Model G015 Gear Flow Meter (Analog) 10 cc/min to 15 liters/min

Transcription

1 recision flow solutions Model G0 Gear Flow Meter (nalog) SECIFICTIOS Flow Range ccuracy (at 0 c) Maximum Operating ressure Displacement Weight Recommended Filtration ort Size(s) Fluids MTERILS OF COSTRUCTIO Bearings Seals LOG TRSMITTER Output Signal ower Supply Requirements ll ball bearings, 440C stainless steel Viton - standard, Teflon, erfluoroelastomer optional ny range of ± 0V or ± 0m Linearized and damped with anti-dither protection. Two Models: 90 m, 4 m mbient Operational Range -40 C to 80 C, Single piece Two piece to 0 C Metered Liquid Temp Range (based on 0 ambient) Compliance ± 0.% of reading over a 00: range, or ± mv (or 4μ), whichever is greater 44 bar (6000 psi) 4. cc/rev.8 kg micron /8" T or #6 SE Most non-aqueous, hydrocarbon based fluids Body Stainless steel, type 0 Gears and Shafts Stainless steel, type C to 90 C, Standard model -40 C to C, Two piece high temperature model -40 C to C, Two piece, ultra high temperature model CE Certified, Ex-proof version available with TEX/IECEx II G Ex db IIB Tx Gb as well as UL, cul certification for Class, Division, Groups C and D, Tx G Rev Max Machinery, Inc.

2 Model G0 Flow Meter (nalog) COECTIVITY/DIMESIOS (ot to scale).9 (49mm) / T.94 (00mm) 4. (0mm) /8" T /8 T /8 T MODEL G0 WITH IDUSTRIL MODEL G0 WITH EX-ROOF. (8mm).07 (78mm) mounting holes /4-0C (4) places 0.6 (7mm) ELECTRICL COECTIO LOG TRSMITTERS 4 in #.7 (44mm) BOTTOM VIEW Turck Connector Mating Cable Wire Color Case Ground Blue Case Common 4 Black Com ower * Brown V+ Signal Output (+) Grey Sig Signal Output ( ) White Ret * lease specify Vdc or 4Vdc operation T model EX-ROOF HOUSIG TO VIEW. (64mm).8 (mm).7 (8mm) REMOTE C ECLOSURE FOR HIGH TEMERTURE TRSMITTERS.048 (mm) ( meter interconnect cable, not shown) G Rev Max Machinery, Max Machinery, Inc. Inc. maxmachinery.com Healdsburg venue Healdsburg, C 9448 T F

3 ositive Displacement Flow Meters Gear Type, G Series Flow Meter Selections Transmitter Selections Model # G0 HS on-standard options - Bi-directional cal BID Transmitter Type Max flow range Liters/min G0 ress u re 6000 psi (44 bar) HS B C D S Output Type 4-0m output powered by 4Vdc 4-0m output powered by Vdc 0-0Volt output powered by 4Vdc 0-0Volt output powered by Vdc V ulse/uad powered by -6Vdc V uadrature - powered by -6Vdc Current Sinking, single phase Temperature rating 90 C C - part tach * C - part tach * Fluid Connection Electrical Connection T Turck connector SE Hazardous location * Seal Selection Viton - FKM Teflon - TFE ** erfluoroelastomer - FFKM SIGL TYE ulse nalog uadrature Options one Heat trace option HT roduct includes single directional calibration, bi-directional calibrations for nalog and uadrature devices are optional. * Consult factory regarding 0 C maximum and other temperature limitations for hazardous location installations. ** Teflon seals are not suitable for operating temperatures above 90 C for these high pressure products. G Rev Max Machinery, Inc.

4 recision flow solutions Model G0 Gear Flow Meter (Frequency) SECIFICTIOS Flow Range ccuracy (at 0 c) Maximum Operating ressure Displacement Weight Recommended Filtration ort Size(s) Fluids ± 0.% of reading over a 00: range 44 bar (6000 psi) 4. cc/rev.8 kg micron /8" T or #6 SE Most non-aqueous, hydrocarbon based fluids MTERILS OF COSTRUCTIO Body Stainless steel, type 0 Gears and Shafts Stainless steel, type 7-4 Bearings Seals ll ball bearings, 440C stainless steel Viton - standard, Teflon, erfluoroelastomer optional FREUECY TRSMITTER Output Signal Output Resolution Optional ower Supply Requirements Vdc square wave Current Sinking, 0m max.- optional Selectable: pulses/rev ( - pulses/cc) uadrature square wave, - 00 pulses/revolution/channel m mbient Operational Range -40 C to 80 C, Single piece Two piece to 0 C Metered Liquid Temp Range (based on 0 ambient) Compliance -40 C to 90 C, Standard model -40 C to C, Two piece high temperature model -40 C to C, Two piece, ultra high temperature model CE Certified, Ex-proof version available with TEX/IECEx II G Ex db IIB Tx Gb as well as UL, cul certification for Class, Division, Groups C and D, Tx ressure Drop (psi) G0F Rev Max Machinery, Inc.

5 Model G0 Flow Meter (Frequency) COECTIVITY/DIMESIOS (ot to scale).9 (49mm) / T.94 (00mm) 4. (0mm) /8" T /8 T /8 T MODEL G0 WITH IDUSTRIL. (8mm) MODEL G0 WITH EX-ROOF mounting holes /4-0C (4) places ELECTRICL COECTIO FREUECY TRSMITTERS 4 in # Turck Connector Mating Cable Wire Color T model Case Ground Blue Case Common 4 Black Com ower (+-6 Vdc) Brown V+ Single hase: ulse Output White h / Grey C uadrature:.7 (44mm) BOTTOM VIEW.07 (78mm) Output hase White h Output hase B Grey h B EX-ROOF HOUSIG TO VIEW. (64mm).8 (mm).7 (8mm) 0.6 (7mm).048 (mm) REMOTE C ECLOSURE FOR HIGH TEMERTURE TRSMITTERS ( meter interconnect cable, not shown) G0F Rev Max Machinery, Max Machinery, Inc. Inc. maxmachinery.com Healdsburg venue Healdsburg, C 9448 T F

6 ositive Displacement Flow Meters Gear Type, G Series Flow Meter Selections Transmitter Selections Model # G0 HS on-standard options - Bi-directional cal BID Transmitter Type Max flow range Liters/min G0 ress u re 6000 psi (44 bar) HS B C D S Output Type 4-0m output powered by 4Vdc 4-0m output powered by Vdc 0-0Volt output powered by 4Vdc 0-0Volt output powered by Vdc V ulse/uad powered by -6Vdc V uadrature - powered by -6Vdc Current Sinking, single phase Temperature rating 90 C C - part tach * C - part tach * Fluid Connection Electrical Connection T Turck connector SE Hazardous location * Seal Selection Viton - FKM Teflon - TFE ** erfluoroelastomer - FFKM SIGL TYE ulse nalog uadrature Options one Heat trace option HT roduct includes single directional calibration, bi-directional calibrations for nalog and uadrature devices are optional. * Consult factory regarding 0 C maximum and other temperature limitations for hazardous location installations. ** Teflon seals are not suitable for operating temperatures above 90 C for these high pressure products. G0F Rev Max Machinery, Inc.

7 CERTIFICTE OF CLIBRTIO Certificate #: 9004 Keep for your records. Customer: Sample Customer ny Street ny Town, C 4 United States Laboratory Location: Max Machinery, Inc Healdsburg ve Healdsburg, C Type of Device: Manufacturer: Model umber: Serial umber: Date of Calibration: 7//0 Sales Order: SMLE rocedure Used: L--07 erformed By: JDO Flow Meter Max Machinery, Inc. G0HS// D4 Calibration Fluid: Hydra Oil Fluid Viscosity: 0 cps Fluid Specific Gravity: 0.8 g/ml Fluid Temp: C +/- C Output Units: ulses/ml Flow Units: ml/min K-Factor: Calibration otes: This document reflects the new linear calibration. The new condition was found to be in tolerance. Calibration Data Flow Rate Output Error Flow Rate Output Error ml/min ulses/ml Frequency Hz % reading ml/min ulses/ml Frequency Hz % reading % -0.0% -0.0% -0.0% 0.0% 0.0% Equipment Used in the Calibration: Calibration ID: 490 Description: Built in reference meter Serial umber: C7407 Cal Due Date: //06 Certificate umber: Built in reference meter C74074 // Built in reference meter C7407 // Temperature Controller 8 // Multifunction D 6769D4 /6/ Counter/timer 677E /6/ C pproval: Calibration Technician Jane Doe uality Manager 7//0 John Doe Lab Technician 7//0 This calibration was conducted using standards traceable to IST. Measurement uncertainty of the #49 test stand is +/- 0.67% of reading with a 9% confidence (k= coverage factor). Calculations are available upon request. Max Machinery, Inc. maxmachinery.com This Certificate shall not be reproduced, except in full, without written approval by Max Machinery, Inc. Healdsburg venue T Healdsburg, C 9448 F rint Date: ov 06 ::4 M age of