DURATAPE TM SB INDOOR

Transcription

1 PROJET MOEL(S) TYPE URTPE TM SB Standard spacing SB Tapelight Energy Efficient LE flexible linear light strip for continuous consistent color in linear applications. Extremely flexible and adjustable lengths for varied architectural applications. Static Indoor Key eatures Energy efficient LE flexible linear light strip for continuous consistant color in linear applications Ideal for IP20 interior or IP65 (with optional sleeve) location applications such as cove, undercounter/cabinet, and lighting accents Sold per foot and manufactured to specified lengths with factory attached end preps ll uratape features 2circuit substrate for optimum heat dissipation, minimizing voltage drop while increasing run lengths per power feed, standardizing electrical flow over entire length of the strip for maximum product reliability ll uratape features double sided solder points for maximum conductivity and durability Preassembled to specific lengths with various connector options for project requirements and efficient power configuration Max continuous length: up to 22 per run Multiple dimming options available imensional rawings 0.66" O.. IP20 Indoor LE ata 13/ " IP65 amp Wattage Viewing ngle Lifespan at 90% drive 0.08W per LE ,000hrs * LEs operating at 90% of LE manufacturers maximum current rating. 0.40" 13/32 13/ " etails Spacing 0.66 O LE Spacing LEs 18 LEs per foot olor Temp vailable in 2200 K, 2400 K, 2700 K, 3000 K and 3500 K dvanced LE binning with / 2step Macdams ellipse End Preps actory prepped end preps available (See Page 2) ield uts See page 2 for cut zones Mounting Includes installationready 3M tape adhesive for simplified installation directly to mounting channel or application surface Lens Options Installation Power Supply Listing ompliance Warranty ixture ata Model Efficacy* Lm/Wt Lm/t Wt/t Wt/LE Indoor 3000 K LE color Standard 3.0W/ft 60.00* * Meets Title 24 High efficacy rating. Optional lens covers with choice of clear, frosted 10% for indirect use, frosted 30% for direct view or frosted 60% for full diffusion Optional mounting channels and clips, protective lens covers, thermal channels and heat transfer tape for optimal maintainance. ield trimmable every 4 Listed lass II 24 V power supply required culus / E listed ROHS compliant 3 year warranty Ordering uide pe ion Static PV sleeve Indoor. With option PV sleeve MOEL uratape INTENSITY SB = Standard Spacing WTTE 30 = 3.0 W/ft IP RTIN I = Indoor IP20 =amp IP65 Sleeve LE OLOR 22 = 2200 K 24 = 2400 K 27 = 2700 K 30 = 3000 K 35 = 3500 K OPTIONS VOLTE L SB 24 S = Standard RI H = High RI 24 = 24 V SEE PE 4 OR POWER SUPPLIES Page 1 of 8

2 URTPE TM SB Wiring Options 24 dditional lead wire using the new lead 24 wire dditional lockable 24 dditional lead wire interconnect 24 dditional using the new lead wire using the new lead wire lead lead wire lockable wire using lead interconnect the new lockable interconnect 24 wiredditional lockable lead interconnect wire using the new lead wire lockable interconnect 24 dditional lead wire lead wire using lockable interc B E Single lead wire prep. 24 Lead wire/dead end allows for connection to power at lead end and field trim of uratape product at the other end. B 07UI1BL1 mp uratape Static Indoor H 07UI1BL2 5/16 ouble ended lead wire prep. 24 lead O.. wire at both ends. One end can be used for power H connectivity while the other end can Hbe used for a jumper cable to run to an additional length of uratape. aution: Pay attention to max run lengths and voltage drops from total lead/jumper wire 07UI1JMPBLXX Jumper cable (specified length) Jumper cables can be factory attached to uratape to meet your specified installation requirements. Jumper lengths available as 1, 2, 3, 4, 6, 12. dd length number to end of part number. aution: Pay attention to max run lengths and voltage 5/16 5/16 drops from total lead/jumper wire O.. O.. H 24 dditional lead wire lead wire using the new lockable interconnect uralamp uratape Static Indoor 07UI1BL 12 dditional lead wire 13/32 Purchased per foot and factory attached to specified run leads. Lead wire can be field cut to desired length. IP20 Indoor E 07UI1ON dditional connectors. Lead wire connectors 2/ea per connection. 07UI1LION Removable/lockable interconnect lead wire. 24 lead wire with locking and unlocking lead connector. H LESOLI1 uratape segment. Wire fold 1 18ga 13/32 13/32 wire factory attached between specified lengths of segments (4 intervals only). IP65 amp ield ut etails uratape can be field cut to accomodate most installations, by cutting at the indicated field cut sections. aution! ield cutting should only be done before connection power. lamp uratape Static Indoor. With uralamp option PV uratape sleeve Static Indoor. With option PV sleeve 0.08" 4" uratape features solder points for maximum continuity for long lifespan. 0.16" Page 2 of 8

3 Mounting ccessories URTPE TM SB LE20 Silicone end cap for termination of IP20 tape. LE65 Silicone end cap for termination of IP65 tape. LSLEEVELP65 Sleeve mounting clips. Package of 10 each for 5 ft section. LLUMU6 Low profile aluminum Uhannel for linear run lengths, available in 6 1/2 I, 5/8 O, 1/4 H LLUML6 Low profile aluminum 1/2 x 1/2 Lhannel for linear run uratape can be mounted at either 0º or 90º mounting positions. vailable in 6 L1LI uratape lockable interconnect. an be unlocked for easy replacement or maintenance. L1LI90 uratape 90º lockable interconnect. an be unlocked for easy replacement or maintenance. LSBOLI1 Wire fold 1 18ga wire factory attached between specified lengths of segments (in 4 intervals). or curved applications that require lateral bends for upward illumination. LSBOLIX Specified lengths of 18ga wire fold. L1LIOL1 uratape lockable interconnect with flexible 1 18ga wire fold. L1LIOLX uratape lockable interconnect with flexible (specified lengths) 18ga wire fold. LHTTPE 1/2 wide thermally conductive mounting tape. actory attached and sold per foot. LHSTPE 2 wide aluminum foil tape, used to create a flexible thermal sink. Sold in 100 rolls. LI45MH4 45 mounting base, sold in 4 foot Used with uratape (no PV sleeve) for 45 mounted linear applications. LI45VR4 (lear) LI45VR4/10/30/60 (rosted) 45 mounting base cover, sold in 4 foot LI2P (lear) LI2P10/30/60 (rosted) Twopiece mounting tube; base (clear) with cover, sold in 4 foot Used with uratape (no PV sleeve) for linear applications. lear or frosted at 3 diffusion levels, 10%, 30% or 60% LIMHN4 Mounting channel, sold in 4 foot an be used with uratape (no PV sleeve) and outdoor uratape (with PV sleeve) for linear applications PRPLEX4 lexible tubing, sold in 4 foot an be used with uratape (no PV sleeve) for vertically curved applications Page 3 of 8

4 URTPE TM SB Profiles PRE luminum channel with dual opal lens for dual tape 6 runs illuminating in opposite directions. PREEK Set of two end caps PRSP luminum channel with curved opal lens for dual tape 6 runs for unique lighting effects. PRSPEK Set of two end caps PRSN luminum channel with curved opal lens for 45º angled dual tape 6 run illumination. PRSNEK Set of two end caps Page 4 of 8

5 URTPE TM SB Profiles PRP20 Surface mount aluminum channel. nodized aluminum rigid profile complete with white diffuser plastic cover. Suitable for IP65 and IP66 installation applications. vailable in 6 LLHN20LENS rosted lens, available in 6 LLHN20E1 End cap with hole for interconnectivity. LLHN20E2 End cap with no hole for run length termination. LLHWOI Mounting clip for indoor aluminum channel. PRIN20 lush mount aluminum channel. nodized aluminum rigid profile complete with white diffuser plastic cover for flush mounting. Suitable for IP65 and IP66 installation applications. vailable in 6 LLHN20LENS rosted lens, available in 6 LLHN20E1 End cap with hole for interconnectivity. LLHN20E2 End cap with no hole for run length termination. LLHWOI Mounting clip for indoor aluminum channel. PRN20 45º aluminum channel. nodized aluminum rigid profile complete with white diffuser plastic cover for flush mounting. Suitable for IP65 and IP66 installation applications. vailable in 6 LLHN20LENS rosted lens, available in 6 LLHN2045E1 45º end cap with hole for interconnectivity. LLHN2045E2 45º end cap with no hole for run length termination. LLH45I Mounting clip for indoor aluminum channel. PRINT Recessed aluminum channel for walkover inground applications, includes frosted polycarbonate cover. Suitable for IP65 and IP66 installation applications. vailable in 6 LLHNWOE1 End cap with hole for interconnectivity. LLHNWOE2 End cap with no hole for run length termination. LLHWO Mounting clip for indoor aluminum channel PRIN luminum profilefor installation flush in plasterboard. omplete with white lens. vailable in Page 5 of 8

6 URPROILE PLUS LUMINIUM OUBLE EMISSION PROILE * ode escription L URTPE TM SB Barcode new PRESO ouble emission aluminium profile new PRESOSL Rear support for surface mount new PRESOL ront screen in flat opal polycarbonate plate new PRESOLR ouple of opal polycarbonate rear screen new KTPRESOL Set of two side caps flat screen new uraprofile KTPRESO Plus Suspension luminum kit ouble Emission Profile * vailable Linear architectural upon request. profile configurable in direct, indirect emission or both, for high levels of light emission The direct emission is configurable with the use of 1 to 4 uratape strips; Indirect emission uses two strips Mounting: On ceiling for unidirectional or suspended for unidirectional or double emission (direct & indirect) Manufactured according to specification, with lens (flat front and rear pair of lens for indirect emisison), side closure caps and suspension kit Rear support required for ceiling mounting, code PRESOSL Profile features internal compartment suitable for integral power supply and dimming module (onsult actory) Possibility of on/off switching and dimming separate for direct and indirect lighting PRESO ouble emission aluminum channel. SUSPENE vailable MOUNTIN in 6 WITH TWO STRIPS PRESOSL OR INIRET LIHTIN Rear support N 4 OR for IRET surface LIHT mount. vailable in 6 KTPRESO Suspension kit. PRESOL ront lens in flat opal polycarbonate EILIN plate. MOUNTIN vailable in 6 WITH 4 STRIPS PRESOLR OR IRET LIHT ouple of opal polycarbonate rear lens. vailable in 6 EILIN MOUNTIN WITH 3 STRIPS OR IRET LIHT O LIHT OR ENERL LIHTIN KTPRESOL Set of two caps flat lens Page 6 of 8

7 URTPE TM SB Power Supplies at No Type Voltage Wattage Listing imensions immable ELI Electronic 90305V / 24V 96W / 1X4** culus 10 W X 10 L 4 * No ELI V / 24V 192W / 2X4** culus 10 W X 10 L 4 * ELI V / 24V 288W / 3x4** culus 10 W X 10 L 4 * EL V / 24V 96W / 1X4** UL/E 2.67 W X 9.66 L 1.53 M Magnetic 120V / 24V 40W / 1X1.6** cetlus 2.00 W X 5.06 L 2.14 Yes M V / 24V 60W / 1X2.4** cetlus 2.25 W X 6.55 L 2.55 Triac/MLV M V / 24V 96W / 1X4** cetlus 3.00 W X 9.80 L 3.00 M V / 24V 192W / 2X4** cetlus 3.00 W X 9.80 L 3.00 * imensions include enclosure with mounting bracket ** 4 maximum current protection for each seconday circuit *** onstant voltage drivers 50HZ, voltage regulated with short circuit protection. operating temperature Electronic rivers or use with 010V interface (L110) for secondary side dimming control. enerally used for programmable dimming levels for changing scenarios. Magnetic Transformers or use with primary side dimming with an MLV forward phase dimming system (supplied by others). enerally used for a preset dimming level. Electronic river Electronic river in Enclosure Magnetic Transformer Electronic river Power Supply Magnetic Power Transformer Supply Line Voltage Input Line Voltage Input UL listed Jbox by others Wiring from transformer to Jbox must be to lass II standard. Refer to NE and local code requirements. UL listed Jbox by others Wiring from transformer to Jbox must be to lass II standard. Refer to NE and local code requirements. uratape uratape Page 7 of 8

8 t 24V Input t 24V Input 010V Input 24V Input 010V Input t 24V Input 010V Input 24V Input URTPE TM SB immers at No Type Voltage Max Load imensions M600 Magnetic 120V/120V 450W Single ang Box Recessed M600H 277V/277V 450W Single ang Box Recessed M V/120V 800W ual ang Box Recessed M1000H 277V/277V 800W ual ang Box Recessed L110 Electronic SEL V: 1024V 96W 1.5 W X 7 L X 0.75 ontrol: 010V (< 0.6 m) Single ang immer L110 imming Module System Layout Example iagram positive negative positive negative positive negative Positive Negative Standard immable Power Supplies ELI ELI ELI V V N L Hot Neutral round Integral imming (010V) Power Supplies ELI ELI ELI Osram IM Osram IM Osram IM IM IM OT 1 OT OT 2 1 OT 2 OT 3 OT Page 8 of 8