CIRCOGRAPH Sensor systems Rotating Head Ro 35 P Rotating Head Ro 35 L
|
|
- Toby Fitzgerald
- 5 years ago
- Views:
Transcription
1 CIRCOGRAPH Sensor systems Rotating Head Ro 35 P Rotating Head Ro 35 L The optimum rotating head for eddy current testing of metallic semi-finished materials in the diameter range: Ro 35 P 2 to 35 mm Ro 35 L 5 to 35 mm High throughput at testing speeds of up to 3 m/s Minimum retooling time for dimension changes by lateral access Very compact design, overall length of only 345 mm Sturdy, breakdown proof design Ro 35 P with 2 or 4 test heads performed as pin, particularly suitable for largely high flaw resolution together with high precision material guidance Ro 35 L mit two or four test heads performed as levers, particularly suitable for integration in production machines, e.g. drawing lines Roller guide on option, overall length mm Registered trade-marke Rotating Head Ro 35 L/Ro35P with roller guide
2 Features Highly sensitive, contactless testing for mainly longitudinally oriented surface flaws Electronic clearance compensation in the entire diameter range from 2 (5) to 35 mm with CIRCOGRAPH DS With CIRCOGRAPH CP without clearance compensation Longitudinally oriented surface flaws can be detected as from a flaw depth of around 30 µm High throughput without untested gaps: testing speed of 3 m/s at 9,000 rpm when using four test heads with a track width of 5mm each Fast and easy dimension change, snap-lock nozzles, self-clamping adjustment of test heads Improved test head protection thanks to a reduced distance between the entry and exit nozzles Compact design with a length of only 345 mm without the attached roller guide when material guidance is guaranteed by installation in the production machine Optional compact roller guides extend the overall length by only 63.5 mm With small testing diameters the use of the optional roller guide supports material centering Compressed air terminal for blowing the test heads free Application Non-destructive eddy current testing of metallic round materials (wires, bars and tubes) for surface flaws in conjunction with the CIRCOGRAPH electronic testing and evaluation system and a suitable transport mechanism Test material diameter range from 2 to 35 mm resp. 5 to 35 mm Requirements for test material and ambient conditions: surfaces as devoid as possible of scale and protruding burr Test heads with track width [BS] Ro 35 P 1,5-2,5-5 mm Ro 35 L 2,5-5 mm 2 variants of the motor control are offered for operation with the Ro 35 P/L: Motor control MOC E Fixed speed of 4,500 rpm 50 Hz mains connection Motor control MOC S Fixed speed of 9,000 rpm switchable to half rotational speed Straightness 2 mm/m Manually brake as standard Max. material temperature + 80 C; blow-free unit connection recommendedt Electrically brake as option with MOC SB The rotating heads Ro 35 PL can be connected to CIRCOGRAPH DS electronic unit with two or four channels (see leaflet CIRCOGRAPH DS 6.430) and to CIRCOGRAPH CP 1-channel (without electronic clearance compensation, see leaflet CIRCOGRAPH CP 6.412) /49
3 Operating principle The transmitter system Ro 35 P/L operates in accordance with the eddy current principle in conformity with DIN Rotary probes rotate at a short distance and at a high speed around the longitudinally moved test object and helically scan its surface without physical contact. Sondenrotation Probe rotation Rotiersonde Rotating probe The rotary probes scan discrete points, merely registering a small portion of the overall surface at any given moment. In relation to the relatively small registered material surface, every material flaw that the probe passes over represents a large fault. Therefore, the rotary probe detects extremely small material flaws with a high resolution. Each time the rotary probe passes over, extended material flaws generate a signal so as to ensure that the full length of the flaw is indicated. If a suitable material transport speed ( test speed ) is chosen, the probe s test tracks follow without untested gaps so as to ensure complete scanning of the material s surface. Riß Crack Fig. 1 Rotating probe on material flaw Rotiersonde Rotating probe Sondenwirkbereich Effective probe area Abtastspuren Scanning tracks The maximum test speed is the result of the revolution speed, the number of probes and the probe track width. With two probes offset by 180 resp four probes offset by 90, the tracks follow in succession without gaps or overlaps when the test object is transported forwards by two resp. four track width in every revolution. The signals picked up by the probes are transferred from the transmitter system to the electronic test unit for evaluation. The field current for powering the probes and the probe output signals are transmitted without physical contact by rotary transformers. The electronic unit consists of a process-controlled electronic testing and evaluation unit featuring interactive operation and convenient display and documentation possibilities. Gesamtfehlersignal Overall flaw signal Fig. 2 Scanning track and flaw signals 1 4 Abtastspuren Scanning tracks Fig. 3 Scanning tracks, four probes offset by /49 3
4 Structure Besides the rotating head, which scans the test material and which generates the eddy current signal, a CIRCOGRAPH electronic test unit, a motor contol unit and two connecting cables are needed for a complete testing system. The rotating head Ro 35 P/L consists of the following obligatory components: Rotating head Ro 35 P/L 2 resp 4 test heads (adjustable according to a scale) Protective nozzles Motor control Test and control cables, motor cable The following are optionally available to improve adaption to the conditions of the testing task: 2 roller guides Sliding table Tilting table (without roller guide only) Special guide unit Main voltage adaption Sensorsystem Ro 35 P/L without roller guide Motor control MOC E CIRCOGRAPH CP Sensorsystem Ro 35 P/L without roller guide Motor control MOC S (SB) CIRCOGRAPH DS Bild 4 Structure of a test unit /49
5 Rotating head Ro 35 P/L The rotating head consists of the following components: Bearing case One chamber envelops the test zone. Three-phase drive Indestructible drive featuring a standard squirrel-cage motor connected to an external motor control. Rotating head electronics The electronic system of the rotating head amplifies the probe signals and the field current and is fitted in a sturdy box on the side of the bearing case for easy servicing. The cables to the test electronics are connected by means of MIL connectors. Start-up protection when the bearing case is open Hollow shaft with contactless rotary transformer Hand brake to considerably reduce the run-out time Three-phase drive Start-up protection Bearing case Rotating head electronics Hollow shaft Fig. 5 Rotating head Ro 35 P/L Bearing case open Protective nozzles The protective nozzles perform a dual function: Centring the test material in the test zone to a dimension that can be balanced out by the clearance compensation. Breakdown protection for the test heads, particularly during fit-in and exit of the test material provided the straightness and end conditions are met. Fig. 6 Protective nozzles with nozzle holders, assembly tool positioned /49 5
6 It is imperative to use diameter-adapted protective nozzles. Nozzles with the same nominal dimensions must always be used. For breakdown and safety reasons, operation without protective nozzles is forbidden. Protective nozzles are available in the following nominal diameters (NM = nominal diameter): 2,0 to 8,0 mm: material diameter + 0,1mm > 8,0 to 15 mm: material diameter + 0,5 mm > 15 to 35 mm: material diameter + 1,0 mm Protective nozzles can be ordered or can be produced by the customer according to a drawing. Please enquire about a special guide unit, particularly for use with highly sensitive materials such as Cu tubes, polished surfaces etc. Generally, no additional roller guide is recommended when using special guide units. Fig. 7 Protective nozzles Ro 35 L, nozzle holder with replaceable nozzles, schematic diagram NM 5 to 36 mm Fig. 8 Protective nozzles Ro 35 P, nozzle holder with replaceable nozzles, schematic diagram NM 2 to 36 mm /49
7 Motor controls Motor control MOC E Fixed speed of 4,500 rpm, 50 Hz mains connection Motor control MOC S Speed of up to 9,000 rpm switchable to half rotational speed Fig. 9 MOC E MOC S Roller guide Roller guides are recommended whenever the material transport drivers cannot be set up directly before and after the transmitter system. The roller guides offer two advantages: In the set up mode, a calibration piece featuring comparison flaws can be comfortably held in a central position outside of the test line and the electronic test unit can be adjusted easily because the rotary probes periodically scan the test flaw and the signal is displayed practically statically. The roller guides improve centricity, particularly in the lower dimension range, and reduce vibrations. The roller guides are fitted on the rotating head on the entry and exit sides. Diameter adjustment by hand wheel. The complete diameter range of the Ro 35 P/L is covered by two roller sets: Ø mm Standard roller set Ø 2-8 mm with additional roller set Fig. 10 Roller guide /49 7
8 Tables If guide units are positioned particularly close together, a sliding or tilting table facilitates replacement of the nozzles and maintenance work. Tilting and sliding tables are conceived as special accessories for test lines. Fig. 11 Sliding table which moves transverse to the test line Fig. 12 Tilting table featuring a swivel axis parallel to the test object axis /49
9 Technical data Ro 35 P/L Diameter range testing material 2 (5) to 35 mm, continuously adjustable Revolution speed rpm with motor control MOC E or rpm with motor control MOC S/SB Type of test Test heads with pin type probes for Ro 35 P with lever type probes for Ro 35 L Probe track width: Ro 35 P Ro 35 L Test speed for gapless (5 mm track width) Dimensions Mass Power supply Drive Useful bearing life at max. speed (depending on ambient conditions) without physical contact adjustable according to a scale two, offset by 180, with one probe each, or four, offset by 90, with one probe each 5 mm, 2,5 mm, 1,5 mm 5 mm, 2,5 mm 1.5 m/s at a speed of 4,500 rpm, 3.0 m/s at a speed of 9,000 rpm see dimension drawing approximately 70 kg 3 x 400 V three-phase for the drive, if the supply voltage differs, adaption via an isolating transformer Three-phase motor, n o = 1425/2850 rpm, P = 1.4/1.8 kw Typical operating hours Grease lubrication rpm rpm app. app h h Roller guide (option) Standard Additional Mass Dimensions Ø 4.5 to 35 mm Ø 2 to 8 mm approximately 3.8 kg See dimension drawing /2002 9
10 ca ,5 63, ,5 343 Fig. 13 Dimension drawing /49
11 , Fig. 14 Dimension drawing /49 11
12 Should you have any special problems please contact: INSTITUT DR. FÖRSTER Prüfgerätebau GmbH & Co. KG Postfach D Reutlingen In Laisen 70 D Reutlingen Phone +49 (0) Fax +49 (0) or one of our agencies abroad Order-No OUTSTANDING! FÖRSTER DQS-REG.NO the first German manufacturer of eddy current equipment with ISO 9001 certification Information and illustration may be subject to change Edition 03/2002 Author Sy
Color marking device 1.178
device 1.178 Fig 1 Components of the color marking device Application The color marking device is used for automatically marking of the defects detected by nondestructive material testing. Type number
More informationInstallation and Operational Instructions for EAS - HTL housed overload clutch Sizes 01 3 Type 490._24.0
Please read these Operational Instructions carefully and follow them accordingly! Ignoring these Instructions may lead to malfunctions or to clutch failure, resulting in damage to other parts. Contents:
More informationHigh-Speed Ultrasonic Testing of ERW Pipes
19 th World Conference on Non-Destructive Testing 2016 High-Speed Ultrasonic Testing of ERW Pipes W.A.K. DEUTSCH 1, M. JOSWIG 1, R. KATTWINKEL 1, H. HARMUTH 1 1 KARL DEUTSCH Prüf- und Messgerätebau GmbH
More informationAxial-radial cylindrical roller bearings
Axial-radial cylindrical roller bearings Designs and variants.............. 320 Bearing data..................... 321 (Boundary dimensions, tolerances) Product table 5.1 Axial-radial cylindrical roller
More informationLoad Cell for Manually Operated Presses Model 8451
w Technical Product Information Load Cell for Manually Operated Presses 1. Introduction... 2 2. Preparing for use... 2 2.1 Unpacking... 2 2.2 Using the instrument for the first time... 2 2.3 Grounding
More informationDynamic Elements Linear Slides Mechanical Drive Elements Accessories for Mechanical Drive Elements
8 Dynamic Elements Mechanical Drive Elements Accessories for Mechanical Drive Elements The Dynamic Elements product group of the MB Building Kit System contains components which enable precise linear movement.
More informationElectromagnetic clutch-brake combinations INTORQ
Electromagnetic clutch-brake combinations INTORQ 14.800 14.867 7.5 120 Nm setting the standard 2 CBC en 5/2005 Contents Clutch-brake combinations Product information 4 Type code 6 Design selection 8 Overview
More informationCNC swiss and non-swiss. turning center TNL32
CNC swiss and non-swiss turning center TNL32 Thanks to the outstanding technical features of the TRAUB TNL32 CNC swiss and non-swiss turning center, you will notice measurable improvements in production.
More informationGuide units. For toolmaking, fixture manufacturing and machine engineering
Guide units For toolmaking, fixture manufacturing and machine engineering Guide units in compliance with DIN, ISO and STEINEL standards or according to your specifications Guide pillars Guide and pillar
More informationReaction Torque Sensor
Force 1 1 N m up to 1 000 1 000 N m Type 9329A 9389A These easy to install piezoelectric reaction torque sensors are particularly suitable for measuring rapidly changing torques at non-rotating shafts.
More informationLexium integrated drives
Description ILp for CANopen, PROFIBUS DP, RS ILE with brushless DC motor Description ILE comprise control electronics with a fieldbus interface for CANopen DS, PROFIBUS DP or RS and a brushless DC motor.
More informationS840, S845, S846 Series Single-break changeover, NC or NO contacts, positive opening operation and wiping action Catalogue D40.en
Snap-action switches S80, S85, S86 Series Single-break changeover, NC or NO contacts, positive opening operation and wiping action Catalogue D0.en Snap-action switches, S80, S85, S86 Series Single-break
More informationRoHS Directive-Compliant Motorized Linear Slides EZS Series for Clean Room Use. Features
Motorized Actuators RoHS Directive-Compliant Series for Clean Room Use The Series for Clean Room Use is a product designed with the same level of function and performance as the Series but is ideal for
More informationPosition Switches Series 8074/2
www.stahl.de > Ex e metal enclosure > Operating temperature range -40 C... +70 C > Dimensions and characteristic values according to EN 50041 > Degree of protection IP66 > Extensive assortment of actuators,
More informationtype r remote drive for auxiliary
type r remote drive for auxiliary KICKER MOTORs installation MANUAL OC15374 03/08/2013 Revision NEW First Edition Revision History Description 2013 Canada Metal (Pacific) Limited. All rights reserved.
More informationBall Rail Systems RE / The Drive & Control Company
Ball Rail Systems RE 82 202/2002-12 The Drive & Control Company Rexroth Linear Motion Technology Ball Rail Systems Roller Rail Systems Standard Ball Rail Systems Super Ball Rail Systems Ball Rail Systems
More information10 Thrust ball bearings
10 Thrust ball bearings Designs and variants.............. 1010 Single direction thrust ball bearings... 1010 Double direction thrust ball bearings.. 1010 Cages............................ 1010 Bearings
More informationEMC-HD. C 01_2 Subheadline_15pt/7.2mm
C Electromechanical 01_1 Headline_36pt/14.4mm Cylinder EMC-HD C 01_2 Subheadline_15pt/7.2mm 2 Elektromechanischer Zylinder EMC-HD Short product name Example: EMC 085 HD 1 System = ElectroMechanical Cylinder
More informationSteering column and sensor
Steering column and sensor Type LAB Series 1 x Nominal voltage 12 to 48 volt Output signal digital, analog and direction (option) HE 11874 / 09.2017 2 LAB HE 11874 / 09.2017 Page Content 4 4 5 6 7 7 8
More informationCourtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (800)
01_1 Miniature st Headline_36 Ball Rail pt/14.4 Systems mm second line 2 Linear Motion and Assembly Technologies Miniature Ball Rail Systems Ball Rail Systems Roller Rail Systems Linear Bushings and Shafts
More informationPosition Switches Series 8070/2
www.stahl.de > Ex e plastic enclosure > Operating temperature range -60 to +60 C > Dimensions and characteristic values according to EN 50041 > Degree of protection IP66 / IP67 > Extensive assortment of
More informationKey-Words : Eddy Current Testing, Garter Spring, Coolant Channels, Eddy Current Test Coil Design etc.
More Info at Open Access Database www.ndt.net/?id=15054 Development of Eddy Current Test Technique for Detection of Garter Springs in 540 and 700 MWe Pressurized Heavy Water Reactors Arbind Kumar AFD,
More informationSmall Tool Instruments and Data Management
Small Tool Instruments and Data Management Digital Micrometers Pages 28 34 Analogue Micrometers Pages 35 42 Special Version Micrometers Pages 43 63 External screw type micrometers accessories Pages 65
More informationTension and Compression Load Cell Model 8435
Technical Product Information w Tension and Compression Load Cell 1. Introduction... 2 2. Preparing for use... 2 2.1 Unpacking... 2 2.2 Using the instrument for the first time... 2 2.3 Grounding and potential
More informationDISC BRAKES WITH THRUSTER BUEL BRAKING UNLIMITED. Made in Germany
DISC BRAKES WITH THRUSTER BUEL BRAKING UNLIMITED Made in Germany DISC BRAKES WITH THRUSTER BUEL PINTSCH BUBENZER Disc Brake SB 28.3 / SB 23.3 with BUEL 29000 28000 27000 26000 BL 550-8 25000 24000 23000
More informationShaft Couplings Flange-Couplings Rigid Shaft Couplings Flexible Couplings
Shaft Couplings Flange-Couplings Rigid Shaft Couplings Flexible Couplings 44 Edition 2013/2014 RINGSPANN Registered Trademark of RINGSPANN GmbH, Bad Homburg 2 Table of Contents Flange-Couplings Page Flange-Couplings
More informationUniversal. CNC Turning machine TNA500 TNA600
Universal CNC Turning machine TNA500 TNA600 TRAUB TNA this name is highly regarded throughout the world for machining large chuck, shaft or bar parts. With their precision and efficiency, short setup time
More informationInstallation and Operational Instructions for EAS -Compact overload clutch, Type 49_. 4._ Sizes 4 and 5
Please read these Operational Instructions carefully and follow them accordingly! Ignoring these Instructions may lead to malfunctions or to clutch failure, resulting in damage to other parts. Contents:
More informationMAXXMILL Vertical milling center for 5-sided machining MILLING
MAXXMILL 400 630 750 Vertical milling center for 5-sided machining MILLING EMCO-WORLD.COM MAXXMILL 400 Compact vertic 1 MACHINE BED Machine bed and slide systems made of solid welded steel and cast iron
More informationContents. Page. 1. Product description. 2. The AXC line of linear axes. 3. AXLT line of linear tables. AXC and AXS product overview...
SNR Industry Contents Page 3 1. Product description AXC and AXS product overview... 6-8 Dynamic load ratings of the linear motion systems... 9 Compact modules... 10-11 Linear tables... 12 Telescopic axes...
More informationHigh precision and super light. Angular contact roller bearings from INA
High precision and super light Angular contact roller bearings from INA Angular contact roller bearings High precision and super light The limits of conventional ball reaching their performance limits
More informationPosition Switches Series 8060/2
www.stahl.de > Ex e plastic enclosure > Operating temperature range -60 to +60 C > Dimensions and characteristic values according to EN 50047 > Degree of protection IP66 / IP67 > Extensive assortment of
More informationSD, SE, SDE, SCO series Multipole switchgear for rail vehicles: Disconnecting switches, Earthing Switches, Disconnector with Earthing Switches,
4 Electrics for Rolling Stock Multipole switchgear for rail vehicles: Disconnecting switches, Earthing Switches, Disconnector with Earthing Switches, Change-Over-Switches 600 V to 3 kv Catalogue F84.en
More informationPiling and drilling rig LRB
Piling and drilling rig LRB 15 51.4 Concept and characteristics LRB 15 Leader top Auxiliary winch Leader 1.5 m Vertical travel device Attachment with quick connection Inclination device Leader rotation
More informationLexium integrated drives
Description ILp for DeviceNet, EtherCAT, Modbus TCP, ILE with brushless DC motor Description ILE comprise control electronics with a fieldbus interface for DeviceNet, EtherCAT, Modbus TCP or and a brushless
More informationHydraulic power unit CE8L Technical data
Hydraulic power unit CE8L 26/02/15 1/10 1 - PRESENTATION 1-1 Use The hydraulic power unit CE8L (fig.1) is intended to deliver an hydraulic pressure to open the emergency hydraulic brakes SH and TH. Fig.
More informationUX series. Value model UX300. Offer max. value for small parts up to Ø400 x 352 mm / 100 kg. Motor FANUC = F SIEMENS = S HEIDENHAIN = X / Y / Z (kw) F
UX SERIES UX series Value model UX300 Offer max. value for small parts up to Ø400 x 352 mm / 100 kg FANUC = F SIEMENS = S HEIDENHAIN = Motor T UX300 5 axes Spindle code 9B 12B 15C 18A 24A X / Y / Z (kw)
More information8 (800) (звонок бесплатный) Length tolerances for shafts to DIN 7168, medium series.
2 Guiding systems Fig 20 SKF precision shafts ( fig 20 ) can be supplied either as solid or hollow shafts. The solid shafts are available in all dimensions required to fit SKF linear ball bearings; the
More informationCirculation pumps BFP-ATEX-T3/T4
Circulation pumps BFP-ATEX-T3/T F ATEX - range of use: to zone 1 and zone 1 T3 to zone 1 and zone 1 T Low noise emission High vol. efficiency Optimum suction Gerotor principle Resistant to contamination
More informationHigh-Tech Waterjet Cutting
6,200 bar High-Pressure Innovations STREAMLINE PRO-I ultra high-pressure pumps PRO series cutting heads AMS PRO abrasive management system PSC PRO installation parts High-Tech Waterjet Cutting About KMT
More informationDemag KB conical-rotor brake motors. Drives with unique principle
Demag KB conical-rotor brake motors Drives with unique principle 37468 Demag KB conical rotor brake motors: Demag KB conical rotor brake motors offered by Demag Cranes & Components feature a unique principle:
More informationROTARY MODULES. Rotary modules
Rotary modules Rotary modules ROTARY MODULES Series Size Page Rotary modules RM swivel unit 156 RM 08 160 RM 10 162 RM 12 164 RM 15 168 RM 21 172 RM rotor 176 RM 50 180 RM 110 182 RM 200 184 RM 310 186
More informationLenze. Drives with worm gearboxes 52.
6 887 Lenze Drives with worm gearboxes 5. Lenze Drive Systems GmbH, Postfach 0 5, D-76 Hameln, Site: Groß Berkel, Hans-Lenze-Straße, D-855 Aerzen, Phone ++9 (0) 55 8-0, Telefax ++9 (0) 55 8- E-Mail: Lenze@Lenze.de
More informationMiniature Ball Rail Systems
R310EN 2210 (2004.06) The Drive & Control Company 2 Bosch Rexroth AG Linear Motion and Assembly Technologies Miniature-BRS R310EN 2210 (2004.06) Linear Motion Systems Ball Rail System Standard Ball Rail
More informationPrecision Modules PSK
Precision Modules PSK 2 Bosch Rexroth AG Precision Modules PSK R999000500 (2015-12) Identification system for short product names Short product name Example:: P S K - 050 - N N - 1 System = Precision Module
More informationPROFIMAT MC/RT. Key data. The compact production machine
A member of the UNITED GRINDING Group The compact production machine Key data Whether precision, profile, internal or external cylindrical grinding the PROFIMAT MC is a highly efficient grinding centre
More informationAutomatic sensor lock-gate for extreme applications with ceramic sealing to the proces
Pneumatic Retractable Fittings Chem Energy Pharm Food Water Ceramat Sensor Lock-Gate Automatic sensor lock-gate for extreme applications with ceramic sealing to the proces Unique lock-gate principle The
More informationRodless Pneumatic Cylinders Series OSP-P
Rodless Pneumatic Cylinders Series OSP-P System Concepts & Components... 2-5 Technical Data... 7-9 Dimensions... 10-15 Active rakes... 16-19 Accessories (Mounts & Supports)... 20-29 Ordering Information...30
More informationR310EN 2302 ( ) The Drive & Control Company
R31EN 232 (26.4) The Drive & Control Company Bosch Rexroth AG Linear Motion and Assembly Technologies Ball Rail Systems Linear Bushings and Shafts Ball Screw Drives Linear Motion Systems Basic Mechanical
More informationDiaphragm seal with sterile connection For sanitary applications Models , , and , threaded connection
Diaphragm seals Diaphragm seal with sterile connection For sanitary applications Models 990.18, 990.19, 990.20 and 990.21, threaded connection WIKA data sheet DS 99.40 for further approvals see page 3
More informationElectric. Efficient. Compact & precise. ENGEL e-mac
Electric. Efficient. Compact & precise. be the first. All-electric. Best-in-class efficiency and precision to the max. All of the s movements are performed by servo-electric drives. The all-electric drive
More informationAutomatic sensor lock-gate for extreme applications with ceramic sealing to the proces
Pneumatic Retractable Fittings Chem Energy Pharm Food Water Ceramat Sensor Lock-Gate Automatic sensor lock-gate for extreme applications with ceramic sealing to the proces Unique lock-gate principle The
More informationSolenoid interlock AZM 200 The non-contact interlock.
Solenoid interlock AZM 200 The non-contact interlock. Solenoid interlock AZM 200 The non-contact Solenoid interlocks demand accurate alignment of actuator and device. This requirement is met on new machinery.
More informationR310EN 2211 ( ) The Drive & Control Company
eline Ball Rail Systems R310EN 2211 (2006.04) The Drive & Control Company Bosch Rexroth AG Linear Motion and Assembly Technologies Ball Rail Systems Roller Rail Systems Linear Bushings and Shafts Ball
More informationS826, S926 Series Dual changeover switches with positive opening operation and wiping contacts Catalogue D26.en
2 Snap-action switches S826, S26 Series Dual changeover switches with positive opening operation and wiping contacts Catalogue D26.en 2 Snap-action switches S826 Series Dual changeover switches with positive
More informationPiling and drilling rig LRB Courtesy of Machine.Market
Piling and drilling rig LRB 16 EN 51.6 Concept and characteristics LRB 16 Leader top Auxiliary winch Leader 1.5 m Leader vertical travel device Attachment with quick connection Leader inclination device
More informationpressure transducer Miniature pressure transducer model 81530
Section 8.1 8.2 8.3 High Pressure transducer model 8201 N Miniature pressure transducer model 81530 pressure transducer model 8221 Pressure Transducers 8103-8107 Pressure transducers / pressure transmitters
More informationPPT 802, Proximity Probe Transducer System
PPT 802, Proximity Probe Transducer System PPH 080 : Proximity Probe Head PEC 036 : Probe Extension Cable PRD 020 : Proximity Probe Driver Feature Non-contacting measurement system based on eddy current
More informationQuarter turn actuator DAPS..R..-F..
Quarter turn actuator DAPS..R..-F.. Festo AG & Co. KG Postfach D-73726 Esslingen +49 711 347-0 www.festo.com (en) Operating instructions 8030408 1309g [8030416] Original: de Quarter turn actuator DAPS..R..-F.....
More informationProduct Information. Rotary gripping module with angular gripper RW
Product Information RW RW Flexible. Modular. Compact. Gripper Swivel Module RW Rotary gripper combination, consisting of a rotary module and a 2-finger angular gripper Field of application Gripping and
More informationORIGA Pneumatic Linear Drives OSP-L
ORIGA Pneumatic Linear Drives OSP-L Very long lifetime and lowest leakage A NEW Modular Linear Drive System With this second generation linear drive Parker Origa offers design engineers complete flexibility.
More informationGauge Blocks - Reference for Precision
ß Measuring and Laying-Out Tools, Testing Instruments Gauge Blocks - Reference for Precision Parallel gauge blocks in compliance with DIN EN ISO 650 are supplied in the following calibration and tolerance
More informationBSW , -493, -494 Mechanical Rotary Cam Switches. User's Guide. Mechanical Rotary Cam Switches BSW BSW BSW
BSW 819-492, -493, -494 User's Guide Mechanical Rotary Cam Switches BSW 819-492 BSW 819-493 BSW 819-494 The CE Marking is your guarantee that our products meet the requirements of EC Directive 89/336/EC
More informationStellantriebe. Classic Line. Electrical Actuators
Stellantriebe Classic Line Electrical Actuators ARIS Stellantriebe GmbH Rotter Viehtrift 7-9 Tel.: +49 (0)2241 25186-0 53842 Troisdorf / Germany Fax: +49 (0)2241 25186-99 www.stellantriebe.de ARIS Stellantriebe
More informationTORRIX Magnetostrictive level sensor
TORRIX Magnetostrictive level sensor Precision Versatility Security Sensors & Systems Worldwide: www.fafnir.com FAFNIR Quality and Satisfaction Company: Based in Hamburg, Germany, FAFNIR GmbH has over
More informationVolute Casing Centrifugal Pumps in High Temperature Design with Magnetic Drive. Series CNH-ML
Volute Casing Centrifugal Pumps in High Temperature Design with Magnetic Drive Series CNH-ML Usage For pumping toxic, volatile, explosive or other fluids harmful to the environment which call for service
More informationSRX14/16. Electric Reach Truck kg kg.
Electric Reach Truck 1.400 kg 1.600 kg www.clarkmheu.com DIMENSIONS Wa AST e b5 b3 b4 b11 h4 l4 h3 h1 h6 h2 h7 C m2 l2 y l7 l1 s e b5 b3 b4 b11 b1 Wa AST For corresponding data see specification chart.
More informationCLAMP AND FLANGE COUPLINGS
POWER TRANSMISSION RIGID COUPLINGS CLAMP AND FLANGE COUPLINGS 2 CLAMP AND FLANGE COUPLINGS RIGID COUPLINGS CLAMP AND FLANGE COUPLINGS FLANGE COUPLINGS DIN 116 Flange couplings are torsionally stiff, particularly
More informationAddendum to the Catalog Diagnostic unit /DUE for function and wear monitoring of brakes BE.., BF.., BT..
Drive Technology \ Drive Automation \ System Integration \ Services Addendum to the Catalog Diagnostic unit /DUE for function and wear monitoring of brakes BE.., BF.., BT.. Date 8/2015 22501061/EN Table
More informationWEIGH SYSTEM WS 1 kg M CD with Weighing Electronics Unit EWK 3010 / 3015 TS
GENERAL DESCRIPTION The WS 1 kg M CD weigh system, with its integrated infeed and outfeed belts, forms, in conjunctions with a type EWK 3010 or EWK 3015 TS weighing electronics unit, a high-performance
More informationATX165SL/SLE Series Mechanical-Bearing, Screw-Driven Linear Stage
ATX165SL/SLE Series Mechanical-Bearing, Screw-Driven Linear Stage Travel lengths up to 250 mm with anti-creep crossed-roller bearings Optional center-mounted linear encoder for direct position feedback
More informationProduct information PI 62. Disk-type tool turret
Product information PI 62 Disk-type tool turret with integrated tool direct drive series 0.5.437.2xx 0.5.437.6xx 2013-08-29 Table of Contents Disk-Type Tool Turret with Tool direct drive Description...
More informationAccurate measurement of compressed air consumption and detection of leaks. Measuring the individual consumption per customer / cost centre
Inline Flowmeter for compressed air and gases DN15 - DN50 / 16 bar The flow meter of the series, based on the measurement principle of thermal mass flow, is ideally suited for the measurement of flow of
More informationWheel Torque Transducer WTT-D x
Wheel Torque Transducer WTT-D compact robust wireless Waterproof wheel torque transducer with telemetric signal transmission productive testing www.caema.de Advantages Driving in all weather conditions
More informationKiTorq Rotor. Torque. Torque Measuring Unit (Rotor) for a Torque Measuring Flange. Type 4550A...
Torque KiTorq Rotor Type 4550... Torque Measuring Unit (Rotor) for a Torque Measuring Flange KiTorq Rotor Type 4550... for measuring highly dynamic torques. Combinations of various rotors and stators Transmission
More informationCNC swiss and non-swiss. turning center TNL12K
CNC swiss and non-swiss turning center TNL12 TNL12K TNL12 - Ideal for your production requirements The machine concept of the TNL12 has been matched to the daily re quire ments of the user. But this is
More informationSeries S847 Changeover switches featuring wiping, galvanically isolated, double-break contacts and positive opening operation Catalogue D47.
Snap-action switches Changeover switches featuring wiping, galvanically isolated, double-break contacts and positive opening operation Catalogue D47.en Snap-action switches, S847 Series Dual changeover
More informationGMD 13 New gravimetric measuring system with evaluation on location
Dr. Födisch Umweltmesstechnik AG Zwenkauer Strasse 159 04420 Markranstädt Germany Phone: +49 34205 755-0 Fax: +49 34205 755-40 E-mail: sales@foedisch.de Internet: www.foedisch.de GMD 13 New gravimetric
More informationPower distribution components
Industrial electronics Power distribution components Reliable, cost-effective, complete R England sv_001.fm Rittal power distribution components Bar centre distance (mm) Number of poles Busbar dimensions
More informationHybrid Architectures for Automated Transmission Systems
1 / 5 Hybrid Architectures for Automated Transmission Systems - add-on and integrated solutions - Dierk REITZ, Uwe WAGNER, Reinhard BERGER LuK GmbH & Co. ohg Bussmatten 2, 77815 Bühl, Germany (E-Mail:
More informationInductive conductivity meter
Inductive conductivity meter CIP version Type 8228 can be combined with... Standard version Perfect for concentrated liquids and wide conductivity range Pre-parameterized versions available for direct
More informationUX series. Value model UX300. Offer max. value for small parts up to Ø400 x 300 mm / 100 kg. Motor SIEMENS = S HEIDENHAIN = H.
UX SERIES UX series Value model UX300 Offer max. value for small parts up to Ø400 x 300 mm / 100 kg SIEMENS = S HEIDENHAIN = H Motor UX300 9B 12B 15C 24A X / Y / Z (kw) H 5.1 / 5.4 / 5.4 S A / C (kw) H
More informationБерг АБ Тел. (495) , факс (495)
AUTOMATION Linear- and Rotary Modules Table of Contents 1 Product Overview............................................. 4 1.1 Selection of the Linear Modules................................. 8 1.2 Selection
More informationProduct Information ECN 425 EQN 437. Absolute Rotary Encoders with Hollow Shaft and Expanding Ring Coupling for Safety-Related Applications
Product Information ECN 425 EQN 437 Absolute Rotary Encoders with Hollow Shaft and Expanding Ring Coupling for Safety-Related Applications 4/2014 ECN 425, EQN 437 Rotary encoders for absolute position
More informationLinear & Rotary Actuators F-41
& F-41 & DRS Series Equipped Page Series Equipped F-4 F-41 F-4 Series Equipped $ $ For detailed information about regulations and standards, please see the Oriental Motor website. The Series is a line
More informationSD3-60 AIRCRAFT MAINTENANCE MANUAL CHAPTER 54 - NACELLES TABLE OF CONTENTS. Chapter Section Subject Subject Page
CHAPTER 54 - NACELLES TABLE OF CONTENTS Chapter Section Subject Subject Page 54-10-01 NACELLE - REMOVAL/INSTALLATION General 401 Removal 401 Installation 403 54-40-01 ENGINE MOUNTING FRAME ATTACHMENTS
More informationEAS822 (Contrac) Power Electronic Unit
Contents Data Sheet Rev. A EAS822 (Contrac) Power Electronic Unit For continuous control of Contrac actuators PME120 AN and LME620 AN Microprocessor-controlled power electronic unit with integrated frequency
More informationUltrasonic and Magnetic Particle Testing of New Railway Wheels
19 th World Conference on Non-Destructive Testing 2016 Ultrasonic and Magnetic Particle Testing of New Railway Wheels Wolfram A. Karl DEUTSCH 1, Wolfgang WEBER 1, Klaus MAXAM 1, Mathias RAZENG 1, Frank
More informationAir flow. Content 09.01
Content The right flow sensor for each and every measuring task 09.02 Correction factors ensure precise air speed measurement. 09.03 Air Speed for selected Pitot tubes 09.03 Digital vane anemometer FVAD
More informationDial Test Indicators SERIES 513
Dial Test s SERIES 513 Description of Icon Icon Description With revolution counter Long contact point Jeweled bearing Double scale spacing, easy to read Compact Dustproof Anti-magnetic FEATURES Narrow
More informationWEIGH SYSTEM WS 2 / 5 / 7 kg M CD with Weighing Electronics Unit EWK 3010 / 3015 TS
GENERAL DESCRIPTION The WS 2 kg M CD, WS 5 kg M CD and WS 7 kg M CD (Clean Design) weigh systems, with their integrated infeed and outfeed belts, form, in conjunctions with a type EWK 3010 or EWK 3015
More informationRODLESS CYLINDER SERIES PU ACTUATORS
RODLESS CYLINDER SERIES PU 1 RODLESS CYLINDER SERIES PU RODLESS CYLINDER SERIES PU Series PU rodless cylinders have an internal strip for longitudinal tightness made of polyurethane (PU) with a harmonic
More informationHigh-speed doors for modern parking systems EFA-SST PS
High-speed doors for modern parking systems EFA-SST PS 02 EFA-SST PS The fastest parking system door in the world. A glance at the advantages of the EFA-SST PS: At least 200,000 operating cycles a year
More information3/2 Way Valve G1/8. Data Sheet No E. Characteristics Symbol Unit Description General Features Spool valve.
AP64E00DX00X Characteristics to VDI 90 Pressures quoted as gauge pressure Characteristics Symbol Unit Description General Features Spool valve Mounting screws M Tube connection Thread Port size ; 7.4 deep
More informationPAHT pump PAHT X
MAKING MODERN LIVING POSSIBLE Data sheet PAHT pump PAHT X 674 444 danfoss.high-pressurepumps.com Table of Contents 1. Introduction...3 2. Benefits...3 3. Application areas...3 4. Technical data...4 5.
More informationGripping rotary modules.
Gripping rotary modules Gripping rotary modules GRIPPING ROTARY MODULES Series Size Page Gripping rotary modules RP 314 RP 1212 318 RP 1216 322 RP 1520 326 RP 2120 330 RP 2128 334 RC 338 RC 1212 342 RC
More informationMontage- und Bedienungsanleitung Installation and Operating Instructions
Montage- und Bedienungsanleitung Installation and Operating Instructions Wind VDO Kienzle Vertrieb und Service GmbH Installation and Operating Instructions Page 22-40 21 22 Table of contents CONTENTS Preface..........................................
More information01 09 Installation guidelines Air suspension units GL70 GL70HD GL70L GN Air suspension units GL70 GL70HD GL70L
01 09 Installation guidelines Air suspension units GL70 GL70HD GL70L GN0031-1 Air suspension units GL70 GL70HD GL70L can be identified by the hanger brackets with a welded-on support for the eccentric
More informationFACTORY AUTOMATION MANUAL ENI11HD
FACTORY AUTOMATION MANUAL ENI11HD Heavy-Duty Incremental Rotary Encoder With regard to the supply of products, the current issue of the following document is applicable: The General Terms of Delivery for
More informationCylinder Pressure Sensor
Pressure Cylinder Pressure Sensor 6613CG... for On-Line Combustion Control Piezoelectric pressure with galvanic isolated 4 20 ma output signal for continuous cylinder pressure measurement for medium and
More information