIV1200 1,200 CFM interior-power VIH3608/4208/5408/ (19.4) VEV CFM exterior-power VIH3608/ (17.6) VEV1200 1,200 CFM exterior-power VIH3608/4208/5408/ (23.9) VEV1500 1,500 CFM exterior-power VIH4208/5408/ (21.3) DIV CFM interior-power VCIH3608/4208 & DCIH3604/ (12.2) DIV1200 1,200 CFM interior-power VCIH5408/6608 & DCIH (19.4) DEV CFM exterior-power VCIH3608/4208 & DCIH3604/ (17.6) DEV1200 1,200 CFM exterior-power VCIH3608/4208/5408/6608 & DCIH3604/4204/ (23.9) DEV1500 1,500 CFM exterior-power VCIH4208/5408/6608 & DCIH4204/ (21.3) VIL CFM in-line power VIH3608/ (9.1) VIL1200 1,200 CFM in-line power VIH3608/4208/5408/ (11.3) DIL CFM in-line power VCIH3608/4208 & DCIH3604/ (9.1) DIL1200 1,200 CFM in-line power VCIH3608/4208/5408/6608 & DCIH3604/4204/ (11.3) R E L E A S E D 1 0 / 2 / VRC INFORMATION SUBJECT TO CHANGE

34 Built-In Island/Classic Chimney Island Hood Installation Notes & Accessories Duct Covers 12 D. DCI for VIH models o Extend height of hood by 12 ; conceal duct VCCI for VCIH models o For 8, 9, or 10 ceilings DCCI for DCIH models o For 8, 9, or 10 ceilings Professional covers (DCI & VCCI) available in Stainless Steel (SS), Black (BK), White (WH), Metallic Silver (MS), Graphite Gray (GG), Sne Gray (SG), Taupe (TP), Biscuit (BT), Cotn White (CW), Oyster Gray (OG), Golden Mist (GM), Lemonade (LE), Sage (SA), Mint Julep (MJ), Sea Glass (SE), Iridescent Blue (IB), Viking Blue (VB), Pumpkin (PM), Racing Red (RR), Apple Red (AR), Burgundy (BU), Plum (PL), Chocolate (CH), and Cobalt Blue (CB). Designer covers (DCCI) available in Stainless Steel (SS), Black (BK), White (WH), Metallic Silver (MS), Graphite Gray (GG), Sne Gray (SG), Taupe (TP), Biscuit (BT), Cotn White (CW), Oyster Gray (OG), Golden Mist (GM), Lemonade (LE), Sage (SA), Mint Julep (MJ), Sea Glass (SE), Iridescent Blue (IB), Viking Blue (VB), Pumpkin (PM), Racing Red (RR), Apple Red (AR), Burgundy (BU), Plum (PL), Chocolate (CH), and Cobalt Blue (CB). When ordering, specify finish code following accessory model number (for example, DCI36-SS) Model Description Approx. ship wt. lbs. (kg) DCI36 Professional island hood 36 W. duct cover 15 (6.8) DCI42 Professional island hood 42 W. duct cover 18 (8.1) DCI54 Professional island hood 54 W. duct cover 24 (10.8) DCI66 Professional island hood 66 W. duct cover 34 (15.3) VCCI3608 Professional chimney island hood 36 W./12 H. duct cover (for 8 ceilings) 20 (9.0) VCCI3609 Professional chimney island hood 36 W./24 H. duct cover (for 9 ceilings) 35 (15.8) VCCI3610 Professional chimney island hood 36 W./36 H. duct cover (for 10 ceilings) 50 (22.5) VCCI4208 Professional chimney island hood 42 W./12 H. duct cover (for 8 ceilings) 24 (10.8) VCCI4209 Professional chimney island hood 42 W./24 H. duct cover (for 9 ceilings) 42 (18.9) VCCI4210 Professional chimney island hood 42 W./36 H. duct cover (for 10 ceilings) 60 (27.0) VCCI5408 Professional chimney island hood 54 W./12 H. duct cover (for 8 ceilings) 32 (14.4) VCCI5409 Professional chimney island hood 54 W./54 H. duct cover (for 9 ceilings) 56 (25.2) VCCI5410 Professional chimney island hood 54 W./36 H. duct cover (for 10 ceilings) 80 (36.0) VCCI6608 Professional chimney island hood 66 W./12 H. duct cover (for 8 ceilings) 42 (18.9) VCCI6609 Professional chimney island hood 66 W./24 H. duct cover (for 9 ceilings) 69 (13.1) VCCI6610 Professional chimney island hood 66 W./36 H. duct cover (for 10 ceilings) 90 (40.5) DCCI3608 Designer chimney island hood 36 W./16 H. duct cover (for 8 ceilings) 20 (9.0) DCCI3609 Designer chimney island hood 36 W./28 H. duct cover (for 9 ceilings) 35 (15.8) DCCI3610 Designer chimney island hood 36 W./40 H. duct cover (for 10 ceilings) 50 (22.5) DCCI4208 Designer chimney island hood 42 W./16 H. duct cover (for 8 ceilings) 24 (10.8) DCCI4209 Designer chimney island hood 42 W./28 H. duct cover (for 9 ceilings) 42 (18.9) DCCI4210 Designer chimney island hood 42 W./40 H. duct cover (for 10 ceilings) 60 (27.0) DCCI5408 Designer chimney island hood 54 W./16 H. duct cover (for 8 ceilings) 32 (14.4) DCCI5409 Designer chimney island hood 54 W./28 H. duct cover (for 9 ceilings) 56 (25.2) DCCI5410 Designer chimney island hood 54 W./40 H. duct cover (for 10 ceilings) 80 (36.0) Compliance Information WARRANTY SUMMARY* One-year full warranty complete product Five-year limited warranty all ventilar mors Ninety-day limited warranty cosmetic parts such as glass, painted, and decorative items *Must use Viking ventilar kits with Viking hoods; use of non-viking kits voids product warranty. For complete warranty see Use & Care Guide. Warranty valid on Viking products shipped within the United States and Canada. R E L E A S E D 1 0 / 2 / VRC INFORMATION SUBJECT TO CHANGE

35 Designer Built-In Wall Hoods Standard Features & Accessories All models include Must also purchase interior or exterior ventilar kit, sold separately (see Installation Notes & Accessories for recommended Viking ventilar products 24 D.(tests show 24 D. hoods perform properly over 27 D. ranges) Heat sensor turns the ventilar on full power when cooking temperatures reach uncomfortable levels Variable speed controls for cusm venting separate on/off switch allows you leave ventilar at favorite/most-used setting 12-hour timer built in ventilar controls Delay feature allows you set the ventilar shut off on its own from minutes later Heavy-duty construction; elegant design, and styling o Virtually seamless stainless steel design with no visible screws Easy cleanup o Dishwasher-safe, stainless steel mesh filters efficiently remove grease and heated vapors from the Model Options air, and are easily removed for quick cleaning (frame and mesh are stainless steel for durability and long life) See Dimensions & Specifications table for number of filters (and spacers) per model o Design of low-profile filter system means less interior hood space be cleaned o Canopy interior is completely lined in stainless steel for increased rigidity, seamless appearance, and easy cleaning 50-watt halogen lights with dimmer control o Power switch and dimmer control are separate, allowing you leave dimmer at favorite position o See Dimensions & Specifications table for number of lights per model DTWS models include 9"H. Adjustable duct cover (for 8 9 ceilings) shipped standard (see Dimensions & Specifications table) o Finish matches canopy exterior DTWN models include 18"H. Duct covers must be ordered separately (see Installation Notes & Accessories) Model numbers SLIM TRADITIONAL WALL HOODS DTWS "W. DTWS "W. DTWS "W. DTWS "W. TALL TRADITIONAL LEGDELESS WALL HOODS DTWN "W. DTWN "W. DTWN "W. DTWN "W. Slim Traditional Wall Hoods should not be installed over Professional cooking products with the gas Char-Grill feature. A 1,200 or 1,500 CFM (if applicable) ventilar kit should be used when installed over ranges/rangeps with gas grill. DTWS Slim Traditional Wall Hood* DTWN Tall Traditional Ledgeless Wall Hood** FINISH DETAILS Stainless Steel (SS), Black (BK), White (WH), Metallic Silver (MS), Graphite Gray (GG), Sne Gray (SG), Taupe (TP), Biscuit (BT), Cotn White (CW), Oyster Gray (OG), Golden Mist (GM), Lemonade (LE), Sage (SA), Mint Julep (MJ), Sea Glass (SE), Iridescent Blue (IB), Viking Blue (VB), Pumpkin (PM), Racing Red (RR), Apple Red (AR), Burgundy (BU), Plum (PL), Chocolate (CH), and Cobalt Blue (CB). Finish designates exterior of canopy Stainless Steel (SS) canopy interior EXTRA FINISH DETAILS FOR DTWS MODELS ONLY Accessory Rail along front of canopy (must be ordered and facry installed) Stainless Steel/Chrome (CR) Stainless steel rail with chrome supports/brackets and hooks (included) Brass Trim Option (BR) nameplate, rail, supports/brackets, and hooks (included). Brass components have a durable protective coating for maintenance-free normal use. *Shown throughout with adjustable duct cover, included. **Shown throughout with duct cover, sold separately. See Installation Notes & Accessories for duct cover model numbers and ship weights. ORDERING INSTRUCTIONS First specify model number, followed by color code (DTWS3049SS). Specify decorative rail code at end (DTWS3049SSCR). R E L E A S E D 1 0 / 2 / VRC INFORMATION SUBJECT TO CHANGE

36 Designer Built-In Wall Hoods Please see Installation Notes & Accessories for important information, including ventilar kits, duct covers, backsplashes, and warming shelf panels. Dimensions & Specifications PRODUCT DIMENSIONS DTWS Slim Traditional Wall Hood DTWN Tall Traditional Ledgeless Wall Hood 12 (30.5 cm) B 12 (30.5 cm) B 2 (5.1 cm) C 12 (30.5 cm) A 24 (61.0 cm) 9 (22.9 cm) A 24 (61.0 cm) 18 (45.7 cm) SLIM TRADITIONAL WALL HOOD TALL TRADITIONAL LEDGELESS WALL HOOD Model Hood Duct Cover Lights Filters Heat Approx. Width (A) Height Width (B) Depth Height (C) Lamps Ship. wt. DTWS /8 (75.9 cm) 9 (22.9 cm) 12 (30.5 cm) 12 (30.5 cm) 21 (53.3cm) 2 2 N/A 50 lbs. 33 (83.8 cm) (22.5 kg) DTWS /8 (91.1 cm) 9 (22.9 cm) 12 (30.5 cm) 12 (30.5 cm) 21 (53.3cm) 2 2 N/A 60 lbs. 33 (83.8 cm) (27.0 kg) DTWS /8 (106.4 cm) 9 (22.9 cm) 12 (30.5 cm) 12 (30.5 cm) 21 (53.3cm) 2 3 N/A 70 lbs. 33 (83.8 cm) (31.5 kg) DTWS /8 (121.6 cm) 9 (22.9 cm) 20 (50.8 cm) 12 (30.5 cm) 21 (53.3cm) 3 3 N/A 81 lbs. 33 (83.8 cm) (36.5 kg) DTWN /8 (75.9 cm) 18 (45.7 cm) 29-7/8 12 (30.5 cm) 12 (30.5 cm) 2 2 N/A 59 lbs. (75.9 cm) (26.6 kg) DTWN /8 (91.1 cm) 18 (45.7 cm) 35-7/8 12 (30.5 cm) 12 (30.5 cm) 2 2 N/A 69 lbs. (91.1 cm) (31.1 kg DTWN /8 (106.4 cm) 18 (45.7 cm) 41-7/8 12 (30.5 cm) 12 (30.5 cm) 2 3 N/A 79 lbs. (106.4 cm) (35.6 kg) DTWN /8 (121.6 cm) 18 (45.7 cm) 47-7/8 12 (30.5 cm) 12 (30.5 cm) 3 3 N/A 90 lbs. (121.6cm) (40.5 kg) R E L E A S E D 1 0 / 2 / VRC INFORMATION SUBJECT TO CHANGE

37 Designer Built-In Wall Hoods Dimensions & Specifications CLEARANCE DIMENSIONS 66 min. (167.6 cm) (182.9 cm) 72 max. 30 min. 36 max. (76.2 cm) (91.4 cm) 36 (91.4 cm) SLIM TRADITIONAL WALL HOOD 66 min. (167.6 cm) (182.9 cm) 72 max. 30 min. (76.2 cm) (91.4 cm) 36 max. 36 (91.4 cm) TALL TRADITIONAL LEDGELESS WALL HOOD R E L E A S E D 1 0 / 2 / VRC INFORMATION SUBJECT TO CHANGE

38 Designer Built-In Wall Hoods Installation Requirements DTWS Slim Traditional Wall Hood DTWN Tall Traditional Ledgeless Wall Hood Proper installation/ducting is extremely important ensure maximum performance. Use a qualified and trained installer. DUCTING Check with a qualified and trained installer or local codes for makeup air requirements, if any. Max. duct run length o For 300 1,200 CFM 50 (152.4 m) o For 1,500 CFM 75 (22.9 m) o For general reference only; for longer duct runs, increase duct size and contact a qualified and trained installer. UTILITY REQUIREMENTS o Straight runs and gradual turns are best; for example, each 90 elbow is equivalent 5 10 ( cm) of straight run. 7 (17.8 cm) round duct for CFM; 10 for CFM o Never use flexible duct; it creates back pressure/air turbulence and greatly reduces performance. GAS Not applicable ELECTRICAL Hardwire direct with two-wire ground 120 VAC/60 Hz Max. amp usage (rating includes recommended ventilar kit rating) see Dimensions & Specifications table PLUMBING Not applicable Note: All CFMs are based on tests with 0.1 static pressure. Without applying static pressure (some brands do not), CFM could be greatly overstated. Model Ventilar Kits Duct Size Max. Amps Interior Exterior Interior Exterior Interior Exterior DTWS3049 DIV300/440 DEV900/DIL900 7 (17.8 cm) 10 (25.4 cm) 1.7/ DTWS3649 DIV300/440 DEV900/1200/DIL900/ (17.8 cm) 10 (25.4 cm) 1.7/ DTWS4249 DIV440 DEV900/1200/DIL900/ (17.8 cm) 10 (25.4 cm) DTWS4849 DIV880 DEV1200/1500**/DIL (25.4 cm) 10 (25.4 cm) /5.1 DTWN3048 VIV300/600/1200* VEV900/1200*/DIL900/ (17.8 cm) 10 (25.4 cm) 2.4/4.6/ /3.9 DTWN3648 VIV300/600/1200* VEV900/1200*/DIL900/ (17.8 cm) 10 (25.4 cm) 2.4/4.6/ /3.9 DTWN4248 VIV600/1200* VEV900/1200*/DIL900/ (17.8 cm) 10 (25.4 cm) 4.6/ /3.9 DTWN4848 VIV1200* VEV1200/1500**/DIL (25.4 cm) 10 (25.4 cm) /5.1 * A 1,200 CFM interior- or exterior-power ventilar should be used when installed over range/rangep with gas char-grill. ** It is recommended that the 1,500 CFM ventilar be used with longer duct runs. Note: Maximum amp rating for hoods includes recommended ventilar kit rating. All products must be hard wired with two-wire ground. An interior- or exterior-power ventilar kit must be purchased for installation with all 18 H. hoods. R E L E A S E D 1 0 / 2 / VRC INFORMATION SUBJECT TO CHANGE

39 Designer Built-In Wall Hoods Installation Notes & Accessories Ventilar Kits See Installation Requirements table for recommendations for each hood model A 1,200 CFM interior or 1,500 CFM exterior (if applicable) ventilar should be used over ranges/rangeps with gas grill Must use Viking ventilar kits with Viking hoods; use of non-viking kits voids product warranty Kit model Description Hood models Approx. ship wt. lbs. (kg) DIV CFM interior power DTWS3049/ (6.8) DIV CFM interior power DTWS3049/3649/ (11.3) DIV CFM interior power DTWS (16.2) DEV CFM exterior power DTWS3049/3649/ (17.6) DEV1200 1,200 CFM exterior power DTWS3649/4249/ (23.9) DEV1500 1,500 CFM exterior power DTWS (21.3) VIV CFM interior power DTWN3048/ (12.2) VIV CFM interior power DTWN3048/3648/ (12.2) VIV1200 1,200 CFM interior power DTWN3048/3648/4248/ (19.4) VEV CFM exterior power DTWN3048/3648/ (17.6) VEV1200 1,200 CFM exterior power DTWN3048/3648/4248/ (23.9) VEV1500 1,500 CFM exterior power DTWN (21.3) DIL CFM in-line power DTWS3049/3649/ (9.1) DIL1200 1,200 CFM in-line power DTWS3649/4249/ (11.3) VIL CFM in-line power DTWN3048/3648/ (9.1) VIL1200 1,200 in-line power DTWN3048/3648/4248/ (11.3) Duct Covers DCW for DTWN models o 12 H./12 D. o Extend height of hood by 12 ; conceal duct Stainless Steel (SS), Black (BK), White (WH), Metallic Silver (MS), Graphite Gray (GG), Sne Gray (SG), Taupe (TP), Biscuit (BT), Cotn White (CW), Oyster Gray (OG), Golden Mist (GM), Lemonade (LE), Sage (SA), Mint Julep (MJ), Sea Glass (SE), Iridescent Blue (IB), Viking Blue (VB), Pumpkin (PM), Racing Red (RR), Apple Red (AR), Burgundy (BU), Plum (PL), Chocolate (CH), and Cobalt Blue (CB). o When ordering, specify finish code following accessory model number (for example, DCSB3008-SS) Model Description Approx. ship wt. lbs. (kg) DCW30 Duct cover for 30 W. DTWN 10 (4.5) DCW36 Duct cover for 36 W. DTWN 11 (5.0) DCW42 Duct cover for 42 W. DTWN 13 (5.9) DCW48 Duct cover for 48 W. DTWN 14 (6.3) Duct Cover Extensions For use with DTWS Slim Traditional Wall Hoods Extends height of hood by up 12 (for 10 ceilings) Replaces adjustable duct cover supplied with hood Stainless Steel (SS), Black (BK), White (WH), Metallic Silver (MS), Graphite Gray (GG), Sne Gray (SG), Taupe (TP), Biscuit (BT), Cotn White (CW), Oyster Gray (OG), Golden Mist (GM), Lemonade (LE), Sage (SA), Mint Julep (MJ), Sea Glass (SE), Iridescent Blue (IB), Viking Blue (VB), Pumpkin (PM), Racing Red (RR), Apple Red (AR), Burgundy (BU), Plum (PL), Chocolate (CH), and Cobalt Blue (CB). o When ordering, specify finish code following accessory model number (for example, DCCE1010-SS) Model Description Approx. ship wt. lbs. (kg) DCCE1010 Duct cover extension (for 30 W. DTWS hood) 4 (1.8) DCCE1210 Duct cover extension (for 36 & 42 W. DTWS hoods) 6 (2.7) DCCE2010 Duct cover extension (for 48 W. DTWS hood) 9 (4.1) R E L E A S E D 1 0 / 2 / VRC INFORMATION SUBJECT TO CHANGE

40 Designer Built-In Wall Hoods Installation Notes & Accessories Backsplashes Stainless Steel (SS) 30 H. Backsplashes protect the wall space below hood Create a continuous finish between cooking surface and hood Low maintenance, easy clean Hemmed edges with screw holes Kit includes backsplash and fastening screws Model Description Approx. ship wt. lbs. (kg) BKS30 30 W. backsplash 7 (3.2) BKS36 36 W. backsplash 9 (4.1) BKS42 42 W. backsplash 12 (5.4) BKS48 48 W. backsplash 14 (6.3) Warming Shelf Panels Stainless Steel (SS) 12 D./12 H. Shelf panels hold cookware and condiments Fold up/down, heavy-duty warming shelves (non-removable), facry installed on stainless steel backsplash 15-7/8 W. X 10-1/8 D. Kit includes shelf (or shelves) and fastening screws Model Description Approx. ship wt. lbs. (kg) WGP30 30 W. warming shelf panels (one shelf) 9 (4.1) WGP36 36 W. warming shelf panels (two shelves) 12 (5.4) WGP42 42 W. warming shelf panels (two shelves) 14 (6.3) WGP48 48 W. warming shelf panels (two shelves) 16 (7.2) Compliance Information WARRANTY SUMMARY* One-year full warranty complete product Five-year limited warranty all ventilar mors Ninety-day limited warranty cosmetic parts such as glass, painted, and decorative items *Must use Viking ventilar kits with Viking hoods; use of non-viking kits voids product warranty. For complete warranty see Use & Care Guide. Warranty valid on Viking products shipped within the United States and Canada. R E L E A S E D 1 0 / 2 / VRC INFORMATION SUBJECT TO CHANGE

41 Standard Features & Accessories VENTILATION Built-In Classic Chimney Glass Wall Hood All models include Recommended for use with 30 and 36 W. non-griddle/grill ranges, 30 and 36 W. non-griddle/grill rangeps, and 30 and 36 W. cookps Heavy-duty construction; sleek, contemporary design and styling o Virtually seamless stainless steel design with no visible screws Adjustable duct cover (for 8 9 ceilings) ships standard with hood Heat sensor turns the ventilar on full power when cooking temperatures reach uncomfortable levels Variable speed 450 CFM blower ships standard for cusm venting allows you leave ventilar at favorite/mostused setting May be converted for non-ducted recirculation (accessory kit sold separately) Advanced, electronic push-butn controls with LED display Delay feature allows you set the ventilar shut off on its own Easy cleanup o Dishwasher-safe, stainless steel mesh filters efficiently remove grease and heated vapors from the air, and are easily removed for quick cleaning (frame and mesh are stainless steel) See Dimensions & Specifications table for number of filters per model o Design of low-profile filter system means less interior hood space be cleaned Two 20-watt halogen lights with dimmer control. (bulbs included) Model Options DGWH Designer Chimney Glass Wall Hood FINISH DETAILS Stainless Steel (SS) ORDERING INSTRUCTIONS First specify model number, followed by color code (DGWH3042SS). R E V I S E D 1 / 1 5 / VRC INFORMATION SUBJECT TO CHANGE

42 Built-In Classic Chimney Glass Wall Hood Please see Installation Notes & Accessories for important information, including ventilar kits, duct covers, backsplashes, and warming shelf panels. Dimensions & Specifications PRODUCT DIMENSIONS DGWH Designer Chimney Glass Wall Hood 12 (30.5 cm) 11-1/2 (29.2 cm) 27-1/2 (69.9 cm) (121.9 cm) /16 (106.4 cm) 3-5/16 (8.4 cm) 20 (50.8 cm) CHIMNEY WALL HOOD Model Hood Duct Cover Lights Filters Heat Approx. Width Height Width Depth Height Lamps Ship. wt. DGWH /16 3-5/ /2 12 (30.5 cm) 27-1/2 (69.9 cm) 2 2 N/A 67 lbs. (90.0 cm) (8.4 cm) (29.2 cm) 48 (121.9 cm) (30.4 kg) R E V I S E D 1 / 1 5 / VRC INFORMATION SUBJECT TO CHANGE

43 Built-In Classic Chimney Glass Wall Hood Dimensions & Specifications CLEARANCE DIMENSIONS DGWH Designer Chimney Glass Wall Hood 60 min. (152.4 cm) 66 max. (167.6 cm) 24 min. (61.0 cm) 30 max. (76.2 cm) 36 (91.4 cm) CHIMNEY WALL HOOD Note: For best performance and safe, efficient operation, it is recommended that the botm of the hood be 24 (61.0 cm) 30 (76.2 cm) above the counterp. R E V I S E D 1 / 1 5 / VRC INFORMATION SUBJECT TO CHANGE

44 Built-In Classic Chimney Glass Wall Hood Installation Requirements DGWH Designer Chimney Glass Wall Hood UTILITY REQUIREMENTS Proper installation/ducting is extremely important ensure maximum performance. Use a qualified and trained installer. DUCTING 450 CFM interior (blower included) Check with a qualified and trained installer for local codes and makeup air requirements, if any. Max. duct run length 50 (152.4 m) o Duct run length is for general reference only; for longer duct runs, increase duct size and contact a qualified and trained installer. o Straight runs and gradual turns are best; for example, each 90 elbow is equivalent 5 10 ( cm) of straight run. 6 round duct o Never use flexible duct; it creates back pressure/air turbulence and greatly reduces performance. GAS Not applicable ELECTRICAL Hardwire direct with two-wire with ground 120 VAC/60 Hz Max. amp usage 3.13 PLUMBING Not applicable Note: All CFMs are based on tests with 0.1 static pressure. Without applying static pressure (some brands do not), CFM could be greatly overstated. Model Interior Ventilar Kits Interior Duct Size Interior Max. Amps DGWH CFM Standard 6 (15.2 cm) 3.13 R E V I S E D 1 / 1 5 / VRC INFORMATION SUBJECT TO CHANGE

45 Built-In Classic Chimney Glass Wall Hood Installation Notes & Accessories Recirculating Hood Conversion Kits For DGWH only Eliminates ducting Kit includes o Charcoal filter o Installation hardware o Top vent/grille Air diverter Reducing collar Model Description Approx. ship wt. lbs. (kg) DGRK36 36 W. glass hood 3 (1.1) Duct Cover Extensions For DGWH only 11-1/2 W. x 12 D. x H. Extends height of hood by up 12 (for 10 ceilings) Replaces adjustable duct cover supplied with hood Specify finish code following accessory model number (for example, DGCE1210-SS) Available in Stainless Steel (SS) Model Description Approx. ship wt. lbs. (kg) DGCE1210 Designer glass duct cover extension 12 (5.4) Compliance Information WARRANTY SUMMARY* One-year full warranty complete product Five-year limited warranty all ventilar mors Ninety-day limited warranty cosmetic parts such as glass, painted, and decorative items *Must use Viking ventilar kits with Viking hoods; use of non-viking kits voids product warranty. For complete warranty see Use & Care Guide. Warranty valid on Viking products shipped within the United States and Canada. R E V I S E D 1 / 1 5 / VRC INFORMATION SUBJECT TO CHANGE

46

47 Built-In Cusm Ventilar Systems Standard Features & Accessories All models include Must purchase and install an interioror exterior-power ventilar (mor) kit (see Installation Requirements table for recommendations) For use with cusm hoods o The look and performance of Viking ventilation in a blank canvas for virtually endless overlay options o Easily installs in almost any cusm hood application Powerful enough handle even the most pungent cooking odors Heat sensor on hood turns ventilar on full power when cooking temperatures reach uncomfortable levels Variable speed controls for cusm venting separate on/off switch allows you leave ventilar at favorite/most-used setting Quiet fans also keep temperatures down Heavy-duty construction o Virtually seamless stainless steel design with no visible screws Easy cleanup o Design of low-profile filter system means less interior hood space be cleaned o Stainless steel liner for increased rigidity, seamless appearance, and easy cleaning 50-watt halogen lights with dimmer control (bulbs included) o Power switch and dimmer control are separate, allowing you leave dimmer at favorite position o See Dimensions & Specifications table for number of lights per model Professional models include Professional-type size, design, and styling Heat lamps standard on wall ventilar systems (bulbs not included) Commercial-type baffle filter system efficiently removes grease and heated vapors from the air; especially designed for use with commercialtype products o See Dimensions & Specifications table for number of filters per model Removable trough catches liquefied grease, making cleanup quick and easy Designer models include Elegant design and styling 12-hour timer built in ventilar controls Delay feature allows you set the ventilar shut off on its own from minutes later Dishwasher-safe, stainless steel mesh filters efficiently remove grease and heated vapors from the air, and are easily removed for quick cleaning o See Dimensions & Specifications table for number of filters per model Model numbers PROFESSIONAL CUSTOM WALL VENTILATOR SYSTEMS (for use with cusm wall hoods) VBCV "W./18"H./22"D. VBCV "W./18"H./22"D. VBCV "W./18"H./22"D. VBCV "W./18"H./22"D. VBCV "W./18"H./22"D. VBCV "W./18"H./22"D. VBCV "W./18"H./22"D. PROFESSIONAL CUSTOM ISLAND VENTILATOR SYSTEMS (for use with cusm island hoods) VICV "W./18"H./29"D. VICV "W./18"H./29"D. VICV "W./18"H./29"D. VICV "W./18"H./29"D. DESIGNER CUSTOM WALL VENTILATOR SYSTEMS (for use with cusm wall hoods) DBCV "W./12"H./18"D. DBCV "W./12"H./18"D. DBCV "W./12"H./18"D. DBCV "W./12"H./18"D. DESIGNER CUSTOM ISLAND VENTILATOR SYSTEMS (for use with cusm island hoods) DICV "W./12"H./23"D. DICV "W./12"H./23"D. DICV "W./12"H./23"D. Model Options VBCV Professional Cusm Wall Ventilar System VICV Professional Cusm Island Ventilar System DBCV Designer Cusm Wall Ventilar System DICV Designer Cusm Island Ventilar System FINISH DETAILS Designed be covered by cusm materials no standard exterior finish Stainless steel interior See Cusm Panels section for more information and additional specifications. R E L E A S E D 8 / 1 8 / VRC INFORMATION SUBJECT TO CHANGE

48 Built-In Cusm Ventilar Systems Please see Installation Notes & Accessories for important information, including ventilar kits. Dimensions & Specifications PRODUCT DIMENSIONS VBCV Professional Cusm Wall Ventilar System VICV Professional Cusm Island Ventilar System DBCV Designer Cusm Wall Ventilar System DICV Designer Cusm Island Ventilar System 1 (2.5 cm) 1 (2.5 cm) 6 (15.2 cm) 5 (12.7 cm) 17-1/4 (43.8 cm) 11-3/4 (29.8 cm) VBCV A 21-1/8 (53.7 cm) 21-7/8 (55.8 cm) DBCV A 16 (40.6 cm) 17-1/4 (43.8 cm) 1 (2.5 cm) 1 (2.5 cm) 6 (15.2 cm) 5 (12.7 cm) 17-1/4 (43.8 cm) 11-3/4 (29.8 cm) VICV A 27-7/16 (69.7 cm) 28-7/16 (72.2 cm) DICV A 21 (53.3 cm) 22-1/4 (56.5 cm) Model Hood Lights Filters Heat Approx. Width (A) Depth Height Lamps Ship. wt. VBCV /4 (71.8 cm) 21-7/8 (55.8 cm) 17-1/4 (43.8 cm) lbs. (27.0 kg) VBCV /4 (87.0 cm) 21-7/8 (55.8 cm) 17-1/4 (43.8 cm) lbs. (30.6 kg) VBCV /4 (102.2 cm) 21-7/8 (55.8 cm) 17-1/4 (43.8 cm) lbs. (34.2 kg) VBCV /4 (117.5 cm) 21-7/8 (55.8 cm) 17-1/4 (43.8 cm) lbs. (39.6 kg) VBCV /4 (132.7 cm) 21-7/8 (55.8 cm) 17-1/4 (43.8 cm) lbs. (43.2 kg) VBCV /4 (148.0 cm) 21-7/8 (55.8 cm) 17-1/4 (43.8 cm) lbs. (48.6 kg) VBCV /4 (163.2 cm) 21-7/8 (55.8 cm) 17-1/4 (43.8 cm) lbs. (54.5 kg) VICV /4 (87.0 cm) 28-7/16 (72.2 cm) 17-1/4 (43.8 cm) 4 4 N/A 73 lbs. (33.1 kg) VICV /4 (102.2 cm) 28-7/16 (72.2 cm) 17-1/4 (43.8 cm) 4 4 N/A 83 lbs. (37.7 kg) VICV /4 (132.7 cm) 28-7/16 (72.2 cm) 17-1/4 (43.8 cm) 6 6 N/A 115 lbs. (52.2 kg) VICV /4 (163.2 cm) 28-7/16 (72.2 cm) 17-1/4 (43.8 cm) 8 8 N/A 128 lbs. (58.1 kg) DBCV /8 (75.2 cm) 17-1/4 (43.8 cm) 11-3/4 (29.8 cm) 2 2 N/A 63 lbs. (28.4 kg) DBCV /8 (90.5 cm) 17-1/4 (43.8 cm) 11-3/4 (29.8 cm) 2 2 N/A 70 lbs. (31.5 kg) DBCV /8 (105.7 cm) 17-1/4 (43.8 cm) 11-3/4 (29.8 cm) 2 3 N/A 77 lbs. (34.7 kg) DBCV /8 (121.0 cm) 17-1/4 (43.8 cm) 11-3/4 (29.8 cm) 2 3 N/A 85 lbs. (38.3 kg) DICV /8 (90.5 cm) 22-1/4 (40.6 cm) 11-3/4 (29.8 cm) 4 2 N/A 88 lbs. (40.0 kg) DICV /8 (105.7 cm) 22-1/4 (40.6 cm) 11-3/4 (29.8 cm) 4 2 N/A 96 lbs. (43.6 kg) DICV /8 (136.2 cm) 22-1/4 (40.6 cm) 11-3/4 (29.8 cm) 4 3 N/A 106 lbs. (48.1 kg) R E L E A S E D 8 / 1 8 / VRC INFORMATION SUBJECT TO CHANGE

49 Built-In Cusm Ventilar Systems Installation Requirements VBCV Professional Cusm Wall Ventilar System VICV Professional Cusm Island Ventilar System DBCV Designer Cusm Wall Ventilar System DICV Designer Cusm Island Ventilar System Proper installation/ducting is extremely important ensure maximum performance. Use a qualified and trained installer. DUCTING Check with a qualified and trained installer or local codes for makeup air requirements, if any. Max. duct run length o For 300 1,200 CFM 50 (152.4 m) o For 1,500 CFM 75 (22.9 m) o Duct run length is for general reference only; always use a qualified and trained installer. o Straight runs and gradual turns are best; for example, each 90 elbow is equivalent 5 10 ( cm) of straight run. 7 (17.8 cm) round duct for CFM; 10 for CFM o Never use flexible duct; it creates back pressure/air turbulence and greatly reduces performance. GAS Not applicable ELECTRICAL Hardwire direct with two-wire ground 120 VAC/60 Hz Max. amp usage (rating includes recommended ventilar kit rating) see Installation Requirements table PLUMBING Not applicable Note: Exhaust capacity based on tests with 0.1 static pressure. Without applying static pressure (some brands do not), CFM could be greatly overstated. Model Ventilar Kits Interior Exterior VBCV3038 VIV300/600/1200* VEV900/1200* VIL900/1200* VBCV3638 VIV300/600/1200* VEV900/1200* VIL900/1200* VBCV4238 VIV600/1200* VEV900/1200* VIL900/1200* UTILITY REQUIREMENTS Duct Size Interior Exterior/In-Line 7 (17.8 cm)/ 10 (25.4 cm) 7 (17.8 cm)/ VIL900/1200* 7 (17.8 cm)/ VIL900/1200* Max. Amps Interior Exterior 10 (25.4 cm) 5.0/6.2/ /6.1/3.0/ (25.4 cm) 5.0/6.2/ /6.1/3.0/ (25.4 cm) 6.2/ /6.1/3.0/4.8 VBCV4838 VIV1200* VEV1200*/1500/VIL1200* 10 (25.4 cm) 10 (25.4 cm) /9.1/4.8 VBCV5438 VIV1200* VEV1200*/1500/VIL1200* 10 (25.4 cm) 10 (25.4 cm) /9.1/4.8 VBCV6038 VIV1200* VEV1200*/1500/VIL1200* 10 (25.4 cm) 10 (25.4 cm) /9.5/4.8 VBCV6638 VIV1200* VEV1200*/1500/VIL1200* 10 (25.4 cm) 10 (25.4 cm) /9.5/4.8 VICV3698 VIV600/VIV1200* VEV900/1200*/VIL900/VIL1200* 7 (17.8 cm) 10 (25.4 cm) 4.9/ /4.7/3.0/4.8 VICV4298 VIV600/1200* VEV900/1200*/1500/ VIL900/VIL1200* 7 (17.8 cm) 10 (25.4 cm) /4.8/5.4/3.0/4.8 VICV5498 VIV1200* VEV1200*/1500/VIL (25.4 cm) 10 (25.4 cm) /6.2/4.8 VICV6698 VIV1200* VEV1200*/1500/VIL (25.4 cm) 10 (25.4 cm) /7.1/4.8 DBCV3082 DIV300/440 DEV900**/1200*/DIL900/DIL (17.8 cm) 10 (25.4 cm) 1.7/ /3.9/3.0/4.8 DBCV3682 DIV300/440 DEV900**/1200*/DIL900/DIL (17.8 cm) 10 (25.4 cm) 1.7/ /3.9/3.0/4.8 DBCV4282 DIV440 DEV900**/1200*/DIL900/DIL (17.8 cm) 10 (25.4 cm) /3.9/3.0/4.8 DBCV4882 DIV880 DEV1200/1500/DIL1200* 10 (25.4 cm) 10 (25.4 cm) /5.1/4.8 DICV3632 DIV440 DEV900**/1200* DIL900/DIL1200 DICV4232 DIV440 DEV900**/1200/1500 DIL900/DIL (17.8 cm) 10 (25.4 cm) /5.2/3.0/4.8 7 (17.8 cm) 10 (25.4 cm) /5.2/6.0/3.0/4.8 DICV5432 DIV880 DEV1200/1500/DIL (25.4 cm) 10 (25.4 cm) /6.0/4.8 *1200 CFM interior and exterior (if applicable) ventilar should be used with all outdoor approved models and when indoor models are installed over ranges/rangeps with gas grill. **Must use 8 duct from canopy ceiling transition 10 duct past duct cover. R E L E A S E D 8 / 1 8 / VRC INFORMATION SUBJECT TO CHANGE

50 Built-In Cusm Ventilar Systems Installation Notes & Accessories Ventilar Kits See Installation Requirements table for recommendations for each hood model One ventilar, one duct run for any size hood/ventilar A 1,200 CFM interior or 1,500 CFM exterior (if applicable) ventilar should be used over ranges/rangeps with gas grill Must use Viking ventilar kits with Viking hoods; use of non-viking kits voids product warranty Kit model Description Hood models Approx. ship wt. lbs. (kg) VIV CFM interior-power VBCV3038/ (12.2) VIV CFM interior-power VBCV3038/3638/4238 & VCIV3698/ (12.2) VIV CFM interior-power VBCV3038/3638/4238/4838/5438/6038/6638 & 43 (19.4) VCIV3698/5498/6698 VEV CFM exterior-power VBCV3038/3638/4238 & VICV3698/ (17.6) VEV CFM exterior-power VBCV4838/5438/6038/6638 & VICV3698/4298/ 53 (23.9) 5498/6698 VEV CFM exterior-power VBCV4838/5438/6038/6638 &VICV4298/5498/ (21.3) DIV CFM interior-power DBCV3082/ (6.8) DIV CFM interior-power DBCV3082/3682/4282 & DICV3632/ (11.3) DIV CFM interior-power DBCV4882 & DICV (16.2) DEV CFM exterior-power DBCV3082/3682/4282 & DICV3632/ (17.6) DEV CFM exterior-power DBCV3082/3682/4282/4882 & DICV3632/4232/ (23.9) DEV CFM exterior-power DBCV4882 & DICV4232/ (23.9) VIL CFM in-line power VBCV3038/3638/4238 & VICV3698/ (9.1) VIL CFM in-line power VBCV3038-VBCV6638 & VICV3698-VICV (11.3) DIL CFM in-line power DBCV3082-DBCV4282 & DICV3632/ (9.1) DIL CFM in-line power DBCV3082-DBCV4882 & DICV3632-DICV (11.3) Compliance Information WARRANTY SUMMARY* One-year full warranty complete product Five-year limited warranty all ventilar mors Ninety-day limited warranty cosmetic parts such as glass, painted, and decorative items *Must use Viking ventilar kits with Viking hoods; use of non-viking kits voids product warranty. For complete warranty see Use & Care Guide. Warranty valid on Viking products shipped within the United States and Canada. R E L E A S E D 8 / 1 8 / VRC INFORMATION SUBJECT TO CHANGE

51 Built-In VersaVent Rear Downdraft Standard Features & Accessories All models include Downdraft blower systems are designed exhaust airborne contaminants when cooking with gas or electric cookps. They can be mounted in island, peninsula, or conventional wall locations. Hidden operation mechanically raises and lowers from counterp with the uch of a butn When not in use, unite retracts and rests flush with the cooking surface Suitable for both island and wall installations Choose from interior- or exteriorpower ventilars (see Installation Notes & Accessories) Filter alert (flashing light) reminds you clean filters after approx. 30 hours of use Four variable fan speeds ensure efficient ventilation Delay/off feature allows operation for 10 minutes before aumatically shutting off Two removable, easy--clean mesh filters are dishwasher-safe and sized VIPR models include For use with Viking Professional cookps Controls on intake p VIPR(R) models include For use with Viking Professional cookps & rangeps* (non-grill, nonwok**) Island rangep must be installed with island trim Remote-mounted control installs on the counterp prevents you from having reach over cooking surface or vessels DIPR models include For use with Viking Designer cookps & rangeps (non-grill, non-wok**) Island rangep must be installed with island trim Remote-mounted control installs on the counterp prevents you from having reach over cooking surface or vessels Model numbers PROFESSIONAL DOWNDRAFT VIPR W. (fits in most 30 W. cabinets*) VIPR W. (fits in most 36 W. cabinets*) VIPR W. (fits in most 48 W. cabinets*) PROFESSIONAL DOWNDRAFT W/REMOTE VIPR101R 30 W. (fits in most 30 W. cabinets*) VIPR161R 36 W. (fits in most 36 W. cabinets*) VIPR181R 48 W. (fits in most 48 W. cabinets*) DESIGNER DOWNDRAFT W/REMOTE DIPR100R 30 W. (fits in most 30 W. cabinets*) DIPR160R 36 W. (fits in most 36 W. cabinets*) DIPR150R 45 W. (fits in most 45 W. cabinets*) *Remote model must be used when installed with VGRT rangeps. **If installed behind a gas char-grill or wok, the warranty will be voided and performance may be below expectations. When selecting the power and high performance of a Viking gas char-grill or wok, a Viking 18 H. overhead hood is highly recommended. Model Options VIPR Professional Downdraft FINISH DETAILS FOR ALL MODELS Stainless Steel (SS) VIPR Professional Downdraft w/remote FINISH DETAILS FOR REMOTE MODELS Stainless Steel (SS) Black control panel and membrane with stainless steel trim o 4 W. x 2-1/2 D. DIPR Designer Downdraft w/remote R E V I S E D 8 / 1 1 / VRC INFORMATION SUBJECT TO CHANGE

52 Built-In VersaVent Rear Downdraft Please see Installation Notes & Accessories for important information, including blower kits and remote mounted controls. Dimensions & Specifications PRODUCT DIMENSIONS VIPR Professional Downdraft VIPR Professional Downdraft w/remote DIPR Designer Downdraft w/remote 2 (5.1 cm) A 2 (5.1 cm) A PROFESSIONAL 8-11/16 (22.1 cm) DESIGNER 8-1/16 (20.5 cm) VIPR101/101R VIPR161/161R VIPR181/181R DIPR100R DIPR160R DIPR150R Overall width (A) 30 (76.2 cm) 36 (91.4 cm) 48 (121.9 cm) 30 (76.2 cm) 36 (91.4 cm) 45 (114.3 cm) Overall depth Overall height 2 (5.1 cm) 29-5/16 (74.5 cm) From counterp 8-11/16 (22.1 cm) 8-11/16 (22.1 cm) 8-11/16 (22.1 cm) 8-1/16 (20.5 cm) 8-1/16 (20.5 cm) 8-1/16 (20.5 cm) Approx. ship. wt. 43 lbs. (19.4 kg) 50 lbs. (22.5 kg) 66 lbs. (29.7 cm) 43 lbs. (19.4 kg) 50 lbs. (22.5 kg) 66 lbs. (29.7 cm) R E V I S E D 8 / 1 1 / VRC INFORMATION SUBJECT TO CHANGE

53 FILTER RESET FILTER UP DOWN VENTILATION Built-In VersaVent Rear Downdraft Dimensions & Specifications CLEARANCE DIMENSIONS 1 3/4 (4.4 cm) 2 (5.1 cm) Counterp Cookp Downdraft Front back inside cabinet depth 1/32 (0.08 cm) 1/16 (0.16 cm) 1/32 (0.08 cm) 1/16 (0.16 cm) 4 (10.2 cm) PROFESSIONAL PROFESSIONAL & DESIGNER W/REMOTE Note: Accurate alignment of cookp and downdraft is necessary ensure that there is no interference when air vent is raised and lowered. There should be a gap of 1/32 1/16 (.08 cm 0.16 cm) between the back of the cookp and the front of the downdraft cover. Rangeps and Designer cookps must be used with an R model downdraft (with remote control) - mounted in the counterp, at least 4 (10.2 cm) from the burners. Counterps with a raised lip and/or backsplash may not allow enough flat space. Installation requires 2 of flat counterp behind the cooking surface, and 1-3/4 between the back edge of the cooking surface and the inside back of cabinet. (Viking recommends that oversized cabinets be used for easier installation. Also, cookp depth can vary greatly, causing the fit of cookp/rangep and downdraft be tight.) The remote mounted control (if applicable) must be placed in the counterp. Do not install it directly behind or beside a burner or element. Distance between the controls and the edge of the cooking surface should be 4 min. Important If installing in a cabinet with same width as your downdraft model, the outlet cannot be located on the back wall of cabinet. In these cases, the downdraft will cover the entire back wall of the cabinet, so you must you must either mount the electrical box a side wall or cabinet floor at least 12 from the back wall, or mount the electrical box a wall stud behind the cabinet, where it will not be covered by the downdraft, and provide a clearance hole in the back wall of the cabinet. For ducting clearance, check location of floor joists, wall studs, electrical wiring or plumbing for possible interference. R E V I S E D 8 / 1 1 / VRC INFORMATION SUBJECT TO CHANGE

54 Built-In VersaVent Rear Downdraft Installation Requirements VIPR Professional Downdraft VIPR Professional Downdraft w/remote DIPR Designer Downdraft w/remote UTILITY REQUIREMENTS DUCTING Check with a qualified and trained installer or local codes for makeup air requirements, if any. Max. duct run length (see Installation Notes & Accessories) For best performance, use the shortest length of ductwork and a minimum number of elbows. The system will operate most efficiently when the ductwork does not exceed 40 of equivalent duct. For longer duct runs, increase duct size and contact a qualified and trained installer. Straight runs and gradual turns are best; for example, each 90 elbow is equivalent 5 10 ( cm) of straight run. o 6 or 10 round elbow= 6 of straight duct o 3-1/4 x 10 6 round transition= 2 of straight duct o 3-1/4 x elbow= 8 of straight duct Never use flexible duct; it creates back pressure/air turbulence and greatly reduces performance. GAS Not applicable ELECTRICAL 2 -long power cord with 3- pronged plug included Internal blowers require a grounded outlet within reach of the power cord External blowers require direct hardwiring with 2-wire with ground, using locally-supplied wire, and connected the downdraft plug (included) 120 VAC/60 Hz Max. amp usage (rating does not include recommended ventilar kit rating See Installation Notes & Accessories) PLUMBING Not applicable Model Ventilar Kits Duct Size Max. Amps Interior Exterior Interior Exterior Interior Exterior VIPR101 VIDV500 VEDV /4 x 10 (8.3 x 25.4 cm) 10 (25.4 cm) VIPR161 VIDV500 VEDV /4 x 10 (8.3 x 25.4 cm) 10 (25.4 cm) VIPR181 VIDV500 VEDV900/ /4 x 10 (8.3 x 25.4 cm) 10 (25.4 cm) /3.0 VIPR101R VIDV500 VEDV /4 x 10 (8.3 x 25.4 cm) 10 (25.4 cm) VIPR161R VIDV500 VEDV /4 x 10 (8.3 x 25.4 cm) 10 (25.4 cm) VIPR181R VIDV500 VEDV900/ /4 x 10 (8.3 x 25.4 cm) 10 (25.4 cm) /3.0 DIPR100R VIDV500 VEDV /4 x 10 (8.3 x 25.4 cm) 10 (25.4 cm) DIPR160R VIDV500 VEDV /4 x 10 (8.3 x 25.4 cm) 10 (25.4 cm) DIPR150R VIDV500 VEDV /4 x 10 (8.3 x 25.4 cm) 10 (25.4 cm) Note: Proper installation/ ducting is extremely important ensure maximum performance. Use a qualified and trained installer. R E V I S E D 8 / 1 1 / VRC INFORMATION SUBJECT TO CHANGE