Tour b Andersson AB THERMOSTATICALLY CONTROLLED RADIATOR VALVE RVT
|
|
|
- Emory Sims
- 5 years ago
- Views:
Transcription
1 Tour b Andersson AB THERMOSTATICALLY CONTROLLED RADIATOR VALVE RVT The RTV thermostatically controlled radiator valve is intended for use with 2-pipe pump-circulated hot water systems and is very effective in keeping the room temperature at a constant value and saving energy. On delivery the valve is provided with a plastic protecting Cap by means of which the valve can be controlled by hand until the thermostat unit is fitted. If there is to be a long period of hand control before fitting of the thermostat unit, handwheel is recommended. The RVT has a valve body of die cast AMETAL@ with bonnet of brass and spindle of stainless steel. Spindle sealing is by means of an O-ring which can be replaced if necessary without having to drain off the system. The sensing element, which is in the upper part of the handwheel contains an expansion medium consisting of wax and pulverised copper. The thermostat acts on the valve cone which regulates the water flow and thereby the heat given off by the radiator. All parts between the valve body and sensing element are made of heat-insulating material and are well ventilated to prevent heat from the valve affecting the sensing element. The desired temperature is set with the handwheel, the scale of which is marked 1-5. Alteration of the temperature is made by turning the handwheel towards the (+) or (-) positions. The temperature range can be limited to a maximum or minimum. The valve can also be locked at the desired temperature to prevent unauthorised adjustment. Valve body, straight (RVT 58) Valve body, angled (RVT 57) Valve body, reverse angle for horizontal head (RVT 59) Thermostat unit, fixed sensor (No. 50) Therrnostat unit, remote sensor (No. 60) Thermostat unit, remote head (No. 90) Handwheel (No. 55) Straight union Bent union All types of RVT valves can be connected to smooth tubes by means of the KOMBI compression coupling. The KOMBI compression coupling consists of a thrust screw and cone. A support sleeve must be used. For further information, see the KOMBI sheets under section 4. For connecting dimensions, see the following pages.
2 TECHNICAL DESCRIPTION Application: Heating installations, primarily for 2-pipe systems with pump circulation. Temperature range: 12-26O C (54-79" F) Regulation accuracy: - Within 2 1 C ( 2 1.8O F) Max. static pressure: 10 bar = 1.0 MPa 150 psi Max. differential pressure: Connection 10: 10 m WG kpa = 1 bar (14.2 lbf/in2) Connections 15 and 20: 5 m WG " 50 kpa = 0.5 bar (7.1 lbf/in2) Higher differential pressure can be permitted. (The above values refer to acceptable noise level.) Max. working temperature: Surface treatment: Length of capillary tube: Packing : Pressure drop: + 90' C (1 94O F) (Thermostat unit must not be subjected to a surface temperature higher than + 50' C (122O F) or lower than - 15' C (59O F.) 2 m, 5 m or 8 m. Applicable for valves with separate sensing element. The valves are packed in cardboard boxes according to packing list. The lines indicate the pressure drop in the valves at a temperature difference of lo C (1.8' F) and 2' C (3.6O F) respectively between room temperature and the value set on the valve. The size of valve is selected so that the necessary water flow is supplied to the radiator at a max. available temperature difference of 2' C (3.6' F). Water flow in Ils l, I I 1 1 r i 4 i Water flow in Ilh
3 THERMOSTATICALLY iolled 'OR VALVE RVT (RVT 58) Valve body straight Article number Neight kg 0,16 0,2 1 0, (RVT 57) Valve body, angle (RVT 59) Valve body, reverse angle for horizontal head (~0750) Thermostat head, fixed sensor 12-26' C (54-79' F) max 21' C (70' F) max 22' C (72' F) Weight 0.12 kg (No. 60) (No. 90) Thermostat unit, remote sensor Thermostat unit, te 69 -fl remote head -02 I 2-26' C (54-79' F) lax 21' C (70' F) lax 22' C (72' F) 2-26' C (54-79' F) 2-26' C (54-79' F) Length of capillary tube 2 m 2 m 2 m 5 m 8 m Weight -- C (No. 55) Handwheel - Weight 0.02 kg * Thermostat units with max. limitation to other temperatures can be supplied to special order. Page 15-3 Oct 78 1
4 Straight union Article number C KRK Jeight kg 0,05 0,09 0, Bent union All valves can be connected to smooth tubes by means of KOMBI compression couplings Connection R 1 Pipe (mm) R = Cylindrical pipe thread KR K = Short tapered pipe thread H =Fullyopenvalve KOM B I ordered separatel y. When ordering, specify article number of KOMBI coupling (58 Z%), connection R and pipe (mm). Example: x8. Further information concerning KOMBI couplings can be found under section 4. Bjorsell, BorBs
5 RVT Service sheet THERMOSTAT UNIT Material : M = Metal P = Plastic G = Rubber S = Steel (stainless) Page 15-5 Oct 78 1
6
Tour b Andersson AB THERMOSTATICALLY CONTROLLED RADIATOR VALVE RVT
Tour b Andersson AB THERMOSTATICALLY CONTROLLED RADIATOR VALVE RVT The RVT thermostatically controlled radiator valve is intended for use with 2-pipe pump-circulated hot water systems and is very effective
Tour b Andersson AB RADIATOR MANI FOLD RADIFIX HAND CONTROL THERMOSTATIC. Page 30-1 Oct 78 1
Tour b Andersson AB RADATOR MAN FOLD RADFX HAND CONTROL THERMOSTATC Radifix is a complete valved assembly for fitting on standard radiators. N Connection to the pipe system can be made from the side or
TRIM, TRIM A, RADITRIM A, TRIM K, STK, TA Loop
TOUR & ANDERSSON AB QUALITY AND ENVIRONMENT SYSTEM Certification of Registration Number 2125 and 2125 M Certified by SP TRIM, TRIM A, RADITRIM A, 1-15-5 TRIM K, STK, TA Loop Return valves and measurement
RADIATOR VALVE ACCESSORIES
RADIATOR VALVES ACCESSORIES RADIATOR VALVES CONTENTS Accessories and spare parts: Presetting tools Radiator connections Other connections (FPL, FPL-PX, KOMBI - see each catalogue leaflet) Radiator unions
RADIATOR VALVES / RADIATOR VALVES WITH PRESETTING
RAIATOR VAVES / RAIATOR VAVES WITH PRESETTING THERMOSTATIC RAIATOR VAVES WITH PRESETTING Thermostatic radiator valve primary for radiators in heating systems and secondary for small cooling terminals.
Thermostatic radiator valves with presetting
Thermostatic radiator valves TRV-2, TRV-2S Thermostatic radiator valves with presetting Pressurisation & Water Quality Balancing & Control Thermostatic Control ENGINEERING AVANTAGE Thermostatic radiator
STAF-SG. ANSI flanges. Balancing valves Size 3/4-16
STAF-SG ANSI flanges Balancing valves Size 3/4-16 IMI TA / Balancing valves / STAF-SG ANSI flanges STAF-SG ANSI flanges A flanged, ductile iron balancing valve that delivers accurate hydronic performance
STAF, STAF-SG. Balancing valves PN 16 and PN 25 DN
STAF, STAF-SG Balancing valves PN 16 and PN 25 DN 20-400 IMI TA / Balancing valves / STAF, STAF-SG STAF, STAF-SG A flanged, cast iron (STAF) and ductile iron (STAF-SG) balancing valve that delivers accurate
STAF-SG. ANSI flanges. Balancing valves DN
STAF-SG ANSI flanges Balancing valves DN 20-400 IMI TA / Balancing valves / STAF-SG ANSI flanges STAF-SG ANSI flanges A flanged, ductile iron balancing valve that delivers accurate hydronic performance
STAF, STAF-SG. Balancing valves PN 16 and PN 25 DN
STAF, STAF-SG Balancing valves PN 16 and PN 25 20-400 IMI TA / Balancing valves / STAF, STAF-SG STAF, STAF-SG A flanged, cast iron (STAF) and ductile iron (STAF-SG) balancing valve that delivers accurate
Floor heating manifold with automatic flow control
dynacon Floor heating manifold with automatic flow control Pressurisation & Water Quality Balancing & Control Thermostatic Control EnGInEERInG advantage dynacon adjusts the flow rate in the individual
High capacity valve body, type RA-G
Application The RA-G valves are fitted with a grey protective cap. This protective cap must not be used as a manual shut off device. A special manual shut off device is available (code no. 013G3300). The
W91/W94 Series TEMPERATURE REGULATORS. Self-Operated Temperature Regulators. Design & Operation W91 Non-Indicating W94 Dial Thermometer
Design & Operation W91 Non-Indicating W94 Dial Thermometer Watson McDaniel reserves the right to change the designs and/or materials of its products without notice. 2010 Watson McDaniel Company CAPILLARY
Section 20. HVAC Valves & Products
Section 20 HVAC Valves & Products 0800 276 877 281 Herz Radiator Valves Type DR-T-90 Radiator Control valves with Pre-setting Function. Suitable for Conversion to Thermostatic Operation. Nickel Plated
Temperature Regulators
Temperature Regulators DESIGN & OPERATION DIAL THERMOMETER (Model 91400 only) BELLOWS OVERRANGE PROTECTION SPRING CAPILLARY TUBING CONNECTION SENSING BULB RANGE ADJUSTMENT SPRING CAP ADJUSTMENT SCREW BUSHING
Static Balancing Valve
Static Balancing Valve Series W-JP45X-16Q Sizes: DN50-DN300 APPLICATION The Series W-JP45X Static Balancing Valve is designed for flow balancing in cooling, heating or process water systems. Its measuring
Dynacon. Floor Heating Manifolds Floor heating manifold with automatic flow control
Dynacon Automatic Flow Control Floor Heating Manifolds Floor heating manifold with automatic flow control IMI HEIMEIER / Floor Heating Control / Dynacon Dynacon Dynacon adjusts the flow rate in the individual
dynacon floor heating manifold with automatic flow control
dynacon floor heating manifold with automatic flow control Pressurisation & Water Quality Balancing & Control Thermostatic Control EnGInEERInG advantage Dynacon Description HEIMEIER Dynacon floor heating
Mikrotherm F. Manual Radiator Valves With presetting
Mikrotherm F Manual Radiator Valves With presetting IMI HEIMEIER / Thermostatic Heads & Radiator Valves / Mikrotherm F Mikrotherm F The Mikrotherm F manual radiator valve is used in warm water pump heating
Thermostatic actuator RAVI - for 2-way valves RAV-/8 (PN 10), VMT-/8 (PN 10), VMA (PN 16)
- for 2-way valves RAV-/8 (PN 10), VMT-/8 (PN 10), VMA (PN 16) Description RAVI is self-acting thermostatic actuator primarily for use for temperature control of small hot water cylinders - either storage
Powers Controls Powertop Two-Way Valves Normally Open
Powers Controls Powertop Two-Way s Normally Open VP 658-5 Description The VP 658 normally open valves are pneumatically operated valves designed to control the flow of both water and steam. Features Stainless
SECTION PIPING SPECIALTIES PART 1 GENERAL 1.1 SUMMARY
SECTION 230533 - PIPING SPECIALTIES PART 1 GENERAL 1.1 SUMMARY A. Section Includes: 1. Pressure gages. 2. Pressure gage taps. 3. Thermometers. 4. Thermometer supports. 5. Test plugs. 6. Static pressure
Rod thermostat with micro switch
Data sheet 60.1530 Page 1/6 Rod thermostat with micro switch STMA type series Particularities with micro switch Aluminum die cast case Protection class IP 54 high over-temperature security high response
Manual presetting valve MSV-C
Description / Application MSV-C is used for balancing the flow in cooling, heating and domestic water systems. MSV-C is a combined manual presetting valve with following features: Fixed measurement orifice.
HERZ 7217 V. Integral Fixed Orifice Control Valve HERZ 7217 V. Data sheet 7217 V, Issue Size in mm. STRÖMAX Fig No DN L Lm Rp H SW kv kvs
HERZ 7217 V Integral Fixed Orifice Control Valve Data sheet 7217 V, Issue 1011 Size in mm STRÖMAX Fig No DN L Lm Rp H SW kv kvs TS-V LF 1 7217 50 15 83 28,5 1/2 41 27 0,07-0,45 0,48 TS-V MF 1 7217 59 15
Valve bodies type RA-N with integrated presetting
Data Sheet Application Straight version Angle version Left mounted angle version Horizontal angle version All RA-N valve bodies can be used together with all types of thermostatic elements in the RA 2000
underfloor heating PRODUCTS FOR UNDERFLOOR HEATING
underfloor heating PRODUCTS FOR UNDERFLOOR HEATING Table of Contents LK 420 Minishunt... 3 LK 421 Manifold Shunt... 4 LK 422 Manifold Shunt... 5 Spare Parts and Accessories... 6 LK 430 Manifold... 7 LK
three-way mixing valve
three-way mixing valve with or without presetting, for heating and cooling systems. Pressurisation & Water Quality alancing & Control Thermostatic Control engineering avantage Three-way mixing valve, with
COOLING SYSTEM - V8. Cooling system component layout DESCRIPTION AND OPERATION
Cooling system component layout 26-2-2 DESCRIPTION AND OPERATION 1 Heater matrix 2 Heater return hose 3 Heater inlet hose 4 Heater inlet pipe 5 Throttle housing 6 Connecting hose 7 Throttle housing inlet
FHV control valves are flexible to use, easily installed and are available in two versions:
FHV-A/FHV-R Application: FHV-A FHV-R The floor-heating valve (FHV) provides an economical method of incorporating a radiant floor heating system into an existing hot water or radiator system. FHV self-acting
Angle Pattern Thermostatic Radiator Valve Vertical or horizontal mounting (15mm)
Angle Pattern Thermostatic Radiator Valve Vertical or horizontal mounting (15mm) GENERAL INFORMATION Size Pattern No. Pack 1 Qty Code Barcode 8mmx1/2 Angle Pattern TRV 1 632001 5013866012099 10mmx1/2 Angle
AVQMT. AVQT controller can be combined with AVT or STM thermostatic actuators.
Data sheet Flow and temperature controller with / without integrated control valve (PN 25) AVQT - flow and temperature controller AVQMT - flow and temperature controller with integrated control valve Description
LK Manifold Shunt VS2
LK Manifold Shunt VS2 Design LK Manifold Shunt VS2 is a shunt unit with a two way control valve used in systems with a primary pump. The shunt unit is mountable from both the left and right of LK Manifolds.
V5000, V5010 Kombi-3-plus BALANCING AND SHUTOFF VALVES
V5000 Kombi-3-plus RED V5000, V5010 Kombi-3-plus BALANCING AND SHUTOFF VALVES CONTENTS PRODUCT DATA Overview... 2 Design... 2 Materials... 2 Application... 2 Features... 2 Specifications... 2 Ordering
Dynamic Valve Type RA-DV Pressure Independent Radiator Valve
Dynamic Valve Type RA-DV Pressure Independent Radiator Valve Application RA-DV straight version RA-DV angle version RA-DV angle Right & Left RA-DV UK (Axial) RA-DV is a series of pressure independent radiator
Air-to-water heat pump for indoor installation - LIK 8TES. Spare parts list
Spare parts list Brand: Dimplex Type: LIK 8TES Part number: 366030 Position Description Part number Serv. ind. 1 Compressor 4522354115 2 Evaporator 4521612802 3 Expansion valve 4521614106 4 Inspection
Pressure independent combined control and balancing valves with independent EQM characteristics
Combined control & balancing valves TA-FUS1ON-P Pressure independent combined control and balancing valves with independent EQM characteristics Pressurisation & Water Quality Balancing & Control Thermostatic
Products for underfloor heating
ENG Products for underfloor heating Hydronic Solutions 1 Table of Contents LK 420 Minishunt... 3 LK 421 Manifold Shunt... 4 LK 422 Manifold Shunt... 5 Spare Parts and Accessories... 6 LK 430 Manifold...
TA-PILOT-R. Differential pressure controllers Pilot operated differential pressure controller with adjustable set-point
TA-PILOT-R Differential pressure controllers Pilot operated differential pressure controller with adjustable set-point IMI TA / Differential pressure controllers / TA-PILOT-R TA-PILOT-R The TA-PILOT-R
Pressure operated water valve Type WVFX and WVS
Data sheet Pressure operated water valve WVFX and WVS Pressure operated water valves types WVFX and WVS are used for regulating the flow of water in refrigeration plants with water-cooled condensers. The
Flow controller (PN 25) AVQ - return and flow mounting
Data sheet Flow controller (PN 5) - return and flow mounting Description is a self-acting flow controller primarily for use in district heating systems. The controller closes when set max. flow is exceeded.
Diaphragm Valves. Product information
Diaphragm Valves Product information ART 510 Diaphragm Valve Weir Type Features Screwed BSP Taper Ductile Iron Body Rising Handwheel Indicator Bonnet Diaphragm Available Grade A - Natural Rubber Grade
SECTION GENERAL-DUTY VALVES FOR PLUMBING PIPING
SECTION 22 05 23 PART 1 - GENERAL 1.1 SUMMARY A. Work Included: 1. Valves, General 2. Gate Valves 3. Balancing Valves 4. Ball Valves 5. Swing Check Valves 6. Backflow Prevention Assemblies 7. Pressure
Thermostatically controllable valves art. VD/VS/VCR/VCD/VCS xxxx
Thermostatically controllable valves art. VD/VS/VCR/VCD/VCS xxxx Thermostatically controllable valves have the purpose to cut-off, throttle and regulate flow rate through the heating body, since they are
STV DN 10-50, Balancing valve
STV DN -0, Balancing valve High accuracy Easy to adjust Quick to commission Dimension: DN -0 Temperature: -0 C till + C Pressure class: PN 0 June 0 rev. Description STV (M,F,G) DN -0 Application The manual
Automatic balancing valves ASV-PV DN (3rd gen.)
Automatic balancing valves ASV-PV DN 50-100 (3rd gen.) Description / Application Partner valve ASV-PV DN 50 ASV-PV DN 65-100 MSV-F2 DN 50-100 ASV balancing valves are used for dynamic hydronic balance
I-799/79V Coil Components
WARNING Read and understand all instructions before attempting to install any Victaulic products. Depressurize and drain the piping system before attempting to install, remove, or adjust any Victaulic
LK 820 ThermoVar. Technical Data. Thermic Valves and Check Valves. Opening temperatures 45 C, 55 C, 61 C, 66 C, 72 C or 80 C.
LK 820 ThermoVar Technical Data Opening temperatures 45 C, 55 C, 61 C, 66 C, 72 C or 80 C Working temperature, 45 C - 55 C Working temperature, 61 C - 80 C Ambient temperature Max. working pressure Max.
Pressure Sensors. for liquid and gaseous media
1 909 1909P01 Pressure Sensors for liquid and gaseous media QBE2002-P QBE2102-P Piezo-resistive measuring system DC 0...10 V or DC 4 20 ma output signal Measurement unaffected by changes in temperature
Guide Specification SECTION HYDRONIC PIPING SPECIALTIES PART 1 - GENERAL 1.1 SUMMARY
SECTION 23 21 16 - HYDRONIC PIPING SPECIALTIES PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Pressure gages. 2. Pressure gage taps. 3. Thermometers. 4. Thermometer supports. 5. Test plugs. 6. Air
Thermostat for shipbuilding Switching differential Not adjustable
Navistat Swiss based Trafag is a leading international supplier of high quality sensors and monitoring instruments for the measurement of pressure and temperature. s Applications Shipbuilding Engine manufacturing
* T Temperature-Indicating Dial (Must be field set and calibrated to an actual thermometer)
175/153 Series Watson McDaniel reserves the right to change the designs and/or materials of its products without notice. 2006 Watson McDaniel Company 175 HEATING 153 COOLING 175 / 153 Screwed Connection
How to Order 02 1/4. Thread type Nil Rc N NPT * * Semi-standard
Filter Regulator IW Series Two types are available: adjustable set pressure type and fixed set pressure type. Low/High temperature and external parts copper-free types can be selected. Pressure gauge connecting
Temperature controller AVT with safety temperature monitor STM / VGS for steam (PN 25)
Data sheet Temperature controller AVT with safety temperature monitor STM / VGS for steam (PN 25) Description Controller closes on rising temperature. The controllers are: - Type-tested acc. to EN 14597
High Pressure Service Cage type Double Seated Control Valves (Rating: ANSI 900 to 2500)
High Pressure Service Cage type Double Seated Control Valves (Rating: ANSI 900 to 2500) Model VDC OVERVIEW Model VDC high pressure service control valve with body rating of ANSI 900, JIS 63K or up provides
TECHNICAL INSTRUCTIONS #11 REGULATOR Single Seat - Bronze Trim - Composition Disc
Page 1 TI595CD A Watts Industries Co. TECHNICAL INSTRUCTIONS #11 REGULATOR Single Seat - Bronze Trim - Composition Disc VALVE DESCRIPTION TABLE OF CONTENTS The Powers #11 Regulator is a self-actuating
TEMPERATURE REGULATORS W91/W94 Series
Self-Operated Temperature Regulators Watson McDaniel reserves the right to change the designs and/or materials of its products without notice. 2010 Watson McDaniel Company Self-Operating Design Indicating
RTL. Floor Heating Controller Return temperature limiter with and without presetting
RTL Floor Heating Controller Return temperature limiter with and without presetting IMI HEIMEIER / Floor Heating Control / RTL RTL Among other things, the return temperature limiter RTL is used to limit
950x. Description. Part List
Via Circonvallazione, 308 Valduggia (VC), Italy Tel: +39 063 4789 Fax: +39 063 47895 950x Variable Orifice Bronze Double Regulating Valve valvoindustria ing.rizzio s.p.a. Description Variable orifice bronze
3-port seat valves, external thread, PN16
4 464 3-port seat valves, external thread, PN6 VXG44.. ronze CC49K (Rg5) valve body DN 5..DN 40 k vs 0.25..25 m 3 /h Flat sealing connections with external thread G to ISO 228- Sets of ALG..3 screwed fittings
NE January 2016 SINGLE SEATED CAGE VALVES SERIES 9100 MODEL Previously manufactured by Dezurik and Honeywell
391.01-3NE January 2016 SINGLE SEATED CAGE VALVES SERIES 9100 MODEL 9101 Previously manufactured by Dezurik and Honeywell Description: Model 9101 valve combines a heavy, duty, single-seated, cage-type
Fan-coil valves Series
Fan-coil valves Series 11-11 - 411 Main features Complete range in the following versions : -way - DN: 1/, /4, 1 -way - DN: 1/, /4, 1 -way with 4 ports - DN: 1/, /4 - The -way version and the -way versions
Product Catalog. Our Products. DCI Dynamic Instruments Website: dcidynamic.com
1 Product Catalog Our Products We at Dynamic are proud to present out new technical catalogue detailing our extensive range of Pressure Gauges, Thermometers, diaphragm seal, transmitter and accessories.
Contact dial thermometer
Data Sheet 608523 Page 1/8 Contact dial thermometer Special features Temperature controller with process value display as panel-mounting or add-on device Class 1.5 Protection rating IP 65 Case sizes :
Flow controller (PN 25) AVQ - return and flow mounting
Data sheet Flow controller (PN 5) - return and flow mounting Description is a self-acting flow controller primarily for use in district heating systems. The controller closes when set max. flow is exceeded.
Distributed By: M&M Control Service, Inc PRODUCT PRODUCT CODE RESOURCE DOCUMENTS PAGE #
PRODUCT PRODUCT CODE RESOURCE DOCUMENTS PAGE # Pneumatic Receiver-Controllers Single Input Receiver-Controller RC 195 155-119P25 C-3 Multiple Input Receiver-Controller RC 195 155-036P25 C-5 Pneumatic Transmitters
MODELS BMSY 154 (9.39) 125 (7.63)
MDES BMSY The BMSY series motor adapts the advanced RRTRC gear set design with DISC distribution fl ow and high pressure. These motors can be supplied with various options for multifunctional operations
V2880, Therafix Design Thera Design Edition - H-Block with TRV Insert WITH HIGH QUALITY SURFACE FOR DESIGN RADIATORS
W GE R MAN Y W GE R MAN Y V2880, Therafix Design Thera Design Edition - H-Block with TRV Insert WITH HIGH QUALITY SURFACE FOR DESIGN RADIATORS Design Angle left Straight W GE R MAN Y Angle right The Therafix
Globe valves Shut-off check valve 200 AE/BE PN DN Globe valves Lift check valve 240 MT PN DN 10-50
Globe valves Shut-off check valve 200 AE/BE PN 10-160 DN 10-50 Globe valves Lift check valve 240 MT PN 10-160 DN 10-50 Admissible operating pressure [bar] at design temperature [ C] 1) Material PN -200-60
TECHNICAL CATALOGUE DISTRIBUTION MANIFOLDS
TECHNICAL CATALOGUE DISTRIBUTION TEC ITAP SpA, founded in Lumezzane (Brescia) in 972, is currently one of the leading production companies in Italy of valves, fittings and distribution manifolds for plumbing
Installation Procedures
For the precision ball and roller bearings supplied by MRC Bearings, skill and cleanliness while handling, mounting and dismounting are necessary to ensure satisfactory bearing performance. As precision
Regutec F. Return Lockshield Radiator lockshield
Regutec F Return Lockshield Radiator lockshield IMI HEIMEIER / Thermostatic Heads & Radiator Valves / Regutec F Regutec F The Regutec lockshield is used in pumped warm water heating and air conditioning
Contact Dial Thermometer
Data sheet 608523 Page 1/8 Contact Dial Thermometer Special features Class 1.5 Display range -40 C to +600 C Temperature controller with actual value display as built-in or add-on device in the stainless
V4043 and V4044 Motorized Valves
V03 and V0 Motorized Valves INSTALLATION INSTRUCTIONS FEATURES V0 These valves consist of an actuator motor and valve assembly for controlling the flow of hot or cold water. The V03 provides 2-position,
Fire-fighting equipment
Fire-fighting equipment Sweden s leading manufacturer of fire-fighting equipment Most of the hardware for water-based fire-fighting, in terms of valves, nozzles, hydrants etc. used in Sweden today comes
TA-FUS1ON-P. Combined control & balancing valves Pressure independent combined balancing and control valves with independent EQM characteristics
TA-FUS1ON-P Combined control & balancing valves Pressure independent combined balancing and control valves with independent EQM characteristics IMI TA / Control valves / TA-FUS1ON-P TA-FUS1ON-P These innovative
Thermo. operated water valve Type WVTS
Data sheet Thermo. operated water valve Type WVTS Thermo. operated water valve type WVTS is suitable for controlling the temperature of a flow of water or neutral brine. WVTS opens on rising sensor temperature
Accessories. UP timer. Timer control. Approvals. UP Series
UP timer Specifications (previous/current) Type: 24 Hr. 3-position On/Timer/Off 15-minute interval Size: 3.77 x 2.85 x 1.25" Supply voltage: 120 VC Power consumption: 1 V Switch rating: SPT Resistive:
TA-Mini-Fast-Fit. Prefab units Fabricated solutions for small terminal units
TA-Mini-Fast-Fit Prefab units Fabricated solutions for small terminal units IMI TA / Control valves / TA-Mini-Fast-Fit TA-Mini-Fast-Fit Compact pressure independent solution for modulating or on/off control.
CALEFFI. Differential pressure by-pass valve. 519 series 01007/14 NA. Replaces 01007/12 NA
ifferential pressure by-pass valve RIT LFFI series / N ISO FM ISO No. Replaces / N Function The differential pressure by-pass valve is used in systems with a fixed speed circulating pump supplying several
Series IW. Filter Regulator
Standard Specifications Model IW212 IW213 IW215 IW222 Adjustable type (Basic) Fixed type Maximum supply pressure Max. 1. MPa.3 to 1. MPa Set pressure.2 to.2 MPa.2 to.3 MPa.2 to.5 MPa.14 MPa Air consumption
STYLE B THERMOSTATIC TEMPERATURE REGULATOR
STYLE B THERMOSTATIC TEMPERATURE REGULATOR MIL-V-19772A and MIL-DTL-19772B TYPE I (3-WAY) / TYPE II CLASS 1 / TYPE II CLASS 2 WITH MANUAL OVERRIDE and OVERHEAT PROTECTION SUITABLE FOR SHIPBOARD SERVICE
SRG LPG Liquid Service/Offtake Valve Type /
SRG LPG Liquid Service/Offtake Valve Type 480-426 / 480-427 Inlet Connection Outlet Connection Width across flats ¾ NPT 1 ¼ NPT M26x1,814 36 mm 46 mm Product Description: The SRG type 480 liquid service
Please refer to our catalogue for details of the full product range
Thermostatic Radiator Valve Bodies Series V6 - Double Regulating Function ngle Pattern 118 37 63 118 37 64 11.10 11.10 EPDM disk & seals (see note below) F x MU ends Thermostat connection thread M30 x
ROTARY MOTORIZED VALVES ROTARY MOTORIZED VALVES
ROTARY MOTORIZED VALVES 5 6 ESBE ROTARY VALVES AND ACTUATORS regulate the heating comfort of millions of households. Our offer is a wide range of rotary valves in a number of different designs for the
Temperature controller (PN 25) AVT / VG - external thread AVT / VGF - flange
Data sheet Temperature controller (PN 25) AVT / VG - external thread AVT / VGF - flange Description AVT / VG The AVT / VG(F) controller is a self-acting proportional temperature controller developed primarily
Pressure relief controller AVA (PN 25)
Data sheet Pressure relief controller AVA (PN 25) Description AVA is a self-acting pressure relief controller primarily for use in district heating systems. The controller is normally closed and opens
High Capacity Valve Body, Type RA-G
Data Sheet The RA-G valves are fitted with a grey protective cap. This protective cap must not be used as a manual shut off device. A special manual shut off device is available (code no. 013G3300). Application
*Attachment A 1 SCOPE 1.1 This Standard covers cast copper alloy: (a) threaded pipe flanges and blind flanges having rating class designations 150, 300, 600, 900, 1500, and 2500, (b) flanged fittings having
V2000BB BB type TRV Body RADIATOR VALVE WITH BROADBAND CARTRIDGE
V2000BB BB type TRV Body RADIATOR VALVE WITH BROADBAND CARTRIDGE PRODUCT DATA Angle to EN215 (D) 011 Straight to EN215 (D) Application Thermostatic radiator valve bodies (TRV bodies) are fitted on the
3-Port Seat Valves with Male Thread, PN 16
6 3-Port Seat Valves with Male Thread, PN 6 VXG ronze CC9K (Rg5) valve body DN 5DN 0 k vs 02525 m 3 /h Flat sealing connections with external thread G to ISO 228/ Sets of ALG 3 screwed fittings with threaded
4-Way Mixing Panel Submittal - Page 1 of 6
Submittal - Page 1 of 6 Job or Customer : Location : Engineer : Complies with Spec Alternate Notes : Contractor : Heat Rep : Submitted By : Date : Approved By : Date : P.O. Number : Date : Description
Valid from
Range 202 / 203 Valid from 0..202 General General information, technical data HERZ-Thermostatic valves Thermostatic heads and valves marked with the CENCER mark of conformity in the HERZ- Range have been
ROTARY MOTORIZED VALVES ROTARY MOTORIZED VALVES
ROTARY MOTORIZED VALVES 19 CONTENTS ROTARY MOTORIZED VALVES INTRODUCTION AND SELECTION GUIDES Series VRG130 DN 15 50, Kvs 0.4 40, PN10 33 34 35 Series VRG140 DN 15 50, Kvs.5 40, PN10 CHANGE-OVER/DIVERTING
Flow controller with integrated control valve (PN 16) AVQM - return and flow mounting
Data sheet Flow controller with integrated control valve (PN 16) AVQM - return and flow mounting Description The controller has a control valve with adjustable flow restrictor, connection neck for electrical
3-Port Seat Valves with Male Thread, PN 16
4 463 3-Port Seat Valves with Male Thread, PN 16 VXG41 Use Media Bronze CC491K (Rg5) valve body DN 15DN 50 k vs 1640 m 3 /h Flat sealing connections with external thread G B to ISO 228/1 Sets of ALG 3
Pressure and temperature controls, Type CAS
MAKING MODERN LIVING POSSIBLE Pressure and temperature controls, Type CAS The CAS Series consists of a series of pressure controlled switches and temperature controlled switches. In this series, special
Temperature controller for heating (PN 25) AVT / VG - external thread AVT / VGF - flange
Data sheet Temperature controller for heating (PN 25) AVT / VG - external thread AVT / VGF - flange Description AVT / VG AVT / VGF The AVT / VG(F) controller is a self-acting proportional temperature controller
T100A,F,M Controllers
T100A,F,M Controllers THERMOSTATIC VALVE ACTUATORS INSTALLATION INSTRUCTIONS APPLICATION The T100 Controllers are used with V100 Valves to control radiators, convectors, baseboard heating units, or other
W22 Medium Voltage Motors TEFC - Severe Duty
101 www.pamensky.com W22 Medium Voltage Motors TEFC - Severe Duty Standard Features Three-phase, 2, 4, 6 and 8 pole, 60Hz Voltage: 1200V, 2300V, 2400V, 3300V, 4000V, 4160V & 6600V Totally Enclosed Fan