NULB-8 Series silk sbc led lightbar 24V LED Light Bar Source: 5W / 350Lumen / 90+CRI per ft

Transcription

1 PRODUCT DESCRIPTION Nora Lighting s Silk SBC LED is a 24V interlock LED strip. Its low-profile, Title 24 compliant fixtures provide excellent and even illumination on all surfaces. Producing over 90+CRI and 350 lumens per foot at only 5 Watts per foot, SILK SBC LIGHTBAR is one of the most energy efficient products in the market. Silk SBC features a special lens that does not show diode image and new Solid Bus Connectors for rigid joining of connectors. Combined with an ultra low-profile housing, five fixture lengths, an assortment of interconnector cables and mounting brackets that install at a variety of angles, Nora s offers an unprecedented level of contractor friendly installation accessories. LED technology eliminates forward heat from the fixture, also no UV or infrared rays to harm artwork or heat sensitive foods. Features No Diode Image Available in 2700K, 3000K & 4000K CCT Available in five different lengths; 6", 12", 24", 36" and 48" Easy installation with flush amount Flush end connectors (included with each bar) Dimmable with dimmable power supply NULB-8 and Class II Drivers are rated for -25ºC operation 30,000 hours of rated lamp life Housing Solid aluminum extrusion with flush mounted end caps finishes Natural Aluminum, Black (Only as Special Order) ELECTRICAL Voltage: 24V DC Power Consumption: 5 Watts per foot Lumens: 6"= 2.4W, 24V, 90+CRI, 175lm 12"= 4.8W, 24V, 90+CRI, 350lm 24"= 9.6W, 24V, 90+CRI, 700lm 36"= 14.2W, 24V, 90+CRI, 1050lm 48"= 19.0W, 24V, 90+CRI, 1400lm Driver: A wide variety of drivers are available for direct plug-ins, Class II,Switchex Hardwire Dimmable Class II drivers up to 300 Watts. Color Rendering Index: 90+ CRI Light Source: 48 LEDs per foot Operating Temp: -13ºF to 140ºF (-25ºC to 60ºC) Life Expectancy: 30,000 Hours Max Run Length: 20' at power-rating 96W max for 4A max single circuit 3 YEAR LIMITED Color Temp: Warm White (2700K), Warm White (3000K), Cool White (4000K) SILK SBC Cat No. Length Light Source Color Temp finish NULB-8 6 = 6" LED9 27 = 2700K A = Natural Aluminum 12 = 12" 30 = 3000K Black = (Special Order Only) 24 = 24" 40 = 4000K 36 = 36" 48 = 48" Example: NULB-824LED930A - 24", 3000K Aluminum Silk R 8 PRODUCT Images and dimensions D M 7 YEAR 1 YEAR LIMITED LIMITED R Gayhart St., Commerce, CA Phone: APPROVED FAX: nora@noralighting.com T24 JA8 Length: 6"= 5-15/16", 12" = 11-14/16", 24" = 23-9/16", 36" = ", 47" = 46-15/16" Width: 3/4 Height: 1/2" 2015 NEW! 3 YEAR LIMITED ACCESSORIES INCLUDED NEW! ASSEMBLED IN USA 2 PCS. 0º-90º mounting clips NAL-809 ADJ. 3 PCS. 0º-90º mounting clips NAL º IP64 IP65 CEC APPROVED CCEA TRUE WHITE CRI 2013 T24 JA8 Labels and Warranty culus Listed for Dry Location RoHS 2008 cetlus Listed for Dry Location California Energy Commission & Energy Star Pending ADAPTOR 700 Title 24 Compliant QUICK 5 Year Warranty X JQ JACK 850 CCEA 30º BEAM 20W 50W 150W MAX COMMITTED TO GREEN WET COMMITTED TO GREEN AIR TIGHT COMFORT DIM 24V 12V DIMMABLE TO 10% (VARIES BY DIMMER) 5 YEAR LIMITED CEC APPROVED 1/2" X D M TRUE WHITE 3/4" NULB-806, NULB-812, NULB-824 NULB-836, NULB PC. end to end connector NAL-8005 YEAR LIMITED 1 PC. end to end connector NAL-800 DAMP IP44 2 PCS. Flat mounting clips NAL PCS. Flat mounting clips NAL-801

2 2" Flex SBC Interconnection Cable NAL-802W 2" NAL-806W 6" NAL-812W 12" NAL-824W 24" NAL-872W 72" Silk SBC Flat Mounting Clip NAL-801 A set are included with every SILK SBC. Silk SBC 0-90º Low Profile Mounting Clip NAL-809 A set are included with every SILK SBC. SILK SBC Angled Mounting Clip NAL º Angled Mounting Clip LED SILK LIGHTBAR. SILK SBC Adjustable Mounting Clip NAL-880 2PC 0-180º+ Adjustable Mounting Clip Power Line Cable with RCA Jack NAL-808/24W 24" NAL-808/72W 72" Power Line Cable with RCA Jack SBC Power Line Cable with Terminal Block NAL-812TBW 12" NAL-872TBW 72" SBC Power Line Cable Interconnector with Terminal Block SBC Side Power Line Cable NAL-807W 12" NAL-807/72W 72" SBC Side Power Line Cable. SBC Power Line Cable Open Wire NAL-810/12W 12" NAL-810/72W 72" SBC Power Line Cable Open Wire. SBC Side Power Line Cable Open Wire NAL-811/12W 12" NAL-811/72W 72" SBC Side Power Line Cable Open Wire. In-Line Dimmer NATL V & 24V, 72W Max No power fail memory, touch on/off and hold to dim. In-Line Motion Sensor NAL-830 2" Interconnection Cable 12' maximum activation distance; 20 seconds auto off; 120º detection zone; Max load 4A

3 In-Line Touch Dimmer Control NAL-855 Tap "On" for 100%, tap again for 75%, again for 50%, again for 25%, and again for "Off." No Power failure memory. Interlink SBC Solid Bus Connector for SILK NAL-800 End to End transition. One is included with every Silk lightbar. DC Plug & Play Motion Sensor NAL-856W 12' Max activation distance; 20 second auto off; 120 detection zone; Max Load 4A. Compatible with Nora LED Tape Light, LED and LED Puck. 24V Class II Hardwire Plugs LED Driver NATL-530HW 30W NATL-560HW 60W Hardwired LED Driver allows for driver to be hardwired with NUSP-JBox (required). The power line connector is 3-1/4" long and the input wire is 4" long. Can be converted into plug-in driver with NRA-6035W/6 or NRA- 6035W/10. 24V Class II Hardwire LED Driver NATL-5100HW 100W Includes Hardware Box & 10' power line connector (NALTL-10). Non-dimmable Nora SWITCHEX 24V 100W Dimmer+Driver Switch NATL-SWEX100/24 100W The SWITCHEX Dimmer + Driver accepts 120 VAC and converts it to low voltage DC, all within a standard electrical box. Dimmable Class II Hardwire Magnetic Driver NMTD-60/24D 24V 60W NMTD-90/24D 24V 90W 120VAC-277VAC/24VDC 60/96 Watt Class II fused constant voltage Magnetic remote transformer. 24V Direct Plug-In Driver NATL V, 24W NATL V, 45W Allows direct connection to a wall outlet with 6' cord and plug. Requires power line interconnection cable. Non-Dimmable. 24V Direct Plug-In LED Driver NATL V Allows direct connection to a wall outlet with 5' cord and 44" power line connector. Requires power line interconnection cable. Non-Dimmable. In-Wall Rated Wire NATL-W ' NATL-W ' 16 AWG low voltage Class II two-conductor, in-wall rated wire. Replacement Power Line Connector NALTL-10 10' 24V NALTL-30 30' 24V For use with NMT Series and NATL- 5100HW. Replaces included 10' lead wire, to allow for 30' or less length between PLUS run and LED Driver. Low Voltage Splice Box NATL-415 Use to join Romex low voltage lead or NATL-W16-2 Nora In-Wall Rated wire to power line connector.

4 Flexible Extension Cord for NATL-530HW or NATL-560HW NRA-125/6 6" NRA-125/12 12" NRA-125/18 18" NRA-125/72 72" Cord & Plug for NATL-530HW or NATL-560HW NRA-6035W/6 6' NRA-6035W/10 10' Used to convert NATL-530HW or NATL- 560HW into a direct plug-in driver. Junction Box for Hardwiring NUSP-JBox Required for hardwiring NATL-530HW or NATL-560HW. Can be used to feed to separate runs. Accepts Romex.

5 SILK Wiring Diagram INPU T: DC + + AC 60W POWER 24V AC V/50-60H z W Max INPU T: DC + + AC 96W POWER 24V AC V/50-60H z W Max Pleas e make sure that the total power of the run does not exceed the rating of the drive r SILK Sample Layout