1744 Short Land Musket for Dragoons (728) Nock s Volley Gun (789)
|
|
- Anna Marshall
- 5 years ago
- Views:
Transcription
1 Nock s Volley Gun (789) 1744 Short Land Musket for Dragoons (728) In 1780 the ordinance department ordered 500 of these seven barrel Nock's Volley Guns. The first 3 of these weapons were rifled, but it was found that the rifling was not necessary so all later models were smooth bore. There are 6 outside barrels located around a central barrel. The barrels are 20 " long in.50 caliber. After removing the lock, the barrel section unscrews from the breech unit. The central barrel fires the outside barrels. There was another 106 made up after the Revolutionary War and delivered in 1788, these will have a double throated cock and standard frizzen spring. 789 Set of Lock Castings BP Butt Plate AS Assembled Lock TG Trigger Guard LP *Lock Plate TP Trigger Plate C *Cock TR Trigger TJ *Top Jaw SP Side Plate F *Frizzen FT Front Thimble FS *Frizzen Spring MT Middle Thimble T *Tumbler RT Rear Thimble B *Bridle BRC Breech Castings S *Sear ST Stock SS *Sear Spring RR Ramrod MS *Main Spring TJS Top Jaw Screw 2.95 This musket was considered a carbine with it's 42 " barrel. When first brought into service it had a wooden rammer with the early style lock plate. Notice the lock panel shaping and comb. Actually it is very distinctive in these features. These were made from with the new straight lock being adopted in These were all manufactured with wooden rammers with the exception of two hundred which were made with metal rammers in 1749, using sleeved ramrod pipes. 728 Set of Lock Castings TH Thumbpiece AS Assembled Lock SP Side Plate LP *Lock Plate SLS Side Lock Screw (2 Needed) C *Cock FT Front Thimble (3 Needed) TJS *Top Jaw RT Rear Thimble F *Frizzen FSS Front Sting Swivel FS *Frizzen Spring FSSS Front Sling Swivel Stud T *Tumbler RSS Rear Sling Swivel B *Bridle RRT Ramrod Tip S *Sear BAYB Bayonet SS *Sear Spring BU Barrel Underlugs (3 Needed) MS *Main Spring BRP Breech Plug TJS Top Jaw Screw ST Stock BP Butt Plate RR B Ramrod (Tapered, Brass Tipped) TR Trigger Guard TP Trigger Plate TR Trigger 7.95
2 1756 Light Dragoon Pistol (917) Pattern 1833 Manton Carbine (747) This carbine is the last official flint lock of the British Army and was a result of the trials that began in 1827, it is a composite of many ideas. It is.66 caliber with a 20 " barrel. The lock is very similar to Nocks screwless lock but has an external hammer so moisture couldn't creep into the lock mortise. The lock plate measures 5 3/8 " x 1 1/8 ". The throw of the cock is 1 1/2 ". This new pistol came out in 1756, reducing the barrel length to 10". The barrel was in.66 caliber, which was the same as the carbines. It now has a new flat lock. 917 Set of Lock Castings TJS Top Jaw Screw LP *Lock Plate BC Butt Cap C *Cock TG Trigger Guard TJ *Top Jaw TP Trigger Plate F *Frizzen TR Trigger FS *Frizzen Spring SP Side Plate T *Tumbler RRT Ramrod Thimble (Flared) B *Bridle BRP Breech Plug S *Sear BA Barrel SS *Sear Spring RR Ramrod (Tapered, Brass Tipped) MS *Main Spring ST Stock Set of Lock Castings TR Trigger LP *Lock Plate SP Side Plate C *Cock SSB Side Sling Bar TJ *Top Jaw SSBW Side Sling Bar Washer F *Frizzen BRT Breech Tang FS *Frizzen Spring BRP Breech Plug T *Tumbler BK Barrel Key (2 Needed) B *Bridle UL Underlug (2 Needed) S *Sear NC Nose Cap SS *Sear Spring RT Rear Thimble MS *Main Spring FT Front Thimble SAF *Safety RR Ramrod Complete w/swivel SAFS *Safety Spring RRB Ramrod Button SAFL *Safety Latch RRS Ramrod Swivel TJS Top Jaw Screw RRSA Ramrod Swivel Arm (pair) BP Butt Plate ST Stock TG Trigger Guard (Barrels are available from Getz, Colerain or Rayl) TP Trigger Plate 8.95
3 1756 Long Land Pattern (549) First Model Brunswick Rifle (673) This is the last of the Long Land series Muskets. This model has the metal ramrod and different thimbles. The lock is straight but still has only one screw showing behind the cock. The lock panels are plain with no carving or tear drops. The forearm is slightly fuller and the cast brass nose cap is standard on this model. It has a 46 " tapered round barrel, it is available in.75 or.77 caliber. The lock plate measures 6 7/8 x 1 1/4 Throw size Set of Lock Castings TH Thumbpiece AS Assembled Lock NC Nose Cap LP *Lock Plate SP Side Plate C *Cock SIS Side Lock Screw TJ *Top Jaw FT Front Thimble F *Frizzen MT Middle Thimble (2 Needed) FS *Frizzen Spring RT Rear Thimble T *Tumbler FSS Front Sting Swivel B *Bridle FSSS Front Sling Swivel Stud S *Sear RSS Rear Sling Swivel SS *Sear Spring RR Ramrod MS *Main Spring BAY Bayonet TJS Top Jaw Screw BRP Breech Plug BP Butt Plate BU Barrel Underlugs (3 Needed) TR Trigger Guard TP Trigger Plate (Stocks available hom Bob Lepley) TR Trigger 7.95 Barrel and stock available price on application The first percussion rifle adopted by the British and approved in The original was a 2 grooved barrel shooting a belted ball in.62 calibre, but when production started the calibre was changed to.70 so they could shoot a musket ball if needed. The barrel is 30 3/16 ". Many thanks to William Marean who supplied us the pattern rifle and research for this project. These rifles remained in use until the 1850's. We also have the Russian version of this rifle listed later in this catalogue Bayonets for this rifle are listed in the bayonet section. 673 Set of Lock Castings FT Front Thimble LP *Lock Plate NC Nose Cap PH *Percussion Hammer FSSW Front Sling Swivel T *Tumbler RSSW Rear Sling Swivel B *Bridle PBH Patch Box Head S *Sear PBD Patch Box Door SS *Sear Spring PDBL Patch Box Door Latch MS *Main Spring LSW Lock Screw Washer BRPB Breech Plug Bolster RR Ramrod HBRT Hook Breech Tang BK Barrel Key (3 Needed) RSB Rear Sight Base UL Underlugs (3 Needed) RSL Rear Sight Leaf BL Bayonet Lug FRS Front Sight BAYB Bayonet Blade BP Butt Plate BAYH Bayonet Handle TG Trigger Guard BAYL Bayonet Latch TR Trigger ST Stock TP Trigger Plate MT Middle Thimble 8.95
4 Paget Carbine (601B) Elliot Light Dragoon Pistol (568) Adopted in 1808, this was the basic weapon of the English Cavalry till about Widely used during the Napoleonic Wars as were the Baker Rifle and Baker Carbine. This weapon was sold to Mexico and used against Americans. The Barrel is tapered round 16 " in.65 or.66 caliber. The lock plate measures 4 5/8 " x 7/8. The throw of the cock is 1 1/4 ". 601 Set of Lock Castings TGRRS Trigger Guard Ramrod Spring LP *Lock Plate TP Trigger Plate C *Cock TR Trigger TJ *Top Jaw SB Sling Bar F *Frizzen NC Nose Cap FS *Frizzen Spring RRS Ramrod Swivel T *Tumbler RRSA Ramrod Swivel Arms (pair) B *Bridle RRB Ramrod Button S *Sear RRC Ramrod complete w/swivel SS *Sear Spring TH Thimble MS *Main Spring BK Barrel Keys (2 Needed) SAF *Safety BU Barrel Underlugs SAFP *Safety Spring BRP Breech Plug SAFL *Safety Latch ST Stock TJS Top Jaw Screw BP Butt Plate TG Trigger Guard This is the light dragoon pistol of the 1760's onward and widely used in the American Revolution. It is an all brass mounted pistol. It has a 9 " round barrel in.62 or.66 caliber. The round face lock plate measures 5 3/16 x 15/16. The throw of the cock is 11/ Set of Lock Castings TJS Top Jaw Screw LP *Lock Plate BC Butt Cap C *Cock TG Trigger Guard TJ *Top Jaw TR Trigger F *Frizzen SP Side Plate FS *Frizzen Spring RRT Ramrod Thimble (Flared) T *Tumbler BRP Breech Plug B *Bridle BA Barrel S *Sear RR Ramrod (Tapered, Brass Tipped) SS *Sear Spring ST Stock MS *Main Spring 14.95
5 Flat Lock Carbine Bore Baker (714) Round Lock Carbine Bore Baker (501) This is the most basic design Baker that was settled on and is the most common design that was used throughout the Napoleonic Wars. The very sturdy flat lock with beefy internals was used all the way to The tumbler has a fly so the trigger can be adjusted very light if desired. Heavy springs make this lock fast and dependable. The patchbox is the two compartment design with one compartment for precut patches, the other for the cleaning jag and flints. You will find some of the later productions of this model with the rounded end patchbox. We have reproduced this rifle, as it is considered the first and most predominate production pattern. The barrel is 30.5 " in length with a.62 caliber. The stock has just the right amount of drop and pull to make this the best handling of all the baker designs. The lock plate measures 5 3/8 " x 11/8 The throw of the cock is 11/2 714 Assembled Lock MT Middle Thimble Set of Lock Castings FRS Front Sight LP *Lock Plate RSB Rear Sight Base C *Cock RSIL Rear Sight Leaf TJ *Top Jaw PBD Patch Box Door F *Frizzen PBDH Patch Box Door Head FS *Frizzen Spring PBL Patch Box Latch T *Tumbler RR Ramrod Complete B *Bridle UL Under Lugs (3 Needed) S *Sear BK Barrel Keys (3 Needed) SS *Sear Spring FSSS Front Sling Swivel Stud MS *Main Spring FSS Front Sting Swivel FY *Fly RSS Rear Sling Swivel TJS Top Jaw Screw BRT Breech Tang BP Butt Plate BRP Breech Plug TG Trigger Guard TTS Thumb & Tang Screw (2 needed) TP Trigger Plate SLS Side Lock Screw (2 Needed) TR Trigger BL Bayonet Lug SP Side Plate ST Stock TH Thumbpiece BA Barrel NC Nose Cap FT Front Thimble 8.95 Sometime after 1806 the smaller patchbox started appearing because they no longer were going to use separate patches and a loading mallet. Balls were going to be issued with patches tied around them. At first these patchboxes started appearing on flat lock guns. Then in 1823 the round faced 1796 carbine lock was re adopted along with the new non adjustable rear sight. We also have the 1823 non adjustable rear sight. These later Baker Rifles do not have quite as much drop or length of pull as the earlier Baker Rifles. The lock plate measures 5 1/4 "x 1 " ' The throw of the cock is 11/2 501 Assembled Lock FRS Front Sight Set of Lock Castings RSB Rear Sight Base LP *Lock Plate RSL Rear Sight Leaf C *Cock PBD Patch Box Door TJ *Top Jaw PBDH Patch Box Door Head F *Frizzen PBL Patch Box Latch FS *Frizzen Spring RR Ramrod Complete T *Tumbler UL Under Lugs (3 Needed) B *Bridle BK Barrel Keys (3 Needed) S *Sear FSSS Front Sting Swivel Stud SS *Sear Spring FSS Front Sling Swivel MS *Main Spring RSS Rear Sling Swivel TJS Top Jaw Screw BRT Breech Tang BP Butt Plate BRP Breech Plug TG Trigger Guard TTS Thumb & Tang Screw (2 needed) TP Trigger Plate SLS Side Lock Screw (2 Needed) TR Trigger BL Bayonet Lug SP Side Plate NARS 1823 Rear Sight (Non Adjustable) TH Thumbpiece ST Stock NC Nose Cap BA Barrel FT Front Thimble MT Middle Thimble 7.95
CZ-USA SHOTGUN INSTRUCTION MANUAL CZ-USA
CZ-USA SHOTGUN INSTRUCTION MANUAL CZ-USA SAFETY INSTRUCTIONS Over & Under Shotguns ASSEMBLY Over & Under Shotguns USAGE - Detach the forearm from the barrel. CHOKE TUBES 3 Over & Under Shotguns USAGE ASSEMBLY
More informationThompson/Center. Suggested Loads, Assembly, Disassembly & Cleaning Instructions For The Cap Lock or Flint Lock Fire Storm Only!
Thompson/Center Suggested Loads, Assembly, Disassembly & Cleaning Instructions For The Cap Lock or Flint Lock Fire Storm Only! Read and Understand the booklet entitled, Shooting Thompson/Center Black Powder
More informationAssembling an AR-15 Parts CheckList:
Assembling an AR-5 Parts CheckList: Table of Contents Upper Receiver Common Parts.............................. A, A2 & A3 sights............................................. 2-3 BARREL COMPONENTS.........................................
More informationMPz.B mm AT.RIFLE SS ff WEAPON
MPz.B.41 7.92 mm AT.RIFLE SS ff WEAPON Antitank rifles were effective against lightly armored vehicles. Germany's Waffen SS were the elite troops of the German Army. They prided themselves on their daring,
More informationRifle Factory Ishapore TENTATIVE REQUIREMENT ITEMWISE of RFI for the year through OPEN TENDER ENQUIRY NAME OF THE COMPONENT
5.56mm INSAS 1 Bag Tool Satchel ARDE/TA/94/33/1 INSAS 26754.75 2 Band Retainer 2689/157 INSAS 26754.75 3 BAYONET WITH SCABBARD ARDE SK 2915 INSAS 26754.75 4 Blank firing attachment ARDE SK 2992C INSAS
More informationBROWNING.50 M2 MACHINE GUN, ASSEMBLY
Parts Catalog BROWNING.50 M2 MACHINE GUN, ASSEMBLY Page 1 DEC 2016 PCOOWM2HB phone: 440.285.3481 fax: 440.286.8571 web: ohioordnanceworks.com OOW M2 Configurations M2 HB SKU: 7265636 M2 QCB SKU: M2A1-100E
More informationSU-16C and SU-16CA Exclusive Parts Part# 202 Exchange Only 355
SU-16C and SU-16CA Exclusive Parts Part# 202 Exchange Only 355 384 357 402 137 103 365 438 367 367 434 294 480 481 202 103 C-BARREL 137 GAS BLOCK FRONT SIGHT 202 RECEIVER RECEIVER SCREW 294 O'RING 355
More informationStandard Direct Impingement AR-15 Parts Check List
Standard Direct Impingement AR-15 s List UPPER RECEIVER COMMON PARTS 1. Select (1) of the following UPPER RECEIVER options: Complete Upper Receiver with Barrel, or Complete Upper Receiver Without Barrel
More informationMICRO WHEN SPEED AND ACCURACY MATTER USER MANUAL
WHEN SPEED AND ACCURACY MATTER USER MANUAL FEATURES AND ADVANTAGES The most cost effective conversion kit. The quickest conversion kit assembly on the market today. Toolless installation and no pistol
More informationNZAR ID 158, Arm type SMG, Draft date 8 July 2011, Compiled by Phil Cregeen
NZAR ID 158, Arm type SMG, Draft date 8 July 2011, Compiled by Phil Cregeen Pattern (Name) Sterling Mk4 L2A3, Introduced into NZ Service 1959, Withdrawn 1989. Makers: a. Sterling Engineering Co, Dagenham,
More informationDS, GS, AND DEPOT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LISTS RIFLE CALIBER.30, AUTOMATIC:
D E P A R T M E N T O F T H E A R M Y T E C H N I C A L M A N U A L DS, GS, AND DEPOT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LISTS RIFLE CALIBER.30, AUTOMATIC: BROWNING, M1918A2, W/E
More informationFigure 3-1. MK 67 MOD 7 gun cradle.
CHAPTER 3 GROUND AND VEHICLE MOUNTS The MK 19 is used in either the ground- or vehicle-mount mode. The most often used ground mount is the M3 tripod. The M3 serves as a stable platform when the weapon
More informationQ'ty needed for quotes. No Item No. Description Image. Barrel Parts. Handguard Snap Ring Material: SK5 1 MS Weld Spring Material: 1075
Barrel Parts 1 MS16626-1137 2 8448555 3 8448712 4 9349054BN-01 5 9349054BE 6 A01-0036 7 9349054BIP 8 8448567 9 G02-0001 10 1005-914-3504 11 G02-0002 12 9349054FSHA 13 MS16562-106 14 8448571 15 8448697
More information2014 Lancer Systems all rights reserved
2014 Lancer Systems all rights reserved PROPRIETARY NOTICE: This contains Lancer Systems confidential, proprietary and/or competition sensitive data. ITAR NOTICE: Warning This document contains technical
More informationBlackpowder Firearms
Blackpowder Firearms Blackpowder Firearms Blackpowder Handguns Blackpowder Rifles blackpowder_firearms.html[12/13/2017 11:55:16 AM] Blackpowder Handguns 1) Standard ammunition for these stats is a round
More informationQ'ty needed for quotes. No Item No. Description Image. Barrel Parts. Handguard Snap Ring Material: SK5 1 MS Weld Spring Material: 1075
Barrel Parts 1 MS16626-1137 2 8448555 3 8448712 4 9349054BN-01 5 9349054BE 6 A01-0036 7 9349054BIP 8 8448567 9 G02-0001 10 1005-914-3504 11 G02-0002 12 9349054FSHA 13 MS16562-106 14 8448571 15 8448697
More informationTPG-3 A4 PRECISION SNIPER RIFLE
TPG-3 A4 PRECISION SNIPER RIFLE Unique Alpine TPG-3 A4 MODULAR PRECISION SNIPER RIFLE The new benchmark in precision, modularity and interchange ability, designed to perform under the most critical missions
More informationSTEYR ARMS 3 SUB-MOA GUARANTEE ON ALL BOLT ACTION RIFLES
STEYR ARMS SUB-MOA GUARANTEE ON ALL BOLT ACTION RIFLES STEYR PISTOLS 4-7 STEYR AUG A3 M1 8-11 STEYR PRECISION RIFLES STEYR PRO THB 13 STEYR SSG 04 14-15 STEYR SSG 08 16-17 STEYR SSG 08-A1 18-19 STEYR HS.50-M1
More informationArtillery Projectiles, Fuzes and Propellants. By: God of War
Artillery Projectiles, Fuzes and Propellants By: God of War Royal Canadian Artillery School Table of Contents Introduction 1 Main Topic 1 Projectiles 1,2 Fuzes 2,3,4 Propellants 4,5,6 Conclusion Sources
More informationMIURA II. to quickly select which barrel to shoot first under hunting conditions. The Miura
MIURA II MIURA II: GA and GA, 3 stainless steel receiver, satin walnut The over and under double trigger model is favorite of traditionalists. It s easier to quickly select which barrel to shoot first
More informationClark Firearm Collection
Clark Firearm Collection 1763-1964 INTRODUCTION This collection of military shoulder arms includes arms examples of most of the principal types issued to United States troops during and since the American
More informationKeppeler Sporting Rifles
Quality for top Scorers Keppeler Sporting Rifles Modular Sporting Rifles Metal Stock K0 0 9 9 Order No. 000 Metal stock Free Rifle K0 (,kg) Order No.000 Front sight carrier Order No. 0000 Metal stock Standard
More informationTrouble Shooting Guide For HIPERTOUCH Series Triggers
1 PROBLEM: No Hammer Fall Scenario #1 1) The hammer does not fall when the trigger is pulled when the gray (plain) toggle springs are installed; but, nudging the hammer will cause it to fall. When the
More informationTransmission Overhaul Procedures-Bench Service
How to Assemble the Lower Reverse Idler Gear Assembly Special Instructions In 1996 Eaton changed the reverse idler system design. In the nut design, the reverse idler bearing was lubricated through a hole
More informationExit Devices Rainer Security Products Ltd
Exit Devices Rainer Security Products Ltd Unit B6, Rudford Industrial Estate, Ford, Arundel, West Sussex BN18 0BF +44 (0) 190 72211 rainersecurity.co.uk sales@rainersecurity.co.uk 2 S1150 & S1250 Series
More informationEVERY RIFLE STARTS WITH A PRECISION BARREL
2019 LINEUP EVERY RIFLE STARTS WITH A PRECISION BARREL A HISTORY OF PRECISION With the most technically-advanced barrel manufacturing techniques, state-of-the-art machinery, and an unwavering commitment
More informationDOLARIAN CAPITAL, INC.
New, Used & Refurbished Weapon Systems www.dolarian.com AMMUNITION HIGH STNADARD A LL RIFLE MANUFACTURED NEW TO U NITED S TATES M ILITARY S PECIFICATIONS COMMANDO 7.5 Barrel Flat Top, 5.56mm NATO, Collapsing
More informationCommunication & Low Voltage. Communication & Low Voltage
145 Communication & low Voltage Cable Supports cable ties up to 9 /32" wide from flanges 1 /16" to 3 /4" thick. 8" cable tie included. Simply installed with a hammer. BE Series BF Series 78101119970 BE-2-4-CT2
More informationDangerously exciting & excellence effect...
www.atakarms.com Dangerously exciting & excellence effect... About us Except the fact that gunsmith business was a profession of ancestors and a regional business of Zafer YİĞİT born in Beyşehir and Hüseyin
More informationAccessories. Aluminum Duplex Sleeves (Hour glass shape) Aluminum Oval Sleeves. Copper Duplex Sleeves or Copper Zinc Plated Duplex Sleeves Code Copper
Accessories Aluminum uplex Sleeves (Hour glass shape) Weight / each approx. AOS-132 1/32.0002 AOS-364 3/64.001 AOS-116 1/16.001 AOS-564 5/64.002 AOS-332 3/32.003 AOS-018 1/8.006 AOS-532 5/32.008 AOS-316
More informationLeft handed Intergraded Nonreciprocating LINCH. Davis Tactical Solutions Patent Number:
Left handed Intergraded Nonreciprocating Charging Handle LINCH Davis Tactical Solutions Patent Number: 8117954 Table of contents 1. PRODUCT OVERVIEW 2. RIFLE COMPATIBILITY 3. OPTICAL RAILS AND ACCESSORIES
More informationDoor Lock Collection
Door Lock Collection Table of Contents 11 Series Heavy Duty Cylindrical Lever Lock 02, 03 Heavy Duty Cylindrical Knob Lock 04, 05 22 Series Medium Duty Cylindrical Lever Lock 06, 07 Medium-Duty Cylindrical
More informationHeat treated cylinder wall and chromed piston
JULY AUG SEPT 2015 AXLE OIL DRAIN PAN MODEL 8830 & 8831 Catches Oil from hubs after removing the cap Fits on the rims of buses, trailers and large trucks Prevents an oil mess during wheel repair Side opening
More informationCopyright 2013 by Modern Gun School Modern Schools of America P.O. Box 846 St. Albans, VT
Copyright 2013 by Modern Gun School Modern Schools of America P.O. Box 846 St. Albans, VT 05478-0846 Printed in the United States of America. All rights reserved. Modern Gun School Introduction Congratulations
More informationIrontite Products Inc. Irontite by Kwik-Way & Irontite by Kwik-Way of Canada, Ltd. (319) FAX (319)
Parts & Instruction Manual Irontite Products Inc. Irontite by Kwik-Way & Irontite by Kwik-Way of Canada, Ltd. 1-800-423-3384 PO BOX 9877, (Main) Cedar Rapids, 1-800-821-7520 Iowa 52409 (EST) USA (319)
More informationFeatures and Specifications for Impact Wrenches
Pneumatic Air Tools Version 2017 Revised 06/2017 Email your order to: sales@polyconn.com or fax to (763) 398-2590. www.polyconn.com. Questions call: (763)559-0388 3062 Ranchview Lane North. Plymouth, MN
More informationCollet Chuck manual 08/2010
Collet Chuck manual 08/2010 Contents: FNP manual collet chuck...4/5 draw-back type W20 / W25 / 5C / B32 / 386E FNP manual collet chuck...6/7 draw-back type B45 FNH manual collet chuck...8/9 draw-back
More informationPerformance Center revolvers, pistols, sporting rifles are the embodiment of old-world hand craftsmanship and modern technology.
64 Performance Center revolvers, pistols, sporting rifles are the embodiment of old-world hand craftsmanship and modern technology. The Performance Center offers sophisticated shooters limited run, uniquely
More information4000 Series Exit Devices Premier Product
4 4000 Series Exit Devices Premier Product Certification & Compliance: u ANSI/BHMA A56., Grade ANSI A7. Accessibility Code Underwriters Laboratories (UL and CUL) listed for accident hazard (panic) standard.
More informationThe Thompson Submachine Gun Model of 1919
ASAC_Vol102_01-Hill_100010.qxp 2/16/11 1:07 PM Page 2 The Thompson Submachine Gun Model of 1919 By Tracie L. Hill In 1916, the Auto-Ordnance Corporation was established to create a new automatic rifle
More informationROCK RIVER ARMS. All prices, configurations and specifications subject to change without notice.
JUNE 2004 ROCK RIVER ARMS Table of Contents RRA Custom 1911 Pistols, Parts & Customizing Services.............. Pages 3 / 6 RRA Custom Carbines & Rifles.................................... Pages 7 / 12
More informationThe illustrations in the document are for reference purposes only and may not depict actual products Page 1
23.4.2018 Page 1 2 1 6 3 8 4 Other Accessories 5 7 23.4.2018 Page 2 Index Code Item Compatibility/Description Additional information Page 1 200224 BARRELED RECEIVER RELATED PARTS 4 2 200225 BOLT RELATED
More informationMember Meeting Monday, March 26 th, 2018
Member Meeting Monday, March 26 th, 2018 Two Great European Firearm Mfgrs FN HERSTAL CZ Presented by Don Fraser FN Herstal History Located In Herstal, Belgium Near Liege Fabrique Nationale D herstal De
More informationMaintenance Information
16605958 Edition 2 May 2014 Air Percussive Rivet Buster Models 9001 and 11001 Maintenance Information Save These Instructions Product Safety Information WARNING Failure to observe the following warnings,
More informationM14 Rifle Item Stock Numbers
M14 Rifle Item Stock Numbers This document is derived from the 02/04/07 draft of the Third Edition of M14 Rifle History and Development by Lee Emerson copyright 2007. Permission is granted to reproduce
More informationColt 1851 Navy Revolver Manual
Colt 1851 Navy Revolver Manual If you are searching for a ebook Colt 1851 navy revolver manual in pdf form, then you've come to faithful site. We furnish full option of this book in PDF, epub, doc, txt,
More informationCTN U-TYPE DIE COLOR INDEX QTY 7/374 8/346 11/375 12/ /298 18/324 19/470 20/299 22/472 24/473 CTN U-TYPE DIE COLOR INDEX QTY
PAGE 2 PEEP HOLE STANDARD BARREL COPPER LUGS Allows inspection of the termination to assure complete cable insertion GL SERIES One-Hole 32000 GL 80 32002 GL 84 3999 GL 0 32004 GL 4 3200 GL 5 32003 GL 38
More informationThe CBJ Technology. 7.62x51 NATO.300 Blackout 6.5x25 CBJ Ball
The CBJ Technology 7.62x51 NATO.300 Blackout 6.5x25 CBJ Ball The CBJ Technology CBJ Tech AB has developed the 6.5x25 CBJ Cartridge, which utilizes subcaliber technology (tungsten core projectile inside
More informationDAN-INJECT Australasia
DAN-INJECT Australasia Dan-Inject Co2-Injection Rifles Item no: I.M. Description: CO2 Injection rifle (wooden stock model) mount with rifle barrel for high precision shooting, 16 bars manometer, cleaning
More informationRichmond County Gunsmithing - Services List and Pricing
Richmond County Gunsmithing - Services List and Pricing This is not a complete set of services provided. Please call for more info. All services require presentation of a valid and current government issued
More informationInventor Fred W. Watson. Jr. NOTICE
Serial No. 514.570 Filing Date 14 August 1995 Inventor Fred W. Watson. Jr. NOTICE The above identified patent application is available for licensing. Requests for information should be addressed to: 1
More informationObservations on the Composition of Breech Gunshot Residue from a.22 Pistol - By Bryan Burnett
Observations on the Composition of Breech Gunshot Residue from a.22 Pistol - By Bryan Burnett Most experts of GSR acknowledge that the metaliferous composition of GSR from one cartridge firing can be contaminated
More informationINDOOR & PARADE ACCESSORIES
Standard Ferrule Special Ferrule Spindle Where indicated below, our ornaments can be used with a ferrule or spindle. A ferrule is used for indoor use on wood poles and a spindle is used for outdoor use
More informationNew Zealand Ownership Marks for Small Arms Compiled by Phil Cregeen for NZ Arms Register May 2013
New Zealand Ownership Marks for Small Arms Compiled by Phil Cregeen for NZ Arms Register May 2013 Small arms owned by the New Zealand Government and issued to New Zealand Forces are typically marked NZ
More informationOne Direct Source for all your Water Blasting Parts and Accessories!
table of contents One Direct Source for all your Water Blasting Parts and Accessories! SURFACE NOZZLES PAGE Drilled Nozzles 1 Standard Button Tip Flex Lance Nozzles 1 TLX Nozzle 1 Drilled Nozzle Flow Charts
More informationMilitary & Law enforcement. professionally made in Finland
Military & Law enforcement Sound suppressors professionally made in Finland Effective accurate Compact Durable The suppressors excellent features and high quality are based on innovative suppressor design,
More informationOur goal is to make the install a breeze. Please read the entire guide before beginning.
www.airkewld.com Page 1 of 6 IRS Axle Kit Install IRS Axle Kit Install Our goal is to make the install a breeze. Please read the entire guide before beginning. KITS SHOULD INCLUDE 2 - Control-arm mounting
More informationThe Right Tool for Your Tough Job
SULLAIR air tools The Right Tool for Your Tough Job Applications Tool Sullair Model Class Weight cfm Horizontal and overhead applications Chipping Hammer MCH-2/3/4 15# 16-19 lbs 26-33 Industrial applications
More informationDual Pivot Caliper Brake
(English) DM-RACBR01-01 Dealer's Manual ROAD MTB Trekking City Touring/ Comfort Bike URBAN SPORT E-BIKE Dual Pivot Caliper Brake DURA-ACE ST-R9100 BR-R9100 BR-R9110 ULTEGRA ST-R8000 BR-R8000 BR-R8010 CONTENTS
More informationA new era of perfection
A new era of perfection THE BOLT ACTION RIFLE BLASER R8 Uncompromisingly tailored to active hunting! For the past 15 years there has been one lingering question about the R93. How can we top this? How
More informationTHE NEW WEAPONS OF WORLD WAR I ON LAND
THE NEW WEAPONS OF WORLD WAR I ON LAND The Great War saw the use of many new weapons. Some were available at the beginning of the war while others were invented during the war. The Great War was unlike
More information186A2 186A2DD N187-1 N187SD
Axle Kits For Paughco Springers 186A2 186A2DD Axle Kits For Paughco Wide Half-Round Springers These 3/4"-diameter axle kits are intended for use with Paughco s 181 Wide Springers (see pages 30 and ), and
More informationEd Brown Products, Inc Handgun Order Form
Listed below are our standard models. We offer many custom features, and can build a gun to your specifications. Please see the custom option list for popular options and pricing. If an option is not listed,
More informationThe Right Tool for Your Tough Job
The Right Tool for Your Tough Job Applications Tool Sullair Model Class Weight cfm Horizontal and overhead applications Chipping Hammer MCH-2/3/4 15# 16-19 lbs 26-33 Industrial applications MCH-3S/4S Cutting
More informationKelsey-Hayes Brake Pressure Differential Valve Rebuild
Home Kelsey-Hayes Brake Pressure Differential Valve Rebuild Sun, 05/30/2010-12:22pm SAH This document describes how to rebuild the D0OZ-2B257-C Kelsey-Hayes brake pressure differential valve by replacing
More informationEARLY YEARS DEVELOPMENT
MODEL 29 Smith & Wesson was known for quality double-action revolvers for many years prior to its N-Frame.44 Magnum, which became the Model 29. The gun that the powerful.44 was based on had been around
More informationELECTRICAL CONNECTORS B.1
ELECTRICAL CONNECTORS B. GENERAL The following table provides a brief description of the connectors found on your motorcycle. Connector numbers are listed in [brackets] in this manual. Table B-. Electrical
More informationBERETTA TIKKA. Beretta T3 Lite 308 Win TIKKA T3 LITE BL/SYN 308
Contents Page # 3 - Beretta Tikka 3 Light 4 Beretta Tomcat 32 Cal. 5 H&R Handi Rifle 6 Henry Repeating Arms Standard Lever 22LR 7 - Henry Repeating Arms Large Loop Lever Action 22 LR 8 Marlin 243 Bolt
More informationGRADES OF L.C. SMITH SHOTGUNS
GRADES OF L.C. SMITH SHOTGUNS 1900 LC Smith Catalog Hunter Arms Company, Fulton, New York Pre-1913 Grades The Hunter Arms Company continued the use of the term "Quality" as the prefix to describe the various
More informationDouble-row ball bearings
Double-row ball bearings Radial double-row ball bearings 262 Definition and capabilities 262 Series 262 Tolerances and clearances 262 Design criteria 263 Suffixes 263 Characteristics 264 Radial double-row
More informationcontents dealer Workbook
208 dealer Workbook 873 LEVER ACTION COMPETITION RIFLE (See page 3) contents 2 Uberti History, Warranty 2 Core Products Round-Up 6 Walker 7 848 Dragoon 7 849 Pocket 8 85 Navy, 860 Army 8 Buffalo Bill Centennial
More informationEnglish 1/2015. The Profi le System
English 1/2015 The Profi le System MayTec System Technology The key to success! Solutions with Innovative Profi le The Profi le System Curved Profi les The Clean-Room System The Telescopic System The Linear
More information1911 CUSTOMIZATION PRICE LIST
1911 CUSTOMIZATION PRICE LIST Pricing effective August 1, 2017 NOTES ON CUSTOM WORK Colt will perform work on 1911 pistols that were manufactured by Colt only. Colt will not perform work on firearms that
More information2014 PRODUCT CATALOG DPMS GII DESIGNED II DOMINATE
2014 PRODUCT CATALOG DPMS GII DESIGNED II DOMINATE THE FUTURE OF THE MSR HAS BEEN REDEFINED. DPMS GII HAS ARRIVED. THE LIGHTEST, MOST RELIABLE, TECHNICALLY ADVANCED.308 MSR. DESIGNED II DOMINATE. DPMS
More informationBlaser News. Dear Valued Business Partners,
29.01.2019 Blaser News Dear Valued Business Partners, The countdown is on! The Jagd & Hund 2019 will soon open its doors. This represents the perfect opportunity for us to display our new products 2019.
More informationI.P.S.C. World Champion.
Sport Handguns Catalogue for Australia 2009/10 WWW.TANFOGLIO.COM.AU I.P.S.C. World Champion Since 1999 1 Gold Custom Eric 2007 This fully worked IPSC race gun has been designed by four time World Champion
More informationML15. mm х170х70 kg 2,9...3,5. Beech. 5.5mm mm mm mm.25. 9mm bar 260 см 3 compressed air bolt action stock
www.ataman-guns.com ML15 New product mm 1010-1100х170х70 kg 2,9...3,5 4.5mm.177 5.5mm.22 6.35mm.25 7.62mm.30 9mm.35 300 bar 260 см 3 compressed air bolt action stock Beech www.ataman-guns.com mm 710-800х213х72
More informationThe Right Tool for Your Tough Job
SULLAIR air tools The Right Tool for Your Tough Job Applications Tool Sullair Model Class Weight cfm Horizontal and overhead applications Chipping Hammer MCH-2/3/4 15# 16-19 lbs 26-33 Industrial applications
More informationRemington Domestic Sporting SHOTGUNS - Brokovnice
Remington Domestic Sporting SHOTGUNS - Brokovnice MODEL SP-10 AUTOLOADING SHOTGUNS 24808 SP-10 Magnum Satin 10 30" VT Rem Choke 54 483 Kč 24828 SP-10 Magnum (Fully uflaged w/mossy Oak Obsession ) 10 26"
More informationAbout the Small Arms Survey
About the Small Arms Survey The Small Arms Survey is a global centre of excellence whose mandate is to generate evidencebased, impartial, and policy-relevant knowledge on all aspects of small arms and
More informationBMD 2, BMP3 and BMD3.
WARSAW PACT USSR T-90. Is it a T-80U or a T-90? I elected to call the T-90 (originally a slightly upgraded T-80 that was going to be called the T-72BU) the first upgrade and the T-90A as the improved model.
More informationFittings & Accessories
Fittings & Accessories 176 AKRON BRASS COMPANY PH. 800.228.1161 (330.264.5678) FAX 800.531.7335 (330.264.2944) www.akronbrass.com 630 Angle Elbow SWIVEL FEMALE x MALE 2 1 2" & 3" sizes in 30 (64 & 76 mm)
More informationM14 Rifle Blueprints Sdocuments2
M14 Rifle Blueprints Sdocuments2 1 / 6 2 / 6 3 / 6 M14 Rifle Blueprints Sdocuments2 Blueprints and Specifications for the M14 7.62mm Service Rifle (Blueprints dating from 1954 with revisions through the
More informationCOMPONENT DIAGRAM : LMG ENHANCED
KA002-05U KA002-06U KA002-02U KA002-37U KA002-37U KA002-33U KA002-10U KA002-30U KA002-36U KA002-54U KA002-55U KA002-03U KA002-46U KA002-28U KA002-27U KA002-17U KA002-32A KA002-29A KA012-01U KA012-02U KA012-03U
More informationFifth Wheel, Fontaine H5092 Series 31.07
General Information General Information Fontaine H509 series fifth wheels couple to trailers having a standard -inch kingpin. When installed as a stationary mount, the fifth wheel is bracketmounted to
More informationMultimar. Universal Gage 844 T for external and internal dimensions
- 10-4 Multimar. Universal Gage 844 T for external and internal dimensions The Universal Gage Multimar 844 T. Easy to use and versatile; ideal for all your measuring requirements in dimensional metrology.
More informationMechanical Door Locks 2OO 3OO 4OO
Mechanical Door Locks 2OO 3OO 4OO United Kingdom CL200 Surface Deadbolt SS $125.00 PB $135.00 CL200K Surface Deadbolt with Key Override SS $135.00 PB $155.00 CL210 Tubular Deadbolt SS $125.00 PB/FB $135.00
More informationFORD 6R80 UPDATES Presented by: David Chalker ATRA Technical Advisor 6R80
FORD UPDATES Presented by: David Chalker ATRA Technical Advisor Welcome To Today s Presentation Sponsored By: Any Questions Or Comments Please Send Emails To webinars@atra.com Any Questions That You
More informationWALTHER TABELA DE PREÇOS JDNA Unipessoal, Lda. Index. Printed Products Walther / Hämmerli 3
JDNA Unipessoal, Lda WALTHER TABELA DE PREÇOS 2018 Index Printed Products Walther / Hämmerli 3 4.5 mm Match Air Pistols and Accessories Walther / Hämmerli 4-7 4.5 mm Match Air Rifles and Accessories Walther
More informationParts List PL_TR-TO-10_0714
Torque Transfer Solutions TR-TO-10 Series 10-Speed Twin Counter Shaft Manual Transmission Parts List PL_TR-TO-10_0714 14700 Helm Ct. Plymouth, MI 48170 U.S.A. (800) 401-9866 www.tremec.com Copyright 2014
More informationWEAPONS. M3 Fighting Knife & M6 Scabbard. M1 Garand. Screaming Eagles Living History Group
WEAPONS M3 Fighting Knife & M6 Scabbard The M3 fighting knife was originally issued in March 1943 and designed primarily for use by elite troops such as airborne and Army Rangers. The M3 was initially
More informationManual Welding Accessories
Manual Welding Accessories SHORTSTUBS TM promote higher productivity, less waste, less cost and less inventory. Designed for easy installation of electrodes and built to last with a high impact, high heat,
More informationThe Whiskey-3 rifle stocks at DOLPHIN GUN COMPANY. PRICED FROM
The Whiskey-3 rifle stocks at DOLPHIN GUN COMPANY. PRICED FROM 898.00. The Whiskey-3 rifle stock DETAILED DESCRIPTION - Call ~ 01507 343898 or 0774 7771962 The Whiskey-3 Chassis (W3C) (Generation V Chassis)
More informationTOOLS TO FIRE YOUR EMOTION! V4951 Ratcheting open-end wrench set. V Socket set. Closed solid steel ratchet V4944
TOOLS TO FIRE YOUR EMOTION! 2017-05-01 2017-08-1 V4951 Ratcheting open-end wrench set Hot Innovation! Closed solid steel ratchet V241 7 8 Socket set Hot Price! V4944 V494 HOT17-1/EN/NO/9 7 Valid until:
More informationCZ 75 Ref Weight: 940 grams Length: 210 mm Pipelength: 110 mm Velocity: 95(312) m/s (fps) Capacity: 22 rounds Energy: 0,9 Joule
In stock CZ 75 Ref. 16319 Weight: 940 grams Length: 210 mm Pipelength: 110 mm Velocity: 95(312) m/s (fps) Capacity: 22 rounds Energy: 0,9 Joule Extra Mag Ref. 16540 End CZ99 Ref. 16530 Weight: 940 grams
More informationTC range and accessories
Modular clamping equipment Tt pag. T range and accessories Tg. 6 pag.. 7 Tt-X pag.. 8 S-Tt pag.. 9 xtension element Tt pag.. 1 omplete extension element Tt pag.. 18 Accessories T pag.. 13 ase with fixed
More informationIntroduction: Problem statement
Introduction: Problem statement The goal of this project is to develop a catapult system that can be used to throw a squash ball the farthest distance and to be able to have some degree of accuracy with
More informationGLOBAL DRILLING SOLUTIONS, INC STOCK LIST
GLOBAL DRILLING SOLUTIONS, INC STOCK LIST Item Description Qty in Stock Lighting Equipment LED Flood Light. IECEX Certificed. Explosion proof / Zone & ; Ex d IIB T Gb; IP. / Rated voltage: 00 00VAC, 0/0Hz.
More informationIso-Flo Coupling Repair
Instruction Sheet P/N 229782C Iso-Flo Coupling Repair Introduction This instruction sheet covers the repair of the male and female couplings used in the Automatic and Manual Iso-Flo HD Voltage Block Systems,
More informationDrive End Bracket & Bearing. Drive End Bracket. Tandem Axle # #865733
Drive End Bracket & Bearing #865089 1 06409700 1" Lock Collar 2 865733 Drive Bracket w/ Bearing 3 310037 End Drive Shaft Drive End Bracket #865733 1 03003100 Bearing 1" w/snap Ring 2 957795 Drive End Bracket
More information