Door Locks Overview of new products now available in the mgard range
|
|
- Cody Gaines
- 5 years ago
- Views:
Transcription
1 Forced Safety Key Extraction Interlock Control Isolation Hygienic Double Door Interlock Door Locks Overview of new products now available in the DM2E - DMS2E DMSK2 Mini Solenoid Controlled Key Switch (back of board) Mini Solenoid Controlled Key Switch (in enclosure) S-Key switch WP (water proof) MSS MSSR S-WP Key Switch (in metal enclosure) mgard to amgardpro Link Adaptor Control Isolation Accessories SR LOK LINK
2 DM2E, DMS2E Forced Safety Key Extraction Door Interlock Power and Control Isolation Key Exchange Door Locks and Actuators» Forced Safety Key Extraction Door Interlock DM2E-CLIN* DMS2E-CLSS *Note - Head unit will remain stainless steel with dust cap. Forced Safety Key Extraction Door Interlock No product handing issues: 4 head rotation angles with an adjustment of 360 at 90 increments with +/-5 fine adjustment Two actuator entry points Stainless Steel Construction head unit Door will not open until safety key has been removed. Any combination of isolation/access keys possible Sequential or Non-sequential key operation Simply add modules to existing configurations Tamper resistant head mechanism Choice of actuator XMS modules can be added for system expansion Dust caps supplied as standard on head unit mgard is the ultimate range of robust mechanical trapped key products. Trapped key technology offers purely mechanical access locks (removing the need for expensive wiring). mgard offers an extensive variety of modular interlocking solutions. Suitable for use in applications up to SIL3 (EN/IEC 62061),Category 4 and PLe (EN/ISO ), mgard is ideal for use in harsh environments and is tested to 1,000,000 operations. Housing Materials Body DMS Head Internals DM DMS Key Full Stainless Steel Full Stainless Steel Full Stainless Steel Die-cast zinc body with stainless operating mechanism (selected seperatly) Full Stainless Steel Stainless Steel (purchased seperately) Article Codes Nº of Locks Full Stainless Steel Part Nº 2» 5 DM2E» DM5E DMS2E» DMS5E Lock & Key Type Keys must be specified separately Actuator Type Actuator type must be specified separately Product Dimension A Dimension B Dimension C Overall length Nº of slotted holes Nº of CL locks DM2E DM3E DM4E DM5E Dimensional Drawing M_DM2E_V1.0_OCT12
3 DMSK Hygienic, Double Door Interlock Power and Control Isolation Key Exchange Door Locks and Actuators» Double Door Interlock DMSK2 DMS1 Double Door Interlock The DMSK2 is a robust interlock intended for hygienic areas and suitable for all types of doors. Minimal design to reduce dirt traps. No product handing issues: 4 head rotation angles with an adjustment of 360 at 90 increments. Two actuator entry points Full stainless steel assembly Tamper resistant head mechanism Choice of actuator mgard is the ultimate range of robust mechanical trapped key products. Trapped key technology offers purely mechanical access locks (removing the need for expensive wiring). mgard offers an extensive variety of modular interlocking solutions. Suitable for use in applications up to SIL3 (EN/IEC 62061),Category 4 and PLe (EN/ISO ), mgard is ideal for use in harsh environments and is tested to 1,000,000 operations. Article Codes Nº of Locks (Full Stainless Steel) Part Nº 2 DMSK2 Lock Type Key and lock types must be specified separately Actuator Type Actuator type must be specified separately Housing Materials Body Head Internals Key Full stainless steel Full stainless steel Full stainless steel CLS or MLS lock types are full stainless steel Stainless steel (selected separately) Dimensional Drawing M_DS_E_DMSK2_V1.0_DEC11
4 Power & Control Isolation Mini Solenoid Controlled Key Switch (back of board) The mini SS unit is used where the key needs to remain trapped until an electrical signal has been received, where space is limited. Back of Board (BOB) - This unit can be fixed behind a machine control panel. Weatherproof (BOB) - This unit is IP67 rated. Switch Approvals Mini Solenoid Controlled Key Switch Fits within a 65mm(w) x 95mm(L) x 55mm(H) envelope. Suitable for machines with a rundown cycle. The standard sequence is: Solenoid de-energised - Key trapped, Solenoid energised - Key free (other sequences available upon request). 2 x NC 3A Key monitoring contacts. 2 x NC 3A Solenoid monitoring contacts. Mounting Plate B10d 5,000,000 Solenoid Power Rating Solenoid Voltages Zinc plated mild steel Die-cast zinc body with stainless steel 12W (current at Nominal 24V DC = 500mA) 24V DC 48V DC 110V AC / 110V DC 230V AC Part No. / Ordering Information No. of Locks Part No. 1 MSS1 / MSS1WP Lock Types CL/ML Solenoid Voltage 24V DC D024 48V DC D V AC / 110V DC A110 / D V AC A230 * Key and lock types must be specified seperately Dimensional Drawing - MSS (BOB) mss
5 Power & Control Isolation Mini Solenoid Controlled Key Switch (back of board) Dimensional Drawing - MSS (BOB) - Weatherproof Version
6 Power & Control Isolation Mini Solenoid Controlled Key Switch in enclosure The mini SSR unit is used where the key needs to remain trapped until an electrical signal has been received and where space is limited. When the signal is received the push button illuminates. On pressing the illuminated push button the key is released. The solenoid release push button can be laser marked upon request with 2 lines of text containing no more than 8 characters per line. Switch Approvals Mini Solenoid Controlled Key Switch IP67 Laser marking available on push button on request. Suitable for machines with a rundown cycle. The standard sequence is: Solenoid de-energised - Key trapped, Solenoid energised - Key free (other sequences available upon request). 2 x NC 3A Key monitoring contacts. 2 x NC 3A Solenoid monitoring contacts. Enclosure B10d 5,000,000 Solenoid Power Rating Solenoid Voltages Painted die-cast zinc Die-cast zinc body with stainless steel 12W (current at Nominal 24V DC = 500mA) 24V DC 48V DC 110V AC / 110V DC 230V AC Part No. / Ordering Information No. of Locks Part No. 1 MSSR1 Lock Types CL/ML Solenoid Voltage 24V DC D024 48V DC D V AC / 110V DC A110 / D V AC A230 * Key and lock types must be specified seperately Dimensional Drawing - MSSR mssr
7 S Key Switch WP (water proof) Power and Control Isolation Key Exchange Door Locks and Actuators» Key Switch WP (water proof) S BMS Key Switch WP (water proof) Safety Data The S unit is suitable for isolation or switching current and may be used to isolate power to machinery. IP Rating IP65 IP66 IP67 S-CLIS-A02022WP Seal system is rated to IP67 Direct drive operation - positively opens contacts The standard sequence is: Key trapped - Power on, Key free - Power off (other sequences can be specified) Special switch ratings and/or contact arrangements available on request Standards Certifications EN :2009 EN1088:1996 EN :2008 EN :2012 EN62061:2005 CE marked for all applicable directives Category Cat. 4, PLe (EN/ISO ) and SIL3 (EN/IEC 62061) B10d 5,000,000 Functional safety data DC High 99% (with correct monitoring) mgard is the ultimate range of robust mechanical trapped key products. Trapped key technology offers purely mechanical access locks (removing the need for expensive wiring). mgard offers an extensive variety of modular interlocking solutions. Suitable for use in applications up to SIL3 (EN/IEC 62061),Category 4 and PLe (EN/ISO ), mgard is ideal for use in harsh environments and is tested to 1,000,000 operations. Mounting Plate Key Plastic injection moulding with integrated O-Ring seal. Die-cast zinc body (optional stainless steel) operating mechanism (selected separately) Stainless steel (selected separately) Article Codes Mounting Part Nº Back of Board Lock Type CL Lock no dustcover CL Lock with stainless steel dustcover Stainless Steel CL Lock with Stainless steel dustcover ML Lock no dustcover ML Lock with stainless steel dustcover Stainless Steel ML Lock with Stainless steel dustcover S CLIN CLIS CLSS MLIN MLIS MLSS Switch Current Part Nº 20A 32A 63A A020 A032 A063 Switch Contacts Part Nº 4NO/0NC 40 2NO/2NC 22 Dimensional Drawing - S-CLIS-A02022WP Type Water proof Wiring Diagram - Key Free WP 4NO/0NC NO/2NC M_DS_E_S_WP_V1.0_MAY13
8 SR Key Switch (in metal enclosure) Power and Control Isolation Key Exchange Door Locks and Actuators» Key Switch (in metal enclosure) SR BMS Key Switch (in metal enclosure) The SR unit is suitable for isolation or switching current and may be used to isolate power to machinery. Direct drive operation - positively opens contacts The standard sequence is: Key trapped - Power on, Key free - Power off (other sequences can be specified) Special switch ratings and/or contact arrangements available on request Robust metal enclosure IP 65/66/67 rated Safety Data Standards Certifications EN :2009 EN1088:1996 EN :2008 EN :2012 EN62061:2005 CE marked for all applicable directives Category Cat. 4, PLe (EN/ISO ) and SIL3 (EN/IEC 62061) Functional safety data B10d 5,000,000 DC High 99% (with correct monitoring) mgard is the ultimate range of robust mechanical trapped key products. Trapped key technology offers purely mechanical access locks (removing the need for expensive wiring). mgard offers an extensive variety of modular interlocking solutions. Suitable for use in applications up to SIL3 (EN/IEC 62061),Category 4 and PLe (EN/ISO ), mgard is ideal for use in harsh environments and is tested to 1,000,000 operations. Article Codes Mounting Part Nº In enclosure (IP65/66/67) SR Lock Type Key and lock types must be specified separately Switch Current Part Nº 20A A020 Enclosure Key Ingress Protection Dimensional Drawing Die-cast zinc Die-cast zinc body with stainless steel operating mechanism (selected separately) Stainless steel (selected separately) IP65/66/67 Switch Contacts Part Nº 4NO/0NC 40 2NO/2NC 22 Wiring Diagram 4NO/0NC NO/2NC M_DS_E_SR_V1.0_APR13
9 Adaptor LOK Link - mgard to amgardpro Link Adaptor This module allows mgard components to be linked directly to prolok and prostop units in the amgardpro range, and in doing so adds a directly attached safety switch and direct solenoid control option to the. LOK Link - mgard to amgardpro Link Adaptor Materials All Stainless Steel Possible Configurations Electrical indication of bolt position (BM to prostop). Full stainless steel head and locks for amgardpro range (DMS to prolok or prostop). Head for small radius doors (DM to prolok or prostop). Stainless steel head and locks for explosion proof environments (DMS to prostopux or prostopex). IP65/6/7 monitored exchange box (XM_ to prostop). IP65/6/7 Solenoid controlled exchange box (XM_ to prolok). Solenoid controlled bolt lock (BM to prolok). Part No. / Ordering Information Part No. Description Link mgard to amgardpro Link Adaptor Adaptor Dimensional Drawing BM-CLIN-LINK-ST401 BM1-CLIN-LINK-SL411 XM4-CLIN-LINK-ST401 DMS1-CLSN-LINK-EX401 DM2-CLIN-LINK-SL411
PAGE 88 FORTRESS MGARD
PGE 88 FORTRESS MGRD MGRD WHT IS MGRD mgard is the premier range of modular robust trapped key interlocks for heavy duty applications. trapped key interlocking is a tried and tested method of mechanically
More informationDMR & DMSR. Product Data Sheet. Modular Door Lock with Rotary Switch. Description
page 1 of 8 Product Data Sheet DMR & DMSR Modular Door Lock with Rotary Switch Description The DMR and DMSR (full stainless steel version) are robust, modular access interlocks, complete with rotary switches
More informationActuator (DM-F Shown) DM1-CLIN-F
Product Data Sheet DM4-CLIN-F page 1 of 5 DM & DMS Door Module with multiple access locks Description The DM and DMS (full stainless steel version) are robust, modular access interlocks suitable for use
More informationXMR & XMSR Modular Key Exchange Units with Rotary Switches
page 1 of 9 Product Data Sheet XMR & XMSR Modular Key Exchange Units with Rotary Switches Description The XMR and XMSR (full stainless steel version) are modular key exchange units. These units are fitted
More informationProtecting People, Industry and Productivity
Protecting People, Industry and Productivity Modular Gate Switches amgards40 Modular Gate Switches amgards40 is the latest range of safety interlock switches from Fortress Interlocks. Manufactured in 316
More informationBMR & BMSR. Product Data Sheet. Modular Bolt Lock with Rotary Switch
page 1 of 5 Product Data Sheet BMR & BMSR BMR1-CLIN- A006-02040S Sealed Panel Mounted Modular Bolt Lock with Rotary Switch Description The BMR is a robust, modular mechanical bolt interlock complete with
More informationData Sheet. AmLok.
Data Sheet AmLok options: amgard safety gate switch solutions consist of a range of Control interlocks. The control Interlocks are split into gate switches (Stops) and solenoid Interlocks (Loks). Combining
More informationSKORPION Trapped Key Interlocking with Key Exchange THE SKORPION RANGE - AVAILABLE IN STAINLESS STEEL 316 OR DIE CAST:
THE SKORPION RANGE - AVAILABLE IN STAINLESS STEEL 316 OR DIE CAST: ISOLATION KEY EXCHANGE INTERLOCKING 254 ISB1 PRODUCT OVERVIEW: The SKORPION Trapped Key System has been developed to provide extremely
More informationSKORPION Trapped Key Interlocking with Key Exchange THE SKORPION RANGE - AVAILABLE IN STAINLESS STEEL 316 OR DIE CAST:
THE SKORPION RANGE - AVAILABLE IN STAINLESS STEEL 316 OR DIE CAST: ISOLATION KEY EXCHANGE INTERLOCKING 208 ISB1 SS-KE-NS4 SS-TS PRODUCT OVERVIEW: The SKORPION Trapped Key System has been developed to provide
More informationproat Head Options & Ordering Information Part Number Item No. Description T6 ITM proat Head
Head Modules proat Head & Tongue Actuator proat Head & Tongue Actuator Heavy duty tongue unit. Ideal for fast, frequent access. 4 position fixing at 90 increments allowing on site handing change. Misalignment
More informationKSS Solenoid Controlled Switch
S20-FSB-F-CC4-110A The KSS is a heavy-duty solenoid controlled key driven electrical switch interlock ideal for the controlled isolation or switching of low current. This product is used where a process
More informationApplication Guide. Total Access & Control
Application Guide Introduction A market leader Fortress Interlocks design and manufacture safety interlock systems for a wide variety of industrial applications. Fortress Interlocks is a market leader
More informationIDEM Solenoid Interlock Safety Switches
KLP/KLM/KL3-SS Series Housing Solenoid locking, tongue (key) interlock operated Power to unlock 90 degree adjustable head One (KLP) or three (KLM, KL3-SS) 1/2 in. female NPT conduit opening 30mm mounting
More informationSpecifications. Safety Ratings. Standards. Safety Classification. Certifications. Power Supply
Safety Guard Locking Atlas 5 General 1-2-Opto-electronics 3-Interlock Logic Description The Atlas 5 is a positive-mode, tongue-operated guard-locking interlock switch that locks a machine guard closed
More informationF3S-TGR-KHL1/-KHL3/-KHL3R
Safety guard-lock door switches with full stainless steel body F3S-TGR-KHL1/-KHL3/-KHL3R The F3S-TGR-KHL3 safety-door switch keeps medium to large guard doors closed until hazards have been removed. It
More informationUniversal Gate Box with Safety Interlocking TYPE: UGB-KLT FEATURES & APPLICATION:
SECTION 6 Universal Gate Box with Safety Interlocking TYPE: UGB-KLT FEATURES & APPLICATION: 78 Application: IDEM Universal Gate Boxes (UGB-KLT) provide high level RFID coded interlocking and machine control
More informationDatasheet. Electrical Switching / Locking
- Standard, Power to Lock,ASi, Un-Monitored and Individual Safety Circuits + Extended Solenoid Controlled Body is used to manage activities by means of a solenoid control element. There are five basic
More information3-36. General 1-2-Opto-electronics 3-Interlock. Switches. Operator. Interface. Logic Power. Safety Switches Guard Locking Switches 440G-MT
Safety Guard Locking 440G-MT General 1-2-Opto-electronics 3-Interlock Logic Description The 440G-MT solenoid switch is a positive mode, tongue operated guard locking interlock switch that locks a machine
More informationPosition Switches Series 8060/2
www.stahl.de > Ex e plastic enclosure > Operating temperature range -60 to +60 C > Dimensions and characteristic values according to EN 50047 > Degree of protection IP66 / IP67 > Extensive assortment of
More informationMulti Key Solenoid Controlled Switch User Manual - Original Language Version
E20-FSS-3D-F-C/O4-110A The KSSE is a solenoid controlled, multi-key electrical switch for the controlled isolation of low current. This product is used where the controlled isolation of a machine needs
More informationPosition Switches Series 8074/2
www.stahl.de > Ex e metal enclosure > Operating temperature range -40 C... +70 C > Dimensions and characteristic values according to EN 50041 > Degree of protection IP66 > Extensive assortment of actuators,
More informationPosition Switches Series 8070/2
www.stahl.de > Ex e plastic enclosure > Operating temperature range -60 to +60 C > Dimensions and characteristic values according to EN 50041 > Degree of protection IP66 / IP67 > Extensive assortment of
More informationKSUPS + Solenoid Controlled Switch
KSUPSP-FSB-P-CO4 The KSUPS + is a solenoid controlled trapped key interlock. It is primarily used in uninterruptable power supply (UPS) systems. The KSUPS + ensures that access can only be gained once
More informationE Range of Electro - Hydraulic Linear and Rotary Actuators. Technical Specification.
E Range of Electro - Hydraulic Linear and Rotary Actuators Technical Specification www.advanced-actuators.com Basic Design Concept Please note this brochure is purely an overview of our product range.
More informationUniversal Gate Box with Safety Interlocking TYPE: UGB-KLT FEATURES & APPLICATION:
SECTION 6 Universal Gate Box with Safety Interlocking TYPE: UGB-KLT FEATURES & APPLICATION: 70 Application: IDEM Universal Gate Boxes (UGB-KLT) provide high level RFID coded interlocking and machine control
More informationMulti Key Powersafe Electrical Switch User Manual - Original Language Version
KSE20-FSS-2S-F-E-C/O4 The KSE is a multi-key controlled electrical switch suitable for the isolation or switching of 20, 32, 63 or 150 amp (maximum) current.this type of isolator should be used for short
More informationSafety switches with solenoid and separate actuator
Safety switches with solenoid and separate actuator These switches are used on machines where the hazardous conditions remain for a while, even after the machines have been switched off, for example because
More informationSpecifications. Safety Ratings. Standards. Safety Classification. Certifications. Safety Contacts. Locking Type. Power Supply. Operating Radius, Min
Safety Guard Locking TLS- General 1-2-Opto-electronics 3-Interlock Logic Description The TLS- is a positive mode, tongue operated guard locking interlock switch that locks a machine guard closed until
More informationHeavy Duty Solenoid Controlled Access Lock. User Manual - Original Language Version
OLYM-S24D-C24D The Olympus 4HD is a heavy duty solenoid controlled access lock available with either a stainless steel tongue actuator or a heavy duty handle. The Olympus 4HD is capable of supporting Category
More informationOperator Interface 4-1. General. Safety Switches. 4-Table of. Contents. Logic. Power. Operator Interface Table of Contents. 2-Opto-electronics
Table of Contents Emergency Operator Interface Overview...4-2 LIfeline ope Tensioner System (LTS)...4-4 Lifeline 3...4-6 Lifeline 4...4-10 Lifeline 4 Stainless Steel...4-16 Enabling Switches GripSwitch...4-24
More informationGKR/GKL Series Dual Entry Solenoid Key Operated Safety Interlock Switch
Series Dual Entry Solenoid Key Operated Safety Interlock Switch FEATURES Solenoid power to lock or power to unlock Side or top key entry Separate switches for key position and solenoid status Available
More informationMICRO SWITCH Solenoid Safety Interlock Switches GKL/R Series Issue 2. Datasheet
MICRO SWITCH Solenoid Safety Interlock Switches GKL/R Series DESCRIPTION MICRO SWITCH GKL/R Series switches are a heavy-duty key operated solenoid safety interlock switch incorporating a key trapping mechanism.
More informationF3S-TGR-KM15/-KM16/-KH16
Safety door switches with partially or full stainless steel body F3S-TGR-KM1/-KM16/-KH16 This safety door switches use a stainless steel head or even a full stainless steel body to increase the robustness.
More informationCut out PRODUCT CODE HANDLE BODY FINISH MATERIAL MODUL. 5 mm Double bit 8 mm Square 9 mm Triangular Button. Stainless steel dust cap (Keyed alike) 03
ROD-LATCH SYSTEM LINEAR HANDLE LOCK 204 V : 1 With mechanism Cut out Ergonomic and modern design Locking and unlocking by linear movement Suitable for inside & outside gasketing applications Swing handle
More informationRecommended use With its standard enclosure, the ENM2 limit switch can be used universally in all industrial and safety applications.
Metal-Enclosed Limit Switches ENM2 Recommended use With its standard enclosure, the ENM2 limit switch can be used universally in all industrial and safety applications. Product advantages Standard switch
More informationMetal Position Switch Series 8074
> Dimensions and characteristic values according to EN 50041 > Replaceable contact element in flameproof enclosure > Positive opening contacts > Wide range of actuators > All actuators can be displaced
More informationMKey9-series Safety Interlock Switch with Guard Locking
Original instructions MKey9-series Safety Interlock Switch with Guard Locking ABB AB / Jokab Safety Varlabergsvägen 11, SE-434 39 Kungsbacka, Sweden www.abb.com/jokabsafety Read and understand this document
More informationNHP SAFETY REFERENCE GUIDE
NHP SAFETY REFERENCE GUIDE PRODUCTS Trapped Key Interlocks Rotary Switches and Isolators Features: 316L Stainless steel keys Direct drive operation - positively opens contacts IP 65 rated enclosure - water
More informationIDEM MPC Non-Contact Coded Magnetic Safety Switches MPC Series Plastic Housing
IDEM MPC Non-Contact Coded Magnetic MPC Series Plastic Housing MPC-114105 Coded magnetic actuation Compact yet robust fitting suitable for all small guard applications Hygenic screw cap covers ensure suitability
More informationSafety switches with separate actuator
Safety switches with separate actuator Selection diagram VF KEYD VF KEYD1 VF KEYD VF KEYD VF KEYD5 VF KEYD6 VF KEYD7 VF KEYD8 VF KEYD10 VF KEYD11 ACTUATORS CONTACT BLOCKS FR FX FK FW 5 6 7 11 1 14 NC NC
More informationSafety switches with separate actuator
Safety switches with separate actuator Selection diagram VF KEYD VF KEYD1 VF KEYD VF KEYD VF KEYD5 ACTUATORS VF KEYD6 VF KEYD7 VF KEYD8 VF KEYD10 VF KEYD11 FR FX FK FW 5 6 7 11 1 14 NC NC slow action slow
More informationGate Box with Safety Interlocking & RFID UGB-KLT Operating Instructions
UGB4-KLT with Sliding Handle Gate Box with Safety Interlocking & RFID UGB-KLT Operating Instructions UGB2-KLT Application: The UGB-KLT Gate Box (incorporating an RFID interlock switch) is designed to fit
More informationPneumatic Actuators. 1. DIE CAST ALUMINUM END CAPS: standard polyester powder coated
4 5 Pneumatic s 1 2 6 NOMINAL VALUES: Pressure rating max 115 PSI Temperature range: standard (-4 F;+185 F), high (-4 F;+302 F), low (-40 F;+185 F) Pre lubricated for life of actuator at assembly 100%
More informationLR-LX-LK-LW Safety Switches with separate actuator
LR-LX-LK-LW Safety Switches with separate actuator Technopolymer housing, from one to three conduit entries Protection degree IP67 15 contact blocks available 8 stainless steel actuators available Versions
More informationSafety switches with solenoid and separate actuator
Safety switches with solenoid and separate actuator These switches are used on machines where the hazardous conditions remain for a while, even after the machines have been switched off, for example because
More informationSIGUARD Safety Systems Safety Integrated
/ 3SE2 303 / 3SE2 404 and open type SIGUAR Safety Systems Safety Integrated Application The function of the position switches (limit switches) is to produce electrical signals corresponding to the positions
More informationIP69K Stainless Steel Safety Interlock Switches
IP69K Stainless Steel Safety Interlock Switches Designed specifically for Food Processing, Packaging, Pharmaceutical and Petro-Chemical industries Suitable for CIP Cleaning Fully Stainless Steel IP69K
More informationEStrong-series Emergency Stop
Original instructions EStrong-series Emergency Stop ABB AB / Jokab Safety Varlabergsvägen 11, SE-434 39 Kungsbacka, Sweden www.abb.com/jokabsafety Read and understand this document Please read and understand
More informationSolenoid interlocks AZM 190 range. 128 Schmersal ,3 4,5 M20 17,5 23,5
2.19 AZM 19 range 13 44 32 2,3 3 1 Features Voltage variants Approvals Thermoplastic enclosure Manual / Emergency release Long life Actuation on de-energisation or energisation Slim design, particularly
More informationSafety Switches Machine Safety
Safety Switches Machine Safety We develop products and solutions for machine safety The fact that the leading power and automation technology company, ABB, and a leader in machine safety, Jokab Safety,
More informationCompact enclosures AE
Compact enclosures AE Material: 1.4301 (AISI 304) Mounting plate: Sheet steel Cam lock: Die-cast zinc, nickel-plated Surface finish: Brushed, grain 40 Mounting plate: Zinc-plated Protection category: IP
More informationPlugs and Sockets SolConeX & CES Series 7570, 7571, 7575, 7579, 7581
Plugs and Sockets SolConeX & CES Series 7570, 7571, 7575, 7579, 7581 www.stahl.de > For use in Zones 2 and 22 > Various versions 16 A, extra-low voltage 16, 32, 63, 125 A > Large handle, can be locked
More informationMotion Sensing Interlock User Manual - Original Language Version
The MSI is designed to control access to rotating machinery that has a run-down time. The MSI relies on the detection of motion via two sensors. Only when both sensors detect zero movement can the key
More informationSensor boxes SRBE Key features and product range overview
Sensor boxes SRBE Sensor boxes SRBE Key features and product range overview Function Sensor boxes SRBE are used for electrical feedback and control of the position of process valves actuated using pneumatic
More informationFeatures. Flexibility
The V100 positioner can be ordered as a base model pneumatic positioner, converted to standard NEMA 4X electropneumatic, EX model, or FF (fail freeze) model in a matter of minutes, without removing the
More informationLevel Measurement Point level measurement - RF Capacitance switches
Pointek CLS200 - Standard Overview Configuration Installation Pointek CLS200 (standard version) is a versatile inverse frequency shift capacitance level and material detection switch with optional rod/cable
More informationSITRANS P measuring instruments for pressure
Overview Application The pressure transmitter is designed for the special requirements of the food, pharmaceutical and biotechnology industries. The use of high-grade materials guarantees compliance with
More informationPlugs and Sockets SolConeX & CES Series 8570, 8571, 8575, 8581
www.stahl.de > Various versions Extra-low voltage up to 16 A 16, 32, 125 A > Large handle, can be locked in position 0 and I > Clear switch position indication > Optimal contact by means of self-cleaning
More informationSolenoid interlock AZM 200 The non-contact interlock.
Solenoid interlock AZM 200 The non-contact interlock. Solenoid interlock AZM 200 The non-contact Solenoid interlocks demand accurate alignment of actuator and device. This requirement is met on new machinery.
More informationSolenoid interlocks AZM 161 range Schmersal. a 5,5. Pg11/M16x1,5
.1 AZM 11 range Features Thermoplastic enclosure Manual and emergency release Long life Double insulated X High holding force, N N latching force Wiring compartment Actuation on de-energisation or energisation
More informationClarian uk ltd SWITCHES AND CONTROLS TOP-TECHNIC TOP-TECHNIC TOP-TECHNIC TOP-TECHNIC TOP-TECHNIC TOP-TECHNIC.
SWITCHES AND CONTROLS TOP-TECHNIC TOP-TECHNIC CONTROL UNITS SWITCH DISCONNECTORS & CAM SWITCHES TOP-TECHNIC TOP-TECHNIC EMERGENCY STOP MAIN SWITCHES MAIN SWITCHES TOP-TECHNIC TOP-TECHNIC CAM SWITCHES FOR
More informationD o o r I n t e r l o c k s
D o o r I n t e r l o c k s HST 03_08 EN Haake Technik GmbH - Master Esch 72-48691 Vreden Germany - Tel. +49-0 25 64-39 65-0 - Fax +49-0 25 64-39 65-90 C O N T E N T S B R I E F D E S C R I P T I O N Brief
More information3-Way Solenoid Valve - Direct Acting
3-Way Solenoid Valve - Direct Acting General application valves for dry or lubricated air, neutral gases and liquids Description: Applications: 3-Way Solenoid Valve - Direct Acting - Normally Closed. Coil
More informationDatasheet - TV8S /20Z Safety switch for hinged guards / Hinge safety switch / TV8S 521
Datasheet - TV8S 521-02/20Z Safety switch for hinged guards / Hinge safety switch / TV8S 521 Metal enclosure Good resistance to oil and petroleum spirit Mounting independent of hinge 92 mm x 81,5 mm x
More informationSolenoid interlocks AZM 170 range. 98 Schmersal 22 8,2 60. ø4,2. ø Pg 11
2.4 AZM 170 range Features Thermoplastic enclosure Compact design Manual release Long life Double insulated X High holding force 1,000 N N latching force Cut clamp termination Actuation on de-energisation
More informationSafety Interlock Switch with Guard Door Locking. Narrow profile enables mounting to 2 in. square tubing or in applications with space restrictions
C R US Conforms to EN1088, EN60947-5-1, EN292, EN60204-1 UL and C-UL listed, B approved TL4024 Safety Interlock Switch with uard Door Locking High locking force of 1500 N (7 lb.) locks guard door shut
More informationAPS & APIS ATEX AIRPOWER SWITCH BOXES FEATURES DESCRIPTION
page 1 DESCRIPTION The switch boxes are suitable for rotary actuators and are the industry leader in versatility, quality and approvals gained. Models include APS standard range with a variety of outputs
More informationProviding Machine Safety for YOU at Work. Designed and Manufactured in the United Kingdom
Providing Machine Safety for YOU at Work Designed and Manufactured in the United Kingdom The history of IDEM - back to where it all started IDEM s UK Manufacturing Base IDEM's UK-based facility for research
More informationAn Investment in Plant Floor Safety. 802C Safety Cable Pull Switches 802E Hinge Safety Interlock Switches 802F Safety Interlock Switches
An Investment in Plant Floor Safety 802C Safety Cable Pull Switches 802E Hinge Safety Interlock Switches 802F Safety Interlock Switches Notes 2 802C Cable Pull Safety Switches Safety and Application Safety
More informationLoad disconnect switch Series 8146/5-V11
www.stahl.de Load disconnect switch > Motor switching capacity AC-3 and AC-23 acc. to DIN VDE 0660 part 107 IEC/EN 60947-3 > Isolating characteristics acc. to IEC/EN 60947-3 > Positive opening operation
More informationLevel Measurement. Point level measurement Capacitance switches. Pointek CLS200 Standard. 4/18 Siemens FI Overview.
Pointek CLS200 Standard Overview Configuration Installation Pointek CLS200 (standard version) is a versatile inverse frequency shift capacitance level switch with optional rod/cable choices liquids, solids,
More informationSense7-series Non-contact coded safety switch
Original instructions Sense7-series Non-contact coded safety switch ABB AB / Jokab Safety Varlabergsvägen 11, SE-434 39 Kungsbacka, Sweden www.abb.com/jokabsafety Read and understand this document Please
More information-V- New. Valve series VOFC. 2009/08 Subject to change Internet:
Valve series VOFC 2009/08 Subject to change Internet: www.festo.com/catalogue/... 159 Solenoid valves VOFC Key features General information The valves in the VOFC series are special 3/2-way and 5/2-way
More information3SE3 1 SIGUARD Position Switches
3SE3 SIGUARD Position Switches Metal-enclosed, with Moulded Cable Description Technical data Description In harsh industrial environments and in installations with limited space, the small 3SE3 6 and 3SE3
More informationKirk Key Interlock Company
Kirk Key Interlock Company 9048 Meridian Circle NW, North Canton, OH 44720 Phone: 234.209.9301 Fax: 330.497.4400 Toll Free: 1.800.438.2442 www.kirkkey.com Table of C ont ents : Type SKPM... Page 2 Type
More informationQ u a r t e r T u r n E l e c t r i c A c t u a t o r s
Quarter Turn Electric Actuators A101/04 2 Q uarter-turn actuators are used to operate ball, plug or butterfly valves, dampers, vents and any equipment with quarter-turn or part turn travel. BERNARD has
More informationHeavy Duty Solenoid Controlled Access Lock. User Manual - Original Language Version
OLYM-S24D-C24D The Olympus 4HD is a heavy duty solenoid controlled access lock available with either a stainless steel tongue actuator or a heavy duty handle. The Olympus 4HD is capable of supporting Category
More informationLevel Measurement. Point level measurement Capacitance switches. Pointek CLS200 Standard. icenta Controls Ltd
Pointek CLS200 Standard Overview Configuration Installation Pointek CLS200 (standard version) is a versatile inverse frequency shift capacitance level switch with optional rod/cable choices liquids, solids,
More informationLIMIT SWITCH BOX MODEL - APL
FEATURES AND BENEFITS Enclosure -Solid design, aluminium die-casting IP67 Painting-Powder coating Housing Body- Aluminium die-casting Quick-set Cam-Easy to set, Splined cam Open Yellow, Close Red Various
More informationOMNIA System OMNIA SYSTEM - IP55 FLUSH AND SURFACE MOUNTING MODULAR SYSTEM. t. 50
OMNIA System OMNIA SYSTEM - IP55 FLUSH AND SURFACE MOUNTING MODULAR SYSTEM The flush mounting box, which is suitable for walled installations, can be combined both horizontally and vertically with any
More informationMotion Sensing Interlock User Manual - Original Language Version
BEMF-FSB-F-3-110A The BEMF Motor sensing Interlock is designed to control access to rotating machinery. The BEMF unit relies on the measurement of the electromotive force generated by the windings of an
More informationSafety interlock switch MKey
Safety interlock switch MKey MKey are mechanical safety switches used for monitoring doors and hatches. The switch is mounted on the frame and the actuator key on the moving part of the guard. All MKey
More informationGas-actuated thermometer with switch contacts Model 73, stainless steel version
Mechatronic temperature measurement Gas-actuated thermometer with switch contacts Model 73, stainless steel version WIKA data sheet TV 27.01 for further approvals see page 12 Applications Control and regulation
More informationSPECIAL DUST EXPLOSIVES ATMOSPHERES
SPECIAL DUST EXPLOSIVES ATMOSPHERES Explosive atmospheres Main sectors of activity subject to a higher risk of explosion or fire Flour mills Wood and aluminium workshops A reference for installations in
More informationLevel instruments. Continuous level measurement - Capacitance transmitters SITRANS LC300. 5/262 Siemens FI Overview.
Overview Configuration is an inverse frequency shift capacitance continuous It is ideal for standard industrial applications in chemical, hydrocarbon processing, food and beverage and mining, aggregate
More informationControl Equipment. ATHEX bvba Tel: +32 (0) Fax: +32 (0) Alpenroosbaan 2, 2900 Schoten, België
Control Equipment 01616E00 Position switches are used to monitor the position of moving parts of machines and plant. Can be used in safety circuits, as the device satisfies EN 60 947-5-1/DIN VDE 0660 part
More informationSafety switches with solenoid and separate actuator
4 Safety switches with and separate Selection diagram VF KEYF20 VF KEYF21 VF KEYF22 VF KEYF28 CTUTORS HED TYPE ND WORKING PRINCIPE D locked with de-energized E locked with energized SIGNING ED B Z two
More informationComponents for safety applications
pages / and /35 page /36 Double insulated, turret head, types CS-PA, CS-TA and CS-TE Cable entries tapped M16 x 1.5 Without locking of actuator 1 -pole N/C + N/O CS-PA59 -pole N/O + N/C CS-PA69 -pole N/C
More informationThe BERNSTEIN CS-3000
Flexible and efficient: The BERNSTEIN CS-3000 Designers and manufacturers expect modern suspension systems to feature variable configuration, progressive design and complete ease installation. BERNSTEIN
More informationIECEx Certificate of Conformity CESI. Annex to certificate: IECEx CES X Issue No.0 of
Prot: B2036032 IECEx Certificate of Conformity CESI CESI Annex to certificate: IECEx CES 12.0007X Issue No.0 of 2012-10-29 Applicant: Electrical Apparatus: ATOS S.p.A. via alla Piana, 57; I - 21018 Sesto
More informationSafety switches for hinges
Safety switches for hinges Selection diagram ACTUATORS L L6 L9 L16 FR FM FX FZ FK CONTACT BLOCKS 6 7 9 14 18 snap action 1NO+1N, make before break, shifted, close 21 4 66 NC 2NO+ 1NO+ CONDUIT ENTRIES Threaded
More informationBelt Scales Speed sensors
Overview is a low- to high-resolution shaft-driven speed sensor. Benefits Compact and economical Easy, low-cost installation Accurate belt speed detection Optional resolutions for measurement over a range
More informationSafety Control HR1S-AC. Safety Relay HR1S-AC
HRS-AC Safety Relay HRS-AC Key features: NC or 2NC safety input type, such as E-Stops or Interlock Switches EN ISO 3849- PLe, Safety Cat 3 compliant, and EN 6206 SIL 3 Fault diagnosis function with dual
More informationPressure Controller. Cataloge K Code Characteristics Index. K00-2 Pressure Controller Brief Introduction
K Pressure Controller Cataloge Code Characteristics Index K00-2 Pressure Controller Brief Introduction KC32 Screw Tube Differential Pressure Controller K01 KY10 Bellows Type Differential Pressure Controller
More informationSPOOL VALVES pilot or air operated, spool type single/dual solenoid (mono/bistable function)
SPOOL VALVES pilot or air operated, spool type single/dual solenoid (mono/bistable function) brass body, NAMUR, / 0 0 /-/ Série FEATURES The monostable spool valves have TÜV certified IEC 608 Functional
More informationGas-actuated thermometer with switch contacts Stainless steel version Model 73
Temperature Gas-actuated thermometer with switch contacts Stainless steel version Model 73 WIKA data sheet TV 27.01 for further approvals see page 12 Applications Control and regulation of industrial processes
More informationINSTRUCTION MANUAL (ATEX / IECEx)
INSTRUCTION MANUAL (ATEX / IECEx) BExBG10D-P and BExBG15D-P Flameproof Xenon Beacons For use in Flammable Gas and Dust Atmospheres BExBG10D-P / BExBG15D-P 1) Warnings DO NOT OPEN WHEN AN EXPLOSIVE ATMOSPHERE
More informationOrdering details. Approval. Classification. Global Properties :18:33h. Solenoid interlock / AZM 161
10.06.2016 10:18:33h Datasheet AZM 161SK 12/12RKED/TU 110/230 Solenoid interlock / AZM 161 Thermoplastic enclosure Double insulated Interlock with protection against incorrect locking. 130 mm x 90 mm x
More informationControl Buttons Series 8082
www.stahl.de > Contact element with 1 NO contact 1 NC contact, positive opening > Contact material silver-nickel or gold-plated > 9 different actuators Push Mushroom push Selector switch Rotary actuator
More informationControl Without Compromise. Suitable for use in hot, cold, wet, dirty, abusive, corrosive, and explosive environments
leverless limit switches Proximity Sensors for Harsh Environments and Tough Applications Suitable for use in hot, cold, wet, dirty, abusive, corrosive, and explosive environments Certified for use in all
More information