Note) Rated flow (l/min (ANR)) Port size 1 8, , , , , 1 1, , 2

Transcription

1 Mist Separator Series ohs Can remove oil mist in compressed air and separate and remove particles such as rust or carbon of more than 0.3 µm. Modular connection is possible with 150C to 550C. (For details, refer to page 4.) 150C to 550C (Drain cock specifications) 50/850 (Auto drain specifications) Made to Order (For details, refer to page 2.) Model Model 150C 250C 350C 450C 550C Note) ated flow (l/min (AN)) Port size 1 8, , , , , 1 1, , 2 Mass (kg) Note) Max. flow at 0.7 MPa. Max. flow varies depending on the operating pressure. efer to Flow Characteristics (page 14) and Maximum Air Flow (page 15). Note) efer to Made to Order (page 214) for high flow type of 850 or more. Specifications Fluid Max. operating pressure Min. operating pressure 1 Proof pressure Ambient and fluid temperature Nominal filtration rating Oil mist density at outlet Element life 1 With auto drain: 0.1 MPa (N.O. type) or 0.15 MPa (N.C. type) 2 Oil mist density at 30 mg/m 3 (AN) blown out by compressor. Accessory Applicable model Bracket assembly (with 2 mounting screws) Caution Compressed air 1.0 MPa 0.05 MPa 1.5 MPa 5 to 0 C 0.3 µm (Filtration efficiency:.%) Max. 1 mg/m 3 (AN) ( 0.8 ppm) 2 2 years or when pressure drop reached 0.1 MPa 150C 250C 350C 450C 550C BM1 -BM2 -BM3 -BM4 -BM5 BM5 BM57 Be sure to read before handling. efer to front matters 42 and 43 for Safety Instructions and pages to 8 for Air Preparation Equipment Precautions. HAA HAW A IDF IDU IDFA IDFB ID IDG G AFF D H E F SF SFD LLB AD GD Courtesy of Steven Engineering, Inc.-230 yan Way, South San Francisco, CA Main Office: (50) Outside Local Area: (800)

2 SMC MPa SMC MPa Series 150C to 550C 150C 250C 350C 450C 550C Options Body size Applicable compressor output (guide) 2.2 kw 3.7 kw 7.5 kw 11 kw 22 kw 1/8 1/4 3/8 1/2 3/ C hread type ype c F G 1 N NP 1 Conforms to ISO Port size Applicable body size Size 150C 250C 350C 450C 550C B Bracket 2 2 Bracket is included, (but not assembled). 3 he model with bracket is not available for -X15 and -17. F H S U V Note F H Note S U V Note Note Note: Only one drain exhaust method can be selected. : Not available How to Order Accessory Drain Exhaust Specifications/Option Combinations : All types of drain exhaust specifications are available. (including drain guide, J specification) : N.C. auto drain ( C specification) is not available. : Both N.C. and N.O. auto drain ( C, D specification) are not available. X X15 X17 X2 Option 4 F H J S U V Made to Order ( How to Order and the applicable models are different from those shown on this page. Be sure to refer to Made to Order.) With differential pressure gauge (GD ) With - flange With differential pressure gauge (GD ) and - flange 3 N.C., N.O. auto drain, drain piping type ubber material: Fluororubber For medium air pressure (1. MPa) Drain guide 1/4 female threaded 5 - reversal direction With differential pressure switch (125 VAC, 30 VDC), Note) With differential pressure switch (30 VDC) Element service indicator Degreasing wash, 7 white vaseline 5 Drain piping and piping for a stop valve such as ball valve are required. Differential pressure gauge is included, (but not assembled). 7 Only body/housing is degreasing washed. Note) Order U if conformity to the EU directive is required. Auto drain 4 Drain cock (Without auto drain) C N.C. auto drain D N.O. auto drain 4 efer to Drain Exhaust Specifications/ Option Combinations. (Only one drain exhaust method can be selected.) Page for details P.211 P.212 P.212 P.213 F: ubber material: Fluororubber Fluororubber is used for the parts such as O-ring and gasket. H: For medium air pressure (1. MPa) Can be used up to 1. MPa at maximum. J: Drain guide 1/4 female threaded Can be pipied to the drain exhaust port. 1/4 female threaded : - reversal direction Air flow in the separator is changed to right to left. (Air flow direction of the standard: Left to right.) : With element service indicator Pressure drop 0.1 MPa Saturation of the separator can be observed visually. (Element life check) V: Degreasing wash, white vaseline Body/housing is degreasing washed. he lubrication grease for O-ring and gasket is changed to white vaseline. S: With differential pressure switch (with indicator) Saturation of the separator can be observed visually or by an electrical signal. (Element life check) he rated contact voltage is different from U. Max. contact capacity: VA AC, W DC ated contact voltage (max. operating current): 125 V AC (0.08 A), 30 V DC (0.33 A) eed switch U: With differential pressure switch (with indicator) Saturation of the separator can be observed visually or by an electrical signal. (Element life check) he rated contact voltage is different from S. Max. contact capacity: W DC ated contact voltage (max. operating current): 30 V DC (0.33 A) eed switch 12 Courtesy of Steven Engineering, Inc.-230 yan Way, South San Francisco, CA Main Office: (50) Outside Local Area: (800)

3 Mist Separator Series How to Order 50/ Body size Applicable compressor output (guide) 50 kw kw Size hread type ype c F G N NP Port size Applicable body size Accessory B Bracket 1 1 Bracket is included, (but not assembled). 2 he model with bracket is not available for -X15 and -X17. Auto Drain Specifications/Option Combinations Auto drain specifications Option Auto drain specifications/option N.O. auto drain Drain guide reversal direction With element service indicator Made to Order ( How to Order and the applicable models are different from those shown on this page. Be sure to refer to Made to Order.) X With differential pressure gauge (GD ) With differential pressure switch (With indicator, X 125 VAC, 30 VDC) X15 With - flange 2 With differential pressure gauge (GD ) X17 and - flange 2 X2 N.C., N.O. auto drain, drain piping type X12 White vaseline specifications Option 3 J Drain guide 1 4 female threaded 5 - reversal direction With element service indicator 5 Drain piping and piping for a stop valve such as ball valve are required. Auto drain 3 Drain cock (Without auto drain) 4 D N.O. auto drain 3 efer to Auto Drain Specifications/Option Combinations. 4 Body size 850 is equipped with a ball valve (c 3/8 female threaded). Mount a piping adapter IDF-AP0 (page 5) to the ball valve if NP 3/8 female threaded is required. D J Page for details P.211 P.211 P.212 P.212 P.213 P.213 Note) efer to How to Order Bowl Assembly on page. : Available : Not available Auto drain specifications Option Applicable model D J HAA HAW A IDF IDU IDFA IDFB ID IDG G AFF D H E F SF SFD LLB AD GD Courtesy of Steven Engineering, Inc.-230 yan Way, South San Francisco, CA Main Office: (50) Outside Local Area: (800)

4 Series Flow Characteristics (epresentative values) (Element oil saturation) Note) Compressed air over max. flow line in the table below may not meet the specifications of the product. 150C 450C 850 Air flow rate (m 3 /min (AN)) 250C 550C 350C Courtesy of Steven Engineering, Inc.-230 yan Way, South San Francisco, CA Main Office: (50) Outside Local Area: (800)

5 Mist Separator Series Construction 150C to 550C, q r w Component Parts No. Material Note Body Housing Sight glass Aluminum die-casted Aluminum die-casted empered glass Chrome treated Epoxy coating on inner surface he 850 is aluminum casted. eplacement Parts No. 4 Maximum Air Flow Max. air flow rate (m 3 /min (AN)) Element assembly Material Glass fiber, others Applicable model Except option F For option F 150C -EL150 -EL150-F e 250C -EL250 -EL250-F Element assembly: With gasket (1 pc.) and O-ring (1 pc.) efer to page 21 for replacement of auto drain. Element assemblies for Made to Order (X, X12, X15, X17, X2, X) are same as those for standard (see the above table). 350C -EL350 -EL350-F Note) efer to How to Order Bowl Assembly on page. Note) Sight glass is indicated in the figure for easy understanding of component parts. However, it differs from the actual construction. efer to dimensions on pages 1 through to 18 for details. Model 450C -EL450 -EL450-F Model Selection 550C -EL550 -EL550-F 50 -EL EL850 Select a model in accordance with the following procedure taking the inlet pressure and the max. air flow rate into consideration. (Example) Inlet pressure: 0. MPa Max. air flow rate: 5 m 3 /min (AN) 1. Obtain the intersecting point A of inlet pressure and max. air flow rate in the graph. 2. he 50 is obtained when the max. flow line is above the intersecting point A in the graph. Note) Make sure to select a model that has the max. flow line above the obtained intersecting point. With a model that has the max. flow line below the obtained intersecting point, the flow rate will be exceeded, thus leading to a problem such as being unable to satisfy the specifications. HAA HAW A IDF IDU IDFA IDFB ID IDG G AFF D H E F SF SFD LLB AD GD Inlet pressure (MPa) Courtesy of Steven Engineering, Inc.-230 yan Way, South San Francisco, CA Main Office: (50) Outside Local Area: (800)

6 Series Dimensions 150C to 550C P Q Auto drain C: With auto drain (N.C.) D: With auto drain (N.O.) Drain cock Gray: N.C. Black: N.O. 34 F O ø One-touch fitting S, U: With differential pressure switch (with indicator) Y Z : With element service indicator W X S Combination of D: With auto drain (N.O.) and H: For medium air pressure K U D I L M øv Bracket (Accessory) N Note) 1/4 female threaded Note) 23 for 250C. Width across flats 17 H C J A E B Option J: Drain guide 1/4 female threaded Width across flats 24 1/4 female threaded G Maintenance space Drain port M5 Model 150C 250C 350C 450C 550C 1 Port size 1/8, 1/4 1/4, 3/8 3/8, 1/2 1/2, 3/4 3/4, 1 A B C D E F G 15 H I J K Bracket related dimensions U 7 L M 7 V N O P Q S (mm) Element Differential service pressure indicator related switch related dimensions dimensions Courtesy of Steven Engineering, Inc.-230 yan Way, South San Francisco, CA Main Office: (50) Outside Local Area: (800) W X Y Z

7 Mist Separator Series Dimensions 50 Auto drain D: With auto drain (N.O.) Drain cock: Black HAA HAW ø One-touch fitting 34 A IDF IDU IDFA Option IDFB J: Drain guide 1/4 female threaded ID 10 IDG Bracket (Accessory) 85 G AFF Width across flats 24 1/4 female threaded D : With element service indicator 55 H E F SF SFD 23 LLB Maintenance space Drain port M5 AD GD Courtesy of Steven Engineering, Inc.-230 yan Way, South San Francisco, CA Main Office: (50) Outside Local Area: (800)

8 Series Dimensions 850 Auto drain D: With auto drain (N.O.) for Bracket 2 (Accessory) /8 female threaded Option 13 : With element service indicator 30 Maintenance space Drain c 3/8 female threaded 18 Courtesy of Steven Engineering, Inc.-230 yan Way, South San Francisco, CA Main Office: (50) Outside Local Area: (800)