Product News THE DRAG SPECIALTIES NOVEMBER (0) partseurope.eu

Transcription

1 YEARS S&S CYCLE S&S Cycle has has been a leader in superior-quality V-Twin performance products since the company started in The new Grand National exhaust systems feature race-inspired styling and the free-flowing design boosts horsepower and torque. Bolt on a set, twist the throttle and enjoy the ride with S&S Cycle GRAND NATIONAL 2-INTO-2 EXHAUST SYSTEMS Free-flow design equals solid hp gains Hidden crossover provides performance benefits of a 2-into-1 system Full heat shields on both front and rear header pipes Stainless steel header construction Race inspired Grand National end caps Available in chrome or black ceramic finish Oxygen sensor ports allow use of wide band or stock O 2 sensors Removable db reducers included Footpeg relocation kit sold separately FOR FXFB Black ceramic Chrome ACCESSORIES Right passenger footpeg relocation kit POWER TUNE DUAL HEADER SYSTEMS ADAPTER KIT Allow you to run the independent dual-look with under the bike cross-over exhaust systems Hidden crossover passage between front and rear pipes for maximum performance Headers sold separately, see the 2018 Parts Europe FatBook Adapter kit for 09, FLHTCUTG MUSCLE STEALTH AIR CLEANER COVER Fits the S&S Stealth air cleaner kits Machined from billet aluminum, fits over the end of the air filter and leaves the filter element exposed Powder-coated gloss black and highlight machined Features muscle car-style hood pins Gloss black w/ S&S logo (0) partseurope.eu

2 PERFORMANCE SERIES 400W AUDIO KIT Kit includes 400W RMS 4-ch amp, 7,25 fairing and 5,25 trunk pod speakers Speakers are waterproof and specified at 140W max power (100W RMS) Amp is a full-range class-d digital amplifier and is fully shielded from AM or FM radio interference Amp has 4 channels of amplification at 100W RMS power per channel with a 2-ohm load Amp measures 7 1 / 4 x 4 3 / 4 x 1 3 / 4 Includes mounting hardware and instructions For FLHTCU PERFORMANCE SERIES 400W AMP KITS Full-range class D digital amplifier Fully shielded from AM or FM radio interference 4 channels of amplification at 100 watts RMS power per channel 2-ohm speaker load For FLHX models For FLTRX/ FLRU models Amplifiers come pre-dialed for FLHX speaker configuration Measures 7 1 / 4 x 4 3 / 4 x 1 3 / 4 Includes mounting hardware and instructions For FLTR models (0) partseurope.eu

3 BR4200 SISSY BAR BAG Two mounting systems included a seat harness or adjustable sissy bar strap system easily attaches bag to motorcycle seat, luggage rack or sissy bar Telescoping handle and inline wheels make for easy off-bike carrying Rugged blend of fabric and leather-grained materials look great on any type of motorcycle; internal structure maintains bag shape even when empty Constructed with UV-, water- and weather-resistant 1200-denier SaddleTuff and leather-like vinyl panels Backrest pad can be adjusted for additional comfort for the passenger or driver Spacious top-loading main compartment is large enough to hold one full-face helmet plus other cargo Includes another large top-loading main compartment Padded laptop storage compartment and organizer pocket Five external pockets, two of which can be expanded for added capacity Five internal mesh pockets Three outer mesh pockets Rain cover with security tether protects the bag from the elements Top exterior flap can be adjusted to carry a jacket BR4200 sissy bar bag LARGE E-PAK PERSONAL ELECTRONICS MAGNETIC POUCH Sized to be used with modern smartphones, such as the Samsung Note or iphone Plus, but can also be used with a variety of GPS units Can be oriented to match the screen format of the device Strong magnets keep the weather-resistant pouch secured to the metal fuel tank Each magnet is shielded to prevent interference with the device s electronics Compartment includes a removable plush pad and foam mat you can trim to custom-fit the device Large plastic window transfers electrostatic energy, allowing for touchscreen operation with bare fingers or electrostatic-transmitting gloves Rubberized pouch back protects the motorcycle s paint finish while the perimeter zipper allows for easy stowage and removal Audio plug access port can be accessed through adjustable zipper opening Dimensions: 11,5 cm W x 18 cm L x 19 mm T (4,5 x 7 x 0,75 ) Large E-pak (0) partseurope.eu

4 AIRHAWK WEEKDAY 2-UP XL SEATS The ultimate in low profile touring just got pumped up Driver and passenger portion of seat each has two inflatable air cells The Airhawk s Comfort Seating System is now integrated into the seat The results are the custom design and production capabilities of Danny Gray with Airhawk s clinician-approved Dry Floatation technology Airhawk s patented system eliminates painful pressure points and is fully customizable to each rider s contour Now, riders can enjoy the same benefits they ve always known of Airhawk but have them built into a revolutionary seat With this patent-pending design, riders can also appreciate continuous airflow through the seat, reducing heat build-up and keeping them cool and dry; no hot seat An integrated pump and relief valve makes it possible to adjust the air pressure while seated Embroidered with a double diamond stitch pattern using charcoal gray thread Optional backrests (sold separately; see the 2018 Parts Europe FatBook) provide additional comfort for any length ride Small backrests measure 23 cm W x 12,5 cm T (9 x 5 ); large backrests measure 25,5 cm W x 20,5 cm T (10 x 8 ) FOR FLHT/ FLHR/ FLHX/ FLTR W/ backrest receptacle WEEKDAY 2-UP XL SEATS The ultimate in low-profile touring comfort Low profile in the driver s portion, this 2-up seat has a substantial pillion seat for the passenger This seat was created to give touring comfort in an attractive and sexy shape The natural leather inserts are able to breathe while the vinyl sides keep their shape in the high-stress points FOR FLHT/ FLHR/ FLHX/ FLTR Double diamond stitch w/ charcoal gray thread CHEROKEE SEATS Pure bobbed and chopped, King/ Queen style Incredible lower back support Covered in the highest-grade black vinyl; double-stitched with bonded polyester thread FOR FLD/ FXD/ FXDWG Diamond pleated seat Powder-coated 16-gauge steel base plate is carpeted to provide a friction-free surface between the seat and fender Rider seating area is 29 cm (11 1 / 2 ) W; passenger seating area is 18 cm (7 ) W FOR FLD/ FXD/ FXDWG (CONT) Pleated seat (0) partseurope.eu

5 EZ-ON SOLO SEATS EZ-On system features an internal rubber mount/ stud system that allows for easy installation and removal No tools needed Automotive-grade vinyl covers Select style has solar-reflective leather in the seating area and automotivegrade vinyl on the sides; patented process reduces surface temperature by as much as 14 C (25 F) for a cooler seat, higher durability and longer life over conventional leather or vinyl FOR FXFB (54,5 CM L OVERALL X 32 CM W (21 1 / 2 X 12 1 / 2 )) Smooth Smooth solar leather Molded flexible urethane foam interior for maximum comfort and styling Seat is made more narrow up front 5 mm ( 3 / 16 ) ABS thermoformed seat base for a perfect fit; fully carpeted bottom with rubber bumpers to protect paint Compatible with fender skins; sold separately (see the 2018 Parts Europe FatBook) FOR FXFB (54,5 CM L OVERALL X 32 CM W (21 1 / 2 X 12 1 / 2 )) (CONT) Scorpion stitch Scorpion silver stitch 1 Not solar-reflective leather. FRONT FORK AIR BAFFLE Stamped steel with a black finish Designed to deflect elements away from the driver For FLT/ FLHT/ FLHR/ FLHX/ FLTR models; repl. OEM# B STEERING STEM BOLT COVER Billet aluminum construction Fits over 15 / 16 steering stem bolt Sold each For XL, FXD w/ 39 mm forks ,4 MM (1 ) HANDLEBARS Steel tubing in a variety of finishes Available in Buckhorn of bends so you get that just-right fit and feel Notched for Throttle-By-Wire applications CHROME GLOSS BLACK FLAT BLACK END RISE WIDTH CENTER WIDTH PULLBACK Buckhorn medium 23 cm (9 ) 86 cm (34 ) 22 cm (8,75 ) 25,5 cm (10,125 ) Buckhorn low 17 cm (6,75 ) 79,5 cm (31,25 ) 22 cm (8,675 ) 23 cm (9 ) (0) partseurope.eu

6 HD RADIO/ BCM CONNECTOR KIT OEM style connector kit Sold each (unless noted) For HD Radio/ BCM connector kit; repl. OEM # H4 to H9/ H11 ADAPTER Used when fitting 18 cm (7 ) Illuminati headlights ( or ) in FLHR and FLHX models Allows H4 connector to plug into the H9 & H11 plugs from the wire harness H4 to H9/ H11 adaptor harness SHIFT LEVERS CNC-machined from billet aluminum Direct bolt-on design for easy installation Perfect complement to RSD s Boss or Traction floorboards FOR FLHT/ FLHR/ FLHX/ FLTRX/ FLTRU, H-D FL TRIKES, FLST Toe shifter, Contrast Cut Toe shifter, chrome Toe shifter, Black Ops Lever heights are adjustable Include Traction toepegs Available in Contrast Cut, chrome and Black Ops finishes FOR FLHT/ FLHR/ FLHX/ FLTRX/ FLTRU, H-D FL TRIKES, FLST (CONT) Heel/ toe shifter, Contrast Cut Heel/ toe shifter, chrome Heel/ toe shifter, Black Ops REAR BRAKE ARMS CNC-machined from billet aluminum Direct bolt-on design for easy installation The perfect complement to RSD s Boss or Tracion floorboards, but also compatible with OEM floorboards Available in Contrast Cut, chrome or Black Ops finishes FOR FLHT/ FLHR/ FLHX/ FLTRX/ FLHTU, H-D FL TRIKES Contrast Cut Chrome Black Ops FOR FLHT/ FLHR/ FLHX/ FLTR, H-D FL TRIKES Contrast Cut Chrome Black Ops FOR FLT/ FLHT/ FLHR/ FLTR Contrast Cut Chrome Black Ops (0) partseurope.eu

7 ELECTRIC EASY SHIFT SPEED SHIFTER KITS Electronically suspends the ignition system, allowing the transmission to smoothly shift up or down with just the push of a button Shift up at partial or full throttle and back down at the touch of a button There is no need to use the foot shifter and the clutch is used only when starting or stopping Works for normal street riding or full-throttle shifting Also a perfect match for male and female riders who own bikes that require a lot of hand strength to pull in the clutch lever OEM shifting ability is retained after installation Includes a dual-button handlebar control, a shift cylinder plated with a lustrous chrome finish, bolt-on shift cylinder support bracket and a state-of-the-art control module that sends a quick signal from the handlebar control to the shift cylinder Also included is the electronic ignition kill module and step-by-step instructions with photos for easy installation For FXFB models For FLFB/ FXBR/ FLHCS models For FXBB/ FXLR models OVERLAND 2.0 GOGGLES Injection-molded polyurethane frame with wide eye port for maximum peripheral vision Frame is now 10% narrower than the original Overland goggle Lenses are laser CNC-cut from impact-resistant polycarbonate plastic that s molded on a perfect arc to deliver distortion-free visual clarity Generous brow vents and discrete ports on cheek pads feature foam filtration to reduce airborne debris Laminated two-phase open-cell foam padding around eye port has molded comfort quilting with brushed Lycra surface to wick moisture from your skin Stitched synthetic leather strap hinge panels add surface tension to eye port for a more secure fit Silicone strips on goggle strap eliminate slipping on slick helmet shell surfaces GOGGLES Include clear and tinted lenses; replacement lenses also available Red/ orange/ yellow Tri-stripe Cream/ orange Racer Olive green camo Grunt (0) partseurope.eu

8 ACCUTRONIX Accutronix has been making high-quality motorcycle parts at a competitive price since Every product they sell has been manufactured, assembled or inspected by a member of the ownership team to ensure the highest standards of quality. Their new extended driver s floorboards combine form, function and clean styling for your ride EXTENDED DRILLED DRIVER FLOORBOARDS Machined from 6061-T6 billet aluminum Mount like stock with stock hardware Original style floorboards have the same dimensions as OEM Instigator style is extended 2 1 / 2 longer in the front and rear and is 3 / 4 wider than stock Teardrop style is extended 2 1 / 8 in front Instigator style is extended 2 1 / 2 longer in the front, 1 longer in the rear and is 3 / 4 wider than stock Feature knurled grip sections or multi-directional slip-resistant pyramid-top rubber inserts Raised holes are inspired by racing pedals Available in black or Night Series (black anodized and then machined again, yielding a contrast of black anodized and raw aluminum finish) Sold in pairs FOR FLT/ FLHT/ FLHX/ FLHR/ FLTR, FLST, FLD FOR FLT/ FLHT/ FLHX/ FLHR/ FLTR, FLST, FLD INSTIGATOR Black Night Series Black, knurled Night Series, knurled ORIGINAL Black Night Series Black, knurled Night Series, knurled TEARDROP Black Night Series TEARDROP (CONT) Black, knurled Night Series, knurled VINTAGE Black Night Series Black, knurled Night Series, knurled MALTESE LICENSE PLATE FRAMES WITH BACKING PLATES 7 x 4 plate fits U.S. motorcycles Backing plate is steel construction Frame is made from aluminum Mounting hardware included Frames can also be purchased separately without backing plate FOR FLHX, FLHXS, FLHRXS, FLTRX, FLTRXS FOR FLHX, FLHXS, FLHRXS, FLTRX, FLTRXS FRAME W/ BACKING PLATE Chrome Matte black Gloss black FRAME ONLY Chrome Matte black Gloss black (0) partseurope.eu

9 PROBEAM LED HEADLAMPS FOR ROAD GLIDE Offers the latest in engineering with modern and sleek design Low beam consists of six high-power advanced optical D lenses and a DRL High beam keeps low beam illuminated and adds four additional advanced optical D lenses Made from heavy-duty, light-weight die-cast aluminum with durable polycarbonate lens Available in chrome or black finish SAE compliant FOR ALL FLTR/ FLTRX/ FLTRU MODELS Black Chrome TRIPLE PLAY TURN SIGNAL CONVERSION KIT Converts rear 1156/ BA15S turn signals to function as run, brake, and turn with choice of 10 user-selectable brake light strobe/ flash patterns Selectable running light intensities Built-in SMART function which allows normal turn signal flash to override the brake/ strobe flash when simultaneously braking and turning Plug-and-play For FLHCS/ FLDE/ FXLR ISOLATOR MODULES Total isolation of all lighting and electrical accessories from vehicle Short circuit protection of all outputs without any relays or fuses Plug and play (except for universal version) 45 amp max total capacity Left turn, right turn, brake, battery, accessory power inputs Isolated outputs: left turn, right turn, brake, run/ accessory Isolated integrated output: turn/ brake output Isolated 4-pin trailer output For FXBB, FXFB, FXBRS, FLSL, FLFBS For FLHX, FLHXS, FLTR, FLTRXS, FLHR, FLHS For H-D Trike models For FLHX, FLTR For FLHXSE, 09 FLTRSE, FLTRXSE, 13 FLHRSE For FLST/ FXST (except Rocker), XL, FLHT, FLHR, FLHRC, FLHX, FLTR, FLTRU/ FLTRUSE, H-D Trike models Universal 12VDC HD-04 SPEEDOMETERS/ TACHOMETERS High-quality plug-n-play design Eight-color changing LCD display Features tachometer, speedometer, odometer, engine temperature and fuel level Six indicator lights; fuel, engine, battery, cruise control, ABS and anti-theft Measures 3,3 dia. without bezel; 3,73 dia. with bezel NOTE: Fits models that use 3 3 / 8 stock mounting cup. FOR SOFTAIL MODELS, DYNA GLIDE, XL MODELS Black bezel Silver bezel FOR DYNA GLIDE, XL MODELS Black bezel Silver bezel (0) partseurope.eu

10 RUSS WERNIMONT DESIGNS Small modifications can make a big difference. Russ Wernimont s philosophy has always been a few finely made parts can create a truly eye-catching custom change to a stock bike. With more than 25 years of custom metal fabrication experience, Russ Wernimont Designs continue to set the standard in custom fabrication. TXR FAIRING KIT Constructed of high-impact black plastic with a smooth finish for easy paint prep Black powder-coated mounting brackets Stereo cutout accepts most double DIN style stereos Speaker cutouts accept most 6,5 small magnet -style speakers (2,3 max. depth) Covers are included for all cutouts if a stereo system is not desired Includes a 14 tinted windscreen, headlight relocation bracket and a universal amp mounting bracket (3,9 x 7,9 x 1,5 max. amp size) Measures 24 W x 23 H NOTE: Headlight wiring may need to be extended in some applications For FXD models (except FXDF/ FXDWG and FLD models) (0) partseurope.eu

11 RS-1 PIGGYBACK COIL OVER SHOCKS Black anodized aluminum shock bodies and piggyback reservoirs 5 / 8 stainless steel shafts High-quality black Eibach springs Feature internal bypass technology for a superior ride Adjustable compression dampening Adjustable spring pre-load to set sag Manufactured by Walker Evans Racing Sold in pairs FOR FLHT/ FLHR/ FLHX/ FLTR (EXCEPT H-D FL TRIKE MODELS) cm (13 ) standard (up to 300 lb. load) cm (13 ) heavy-duty (300 lb.+ load) FOR FXD/ FXDWG cm (13 ) standard (up to 300 lb. load) cm (13 ) heavy duty (300 lb.+ load) ,5 cm (14 ) standard (up to 300 lb. load) ,5 cm (14 ) heavy duty (300 lb.+ load) FOR XL cm (13 ) standard (up to 300 lb. load) ,5 cm (14 ) standard (up to 300 lb. load) DYNA BOLT KIT Required for , , , Requires bolt kit ,5 CM (13,5 ) M-EIGHT SOFTAIL SHOCK Black anodized aluminum shock body and remote mount reservoir 5 / 8 stainless steel shaft High-quality Eibach spring Feature internal bypass technology for a superior ride Adjustable compression dampening Adjustable spring pre-load to set sag Preload wrench included Remote reservoir mount also included Manufactured by Walker Evans Racing Mounts with existing OEM hardware NOTE: Shock is longer than the OEM shock, this will raise the ride height approx. 1 to 2 depending on model For Softail models (0) partseurope.eu