Manufactured by Upwey Valve & Engineering Pty Ltd MAXI-CHECK L. Low Wear Ball Check Valve (MCL)
|
|
|
- Scot Collins
- 5 years ago
- Views:
Transcription
1 MAXI-CHECK L Low Wear Ball Check Valve (MCL)
2 General description MCL ANSI 300 QUEENSLAND AUSTRALIA Upwey Valve & Engineering s SLURRYTUFF range includes the MAXI-Check L - Soft Seated Ball Check Valves. (For Low Abrasion Applications) The weight of the ball, compared to the flap of an equivalent swing check valve plus the flow around the ball, means that there is considerably lower pressure loss through the valve. Such savings in pressure drop are reflected in measurable annual power savings, particularly in 24 x 7 pipeline pumping scenarios. The large port design prevents clogging while the urethane coated ball is free to move and rotate with the media as it flows through the valve. This continuous movement prevents scale build up on the ball and within the ball bonnet, which can be inspected through the bonnet blanking flange. The seat is integral to the one piece body. The valves are fabricated which allows flexibility of manufacturing to suit clients requirements. Standard face to face measurements are according to AS paragraph FIG. 3.1 or DIN 3202-F6. The MCL is a direct replacement for Swing-Check valves. MCL ANSI sales@upwey.com
3 Features Simple construction allows for ease of maintenance Flanged either Table D or E, PN10, PN16 (EN or AS) or ANSI 150/300 Ball has an aluminium core and is Urethane coated Available lined or unlined with hot vulcanized natural rubber (other linings available on request - EPDM) Finish is abrasive clean to 2.5 and painted with 2 Part Interzone 954 epoxy paint Continues work pressure Bar Coating suitable for highly aggressive environments Drain/Flush point in body Suitable for horizontal and vertical operation Very low water hammer characteristics Low friction loss Body available in Carbon, Stainless/Duplex Stainless Steel Manufactured in Australia! The ball is free to move and rotate on the media as it flows through the valve - hence no scale build up Ball Placement 02
4 Dimensions & Weight! MCL ANSI 300 The large port design prevents clogging AS TD, E ANSI150 PN16 Bore A B C Weight(KG) sales@upwey.com
5 Back flow prevention in mine de-watering Chemical Power generation ash water return Pulp and Paper Mineral process plant water Sewage piping systems Waterlines Environmental and effluent Standard ASME B16.34 ASME B16.5 ASME B31.3 Applications Data Sheet Purpose: Non return ball check Applications: Chemical, sewerage, pulp, food and dewatering Type: Soft seated ball check valve-low pressure up to 30 Bar Size available: DN80 DN600 Figure: MCL80 to MCL600 Rating: Max work pressure: 30 Bar Connection: Flanged either Table D, E, PN10, PN16 (EN or AS) or ANSI150/300 Body: Fabricated carbon steel Ball: Metal core urethane coated Seat: Carbon steel seat is integral to the body Gasket: 90 shore O ring used between flanges for seal Fasteners: Class 8.8 galvanised carbon steel. Stainless options as required Lining: Hot vulcanised natural rubber standard Finish: Abrasive clean to 2.5 and painted with Interzone 954, a 2 part epoxy suited to harsh environment Testing: AS and EN PT 1&2 or API598 as specified Standard: ASME B16.34 ASME B16.5 ASME B31.3 Manufacturer: Upwey Valve & Engineering Pty Ltd 04
6 STREET ADDRESS Upwey Valve & Engineering Pty Ltd Factory 2, 178 Colchester Road Bayswater North Victoria 3153 Australia POSTAL ADDRESS Upwey Valve & Engineering Pty Ltd PO Box 98 Kilsyth Victoria 3137 Australia P F E sales@upwey.com ABN: Your local representative: SLURRYTUFF is proudly manufactured by Upwey Valve & Engineering Pty Ltd. All dimensions given in this brochure are subject to change without notice. Rights for design improvements reserved.
Manufactured by Upwey Valve & Engineering Pty Ltd EZI-VAC. Air Release/vacuum Break Valve (EV/EVTA)
EZI-VAC Air Release/vacuum Break Valve (EV/EVTA) General description Upwey Valve & Engineering s SLURRYTUFF range includes the EZI-VAC Air Release and Vacuum Break Valve. Our EZI-VAC KINETIC Single and
Product Catalogue Heavy Duty Valves
Product Catalogue Heavy Duty Valves About the Company Founded in January 2010, Bray has, in a remarkably short period of time, established an enviable, global reputation in the mining, power generation
Swing Check Valves - Series 41
Tender Text Data Sheets Swing Check Valves - Series 41 The swing check valves are typically installed after a pump unit in order to prevent the water from flowing back through the pump, when it stops.
Manual Valves. The solution you ve been looking for
Manual Valves Larox manual valves Larox manual valves are ideal for shut off applications that involve abrasive or corrosive slurries, powders or granular substances. Our advanced flow control solutions
BUTTERFLY VALVE 17 SERIES Gearbox
DN H1 H2 H3 BUTTERFLY VALVE 17 SERIES Gearbox FIGURE: 17234ER: 17234BR: 17234VR: Seat in EPDM, with gearbox Seat in Buna, with gearbox Seat in Viton, with gearbox B ØR L DIMENSIONS: (mm) DN L B XR H1 H2
WAFER STYLE KNIFE GATE VALVE
MODEL WAFER STYLE KNIFE GATE VALVE The model knife gate is an uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging shut
MANUAL VALVES. The solution you ve been looking for THE SOLUTION YOU VE BEEN LOOKING FOR
al es MANUAL VALVES The solution you ve been looking for LAROX MANUAL VALVES Larox manual valves are ideal for shut off applications that involve abrasive or corrosive slurries, powders or granular substances.
L15 HEAVY DUTY KNIFE GATE VALVE STANDARD PARTS LIST
L15 HEAVY DUTY KNIFE GATE VALVE The L15 model knife gate is a uni-directional lug type valve designed according to MSS-SP-81 and TAPPI TIS 405-8 for industrial service applications. The design of the body
WAFER STYLE KNIFE GATE VALVE
WAFER STYLE KNIFE GATE VALVE The model knife gate is an uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging shut off on
RUBBER SLEEVE KNIFE GATE VALVE
RUBBER SLEEVE KNIFE GATE VALVE The model knife gate is a wafer valve designed for a wide range of industrial applications. The double-seated design provides bi-directional shut off. The design of the valve
Technical changes kept in reserve THROUGH CONDUIT KNIFE GATE VALVE
Technical changes kept in reserve THROUGH CONDUIT KNIFE GATE VALVE The B model knife gate is a bi-directional wafer valve designed for media with high consistency. The double seat design assures a non-clogging
Rubber-steel gaskets. Gasket profiles WG2 WG2P WL-HT KNG. Rubber-steel gaskets
Rubber-steel gaskets have amassed a wide range of applications in sealing technology. Wherever the secure sealing of media with an exceptionally low leak rate, as well as low bolt loads at relatively low
SINGLE-ECCENTRIC BUTTERFLY VALVES TYPE L32.6
Application Single-eccentric butterfly valves are industrial valves, which are designed to fully open or close a passage of the working medium flowing through a pipeline. They can also be used for flow-control
AWWA C517 ECCENTRIC PLUG VALVES
COMPANY CERTIFICATE AWWA C517 ECCENTRIC PLUG VALVES TIANJIN FSK FLOW CONTROL EQUIPMENT CO., LTD VERSION: 2013-05-EPV CONTENTS ABOUT FSK 1 Our Certifications.....2 Rectangular Port Eccentric Plug Valves.3
SINGLE-ECCENTRIC BUTTERFLY VALVES TYPE L32.6
Application Single-eccentric butterfly valves are industrial valves, which are designed to fully open or close a passage of the working medium flowing through a pipeline. They can also be used for flow-control
DOUBLE-ECCENTRIC BUTTERFLY VALVES TYPE L32.7
Application Double-eccentric butterfly valves are industrial valves, which are designed to fully open or close the passage of the working medium flowing through a pipeline. They can also be used for flow-control
THE SOLUTION YOU VE BEEN LOOKING FOR
LPP-D PVEG VLVES POMP LROX PVEG VLVES The Larox PVEG is a general purpose pinch valve. Compact by design, the reliable PVEG valves are well suited for a wide range of applications, which require resistance
WAFER STYLE KNIFE GATE VALVE
11 WAFER STYLE KNIFE GATE VALVE The model knife gate is an uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging shut off
Grooved Butterfly Valves
Grooved Butterfly Valves Design Rating: PN10, PN16 Design: UNE EN 539 Grooving dimensions: ANSI/ AWWA C 606 97 Face to face: MSS SP 67 Piping assembling: ANSI B3610, ISO 4200, DIN 2448, BS 1387, BS 3600
KNIFE GATE VALVES -- MODEL D
PRODUCT DESCRIPTION Flanged unidirectional knife gate valve for high pressure applications One piece integral cast body with seating wedges and bolted bonnet. High flow rates with low pressure drops. Several
Series 240 Type 3351 Pneumatic On/off Valve
Series 240 Type 3351 Pneumatic On/off Valve Application Shut-off valve with tight shut-off for liquids, gases and vapors according to DIN or ANSI standards Valve size DN 15 to 100 NPS ½ to 4 Pressure rating
elbow ball check valves Patents no.: US 8,146,618 B2, US 8,082,949 B2 in-line ball check valves Patent no.: US 8,146,618 B2 PRODUCT CATALOG
elbow ball check valves Patents no.: US 8,1,18 B, US 8,08,99 B in-line ball check valves Patent no.: US 8,1,18 B PRODUCT CATAOG Version 09.017 SZUSTER system is a brand of innovative products which, due
HEAVY DUTY KNIFE GATE VALVE
HEAVY DUTY KNIFE GATE VALVE The model knife gate is an uni-directional lug type valve designed according to MSS-SP-81 and TAPPI TIS 405-8 for industrial service applications. The design of the body and
Technical changes kept in reserve WAFER STYLE KNIFE GATE VALVE. DN 50 to DN 250: 10 kg/cm² DN 300 to DN 400: 6 kg/cm²
WAFER STYLE KNIFE GATE VALVE The A model knife gate is an uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging shut off
HOPPER SHAPE KNIFE GATE VALVE
HOPPER SHAPE KNIFE GATE VALVE The C model knife gate is a uni-directional wafer valve designed for industrial bulk handling service applications (powdered and granular products). makes it ideal for use
HYDRO-TITAN. Heavy duty back pullout water & process liquid pumps
HYDRO-TITAN Heavy duty back pullout water & process liquid pumps Positioned for Reliability The total cost of a pump includes not only purchase price, but cost of operation: power costs, reliability, ease
Water Supply and Sewerage Approved Products Manual - February 2006
Water Supply and Sewerage Approved Products Manual - February 2006 Pressure Sewerage Products Valves Section SPO 01 Last updated Jan 2007 CONTENTS SPO 1-S1 GAS RELEASE VALVE A SPO 1-S2 COMBINATION GAS
Centered Rubber Seated Valves DS Series
Centered Rubber Seated Valves DS Series The Power to Perform. Orton is part of Truflo International plc, a leading supplier of specialist flow control products, with a presence on each continent. Orton
KNIFE GATE VALVE Product Ref. : KG02W/KG02L
General Description Model KG02 is a bidirectional knife gate valve suitable for most industrial application cases. With one piece body design, it combines robust and economy giving best cost effective
Installation Operation Maintenance
Installation Operation Maintenance www.challengervalves.com.au 1 Index 1. INTRODUCTION 1.1 General Application 3 1.2 Technical Data 3 1.3 Features 4 1.4 Operation 4 1.5 Design Constraints 4 2. TECHNICAL
AG1-BC BUTTERFLY VALVE
AG1-BC BUTTERFLY VALVE From 1970 close to our clients Technical datasheet Butterfly valve.. Edition 9.4 09/2016 ANGODOS Since 1970 ANGODOS has been technological leader in valves industry, manufacturing
Dual Plate Check Valve
Dual Plate Check Valve Belgicast Model C Ruber-Check Dual plate check valve Wafer type 40/1200 PN 10/16/25/40 Features: Dual plate check valve with soft wafer type seat for fitting between flanges. For
CHECK VALVES. Bolted Bonnet - Full Opening - Pressure Seal - Wafer Dual Plate, Single Plate & Tilting Disc.
A Long Experience in Energy Equipment and one Goal: The Customer s satisfaction. CHECK VALVES Bolted Bonnet - Full Opening - Pressure Seal - Wafer Dual Plate, Single Plate & Tilting Disc. Swing Check Valves
WAFER STYLE KNIFE GATE VALVE
WAFER STYLE KNIFE GATE VALVE The EX(SER.10) model knife gate is an uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging
THROUGH CONDUIT KNIFE GATE VALVE. OBX 09/11 2nd EDITION Revision 1 Reserves the right to change specifications without notice
THROUGH CONDUIT KNIFE GATE VALVE The model knife gate is a bi-directional wafer valve designed for media with high consistency. The double seat design assures a non-clogging shut off on either normal or
Cast Iron Valves. Product Information. It s all at Albion
Cast Iron Valves Product Information It s all at Albion ART 77-78 Cast Iron Ball Valve Flanged Ends Flange Mounting PN16 Only ISO 5211 Direct Mount (Not 200mm) Art 77/78 Plated Brass/Stainless Ball BS
P R O D U C T R A N G E
PRODUCT RANGE OVERVIEW Range of Materials AUSTRALIAN PIPELINE VALVE BRAND Australian Pipeline Valve (APV) manufactures a complete Cast iron, Ductile iron (GGG40) range of ASME, API, BS and AS valves such
ay Manifold Mounted KHP3K
3-Way ay Manifold Mounted Ball Valves KHP3K up to 500 bar up to DN 32 1. DESCRIPTION 1.1. GENERAL According to DIN 2429, FLUTEC 3/2-way manifold mounted ball valves are units for shutting off and diverting
Válvulas AG1-BD BUTTERFLY VALVE. From 1970 close to our clients
Válvulas AG1-BD BUTTERFLY VALVE From 1970 close to our clients Technical datasheet Butterfly valve.. Edition 2.5 06/2017 ANGODOS Since 1970 ANGODOS has been technological leader in valves industry, manufacturing
The excellent performance of the pressure seal type range, is optimal in high pressure and high temperature applications.
The excellent performance of the pressure seal type range, is optimal in high pressure and high temperature applications. Features Swing check valves can fit on both horizontal and vertical (up-flow) piping.
Two-Way Soft Seated Ball Valve Type 75-S
Two-Way Soft Seated Ball Valve Type 75-S Design Characteristics Two piece body Floating ball Blow out proof stem ive loaded stem packing Design Standards EN 12516, EN 1983, ISO 5211, AD-2000 ASME B16.34,
KNIFE GATE VALVES -- MODEL A
PRODUCT DESCRIPTION Wafer style, uni-directional knife gate valve. One piece integral cast body with guides to support the gate and seating wedges. High flow rates with low pressure drops. Several seat
Forged 3 Piece Trunnion Mounted Ball Valves Series MS
Forged 3 Piece Trunnion Mounted Ball Valves Series MS Construction: 3 piece bolted side entry Trunnion housings 4 Trunnion retainer plates 6 Metal Seated Chrome carbide and tungsten carbide trims Uni-directional
FIG. EA PIECE FIRESAFE BALL VALVES
FIG. EA-305 3-PIECE FIRESAFE BALL VALVES AGA-APPROVED MANUAL & AUTOMATIC FIG. EA-305 BALL VALVE FIGURE NUMBERING SYSTEM E A 305 F C X SE BS SW BW FL EMICO BRAND VALVE SYMBOL SERIES NUMBER BODY MATERIAL
These PFA and PTFE lined products offer a reliable solution in hazardous applications
These PFA and PTFE lined products offer a reliable solution in hazardous applications Features Check valves Heavy duty body in ductile iron GGG4.3 (ASTM A-395). Heavy duty PFA or PTFE lining. Borosilicate
WE CONTROL WHAT MATTERS
WE CONTROL WHAT MATTERS Valve control solutions for gas processing plants Industrial Control Valves and Regulators Ramén Valves Control Made in Sweden Industries Ramén Ball Sector Valve Type KS, designed
flowit by Fig. FTBGW-20 Bronze Gate Valve, Non-Rising Stem BS 5154 PN20 Material Specifications Dimensions (mm)
flowit flowit by Bronze Gate Valve, Non-Rising Stem BS 5154 PN20 Fig. FTBGW-20 Designed to BS 5154 Pressure Rating: PN20 Threaded Bonnet End connection: BS21 Taper Threaded (ISO 7) / BS EN10226-2 Shell
BI-DIRECTIONAL KNIFE GATE VALVES XD-PRE SERIES WITH D/A PNEUMATIC ACTUATOR
BI-DIRECTIONAL KNIFE GATE VALVES XD-PRE SERIES KGV XD-PRE SERIES FULLY LUGGED WITH RISING STEM & HANDWHEEL KGV XD-PRE SERIES FULLY LUGGED WITH D/A PNEUMATIC ACTUATOR KGV XD-PRE SERIES FULLY LUGGED WITH
Series V2001 Valves Clean Tech Type 3321CT Globe Valve with pneumatic actuator
Series V2001 Valves Clean Tech Type 3321CT Globe Valve with pneumatic actuator DIN version Application Compact control valve for the process industry Valve size DN 15 to 50 Pressure rating PN 16 to 40
FKB INDÚSTRIA DE EQUIPAMENTOS LTDA. KNIFE GATE VALVE VGU-29 (Rev. 02/2016)
General Description The model FKB VGU-29 brings an economic solution to block abrasive and corrosive fluid sewage for granulometry until 5mm. They are light equipments, to be installed through flanges,
HOPPER SHAPE KNIFE GATE VALVE
HOPPER SHAPE KNIFE GATE VALVE The model knife gate is a uni-directional wafer valve designed for industrial bulk handling service applications (powdered and granular products). The special design of the
Bolted bonnet configuration
The bolted bonnet type valves are manufactured to guarantee the highest performance in the widest spectrum of oil and gas applications Features Swing check valves can fit on both horizontal and vertical
BUTTERFLY VALVE 27 SERIES Pneumatic actuator - El-O-Matic
C D E FIGURE: PD: pneumatic actuator, double acting PE: pneumatic actuator, spring return PEO: pneumatic actuator, spring return, normally open BUTTERFLY VALVE 27 SERIES Pneumatic actuator - El-O-Matic
AUTOMATIC VALVES. The solution you ve been looking for THE SOLUTION YOU VE BEEN LOOKING FOR
al s AUTOMATIC VALVES The solution you ve been looking for LAROX AUTOMATIC VALVES Larox automatic valves are ideal for shut off or control applications that involve abrasive or corrosive slurries, powders
FKB INDÚSTRIA DE EQUIPAMENTOS LTDA. KNIFE GATE VALVE VGU-05 (Rev. 08/2015)
General Description The FKB Knife-gate valves model VGU-05 brings cost-effective solution to block the flow of abrasive fluids. These are strong equipments to be installed between flanges, which has Wafer
STEAM EXTRACTION / COLD REHEAD ACTUATED CHECK VALVES
STEAM EXTRACTION / COLD REHEAD ACTUATED CHECK VALVES More than 20 years of experience in design and manufacturing and service of custom made actuated Steamextraction Check valves for the Power Generation
CLASS 400 FORGED BRASS BALL VALVE
CLASS 400 FORGED BRASS BALL VALVE FIG. 214 Screwed body cap, PTFE seats, Blowout-proof stem. Screwed ends to BS 21. Nickel plated body. Chrome plated ball. UNI-FLO NYLON BALL VALVES FIG. 214NS/NB Features:
TRUNNION MOUNTED METAL SEATED BALL VALVES
TRUNNION MOUNTED METAL SEATED BALL VALVES HIGH PERFORMANCE BALL VALVES FOR SEVERE SERVICES PROCESS VALVES STANDARD FEATURES FOR SIDE ENTRY & BOTTOM ENTRY DESIGN 1. Trunnion Mounted The ball is trunnion
OPTIMAL VALVE SOLUTIONS PRODUCT PROGRAM
FLOW CONTROL PRODUCT PROGRAM World Valve Wouter Witzel 1 FLOW CONTROL l PRODUCTS CONTENT: FLOW CONTROL 4-5 BUTTERFLY VALVES 6-7 BALL VALVES 8 GATE VALVES 9 ACTUATED VALVES, SWITCH BOXES & ACCESSORIES 10-11
VAG Non-Return Valves
VAG Non-Return Valves VAG SKR Slanted Seat Tilting disk Check Valve Shaft Bearing bush Disk Seat Nominal pressures PN 10, 16 Nominal diameters DN 200 1400 Fields of application: drinking water, preclarified
butterfly valves high performance TRIPLE OFFSET HP-TRI REV0
high performance EXECUTION 1st OFFSET 2nd OFFSET 3rd OFFSET The BELVEN-TRI series incorporate triple offset disc configuration. With this configuration the disc seal makes contact with body seat, only
Keystone Figure 990 and 920 Resilient Seated Butterfly Valves
A split body thin disc valve for high flow and modulating service Figure 990 - Wafer body design Figure 920 - Lugged body design Features General application Figure 990 and 920 valves are used when modulating
Valves for abrasive applications
Weir Minerals Africa Excellent Minerals Solutions Valves for abrasive applications Isogate slurry valves are the proven choice for today s highly abrasive slurry applications with unique designs developed
Kunkle Bailey 756 safety relief valve
The 756 safety valve combines a top piston guided valve and an unobstructed seat bore with a full lift capability, giving maximum discharge capacity Features Design incorporates an adjustable blowdown
Ball Valves SBV Series full-port
SV: Product Info 23 all Valves, plastomer-lined PM 23 M.00 e December 2006 all Valves SV Series full-port Ideally suited for positive shut-off, flow control and throttling of corrosive, abrasive or even
PROCHEM Stainless Steel Specialists
PROCHEM Stainless Steel Specialists Product solutions for a world of difference PIPING PRODUCTS VALVES PIPING PRODUCTS INSTRUMENTATION VALVES AND ACTUATORS MANUFACTURING INDENT SERVICE HYDRAULIC STAINLESS
WAFER Disc Check Valve
18/04/2013 WAFER Disc Check Valve WAFER swing or tilting disc check valve (can be manufactured with flanges on request). One piece cast body which provides easy evacuation of solid particles contained
Cast Steel Bolted Cover Swing Check Valves Sizes: 2 thru 24 Pressure Class: 150 thru 1500
Cast Steel olted Cover Swing Check Valves s: 2 thru 24 Pressure Class: 150 thru 1500 Manufactured by Newmans 33 Newco Cast Carbon Steel olted onnet Valves Typical Newco Cast Steel olted Cover Swing Check
PF6 Stainless Steel Piston Actuated On/ Off Valves
Page of TI-P7- CH Issue Cert. No. LRQ 9 ISO 9 PF Stainless Steel Piston Actuated On/ Off Valves Description A -port pneumatically actuated on / off stainless steel valve for use on steam, water, air, oil
BALL VALVES BUTTERFLY VALVES GLOBE VALVES GATE VALVES CHECK VALVES KNIFE VALVES Y STRAINERS ACTUATION BALL VALVES SS2020N-300 2 PIECE FLANGED ANSI 300 BALL VALVE Firesafe Certified Full Bore TMF1600 seats
Two-Way Metal Seated Ball Valve Type 16-R
Two-Way Metal Seated Ball Valve Type 16- Design Characteristics Split body Trunnion mounted ball with integral stem ive loaded stem packing Spring loaded seat system Fire Safe design optional Design Standards
Pipeline Accessories. Rubber Steel gasket Type RSG Type RSG-V Type RFG 4 pipes
Pipeline Accessories Rubber Steel gasket Type RSG Type RSG-V Type RFG 4 pipes Flange Gaskets Type RSG 4 pipes Reg.Nr. NG-5113CQ0574 Trinkwasser KTW/W270 Product Information RSG 4 pipes Rubber-Steel-Flange-Gasket
IN-LINE DISC & PISTON VALVES
ID & IP Series IN-LINE DISC & PISTON VALVES PROCESS VALVES IN-LINE DISC & PISTON VALVES M Seal In-Line Piston Valve Code: IPYM Large valves utilize a non-rising stem to minimize overall length Live loaded
Two-Way Metal Seated Ball Valve Type 75-M
Two-Way Metal Seated Ball Valve Type 75-M Design Characteristics Two piece body Floating ball Blow out proof stem ive loaded stem packing Fire Safe design optional Design Standards EN 12516, EN 1983, ISO
DOUBLE GATE KNIFE GATE VALVE. OBX 09/09 8th EDITION Reserves the right to change specifications without notice
DOUBLE GATE KNIFE GATE VALVE The model knife gate is a bi-directional valve widely used in the Pulp and Paper industry (recycling or secondary fibre processing) designed to handle high concentrated or
OPTIMAL VALVE SOLUTIONS PRODUCT PROGRAM
FLOW CONTROL OPTIMAL VALVE SOLUTIONS PRODUCT PROGRAM World Valve Wouter Witzel 1 FLOW CONTROL l PRODUCTS CONTENT: FLOW CONTROL 4-5 BUTTERFLY VALVES 6-7 BALL VALVES 8 GATE- AND GLOBE VALVES 9 KNIFE GATE
Check Valves DN PN 80, 100, 160
47 DN 300-1000 PN 80, 100, 160 Designed to automatically prevent back flow of working medium, when transmitting non-aggressive natural gas and other non-aggressive media at the temperature ranged -60 C
Size : Ends : Min Temperature : Max Temperature : Materials : Cast iron body. Certificate 3.1
Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 40 to DN 600 Between flanges PN10/16-15 C + 110 C ( 130 C C temporarily) Max Pressure : 16 Bars up to DN300, 10 bars over Specifications
Type 455, 456. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. US Units
Type 455, 456 Flanged Safety Relief Valves spring loaded US Units Facts The-Safety-Valve.com LWN 468.08-E 462.01-D 40 Cap H2 19 Lock nut 18 Adjusting screw 16 Upper spring plate 9 Bonnet 12 Spindle 54
CAST STEEL GATE VALVE
CAST STEEL GATE VALVE DESIGN CHARACTERISTICS OF API00 CAST STEEL GATE VALVE The design of thrust bearing makes valve opened easily and flexibly. Handwheel Nut Handwheel Stem Nut Retainer Stem Nut Lubricating
WEDGE & SLAB GATE VALVES
GW & GS Series GATE VALVES WEDGE & SLAB GATE VALVES PROCESS VALVES WEDGE GATE AND SLAB GATE VALVES FOR SPECIAL APPLICATIONS Wedge gate Valves Code: GW2M Hand wheel for small sizes Large size valves have
SVL488 Stainless Steel Safety Valve for Clean Service Applications
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
Mounting and Operating Instructions EB 8222 EN. Type 3310/AT and Type 3310/3278 Pneumatic Control Valves. Type 3310 Segmented Ball Valve
Type 3310/AT and Type 3310/3278 Pneumatic Control Valves Type 3310 Segmented Ball Valve Fig. 1 Type 3310/3278 with positioner Fig. 2 Type 3310/AT Mounting and Operating Instructions EB 8222 EN Edition
WE KEEP IT IN HARMONY WITH THE EARTH
WE KEEP IT IN HARMONY WITH THE EARTH Control valve solutions for the mining industry Industrial Control Valves and Regulators About Ramén valves Ramén Ball Sector Valve Type KS, designed and manufactured
BUTTERFLY VALVE WAFER TYPE of carbon steel 311 ( ) series
Operation WAFER TYPE of carbon steel 311 (310-312) series C ont R o L Description Edition 23-07-2015 Wafer type butterfly valve 311 (310 312) series is used in industrial pipelines for demanding on-off
UNIWORLD series PNEUMATIC VALVES
UNIWORLD series PNEUMATIC VALVES 5100AD/E 07 2013 SINGLE SEAT TWO WAY ON-OFF VALVES PED 97/23/CE / ATEX 94/9/CE / MACHINERY DIRECTIVE 2006/42/CE TYPE 5100 AD Normally open air closes Face-to-face ASME
HEAVY DUTY KNIFE GATE VALVE. ANSI B16.5 (class 150) and DIN PN 10
HEAVY DUTY KNIFE GATE VALVE The SERIES knife gate is a uni-directional lug type valve designed according to the MSS-SP-1 and TAPPI TIS 405- standard for industrial service applications. The design of the
KEYSTONE BUTTERFLY VALVE PARASEAL RANGE
The ParaSeal range features a proven disc, shaft and seat arrangement designed for use in high pressure and high velocity applications FEATURES GENERAL APPLICATION Water, food and beverage processing,
Floatation Systems. Pipeline Hose Polyethylene. Rotational. Pontoon. Viscount Rotational Mouldings. Collar Slurry
Floatation Systems Mouldings Rotational Collar Slurry Pipeline Hose Polyethylene Pontoon Floatation Systems Mouldings Pty Ltd (VRM) has been providing solutions to the market for over 25 years. VRM forms
A U S T R A L I A founded 1948
A U S T R A L I A founded 1948... all about moving fluids Regent Pumps Vertical Turbine Pumps has a wide ranging applications. Typical application include:- Water Treatment Plants Water Well Steel Mill
Champion Valves, Inc. DUAL DISC SPRING LOADED WAFER CHECK VALVES
Champion Valves, Inc. DUAL DISC SPRING LOADED WAFER CHECK VALVES FEATURES Light weight, versatile design 80% to 90% less than conventional full-body swing check valves Dual Disc open to 80 degrees Spring-loaded
COMPANY PROFILE TABLE OF CONTENT. Our products have been supplied to local and foreign customers for the following industries:
UTTERFLY VALVES TALE OF CONTENT COMPANY PROFILE The company ARMATURY Group a.s. is a leading Czech manufacturer and distributor of industrial valves, fittings and control systems for valves. The annual
PRODUCT CATALOGUE. Kerr Valves & Industrial Supplies (Pty) Ltd.
PRODUCT CATALOGUE Kerr Valves & Industrial Supplies (Pty) Ltd 2018 www.kerrvalves.co.za About Kerr Valves & Industrial Supplies (Pty) Ltd Since its establishment in 1982, Kerr Valves and Industrial Supplies
Series 240 Pneumatic On-off Valve Type 3351
Series 240 Pneumatic On-off Valve Type 3351 Application Control valve with a tight shutoff of liquids, gases and steam in accordance with DIN or ANSI standards Nominal sizes DN 15 to 100 NPS ½ to 4 Nominal
Saddle valves KH210GR - KH230GR
Saddle valves KH210GR - KH230GR Manufacturer: Keulahütte GmbH Geschwister-Scholl-Str. 15 02957 Krauschwitz GERMANY Production and distribution of tapping valves: Tapping valves according to DIN 3543 with
KEYSTONE BUTTERFLY VALVE PARASEAL RANGE
The ParaSeal range features a proven disc, shaft and seat arrangement designed for use in high pressure and high velocity applications FEATURES GENERAL APPLICATION Water, food and beverage processing,
RUBBER SLEEVE KNIFE GATE VALVE
RUBBER SLEEVE KNIFE GATE VALVE The model knife gate is a bi-directional wafer valve equipped with two metallic coved rubber sleeves designed for use in the handling of abrasive slurries, mainly in industries
Valves Range RVRX - Resilient Seated Gate Valve PN16 Flange
Valves Range RVRX - Resilient Seated Gate Valve PN16 Flange No Component Material 1 Body Ductile iron GGG40 2 Wedge DI Fully Vulcanised EPDM 3 Wedge Nut Brass 4 Stem SS420 5 Bolt Q235+Zinc 6 Gasket EPDM
PN16 Resilient Seated Gate Valves DN50 - DN600
PN16 Resilient Seated Gate Valves DN50 - DN600 Series: VGR16 Gate Valve or Sluice Valve: The great naming debate The correct terminology referencing control valves for fluid media has, for many years,
Two-Way Soft Seated Ball Valve Type 14-S
Two-Way Soft Seated Ball Valve Type 14-S Design Characteristics Two piece body Trunnion mounted ball Blow out proof stem ive loaded stem packing Spring loaded seat system Fire Safe design optional Design