DD1 Differential Pressure Gauge Single Diaphragm Type
|
|
- Grant Hodge
- 5 years ago
- Views:
Transcription
1 DD Differential ressure auge Special eatures approved electrical contacts Case & measuring system in SS Dry or liquid filled Standard followed in general EN 87 - pplication Suitable for clean air Compatible gases ertilizer etrochemicals harmaceutical ower Cement Sugar ood & beverages ulp aper llied process industries CE Specifications Standard Version 00 mm & 50 mm ccuracy mbient temperature rocess temperature Static pressure ±.5% of.s. (or ascending order) - 5 C to + 65 C ax. 00 C.5 kg/cm up to ranges kg/cm for ranges 000 to kg/cm for ranges g/cm & above Case & bezel Diaphragm Nuts & bolts rocess connection Seal chamber ovement ISI 04 SS (ayonet Type) Spring Steel with TE protection (ISI 6 SS on request) lsi 04 SS ¼ NT () x Nos. ISI 04 SS ISI 04 SS rotection Dial ointer Case asket Scale mplitude lycerine filled version (option D) ccuracy mbient Temperature rocess Temperature Dampening iquids Other eatures I 68 luminum, black graduation on white background luminum, black coloured, icrometer Zero djustable Shatter proof / Safety lass Neoprene 80 to 70 (Depends on Range) ±4% of. S. (or ascending order) aximum 65 C aximum 65 C lexi lass lycerin 99.7% Refer Specification of Standard Version * lease specify contact set points while ordering. Electrical contacts - dry version ccuracy mbient Temperature rocess Temperature Dampening iquids Electrical Contacts* Other eatures ±% of. S. (or ascending order) aximum 65 C o aximum 65 C olycarbonate Dome Dielectric Oil (Optional) Refer ow to Order Refer Specification of Standard Version Temperature effect The variation of indication caused by effects of temperature is to be calculated by below formula; which is to be added in the specified accuracy while measurement - ormula ± 0.08 x (t - t) % of. S. where t = reference temperature (+0 C) and t = ambient temperature in C. Note The addition of mechanical electric contacts affects the accuracy of instruments such that % becomes.5%,.6% becomes.4% etc. (dd the 50% of accuracy; If the contact is of the magnetically assisted type, this value can t be added within the ±5% of setting point.) Issue. 0/07/06 Design and specifications are subject to change without prior notice age / 5
2 Ensuring ccuracy and erformance DD Differential ressure auge Dimensions - standard version TYE TYE 6 O OW RESSURE CER (With ox) OW RESSURE CER (With ox) TYE OW RESSURE CER (With ox) TYE I RESSURE CER (With ox) Issue. 0/07/06 Design and specifications are subject to change without prior notice age / 5
3 Ensuring ccuracy and erformance DD Differential ressure auge Dimensions - standard version TYE TYE 6 O TYE I RESSURE CER (With ox) I RESSURE CER (With ox) TYE ØU DETIS - CENTER DISTNCE 0 S ØN ØI 54 I RESSURE CER (With ox) Notes Drawings are not to scale. ll Dimensions are in mm. = Nominal Size. Range Table Note We offer ressure, Vacuum and Compound ranges in Scales like ka, a, bar, psi, kg/cm & Dual Scale like ka with psi, ka with bar, bar with psi or scales as per the requirement can be provided on request. ollowing are the example tables for kg/cm & psi scales ressure range (Single Scale) ow ressure igh ressure 0/50 0/400 0/600 0/000 0/600 0/500 0/4000 0/6000 0/ 0/.6 0/ 0/.5 0/4 0/7 0/0 Note Other Scale are available on customer request. ccessories (refer datasheet for complete specifications) * anifolds * Refer catalogue for Valves & anifolds Issue. 0/07/06 Design and specifications are subject to change without prior notice age / 5
4 Ensuring ccuracy and erformance DD Differential ressure auge Electrical Contact Wiring Information Wiring diagrams for electric contacts Single Contact NO NC Opening Closing Double contact NO + NC NC + NC Opening Closing Closing Closing NC + NO NO + NO Closing Opening Opening Opening Issue. 0/07/06 Design and specifications are subject to change without prior notice age 4 / 5
5 Ensuring ccuracy and erformance DD Differential ressure auge Electrical Contact Wiring Information asic odel Code Nominal Size Type of ounting 6 auge rocess Connection (* These connections are provided through adaptors.) 4 4N Diaphragm S S6 Chamber ¼ NT () x ½" S () X Nos. * ¼ NT () x ½" NT () X Nos. * 4 ¼ NT () x ½" S () X Nos. * 4N ¼ NT () x ½" NT () X Nos. * N mm Wall / surface / projection mounting with bottom entry Direct bottom entry " pipe / yoke mounting bottom entry (mounting bracket will be provided of steel epoxy painted.) Center back entry with front flange (suitable for high pressure chamber only) Spring Steel With TE Coating (Standard for Ranges 0.6 kg/cm and bove) ISI 6 SS (Standard for ressure Ranges elow 0.6 kg/cm ) S4 ISI 04 SS (Standard) S6 ISI 6 SS mm ¼ NT () X Nos. (Standard) Example DD X OR X Range Refer range table Options CS D DS CDD TND ST R ISI 6 SS case & bezel Dampening liquid glycerine Dampening liquid silicon oil** Custom designed dial Dial tag marking SS tag plate aximum reading pointer with plexi glass (for dry version)* C TC TC Y4 Y6 DO Conformity as per NCE Standard Calibration certificate traceable to National/International standards aterial test certificates# pipe/yoke mounting bracket (ISI 04 SS) pipe/yoke mounting bracket (ISI 6 SS) Dielectric oil filled** * or ranges.5 and above. ** asket & plug of Viton. # aterial test certificates will be provided for wetted parts only with chemical composition testing. or others, lease consult factory. 0/ X Electric Contacts ( pproved) (or dry version, with ingress protection up to I 55 & poly carbonate dome as a window) ) Single insulated magnetic snap action type ) Inductive type (0 V C, 0.4 mp.) (0 V C, mp.)(48 V DC, 0.5 mp.) (vailable for 000 mm WC & above ) (vailable for & above) Single; normally closed ( NC) Double; normally closed + normally open ( NC + NO) Single; normally open ( NO) Double; normally open + normally closed ( NO + NC) Double; normally closed (both NC) Double; normally open (both NO) D D D D4 D5 D6 Single; normally open ( NO) Single; normally closed ( NC) Double; normally closed + normally open ( NC + NO) Double; normally open (both NO) Double; normally closed (both NC) Double; normally open + normally closed ( NO + NC) Ordering Example DD - - X OR - X / kg/cm - X - or other optional items, please contact factory for delivery and minimum quantity of order. Note Specifications and dimensions given in this product catalogue represents the state of engineering at the time of printing. odifications may take place and materials specified may be replaced by others without prior notice. Issue. 0/07/06 Design and specifications are subject to change without prior notice age 5 / 5
GT All SS Industrial Dial Thermometer Gas Filled system
TM ll SS Industrial Dial Thermometer Gas Filled system Special Features approved electrical contacts. Inert gas filled expansion system. Stainless steel case & stem With or without thermowell Silicon oil
More informationClass 1 as per EN o C to 65o C 15 kg/cm2 ( without thermowell ) 120 % of Full Scale 8 mm ½ BSP (M) Adjustable
Special Features & tex approved electrical contacts. Inert gas filled expansion system. Stainless steel case & stem With or without thermowell Silicon oil filled (optional) Standard followed EN 90. pplication
More informationEGT SS Case Internal Brass Pressure Gauge Bourdon type (Two Part Connection System)
GT Case Internal rass Pressure Gauge ourdon type (Two Part Connection ystem) pecial Features tainless steel case & rass measuring system Rugged construction Dry or liquid filled tandard followed in general
More informationWP6 All SS (SS 316 Wetted Parts ) Pressure Gauge Bourdon type
pecial Features xternal zero adjustment (optional) tainless steel case & measuring system ocket directly welded to case Dry and liquid filled version tandard followed N 837- (for N 00, & 0 mm) C marking
More informationWP4 All SS (SS 304) Pressure Gauge Bourdon type
pecial Features xternal zero adjustment (optional) tainless steel case & measuring system ocket directly welded to case Dry and liquid filled version tandard followed N 837- (for N 00, & 0 mm) C marking
More informationALL STAINLESS STEEL PRESSURE GAUGE
ALL STAINLESS STEEL PRESSURE GAUGE The label Trafag Industrial Components extends the Trafag brand name to instruments manufactured by qualified partner companies. Trafag Industrial Components complement
More informationALL SS ELECTRIC CONTACT PRESSURE GAUGE
ALL SS ELECTRIC CONTACT PRESSURE GAUGE The label Trafag Industrial Components extends the Trafag brand name to instruments manufactured by qualified partner companies. Trafag Industrial Components complement
More informationDIFFERENTIAL PRESSURE GAUGE DIAPHRAGM OPERATED
DIRNTIL PRSSUR U DIPRM OPRTD OST - R SPCIL TURS M PPROVD NCLOSUR I OPRTIN PRSSUR UP TO 100 bar SIMPL ND COMPCT DSIN COST CTIV RLIL PPLICTIONS ILTRS, YDRULIC SYSTMS, WTR TRTMNT PLNTS, CMICL PLNTS, NTURL
More informationALL SS ELECTRIC CONTACT PRESSURE GAUGE
ALL SS ELECTRIC CONTACT PRESSURE GAUGE The label Trafag Industrial Components extends the Trafag brand name to instruments manufactured by qualified partner companies. Trafag Industrial Components complement
More informationINDUSTRIAL THERMOMETER
INDUSTRIAL THERMOMETER The label Trafag Industrial Components extends the Trafag brand name to instruments manufactured by qualified partner companies. Trafag Industrial Components complement the genuine
More informationINDUSTRIAL THERMOMETER
INDUSTRIAL THERMOMETER The label Trafag Industrial Components extends the Trafag brand name to instruments manufactured by qualified partner companies. Trafag Industrial Components complement the genuine
More informationData Sheet Model F5509 and F6509 Stainless steel differential pressure gauge
FEATURES 316L Stainless steel case and wetted parts Static pressure 16 bar or 40 bar Ingress protection IP66/NEMA 4X Compliant to DIN 16003 Dry or liquid filled Optional S3 solid front case TYPICAL USES
More informationBrinda Industries. Process Measuring Instruments.
Brinda Industries Primary Business Address C-1/1301, GIDC Chhatral TA- Kalol, Dist - Gandhinagar, Gujarat - 382729, INDIA. Phone: 91-2764-233434 Fax: 91-2764-233087 E-mail: info@lapressuregauges.com Alternate
More informationSS CASE BRASS PRESSURE GAUGE
SS CASE BRASS PRESSURE GAUGE The label Trafag Industrial Components extends the Trafag brand name to instruments manufactured by qualified partner companies. Trafag Industrial Components complement the
More informationMid-West Instrument. Bellows Type Differential Pressure Gauges & Switches Model s 105 & 106
Bellows Type Differential Pressure Gauges & Switches Model s 105 & 106 Dry Gauge Design with No Internal Liquid Fill BULLETIN NO. 105-106/12 (SUPERSEDES 105-106/11) Industrial ontrol Over Range Protection
More informationProduct Catalog. Our Products. DCI Dynamic Instruments Website: dcidynamic.com
1 Product Catalog Our Products We at Dynamic are proud to present out new technical catalogue detailing our extensive range of Pressure Gauges, Thermometers, diaphragm seal, transmitter and accessories.
More informationTechnical Datasheet. Differential Pressure Gauge Diaphragm DG Range. Performance characteristics. Product applications. How can we help you?
Technical Datasheet Differential Pressure Gauge Diaphragm DG Range Nominal Diameter options of 100mm & 150mm. Degree of Protection IP55/IP65. Stainless steel enclosure as standard. Blowout Protection.
More information82610/ /2-way seat valves
> > ort size: DN 1,5... 5, 1/8... 3/8 (ISO G/NT) > > Suitable for vacuum > > High flow rate > > Functional compact design > > Solenoid interchangeable without tools (c) > > Valve operates without pressure
More informationS21 Series. - 1" NPT - Brass Body - 2-Way Piloted Diaphragm - Normally Open. Dimensions/Weight
S21 Series - 1" NT - Brass Body - 2-Way iloted Diaphragm - s Seals: Nitrile, Viton, Ethylene ropylene Orifice: ilot Stainless Steel Main Brass Ø 1 Electrical Standard Housing: Encapsulated Waterproof Conduit
More informationDIAPHRAGM SEALS. MHP SERIES MINI HIGH PRESSURE Mini diaphragm seal for pressures up to 6000 psi
DIAPHRAGM SEALS seals, also referred to as isolators or chemical seals, are used to protect instruments from viscous, corrosive or very high temperature process media. PIC stocks, fills and calibrates
More informationS21 Series. - 2" NPT - Brass Body - 2-Way Piloted Diaphragm - Normally Open. Dimensions/Weight
S21 Series - 2" NT - Brass Body - 2-Way iloted Diaphragm - s Seals: Nitrile, Viton, Ethylene ropylene Orifice: ilot Stainless Steel Main Brass Ø 1 1/4 Electrical Standard Housing: Encapsulated Waterproof
More informationData Sheet 1009 Stainless Steel Case Gauge
FEATURES Meets ASME B40.100 specifications Corrosion resistant SS case Dry gauges are field fillable PowerFlex movement provides superior resistance to shock, vibration and pulsation True Zero reduces
More informationMid-West Instrument. Piston Type Model 220. Hazardous Locations. Indicating / Non-Indicating Differential Pressure Switch or Transmitter. Min.
Piston ype Model 220 Hazardous Locations BULLEIN NO. 220/11 (SUPERSEDES BULLEIN NO. 220/06) Indicating / Non-Indicating Differential Pressure Switch or ransmitter Low cost piston type differential pressure
More informationAbout Gaugetech Warranty Trademarks Disclaimer
Product Catalog About Gaugetech Gaugetech is a leading manufacturer/distributor of pressure gauges, temperature instruments and related products serving the petrochemical, pulp and paper, hydraulic industries,
More informationBourdon Tube Type Differential Pressure Gauge & Switches Model 109
BULLETIN NO. 109/11 (SUPERSEDES BULLETIN NO. 109/05) Bourdon Tube Type Differential Pressure Gauge & Switches Model 109 LOKED LOGI LRM ONTROLS (vailable with 1 or 2 switches for alarm & control) Over Range
More informationMid-West Instrument. Piston Type Model 220. Hazardous Locations. Indicating / Non-Indicating Differential Pressure Switch or Transmitter
BULLETIN NO. 220/11 (SUPERSEDES BULLETIN NO. 220/06) Mid-West Instrument Piston Type Model 220 Hazardous Locations Indicating / Non-Indicating Differential Pressure Switch or Transmitter Low cost piston
More informationDifferential pressure gauges with Bourdon tube
Differential pressure gauges with Bourdon tube Nominal dia. and with movement of Brass or stainless steel measuring monitoring analysing Description These pressure gauges are suitable for measuring of
More informationTSSE Gas filled thermometer with contacts
Main Features For corrosive gasses and liquids Class 1 according to EN 13190 Wetted parts and case material stainless steel Mechanical or inductive contacts Option: case material 14404 (316L) for aggressive
More informationData Sheet 1009 Stainless Steel Case Gauge
Data Sheet FEATURES Meets ASME B40.100 specifications Corrosion resistant SS case Dry gauges are field fillable PowerFlex movement provides superior resistance to shock, vibration and pulsation True Zero
More informationData Sheet T5500/T6500 Pressure Gauges
Data Sheet FEATURES Easily adjusted micrometer pointer PLUS! Performance dampens vibration, shock and pulsation effects Rugged all welded SS design Overload protection 130% of range Low ambient temperature
More informationDifferential Pressure Gauges Cryo Gauge Model , Cu-alloy Model , Stainless Steel Series
Differential Pressure Gauges Cryo Gauge Model 712.15.160, Cu-alloy Model 732.15.160, Stainless Steel Series Mechanical Pressure Measurement WIKA Data Sheet PM 07.30 Applications Level measurement in closed
More informationTSS Gas filled thermometer
Main Features For corrosive gasses and liquids Class 1 according to EN 13190 Wetted parts and case material stainless steel Option: case material 1.4404 (316L) for aggressive atmosphere pplications Food
More informationMid-West Instrument. Diaphragm Type Differential Pressure Gauge & Switch Model 130. Shown here with Range 0-5 H2O
Diaphragm Type Differential Pressure Gauge & Switch BULLETIN NO. 130/11 (SUPERSEDES BULLETIN NO. 130/02) is a rugged general purpose differential pressure gauge with a 4-1/2" round dial. Common Applications:
More information82170/ /2-way diaphgram valves
> > ort size: DN 8... 50, G1/4... 2 (ISO G/NT) > > For high contaminated fluids > > Solenoid hermetically sealed from fluid > > Compact valve for industrial applications > > Small dimension > > Vacuum
More informationPressure Gauges. Industrial and Process. PGI Series.
www.swagelok.com Pressure Gauges Industrial and Process PGI Series 4, 5, 63, 1, 115, and 16 mm (1 1/2, 2, 2 1/2, 4, 4 1/2 and 6 in.) dial sizes ccuracy in accordance with SME, EN, and JIS vailable with
More informationIsys Micro Series. Valve Products. Operating information. Material specifications. Pilot configuration
atalog 000-3US The Valve System incorporates a space saving back to back valve mounting design, and achieves flow rates of 0.35 v per valve with valves having a combined width of mm. This plug-in valve
More informationP95H Regulator Applications P95H Part Matrix Specifi cations Materials of Construction P95H Flow Coeffi cients Wide Open Coeffi cients
PH Regulator Large Capacity Working Media Include ir, Steam and Liquids ll Vents are Tapped The PH is a direct operating pressure reducing regulator with large capacity. Ideally suited for uses in oil
More informationPressure gauge per EN with mounted diaphragm seal With threaded connection, threaded design Model DSS10M
Pressure Pressure gauge per EN 837-1 with mounted diaphragm seal With threaded connection, threaded design Model DSS10M WIKA data sheet DS 95.01 Applications For aggressive, hot, corrosive, environmentally
More information86740/ /2-way piston valves
> > ort size: DN 8... 50, G1/4... 2 (ISO G/NT) > > Valve operates without differential pressure (Zero delta ) > > Suitable for vacuum > > Damped operation > > Valve piston with TFE guide-ring Technical
More informationADEX Series. Air Control Valves. Section D
X Series ir ontrol alves 00.0 v.8 v.47 v ort 5 ort /8" ort Section www.parker.com/pneu/adex X iking Z asic alve unctions...00 asic alve eatures...0 ommon art umbers / R Type alves...02 odel umber Index
More informationADEX Series Air Control Valves A00.01 Cv M3 Port A05.18 Cv M5 Port A12.47 Cv 1/8" Port zpv02 A B C D E F G H. Section H
X Series ir ontrol alves 00.0 v ort 05.8 v 5 ort.47 v /8" ort zpv02 Section www.parker.com/pneu/adex asic alve unctions... 2 asic alve eatures... ommon art umbers / R Type alves... 4 odel umber Index /
More informationENERPAC hydraulic valves are available in a wide variety of models and configurations.
irectional ontrol s EE hydraulic valves are available in a wide variety of models and configurations. Whatever your requirements directional control, flow control, or pressure control you can be sure that
More informationDifferential pressure gauge Model , copper alloy Model , stainless steel version
Mechanical pressure measurement Differential pressure gauge Model 712.15.100, copper alloy Model 732.15.100, stainless steel version WIKA data sheet PM 07.29 Applications for further approvals see page
More informationPressure Gauges. Industrial and Process. PGI Series.
www.swagelok.com Pressure Gauges Industrial and Process PGI Series 4, 5, 63, 1, 115, and 16 mm (1 1/2, 2, 2 1/2, 4, 4 1/2 and 6 in.) dial sizes ccuracy in accordance with SME, EN, and JIS vailable with
More informationD I V I S I O N O F M A R S H B E L L O F R A M
PH Regulator Large Capacity Working Media Include ir, Steam and Liquids ll Vents are Tapped The PH is a direct operating pressure reducing regulator with large capacity. Ideally suited for uses in oil
More informationDifferential pressure gauge with reed switch Model: P680 series
Differential pressure gauge with reed switch Model: P680 series Spec. sheet no. PD06-10 Service intended P680 series are differential pressure gauge is designed to measure differential pressure from 25
More informationDetector (General, FM/CSA Nonincendive Approval)
No. SS2-MGG200-0100 (Rev.7) Magne 3000 US Smart Electromagnetic Flowmeter Detector (General, FM/S Nonincendive pproval) Model MGG18, MGG19 OVERVIE The Magne 3000 US electromagnetic flowmeter detector is
More informationHeavy Duty Full Stainless Steel Pressure Gauges
Heavy Duty Full Stainless Steel Pressure Gauges Our Range of full Stainless Steel Pressure Gauges offers superior quality & reliability & are ideally suited for harsh conditions & the resulting high demands
More informationSteam & Hot Water INSTRUMENTS. Adjustable Angle Industrial Thermometer. Econo Thermometer. ] Aluminum Stem. ] Air-Duct Stem
Adjustable Angle Industrial Thermometer Recognized globally as the Trerice BX Industrial Thermometer, this is an instrument of extreme accuracy and rugged dependability. Available in scale lengths of 7"(AX),
More informationPilot Operated/Zero Pressure Differential Operation
ilot Operated/Zero ressure ifferential Operation 2 ort Solenoid Valve Series Z Change of valve style from.c. to.o. is simple. xcellent maintainability Separation of movable iron core and diaphragm valve
More informationBULLETIN NO.ELEC IM121/10A Replaces IM121/09A
Mid-West Instrument BULLETIN NO.ELEC IM121/10A Replaces IM121/09A INSPECTION Model 121 Indicating Differential Pressure Switch / Transmitter Electrical: Installation and Operating Instructions Upon receipt
More informationAll Stainless Steel / SS Case Pressure Gauge
All Stainless Steel / SS Case Pressure Gauge 23L, 23B Series HAWK 23L and 23B series bourdon tube all stainless steel pressure gauges with front flange are designed to fulfill the requirements of high
More information/2-way piston valves
> > ort size: DN 15... 100, Flange connection, ressure rating N 40 > > djustable: Damped operation () > > Valve operates without differential pressure (Zero delta ) > > Valve piston with TFE guide-ring
More informationMid-West Instrument. Diaphragm Type Model 240. Hazardous Locations. Indicating / Non-Indicating Differential Pressure Switch or Transmitter
BULLETIN NO. 240/11 (SUPERSEDES BULLETIN NO. 240/06) Mid-West Instrument Diaphragm Type Model 240 Hazardous Locations Indicating / Non-Indicating Differential Pressure Switch or Transmitter Field wireable
More informationDifferential Pressure Gauges Magnetic-Piston Sensing Element with Diaphragm Type
Mechanical Pressure Measurement Differential Pressure Gauges Magnetic-Piston Sensing Element with Diaphragm Type 700.05 WIKA Datasheet 700.05 Applications For use in measurement applications requiring
More information/2-way piston valves
> > ort size: DN 15... 100 Flange connection, ressure rating N 40 > > Valve operates without differential pressure (Zero delta ) > > Suitable for vacuum > > djustable: Damped operation () > > Valve piston
More informationSSI Technologies Application Note PS-AN3 MediaGauge Digital Pressure Gauges Product Overview
Product Description The MediaGauge digital pressure gauges have better accuracy, longer life and standard multiple functions which make it a better choice than mechanical pressure gauges. The MediaGauge
More informationMid-West Instrument. Piston Type Differential Pressure Gauges Switches & Transmitters Model 123
BULLETIN NO. 123/11 (SUPERSEDES BULLETIN NO. 123/03) Piston Type Differential Pressure Gauges Switches & Transmitters A low cost differential pressure gauge for use in measuring the pressure drop across
More informationPressure gauge per EN with mounted diaphragm seal With SMS threaded connection Model DSS19F
Pressure Pressure gauge per EN 837-1 with mounted diaphragm seal With SMS threaded connection Model DSS19F WIKA data sheet DS 95.21 Applications Hygienic pressure measurement in sanitary applications for
More informationDifferential Pressure Gauges Magnetic-Piston Sensing Element with Diaphragm Type
Mechanical Pressure Measurement Differential Pressure Gauges Magnetic-Piston Sensing Element with Diaphragm Type 700.05 WIKA Datasheet 700.05 Applications For use in measurement applications requiring
More informationMid-West Instrument. Piston Type Differential Pressure Gauges Switches & Transmitters Model 120
BULLETIN NO. 120/11 (SUPERSEDES BULLETIN NO. 120/02) Piston Type Differential Pressure Gauges Switches & Transmitters A low cost differential pressure gauge for use in measuring the pressure drop across
More informationDifferential Pressure Gauges (701P Series)
Applications Equipped two Process Connections Indicating low and high pressure Measuring differential pressure as well as liquid or flow levels Recommended to use 3-way & 5-way valve manifold Pressure
More informationDifferential pressure gauge For the process industry Models , , high overload safety up to 40, 100 or 400 bar
Pressure Differential pressure gauge For the process industry Models 732.14, 762.14, high overload safety up to 40, 100 or 400 bar WIKA data sheet PM 07.13 for further approvals see page 4 Applications
More informationGas-actuated thermometer with switch contacts Model 73, stainless steel version
Mechatronic temperature measurement Gas-actuated thermometer with switch contacts Model 73, stainless steel version WIKA data sheet TV 27.01 for further approvals see page 12 Applications Control and regulation
More informationPISTON STYLE GAUGE. Mid-West Instrument
PISTON STYLE GAUGE Mid-West Instrument 1 BULLETIN NO. 120/11 (SUPERSEDES BULLETIN NO. 120/02) Mid-West Instrument Piston Type Differential Pressure Gauges Switches & Transmitters Model 120 A low cost differential
More informationBUSCHJOST SERIES
c Solenoid interchangeable without tools For contaminated fluids the use of a strainer upstream of the valve is recoended. BUSCJOST 82400 SERIES 2/2 - way valves DN 8... DN 50 For neutral gases and liquids
More informationBourdon Tube Pressure Gauges Ultra High Purity (UHP) Series Type
Mechanical Pressure Measurement Bourdon Tube Pressure Gauges Ultra High Purity (UHP) Series Type 230.15 WIKA Datasheet 230.15 Applications Semiconductor and electronic industry, medical industry, gene
More information2/2-way Miniature Solenoid Valve
2/2-way Miniature Solenoid Valve Direct-acting can be combined with... 0... 21 bar DN 1.2... 2.4 mm M5, G1/8 and sub-base 21 mm coil spacing when mounted on manifold Type 2506 Cable plug to DIN EN 175301-803*
More informationMid-West Instrument. Piston Type Differential Pressure Gauges Switches & Transmitters Model 124
BULLETIN NO. 124/12 (SUPERSEDES BULLETIN NO. 124/11) Mid-West Instrument Piston Type Differential Pressure Gauges Switches & Transmitters A low cost differential pressure gauge for use in measuring the
More informationPrecision Bourdon tube pressure gauges
Pressure gauges Precision pressure gauges High accuracy (class 0.6) Housing can be plumbed Serial number on dial Suitable as measuring equipment as per QA requirements DNV- and GOSSTANDART-certified A
More informationHusky 3300 Air-Operated Diaphragm Pump
/ aximiliano Thous, 22. 46009, Valencia (spaña) Operation usky 3300 ir-operated iaphragm Pump 30410 N eavy-duty 3-inch pump with large flow paths for fluid transfer applications, including high-viscosity
More informationElectronic Temperature Control & Bulb Well Assembly (AC)
Electronic Temperature ontrol & ulb Well ssembly () 0916 86816 This is a line voltage single-stage electronic temperature control with singlepole, double-throw relay output and LED indication. It is designed
More informationKDB / VG Series
/ V 9523 Series ontents Introduction........................... 2 onnector design...................... 2 Technical data......................... 3 ounting dimensions.................. 5 ow to order..........................
More information2/2 ^ # (200) General Purpose & Watertight Enclosure Gas Shutoff Valves. Visual Indication & Proof of Closure (Optional) 3/4" to 3" NPT
General urpose & atertight Enclosure Gas Shutoff Valves Visual Indication & roof of Closure (Optional) 3/" to 3" 2/2 Features Unique double disc design with overtravel provides redundant sealing for leak
More informationFilters Regulators Lubricators. Miniature (M1) & Standard (M2) FRL s, Filters, Regulators, Filter-Regulators, Lubricators 10-14
Index What s New FRL s, Thermowells, GG Gauges, 40mm & 50mm Liquid Filled, Digital eters, Diaphragm Seals 2-5 Quick Selector arsh Gauge Selection ade easy! 6-9 Filters Regulators Lubricators iniature ()
More informationBourdon Tube Pressure Gauges Ultra High Purity (UHP) Series Type
Bourdon Tube Pressure Gauges Ultra High Purity (UHP) Series Type 230.15 Mechanical Pressure Measurement WIKA Datasheet 230.15 Applications Semiconductor and electronic industry, medical industry, gene
More informationContents. Series Material Connection Pressure Temperature Function Page. Microsol PPS, PA, Stainless steel Subbase 0-10 bar +30 C 2/2, 3/2 18
Contents Solenoid Valves with Differential ressure - Miniature Solenoid Valves Series Material ressure Temperature Function age Microsol S,, Stainless steel Subbase 0-10 bar +30 C /, 3/ 18 Solenoid Valves
More informationMid-West Instrument. Piston Type Differential Pressure Gauges Switches & Transmitters Model 122
BULLETIN NO. 122/11 (SUPERSEDES BULLETIN NO. 122/01) Piston Type Differential Pressure Gauges Switches & Transmitters A low cost differential pressure gauge for use in measuring the pressure drop across
More informationLow-Speed. Constant Speed Motors. Standard AC Motors A-203. Standard AC Motors Introduction. Low-Speed Synchronous Motors.
Standard C Constant Speed Low-Speed Synchronous Standard C Introduction Induction Reversible Electromagnetic Brake V Series Clutch & Brake Synchronous Low-Speed Synchronous Low-Speed Synchronous Watertight,
More informationValve Products. Viking Lite Series Valves. Operating information. Minimum operating pressure, PSIG (bar) Materials. Recommended air quality for valves
atalog 000-US arker neumatic Valve roducts Viking ite Valves The Viking ite valve range is robust, versatile and combines a large flow capacity with short change-over times, designer may choose /8, / or
More informationSwitches for Pressure to 8000 psig, Vacuum, Differential, or Level Control with General Purpose, Watertight or Explosion-Proof Enclosures
S-SERIES Pressure Switches Switches for Pressure to 8000 psig, Vacuum, Differential, or Level Control with, or s Features: Set point repeatability, +1% of operating range. All wiring terminals, adjustments
More informationApplication The DA03 serves as indicator of differential. Follow mounting instructions in accordance to application.
DA03 Differential Pressure Gauge / Differential Pressure Gauge and Switch Models for Assignment in Explosion-hazardous Areas per Directive 94/9/EC (ATEX) Application The DA03 serves as indicator of differential
More informationPRESSURE GAUGES. Featuring Palmer s. Pressure Gauges
PRESSURE GAUGES Featuring Palmer s Pressure Gauges Palmer Pressure Gauges Catalog Index and Model Selection 25BB Brass Case Gauge 45TS Solid Front Process Gauge 60AB Test Grade Gauge Introduction How To
More informationSOLFRUNT Pressure Gauges and Other Products for the Process Industries
A1 SOLFRUNT Pressure Gauges and Other Products for the Process Industries AMETEK s line of high quality process gauges are specifically designed to meet the demanding needs of the chemical and petroleum
More informationDifferential pressure gauge with switch contacts For the process industry Models DPGS43HP.1x0, high overload safety up to 40, 100, 250 or 400 bar
Pressure Differential pressure gauge with switch contacts For the process industry Models DPGS43HP.1x0, high overload safety up to 40, 100, 250 or 400 bar WIKA data sheet PV 27.13 for further approvals
More informationGauges and Thermometers
Technical Guide Gauges and Thermometers Pressure Gauges Thermometers Altitude Gauges Sprinkler Gauges Industrial Gauges Logo Gauges Ancillary Equipment Pressure Gauges Pressure gauges in this catalogue
More informationViking Lite Series Valves Air Control Valves
atalog 0697 arker neumatic Viking ite Series Valves ir ontrol Valves The Viking ite valve range is robust, versatile and combines a large flow capacity with short change-over times, designer may choose
More informationDifferential pressure gauge with electrical output signal Model A2G-15
Pressure Differential pressure gauge with electrical output signal Model A2G-15 WIKA data sheet PV 17.40 for further approvals see page 5 Applications For monitoring the differential pressure of air and
More informationMSC-125 and MSC-160 Manifolds for Steam Distribution and Condensate Collection.
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationISO Standard Hydraulic Cylinder
ISO Standard ydraulic ylinder Series S/SG Series S Q N Nominal pressure: S Pa ore size :,,,, Related quipment Series SG Nominal pressure: - Pa ore size : 3,,,,, 51 ISO Standard ydraulic ylinder Series
More informationPressure Reducing, Differential and Back Pressure Regulating Valves Spring Loaded Dome Loaded Pilot Actuated
Pressure Reducing, Differential and Back Pressure Regulating Valves Spring Loaded Dome Loaded Pilot Actuated 1 Burling Valves Largest Cv per valve size - Possible smaller, more cost effective valve selections
More informationPressure gauge per EN with mounted diaphragm seal With clamp connection Model DSS22F
JUNE 2018 Pressure Pressure gauge per EN 837-1 with mounted diaphragm seal With clamp connection Model DSS22F WIKA data sheet DS 95.06 TYPE EL Applications Hygienic pressure measurement in sanitary applications
More informationMagneW PLUS+ Electromagnetic Flowmeter Detector (General, FM/CSA Nonincendive Approval)
MagneW LUS+ Electromagnetic Flowmeter Detector (General, FM/S Nonincendive pproval) Model MGG18/MGG19/MGG11 OVERVIEW The MagneW LUS+ electromagnetic flowmeter detector is a high performance, highly reliable
More informationGas-actuated thermometer Highly vibration resistant Model 75, stainless steel version
Mechanical temperature measurement Gas-actuated thermometer Highly vibration resistant Model 75, stainless steel version WIKA data sheet TM 75.01 for further approvals see page 5 Applications For the local
More informationBourdon Tube Pressure Gauges Ultra High Purity (UHP) Series Type
Bourdon Tube Pressure Gauges Ultra High Purity (UHP) Series Type 230.15 Mechanical Pressure Measurement WIKA Datasheet 230.15 Applications Semiconductor and electronic industry, medical industry, gene
More informationDifferential Pressure Gauge
DA03 Differential Pressure Gauge The DA 03 is a versatile differential pressure gauge which can be configured with various optional features, such as: Adjustable limit contacts: delayed action or magnet
More informationO.E.M GAUGES. For Installation and Operation Manuals Please Visit: Mid-West Instrument
O.E.M GAUGES For Installation and Operation Manuals Please Visit: www.midwestinstrument.com/literature Mid-West Instrument Product Notes: BULLETIN NO. 126-127/11 (SUPERSEDES BULLETIN NO. 126-127/00) O.E.M
More informationIndicators. Introduction
Introduction Indicators This range of panel mounting ED indicators consists of many different bezel styles, types of ED s and colours. The range has developed to meet the different needs of panel design
More informationGRW/GRL Sizes NPS 2-36
KEYSTONE The Keystone Series GR is a heavy duty industrial resilient seated butterfly valve aimed at general purpose applications. Features Wafer and lugged body design with face-toface dimension, according
More informationPISTON STYLE GAUGE. For Installation and Operation Manuals Please Visit: Mid-West Instrument
PISTON STYLE GAUGE For Installation and Operation Manuals Please Visit: www.midwestinstrument.com/literature Mid-West Instrument BULLETIN NO. 120/11 (SUPERSEDES BULLETIN NO. 120/02) Mid-West Instrument
More information