Model. Port size (Nominal size B) Weight (kg) 1/ 8, 1/ 4, 3/ 8 1/ 4, 3/ 8, 1/ 2 3/ 8, 1/ 2, 3/ 4 1/ 2, 3/ 4, 1 3/ 4, 1 1, 11/ 2 11/ 2, 2

Transcription

1 Odor Removal Filter Series AMF Series AMF Odor Removal Filter efficiently removes odour in compressed air with an activated carbon element. The unit is designed for use in food processing, pharmaceutical, brewing and breathing systems where odours must be removed. Model Model AMF Rated flow (l/min (ANR)) (1) 200 Port size (Nominal size ) Weight (kg) AMF20 00 AMF30 00 AMF AMF0 300 AMF AMF /, 1/ 4, 3/ 1/ 4, 3/, 1/ 2 3/, 1/ 2, 3/ 4 1/ 2, 3/ 4, 1 3/ 4, 1 1, 11/ 2 11/ 2, Note 1) Max. flow capacity at a pressure of 0.7MPa. It varies depending on operating pressure.refer to ''Flow Characteristics" p and figure of "Max. air flow" p Removes odour and gas ingredients in compressed air. Activated carbon element with large filtration area (1420m 2 /g) Easy replacement of element Specifications Fluid Max. operating pressure Min. operating pressure Proof pressure Ambient and fluid temperature Filtration rating Oil mist removal rate Compressed Air 1.0MPa 0.0MPa 1.MPa to 60 C 0.01µm(9% particle size collection) Less than 3. particles 0.3 µm or larger per liter of air (0 particles or less per cubic foot) (Series "AME" should be installed at upstream.) Accessories Applicable model racket assembly With cap bolt, spring washer (Options) AMF AMF20 AMF30 AMF40 AMF0 AMF60 AMF M1 M2 M3 M4 M M6 M7 Refer to ''Precautions" on p Symbol AMF 4.-27

2 Odor Removal Filter Series AMF How to Order AMF to AMF AMF R ody size Port size (Dimension ) Thread 03 3 Rc(PT) F G(PF) N NPT Accessories (Optional) None With bracket Option R IN, OUT reversal Note) Refer to p regarding How to Order of case assembly. How to Select Select the model in accordance with the following procedure taking the inlet pressure and max. air flow into consideration. (Example) Inlet pressure: 0.6MPa Max.air flow capacity: m 3 /min(anr) q Select the point of contact A of inlet pressure and max.air flow capacity in the graph. w Select the type whose max.air flow capacity is over that point; AMF60. Note) Make sure to select a model that has the maximum flow rate line above the obtained intersecting point. With a model that has the maximum flow rate line below the obtained intersecting point, the flow rate will be exceeded, thus leading to a problem such as being unable to satisfy the specifications. Max. Air Flow HA ID AMG AFF AM FQ1 Related products 4.-2

3 Series AMF Flow Characteristics/Refer to How to Select p regarding model selection. Note) Compressed air over max. flow line in the table below may not meet the specifications of the product. It may cause damage to the element. Element initial condition AMF 1/ AMF0 3/4 AMF20 1/4 AMF60 1 AMF30 3/ AMF 1 1 /2 AMF40 1/

4 Odor Removal Filter Series AMF Construction AMF to AMF60 Component Parts No. Description q ody w Housing e Sight glass Replacement Parts No. Description Material r Element assembly With gasket and O ring Glass fiber NR Material Note Aluminum die cast Aluminum die cast Chrome treatment Epoxy coating on inner surface Tempered glass AMF is aluminum casting. AMF AMF-EL AMF20 AMF-EL20 AMF30 AMF-EL30 Note) Sight glass is indicated in the figure above for easy understanding of parts, however mounting position is different. Refer to dimensions p and for details. Part No. AMF40 AMF-EL40 AMF0 AMF-EL0 AMF60 AMF-EL60 AMF AMF-EL HA ID AMG AFF AM FQ1 Related products 4.-30

5 Series AMF Dimensions: AMF to AMF30 Model AMF AMF20 AMF30 Port size A (Nominal size ) 1 /, 1 / 4, 3 / / 4, 3 / 12 1 / /, 1 / / C D 63 E F 63 G H I 6 J Dimensions with mounting bracket K L M N O 4 P Q R 4. S

6 Odor Removal Filter Series AMF Dimensions: AMF40 to AMF Model AMF40 AMF0 AMF60 AMF Port size Dimensions with mounting bracket A C D E F G H (Nominal size ) I J K L M N O P Q R S 1 2, , , , HA ID AMG AFF AM FQ1 Related products 4.-32

7 Series AMF Precautions e sure to read before handling. Refer to p.0-26 and 0-27 for Safety Instructions and common precautions on the products mentioned in this catalogue, and refer to p.4.0- to for more detailed precautions of every series. Caution on Design Caution q Design the layout so that the mist separator is installed in an area that is less susceptible to pulsations. The element could be damaged if the difference in internal and external pressures exceeds 0.1MPa. w Do not use it with anything other than dry air (such as air containing moisture). e Make sure to install a micromist separator (AMD Series), a micromist separator with a prefilter (AMH Series) or a supermist separator (AME series), on the primary side. r The bracket that is provided with the product is for supporting the product itself. Thus, it cannot support the piping or other items that are connected. If these items need to be supported, provide an additional support. Maintenance Caution q It is not possible to indicate a definite replacement interval for the element because it varies with the odour concentration of the compressed air. Verify the effective deodourization time. Thereafter, replace the element on a regular basis. w To use the odour remover filter for the first time, verify the effective deodourization time according to the procedure indicated below. 1) Record the date on which the odour remover filter is put into operation. 2) Calculate the total length of time that has elapsed from the time it was put into operation until it has started to emit an oil odour. 3) Use the length of time calculated in step 2) as an approximate effective deodourization time. If changes are made to the operating conditions, the effective deodourisation time must be checked again. e Even if its deodourisation performance has not decreased, the replacement interval for the element is when the pressure drop reaches 0.1MPa or after 2 years of operation, whichever comes first. r When the element has reached its replacement interval, replace it immediately with a new element. Replace the O ring, the gasket, and the element with new parts. Mounting Caution q Verify the direction of the flow of the compressed air and the " " mark that indicates the inlet of the product before connecting. It cannot be used if connected in the opposite direction. w Make sure to install this product on horizontal piping