Parts Manual 6.0M & 8.0M. Turbo Max. Copyright 2018 Printed 09/11/ P

Transcription

1 Table of Contents Part Number Index Parts Manual Turbo Max 6.0M & 8.0M Read the Operator's manual entirely. When you see this symbol, the subsequent instructions and warnings are serious - follow without exception. Your life and the lives of others depend on it! Cover illustration may show optional equipment not supplied with standard unit. Copyright 2018 Printed 09/11/ P

2 Table of Contents Table of Contents Part Number Index Section 1: Introduction...4 Using This Manual...4 Manual Replacement Information...4 Manual Revisions...4 Touch-up Paint...4 Hardware Legend...5 Replacement Hardware...5 Serial Numbers...5 Part Number Service Coding...5 Section 2: Frames...6 Hitch Assembly...6 Center Frame...8 Wing Assembly...10 Center Gang Bar Assembly...12 Wing Gang Bar Assembly...14 Lights...16 Decals...18 Section 3: Transport...20 Center Transport and Detracker...20 Axle Arm & Center Axle...22 Section 4: Hydraulics...24 Hydraulic Depth Control Assembly...24 Center Lift Hydraulics...26 Center Gang Hydraulics...28 Wing Lift & Gang Hydraulics...30 Fold & Re-track System...32 Hydraulic Cylinder ( C 4X10X38 ROD)...34 Hydraulic Cylinder ( C 3.75X10X38 ROD)...36 Hydraulic Cylinder ( C 3.75X5X38 ROD)...38 Hydraulic Cylinder ( C 3.50X5X25 ROD)...40 Hydraulic Cylinder ( C 4.0X40X2 ROD)...42 Section 5: Gangs...44 Turbo Gang Assembly...44 Section 6: Optional...46 Weight Package, Optional...46 Section 7: Brakes...48 Air Brakes...48 Park Brake Assembly...50 Section 8: Attachments...52 Rolling Harrow Assembly...52 Heavy Reel Following Rolling Harrow Assembly...54 Part Number Index...56 Copyright 2018 All rights reserved Printed 09/11/18 Great Plains Manufacturing, Inc. provides this publication as is without warranty of any kind, either expressed or implied. While every precaution has been taken in the preparation of this manual, Great Plains Manufacturing, Inc. assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained herein. Great Plains Manufacturing, Inc. reserves the right to revise and improve its products as it sees fit. This publication describes the state of this product at the time of its publication, and may not reflect the product in the future. Great Plains Manufacturing, Incorporated Trademarks The following are trademarks of Great Plains Mfg., Inc.: Application Systems, Ausherman, Land Pride, Great Plains All other brands and product names are trademarks or registered trademarks of their respective holders. Printed in the United States of America P /11/18

3 Table of Contents Part Number Index Alphabetized Table of Contents Selected Models A Air Brakes...48 Axle Arm & Center Axle...22 C Center Frame...8 Center Gang Bar Assembly...12 Center Gang Hydraulics...28 Center Lift Hydraulics...26 Center Transport and Detracker...20 D Decals...18 F Fold & Re-track System...32 H Heavy Reel Following Rolling Harrow Assembly...54 Hitch Assembly...6 Hydraulic Cylinder ( C 4X10X38 ROD)...34 Hydraulic Cylinder ( C 3.75X10X38 ROD)...36 Hydraulic Cylinder ( C 3.75X5X38 ROD)...38 Hydraulic Cylinder ( C 3.50X5X25 ROD)...40 Hydraulic Cylinder ( C 4.0X40X2 ROD)...42 Hydraulic Depth Control Assembly...24 L Lights...16 P Park Brake Assembly...50 R Rolling Harrow Assembly...52 T Turbo Gang Assembly...44 W Weight Package, Optional...46 Wing Assembly...10 Wing Gang Bar Assembly...14 Wing Lift & Gang Hydraulics /11/ P

4 Table of Contents P Part Number Index -4-09/11/18

5 Table of Contents Part Number Index 09/11/ P

6 Hitch Assembly Table of Contents Part Number Index P /11/18

7 Hitch Assembly Table of Contents Part Number Index Section 2: Frames Ref. Part No. Part Description Comments Revision dwg H C C C C C C C C C C C D C C H D C D C C C C C C C C C C H C C C S C H D C H C H H C C C C C D D C C C C C D C Image No. EURO HITCH FRAME HHCS 1 1/4-7X8 GR8 PLT WASHER FLAT 1 1/4 SAE PLT NUT HEX TOP LOCK 1 1/4-7 PLT SQUARE SCREW JACK 5000LBS. CAT 4 RING-SCHARMULLER CAT 3 RING-SCHARMULLER WASHER LOCK M20 PLT HHCS M20X5X70 GR8.8 HHCS 1-8X8 GR8 PLT SPTHD HYDRAULIC HOSE HOLDER 3/8" HYDRAULIC HOSE HOLDER 1/2" HYD HOSE HOLDER TOP PLATE HOSE CLIP 9/16 ID HHCS 5/16-18X3 GR5 H-BRACKET SHUNT VALVE MOUNT HHCS 5/16-18X3/4 GR5 SAFETY CHAIN 20000LB HHCS 7/8-9X3 GR5 WASHER FLAT 7/8 SAE PLT WASHER LOCK SPRING 7/8 PLT NUT HEX 7/8-9 PLT SPRING HOSE LOOP HEAVY HHCS 1/2-13X1 GR5 WASHER LOCK SPRING 1/2 PLT WASHER FLAT 1/2 USS PLT BUSHING CYL 1 1/4 X 1 X 1 BUSHING SPINDLE 1 1/2X1 1/4X1 H - BRACKET PIN CLEVIS 1 X 2 29/64 USABLE WASHER MACH 5X00X.075 PIN COTTER 3/16 X 2 LEVEL TURNBUCKLE NUT HEX LOCK 1-8 PLT EURO LEVEL LINK HHCS 1 1/4-7X8 1/2 GR8 SPTH HHB 1-8X6 GR8 PLT SPTHD TURNBUCKLE SUB ASSY RH THREAD NUT HEX JAM 1 1/2-12 PLT TURNBUCKLE SUB ASSY TURNBUCKLE SUB ASSY LH THREAD MANUAL PAK 1" W/GASKET HHCS 1/4-20X1 GR5 MINI END WHEEL PRESS WHEEL WASHER LOCK SPRING 1/4 PLT NUT-HEX 1/4-20 PLT TRNBCKLE WRENCH 2 5/ /16 GANG WRENCH 1 3/4 PIN LYNCH 3/16 W/COTTER/CHAIN NUT HEX 5/16-18 PLT COUNTERBALANCE VALVE MAN. T.T HHCS 5/16-18X4 GR5 WASHER LOCK SPRING 5/16 PLT MANUAL CONTAINER MNT DECAL GP PLANTING COMPONENT Includes items Attach to bracket on the center frame 09/11/ P

8 Center Frame Table of Contents Part Number Index P /11/18

9 Center Frame Table of Contents Part Number Index Section 2: Frames Ref. Part No. Part Description Comments Revision dwg H H H H H H S H H H H C H C C H C H H H D D D C C C C C C C C C C C C C C C C C C C C C C C C C C S C C C Image No. CENTER FRAME FRONT WING REST REAR WING REST LEVELING STRAP CYL MNT BAR TMN/6.0M CYL MNT BAR 8.0M TURNBUCKLE H-BRACKET REAR LEVEL BAR LEVEL BAR SPRING ROD SPRING SPACER SPRING COMP 4.5ODX125WX13L SPRING GUIDE NUT HEX 1 1/2-6 PLT NUT HEX JAM 1 1/2-6 PLT SINGLE COULTER MOUNT FIXED BYP DP VALVE W/O SOL WING LOCK HANDLE WING LOCK WING LOCK LOCK LINK LOCK LINK TUBE RND - 3/4 OD HHCS 1/2-13X4 GR5 HHCS 5/8-11X1 1/2 GR5 NUT HEX TOP LOCK 5/8-11 PLT NUT HEX TOP LOCK 1/2-13 PLT NUT HEX TOP LOCK 3/4-10 PLT WASHER FLAT 1/2 SAE PLT WASHER FLAT 3/4 SAE PLT PIN COTTER 3/16 X 1 1/2 PLT SPRING DIA.3.65 L 155 HHCS 3/4-10X2 1/2 GR5 WASHER LOCK SPRING 3/4 PLT NUT HEX 3/4-10 PLT HHCS 3/4-10X2 1/2 GR8 HHCS 1-8X3 1/4 GR8 SPTHD NUT HEX LOCK 1-8 PLT HHCS 1-8X4 GR8 SPTHD HHCS 1-8X5 1/2 GR5 BUSHING CYL 1 1/4 X 1 X 1 BUSHING 1 1/4X1X1/2 HRD U-BOLT 5/8-11 X 5 1/32 X 4 3/4 WASHER LOCK SPRING 5/8 PLT NUT HEX 5/8-18 PLT HHCS 3/8-16X3 GR5 WASHER FLAT 3/8 USS PLT WASHER LOCK SPRING 3/8 PLT NUT HEX 3/8-16 PLT COULTER HUB ASY 5/8 WAVY - 20" TURBO BLADE RHSNB 1/2-13X1 1/4 GR5 NUT HEX FLANGE 1/2-13 GR G PLT Model 6.0M Model 8.0M 09/11/ P

10 Wing Assembly Table of Contents Part Number Index P /11/18

11 Wing Assembly Table of Contents Part Number Index Section 2: Frames Ref. Part No. Part Description Comments Revision dwg H H H H H H H H D H S H H C C C C C C C C C D C C C C C C C C C C C C C C C Image No. 8.0/2600 LH WING FRAME 8.0/2600 RH WING FRAME 6.0/1950 LH WING FRAME 6.0/1950 RH WING FRAME LH WING 8.0M AXLE ARM RH WING 8.0M AXLE ARM LH WING 6.0M AXLE ARM RH WING 6.0M AXLE ARM PLATE - TORCHED WING HINGE ARM TURNBUCKLE CYL MNT BAR 8.0M CYL MNT BAR TMN/6.0M CYL REP 3.75X10X38 ROD (TIE) CYL 4.0X40X2 ROD (TIE ROD) HUB ASSY 6-BOLT 350MM PIN HDLS PVT 25X9.0 HRDN HHCS 1/2-13X2 5/8 GR8 SPTHD NUT HEX TOP LOCK 1/2-13 PLT HHCS 3/4-10X2 1/4 GR5 WASHER LOCK SPRING 3/4 PLT NUT HEX 3/4-10 PLT HIINGE PIN TMN PIN SPIROL 3/8 X 2 1/2 PLATED WASHER FLAT 1 1/4 USS PLT NUT HEX LOCK 1-8 PLT HHCS 1-8X3 1/4 GR8 SPTHD SLEEVE BEARING 25 ID X 5 L PIN CLVS 0X3.13 USBL PIN COTTER 3/16 X 2 WASHER MACH 5X00X.075 HHCS 3/4-10X2 1/2 GR5 HHCS 1-8X4 GR8 SPTHD BUSHING 1 1/4X1X1/2 HRD BUSHING CYL 1 1/4 X1 X 1 TIRE/WHEEL 15.0/55-17 EURO TIRE 15.0/ PLT AW705 RIM 17X13 6/161/205 0OFF BKSN (Shown) Model 8.0M Model 8.0M Model 6.0M Model 6.0M (Shown) Model 8.0M Model 8.0M Model 6.0M Model 6.0M (Shown) Model 8.0M Model 6.0M Includeds items 30 & 31 09/11/ P

12 Table of Contents Center Gang Bar Assembly Part Number Index P /11/18

13 Table of Contents Part Number Index Section 2: Frames Center Gang Bar Assembly Ref. Part No. Part Description Comments Revision dwg H H H H C D C S H H C D C C C C C C C C C D C C C C Image No. GANG BAR CTR LH FRONT GANG BAR CTR RH FRONT GANG BAR CTR LH REAR GANG BAR CTR RH REAR CYL REP 3.75X5X38 ROD(TIE) BOTTOM PLATE FRONT BRACKET TURNBUCKLE ASSY TURNBUCKLE WELDMENT TURNBUCKLE END BUSHING HARDENED 1 1/4-1-3/4 L BOLT - 1 1/4 X 13 1/8 PIN COTTER 3/16 X 2 WASHER FLAT 1 1/4 USS PLT NUT HEX SLOTTED 1 1/4-7 HHCS 3/4-10X6 GR5 BUSHING CYL 1 1/4 X 1 X 1 PIN CLVS 0X3.38 USBL WASHER MACH 5X00X.075 PIN CLEVIS 1 X 3 USABLE HHCS 5/8-11X3 1/2 GR5 SPACER WASHER LOCK SPRING 5/8 PLT NUT HEX 5/8-11 PLT WASHER LOCK SPRING 3/4 PLT NUT HEX 3/4-10 PLT 09/11/ P

14 Table of Contents Wing Gang Bar Assembly Part Number Index P /11/18

15 Table of Contents Part Number Index Section 2: Frames Wing Gang Bar Assembly Ref. Part No. Part Description Comments Revision dwg H H H H H H H H C D C S H H C D D C C C C C C C C C C C C Image No. GANG BAR 8M LH FRONT WING GANG BAR 6M LH FRONT WING GANG BAR 8M RH FRONT WING GANG BAR 6M RH FRONT WING GANG BAR 8M LH REAR WING GANG BAR 6M LH REAR WING GANG BAR 8M RH REAR WING GANG BAR 6M RH REAR WING CYL REP 3.50X5X25 ROD(TIE) BOTTOM PLATE FRONT BRACKET TURNBUCKLE ASSY TURNBUCKLE WELDMENT TURNBUCKLE END BUSHING HARDENED 1 1/4-1-3/4 L SPACER BOLT - 1 1/4 X 13 1/8 PIN COTTER 3/16 X 2 WASHER FLAT 1 1/4 USS PLT NUT HEX SLOTTED 1 1/4-7 HHCS 5/8-11X3 1/2 GR5 HHCS 3/4-10X6 GR5 WASHER LOCK SPRING 5/8 PLT NUT HEX 5/8-11 PLT WASHER LOCK SPRING 3/4 PLT NUT HEX 3/4-10 PLT WASHER MACH 5X00X.075 PIN CLVS 0X3.38 USBL PIN CLEVIS 1 X 3 USABLE Shown Model 8.0M Model 6.0M Model 8.0M Model 6.0M Shown Model 8.0M Model 6.0M Model 8.0M Model 6.0M 09/11/ P

16 Lights Table of Contents Part Number Index P /11/18

17 Lights Table of Contents Part Number Index Section 2: Frames Ref. Part No. Part Description Comments Revision dwgtp C C C C C C C C D C C C H H H H D D C C C C H C C C C C C C C C C C C C C C C D C C C C C C Image No. 8.0/6.0M LIGHT HARNESS 8.0/6.0M RETRACT HARNESS SOLENOID POPPET VALVE - DOUBLE NC POPPET SOLENOID VALVE WHISKER TRIP SWITCH PHMS #10-24X2 SS WASHER LOCK #10 NUT HEX PLT SWITCH MOUNT HHCS 1/2-13X3 1/2 GR5 WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT FRONT LIGHT BKT RH EXPORT FRONT LIGHT BKT LH EXPORT REAR LIGHT BKT RH EXPORT REAR LIGHT BKT LH EXPORT EXPORT LIGHT BKT RH EXPORT LIGHT BKT LH FLUORESCENT PANEL SQ RED/WH RED TRIANGLE REFLECTOR LIGHT, YELLOW LAMP LED EURO LIGHT, RED LAMP LED SING. EURO REAR BEACON BKT EXPORT BEACON LIGHT AMBER - LED BEACON LIGHT SWITCH - LED LICENSE PLATE LIGHT - LED U-BOLT 5/8-11 X 4 1/32 X 4 WASHER LOCK SPRING 5/8 PLT NUT HEX 5/8-11 PLT SCREW RD HD X 3/4 PLT WASHER INTERNAL STAR #10 PLT NUT HEX 1/4-20 PLT HHCS 3/8-16X1 GR5 WASHER FLAT 3/8 SAE PLT WASHER LOCK SPRING 3/8 PLT NUT HEX 3/8-16 PLT HHCS 1/4-20X1 1/4 GR5 WASHER FLAT 1/4 SAE PLT WASHER LOCK SPRING 1/4 PLT FRONT LIGHT BRKT 3X2 CLEAR OVAL LIGHT LED REFLECTOR YELLOW 2 DIA DECAL 30KM PER HR REFLECTOR WHITE RECT E-MARKED WASHER FLAT #10 SAE PLT LIGHT HARNESS - SGL TO DBL Plugs into C and then into the solenoids Shown Mounts to the inside There will be a second light on the otherside of the bracket. Used on all rear light brackets 09/11/ P

18 Decals Table of Contents Part Number Index P /11/18

19 Decals Table of Contents Part Number Index Section 2: Frames Ref. Part No. Part Description Comments Revision dwg C C C C C C C C C C C C C C C C C C C C C C C Image No. DECAL DANGER CRUSHING HAZARD DECAL COUPLER STORAGE DECAL DANGER ELECTRICUTION HA DECAL WARNING TOUNGE RISING DECAL CAUTION GENERAL 4X5 DECAL - GP HARVEST SMALL DECAL TURBO MAX DECAL OPERATOR INSTRUCT TM DECAL WARNING HYD PRESS LONG DECAL FOLD VALVE DECAL FLAG DECAL NOTICE TRANSPORT LOCK DECAL DISK DEPTH CONTROL DECAL CUTTING OF FOOT DECAL PIC TIRE NOT A STEP DECAL GP&LOGO HARVEST/3X20 DECAL TM DECAL TM DECAL, FALLING WINGS DECAL, HAND TRAP DECAL, GROUP HAZARDS DECAL WARNING WINGS COULD FALL DECAL WING LOCK EXPORT 2 more of these decals will be used 1 on the outside of the right hand wing and 1 on the other side of the hitch 2 more of these will be used 1 on the outside of the right hand wing and 1 on the other side of the hitch 1 more of these will also be located on the front of the right hand wing 1 more of these will also be located on the front of the right hand wing 09/11/ P

20 Table of Contents Center Transport and Detracker Part Number Index P /11/18

21 Table of Contents Part Number Index Section 3: Transport Center Transport and Detracker Ref. Part No. Part Description Comments Revision dwg C C C C H H H S C C C C C C C A C C C C Image No. TIRE/WHEEL 550/45-25 EURO LH TIRE/WHEEL 550/45-25 EURO RH TIRE 550/ PLY FL648 RIM 25X16 8/221/275 0OFF BKS DETRACKER MOUNT LH DETRACKER ARM RH DETRACKER ARM COULTER HUB ASY COULTER BLADE (TURBO) 15' OD RHSNB 1/2-13X1 1/4 GR5 WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT HHCS 5/8-11X1 3/4 GR5 WASHER LOCK SPRING 5/8 PLT NUT HEX 5/8-11 PLT DETRACKER KIT PUN HTCH.75X4.25 USBL W/PIN HHCS 5/8-11X2 GR5 NUT HEX JAM 5/8-11 PLT NUT HEX FLANGE M20X5 ZNYEL Shown Shown Includes items 5-10 and RH Side Detracker 09/11/ P

22 Table of Contents Axle Arm & Center Axle Part Number Index P /11/18

23 Table of Contents Part Number Index Section 3: Transport Axle Arm & Center Axle Ref. Part No. Part Description Comments Revision dwg C H H H C C C C C C C C C C C C Image No. 2400MM BRAKED AXLE HUB/DRUM CNTR EURO AXLE ARM LIFT LINK H-BRAKET REAR CYL REP 4X10X38 ROD (TIE) HHCS 3/4-10X2 1/2 GR5 WASHER LOCK SPRING 3/4 PLT NUT HEX 3/4-10 PLT HHCS 1-8X4 GR8 SPTHD NUT HEX LOCK 1-8 PLT PIN CLVS 0X3.13 USBL PIN COTTER 3/16 X 2 WASHER MACH 5X00X.075 PIN HDLS PVT 25X9.0 HRDN HHCS 1/2-13X2 5/8 GR8 SPTHD NUT HEX TOP LOCK 1/2-13 PLT Attaches Axle arm to Center Frame 09/11/ P

24 Table of Contents Hydraulic Depth Control Assembly Part Number Index P /11/18

25 Table of Contents Part Number Index Section 4: Hydraulics Hydraulic Depth Control Assembly Ref. Part No. Part Description Comments Revision dwgtp C C C C C H D H C C C S C D C C D H C S D C C C C C C C Image No. HYD VALVE DEPTH CONTROL CROSS HHCS 5/16-18X2 GR5 WASHER LOCK SPRING 5/16 PLT WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT DEPTH STOP BRACKET DEPTH STOP ROD 1/2" THREADED DEPTH STOP END SPRING COMP.781D.125W 63LG WASHER FLAT 1/2 HARD ASTMF436 1/2-13 4XPROJECTION WELD NUT DEPTH STOP ASSEMBLY HHCS 1/2-13X2 1/2 GR5 DEPTH STOP TUBE TMN WASHER FLAT 1/2 USS PLT PIN COTTER 5/32 X 1 1/2 LONG PLATE - TORCHED TMN ANGLE GUAGE HHCS 1/2-13X1 1/4 GR5 TMN GUAGE LIINK TMN ANGLE GUAGE ARM HHCS 3/8-16X1 1/4 GR5 NUT HEX 3/8-16 PLT WASHER LOCK SPRING 3/8 PLT HHCS 3/8-16X1 GR5 NUT TOP LOCK 3/8-16 PLT WASHER FLAT 5/16 USS PLT DECAL TMX GAUGE Includes items /11/ P

26 Table of Contents Center Lift Hydraulics Part Number Index P /11/18

27 Table of Contents Part Number Index Section 4: Hydraulics Center Lift Hydraulics Ref. Part No. Part Description Comments Revision dwgtp C C C S C C D C C C C C C C C C C C C C C C C C C Image No. HG HANDLE - BLACK RET HG HANDLE - BLACK EXT AD 3/4MORB 3/4FORB (HG) HG PAIR - BLACK MORB-FORB CP 3/4FORB MALE QD POPPET TYPE HH1/2R /4FJIC 3/4MORB HOSE WRAP, LARGE SIZE, SHORT (8") AD 3/4MORB 3/4MJIC COUNTERBALANCE VALVE MAN. T.T. EL 3/4MJIC 3/4MORB HH1/2R /4FJIC HH1/2R /4FJIC HH1/2R /4 FJIC EL 3/4FJIC 3/4MJIC TE 3/4MJICBH 3/4MJIC 3/4MJIC TE 3/4MJIC HH1/2R /4FJIC EL 45 3/4MJIC 3/4FJIC HH1/2R /4FJIC HH1/2R /4FJIC HH1/2R /4FJIC EL 3/4MJIC BLKHD W/ LN PL 3/4MORB HOLLOW HEX TE 3/4MJIC 3/4MJIC 3/4FJIC EL 3/4FJIC 3/4MJIC Includes items /11/ P

28 Table of Contents Center Gang Hydraulics Part Number Index P /11/18

29 Table of Contents Part Number Index Section 4: Hydraulics Center Gang Hydraulics Ref. Part No. Part Description Comments Revision dwgtp C C C S C C D C C C C C C C C C C C C C C Image No. HG HANDLE - RED RET HG HANDLE - RED EXT AD 3/4MORB 3/4FORB (HG) HG PAIR - RED MORB-FORB CP 3/4FORB MALE QD POPPET TYPE HH3/8R /4MORB 3/4FJIC HOSE WRAP, LARGE SIZE, SHORT (8") EL 45 3/4MORB 3/4MJIC LOCK VALVE AD 3/4MORB 3/4MJIC EL 3/4MJIC 3/4MORB HH3/8R /4FJIC TE 3/4MJIC RUN BLKHD W/ LN HH3/8R /4FJIC HH3/8R /4FJIC CYL REP 3.75X5X38 ROD(TIE) EL 3/4MJIC BLKHD W/ LN EL 3/4FJIC 3/4MJIC NUT HEX 1/4-20 PLT HHCS 1/4-20X2 1/4 GR5 WASHER LOCK SPRING Includes items /11/ P

30 Table of Contents Wing Lift & Gang Hydraulics Part Number Index P /11/18

31 Table of Contents Part Number Index Section 4: Hydraulics Wing Lift & Gang Hydraulics Ref. Part No. Part Description Comments Revision dwgtp C C C C C C C D C C C C C C C D Image No. HH1/2R /4FJIC HH1/2R /4FJIC HH3/8R /4FJIC HH3/8R /4FJIC HH3/8R /4FJIC HYDRAULIC HOSE HOLDER 1/2" HYDRAULIC HOSE HOLDER 3/8" HYD HOSE HOLDER TOP PLATE WASHER LOCK SPRING 5/16 PLT HHCS 5/16-18X2 GR5 HHCS 5/16-18X1 GR5 EL 3/4MJIC 3/4MORB EL 45 3/4MORB 3/4MJIC CYL REP 3.75X10X38 ROD (TIE) CYL REP 3.5X5X25 ROD (TIE) ORIFICE PLATE 1/16 3/4 8M Only 6M Only 6M Only 6 & 8M 6 & 8M Used when 2 hose holders are used Used when only 1 hose holder is used Used in Rod End ports of Wing Gang Cylinders 09/11/ P

32 Table of Contents Fold & Re-track System Part Number Index P /11/18

33 Table of Contents Part Number Index Section 4: Hydraulics Fold & Re-track System Ref. Part No. Part Description Comments Revision dwgtp C C C S C C D C C C C C C C C C C C C C C C C C C C C C C C C C C D C C C C C C C D C C C C C C C Image No. HG HANDLE - GREEN EXT HG HANDLE - GREEN RET AD 3/4MORB 3/4FORB (HG) HG PAIR - GREEN MORB-FORB CP 3/4FORB MALE QD POPPET TYPE HH3/8R /4MORB 3/4FJIC HOSE WRAP, LARGE SIZE, SHORT (8") EL 3/4MJIC 3/4MORB FIXED BYP DP VALVE W/O SOL AD 3/4MORB EL 45 3/4MORB 3/4MJIC VALVE, TWO WAY, 3/4 FORB HH3/8R /4FJIC HH3/8R /4FJIC EL 3/4MORB X 3/4FORB FILTER INLINE 3/4MORB 3/4MJIC AD 9/16MORB 1/4FNPT PRESSURE GAUGE 3000 PSI SOLENOID POPPET VALVE - DOUBLE NC POPPET SOLENOID VALVE CYL 4.0X40X2 ROF (TIE ROD) EL 45 3/4MJIC 3/4FJIC TE 3/4MJIC TE 3/4MJIC 3/4MJIC 3/4FJIC EL 3/4FJIC 3/4MJIC EL 3/4MJIC BLKHD W/ LN HH3/8R /4FJIC HH1/2R /4FJIC HH3/8R /4FJIC HH3/8R /4FJIC HH3/8R /4FJIC HH3/8R /4FJIC 3/4FJIC AD 3/4MORB 3/4MJIC DOUBLE HYD TEE BLOCK AD 3/4MORB 3/4FJIC EL 3/4MJIC 9/16MORB AD 9/16MORB 3/4MJIC PL 9/16MORB HEX HEAD HH3/8R /4FJIC TE 3/4MJIC RUN BLKHD W/LN HH3/8R /4FJIC ORIFICE PLATE 1/16 3/4 HHCS 5/16-18X3 1/2 GR5 NUT HEX 5/16-18 PLT WASHER LOCK SPRIING 5/16 PLT HHCS 1/4-20X2 1/4 GR5 WASHER LOCK SPRING 1/4 PLT NUT HEX 1/4-20 PLT CABLE TIE.31X25 6DIA 120LB Includes items 1-3 Use C on the Pressure Gauges Routes to the rear Double Tee Block Top Front Port Routes to the rear Double Tee Block Bottom Front Port From the Bottom Side Port of Block to the Base end of the Cylinder, Used on all Fold Cyl From the Top Side port of Block to the Rod end of Cylinder, Used on all Fold cyl Used on ALL ports on Fold Cylinders Used for all Doulbe Tee Blocks Use 2 on all Fold Cylinders 09/11/ P

34 Table of Contents Part Number Index Hydraulic Cylinder ( C 4X10X38 ROD) P /11/18

35 Table of Contents Part Number Index Section 4: Hydraulics Hydraulic Cylinder ( C 4X10X38 ROD) Ref. Part No. Part Description Comments Revision dwg M7016-ADI 2M6816 3R5840 4R5109 5R5118 6R5164-ADI 7M6318 2A0024 2A C C C C C Image No. MIDWAY HARDENED CLEVIS ADI MW ROD 1 3/8 DIA MW HEAD MW PISTON MIDWAY TUBE MIDWAY ADI BASE MW TIE ROD 4 X 10 CYLINDER MW WIPER SEAL U-CUP O-RING MIDWAY BACK UP MIDWAY TEFLON SEAL LOADER WEAR RING O-RING MW PISTON NUT 1-14 MW TIE ROD NUT NUT HEX 3/8-16 PLAIN HHCS 3/8-16X1 3/4 GR5 SEAL KIT MW 4 RPH CYL 4A5103 PIN CLEVIS 1 X 3 1/8 USABLE PIN COTTER 3/16 X 2 09/11/ P

36 Table of Contents Part Number Index Hydraulic Cylinder ( C 3.75X10X38 ROD) P /11/18

37 Table of Contents Part Number Index Section 4: Hydraulics Hydraulic Cylinder ( C 3.75X10X38 ROD) Ref. Part No. Part Description Comments Revision dwg M7016-ADI 2M6816 3R4840 4R4109 5R4118 6R4164-ADI 7M6318 2A0024 2A C C C C C Image No. MIDWAY HARDENED CLEVIS ADI MW ROD 1 3/8 DIA MW HEAD PISTON MIDWAY MIDWAY TUBE MIDWAY ADI BASE MW TIE ROD 4 X 10 CYLINDER MW WIPER SEAL U-CUP O-RING MIDWAY BACK UP MIDWAY TEFLON SEAL LOADER WEAR RING O-RING MW PISTON NUT 1-14 MW TIE ROD NUT NUT HEX 3/8-16 PLAIN HHCS 3/8-16X1 3/4 GR5 SEAL KIT MW 3.75X375 4A4103 PIN CLEVIS 1 X 3 1/8 USABLE PIN COTTER 3/16 X 2 09/11/ P

38 Table of Contents Part Number Index Hydraulic Cylinder ( C 3.75X5X38 ROD) P /11/18

39 Table of Contents Part Number Index Section 4: Hydraulics Hydraulic Cylinder ( C 3.75X5X38 ROD) Ref. Part No. Part Description Comments Revision dwg M7016-ADI 2M6808NC 3R4840 4R4109 5R4108 6R4162-ADI 7M6308 2A0024 2A C C C C C Image No. MIDWAY HARDENED CLEVIS ADI ROD HEAD PISTON TUBE BASE MW TIE ROD MW WIPER SEAL U-CUP O-RING MIDWAY BACK UP MIDWAY TEFLON SEAL LOADER WEAR RING O-RING MW PISTON NUT 1-14 MW TIE ROD NUT NUT HEX 3/8-16 PLAIN HHCS 3/8-16X1 3/4 GR5 SEAL KIT MW 3.75X375 4A4103 PIN CLEVIS 1 X 3 1/8 USABLE PIN COTTER 3/16 X 2 09/11/ P

40 Table of Contents Part Number Index Hydraulic Cylinder ( C 3.50X5X25 ROD) P /11/18

41 Table of Contents Part Number Index Section 4: Hydraulics Hydraulic Cylinder ( C 3.50X5X25 ROD) Ref. Part No. Part Description Comments Revision dwg M7016-ADI 2M5408NC 3R3440 4R3109 5R3108 6R3162-ADI 7M5308 2A0024 2A C C C C C Image No. MIDWAY HARDENED CLEVIS ADI ROD HEAD PISTON TUBE BASE MW TIE ROD MW WIPER SEAL U-CUP O-RING MIDWAY BACK UP MIDWAY TEFLON SEAL LOADER WEAR RING O-RING MW PISTON NUT 1-14 MW TIE ROD NUT NUT HEX 3/8-16 PLAIN HHCS 3/8-16X1 3/4 GR5 SEAL KIT MW 3.5 RPHCYL 4A3104 PIN CLEVIS 1 X 3 1/8 USABLE PIN COTTER 3/16 X 2 09/11/ P

42 Table of Contents Part Number Index Hydraulic Cylinder ( C 4.0X40X2 ROD) P /11/18

43 Table of Contents Part Number Index Section 4: Hydraulics Hydraulic Cylinder ( C 4.0X40X2 ROD) Ref. Part No. Part Description Comments Revision dwgtp M7021-ADI 2S6688NC 3R6012 4M6108 5M6148 6R5162-ADI 7M6348 2A0024 2A C C C C C Image No. MW ROD CLEVIS 00PN 5-12THD MIDWAY ROD MIDWAY HEAD MW PISTON MW TUBE 4.0 X 40 CYLINDER MIDWAY ADI BASE MW TIE ROD 4.0 X 40 CYLINDER MW WIPER U-CUP O-RING MIDWAY BACK UP MIDWAY CROWN SEAL MIDWAY MW PISTON NUT SEAL MW PISTON NUT MW TIE ROD NUT NUT HEX 3/8-16 PLAIN HHCS 3/8-16X1 3/4 GR5 CYL SEAL KIT C PIN CLEVIS 1 X 3 1/8 USABLE PIN COTTER 3/16 X 2 Only in item 18 Only in item 18 Only in item 18 Only in item 18 Only in item 18 Only in item 18 09/11/ P

44 Table of Contents Turbo Gang Assembly Part Number Index P /11/18

45 Table of Contents Part Number Index Section 5: Gangs Turbo Gang Assembly Ref. Part No. Part Description Comments Revision dwgtp D C D C D C D D D D D D D C C C C H D D D D D D C C C C C C C C C C C C C D C H H C Image No. GANG MOUNT BRACKET 5/8 C-FLEX BRG HANGER 1X3 GANG BRACKET MOUNT PEER MF DISK BEARING HALF SPOOL CAST TC COULTER TURBO 20X.256X78 FULL SPOOL 7 1/2 GANG BOLT - 75 X GANG BOLT - 75 X GANG BOLT - 75 X GANG BOLT - 75 X GANG BOLT - 75 X WASHER FLAT 3/4X6 1/2X3/4 THK WASHER DURA-TIGHT 81ID X 7.0 WASHER MACH 2 1/2X1 3/4X10GA NUT HEX SLOTTED 1 3/4-5 REGULR HHCS 5/16-18X3 1/4 GR5 SCRAPER BAR BRACKET SCRAPER BAR /2 SCRAPER BAR - 50 SCRAPER BAR /2 SCRAPER BAR 87 1/2 SCRAPER BAR - 95 SCRAPER - 15 HHCS 3/4-10X6 GR5 WASHER LOCK SPRING 3/4 PLT NUT HEX 3/4-10 PLT HHCS 3/4-10X7 1/2 GR5 HHCS 5/8-11X7 GR8 WASHER LOCK SPRING 5/8 PLT NUT HEX 5/8-11 PLT U-BOLT 1/2-13 X 2 X 3 GR 5 WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT NUT LOCK 3/4-10 PLT WASHER FLAT 1/4 USS PLT NUT HEX NYLOCK 5/16-18 PLT DELTA SCRAPER 7.5 SPACING U-BOLT 1/2-13 X 2 X 3 1/2 GR 5 GANG STOP BRKT RH GANG STOP BRKT LH HHCS 3/4-10X6 1/2 GR5 7 Blade 7 1/2" Space 8 Blade 7 1/2" Space 9 Blade 7 1/2" Space 13 Blade 7 1/2" Space 14 Blade 7 1/2" Space 4 7 1/2" Space 5 7 1/2" Space 6 7 1/2" Space 9 7 1/2" Space /2" Space Requires Lock Nut item 27 Center, Front Gangs All Models Center, Front Gangs All Models Center, Front Gangs All Models 09/11/ P

46 Table of Contents Weight Package, Optional Part Number Index P /11/18

47 Table of Contents Part Number Index Section 6: Optional Weight Package, Optional Ref. Part No. Part Description Comments Revision dwgtp S D D C C D C C A Image No. 750 LB WEIGHT ASSEMBLY PART LB WEIGHT ASSEMBLY PART LB WEIGHT ASSEMBLY HHCS 3/4-10X12 GR5 PLT WASHER FLAT 3/4 SAE PLT PART - WEIGHT BOX WASHER LOCK SPRING 3/4 PLT NUT HEX 3/4-10 PLT 1500 LB TT CENTER FRME WGT KIT Includes items 2 thru 8 09/11/ P

48 Air Brakes Table of Contents Part Number Index P /11/18

49 Air Brakes Table of Contents Part Number Index Section 7: Brakes Ref. Part No. Part Description Comments Revision dwgtp C C C C C C C C C C C C C C C C C C C H D C C C C C C K C C C C C C C C C Image No. AIR COIL, YELLOW W/HANDGRIP AIR COIL, RED W/ HANDGRIP LINE FILTER AD M-M M22X5/M18X5 B/HEAD CONNECTOR M22 M X M16 F SHUNT VALVE SWIVEL ELBOW, 10MM OD X M16 STUD COUPLING, 10MM OD X M16 BRAKE CHAMBER CHAMBER HOSE 2500MM AIR TANK 60 LITERE END MOUNT RESERVOR DRAIN VALVE TEST POINT, M22 SWIVEL ELBOW, 10MM OD X M22 SWIVEL ELBOW, 16MM OD X M22 M22M X M16F REDUCER RELAY-EMERGENCY VALVE PALM COUPLING, YELLOW PALM COUPLING, RED COUPLER STORAGE BKT PALM COUPLER STOWAGE HHCS 5/16-18X1 GR5 NUT HEX 5/16-18 PLT WASHER LOCK SPRING 5/16 PLT NUT HEX 1/2-13 PLT WASHER LOCK SPRING 1/2 PLT U-BOLT 1/2-13X4 1/32X4 COUPLER STORAGE BKT ASSY BLANKING PLUG, M16 TEST POINT M16 BLANKING PLUG, M22 CAP 3/8 F BSPP HHCS 3/8-16X1 1/4 GR8 WASHER LOCK SPRING 3/8 PLT WASHER FLAT 3/8 USS PLT NUT HEX 3/8-16 PLT HHCS 3/8-16X1 3/4 GR5 Hardware comes with Brake to attach to frame and axle. Includes items installed in one of the break chambers installed in one of the break chambers Installed in the cylinder of break pods Attaches relay valve to rear fold stop 09/11/ P

50 Table of Contents Park Brake Assembly Part Number Index P /11/18

51 Table of Contents Part Number Index Section 7: Brakes Park Brake Assembly Ref. Part No. Part Description Comments Revision dwgtp H H D D D D C D D C C C C C C C C C C C C C C C C C Image No. PARK BRAKE CRANK MOUNT CABLE MOUNT RH CABLE MOUNT LH CABLE MOUNT CLEVIS SLOTTED CABLE CONNECTOR BRAKE CHAMBER SPACER SPACER KNOTT - HAND BRAKE ADJUSTER CABLE, PARK BRAKE 110" CABLE, PARK BRAKE 74" HHCS 1/2-13X3 1/2 GR5 HHCS 3/8-16X1 GR5 WASHER LOCK SPRING 3/8 PLT NUT HEX 3/8-16 PLT HHCS 3/8-16X1 1/4 GR5 NUT HEX TOP LOCK 3/8-16 PLT HHCS 3/4-10X3 GR5 WASHER LOCK SPRING 3/4 PLT NUT HEX 3/4-10 PLT U-BOLT 5/8-11 X 4 1/32 X 6 1/2 WASHER LOCK SPRING 5/8 PLT NUT HEX 5/8-18 PLT WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT 09/11/ P

52 Table of Contents Rolling Harrow Assembly Part Number Index P /11/18

53 Table of Contents Part Number Index Section 8: Attachments Rolling Harrow Assembly Ref. Part No. Part Description Comments Revision dwgtp H H H C C C H H D D D C C C C C H D D D C C C H H C C C C C C C H C C Image No. DRAG FRAME TM RH 8M WING DRAG FRAME LH 8M WING DRAG FRAME HHCS 3/4-10X2 GR5 WASHER LOCK SPRING 3/4 PLT NUT HEX 3/4-10 PLT BRACKET - ROLLING HARROW LH BALL JOINT BRACKET ROLLING SPIKE TUBE (64) ROLLING SPIKE TUBE (70) ROLLING SPIKE TUBE (82) U-BOLT 5/8-11X3 1/32X4 1/2 SPT WASHER LOCK SPRING 5/8 PLT NUT HEX 5/8-11 PLT HHCS 1-8X4 GR5 NUT HEX 1-8 NYLON INSERT PLT BEARING HANGER (LONG) ROLLING SPIKE BOLT (68 1/4) ROLLING SPIKE BOLT (74 1/4) ROLLING SPIKE BOLT (86 1/4) BEARING FLG 1 1/2ID 5 IN SQ RHSNB 1/2-13X1 1/2 GR5 NUT HEX TOP LOCK 1/2-13PLT SPIDER WHEEL MED FEATHER SPIDER WHEEL LARGE SPIDER WHEEL FRONT SPACER SPIDER WHEEL REAR SPACER WASHER.13 X 69X 53 PLT NUT HEX SLOTTED 1 1/2-6 PLT HHCS 1/4-20X2 3/4 GR8 PLT WASHER FLAT 1/4 SAE PLT NUT HEX NYLOCK 1/4-20 SPIKE WHEEL SMALL WASHER MACH 25 X 50 X 10GA DECAL AMBER REFLECTOR 2X9 Shown Mount Tube for 10 Wheel Gang (Models 6 & 8M) Mount Tube for 11 Wheel Gang (Model 8M) Mount Tube for 13 Wheel Gang (Model 6M) Shaft for 10 Wheel Gang (Models 6 & 8M) Shaft for 11 Wheel Gang (Model 8M) Shaft for 13 Wheel Gang (Model 6M) One on each side 09/11/ P

54 Table of Contents Part Number Index Heavy Reel Following Rolling Harrow Assembly P /11/18

55 Table of Contents Part Number Index Section 8: Attachments Heavy Reel Following Rolling Harrow Assembly Ref. Part No. Part Description Comments Revision dwgtp L C C H C C C H C C C D C C C D C C C C C H H C C D D C C C H H H C C C C D C C C Image No. REEL ARM ASSEMBLY SPRG COM 47ODX.31WX11 3/8 BL WASHER FLAT 3/4 USS PLT SPRING BOLT PIN 3/4 X 2-1/8 - SNAP RING WASHER 1 1/4 X 3/4 X 18 GA PLT SNAP RING EXT 3/4".042T ADJ SLIDE BRACKET PIN BENT 5/8 X 2 3/4 USBL BOW-TIE LOCK PIN PIN CLEVIS 5/8 X 2 - SNAP RING LINK SNAP RING EXT 5/8 WASHER MACH 00 X.625 X 14GA HHCS 5/8-11X2 GR5 REEL ARM LEVER NUT HEX TOP LOCK 5/8-11 PLT NUT HEX 5/8-11 PLT WASHER LOCK SPRING 5/8 PLT NUT LOKCK 3/4-10 PLT HHCS 3/4-10X4 1/2 GR5 REEL ARM MOUNTING BRACKET U-BOLT 5/8-11 X 4 1/32 X 4 3/4 U-BOLT 5/8-11X2 17/32X3 1/2 PART - 6' REEL PART - 9' REEL REEL MOUNTING BRACKET HHCS 1-8X4 GR5 WASHER FLAT 1 SAE PLT 3 1/2' HD REEL 5' HD REEL 6' HD REEL NUT HEX 1-8 PLT WASHER LOCK SPRING 1 PLT NUT HEX TOP LOCK 1/2-13 PLT WASHER FLAT 1/2 SAE PLT REEL BRG SPACER BEARING FLG 1 1/2ID 5 IN SQ RHSNB 1/2-13X1 1/2 GR5 HHCS 5/8-11X4 GR5 Includes items 2-24 Model 6M Model 6 & 8M Model 6 & 8M Models 6 & 8M Model 6M 09/11/ P

56 Table of Contents Part Number Index Part Number Index The Part Number Index is a numeric index of all part numbers included in this manual. The index shows what page(s) the part is used on. Part Number Page Part Number Page Part Number Page Part Number Page D...31, 33 1M7016-ADI...35, 37, 39, 41 1M7021-ADI D A A , 37, 39, 43 2A , 37, 39, 41, 43 2M5408NC M6808NC M , 37 2S6688NC S...9, 21 3R R , 39 3R R M R R , 39 4R S S S H H S D S H H H D H D D D D D D D D D D D D D D D...27, 29, D H H H D D D D D D D D D S D D D D D D H...13, H H D D...13, D...13, H D D D H H...9, D H H H H H H H H H H H H H H H H H H H H H H H H H H...9, H...9, H H H H H H H H S...9, H H...13, S...13, H S H H H A D D H D H H H H H H K H H H H D H D D D D...13, D D D D D D D D D D A H C H D D D...7, H H H H H L H H H H H M R R R R D R3162-ADI R4162-ADI R4164-ADI R5162-ADI R5164-ADI M M M , 37 7M C C C C C C C C C...17, 25, C... 35, 37, 39, 41, 43, C C C...17, C C C C...21, C C C C...13, 15, C...53, C...25, C...53, C...25, C C C...31, C...13, C C C...9, 11, C...9, C C C C C C C C C C...29, C C C C C C C C C C...7, 17, 29, C...7, 33, C...9, 17, 25, 49, C... 17, 21, 25, 45, 49, C... 13, 15, 17, 21, 45, 53, C...9, C C...45, C... 9, 11, 13, 15, 23, 45, 47, 51, C C C C C C...13, C C...25, C C C...35, 37, 39, 41, C C...9, C C C...7, 9, 11, C C C...9, 11, 23, 53, C C C C...7, 17, 29, C...17, C...7, 25, 31, 33, P /11/18

57 Table of Contents Part Number Index Part Number Index (continued) Part Number Page Part Number Page Part Number Page Part Number Page C C...9, C C...9, 17, 25, 49, C... 7, 17, 21, 25, 45, 49, C...9, C...7, C... 9, 13, 15, 17, 21, 45, 51, 53, C... 9, 11, 13, 15, 23, 45, 47, 51, C C...9, C C C C...11, 13, C C C C C C C C C C...7, 11, 13, 15, C C C C C... 7, 11, 13, 15, 23, 35, 37, 39, 41, C C C C C...13, C... 11, 23, 35, 37, 39, 41, C C C...13, C C C C C...11, C C C C C C C C C C C C C C C C C...7, C C C C...17, C...37, C...17, C C...11, C C C C C...13, C...15, C...9, C C...27, C C...27, 29, 31, C...27, C...27, C C...27, 29, C C...27, 29, C C C C C...27, 29, C C C C C C C C...29, 31, C...29, C C C C C C C C C...27, 29, C C C...13, C C C C C C C C C C C...7, C...7, C C C C C C C C C...53, C C C C C C C C C C C C C C C C C C C C C C C C C...29, C C C C...27, 29, C C...11, C...9, 11, C...9, C C C C C C C C C C...11, C C C C C...27, C C C C C C C C C C C C C C C C C...7, 9, 11, C C...13, C...9, C C C C C C...49, C C C C C C C C C C C C C C C C C C C C C C...51 dwg , 37, 39, 41 dwg dwg dwg dwg dwg dwg dwg dwg dwgtp dwgtp dwgtp dwgtp dwgtp dwgtp dwgtp dwgtp dwgtp dwgtp dwgtp dwgtp dwgtp /11/ P

58 Great Plains Mfg., Inc E. North Street Salina, Kansas USA