Quick Disconnect Couplings for

Transcription

1 Quick Disconnect ouplings for Featuring hemquik High Purity ouplings Photo

2 older Products ompany This hemical Management catalog features older Products most popular and sophisticated products, designed for handling aggressive chemical media. The world leader in plastic quick disconnect technology, older offers you the largest selection available anywhere. Increase Safety, Time-Savings and Profits older couplings have a variety of unique features to help improve your application: orrosion resistant material combinations provide broad chemical compatibility options utomatic shutoff valves allow instant disconnection without draining lines ll plastic couplings and versions with all plastic and spring-free flow paths Pressure-balanced designs allow disconnects and reconnects while under pressure Non-spill designs reduce spillage/air inclusion to < 0.1 ml no more fumes or vapors olor-coding and/or physical keying systems help prevent misconnects of critical lines Integral fitting terminations are more compact, and reduce assembly time and leak points The thumb latch design is easy to use and allows single-handed operation hemquik, winner of these awards Member of hemical Jerry ans, Drums, Is, and Rigid ontainer Systems For extraction of chemicals from jerry cans, drums, I s (totes), and other rigid containers, older offers the DrumQuik MODULR system, a closed system that helps protect operators from fluid or vapor contact. The DrumQuik system can be assembled from off-the-shelf components using any of the older coupling models featured in this catalog. In addition, the new DrumQuik MODULR Universal Drum daptor kits turn any coupling into a dip-tube system. Special Design Features To quickly select the best coupling for your application, look for the colored icons located throughout the catalog to quickly find the coupling series that has the features you want. P Pressure-alanced ouplings: Only available from older, couplings featuring our unique patented Pressure-alanced design have no springs in the flow path, which eliminates the potential for corrosion and results in exceptionally high flow capacity. lso, there is no increase in the force-to-connect as system pressure increases, i.e., the coupling is no harder to connect at high pressure than at ambient pressure. oupling may be disconnected/reconnected under pressure. NS Non-Spill ouplings: ouplings with this symbol feature Non-Spill valves. Spillage upon disconnect and air inclusion upon reconnect are minimized to almost zero typically in the range of 0.1 ml or less, a fraction of standard couplings, even when disconnected under pressure. HP High Purity ouplings: High Purity couplings are manufactured and packaged in a manner that helps preserve the purity of high grade PPM, PP or even PPT chemicals. No lubricants are used in HP couplings. ll hemquik couplings conform to HP specifications. Some models feature all plastic, Pressure-alanced and/or Non-Spill construction. GP General Purpose ouplings: ouplings with this symbol are intended for general purpose chemical handling applications, with emphasis on high performance at the lowest possible cost. Some GP models feature Pressure-alanced and/or Non-Spill construction. Typically GP couplings use a seal lubricant such as Krytox PFPE (inert in virtually all media) or silicone to facilitate long life and low force-to-connect. 2 2 opyright 2006 by older Products ompany. ll rights reserved. older Products ompany, older Products and P are registered trademarks with the US Patent & Trademark Office.

3 hoosing the Right oupling for your pplication To simplify the process of selecting a coupling for your application, we recommend that you first identify the following design parameters, then, proceed to the most appropriate coupling section, using the table located below. 1 What is the required flow capacity in gallons per minute (liters per minute)? 2 What is the acceptable pressure drop at the required flow rate (psid/bar)? 3 What are acceptable materials of construction for main components, springs and seals? 4 What is the required operating pressure and temperature? 5 Is a Non-Spill NS coupling required or is a small amount of spillage acceptable? The trade-off is that a Non-Spill coupling may be a bit larger in size for a given flow capacity rating and may be slightly more costly. 6 re springs located in the flow path acceptable? If NO, choose a Pressure-alanced P coupling. 7 Is a High Purity HP coupling needed or will a General Purpose GP coupling suffice? 8 Is all plastic construction required? re plastic springs located in the flow path acceptable? If YES, only hemquik QH06 and QV06 couplings offer these features. hemquik QG06, QN06, QN08, and NSH have a spring-free, all plastic flow path. NS4, NS6, EF12, and HF12 have 316SS metal springs in the flow path. NEW! DrumQuik Universal Drum daptor Kit WRNING: Pressure, temperature, chemical type and concentration, and operating environment can affect the performance of couplings. It is the customer s responsibility to test the suitability of older products in their own application conditions. NS P GP HP 7 oupling Series *v(kv) Flow 10 psid GPM(LPM) Material Seal Material Spring Material **Op Press. Psig (ar) **Op Temp. F ( ) Non-Spill/ mt in ml Pressure alanced Purity Grade Page Number hemquik QG (46.0) 10.2 (38.6) 16.0 (60.6) Natural Polypro/ PTFE Valve Viton FKM Hastelloy Non-Wetted Vac - 80 (Vac - 5.5) (0-66) YES (< 0.1) YES HP, No Lube Used 9 hemquik QH (23.0) 5.1 (19.2) 8.0 (30.3) Natural Polypro Viton FKM PEEK Wetted Vac - 80 (Vac - 5.5) (0-107) NO (1.5) NO HP, No Lube Used 10 hemquik QV (23.0) 5.1 (19.2) 8.0 (30.3) Natural PVDF hemraz FFKM PEEK Wetted Vac - 80 (Vac - 5.5) (-18-66) NO (1.5) NO HP, No Lube Used 11 hemquik QN (43.1) 9.5 (36.0) 15.0 (56.8) Natural PTFE/ PTFE Valve hemraz FFKM Teflon Encapsulated 316 SST Non-Wetted Vac - 80 (Vac - 5.5) (-18-66) YES (< 0.1) YES HP, No Lube Used 12 hemquik QN (104.9) 23.1 (87.4) 36.5 (138.2) Natural PTFE/ PF hemraz FFKM Teflon Encapsulated 316 SST Non-Wetted Vac - 80 (Vac - 5.5) (-18-66) YES (< 0.15) YES HP, No Lube Used 13 NSH 3.3 (47.4) 10.4 (39.4) 16.5 (62.4) Glass-Filled, Gray Polypro EPDM 316 SST Non-wetted Vac (Vac - 8.3) (0-49) YES (< 0.1) YES GP, Krytox PFPE Used 14 NS6 2.2 (31.6) 7.0 (26.3) 11.0 (41.6) Glass-Filled, Gray Polypro/ TPE case EPDM 316 SST Wetted Vac (Vac - 8.3) (0-71) YES (< 0.1) NO GP, Krytox PFPE Used 16 NS4 0.6 (8.6) 1.9 (7.2) 3.0 (11.4) Glass-Filled, Gray Polypro/ TPE case EPDM 316 SST Wetted Vac (Vac - 8.3) (0-71) YES (< 0.1) NO GP, Krytox PFPE Used 18 HF (28.7) 6.3 (23.9) 10.0 (37.9) Gray, Unfilled Polypro EPDM 316 SST Wetted Vac - 60 (Vac - 4.1) (0-71) NO (1.5) NO GP, Silicone Lube Used 20 EF (12.5) 2.8 (10.4) 4.4 (16.5) Gray, Unfilled Polypro EPDM 316 SST Wetted Vac (Vac - 7.2) (0-71) NO (1.0) NO GP, Silicone Lube Used 22 *FLOW OEFFIIENT (v) is based on imperial units of gpm and psi. FLOW FTOR (Kv) is based on SI/metric units of lpm and bar. v and Kv are related as follows: Kv=14.368xv. **NOTE: Operational pressure rating varies with operating temperature. onsult individual coupling section for detailed pressure/temperature information. Many couplings are rated for vacuum service. Please consult factory for details and ratings. opyright 2006 by older Products ompany. ll rights reserved. older Products ompany, older Products and P are registered trademarks with the US Patent & Trademark Office. 3

4 Smart oupling Technology Table of ontents ouplings connected and shown actual size (approximate). For additional terminations and configurations, see product pages. PGE 8 Smart oupling Technology Overview This section describes how the application of older s innovative RFID electronic data transfer capability can make our couplings safer to use and provide valuable process/tracking information to user systems. High Purity hemquik Series PGE 9 QG06 Series HP P NS QGD & QGD Wetted Material: Natural, Virgin Polypropylene, PTFE, Viton FKM Flow Rating: v 3.2/Kv 46.0 Temperature Rating: F, 0-66 Pressure Rating: Vac-80 psig, 5.5 bar PGE 10 QH06 Series HP QHD & QHD (05 color-coded option shown) Wetted Material: Natural, Virgin Polypropylene, PEEK, Viton FKM Flow Rating: v 1.6/Kv 23.0 Temperature Rating: F, Pressure Rating: Vac-80 psig, 5.5 bar 4 opyright 2006 by older Products ompany. ll rights reserved. older Products ompany, older Products and P are registered trademarks with the US Patent & Trademark Office.

5 High Purity hemquik Series PGE11 QV06 Series HP QVD & QVD Wetted Material: Natural, Virgin PVDF, PEEK, hemraz FFKM Flow Rating: v 1.6/Kv 23.0 Temperature Rating: F, (see note) Pressure Rating: Vac-80 psig, 5.5 bar NOTE: If coupling will be left disconnected while under pressure and temperature, then limit temperature to 150 F, 65. PGE 12 QN06 Series HP P NS QND & QND Wetted Material: Virgin PTFE (modified, Dyneon TFM and/or Teflon NXT 75), hemraz FFKM Flow Rating: v 3.0/Kv 43.1 Temperature Rating: F, Pressure Rating: Vac-80 psig, 5.5 bar PGE13 QN08 Series HP P NS QND & QND (05 color-coding & physical key shown) Wetted Material: Virgin PTFE (modified, Dyneon TFM and/or Teflon NXT 75) and/or PF, hemraz FFKM Flow Rating: v 7.3/Kv (v 9.4/Kv with non-valved insert) Temperature Rating: F, Pressure Rating: Vac-80 psig, 5.5 bar opyright 2006 by older Products ompany. ll rights reserved. older Products ompany, older Products and P are registered trademarks with the US Patent & Trademark Office. 5

6 General Purpose Series PGE 14 NSH Series GP NSHD22006 & NSHD17012 P NS Wetted Material: Glass-Filled, Gray Polypropylene, EPDM Flow Rating: v 3.3/Kv 47.4 Temperature Rating: F, 0-49 Pressure Rating: Vac-120 psig, 8.3 ar NEW! PGE 16 NS6 Series GP NS6D22006 & NS6D17008 NS Wetted Material: Glass-Filled, Gray Polypropylene, EPDM, 316SS Flow Rating: v 2.2/Kv 31.6 Temperature Rating: F, 0-71 Pressure Rating: Vac-120 psig, 8.3 bar NEW! PGE 18 NS4 Series GP NS4D22002 & NS4D17006 NS Wetted Material: Glass-Filled, Gray Polypropylene, EPDM, 316SS Flow Rating: v 0.6/Kv 8.6 Temperature Rating: F, 0-71 Pressure Rating: Vac-120 psig, 8.3 bar PGE 20 HF12 Series HFD22612 & HF GP Wetted Material: Gray Polypropylene, EPDM, 316SS Flow Rating: v 2.0/Kv 28.7 Temperature Rating: F, 0-71 Pressure Rating: Vac-60 psig, 4.1 bar PGE22 EF12 Series GP EFD22412 & EFD17612 Material: Gray Polypropylene, EPDM, 316SS Flow Rating: v 0.87/Kv 12.5 Temperature Rating: F, 0-71 Pressure Rating: Vac-105 psig, 7.2 bar 6 opyright 2006 by older Products ompany. ll rights reserved. older Products ompany, older Products and P are registered trademarks with the US Patent & Trademark Office.

7 DrumQuik Series Dip-Tube Systems for Rigid ontainers (photos shown not to scale) NEW! PGE24 DrumQuik GP HP MODULR Series 2-Port Drum Insert Works with HF12, NSH & hemquik couplings Wetted Material: Virgin Polypropylene or PTFE Flow Rating (v): Dependent on coupling used Temperature Rating: F, Pressure Rating: Vac-45 psig, 3.1 bar (shown with shipping plugs installed) (shown with couplings installed) NEW! PGE 26 DrumQuik Universal Drum and ottle daptor Kits GP HP ny coupling with a 3/4 male NPT termination can now become a dip-tube that screws into standard closures. Single, 2-port and 2-port bottle designs available. Wetted Material: Polypropylene or PTFE Flow Rating (v): Dependent on coupling used Temperature Rating: F, Pressure Rating: Vac-15 psig, 1 bar Works with HF12, NSH and hemquik couplings. Press together to assemble Dip-Tube ushing oupling Insert oupling ody NEW! PGE 27 DrumQuik sian Drum daptor Kits GP daptor facilitates connection to center port of sian drum closures with integral dip-tubes. HP Wetted Material: Virgin Polypropylene Flow Rating (v): Dependent on coupling used Temperature Rating: F, Pressure Rating: Vac-45 psig, 3.1 bar Type For use with closure plugs with a 3/4" NPS center port. Type For use with closure plugs with a 1-3/8" buttress center port. oupling ccessories PGE 28 Dual ontainment System for Tubing Dust aps and Plugs Panel Mount daptors olored Flare Nuts and Keying System for ouplings NEW! Dimensions PGE 31 This section details the major dimensions for each product featured in this catalog, highlighting lengths in both the connected and disconnected state. For D files, go to or contact the factory. opyright 2006 by older Products ompany. ll rights reserved. older Products ompany, older Products and P are registered trademarks with the US Patent & Trademark Office. 7

8 IdentiQuik Series ouplings older s IdentiQuik series of Smart ouplings utilizes RFID technology to automatically identify fluid products and their characteristics and capture data from point-oforigin through point-of-use. Data stored on the package insert or fluid delivery line is transferred across the coupling before the two halves are connected. Your control system obtains this data via RS232 communications and uses it to improve safety, prevent misconnections, avoid dangerous combinations, verify processes, protect your brand, and capture important process data. Smart oupling Technology with Integrated RFID The IdentiQuik series of couplings from older Products ompany adds the power of RFID to your fluid management process. RFID tags, storing up to 64 bytes of data, are encapsulated on coupling inserts. Product identification, date, batch, and lot codes can be automatically transferred from inserts on bags, totes, drums, and supply lines to the connecting dispense or fill lines. Identification of an authorized connection can be achieved and used to notify a machine to turn on, start a pump or alter flow rates. This data can be used to initiate logic control, such as a turning on a pump, preventing misconnections, validating process recipes, locking out hazardous mixing at a systems level, all resulting in improved safety and more cost-efficient process control. Smart coupling technology can be applied to virtually any older coupling series. older engineers work with you to identify the optimal solution for your application. IDQU Series The Universal Dispensing oupling, designed for bag-in-box and rigid packaging offers a screw on cap or disposable fitment for 38mm spouts. Polypropylene bodies with EPDM seals offer greater chemical resistance and NSF listings. vailable in 3/8 flow with hose barbs for 1/4-3/4 ID tubing. IDQ Series The intelligent version of our widely popular PL series features acetal bodies with 1/4 flow and hose barbs for 1/4-3/8 ID tubing. Straight thru and shutoff bodies are available. In-line and elbow inserts with built-in RFID tags can be used for in-line and bag-in-box applications. IDQ12 Series polypropylene version of the IDQ series is available with hose barbs for 1/4 and 3/8 ID tubing. Shown here with non-valved insert and encapsulated RFID tag. Visit for more information. ontact our team of smart experts for assistance in applying this revolutionary capability to your coupling application. RFID TG: stores fluid data Smart oupling Technology with Integrated RFID NTENN INTERFE LE RFID TG INTERROGTOR STNDRD OLDER OUPLINGS: full range of terminations, flow sizes, materials, etc. IDQU Series IDQ & IDQ12 Series 8 opyright 2006 by older Products ompany. ll rights reserved. older Products ompany, older Products and P are registered trademarks with the US Patent & Trademark Office.

9 hemquik QG06 Series Material: Polypropylene HP P NS The QG06 Series is the lowest cost version of our Pressure- alanced, Non-Spill, High Purity couplings. Molded virgin polypropylene, Viton seals and a 100% springless and metal-free flow path provide broad chemical resistance and exceptionally high flow capacity, allowing instant disconnects (and reconnects), even under pressure. FETURES Non-Spill design Pressure-alanced design Springless flow path design Mechanical keying system QG06 Series Specifications Materials: Main components: Natural, virgin polypropylene Seals: Viton FKM Optional: Simriz FFKM perfluoroelastomer Springs (non-wetted): Hastelloy Flare nuts: PVDF Lubricants: None used ENEFITS Ultimate protection from chemicals and fumes Failsafe disconnect, even under pressure; easy to reconnect at high pressure Eliminates source of metallic contaminants Helps prevent accidental misconnects Spillage (air inclusion): <0.1 cc (ml)/disconnect (reconnect) Panel Mount: Optional adaptor kit (see accessories section) Keying System: Mechanical keying and color-coding (see page 30) ompatible with hemquik Dual ontainment System ompatible with DrumQuik MODULR Dispense System, Universal and sian Drum daptors. Patent Protected Pressure Drop (psid) pplications may include: pplications: Portable chemical cart connections copy Equipment, copy pump and filter connections copy Drums and I (tote) connections DI water line connections hemquik QGD06 Flow Performance (lpm) Fluid Temperature ( F) v~3.2 Kv= Flow Rate (gpm) (bar) hemquik hemquik QGD06 Pressure Range 1.38 (bar) ( ) Fluid Pressure (psig) Shaded area indicates operating range. hemquik oupling odies Polypropylene In-Line odies oupling Inserts Polypropylene In-Line Inserts TUING/THRED SIZE TERMINTION TYPE PRT NO. 3/8" OD Flare ompression QGD /2" OD Flare ompression QGD /4" OD Flare ompression QGD /2 Taper Male NPT QGD TUING/THRED SIZE TERMINTION TYPE PRT NO. 3/8" OD Flare ompression QGD /2" OD Flare ompression QGD /4" OD Flare ompression QGD /8 Taper Male NPT QGD /2 Taper Male NPT QGD /4 Taper Male NPT QGD For accessories, see page 28. For dimensions, see page 31. Indicates coupling that can be used with DrumQuik (see pages 24-27). opyright 2006 by older Products ompany. ll rights reserved. older Products ompany, older Products and P are registered trademarks with the US Patent & Trademark Office. 9

10 New & improved! hemquik QH06 Series Material: Polypropylene ll Plastic HP The QH06 Series is the most compact and lowest cost version of our hemquik High Purity couplings. They are all plastic couplings with no metal components. Molded, virgin, natural polypropylene, Viton FKM seals, PEEK plastic springs, and lubefree design provide broad compatibility and high flow capacity. FETURES QH06 Series Specifications Materials: Main components: Natural, virgin polypropylene Valve seals: Viton FKM (black) Optional: EPDM, hemraz FFKM perfluoroelastomer (white) External insert seal: Simriz FFKM perfluoroelastomer (black) NOTE: Simriz FFKM seal material will be used when optional Viton FKM or EPDM valve seals are ordered. Valve (wetted) and thumb latch spring: PEEK Optional: PPS, Teflon Encapsulated 316SS Flare nuts: PVDF Lubricants: None used Spillage (air inclusion): ~1.5cc (ml)/disconnect (reconnect) Keying System: olor-coding only, mechanical key not available (see page 30) ompatible with hemquik Dual ontainment System ompatible with DrumQuik MODULR Dispense System, Universal and sian Drum daptors. oupling odies Polypropylene In-Line ENEFITS 100% metal free No risk of metal contaminants or corrosion High flow valve design High flow in a compact package Disconnect under pressure Speeds servicing and reduces risk of injury olor coding system Helps prevent line misconnects Patent Protected TUING/THRED SIZE TERMINTION TYPE PRT NO. 1/4" OD Flare ompression QHD /8" OD Flare ompression QHD /2" OD Flare ompression QHD /4" OD Flare ompression QHD /8 Taper Male NPT QHD Pressure Drop (psid) Fluid Temperature ( F) pplications may include: Portable chemical cart connections Equipment, pump and filter connections DI water line connections/ DI spray guns Sampling port lines hemquik QHD06 Flow Performance (lpm) v~1.6 Kv= Flow Rate (gpm) hemquik QHD06 Pressure Range hemquik 1.38 (bar) (bar) ( ) Fluid Pressure (psig) Shaded area indicates operating range. hemquik Panel Mount oupling Inserts Polypropylene In-Line TUING/THRED SIZE TERMINTION TYPE PRT NO. 1/4" OD Flare ompression QHD /8" OD Flare ompression QHD /2" OD Flare ompression QHD /8 Taper Male NPT QHD TUING/THRED SIZE TERMINTION TYPE PRT NO. 1/4" OD Flare ompression QHD /8" OD Flare ompression QHD /2" OD Flare ompression QHD /4" OD Flare ompression QHD /8 Taper Male NPT QHD /4 Taper Male NPT QHD For accessories, see page 28. For dimensions, see page 31. Indicates coupling that can be used with DrumQuik (see pages 24-27). 10 opyright 2006 by older Products ompany. ll rights reserved. older Products ompany, older Products and P are registered trademarks with the US Patent & Trademark Office.

11 New & improved! hemquik QV06 Series Material: PVDF ll Plastic HP The QV06 Series couplings are similar to the all plastic QH06 Series couplings; however, they feature molded, virgin PVDF, with superior acid, UV and fire-resistant properties, passing STM, UL and ISO testing standards. hemraz FFKM perfluoroelastomer seals, PEEK plastic springs and lube-free design provide broad compatibility and high flow capacity. FETURES QV06 Series Specifications oupling odies PVDF In-Line Panel Mount PVDF In-Line ENEFITS PVDF material Superior acid resistance and purity; UV stable 100% metal-free No risk of metal contaminants or corrosion Standard hemraz seals roadest chemical resistance and purity UV stable and fire-resistant Suitable for extreme environments Materials: Main components: Natural, virgin PVDF Valve seals: hemraz FFKM perfluoroelastomer (white) Optional: EPDM, Viton FKM External insert seal: hemraz FFKM perfluoroelastomer (white) NOTE: Simriz FFKM will be used when optional EPDM or Viton valve seal is ordered. White hemraz FFKM will be used when optional hemraz FFKM valve seal is ordered. Valve (wetted) and thumb latch spring: PEEK Optional: PPS, Teflon Encapsulated 316SS Flare nuts: PVDF Lubricants: None used Spillage (air inclusion): ~1.5cc (ml)/disconnect (reconnect) Keying System: olor-coding only (mechanical key not available, see page 30) ompatible with hemquik Dual ontainment System ompatible with DrumQuik MODULR Dispense System, Universal and sian Drum daptors. oupling Inserts For accessories, see page 28. For dimensions, see page 31. Indicates coupling that can be used with DrumQuik (see pages 24-27). Patent Protected TUING/THRED SIZE TERMINTION TYPE PRT NO. 1/4" OD Flare ompression QVD /8" OD Flare ompression QVD /2" OD Flare ompression QVD **3/4" OD Flare ompression QVD /8 Taper Male NPT QVD TUING/THRED SIZE TERMINTION TYPE PRT NO. 1/4" OD Flare ompression QVD /8" OD Flare ompression QVD /2" OD Flare ompression QVD /8 Taper Male NPT QVD TUING/THRED SIZE TERMINTION TYPE PRT NO. 1/4" OD Flare ompression QVD /8" OD Flare ompression QVD /2" OD Flare ompression QVD **3/4" OD Flare ompression QVD /8 Taper Male NPT QVD **3/4 Taper Male NPT QVD ** Special order only. pplications may include: Portable chemical cart connections Equipment, pump and filter connections ggressive acid lines Sampling port lines Flow Rate (gpm) opyright 2006 by older Products ompany. ll rights reserved. older Products ompany, older Products and P are registered trademarks with the US Patent & Trademark Office. 11 Pressure Drop (psid) Fluid Temperature ( F) hemquik QVD06 Flow Performance (lpm) v~1.6 Kv=23.0 hemquik QVD06 Pressure Range 1.38 (bar) (bar) ( ) Fluid Pressure (psig) Shaded area indicates operating range.

12 The Ultimate oupling hemquik QN06 Series Material: PTFE HP P NS The QN Series features older s patented Pressure-alanced technology in a Non-Spill coupling that can be disconnected and reconnected under pressure. springless, 100% metal and lubricant-free flow path design, and PTFE material, with its almost universal chemical compatibility and ultra high purity, make them ideal for the most demanding applications in microelectronic, pharmaceutical and laboratory industries. FETURES Non-Spill design PTFE material and hemraz FFKM seals Springless & metal-free Mechanical & color keys QN06 Series Specifications Materials: Main components: Natural, virgin modified** PTFE (ETFE thumb latch) **NOTE: Dyneon TFM and/or Teflon NXT-75 Seals: hemraz FFKM perfluoroelastomer Optional: Simriz FFKM perfluoroelastomer (lower cost) Springs (non-wetted): Teflon encapsulated (not coated) 316 SS (Ultra pure fluids are isolated by two degrees of protection. Therefore, the QN06 & QN08 Series quick disconnects incorporate the superior performance of metal springs without the danger of fluid contamination. Only Teflon encapsulated springs located out of the flow path can assure this.) Dowel pins: PTFE Flare nuts: PVDF, PF optional Lubricants: None used ENEFITS Ultimate protection from chemicals and fumes an be used with almost any chemical No contaminants and exceptional flow capacity Helps prevent accidental misconnects Spillage (air inclusion): <0.1 cc (ml)/disconnect/reconnect Panel Mount: Optional adaptor kit (see accessories section) Keying System: Mechanical keying and color coding (see page 30) ompatible with hemquik Dual ontainment System ompatible with DrumQuik MODULR Dispense System, Universal and sian Drum daptors. Patent Protected Pressure Drop (psid) Fluid Temperature ( F) pplications may include: Portable chemical cart connections Equipment, pump and filter connections Drums and I (tote) connections Those requiring universal chemical compatibility Flow Rate (gpm) hemquik QND06 Flow Performance (lpm) v~3.0 Kv= Flow Rate (gpm) (bar) hemquik QND06 Pressure Range 1.38 (bar) ( ) Fluid Pressure (psig) Shaded area indicates operating range. oupling odies PTFE In-Line oupling Inserts PTFE In-Line TUING/THRED SIZE TERMINTION TYPE PRT NO. 1/4" OD Flare ompression QND /8" OD Flare ompression QND /2" OD Flare ompression QND /4" OD Flare ompression QND /2 Taper Female NPT QND TUING/THRED SIZE TERMINTION TYPE PRT NO. 1/4" OD Flare ompression QND /8" OD Flare ompression QND /2" OD Flare ompression QND /4" OD Flare ompression QND /4 Taper Male NPT QND /2 Taper Female NPT QND For accessories, see page 28. For dimensions, see page 31. Indicates coupling that can be used with DrumQuik (see pages 24-27). 12 opyright 2006 by older Products ompany. ll rights reserved. older Products ompany, older Products and P are registered trademarks with the US Patent & Trademark Office.

13 The Ultimate oupling hemquik QN08 Series Material: PTFE s big brother to the QN06 Series, the QN08 Series couplings have all of the same great features but in a larger flow size. Extremely rugged, they are designed for aggressive high flow/high purity applications. oupling inserts can be panel mounted. The unique keying system helps prevent misconnects. FETURES HP Large flow capacity (7.3 to 9.4 v) Non-Spill design Pressure-alanced design Mechanical and color keys P NS ENEFITS QN08 Series Specifications Materials: Main components: Natural, virgin modified** PTFE & PF **NOTE: Dyneon TFM and/or Teflon NXT-75 Fast fluid transfer Ultimate protection from chemicals and fumes Large flow capacity, yet as easy to connect under pressure as at 0 psig Helps prevent accidental misconnects Seals: hemraz FFKM perfluoroelastomer Optional: Simriz FFKM perfluoroelastomer (lower cost) Springs (non-wetted): Teflon encapsulated (not coated) 316 SS (Ultra pure fluids are isolated by two degrees of protection. Therefore, the QN06 & QN08 Series quick disconnects incorporate the superior performance of metal springs without the danger of fluid contamination. Only Teflon encapsulated springs located out of the flow path can assure this.) Dowel pins: PTFE Flare nuts: PVDF, PF optional Lubricants: None used Spillage (air inclusion): ~0.1 cc (ml)/disconnect/reconnect Panel Mount: Optional adaptor kit (see accessories section) Keying System: Mechanical keying and color-coding (see page 30) ompatible with hemquik Dual ontainment System ompatible with DrumQuik MODULR Dispense System, Universal and sian Drum daptors. Pressure Drop (psid) pplications may include: ulk chemical transfer (drums, Is, ISO-tainers, tanker trucks, etc.) Portable chemical cart connections Equipment, pump and filter connections Those requiring universal chemical compatibility hemquik QND08 Flow Performance (lpm) Fluid Temperature ( F) QND08 Double-sided shut-off Kv=104.9 v~7.3 QN08 Single-sided v~9.4 Kv=135.1 shut-off Flow Rate (gpm) hemquik QND08 & QN08 Pressure Range 1.38 (bar) QN08 Single-sided shut-off QND Double- sided shut-off -6.7( ) Fluid Pressure (psig) Shaded area indicates operating range (bar) oupling odies PTFE In-Line oupling Inserts PTFE In-Line TUING/THRED SIZE TERMINTION TYPE PRT NO. 3/4" OD Tube Flare ompression QND " OD Tube Flare ompression QND /4 Taper Thread Male NPT QND /4 Taper Thread Female NPT QND TUING/THRED SIZE TERMINTION TYPE PRT NO. 3/4" OD Tube Flare ompression QND " OD Tube Flare ompression QND /4 Taper Thread Male NPT QND /4 Taper Thread Female NPT QND **3/4 Taper Thread Female NPT (non-valved) QN For accessories, see page 28. For dimensions, see page 31. Indicates coupling that can be used with DrumQuik (see pages 24-27). **Special order only, this non-valved coupling insert will yield a v of 9.4 when coupled with valved body. valved non-valved opyright 2006 by older Products ompany. ll rights reserved. older Products ompany, older Products and P are registered trademarks with the US Patent & Trademark Office. 13

14 NEW! NSH Series Material: Polypropylene GP P NS The NSH Series couplings are general purpose versions of our Pressure-alanced, Non-Spill, hemquik QG06 couplings. Molded polypropylene, EPDM seals and a 100% springless and metal-free flow path provide broad chemical resistance and exceptionally high flow capacity, allowing instant disconnects (and reconnects), even under pressure. Their non-spill design virtually eliminates spills, minimizes downtime and enhances operator safety in a very low cost package. FETURES Non-Spill design Pressure-alanced design Springless flow path design Optional color-coding ENEFITS Ultimate protection from chemicals and fumes Failsafe disconnect, even if under pressure; easy to reconnect at high pressure Eliminates source of metallic contaminants Helps prevent accidental misconnects Patent Protected olor-coded NSH couplings. pplications may include: Portable chemical cart connections Equipment, pump and filter connections Drums & I (tote) connections Water treatment plants, car washes, industrial laundry oupling odies Polypropylene Pipe Thread In-Line ompression THRED SIZE TERMINTION TYPE PRT NO. 3/8" NPT Female NPT Thread NSHD /8" SPT Male SPT Thread NSHD10006SPT 1/2" NPT Male NPT Thread NSHD /4" NPT Male NPT Thread NSHD10012 TUING SIZE METRI EQ. TERMINTION TYPE PRT NO. 3/8" OD 9.5mm OD ompression NSHD /2" OD 12.7mm OD ompression NSHD13008 Hose arb TUING SIZE METRI EQ. TERMINTION TYPE PRT NO. 3/8" ID 9.5mm ID Hose arb NSHD /2" ID 12.7mm ID Hose arb NSHD /8" ID 15.9mm ID Hose arb NSHD /4" ID 19.0mm ID Hose arb NSHD17012 For accessories, see page 28. For dimensions, see page 31. Indicates coupling that can be used with DrumQuik (see pages 24-27). 14 opyright 2006 by older Products ompany. ll rights reserved. older Products ompany, older Products and P are registered trademarks with the US Patent & Trademark Office.

15 NSH Series Specifications Materials: Main components: Glass-filled, light gray polypropylene Thumb latch: Glass-filled, dark gray polypropylene Seals: EPDM Optional: Viton FKM Springs (non-wetted): 316 stainless steel Optional: Hastelloy ompression nuts: Glass-filled, white polypropylene Lubricants: Krytox PFPE (inert) Spillage (air inclusion): <0.1 cc (ml)/disconnect (reconnect) Panel Mount: Optional adaptor kit (see accessories section) Keying System: olor-coding only (red or blue), mechanical key not available ompatible with hemquik Dual ontainment System ompatible with DrumQuik MODULR Dispense System, Universal and sian Drum daptors. Patent Protected Panel mount NSH series coupling. Pressure Drop (psid) NSH Flow Performance 18.9 (lpm) v~3.3 Kv= Flow Rate (gpm) (bar) Fluid Temperature ( F) NSH Pressure Range 1.72 (bar) ( ) Fluid Pressure (psig) Shaded area indicates operating range. oupling Inserts Polypropylene Pipe Thread THRED SIZE TERMINTION TYPE PRT NO. 3/8" NPT Female NPT Thread NSHD /8" SPT Male SPT Thread NSHD24006SPT 1/2" NPT Male NPT Thread NSHD /4" NPT Male NPT Thread NSHD24012 In-Line ompression TUING SIZE METRI EQ. TERMINTION TYPE PRT NO. 3/8" OD 9.5mm OD ompression NSHD /2" OD 12.7mm OD ompression NSHD20008 Hose arb TUING SIZE METRI EQ. TERMINTION TYPE PRT NO. 3/8" ID 9.5mm ID Hose arb NSHD /2" ID 12.7mm ID Hose arb NSHD /8" ID 15.9mm ID Hose arb NSHD /4" ID 19.0mm ID Hose arb NSHD22012 For accessories, see page 28. For dimensions, see page 31. Indicates coupling that can be used with DrumQuik (see pages 24-27). opyright 2006 by older Products ompany. ll rights reserved. older Products ompany, older Products and P are registered trademarks with the US Patent & Trademark Office. 15

16 NEW! NS6 Series Non-Spill ouplings Material: Polypropylene Patent-pending NS6 Series couplings feature non-spill valves in a compact size, at a great price. Use the NS6 when even a few drops of spillage pose problems regarding safety, media cost or environmental regulations. These innovative couplings are lightweight, chemically-resistant and easy to use. The Non-Spill design virtually eliminates spills, minimizes downtime and enhances operator safety. Soft touch overmold makes them comfortable in the hand and very attractive. FETURES GP ENEFITS Non-Spill design Disconnect under pressure with no spills olor-coding Instant visual differentiation of media lines Glass-filled Durable and compatible with many chemicals polypropylene older thumb latch One-hand connection and disconnection TPV overmold Provides soft touch feel for excellent ergonomics NS Patent Pending pplications may include: Ink handling hemical delivery systems Electronic cooling Instrumentation Medical devices Water treatment plants, car washes, industrial laundry oupling odies Polypropylene Pipe Thread THRED SIZE TERMINTION TYPE PRT NO. 1/2" NPT Male NPT Thread NS6D /2" SPT Male SPT Thread NS6D10008SPT In-Line ompression TUING SIZE METRI EQ TERMINTION TYPE PRT NO. 1/2" OD 12.7mm OD ompression NS6D13008 Hose arb TUING SIZE METRI EQ TERMINTION TYPE PRT NO. 3/8" ID 9.5mm ID Hose arb NS6D /2" ID 12.7mm ID Hose arb NS6D17008 For accessories, see page 28. For dimensions, see page 31. Indicates coupling that can be used with DrumQuik (see pages 24-27). 16 opyright 2006 by older Products ompany. ll rights reserved. older Products ompany, older Products and P are registered trademarks with the US Patent & Trademark Office.

17 NS6 Series Specifications Materials: Main components: Glass-filled, polypropylene Thumb latch: Glass-filled, polypropylene Valve spring (wetted): 316 stainless steel Optional: Hastelloy External spring: 316 stainless steel Optional: Hastelloy O-rings: EPDM Optional: FKM Soft touch overmold: TPV* olor: Gray with dark gray overmold standard (gray with red or blue overmold available) Lubricants: Krytox PFPE (inert) Spillage: ~ psi, ~ psi Panel Mount: Integral; available on insert only Keying System: olor-coding only (mechanical key not available) *The overmold material is known as TPV (thermoplastic vulcanizate). This TPV is an alloy of polypropylene thermoplastic and fully vulcanized EPDM rubber. The material is typically resistant to water, acids and bases. Pressure Drop (psid) Fluid Temperature ( F) NS6 Flow Performance (lpm) v~2.2 Kv= Flow Rate (gpm) NS6 Pressure Range 1.72 (bar) ( ) Fluid Pressure (psig) Shaded area indicates operating range (bar) oupling Inserts Polypropylene Pipe Thread In-Line ompression Hose arb THRED SIZE TERMINTION TYPE PRT NO. 1/2" NPT Male NPT Thread NS6D /2" SPT Male SPT Thread NS6D24008SPT TUING SIZE METRI EQ TERMINTION TYPE PRT NO. 1/2" OD 12.7mm OD ompression NS6D20008 TUING SIZE METRI EQ TERMINTION TYPE PRT NO. 3/8" ID 9.5mm ID Hose arb NS6D /2" ID 12.7mm ID Hose arb NS6D22008 Panel Mount ompression TUING SIZE METRI EQ TERMINTION TYPE PRT NO. 1/2" OD 12.7mm OD ompression NS6D40008 Hose arb Panel Hole 1-1/4" (31.8mm) TUING SIZE METRI EQ TERMINTION TYPE PRT NO. 3/8" ID 9.5mm ID Hose arb NS6D /2" ID 12.7mm ID Hose arb NS6D42008 For accessories, see page 28. For dimensions, see page 31. Indicates coupling that can be used with DrumQuik (see pages 24-27); requires a 3/4" NPT to 1/2" NPT adaptor bushing for use with DrumQuik MODULR. opyright 2006 by older Products ompany. ll rights reserved. older Products ompany, older Products and P are registered trademarks with the US Patent & Trademark Office. 17

18 NEW! NS4 Series Non-Spill ouplings Material: Polypropylene GP NS Ideal for installations where space is at a premium, patented NS4 Series couplings have the same great features as NS6 couplings but in a more compact package, at a great price. Use the NS4 when even a few drops of spillage pose problems regarding safety, media cost or environmental regulations. These innovative couplings are lightweight, chemically-resistant and easy to use. The Non-Spill design virtually eliminates spills, minimizes downtime and enhances operator safety. FETURES Non-Spill design olor-coding Glass-filled polypropylene older thumb latch TPV overmold ENEFITS Disconnect under pressure with no spills Instant visual differentiation of media lines Durable and compatible with many chemicals One-hand connection and disconnection Provides soft touch feel for excellent ergonomics Patent Protected pplications may include: Ink handling hemical delivery systems Electronic cooling Instrumentation Medical devices Lab uses oupling odies Polypropylene Pipe Thread THRED SIZE TERMINTION TYPE PRT NO. 1/4" NPT Male NPT Thread NS4D /4" SPT Male SPT Thread NS4D10004SPT TUING SIZE METRI EQ TERMINTION TYPE PRT NO. In-Line 3/8" OD 1/4" ID 9.5mm OD 6.4mm ID ompression NS4D13006 Ferruless Polytube Fitting, PTF Hose arb TUING SIZE METRI EQ TERMINTION TYPE PRT NO. 1/8" ID* 3.2mm ID* Hose arb NS4D /4" ID 6.4mm ID Hose arb NS4D /8" ID 9.5mm ID Hose arb NS4D17006 For accessories, see page 28. For dimensions, see page 31. *For 1/8" (3.2mm) ID tubing, maximum tube OD is 1/4" (6.4mm). older s Ferruleless PTF (Polytube Fitting) terminations do not require ferrules to achieve a secure connection and are therefore easier to use and reuse. PTF fittings are designed for semi-rigid tubing, e.g., polyethylene, nylon, polyurethane, etc. Indicates coupling that can be used with DrumQuik (see pages 24-27); requires a 3/8" NPT to 1/4" NPT adaptor bushing for use with DrumQuik UD 2-Port. 18 opyright 2006 by older Products ompany. ll rights reserved. older Products ompany, older Products and P are registered trademarks with the US Patent & Trademark Office.

19 NS4 Series Specifications Materials: Main components: Glass-filled, polypropylene Thumb latch: Glass-filled, polypropylene Valve spring (wetted): 316 stainless steel Optional: Hastelloy External spring: 316 stainless steel Optional: Hastelloy O-rings: EPDM Optional: FKM Soft touch overmold: TPV* olor: Gray with dark gray overmold standard (gray with red or blue overmold available) Lubricants: Krytox PFPE (inert) Spillage: <0.10 cc/disconnect Panel Mount: Integral; available on insert only Keying System: olor-coding only (mechanical key not available) *The overmold material is known as TPV (thermoplastic vulcanizate). This TPV is an alloy of polypropylene thermoplastic and fully vulcanized EPDM rubber. The material is typically resistant to water, acids and bases. Pressure Drop (psid) Fluid Temperature ( F) NS4 Flow Performance 3.8 (lpm) v~0.6 Kv= Flow Rate (gpm) hemquik NS4 Pressure Range 1.72 (bar) ( ) Fluid Pressure (psig) Shaded area indicates operating range (bar) hemquik oupling Inserts Polypropylene Pipe Thread THRED SIZE TERMINTION TYPE PRT NO. 1/4" NPT Male NPT Thread NS4D /4" SPT Male SPT Thread NS4D24004SPT In-Line Ferruless Polytube Fitting, PTF TUING SIZE METRI EQ TERMINTION TYPE PRT NO. 3/8" OD 1/4" ID 9.5mm OD 6.4mm ID ompression NS4D20006 Hose arb Panel Mount Ferruless Polytube Fitting, PTF Hose arb Panel Hole 15/16" (23.9mm) TUING SIZE METRI EQ TERMINTION TYPE PRT NO. 1/8" ID* 3.2mm ID* Hose arb NS4D /4" ID 6.4mm ID Hose arb NS4D /8" ID 9.5mm ID Hose arb NS4D22006 TUING SIZE METRI EQ TERMINTION TYPE PRT NO. 3/8" OD 1/4" ID 9.5mm OD 6.4mm ID ompression NS4D40006 TUING SIZE METRI EQ TERMINTION TYPE PRT NO. 1/8" ID* 3.2mm ID* Hose arb NS4D /4" ID 6.4mm ID Hose arb NS4D /8" ID 9.5mm ID Hose arb NS4D42006 For accessories, see page 28. For dimensions, see page 31. *For 1/8" (3.2mm) ID tubing, maximum tube OD is 1/4" (6.4mm). older s Ferruleless PTF (Polytube Fitting) terminations do not require ferrules to achieve a secure connection and are therefore easier to use and reuse. PTF fittings are designed for semi-rigid tubing, e.g., polyethylene, nylon, polyurethane, etc. Indicates coupling that can be used with DrumQuik (see pages 24-27); requires a 3/8" NPT to 1/4" NPT adaptor bushing for use with DrumQuik UD 2-Port. opyright 2006 by older Products ompany. ll rights reserved. older Products ompany, older Products and P are registered trademarks with the US Patent & Trademark Office. 19

20 HF12 Series Material: Polypropylene GP Patented HF12 Series couplings have flow comparable to many 1/2" nominal flow couplings in a 3/8" body size. ompact and lightweight, HF couplings replace bulky and heavy brass balland-sleeve couplings in a wide range of applications. n ergonomic design and a large shrouded thumb latch pad produce a coupling that is easy to grip and simple to operate. n efficient valve design leads to high flow and low spillage. FETURES High efficiency valve Ergonomic design Polypropylene material older compatible ENEFITS More flow and less spillage in a compact size Easy to grip, simple to operate hemically-resistant and gamma sterilizable Mates with HF35 and HF57 couplings Patent Protected pplications may include: Photo processing chemicals attery filling equipment ir mattress systems Spray equipment ntifreeze recycling Thermal management oupling odies Polypropylene Pipe Thread ulkhead Panel Mount Hose arb Panel Hole 1.21" (31mm) THRED SIZE STRIGHT THRU SHUTOFF 3/8" NPT HF10612 HFD /8" SPT HF10612SPT HFD10612SPT 1/2" NPT HF10812 HFD /4" NPT HF HFD TUING SIZE METRI EQ. STRIGHT THRU SHUTOFF 3/8" ID 9.5mm ID HF16612 HFD /2" ID 12.7mm ID HF16812 HFD /8" ID 15.9mm ID HF HFD /4" ID 19.0mm ID HF HFD ompression TUING SIZE METRI EQ. STRIGHT THRU SHUTOFF 3/8" OD 9.5mm OD HF12612 HFD /2" OD 12.7mm OD HF12812 HFD12812 In-Line Hose arb ompression TUING SIZE METRI EQ. STRIGHT THRU SHUTOFF 3/8" ID 9.5mm ID HF17612 HFD /2" ID 12.7mm ID HF17812 HFD /8" ID 15.9mm ID HF HFD /4" ID 19.0mm ID HF HFD TUING SIZE METRI EQ. STRIGHT THRU SHUTOFF 3/8" OD 9.5mm OD HF13612 HFD /2" OD 12.7mm OD HF13812 HFD13812 For accessories, see page 28. For dimensions, see page 31. Indicates coupling that can be used with DrumQuik (see pages 24-27). 20 opyright 2006 by older Products ompany. ll rights reserved. older Products ompany, older Products and P are registered trademarks with the US Patent & Trademark Office.

21 HF12 Series Specifications Materials: Main components and valves: Virgin, gray polypropylene Thumb latch: Virgin, dark gray polypropylene Valve spring (wetted): 316 stainless steel Optional: Hastelloy External springs: 316 stainless steel Optional: Hastelloy O-rings: EPDM Optional: FKM Panel mount gasket: EPDM Optional: Hastelloy Lubricant: Silicone Spillage: ~1.5 cc/disconnect Panel Mount: Integral; available on body only Keying System: Not available HF couplings are used on liquid chillers to recirculate cooling fluids in laser, laboratory and medical products. WRNING: Pressure, temperature, chemicals, and operating environment can affect the performance of couplings. It is the customer s responsibility to test the suitability of older products in their own application conditions. Use the graphs below as a guide. Pressure Drop (psid) HF12 Flow Performance (lpm) v~2.0 Kv= Flow Rate (gpm) (bar Fluid Temperature ( F) HFD12 Pressure Range 1.72 (bar) ( ) Fluid Pressure (psig) Shaded area indicates operating range. oupling Inserts Polypropylene Pipe Thread THRED SIZE STRIGHT THRU SHUTOFF 3/8" NPT HF24612 HFD /8" SPT HF24612SPT HFD24612SPT 1/2" NPT HF24812 HFD /4" NPT HF HFD In-Line Hose arb ompression TUING SIZE METRI EQ. STRIGHT THRU SHUTOFF 3/8" ID 9.5mm ID HF22612 HFD /2" ID 12.7mm ID HF22812 HFD /8" ID 15.9mm ID HF HFD /4" ID 19.0mm ID HF HFD TUING SIZE METRI EQ. STRIGHT THRU SHUTOFF 3/8" OD 9.5mm OD HF20612 HFD /2" OD 12.7mm OD HF20812 HFD20812 Elbow Hose arb TUING SIZE METRI EQ. STRIGHT THRU SHUTOFF 3/8" ID 9.5mm ID HF23612 HFD /2" ID 12.7mm ID HF23812 HFD23812 For accessories, see page 28. For dimensions, see page 31. Indicates coupling that can be used with DrumQuik (see pages 24-27). opyright 2006 by older Products ompany. ll rights reserved. older Products ompany, older Products and P are registered trademarks with the US Patent & Trademark Office. 21

22 EF12 Series Material: Polypropylene GP The EF Series couplings feature a high efficiency valve design that provides for a greater flow capability than any other coupling its size. hemically-resistant polypropylene material makes it ideal for harsh environments. The EF Series adds a bulkhead panel mount option for tight seals against tank walls and drums. FETURES High efficiency valve Plastic thumb latch Polypropylene material older compatible ENEFITS More flow in a compact size Fewer moving parts hemically-resistant and gamma sterilizable Mates with most P couplings pplications may include: Soap dispensing Fume hoods Dry cleaning chemicals attery filling equipment Package filling machinery Electronics water treatment oupling odies Polypropylene Pipe Thread THRED SIZE METRI EQ. SHUTOFF 1/4" NPT EFD /8" NPT EFD10612 ulkhead Panel Mount Hose arb Panel Hole 11/16" (18mm) TUING SIZE METRI EQ. SHUTOFF 1/4" ID 6.4mm ID EFD /8" ID 9.5mm ID EFD16612 In-Line Hose arb TUING SIZE METRI EQ. SHUTOFF 1/4" ID 6.4mm ID EFD /8" ID 9.5mm ID EFD17612 For accessories, see page 28. For dimensions, see page 31. Indicates coupling that can be used with DrumQuik (see pages 24-27). 22 opyright 2006 by older Products ompany. ll rights reserved. older Products ompany, older Products and P are registered trademarks with the US Patent & Trademark Office.

23 EF12 Series Specifications Materials: Main components and valves: Virgin, light gray polypropylene Thumb latch: Virgin, dark gray polypropylene Valve spring (wetted): 316 stainless steel External springs: 302 stainless steel O-rings: EPDM Panel mount gasket: EPDM Lubricant: Silicone Spillage: ~1.3 cc/disconnect Panel Mount: Integral; available on body only Keying System: Not available EF quick disconnect coupling simplifies chemical draining process. Pressure Drop (psid) EF12 Flow Performance 3.8 (lpm) v~0.8 Kv= Flow Rate (gpm) (bar) Fluid Temperature ( F) EFD12 Pressure Range 1.72 (bar) ( ) Fluid Pressure (psig) Shaded area indicates operating range. oupling Inserts Polypropylene Pipe Thread THRED SIZE SHUTOFF 1/4" NPT EFD /8" NPT EFD24612 In-Line Hose arb TUING SIZE METRI EQ. STRIGHT THRU SHUTOFF 1/4" ID 6.4mm ID EF22412 EFD /8" ID 9.5mm ID EF22612 EFD22612 Elbow Hose arb TUING SIZE METRI EQ. STRIGHT THRU SHUTOFF 1/4" ID 6.4mm ID EF23412 EFD /8" ID 9.5mm ID EF23612 EFD23612 For accessories, see page 28. For dimensions, see page 31. Indicates coupling that can be used with DrumQuik (see pages 24-27). opyright 2006 by older Products ompany. ll rights reserved. older Products ompany, older Products and P are registered trademarks with the US Patent & Trademark Office. 23

24 See red part numbers throughout catalog for couplings that are DQ compatible NEW! DrumQuik MODULR Dispense System GP HP Material: Polypropylene and PTFE The easy to use DrumQuik MODULR Dispense System combines your choice of hemquik or General Purpose couplings with a modular dip-tube based system for the extraction of aggressive or ultrapure chemicals from drums and Is. This extremely durable and reliable two-port, closed system increases operator safety and reduces downtime by virtually eliminating dangerous spills and fumes. FETURES Modular design Two-port system Standard threads ENEFITS Provides flexibility in system configuration Eliminates fumes and allows N2 ports and recirculation Fits common drum bungs (2" buttress,s 56x4, etc.) pplications may include: io/pharm IP chemicals Micro-electronic high purity chemicals Industrial chemicals used in water treatment, car wash, laundry, and more DrumQuik Specifications (will vary based on couplings and container selected) Materials: Main omponents: Natural, virgin PTFE or polypropylene Dip-Tube Seal: FEP Encapsulated Viton FKM *Vent heck Valve: PVDF with Hastelloy spring, Viton seal *ack Flow heck Valve: PF, Kalrez seal Seals: FEP Encapsulated Viton included with Drum Insert Lubricants: None used oupling omponents: Dependent on coupling (see coupling product pages for specifications) *NOTE: Some applications require the use of a back flow check valve (V) which prevents reverse flow when suction pump is turned off. older recommends that the V be installed immediately downstream from the liquid line coupling body. Similarly, to allow air into drum, but prevent fumes from escaping, install a vent check valve (VV) in vent port. ontact older s factory for assistance, also see page 27. onstruction Type: Modular drum insert bung and dip-tube Number of Ports: Two; one 3/4 female NPT liquid port and one 3/8 female NPT vent port (with backup seals included in seal kit) Drum Thread: Industry standard 2 buttress, 2 NPS and S 56x4 (European standard) others available by special order; contact factory Dip-Tube Length: 35.3 (897mm) or 55 (1397mm) (measured from sealing surface, may be trimmed to fit special container) Pressure: 0 to 45 psig (0 to 3.1 bar) Temperature: 0 to 150 F (-17 to 65 ), polypropylene limited to 32 F (0 ) For DrumQuik accessories, see page 27. Standard Products Drum Inserts Dip-Tubes Pipe Plugs Replacement Seal Kit for DQM Vent heck Valve (VV) ack Flow heck Valve (V) Foot Valve DESRIPTION PRT NO. ung, polypropylene, 3/4 NPT liquid port, 3/8 NPT vent, 2 buttress DQM D2PP 2UT (coarse thread, U.S. standard) ung, polypropylene, 3/4" NPT liquid port, 3/8 NPT vent, 2" NPS DQM DI2PP 2NPS (fine thread, U.S. standard) ung, polypropylene, 3/4" NPT liquid port, 3/8 NPT vent, S 56x4 DQM DI2PP 56X4 (European standard) ung, PTFE, 3/4 NPT liquid port, 3/8 NPT vent, 2 buttress DQM DI2PTFE 2UT (coarse thread, U.S. standard) ung, PTFE, 3/4" NPT liquid port, 3/8" NPT vent, 2" NPS DQM DI2PTFE 2NPS (fine thread, U.S. standard) ung, PTFE, 3/4" NPT liquid port, 3/8 NPT vent, S 56x4 DQM DI2PTFE 56X4 (European standard) DESRIPTION Dip-tube, polypropylene, 35.3 (897mm) long from sealing surface Dip-tube, polypropylene, 55 (1397mm) long from sealing surface Dip-tube, PTFE, 35.3 (897mm) long from sealing surface Dip-tube, PTFE, 55 (1397mm) long from sealing surface DESRIPTION Hex pipe plug, 3/8 NPT, PF material Hex pipe plug, 3/8 NPT, PF material DESRIPTION omplete seal kit FEP Encapsulated Viton FKM (includes liquid port and bung seals) DESRIPTION For DrumQuik vent port (see page 27) DESRIPTION Mount downstream of liquid coupling (see page 27) DESRIPTION Mount at bottom of dip tube (see page 27) PRT NO. DQM DTUE PP35 DQM DTUE PP55 DQM DTUE PTFE35 DQM DTUE PTFE55 PRT NO. DQM PLUG PF06 DQM PLUG PF12 PRT NO. DQM SKIT FEPVITON PRT NO. DQM K PVDF0206 PRT NO. DQM K PF0308 PRT NO. DQM FV PP0204 (for PTFE dip-tubes) DQM FV PP0208 (for polypropylene dip-tubes) 24 opyright 2006 by older Products ompany. ll rights reserved. older Products ompany, older Products and P are registered trademarks with the US Patent & Trademark Office.

25 NEW! See red part numbers throughout catalog for couplings that are DQ compatible DrumQuik MODULR onfiguration DrumQuik dip-tubes and mating hemquik or General Purpose couplings provide the ultimate system for extracting chemicals from drums and larger I/tote containers. ny standard older hemquik, NSH or HF12 Series coupling set (or even common fittings) can be used with the DrumQuik system to provide instant, safe and reliable connections of chemical lines to rigid containers. Simply thread the coupling(s) into DrumQuik drum insert to provide the system connection. Then, thread in a DrumQuik dip-tube of proper length for a perfect match to your drum or I/tote. Insert the assembly into the container and your system is complete. K FLOW HEK VLVE (V): check valve (V) is available to prevent loss of prime at pump. Mount downstream of liquid line body. (see page 27) DrumQuik MODULR Dispense System (with quick disconnect) Shown with QN08 liquid and QH06 vent line couplings. HEMQUIK LIQUID LINE OUPLING INSERT: Select an NSH, QG06, QN06 or QN08 Series insert with a 3/4 male NPT termination. DRUMQUIK SELS Two included with Drum Insert. DRUM UNG THRED 2 buttress, 2 NPS and S 56x4 are standard. *DIP-TUE SEL omes assembled. HEMQUIK LIQUID LINE OUPLING ODY: Select any NSH, QG06, QN06 or QN08 Series body based on desired type, size and termination. DIP-TUE LENGTH Measured from seal surface of drum insert to bottom of dip tube. HEMQUIK VENT LINE OUPLING ODY: Select any HF12, QH06 or QV06 Series body based on desired type, size and termination. HEMQUIK VENT LINE OUPLING INSERT: Select an HF12, QH06 or QV06 Series insert with a 3/8 male NPT termination. NOTE: PVDF check valve (VV) is also available to contain fumes and vent drum. (see page 27) DRUMQUIK DRUM INSERT Includes two FEP Encapsulated Viton seals. FOOT VLVE DRUMQUIK DIP-TUE Threaded into drum insert seal is included. WRNING: lways check for chemical compatibility of all DrumQuikand coupling components for suitability in a specific application prior to use. *NOTE: e sure that seal is installed on dip-tube before assembling dip-tube with drum insert. opyright 2006 by older Products ompany. ll rights reserved. older Products ompany, older Products and P are registered trademarks with the US Patent & Trademark Office. 25

26 See red part numbers throughout catalog for couplings that are DQ compatible NEW! DrumQuik Universal Drum daptors DrumQuik DQ UD Drum daptor Kit The DrumQuik DQ UD kit turns any hemquik or General Purpose (HF or NSH) coupling into a dip-tube that can easily be threaded into the 3/4" female NPS port of common drum closures. It provides a simple and inexpensive way to dispense chemicals in pumped systems. For your convenience, older offers a variety of drum adaptor plugs to facilitate easy drum connections, see page 27. Press together to assemble. Universal Drum daptor Kit. Dip-Tube ushing oupling Insert oupling ody PRT NO. DQ UDKIT PP35 DQ UDKIT PP55 Use above kits with HF, NSH, QG06, and QH06 Series couplings. DQ UDKIT PTFE35 DQ UDKIT PTFE55 Use above kits with QN Series couplings. DESRIPTION Kit for 55 gal drum (approx 35.5" (902mm) dip-tube, trim to length), polypropylene Kit for I (approx 55.5" (1410mm) dip-tube, trim to length), polypropylene Kit for 55 gal drum (approx 35.5" (902mm) dip-tube, trim to length), PTFE Kit for I (approx 55.5" (1410mm) dip-tube, trim to length), PTFE DrumQuik DQ UD 2-Port Drum daptor Kit Like the DQ UD, the DQ UD 2-port system is intended to thread into the 3/4 female NPS port of common drums, 5 gallon (20 liter) pails or even Nalgene bottle closures. However, it features 2-ports; a 3/8 female NPT liquid port that connects to the dip-tube (included), and a 1/4 female NPT vent port. For your convenience, older offers a variety of drum adaptor plugs to facilitate easy drum connections, see page 27. Universal 2-Port Drum daptor Kit. PRT NO. DESRIPTION DQ UD2PKIT PP 2-port adaptor, polypropylene with FKM seal (approx 35.5" (902mm) dip-tube, trim to length) (3/8" female NPT liquid port, 1/4" female NPT vent port) DQ UD2P NLNUT daptor nut to secure to Nalgene cap, polypropylene ( 1-1/8" (28.5mm) hole must be punched in top of Nalgene cap to allow adaptor to be inserted. Seal to go on outside, not inside of cap.) NEW! ottlequik U 2-Port ottle daptor Kit The ottlequik is very similar to the DQ UD 2-port, but is intended for use on reagent bottles with SP400-38mm threads. It can be used in either the upright position or inverted and for this reason has two 3/8 female NPT ports for liquid and vent ports. PRT NO. DQ UDP2PKIT PP DESRIPTION 2-port adaptor for bottles with SP400-38mm threads (3/8" female NPT liquid port, 3/8" female NPT vent port) ottlequik U 2-Port ottle daptor Kit. NOTE: The DQ UD kits are designed to only work with older couplings that have 3/4" NPT male terminations. The DQ UD 2-Port kits are designed to work with a 3/8" NPT male on the liquid port and a 1/4" NPT male on the vent port. 3/8" male NPT to 1/4" female NPT reducer bushing may be required to accommodate smaller NS4, PL and PM Series couplings. ottlequik features two 3/8 female NPT ports. 26 opyright 2006 by older Products ompany. ll rights reserved. older Products ompany, older Products and P are registered trademarks with the US Patent & Trademark Office.

27 NEW! DrumQuik ccessories See red part numbers throughout catalog for couplings that are DQ compatible DrumQuik sian Drum daptors The DrumQuik sian Drum daptors are bushings that allow any hemquik or General Purpose (HF or NSH) coupling to easily be connected to the unique threads common in many drum closures (with integral dip-tubes) manufactured in sia, e.g., Kodama, ccelo, Stella, Dung Woo, etc. 3/4" female NPT inner thread can accept any coupling or fitting with a 3/4" male NPT termination. Type For use with closure plugs with a 3/4" NPS center port. Type For use with closure plugs with a 1-3/8" buttress center port. PRT NO. DESRIPTION DQ D PP 0212 Type daptor; polypropylene, with Viton FKM seals DQ D PP 0622 Type daptor; polypropylene, with Viton FKM seals NOTE: Other materials possible; contact factory for quote and lead time. 3/4" NPT inner port incorporates a face seal to assure a leak-free connection. DrumQuik heck Valves and Foot Valves The DrumQuik check valves and foot valves are intended for use with DrumQuik MODULR Dispense Systems. heck valves can be used as a vent check valve (VV), which allows make-up air into the drum when liquid is removed, but will prevent fumes from escaping. They can also be used as a back flow check valve (V), which will prevent the pump from losing its prime during extended periods of inactivity. New foot valves serve the same function as the V, with the added benefit of preventing fluid loss from the bottom of the dip-tube during transfer from drum to drum. Foot Valve Foot Valve heck Valve (PVDF) PRT NO. DQM K PVDF 0204 DQM K PVDF 0206 DQM K PVDF 0208 DQM K PF 0308 DQM FV PP0204 DQM FV PP0208 DQM FV PP0708 NOTE: Special order; contact factory for availability. DESRIPTION PVDF, Hastelloy spring, Viton FKM seal (1/4" male NPT inlet and outlet) Use with DQM PTFE dip-tube part number DQM DTUE PTFE35 & 55: Mount at bottom of dip-tube, seal with Teflon tape. PVDF, Hastelloy spring, PTFE ball, Viton FKM seal (3/8" male NPT inlet and outlet) PVDF, Hastelloy spring, Viton FKM seal (1/2" male NPT inlet and outlet) Use with DQM polypropylene dip-tube part number DQM DTUE PP35 & 55: Mount at bottom of dip-tube, must tap dip-tube first, seal with Teflon tape. High purity PF, Kalrez FFKM seal (1/2" female NPT inlet and outlet) For PTFE dip-tubes mount at bottom of dip-tube For polypropylene dip-tubes mount at bottom of dip-tube For UD Kit dip-tubes. Use with all DQ UD & ottlequik dip-tubes: Mount at bottom of dip-tube with integral compression fitting. DrumQuik Universal Drum daptor ung Plugs For your convenience, older offers several sizes of common drum bung plugs that have the internal 3/4" female NPS thread, into which the DrumQuik Universal Drum daptors/hemquik couplings are threaded. ouplings can be adapted to a wide range of closures. PRT NO. DQM UNGPP 2UT12 DQM UNGPP 2NPS12 DQM UNGPP 56X412 DQM PPP 70mm DESRIPTION ung closure, poly, 2" buttress x 3/4" female NPS ung closure, poly, 2" NPS x 3/4" female NPS ung closure, poly, S56 x 4, 3/4" female NPS ap closure, poly, 70mm, 3/4" female NPS opyright 2006 by older Products ompany. ll rights reserved. older Products ompany, older Products and P are registered trademarks with the US Patent & Trademark Office. 27

28 oupling ccessories hemquik Dual ontainment System The hemquik Dual ontainment System is an easy way to double contain critical chemical lines, protecting plant and personnel in case a primary process line ruptures or sweats. The system provides a protective secondary line to catch any fluid and routes it to a safe location. These fittings work with any hemquik coupling with fine thread flare terminations or a common flare style fitting. In addition, the panel mount version can be mounted into a pump cabinet or other panel mount connection point. The primary line can then be routed from the coupling directly to a pump, connected to a hemquik coupling or to a fitting at the panel mount fitting. The weep port serves to vent the area between the primary and secondary lines so that pressure cannot build up in case of a primary line rupture. The leaking fluid can then be routed to a containment vessel or to a leak detector. HP hemquik Dual ontainment Flare Nuts and Panel Mount Fittings (compatible with standard flare style fittings) PROESS LINE SEONDRY LINE NOTE: n FEP or PF corrugated tubing material is commonly used for the secondary line. These are available through older as special order items. Please contact factory for assistance. PNEL NUT PNEL PNEL MOUNT O-RING DUL ONTINMENT NUT onnect to hemquik coupling or any flare fitting. SEONDRY FLRE NUTS Materials: Dual containment nut and panel mount fitting: Virgin, natural polypropylene Flare nuts and panel nuts: PVDF Panel mount o-rings: Viton FKM NOTE: Other materials possible; contact factory for quote and lead time. DUL ONTINMENT PNEL MOUNT FITTING Line can continue through to pump or terminate in a coupling or fitting with flare WEEP PORT terminations. Vents area between primary and secondary line so that pressure does not build up. llows detection of possible leaks. PRT NO. DESRIPTION PNEL HOLE DIMETER (MINIMUM) Q DNUT 0408 Dual ontainment Flare Nut: 1/4 OD Process line x 1/2 OD secondary line N/ Q DNUT 0612 D Flare Nut: 3/8 x 3/4 N/ Q DNUT0812 D Flare Nut: 1/2 x 3/4 N/ Q DNUT1216 D Flare Nut: 3/4 x 1 N/ Q PM DNUT 0408 Panel Mount D Flare Fitting: 1/4 x 1/ (19.05mm) Q PM DNUT 0612 Panel Mount D Flare Fitting: 3/8 x 3/ (25.4mm) Q PM DNUT 0812 Panel Mount D Flare Fitting: 1/2 x 3/ (25.4mm) Q PM DNUT 1216 Panel Mount D Flare Fitting: 3/4 x (36.5mm) For accessories, see page 28. For dimensions, see page opyright 2006 by older Products ompany. ll rights reserved. older Products ompany, older Products and P are registered trademarks with the US Patent & Trademark Office.

29 oupling ccessories Dust aps and Plugs Dust caps and plugs will protect disconnected couplings from dirt or physical damage. PRT NO. DESRIPTION MTERILS OUPLING USED WITH QG06 D01 Dust ap HDPE QG06 QHV06 D01 Dust ap HDPE QH06 & QV06 QN06 D01 Dust ap HDPE QN06 QN08 D01 Dust ap HDPE QN08 QG06 DP01 Dust Plug HDPE QG06 QG06 DP01 Keyed Dust Plug HDPE Keyed version of QG06 QHV06 DP01 Dust Plug HDPE QH06 & QV06 QN06 DP01 Dust Plug HDPE QN06 QN06 DP01 Keyed Dust Plug HDPE Keyed version of QN06 QN08 DP01 Dust Plug HDPE QN08 QN08 DP01 Keyed Dust Plug HDPE Keyed version of QN08 HF 312L (with leash) Dust Plug/ap Vinyl HF12/QH06/QV06 NOTE: Dust caps are not pressure tight. Panel Mount daptors Panel mount adaptors work with coupling series that do not offer integrally-molded panel mount versions. The QN06 and NSH adaptors are unique in that they can be snapped on to either the coupling body or insert by engaging the internal fingers of the adaptor into the grooves located on both the body and insert, resulting in exceptional flexibility for system configuration. PRT NO. DESRIPTION MTERILS OUPLING USED WITH **QN06 PMKIT01 Panel Mount daptor HDPE with Viton Seals QN06 & QG06 QN08 PMKIT01 Panel Mount daptor PTFE with Viton Seal, ETFE Screws QN08 NSH PMKIT12 Panel Mount daptor Gray HDPE with EPDM Seal NSH **NOTE: The QN06 PMKIT comes with 2 spacers. Use one or both, depending on panel thickness (range is from 1/8"/3.2mm to 1/2"/12.7mm) to assure maximum holding force of panel mount adaptor on coupling. QG06 QN06 ø (50.8mm) HOLE MIN 5/16 18UN QN ø (51.2mm) HOLE MIN NSH ø (50.8mm) HOLE MIN MX PNEL THIKNESS = 1/2" (12.7mm) MX PNEL THIKNESS = 1/2" (12.7mm) opyright 2006 by older Products ompany. ll rights reserved. older Products ompany, older Products and P are registered trademarks with the US Patent & Trademark Office. 29

30 oupling ccessories olor-oding Options for the hemquik QH06 and QV06 Series QH06 and QV06 only available with color-coding; physical keys not available. olor-coded couplings are modified standard parts and are built to order. onsult factory for lead time. QH06 with color options. How to order: Part numbering for color-coded QH06 or QV06 product: QVD XXX YY (YY color code). If part is to include modified options, use the part number suffix XXX from modified product options section of the hemquik Price List before the color coding suffix YY as indicated to the right. oth thumb latch and flare nut are colored. PRT NO. YY OLOR ODE OLOR QVD XXX YY 01 RED (EXMPLE) 02 YELLOW 03 GREEN 04 ROWN 05 LUE 99 LK Physical Keying/olor-oding Options for the hemquik QG06, QN06 and QN08 Series QG06 and QN couplings available with non-interchangeable physical/mechanical keys and color-coding. Keyed couplings are modified standard parts and are built to order. onsult factory for lead time. QN08 with panel mount adaptor and color-coding. How to order: Part numbering for keyed QN or QG06 product: QN XXX YY (YY color code). If part is to include modified options, use the part number suffix XXX from modified product options section of the hemquik Price List before the color coding suffix YY as indicated to the right. NOTE: QG06 is available in 01Red and 05lue only. PRT NO. YY KEY ODE OLOR QN XXX YY 01 RED (EXMPLE) 02 YELLOW 03 GREEN 04 ROWN 05 LUE 99 LK NSH WHITE hemquik PVDF olor-oded Flare Nuts hemquik color-coded flare nuts are sold individually for use with any hemquik coupling or flare fitting commonly used with Teflon PF or FEP tubing. n ideal way to code any critical chemical line. olored flare nuts are stock items. olor-coded flare nuts. How to order: Part numbering for color-coded nuts: QH FNUT 06 YYY (3 character color code, e.g., GRN for green). PRT NO, DESRIPTION YYY OLOR ODE Q FNUT 04 YYY 1/4 OD tube size flare nut NT, RED, GRN, LU, EL, RN, LK Q FNUT 06 YYY 3/8 OD tube size flare nut NT, RED, GRN, LU, EL, RN, LK Q FNUT 08 YYY 1/2 OD tube size flare nut NT, RED, GRN, LU, YEL, RN, LK Q FNUT 12 YYY 3/4 OD tube size flare nut NT, RED, GRN, LU, YEL, RN, LK 30 opyright 2006 by older Products ompany. ll rights reserved. older Products ompany, older Products and P are registered trademarks with the US Patent & Trademark Office.

31 Drawings, samples and technical assistance are just a click away visit our Web site at Part Dimensions Dimensions are approximate. Drawings show only one termination, however, part numbers and dimensions are listed accurately for all terminations. For exact data please visit our web site and obtain downloadable drawings. QG06 In-Line odies PRODUT QGD Ø QGD Ø QGD Ø QGD Ø QG06 In-Line odies with Panel Mount daptor Installed PRODUT D QGD Ø2.00 QGD Ø2.00 QGD Ø2.00 QGD Ø2.00 panel thickness max D panel hole QG06 In-Line Inserts PRODUT QGD Ø1.62 QGD Ø1.62 QGD Ø1.62 QGD Ø1.62 QGD Ø1.62 connected length QG06 In-Line Inserts with Panel Mount daptor Installed PRODUT D E F G QGD Ø2.00 Ø QGD Ø2.00 Ø QGD Ø2.00 Ø QGD Ø2.00 Ø QGD Ø2.00 Ø panel thickness max D panel hole E G F back mounted front mounted QH/QV In-Line odies PRODUT QH/QV Panel Mount odies PRODUT D E panel thickness max = 0.25" (6.4mm) D panel hole = Ø1.121" (31mm) E opyright 2006 by older Products ompany. ll rights reserved. older Products ompany, older Products and P are registered trademarks with the US Patent & Trademark Office. 31

32 Drawings, samples and technical assistance are just a click away visit our Web site at Part Dimensions (continued) QH/QV In-Line Inserts PRODUT Ø Ø Ø Ø1.00 connected length QN06 In-Line odies PRODUT QND QND QND QND QND QN06 In-Line odies with Panel Mount daptor Installed PRODUT D E F G QND Ø2.00 Ø2.44 Ø QND Ø2.00 Ø2.44 Ø QND Ø2.00 Ø2.44 Ø QND Ø2.00 Ø2.44 Ø QND Ø2.00 Ø2.44 Ø G D panel hole required F E panel thickness max QN06 In-Line Inserts PRODUT QND Ø1.63 QND Ø1.63 QND Ø1.63 QND Ø1.63 QND Ø1.63 connected length QN06 In-Line Inserts with Panel Mount daptor Installed PRODUT D E F G H QND Ø2.00 Ø QND Ø2.00 Ø QND Ø2.00 Ø QND Ø2.00 Ø QND Ø2.00 Ø E connected length E D panel hole required panel thickness max back mounted G front mounted F 32 opyright 2006 by older Products ompany. ll rights reserved. older Products ompany, older Products and P are registered trademarks with the US Patent & Trademark Office.

33 QN08 In-Line odies PRODUT QND QND QND QND QN08 In-Line Inserts PRODUT D QND Ø QND Ø QND Ø QND Ø to panel mount flange D connected length 2.00 NSH In-Line odies PRODUT NSHD10006SPT Ø1.90 NSHD Ø1.90 NSHD Ø1.90 NSHD Ø1.90 NSHD Ø1.90 NSHD Ø1.90 NSHD Ø1.90 NSHD Ø1.90 NSH In-Line odies with Panel Mount daptor Installed PRODUT D E NSHD10006SPT 1.85 Ø Ø NSHD Ø Ø NSHD Ø Ø NSHD Ø Ø NSHD Ø Ø NSHD Ø Ø NSHD Ø Ø NSHD Ø Ø panel hole D NSH In-Line Inserts PRODUT NSHD Ø1.63 NSHD Ø1.63 NSHD Ø1.63 NSHD Ø1.63 NSHD Ø1.63 NSHD24006SPT Ø1.63 NSHD Ø1.63 NSHD Ø1.63 NSHD Ø1.63 connected length E panel thickness max opyright 2006 by older Products ompany. ll rights reserved. older Products ompany, older Products and P are registered trademarks with the US Patent & Trademark Office. 33

34 Drawings, samples and technical assistance are just a click away visit our Web site at Part Dimensions (continued) NSH Inserts with Panel Mount daptor ack Mounted PRODUT D E NSHD Ø Ø NSHD Ø Ø NSHD Ø Ø NSHD Ø Ø NSHD Ø Ø NSHD24006SPT 2.02 Ø Ø NSHD Ø Ø NSHD Ø Ø NSHD Ø Ø E max D panel hole NSH Inserts with Panel Mount daptor Front Mounted PRODUT D E NSHD Ø Ø NSHD Ø Ø NSHD Ø Ø NSHD Ø Ø NSHD Ø Ø NSHD24006SPT 2.60 Ø Ø NSHD Ø Ø NSHD Ø Ø NSHD Ø Ø E max D panel hole NS6 In-Line odies PRODUT NS6D Ø1.31 NS6D10008SPT Ø1.31 NS6D Ø1.31 NS6D Ø1.31 NS6D Ø1.31 NS6 In-Line Inserts PRODUT NS6D Ø1.31 NS6D Ø1.31 NS6D Ø1.31 NS6D Ø1.31 NS6D24008SPT Ø1.31 connected length NS6 Panel Mount Inserts PRODUT D E NS6D Ø Ø1.25 NS6D Ø Ø1.25 NS6D Ø Ø1.25 panel thickness max D E panel hole NS4 In-Line odies PRODUT NS4D Ø.96 NS4D10004SPT Ø.96 NS4D Ø.96 NS4D Ø.96 NS4D Ø.96 NS4D Ø opyright 2006 by older Products ompany. ll rights reserved. older Products ompany, older Products and P are registered trademarks with the US Patent & Trademark Office.

35 NS4 In-Line Inserts PRODUT NS4D Ø.96 NS4D Ø.96 NS4D Ø.96 NS4D Ø.96 NS4D Ø.96 NS4D24004SPT Ø.96 connected length NS4 Panel Mount Inserts PRODUT D E NS4D Ø Ø15/16 NS4D Ø Ø15/16 NS4D Ø Ø15/16 NS4D Ø Ø15/16 panel thickness max D E panel hole PRODUT D HF HF10612/HFD In-Line odies HF10612SPT/HFD10612SPT HF10812/HFD HF101212/HFD HF13612/HFD HF13812/HFD HF17612/HFD HF17812/HFD HF171012/HFD HF171212/HFD D hex HF Panel Mount odies PRODUT D E F G HF12612/HFD Ø1.21 HF12812/HFD Ø1.21 HF16612/HFD Ø1.21 HF16812/HFD Ø1.21 HF161012/HFD Ø1.21 HF161212/HFD Ø1.21 F panel thickness max E D panel hole G opyright 2006 by older Products ompany. ll rights reserved. older Products ompany, older Products and P are registered trademarks with the US Patent & Trademark Office. 35

36 Drawings, samples and technical assistance are just a click away visit our Web site at Part Dimensions (continued) HF In-Line Inserts PRODUT HF20612/HFD Ø1.00 HF20812/HFD Ø1.00 HF22612/HFD Ø1.00 HF22812/HFD Ø1.00 HF221012/HFD Ø1.00 HF221212/HFD Ø1.00 HF24612/HFD Ø1.00 HF24612SPT/HFD24612SPT Ø1.00 HF24812/HFD Ø1.00 HF241212/HFD Ø1.05 connected length HF Elbow Inserts PRODUT D HF23612/HFD Ø HF23812/HFD Ø HF231212/HFD Ø connected length D EF In-Line odies PRODUT D EFD EFD EFD EFD D hex EF Panel Mount odies PRODUT D E F G EFD Ø Ø11/16 EFD Ø Ø11/16 D E G panel hole EF In-Line Inserts PRODUT EF22412/EFD EF22612/EFD EFD EFD connected length EF Elbow Inserts PRODUT D EF23412/EFD Ø EF23612/EFD Ø connected length D 36 opyright 2006 by older Products ompany. ll rights reserved. older Products ompany, older Products and P are registered trademarks with the US Patent & Trademark Office.

37 Dual ontainment Nuts PRODUT QDNUT Ø QDNUT Ø QDNUT Ø QDNUT Ø Dual ontainment Panel Mount Fittings PRODUT D E F G QPMDNUT Ø Ø3/4 1/8 NPT QPMDNUT Ø Ø1.0 1/8 NPT QPMDNUT Ø Ø1.0 1/8 NPT QPMDNUT Ø Ø1-7/16 1/8 NPT D E panel thickness max G F panel hole Dust Plugs PRODUT QH06DP/QV06DP 1.03 Ø1.00 QG06DP 1.46 Ø1.50 QN06DP 1.30 Ø1.50 QN08DP 1.70 Ø1.75 Dust aps PRODUT QH06D/QV06D.88 Ø1.00 QG06D 1.25 Ø1.50 QN06D 1.25 Ø1.50 QN08D 2.10 Ø1.75 Panel Mount Kits PRODUT QN06PMKIT 01 QN08PMKIT 01 NSHPMKIT " hole Req d Ø opyright 2006 by older Products ompany. ll rights reserved. older Products ompany, older Products and P are registered trademarks with the US Patent & Trademark Office. 37

38 hemical oupling Material Descriptions POLYMERS Polypropylene Polypropylene is an excellent general purpose, low cost resin that is highly resistant to chemical attack from solvents and chemicals in very harsh environments. ontact with some chemicals, such as liquid hydrocarbons, chlorinated chemicals and oxidizing acids, can cause surface crazing and material swelling. In general, polypropylene is not susceptible to environmental stress cracking, and it can be exposed under load in the toughest environments. Resistance to weathering may be limited without the use of ultraviolet light absorbers or stabilizers (gray colored older couplings will be superior to uncolored versions). It may be subjected to degradation when exposed to certain conditions of ultraviolet radiation. Due to its higher crystallinity, polypropylene has excellent moisture barrier properties and good optical properties. Higher crystallinity improves stiffness, but reduces impact strength and it will become brittle when exposed to temperatures below freezing. PEEK Polyetheretherketon (PEEK), a unique semi-crystalline, is a high temperature resistant, engineered thermoplastic with excellent chemical and fatigue resistance, plus thermal stability. It exhibits superior mechanical and electrical properties. With a maximum continuous working temperature of 480 F (249 ) and superior chemical resistance. PEEK works effectively as a metal replacement in harsh environments. It is inert to all common solvents and resists a wide range of organic and inorganic liquids. It has a superior dielectric with low loss, even at high temperatures and frequencies. PEEK exhibits good radiation resistance, absorbing more than 1000 M rads of irradiation with no significant reduction in mechanical properties, and exhibits exceptional resistance to high doses of gamma radiation. Its outstanding wear, abrasion resistance and low coefficient of friction result in very low particle generation. It exhibits low smoke and toxic gas emissions (among the lowest of any thermoplastic material). PEEK, is an excellent material for a wide spectrum of applications where thermal, chemical and combustion properties and high purity are critical to performance. PPS Polyphenylene sulfide (PPS) polymer offers the broadest resistance to chemicals of any advanced engineering plastic. It has no known solvents below 392 F (200 ) and is inert to steam, strong bases, fuels, and acids. Minimal moisture absorption and a very low coefficient of linear thermal expansion make it ideal for precise-tolerance machined components. In addition, PPS products exhibit excellent electrical characteristics and are inherently flame retardant. PPS is an excellent alternative to PEEK at lower temperatures and in certain chemicals, e.g., sulfuric acid. FLUOROPOLYMERS PVDF Polyvinyliidene fluoride (PVDF) partially fluorinated polymer is a tough engineering thermoplastic with a balance of physical and chemical properties that qualify it for high performance in a wide range of applications. It is mechanically strong and tough, has good ductility, exhibits high dielectric strength, and has a broad, useful temperature range. s a fluoropolymer, PVDF is highly resistant to most environmental conditions, including corrosive chemicals, ultraviolet and gamma radiation, and is ideally suited to handling wet or dry chlorine, bromine and other halogens. Grades used by older are among the most pure of all commercial resins. They resist strong acids, solvents and reducing agents and are used in many industries, including microelectronic processing, chemical processing, pharmaceutical manufacturing, and laboratory uses. Their inherent chemical resistance, high purity and natural fire retardancy make them ideal for contact with high purity water, acids, chlorine, halogenated solvents, and petrochemical mixtures. PTFE Polytetrafluoroethylene (PTFE) is a crystalline molecular structure with a melting point of 621 F (327 ). It has exceptional resistance to chemicals, a density of 2.15g, a dielectric constant of 2.1, and a loss factor that is low and stable across wide temperature and frequency range. PTFE has useful mechanical properties from cryogenic temperatures to 500 F (260 ). It s coefficient of friction is lower than almost any other material. It also has a high oxygen level. PTFE is a fluorocarbon resin that is isostatically compression molded into various shapes. It is chemically resistant to all chemicals and solvents with the exception of some molten alkali metals, molten sodium hydroxide, elemental fluorine, and certain fluorinating agents. This unique chemical resistance stems from (1) the strong interatomic bonds between fluorine and carbon atoms, (2) shielding of the polymer s carbon atom backbone by fluorine atoms, and (3) high molecular weight. PTFE offers chemical resistance and stability at high temperature. Enhanced/Modified PTFE In many hemquik products, older utilizes Modified PTFE for critical components. esides retaining all the proven advantages of conventional PTFE, Enhanced or Modified PTFE offers some significantly improved properties: substantially lower deformation under load lower permeation due to denser polymer structure and fewer voids better weldability improved stress recovery, particularly at elevated temperatures smoother surface finishes higher transparency higher dielectric breakdown voltage PF PF is a perfluoroalkoxy copolymer resin. It combines the processing ease of conventional thermoplastic resins with the excellent properties of polytetrafluoroethylene (PTFE). Products manufactured from PF can offer continuous service temperatures up to 500 F (260 ). PF provides superior creep resistance at high temperatures, excellent low-temperature toughness and exceptional flame resistance. ETFE/PTFE Ethylene-hloroTriFluoro-Ethylene or ETFE, commonly known as Halar, and Poly-hloroTriFluoro-Ethylene or PTFE, commonly know as Kel-F, both have excellent corrosion/chemical resistance (similar to PTFE or PF), have superior toughness and physical properties, have excellent temperature limits, have low permeability and possess excellent electrical and fire retardant properties. oth fluoropolymers are high purity plastics suitable for use in ultra-pure applications. ELSTOMERS EPDM Ethylene-propylene-diene rubber (EPDM, also sometimes referred to as EPR) is produced using a third monomer. older uses the higher quality peroxidecured version. It provides exceptional resistance to temperatures through 300 F on a wide range of chemicals, and maintains good resistance to compression set and ozone. It is an ideal, reasonably-priced material for parts requiring a wide resistance to chemicals utilized and produced in the chlorine, caustic and bleach industries. Viton FKM Viton FKM is the most widely specified fluoroelastomer seal material, well known for its outstanding resistance to heat, oxidation, weathering, and ozone. It has outstanding resistance to a broad variety of fluids, including: aliphatic and aromatic hydrocarbons, halogenated fluids and strong acids. It has outstanding resistance to compression set and provides sealing performance and longevity unmatched by any non-fluorinated elastomer. These characteristics make Viton fluoroelastomer the perfect choice for demanding sealing applications. hemraz FFKM Perfluoroelastomers provide the broadest range of chemical resistance of any elastomeric material, combining the resilience and sealing force of an elastomer with the chemical resistance approaching that of PTFE. hemraz brand seals last longer and seal completely in harsh environments and a wide range of temperatures (-20 F to 615 F, -29 to 324 ). These critical process seals minimize microcontamination in wet and dry wafer fabrication and pharmaceutical processes. They can be utilized to provide minimal extractable ion content, significant plasma resistance, low particle generation, and high-dimensional stability, making these seals ideal for ultra high purity applications. hemraz is the cost-effective solution for the most difficult sealing problems in many industries, particularly fluid handling Simriz FFKM Simriz perfluoroelastomer seals are a cost-effective alternative to Kalrez and hemraz brand perfluoroelastomer seals. They provide essentially equivalent performance at a substantial cost savings. older offers Simriz seals optional on many coupling series. PF & FEP Encapsulated Seals Encapsulated seals are a hybrid seal combining an elastomeric core material with a fluoropolymer jacket typically made from PF, FEP or some other compound. The idea is to combine the resiliency of the elastomer with the superior chemical resistance of the fluoropolymer to achieve a seal that is lower cost than a pure fluoroelastomer FFKM seal. pplications are limited, but where appropriate, older uses these types of seals to achieve high chemical performance at a lower cost. 38 opyright 2006 by older Products ompany. ll rights reserved. older Products ompany, older Products and P are registered trademarks with the US Patent & Trademark Office.

39 Still Looking for That Perfect Solution? Even with thousands of standard quick disconnect couplings available, we know you still may not have found the precise part you need. That s why, for more than 25 years, older s pplication Engineering Team has worked with customers around the world to design custom coupling solutions to solve their specific problems and improve their products performance. older has solid modeling capabilities, prototype equipment, an expansive test lab, and thousands of solutions. ombine that with our years of experience and a can do attitude, and there is no need for you to design your solution alone. onsider a ustom-designed onnector When: quick disconnect will add value to your product, making it easier to use and more reliable Your requirements cannot be met by an existing standard older product Unique requirements, budgets or timing warrant your designer s collaboration with older s pplication Engineering Team Remember, standard catalog items generally have the advantage of quick availability and many times, lower cost, with no initial investment of time or money. However, depending on your volumes and technical requirements, it may make sense to work with our pplication Engineering Team to design a unique solution tailored for your needs. ustom designed products may be exclusively produced for a specific customer. These proprietary products might not be available for sale. ontact your local distributor for special application couplings. opyright 2006 by older Products ompany. ll rights reserved. older Products ompany, older Products and P are registered trademarks with the US Patent & Trademark Office. 39