TEST REPORT SHENZHEN LIANHEYIDA ELECTRONIC TECHNOLOGY CO.,LTD

Transcription

1 Report o.: BST Y-1SR-2 SHEZHE LIAHEYIDA ELECTROIC TECHOLOGY CO.,LTD TEST REORT repared For : SHEZHE LIAHEYIDA ELECTROIC TECHOLOGY CO.,LTD 4F,Building A,YouXinDa Industrial Area, GenYu Road,TianLiao Village,GongMing Town,GuangMing ew Area,ShenZhen City roduct ame: SOCKETS VERTICAL Model : T3U2, T2U2, T4U2, T5U2, D2U4, D3U4, D4U4, D5U4 repared By : Shenzhen BST Technology Co., Ltd. Building o.23-24, Zhiheng Industrial ark, Guankouer Road, antou,anshan District,Shenzhen,Guangdong,China Test Date: Sep. 15, 2014 Sep. 25, 2014 Date of Report : Sep. 26, 2014 Report o.: BST Y-1SR-2 Add:Building o.23-24,zhiheng Industrial ark,guankouer Road,antou,anshan District,Shenzhen,Guangdong,China age 1 of 25

2 Report o.: BST Y-1SR-2 TEST REORT IEC lugs and socket-outlets for household and similar purposes art 2: articular requirements for adaptors Testing laboratory ame...: Address...: Testing location...: Applicant...: Address... : Shenzhen BST Technology Co.,Ltd. Building o.23-24, Zhiheng Industrial ark, Guankouer Road, antou,anshan District,Shenzhen,Guangdong,China Shenzhen BST Technology Co.,Ltd. SHEZHE LIAHEYIDA ELECTROIC TECHOLOGY CO.,LTD 4F,Building A,YouXinDa Industrial Area, GenYu Road,TianLiao Village,GongMing Town,GuangMing ew Area,ShenZhen City Test specification Standard... : Test procedure... : rocedure deviation... : on-standard test method... : Test item Description... : Trademark... : Model and/or type reference... : Manufacturer... : Address... : IEC :2013, IEC :1995 Compliance with IEC :2013, IEC :1995.A..A. SOCKETS VERTICAL.A. T3U2, T2U2, T4U2, T5U2, D2U4, D3U4, D4U4, D5U4 SHEZHE LIAHEYIDA ELECTROIC TECHOLOGY CO.,LTD 4F,Building A,YouXinDa Industrial Area, GenYu Road,TianLiao Village,GongMing Town,GuangMing ew Area,ShenZhen City Rating(s).: AC V, 50/60Hz, 10-16A, W Test case verdicts Test case does not apply to the test object... : Test item does meet the requirement... : Test item does not meet the requirement... : (.A.) (ass) F(ail) Add:Building o.23-24,zhiheng Industrial ark,guankouer Road,antou,anshan District,Shenzhen,Guangdong,China age 2 of 25

3 Report o.: BST Y-1SR-2 General remarks "This report is not valid as a CB Test Report unless appended to a CB Test Certificate issued by a CB, in accordance with IECEE 02". This test report shall not be reproduced except in full without the written approval of the testing laboratory. The test results presented in this report relate only to the item tested. "(see remark #)" refers to a remark appended to the report. "(see appended table)" refers to a table appended to the report. ote: The series products have the same circuit diagram, CB layout and functionality. The differences are the model name, so, we select T3U2 to test. Copy of marking plate roduct: SOCKETS VERTICAL Rated: AC V, 50/60Hz, 10-16A, W Model: T3U2 SHEZHE LIAHEYIDA ELECTROIC TECHOLOGY CO.,LTD repared by : Engineer Reviewer : Supervisor Approved & Authorized Signer : Christina / Manager Add:Building o.23-24,zhiheng Industrial ark,guankouer Road,antou,anshan District,Shenzhen,Guangdong,China age 3 of 25

4 Report o.: BST Y-1SR-2 IEC Clause Requirement Test Result - Remark Verdict 4 GEERAL REQUIREMET --- Accessories and surface-type mounting boxes shall be so designed and constructed so that in normal use their performance is reliable and without danger to the user or the surroundings within the meaning of this standard Compliance is checked by meeting all the relevant requirements and tests specified All the relevant tests are carried out 5 GEERAL OTES O TESTS Tests according to this standard are type tests or routine tests 5.2 Unless otherwise specified, the specimens are tests as delivered and under normal conditions of use 5.3 The tests are carried out in the order of the clauses Tested at an ambient temperature between 15 and Three specimens are subjected to all the relevant tests 5.5 The specimens are submitted to all the relevant tests and the requirements are satisfied if all the tests are met Type tests 5.6 Routine tests are specified in annex A 6 RATIGS Accessories should preferably be of a type and preferably have a voltage and current rating as shown in table In a cord extension set, the rated current of the portable socket-outlet shall not be higher and the rated voltage shall not be less than that of the plug 6.3 Accessories should have a degree of protection I20, I40, I44, I54 or I55 Rated voltage: V, rated current: 10-16A I20 Add:Building o.23-24,zhiheng Industrial ark,guankouer Road,antou,anshan District,Shenzhen,Guangdong,China age 4 of 25

5 Report o.: BST Y-1SR-2 IEC Clause Requirement Test Result - Remark Verdict The rated voltage of adaptors shall not be lower than that of the relevant socket-outlet which can the adaptor The rated current of an adaptor shall be: -- the rated current of the plug portion of the adaptor -- the sum of the rated currents of the plugs which can be inserted into the adaptor Fused adaptor shall have a minimum rating equivalent to the rating of the fuse fitted in accordance with the marking The rated current of each of the socket-outlet portions of the adaptors shall be equal to or greater than the maximum value of the rated current of any plug which can be inserted into it The rated current of intermediate adaptors with integral control devices,shall be equal to the rated current of the control device,or to the rated current of the socket-outlet into which it is intended to fit,whichever is the lower 7 CLASSIFICATIO Accessories classification According to the degree of protection due to the ingress of solid foreign objects According to the degree of protection due to the ingress of water I2X IX According to the provision for earthing Accessories without earthing contact According to the method of connecting the cable According to the type of terminals 7.2 Socket-outlets classification According to the degree of protection against electric shock According to the existence of shutters With shutters Add:Building o.23-24,zhiheng Industrial ark,guankouer Road,antou,anshan District,Shenzhen,Guangdong,China age 5 of 25

6 Report o.: BST Y-1SR-2 IEC Clause Requirement Test Result - Remark Verdict According to the method of application/mounting of the socket-outlet ortable type According to the method of installation Can be removed According to the intended use 7.3 lugs classification Class 0, Class I, Class II Class I 8 MARKIG Rated current in amperes and/or power in watts 10-16A Rated voltage AC V ature of supply ~ Manufacturer's or responsible vendor's name, See page 2 trademark or identification mark I number I20 The length of insulation The suitability to accept rigid conductor 8.2 When symbols are used, they shall comply with requirements 8.3 For fixed socket-outlets the complying marking shall be placed on the main part 8.4 For plugs and portable socket-outlets the marking shall be easily discernible when the accessory is wired and assembled Class II shall be not be marked with the symbol for class II construction marking of terminals for the neutral conductor () - marking of protect earthing terminals - marking not placed on removable parts 8.6 I number for surface-type mounting boxes forming an integral part of socket-outlets 8.7 Marking, durable and easily legible: 15 s water, 15 s hexane 8.8 Special precautions, in instruction sheet Add:Building o.23-24,zhiheng Industrial ark,guankouer Road,antou,anshan District,Shenzhen,Guangdong,China age 6 of 25

7 Report o.: BST Y-1SR-2 IEC Clause Requirement Test Result - Remark Verdict 9 CHECKIG OF DIMESIOS Accessories and boxes comply with Standard Sheet 9.2 o possible engage plug with different rated values or construction Insertion for 1 min with a force of Deviations from dimensions may be permitted Reasonably apply 10 ROTECTIO AGAIST ELECTRIC SHOCK Live parts not accessible Test probe B 10.2 Accessible parts, of insulating material Covers or cover-plates protected by additional insulation by insulating linings or barriers adequately fixed and correctly designed Earthing of metal covers or cover-plates, made while fixing covers or cover plates Connection shall be of low resistance R < 0.05 Ω 10.3 Connection between pin and live socket contact of an adaptor or between a pin of an adaptor and a live socket contact of a socket-outlet 10.4 External parts of adaptors,with the exception of assembly screws and the like,current-carrying and earthing pins,earthing straps and metal rings around pins,shall be of insulating material 10.5 Shuttered socket-outlet portions of adaptors shall,in addition be so constructed that live parts are not accessible without a plug in engagement, with the gauge shown in figure Earthing contacts: cannot deformed by insertion of a plug (test plug: 150 for 1 min.) 10.7 Live parts not accessible for socket-outlet with increased protection (gauge fig. 4 1 ) o such covers UL approval for enclosure materials Live parts did not access 11 ROVISIO FOR EARTHIG Earth connection, made before the current carrying contacts when inserting and broken after when withdrawing Add:Building o.23-24,zhiheng Industrial ark,guankouer Road,antou,anshan District,Shenzhen,Guangdong,China age 7 of 25

8 Report o.: BST Y-1SR Earthing terminals: comply clause 12, same size as supply terminals. - External earthing terminal: suitable for 6 mm 2. Earthing terminal: internal; - Earthing terminals fixed to the base; - Earthing contacts: fixed to the base or cover reliable connected to earthing terminal; contact pieces having protection to corrosion and abrasion - Earthing circuit: one piece or reliably connected 11.3 Accessible metal parts: permanently and reliably connected to earthing terminal 11.4 Socket-outlets, other than ordinary: internal earthing terminal for continuity of earthing circuit 11.5 Connection between earthing terminal: < 0,05Ω test current: [X] 25 A or [ ] 1,5 In A 0.006Ω Limits:0.05Ω 11.6 Fixed socket-outlets 12 TERMIALS General Fixed socket-outlets: [ ] screw-type Conductor connected without special preparation [ ] screwless lugs and portable socket-outlet: terminals with screw clamping: Means for clamping: not serve to fix any other component on rewirable:[ X ] soldered [ ] welded [ ] crimped [X ] other Screw screwed or snap-on not used 12.2 Terminals with screw clamping for external copper conductors: Cross sect. Areas: rigid: to mm 2 flexible: to mm 2 conductor space: fig.: D min.: mm Conductor connected without special preparation Terminals: adequate mechanical strength screws and nuts: ISO thread or similar screws: not be of metal soft or liable to creep Add:Building o.23-24,zhiheng Industrial ark,guankouer Road,antou,anshan District,Shenzhen,Guangdong,China age 8 of 25

9 Report o.: BST Y-1SR Terminals resistant to corrosion Terminals clamp the conductor without damage [ ] rigid/stranded [ ] flexible smallest sect.: mm 2 mm 2 largest sect.: mm 2 mm 2 Torque: m H: mm Mass: kg During the test, conductor no slip out or break Conductor clamped between metal surfaces (terminal fitted as torque: m (2/3) 1 of conductors: [ ] rigid [ ] flexible ull test: for 1 min During the test, conductor not move noticeably Conductors cannot slip out while clamping screws or nuts are tightened largest sect.: mm 2 1 of conductors: [ ] rigid solid: 1 x stranded: 7 x [ ] flexible: x torque (2/3): m After the test, no wire escaped Terminals not work loose: tightened and loosened 5 times largest sect.: mm5 torque: m During the test, terminals not work loose Earthing terminals: adequately locked against loosening. To loosen only by tool Earthing terminals: no risk of corrosion body of brass or other no less resistant mate- rial to corrosion; - precaution to avoid risk of corrosion illar terminals: distance : mm (fig. 34) mantle terminals: distance: mm (fig. 37) 12.3 Screwless terminals for external copper conductors For the complete tests, see appendix Screwless terminals may be of the type suitable for rigid copper conductors only or of the type suitable for both rigid and flexible copper conductors Screwless terminals shall be provided with two clamping units Screwless terminals shall allow the conductor to be connected without special preparation. 0.4m Add:Building o.23-24,zhiheng Industrial ark,guankouer Road,antou,anshan District,Shenzhen,Guangdong,China age 9 of 25

10 arts of screwless terminals mainly intended to carry current shall be of materials as specified in Screwless terminals shall be so designed that they clamp the specified conductors with sufficient contact pressure and without undue damage to the conductor It shall be clear how the connection and disconnection of the conductors is to be made Screwless terminals which are intended to be used for the interconnection of two or more conductors shall be so designed Screwless terminals of fixed socket-outlets shall be designed Screwless terminals shall be properly fixed to the socket-outlet Screwless terminals shall withstand the mechanical stresses occurring in normal use Screwless terminals shall withstand the electrical and thermal stresses occurring in normal use Screwless terminals shall be so designed that the connected rigid solid conductor remains clamped Report o.: BST Y-1SR-2 14 COSTRUCTIO OF ORTABLE ACCESSORIES on rewirable intermediate adaptors shall be such that: - not possible separated flexible cable - not possible opened by hand or by tool 14.2 ins of adaptors shall have adequate mechanical strength (ins not solid: 100 for 1 min. During the test: reduction of dimension < 0,15 mm After the test: dimension of pin < 0,06 mm Test as specified in clause ins of adaptors shall be: --locked against rotation, except where rotation is not likely to impair safety or function ---not removable without dismantling the adaptors; ---adequately fixed in the body of adaptor when the adaptor is wired and assembled as for normal use 14.4 Earthing and neutral contacts: locked against rotation and removable only with the aid of a tool 14.5 Socket contacts: sufficient resiliency Add:Building o.23-24,zhiheng Industrial ark,guankouer Road,antou,anshan District,Shenzhen,Guangdong,China age 10 of 25

11 14.6 ins and socket contacts: resistant to corrosion and abrasion 14.7 Enclosures of rewirable accessories: completely enclose terminals and ends of flexible cable Construction, no risk that: - damage to conductors insulation; - core pressed against accessible metal parts; - core of earthing conductor pressed against live parts 14.8 Screws or nuts: no connection between live parts and earthing terminal when fall out of position 14.9 Earthing contact: ample space for slack of the earthing conductor Terminals located or shielded: free wire 6 mm not touch accessible metal part or emerge from to enclosure For rewireable intermediate adaptoes: - clear how to use; - at least one part fixed; - makeshift methods not used; - suitable for different type of flexible cables; - of insulating material; - metal parts, insulated from earthing circuit Insulating parts: reliably fixed, not possible dismantle without a tool If covers of adaptors are provided with bushes for entry holes for the pins, these bushes shall not become detached inadvertently from the inside when the cover is removed Report o.: BST Y-1SR Screws: captive Engagement face of adaptors: no projection other than the pins,when the adaptor is wired and assembled as for normal use Adaptors shall be so designed that full engagement of associated plugs is not prevented by any projection from their engagement face IX4 or IX5 accessories: - provided with gland; - pins: adequately enclosed when fitted; - socket-outlets: enclosed without a plug - lid springs: resistant material to corrosion Suspension means not allow access to live parts; o free openings I20 Add:Building o.23-24,zhiheng Industrial ark,guankouer Road,antou,anshan District,Shenzhen,Guangdong,China age 11 of 25

12 14.19 Circuit breakers or other protective devices: comply with the relevant standard (if any) Lampholders not allowed with portable accessories lugs for class II: - non rewirable; - cord set with a connector for class II - cord extension set with portable socket-outlet for class II Switches and fuses: comply with the relevant IEC Standard lug integral part of equipment: not cause overheating or undue strain lugs > 16 A 250 V not integral part of equipment ,1 Vn of equipment: V for 1 h Temperature rise not exceed 45 K Torque not exceed 0,25 m;for adaptors,the adaptor is first fitted with a relevant plug complete with 1m of 0.75mm 2 circular flexble cable to 227 IEC 53,to each socket-outlet portion of the adaptor Easy withdrawn by hand from socket-outlet plug withdrawn without pull on the flexible cable The plug portion of adaptors shall be provided with earthing pins or contacts if any one of the socketoutlet portions is provided with an earthing pin or contact Adaptora for use in polarzed socket-outlet shall be so designed that the internal connection shall ensure that plug pins, socket-contacts and terminals,if any,maintain the same polarity at the input and output portins of th adaptor ot possible to plug two or more multiway adaptors into each other,when directly engaged into a fixed socket-outlet in a flush mounting box Report o.: BST Y-1SR-2 16 A 250 V 15 ITERLOCKED SOCKET-OUTLETS ORTIOS OF ADATORS --- Insertion and withdrawal of plug not allowed while socket contacts are live 16 RESISTACE TO AGEIG, TO HARMFUL IGRESS OF WATER AD TO HUMIDITY --- Add:Building o.23-24,zhiheng Industrial ark,guankouer Road,antou,anshan District,Shenzhen,Guangdong,China age 12 of 25

13 Report o.: BST Y-1SR Resistance to ageing: 70±2 C for 7 days (168 h) After the test, no crak visible, and no traces of cloth 16.2 [ ] IX 4 [ ] IX 5 (according to IEC 529) - Fixed and portable socket-outlets tested without a plug - lugs tested in engagement: a) fixed socket-outlet b) portable socket-outlets Electric strength clause 17.2 I Humidity treatment: 91-95% 2 days ordinary accessories 7 days accessories other than ordinary After the test, no damage 95%, 48h 17 ISULATIO RESISTACE AD ELECTRIC STREGTH Insulation resistance: 500 V d.c. for 1 min For socket-outlets, between: a) all poles connected together and body 5MΩ b) each pole in turn and all others... 5MΩ c) metal enclosure and metal foil... 5MΩ d) metal part of cord anchorage and earthing terminals or earthing contact... 5 MΩ e) metal part of cord anchorage and metal rod. 5 MΩ For plugs, between: a) all poles connected together and body 5MΩ b) each pole in turn and all others... 5MΩ c) metal part of cord anchorage and earthing terminal or earthing contact... 5MΩ d) metal part of cord anchorage and metal rod. 5MΩ 17.2 Electric strength: test voltage a.c. for 1 min [ X ] plugs [ X ] socket-oulets a)...[ ] 1250 V [ ] 2000 V b)...[ ] 1250 V [ ] 2000 V c)...[ ] 1250 V [ ] 2000 V d)...[ ] 1250 V [ ] 2000 V e)...[ ] 1250 V [ ] 2000 V o flashover or breakdown >200MΩ >200MΩ See table 17.2 Add:Building o.23-24,zhiheng Industrial ark,guankouer Road,antou,anshan District,Shenzhen,Guangdong,China age 13 of 25

14 Report o.: BST Y-1SR-2 18 OERATIO OF EARTHIG COTACTS -- Earthing contacts: adequate contact pressure tests clause 19 and TEMERATURE RISE --- Rated current: A cross sect.: mm2 Test current: A for 1 h Temperature rise of terminals not exceed 45 K External parts of insulating material (clause 25.3) See table BREAKIG CAACITY --- Test values: 1,1 Vn: V cos Φ: 0,6 1,25 In: A 100 strokes [ ] 30 strokes/min [ ] 15 strokes/min During the test, no sustained arcing occur After the test, no damage 1.1x250V, 1.25x16A 30 strokes/min no damage 21 ORMAL OERATIO --- Test values: V: V I: A cos Φ: 0, strokes [ ] 30 strokes/min [ ] 15 strokes/min During the test, no sustained arcing occur After the test, no damage Shuttered socket-outlets: gauge fig not touch live parts gauge fig. 4-1 Temperature rise: I: A 45 K Electric strength: according to clause 17.2 [ ] 1000 V [ ] 1500 V AC250V, 16A, 30 strokes/min The temperature rise at any points: < 45K 22 FORCE ECESSARY TO WITHDRAW THE LUG Maximum withdrawal force: Force: lug not remain 22.2 Minimum withdrawal force: Force (single pin): Gauge not fall from contact within 30 s FLEXIBLE CABLES AD THEIR COECTIO Cord anchorage adequate o such cables Add:Building o.23-24,zhiheng Industrial ark,guankouer Road,antou,anshan District,Shenzhen,Guangdong,China age 14 of 25

15 23.2 Type of cable or cord: cross sect. Areas: mm 2 ull test: 100 times Torque test: m Displacement 2 mm - Rewirable accessories: end of conductors not moved - on rewirable accessories: no break connections Rewirable accessories up to 16 A: fitted with cable : 245 IEC sect.: mm on rewirable accessories: flexible cable complying IEC 227 or IEC 245 cross sect. Area: mm 2 earthing conductor: green/yellow 23.4 Flexing test: Test current: A mass: [ ] 20 [ ] 10 [ ] flexing or [ ] turned 90 0 [ ] During the test, no interruption of current; no short circuit between conductors Voltage drop: current: A < 10 mv After the test, guard not separated from the body flexible cable, no sign of abrasion or wear Report o.: BST Y-1SR-2 24 MECHAICAL STREGTH Fixed socket-outlets and surface mounting boxes: Impact test: [ ] A 5 blows [ ] B,C,D 4 blows Height of falls: [ ] 100 mm... [ ] 150 mm... [ ] 200 mm... [ ] 250 mm... After the test, no damage; live parts not accessible 24.2 ortable single socket-outlets and pins: Tumbling burrel: m of falls: [X ] [ ] 500 [ ] After the test, no damage. ins not turn with torque 0,4 m 24.3 Ordinary surface type socket-outlets: ø cylinder: mm fixing screws: torque [ ] 0,5 m [ ] 1,2 m - After the test, no damage 24.4 Impact test: - 15±2 C; 16 h mass: 1000 g 100 mm. After the test, no damage ot fixed socket-outlets Add:Building o.23-24,zhiheng Industrial ark,guankouer Road,antou,anshan District,Shenzhen,Guangdong,China age 15 of 25

16 24.5 Compression test: 300 for 1 min - After the test, no damage 24.6 Screwed glands: [ ] Metal [ ] Moulded material φ test rod: mm torque: m - After the test, no damage 24.7 ins of plug portions of adaptors with insulating sleeves are subjected to the following test by means of an appratus as shown in figure Shuttered socket-outlet portins of adaptors shall have a shutter so designed that it withstands the mecheanical force which may be expected in normal use 24.9 Rewirable multiple portable socket-outlets: flexible cable: smallest sect.: mm 2 8 falls - o damage - Accessories IX4 and IX5: test as clause lug: 70±2 C for 1 h pull: _40_ for 1 min - After the test, no pin have been displaced 1 mm Suspension means: steel rod ø 3 mm pushed with 1,5 times force of for 10 s Rod not pierce barrier ortable socket-outlets: suspended with steel rod, force: for 10s During the test, not break ortable socket-outlets: suspended with round head screw ø 3 mm pull force: for 10 s During the test, not break Verification of the non removal of covers, cover plates: [ ] 40 (if comply with tests clause and 24.18) [ ] 80 others - Force applied for 1 min., not come off - Repetition on new samples, no damage Verification of removal of covers, cover plates: Force not exceeding 120, applied 10 times Covers,... come off Repetition on new samples, no damage [ ] 10 (if comply with tests clause and 24.18) [ ] 20 others Report o.: BST Y-1SR-2 Add:Building o.23-24,zhiheng Industrial ark,guankouer Road,antou,anshan District,Shenzhen,Guangdong,China age 16 of 25

17 Report o.: BST Y-1SR [ ] 10 for all covers, Gauge fig. 7..., distances between face C gauge and outline of the side, not decrease Gauge fig. 5 with a force of 1, not enter more than 1 mm 25 RESISTACE TO HEAT --- Accessories and surface mounting boxes: 25.1 Heating cabinet 100±2 C for 1 h - no damage, no live parts accessible - marking still be legible 25.2 Ball pressure test: 125±2 C for 1 h φ impression: 2 mm 25.3 Ball pressure test: [ ] 70±2 C or [ ] C φ impression: 2 mm 25.4 Compression test: 80 ±2 C 1 h 20 o damage 26 SCREWS, CURRET-CARRYIG ARTS AD COECTIOS Connections, withstand mechanical stresses - Thread forming or thread cutting screws, used only if suplied together with the piece... Thread cutting screws, captive - Screws and nuts transmitting pressure contact, engagement in metal thread - 10 times for thread insulating material and for screws of insulating material - 5 times for others times: screws: ø: torque: terminals: mm m [ ] - earthing : mm m [ ] - cord anchorage: mm m [ ] [ ] assembly: mm m [ ] [ ] - others: mm m [ ] [ ] 26.2 Thread insulating material: ensured correct introduction 26.3 Contact pressure not transmitted through insulating material, other than ceramic, Screws and rivets locked against loosening or turning Add:Building o.23-24,zhiheng Industrial ark,guankouer Road,antou,anshan District,Shenzhen,Guangdong,China age 17 of 25

18 26.5 Current-carrying parts and earthing, metal... Report o.: BST Y-1SR-2 - copper; - - alloy containing 58% copper for rolled sheet or - 50% for other parts; - - stainless steel containing 13% chromium; - - steel provided with coating of zinc (ISO 2081); - - steel provided with coating of nickel and chromium (ISO 1456); - - steel provided with coating of tin (ISO 2093); - current-carrying parts subjected to mechanical; - wear, not made of steel with coating 26.6 Sliding contact, metal resistant to corrosion 26.7 Thread-forming and thread-cutting screws not used for current-carrying parts used for earthing continuity at least 2 screws 27 CREEAGE DISTACES, CLEARACES AD DISTACES THROUGH SEALIG COMOUD Creepage distances: (mm) Between: 1. live parts of different polarity... 4(3) 2. live parts and: - accessible insulating/earthed metal parts 4(3) > 4mm > 3mm - parts of earthing circuit... 4(3) > 4mm - metal frames supporting the base... 4(3) - screws for fixing bases, covers,... 4(3) - external assembly screws pins of plugs and metal parts... 6(4,5) 4. accessible unearthed metal parts and a fully engaged plug... 6(4,5) 5. live parts and unearthed metal parts... 6(4,5) Clearances: -- Add:Building o.23-24,zhiheng Industrial ark,guankouer Road,antou,anshan District,Shenzhen,Guangdong,China age 18 of 25

19 Report o.: BST Y-1SR-2 Between: 6. live parts of different polarity live parts and: - accessible insulating/earthed metal parts parts of earthing circuit metal frames supporting the base screws for fixing bases, covers, external assembly screws live parts and: - earthed metal boxes unearthed metal boxes... 4,5 >3mm >3mm 9. live parts and surface on which the base of surface type is mounted live parts and the bottom conductor recess. 3 Distances through insulating sealing compound: live parts covered with at least 2 mm and: 11. surface on which the base is mounted.4(3) 12. the bottom of conductor recess... 2, Insulating sealing compound not protrude above the edge 27.3 Ordinary surface-type: not bare current-carrying strips at the back 28 RESISTACE OF ISULATIG MATERIAL TO ABORMAL HEAT, TO FIRE AD TO TRACKIG Glow wire test: For parts of insulating material [ ] 650 C - not necessary to retain current-carrying in position; [ ] 750 C - necessary to retain current-carrying parts of portable accessories in position; [ ] 850 C - necessary to retain current-carrying in position of fixed accessories --- Add:Building o.23-24,zhiheng Industrial ark,guankouer Road,antou,anshan District,Shenzhen,Guangdong,China age 19 of 25

20 o visible flame, no sustained glowing; or if flame and glowing, extinguish within 30 s no ignition of the tissue paper ins with insulating sleeves: [ ] 120 C [ ] 180 C for 3 h 4 impacts: 100 g mm - o cracks 28.2 Resistance to tracking: (only for I) 50 drops test voltage 175 V o flashover or breakdown Report o.: BST Y-1SR-2 29 RESISTACE TO RUSTIG min in a 10% solution of ammonium chloride; 10 min in humid ambient; 10 min in heating cabinet at 100 C o signs of rust 30 ADDITIOAL TESTS O IS ROVIDED WITH ISULATIG SLEEVES ressure test at high temperature: 200 C for 2 h force: 2,5 Thickness: mm - After the test: 50% mm 30.2 Static damp heat test (IEC ): two cycles - After the test: - insulation resistance and electric strength clause 17; and - abrasion test clause Test a low temperature: - 15 C for 24 h After the test: - insulation resistance and electric strength clause 17; and - abrasion test clause Impact test a low temperature: - 15 C for 24 h 100 g mm 4 impacts - o cracks AEDIX 1 Add:Building o.23-24,zhiheng Industrial ark,guankouer Road,antou,anshan District,Shenzhen,Guangdong,China age 20 of 25

21 Report o.: BST Y-1SR Screwless terminals for external copper conductors Type of terminal: [x ] for rigid conductors only [ ] for both rigid and flexibleconductors Terminals allow proper connection: rigid flex A 1,5 2,5 mm 2 φ: 2,13 mm φ: 2,21 mm Connection without special preparation.3.4 arts for carrying-current, material as clause Clamping conductors with sufficient contact pressure without damage the conductor Conductor clamped between metal surfaces Insertion and disconnection, clear Disconnection, not use a pull; manual operation with or without a tool Openings for use a tool, clearly distinguishable Terminals for two or more conductors: during insertion, clamping independent; during disconnection, same time or separately; each conductor introduce in separate clamping; possibility clamp securely the number of conductors as designed Undue insertion of conductor is prevented Terminals properly fixed to the socket-outlet o work loose during insertion and disconnection Terminals withstand mechanical stresses: TABLE: insulation resistance measurements Add:Building o.23-24,zhiheng Industrial ark,guankouer Road,antou,anshan District,Shenzhen,Guangdong,China age 21 of 25

22 Report o.: BST Y-1SR-2 insulation resistance R between: R (M ) Required R (M ) L to >200M 5 L / to plastic enclosure >200M TABLE: electric strength measurements test voltage applied between: test voltage (V) breakdown L / to enclosure 2000Vac o L to 2000Vac o 19 TABLE: temperature rise measurements Input voltage and current AC250V, 16A Ambient (t1) ( ) 25.3 Ambient (t1) ( ) 25.3 o. Temperature rise dt of part/at: dt (K) Limited dt (K) 1 Internal wire Enclosure inside Enclosure outside Socket Switch TABLE: ball-pressure tests for thermoplastics Limited impression diameter (mm) 2 mm --- art Test temperature ( C) Impression diameter (mm) Socket Enclosure TABLE: glow wire test art Test temperature ( C) Result Socket 750 C Any flame or glowing extinguish within 30s Enclosure 750 C Any flame or glowing extinguish within 30s Add:Building o.23-24,zhiheng Industrial ark,guankouer Road,antou,anshan District,Shenzhen,Guangdong,China age 22 of 25

23 Report o.: BST Y-1SR-2 AEX A: hoto-documentation Add:Building o.23-24,zhiheng Industrial ark,guankouer Road,antou,anshan District,Shenzhen,Guangdong,China age 23 of 25

24 Report o.: BST Y-1SR-2 hoto 1 General Appearance of the EUT hoto 2 General Appearance of the EUT Add:Building o.23-24,zhiheng Industrial ark,guankouer Road,antou,anshan District,Shenzhen,Guangdong,China age 24 of 25

25 Report o.: BST Y-1SR-2 hoto 3 General Appearance of the EUT hoto 4 General Appearance of the EUT Add:Building o.23-24,zhiheng Industrial ark,guankouer Road,antou,anshan District,Shenzhen,Guangdong,China age 25 of 25